Претраживање
Приказ резултата 1-10 од 10
Pulse deposition of Au on graphite
(Thin Solid Films, 1996)
In this paper we present pulse deposition as a new method to favor the self-assembly of nanostructured materials. Nucleation and growth of gold thin layers deposited on highly oriented pyrolytic graphite substrate have ...
Influence of plasma nitriding on mechanical and tribological properties of steel with subsequent PVD surface treatments
(Thin Solid Films, 1998)
The wear and friction of TiN and (Ti, AI)N coatings were tested in combination with plasma nitrided hardened tool steel. Dry-sliding pin-on-ring tests were carried out. Wear behavior, coefficient of friction and contact ...
The influence of ion bombardment intensity during deposition on nickel films microstructure
(Thin Solid Films, 1999)
Nickel films were deposited from a vapour phase (e-gun source) onto amorphous glass substrates at room temperature during a simultaneous bombardment with nitrogen ions at low pressure (4 x 10(-2) Pa). Under a constant ...
TEA CO2 laser-induced damage of low-thickness TiN coatings
(Thin Solid Films, 1999)
In this work the changes induced by TEA CO laser with different pulse shape on low thickness TiN coatings were considered. The TiN layer (0.85 mu m) was deposited by sputtering. The bombardment of coatings was performed ...
Synthesis and deposition of ZnO based particles by aerosol spray pyrolysis
(Thin Solid Films, 1997)
Spray pyrolysis was used for the deposition of well defined submicronic to nanosize particles based on ZnO. The influence of the temperature in the range from 345 to 1165 K, solution concentration (0.004 and 1.5 mol dm(-3)) ...
Investigation of ion beam mixing effects in Ta/Pd bilayers deposited on Si
(Thin Solid Films, 1998)
This paper presents a study of the effects of As+ ion irradiation and vacuum thermal treatments on Ta/Pd bilayers on silicon. The layers were deposited by DC sputtering to the thickness of 60 nm (Pd) and 45 nm (Ta) on ...
Microstructural modification of TiN deposited by magnetron ion plating: Influence of magnetic field configuration
(Thin Solid Films, 1998)
Three operating modes of a single magnetron were used during deposition processes: balanced magnetron configuration with no external magnetic field and no bias potential applied (magnetron only), balanced magnetron ...
Effects of cemented carbide surface pretreatment in combustion flame chemical vapour deposition of diamond
(Thin Solid Films, 1999)
Effects of different pretreatment procedures on WC-6%Co surface modification and some properties of diamond coating deposited by combustion flame CVD on the pretreated surfaces have been systematically studied. The ...
Characteristics of large area silicon surface barrier detectors
(Thin Solid Films, 1997)
This paper presents a detailed description of an upgraded silicon surface barrier (SE) detector and analysis of X and gamma radiation and of the spectra given by it. The most frequently used application of these detectors ...
The effect of rapid thermal annealing on structural and electrical properties of TiB2 thin films
(Thin Solid Films, 1997)
This work reports on the effect of post-deposition rapid thermal annealing on the structural and electrical properties of deposited TiB2 thin films. The TiB2 thin films, thicknesses from 9 to 450 nm, were deposited by ...