VinaR - Repozitorijum Instituta za nuklearne nauke Vinča
    • English
    • Српски
    • Српски (Serbia)
  • Srpski (latinica) 
    • Engleski
    • Srpski (ćirilica)
    • Srpski (latinica)
  • Prijava
Pregled zapisa 
  •   VinaR
  • Vinča
  • Radovi istraživača
  • Pregled zapisa
  •   VinaR
  • Vinča
  • Radovi istraživača
  • Pregled zapisa
JavaScript is disabled for your browser. Some features of this site may not work without it.

Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium

Thumbnail
2023
Preuzimanje 🢃
Main article [PDF] (5.841Mb)
Autori
Knežević, Sanja
Ivanović, Marija
Stanković, Dalibor M.
Kisić, Danilo
Nenadović, Snežana
Potočnik, Jelena
Nenadović, Miloš
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentu
Apstrakt
The following investigation presents the thermal treatment of geopolymer at 300 °C, 600 °C and 900 °C. We investigated what happens to the geopolymer base when incorporated with 1% and 5% of neodymium in the form Nd2O3. A total of six samples were synthesized. Geopolymer 1 contained 1% and geopolymer 2 contained 5% Nd2O3, and these samples were treated at 300 °C; then, samples geopolymer 3 and geopolymer 4 also had the same percentage composition of Nd2O3 and were treated at 600 °C, while samples geopolymer 5 and geopolymer 6were treated at 900 °C. Physical and chemical changes in the aluminosilicate geopolymer matrix were monitored. The incorporation of rare earths into the polymer network of aluminosilicates has been proven to disrupt the basic structure of geopolymers; however, with increased temperatures, these materials show even more unusual properties. Diffuse reflectance infrared Fourier transform (DRIFT) analysis showed that the intensity of the vibrational band decreases with... the increase in temperature during thermal treatment, suggesting alterations in the chemical structure of the geopolymers. Transmission electron microscopy (TEM) analysis showed that the diameter of the nanoparticles containing Al2O3 is in the range 5–10 nm, while larger crystallites range from 30 to 80 nm. Scanning electron microscopy (SEM) analysis revealed that the temperature of the thermal treatment increases to 300 °C and 600 °C; the porosity of geopolymer increases in the form of the appearance of large pores and cracks in material. X-ray photoelectron spectroscopy (XPS) analysis was used to investigate the surface chemistry of geopolymers, including the chemical composition of the surface, the oxidation state of the elements, and the presence of functional groups. The UV/Vis spectra of the synthesized geopolymers doped with Nd3+ show interesting optical properties at 900 °C; the geopolymer matrix completely disintegrates and an amorphous phase with a rare-earth precipitate appears.

Ključne reči:
DRIFT / geopolymer / Nd2O3 / rare earth / SEM / TEM / XPS
Izvor:
Nanomaterials, 2023, 13, 10, 1663-
Finansiranje / projekti:
  • Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200017 (Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd-Vinča) (RS-MESTD-inst-2020-200017)

DOI: 10.3390/nano13101663

ISSN: 2079-4991

WoS: 000997026900001

Scopus: 2-s2.0-85160405859
[ Google Scholar ]
5
5
URI
https://vinar.vin.bg.ac.rs/handle/123456789/11074
Kolekcije
  • 040 - Laboratorija za atomsku fiziku
  • 170 - Laboratorija za materijale
  • Radovi istraživača
Institucija/grupa
Vinča
TY  - JOUR
AU  - Knežević, Sanja
AU  - Ivanović, Marija
AU  - Stanković, Dalibor M.
AU  - Kisić, Danilo
AU  - Nenadović, Snežana
AU  - Potočnik, Jelena
AU  - Nenadović, Miloš
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11074
AB  - The following investigation presents the thermal treatment of geopolymer at 300 °C, 600 °C and 900 °C. We investigated what happens to the geopolymer base when incorporated with 1% and 5% of neodymium in the form Nd2O3. A total of six samples were synthesized. Geopolymer 1 contained 1% and geopolymer 2 contained 5% Nd2O3, and these samples were treated at 300 °C; then, samples geopolymer 3 and geopolymer 4 also had the same percentage composition of Nd2O3 and were treated at 600 °C, while samples geopolymer 5 and geopolymer 6were treated at 900 °C. Physical and chemical changes in the aluminosilicate geopolymer matrix were monitored. The incorporation of rare earths into the polymer network of aluminosilicates has been proven to disrupt the basic structure of geopolymers; however, with increased temperatures, these materials show even more unusual properties. Diffuse reflectance infrared Fourier transform (DRIFT) analysis showed that the intensity of the vibrational band decreases with the increase in temperature during thermal treatment, suggesting alterations in the chemical structure of the geopolymers. Transmission electron microscopy (TEM) analysis showed that the diameter of the nanoparticles containing Al2O3 is in the range 5–10 nm, while larger crystallites range from 30 to 80 nm. Scanning electron microscopy (SEM) analysis revealed that the temperature of the thermal treatment increases to 300 °C and 600 °C; the porosity of geopolymer increases in the form of the appearance of large pores and cracks in material. X-ray photoelectron spectroscopy (XPS) analysis was used to investigate the surface chemistry of geopolymers, including the chemical composition of the surface, the oxidation state of the elements, and the presence of functional groups. The UV/Vis spectra of the synthesized geopolymers doped with Nd3+ show interesting optical properties at 900 °C; the geopolymer matrix completely disintegrates and an amorphous phase with a rare-earth precipitate appears.
T2  - Nanomaterials
T1  - Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium
VL  - 13
IS  - 10
SP  - 1663
DO  - 10.3390/nano13101663
ER  - 
@article{
author = "Knežević, Sanja and Ivanović, Marija and Stanković, Dalibor M. and Kisić, Danilo and Nenadović, Snežana and Potočnik, Jelena and Nenadović, Miloš",
year = "2023",
abstract = "The following investigation presents the thermal treatment of geopolymer at 300 °C, 600 °C and 900 °C. We investigated what happens to the geopolymer base when incorporated with 1% and 5% of neodymium in the form Nd2O3. A total of six samples were synthesized. Geopolymer 1 contained 1% and geopolymer 2 contained 5% Nd2O3, and these samples were treated at 300 °C; then, samples geopolymer 3 and geopolymer 4 also had the same percentage composition of Nd2O3 and were treated at 600 °C, while samples geopolymer 5 and geopolymer 6were treated at 900 °C. Physical and chemical changes in the aluminosilicate geopolymer matrix were monitored. The incorporation of rare earths into the polymer network of aluminosilicates has been proven to disrupt the basic structure of geopolymers; however, with increased temperatures, these materials show even more unusual properties. Diffuse reflectance infrared Fourier transform (DRIFT) analysis showed that the intensity of the vibrational band decreases with the increase in temperature during thermal treatment, suggesting alterations in the chemical structure of the geopolymers. Transmission electron microscopy (TEM) analysis showed that the diameter of the nanoparticles containing Al2O3 is in the range 5–10 nm, while larger crystallites range from 30 to 80 nm. Scanning electron microscopy (SEM) analysis revealed that the temperature of the thermal treatment increases to 300 °C and 600 °C; the porosity of geopolymer increases in the form of the appearance of large pores and cracks in material. X-ray photoelectron spectroscopy (XPS) analysis was used to investigate the surface chemistry of geopolymers, including the chemical composition of the surface, the oxidation state of the elements, and the presence of functional groups. The UV/Vis spectra of the synthesized geopolymers doped with Nd3+ show interesting optical properties at 900 °C; the geopolymer matrix completely disintegrates and an amorphous phase with a rare-earth precipitate appears.",
journal = "Nanomaterials",
title = "Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium",
volume = "13",
number = "10",
pages = "1663",
doi = "10.3390/nano13101663"
}
Knežević, S., Ivanović, M., Stanković, D. M., Kisić, D., Nenadović, S., Potočnik, J.,& Nenadović, M.. (2023). Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium. in Nanomaterials, 13(10), 1663.
https://doi.org/10.3390/nano13101663
Knežević S, Ivanović M, Stanković DM, Kisić D, Nenadović S, Potočnik J, Nenadović M. Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium. in Nanomaterials. 2023;13(10):1663.
doi:10.3390/nano13101663 .
Knežević, Sanja, Ivanović, Marija, Stanković, Dalibor M., Kisić, Danilo, Nenadović, Snežana, Potočnik, Jelena, Nenadović, Miloš, "Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium" in Nanomaterials, 13, no. 10 (2023):1663,
https://doi.org/10.3390/nano13101663 . .

DSpace software copyright © 2002-2015  DuraSpace
O repozitorijumu VinaR | Pošaljite zapažanja

re3dataOpenAIRERCUB
 

 

Kompletan repozitorijumGrupeAutoriNasloviTemeOva institucijaAutoriNasloviTeme

Statistika

Pregled statistika

DSpace software copyright © 2002-2015  DuraSpace
O repozitorijumu VinaR | Pošaljite zapažanja

re3dataOpenAIRERCUB