Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition
Нема приказа
Аутори
Eraković, SanjaJanković, Ana
Veljović, Đorđe N.
Palcevskis, Eriks
Mitrić, Miodrag
Stevanović, Tatjana
Janaćković, Đorđe T.
Mišković-Stanković, Vesna B.
Чланак у часопису
Метаподаци
Приказ свих података о документуАпстракт
Hydroxyapatite is the most suitable biocompatible material for bone implant coatings. However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites with various biopolymers. In this study, hydroxyapatite coatings were modified with lignin in order to attain corrosion stability and surface porosity that enables osteogenesis. Incorporating silver, well known for its antimicrobial properties, seemed the best strategy for avoiding possible infections. The silver/hydroxyapatite (Ag/HAP) and silver/hydroxyapatite/lignin (Ag/HAP/Lig) coatings were cathaphoretically deposited on titanium from ethanol suspensions, sintered at 900 degrees C in Ar, and characterized by X-ray diffraction, scanning electron microscopy, field emission scanning electron microscopy, attenuated total reflection Fourier transform infrared, and X-ray photoelectron spectroscopy. The corrosion stability of electrodeposited coatings was evaluated in vitro in Kokubos simulat...ed body fluid (SBF) at 37 degrees C using electrochemical impedance spectroscopy. Bioactivity was estimated by immersion in SBF to evaluate the formation of hydroxyapatite on the coating surface. A microcrystalline structure of newly formed plate-shaped carbonate-hydroxyapatite was detected after only 7 days, indicating enhanced bioactive behavior. Both coatings had good corrosion stability during a prolonged immersion time. Among the two, the Ag/HAP/Lig coating had a homogeneous surface, less roughness, and low values of contact angle.
Извор:
Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 2013, 117, 6, 1633-1643Финансирање / пројекти:
- Reinforcing of Nanotechnology and Functional Materials Centre (EU-245916)
- Синтеза, развој технологија добијања и примена наноструктурних мултифункционалних материјала дефинисаних својстава (RS-45019)
- Магнетни и радионуклидима обележени наноструктурни материјали за примене у медицини (RS-45015)
- National Sciences and Engineering Research Council of Canada (NSERC)
DOI: 10.1021/jp305252a
ISSN: 1520-6106
PubMed: 22991920
WoS: 000315181600018
Scopus: 2-s2.0-84873897120
Колекције
Институција/група
VinčaTY - JOUR AU - Eraković, Sanja AU - Janković, Ana AU - Veljović, Đorđe N. AU - Palcevskis, Eriks AU - Mitrić, Miodrag AU - Stevanović, Tatjana AU - Janaćković, Đorđe T. AU - Mišković-Stanković, Vesna B. PY - 2013 UR - https://vinar.vin.bg.ac.rs/handle/123456789/5321 AB - Hydroxyapatite is the most suitable biocompatible material for bone implant coatings. However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites with various biopolymers. In this study, hydroxyapatite coatings were modified with lignin in order to attain corrosion stability and surface porosity that enables osteogenesis. Incorporating silver, well known for its antimicrobial properties, seemed the best strategy for avoiding possible infections. The silver/hydroxyapatite (Ag/HAP) and silver/hydroxyapatite/lignin (Ag/HAP/Lig) coatings were cathaphoretically deposited on titanium from ethanol suspensions, sintered at 900 degrees C in Ar, and characterized by X-ray diffraction, scanning electron microscopy, field emission scanning electron microscopy, attenuated total reflection Fourier transform infrared, and X-ray photoelectron spectroscopy. The corrosion stability of electrodeposited coatings was evaluated in vitro in Kokubos simulated body fluid (SBF) at 37 degrees C using electrochemical impedance spectroscopy. Bioactivity was estimated by immersion in SBF to evaluate the formation of hydroxyapatite on the coating surface. A microcrystalline structure of newly formed plate-shaped carbonate-hydroxyapatite was detected after only 7 days, indicating enhanced bioactive behavior. Both coatings had good corrosion stability during a prolonged immersion time. Among the two, the Ag/HAP/Lig coating had a homogeneous surface, less roughness, and low values of contact angle. T2 - Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical T1 - Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition VL - 117 IS - 6 SP - 1633 EP - 1643 DO - 10.1021/jp305252a ER -
@article{ author = "Eraković, Sanja and Janković, Ana and Veljović, Đorđe N. and Palcevskis, Eriks and Mitrić, Miodrag and Stevanović, Tatjana and Janaćković, Đorđe T. and Mišković-Stanković, Vesna B.", year = "2013", abstract = "Hydroxyapatite is the most suitable biocompatible material for bone implant coatings. However, its brittleness is a major obstacle, and that is why, recently, research focused on creating composites with various biopolymers. In this study, hydroxyapatite coatings were modified with lignin in order to attain corrosion stability and surface porosity that enables osteogenesis. Incorporating silver, well known for its antimicrobial properties, seemed the best strategy for avoiding possible infections. The silver/hydroxyapatite (Ag/HAP) and silver/hydroxyapatite/lignin (Ag/HAP/Lig) coatings were cathaphoretically deposited on titanium from ethanol suspensions, sintered at 900 degrees C in Ar, and characterized by X-ray diffraction, scanning electron microscopy, field emission scanning electron microscopy, attenuated total reflection Fourier transform infrared, and X-ray photoelectron spectroscopy. The corrosion stability of electrodeposited coatings was evaluated in vitro in Kokubos simulated body fluid (SBF) at 37 degrees C using electrochemical impedance spectroscopy. Bioactivity was estimated by immersion in SBF to evaluate the formation of hydroxyapatite on the coating surface. A microcrystalline structure of newly formed plate-shaped carbonate-hydroxyapatite was detected after only 7 days, indicating enhanced bioactive behavior. Both coatings had good corrosion stability during a prolonged immersion time. Among the two, the Ag/HAP/Lig coating had a homogeneous surface, less roughness, and low values of contact angle.", journal = "Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical", title = "Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition", volume = "117", number = "6", pages = "1633-1643", doi = "10.1021/jp305252a" }
Eraković, S., Janković, A., Veljović, Đ. N., Palcevskis, E., Mitrić, M., Stevanović, T., Janaćković, Đ. T.,& Mišković-Stanković, V. B.. (2013). Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition. in Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 117(6), 1633-1643. https://doi.org/10.1021/jp305252a
Eraković S, Janković A, Veljović ĐN, Palcevskis E, Mitrić M, Stevanović T, Janaćković ĐT, Mišković-Stanković VB. Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition. in Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical. 2013;117(6):1633-1643. doi:10.1021/jp305252a .
Eraković, Sanja, Janković, Ana, Veljović, Đorđe N., Palcevskis, Eriks, Mitrić, Miodrag, Stevanović, Tatjana, Janaćković, Đorđe T., Mišković-Stanković, Vesna B., "Corrosion Stability and Bioactivity in Simulated Body Fluid of Silver/Hydroxyapatite and Silver/Hydroxyapatite/Lignin Coatings on Titanium Obtained by Electrophoretic Deposition" in Journal of Physical Chemistry. Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 117, no. 6 (2013):1633-1643, https://doi.org/10.1021/jp305252a . .