An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles
Аутори
Mališić, VanjaTomić, Nataša
Vuksanović, Marija M.
Balanc, Bojana
Stević, Zoran
Marinković, Aleksandar D.
Jančić-Heinemann, Radmila
Putić, Slaviša
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat alumina particles (Al2O3) and alumina doped with iron oxide (Al2O3-Fe) modified with 3-aminopropyl-trimethoxylane (AM) and flax oil fatty acid methyl esters (biodiesel - BD) were used as reinforcement. Thermal conductivity measurements showed that composite with alumina particles with the highest alpha phase content had the highest thermal conductivity values. Mechanical properties (tensile strength, modulus of elasticity and elongation at break) were improved by the addition of modified alumina particles to PMMA/DMI matrix. The thermal properties are the most improved for composite with 3 wt.% Al2O3-Fe-AM particles that had the lowest temperature in a crack zone was noticed (10.28 %) compared to PMMA added due to the better stiffness and highest thermal conductivity....
Кључне речи:
Al2O3 particles / Reinforcement / Composite materials / Thermal propertiesИзвор:
Science of Sintering, 2020, 52, 4, 457-467Финансирање / пројекти:
- Развој опреме и процеса добијања полимерних композитних материјала са унапред дефинисаним функционалним својствима (RS-MESTD-Technological Development (TD or TR)-34011)
DOI: 10.2298/SOS2004457M
ISSN: 0350-820X
WoS: 000600505000007
Scopus: 2-s2.0-85098645745
Колекције
Институција/група
VinčaTY - JOUR AU - Mališić, Vanja AU - Tomić, Nataša AU - Vuksanović, Marija M. AU - Balanc, Bojana AU - Stević, Zoran AU - Marinković, Aleksandar D. AU - Jančić-Heinemann, Radmila AU - Putić, Slaviša PY - 2020 UR - https://vinar.vin.bg.ac.rs/handle/123456789/8923 AB - Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat alumina particles (Al2O3) and alumina doped with iron oxide (Al2O3-Fe) modified with 3-aminopropyl-trimethoxylane (AM) and flax oil fatty acid methyl esters (biodiesel - BD) were used as reinforcement. Thermal conductivity measurements showed that composite with alumina particles with the highest alpha phase content had the highest thermal conductivity values. Mechanical properties (tensile strength, modulus of elasticity and elongation at break) were improved by the addition of modified alumina particles to PMMA/DMI matrix. The thermal properties are the most improved for composite with 3 wt.% Al2O3-Fe-AM particles that had the lowest temperature in a crack zone was noticed (10.28 %) compared to PMMA added due to the better stiffness and highest thermal conductivity. T2 - Science of Sintering T1 - An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles VL - 52 IS - 4 SP - 457 EP - 467 DO - 10.2298/SOS2004457M ER -
@article{ author = "Mališić, Vanja and Tomić, Nataša and Vuksanović, Marija M. and Balanc, Bojana and Stević, Zoran and Marinković, Aleksandar D. and Jančić-Heinemann, Radmila and Putić, Slaviša", year = "2020", abstract = "Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat alumina particles (Al2O3) and alumina doped with iron oxide (Al2O3-Fe) modified with 3-aminopropyl-trimethoxylane (AM) and flax oil fatty acid methyl esters (biodiesel - BD) were used as reinforcement. Thermal conductivity measurements showed that composite with alumina particles with the highest alpha phase content had the highest thermal conductivity values. Mechanical properties (tensile strength, modulus of elasticity and elongation at break) were improved by the addition of modified alumina particles to PMMA/DMI matrix. The thermal properties are the most improved for composite with 3 wt.% Al2O3-Fe-AM particles that had the lowest temperature in a crack zone was noticed (10.28 %) compared to PMMA added due to the better stiffness and highest thermal conductivity.", journal = "Science of Sintering", title = "An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles", volume = "52", number = "4", pages = "457-467", doi = "10.2298/SOS2004457M" }
Mališić, V., Tomić, N., Vuksanović, M. M., Balanc, B., Stević, Z., Marinković, A. D., Jančić-Heinemann, R.,& Putić, S.. (2020). An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles. in Science of Sintering, 52(4), 457-467. https://doi.org/10.2298/SOS2004457M
Mališić V, Tomić N, Vuksanović MM, Balanc B, Stević Z, Marinković AD, Jančić-Heinemann R, Putić S. An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles. in Science of Sintering. 2020;52(4):457-467. doi:10.2298/SOS2004457M .
Mališić, Vanja, Tomić, Nataša, Vuksanović, Marija M., Balanc, Bojana, Stević, Zoran, Marinković, Aleksandar D., Jančić-Heinemann, Radmila, Putić, Slaviša, "An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles" in Science of Sintering, 52, no. 4 (2020):457-467, https://doi.org/10.2298/SOS2004457M . .