Solid targetry at the TESLA Accelerator Installation
No Thumbnail
Authors
Čomor, Jožef J.Dakovic, M
Rajcevic, M
Košutić, Duško D.
Spasic, M
Vidovic, A
Duricic, J
Nedeljković, N.
Article
Metadata
Show full item recordAbstract
According to the concept of the TESLA Accelerator Installation, the channel for production of radioisotopes has to routinely produce Tl-201, In-111, Ga-67, I-123 and F-18, and a number of other radionuclides for experimental purposes. The production of I-123 and F-18 will be performed in dedicated, commercial target stations, while a versatile solid target irradiation system is designed for the routine and experimental production of all other radioisotopes. The solid target station is designed to accept targets for both the 7degrees and 90degrees irradiation geometry. The targets used for the routine production will be prepared by electroplating on a silver substrate. They can be irradiated with a 1.5 kW beam using the 7degrees geometry. The cooling of these targets is enhanced by fins on the back of the silver substrate designed so that the highest temperature on the surface of the target does not exceed 110degreesC. The irradiation procedures will conform to the GMP requirements for ...the production of radio pharmaceuticals. The irradiated targets will be transported directly into the appropriate hot cell for radiochemical processing, All cells will be equipped with a target dissolution unit for etching the irradiated, electroplated film. After decontamination and sufficient cooling down, these targets will be reused several times. (C) 2001 Elsevier Science B.V. All rights reserved.
Keywords:
solid targetry / production of radioisotopes / solid target / target stationSource:
Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, 2002, 480, 1, 7-15Note:
- 20th World Conferenceof the International-Nuclear-Target-Development-Society (INTDS), Oct 02-06, 2000, Antwerp, Belgium
DOI: 10.1016/S0168-9002(01)02040-X
ISSN: 0168-9002
WoS: 000174919300003
Scopus: 2-s2.0-0037060742
Collections
Institution/Community
VinčaTY - JOUR AU - Čomor, Jožef J. AU - Dakovic, M AU - Rajcevic, M AU - Košutić, Duško D. AU - Spasic, M AU - Vidovic, A AU - Duricic, J AU - Nedeljković, N. PY - 2002 UR - https://vinar.vin.bg.ac.rs/handle/123456789/6328 AB - According to the concept of the TESLA Accelerator Installation, the channel for production of radioisotopes has to routinely produce Tl-201, In-111, Ga-67, I-123 and F-18, and a number of other radionuclides for experimental purposes. The production of I-123 and F-18 will be performed in dedicated, commercial target stations, while a versatile solid target irradiation system is designed for the routine and experimental production of all other radioisotopes. The solid target station is designed to accept targets for both the 7degrees and 90degrees irradiation geometry. The targets used for the routine production will be prepared by electroplating on a silver substrate. They can be irradiated with a 1.5 kW beam using the 7degrees geometry. The cooling of these targets is enhanced by fins on the back of the silver substrate designed so that the highest temperature on the surface of the target does not exceed 110degreesC. The irradiation procedures will conform to the GMP requirements for the production of radio pharmaceuticals. The irradiated targets will be transported directly into the appropriate hot cell for radiochemical processing, All cells will be equipped with a target dissolution unit for etching the irradiated, electroplated film. After decontamination and sufficient cooling down, these targets will be reused several times. (C) 2001 Elsevier Science B.V. All rights reserved. T2 - Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment T1 - Solid targetry at the TESLA Accelerator Installation VL - 480 IS - 1 SP - 7 EP - 15 DO - 10.1016/S0168-9002(01)02040-X ER -
@article{ author = "Čomor, Jožef J. and Dakovic, M and Rajcevic, M and Košutić, Duško D. and Spasic, M and Vidovic, A and Duricic, J and Nedeljković, N.", year = "2002", abstract = "According to the concept of the TESLA Accelerator Installation, the channel for production of radioisotopes has to routinely produce Tl-201, In-111, Ga-67, I-123 and F-18, and a number of other radionuclides for experimental purposes. The production of I-123 and F-18 will be performed in dedicated, commercial target stations, while a versatile solid target irradiation system is designed for the routine and experimental production of all other radioisotopes. The solid target station is designed to accept targets for both the 7degrees and 90degrees irradiation geometry. The targets used for the routine production will be prepared by electroplating on a silver substrate. They can be irradiated with a 1.5 kW beam using the 7degrees geometry. The cooling of these targets is enhanced by fins on the back of the silver substrate designed so that the highest temperature on the surface of the target does not exceed 110degreesC. The irradiation procedures will conform to the GMP requirements for the production of radio pharmaceuticals. The irradiated targets will be transported directly into the appropriate hot cell for radiochemical processing, All cells will be equipped with a target dissolution unit for etching the irradiated, electroplated film. After decontamination and sufficient cooling down, these targets will be reused several times. (C) 2001 Elsevier Science B.V. All rights reserved.", journal = "Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment", title = "Solid targetry at the TESLA Accelerator Installation", volume = "480", number = "1", pages = "7-15", doi = "10.1016/S0168-9002(01)02040-X" }
Čomor, J. J., Dakovic, M., Rajcevic, M., Košutić, D. D., Spasic, M., Vidovic, A., Duricic, J.,& Nedeljković, N.. (2002). Solid targetry at the TESLA Accelerator Installation. in Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, 480(1), 7-15. https://doi.org/10.1016/S0168-9002(01)02040-X
Čomor JJ, Dakovic M, Rajcevic M, Košutić DD, Spasic M, Vidovic A, Duricic J, Nedeljković N. Solid targetry at the TESLA Accelerator Installation. in Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. 2002;480(1):7-15. doi:10.1016/S0168-9002(01)02040-X .
Čomor, Jožef J., Dakovic, M, Rajcevic, M, Košutić, Duško D., Spasic, M, Vidovic, A, Duricic, J, Nedeljković, N., "Solid targetry at the TESLA Accelerator Installation" in Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, 480, no. 1 (2002):7-15, https://doi.org/10.1016/S0168-9002(01)02040-X . .