Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
Само за регистроване кориснике
2006
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% NaCl solution using electrochemical impedance spectroscopy (EIS) and thermogravimetric analysis (TGA). Electrochemical deposition of PANI film on mild steel was performed from aqueous solution of 0.5 M sodium benzoate and 0.1 M aniline at constant current density of 1.5 mA cm(-2). Epoxy coatings on mild steel and mild steel with PANI film were deposited at constant voltage. It was shown that during initial time of exposure to 3% NaCl, PANI/epoxy coating system on mild steel has lower values of pore resistance (obtained from EIS), greater amount of absorbed water and lower thermal stability (obtained from TGA) which indicate more porous structure comparing to epoxy coating on mild steel. During prolonged exposure to 3% NaCl, PANI/epoxy coating system exhibited increased... corrosion protection of mild steel comparing to epoxy coating due to the barrier effect of PANI film and the influence of the dissolved molecular oxygen on cathodic and anodic reaction. Differences between corrosion behavior of epoxy coated and PANI/epoxy coated mild steel in acid and neutral solutions has been discussed. (C) 2006 Elsevier B.V. All rights reserved.
Кључне речи:
polyaniline / electropolymerization / epoxy coating / corrosion / thermal characteristicsИзвор:
Progress in Organic Coatings, 2006, 56, 2-3, 214-219Финансирање / пројекти:
- Модификација металних и неметалних материјала електропроводним полимерима за примену у новим технологијама (RS-MESTD-MPN2006-2010-142044)
- Електрохемијске карактеристике оксидних и полимерних превлака на модификованим површинама метала (RS-MESTD-MPN2006-2010-142061)
DOI: 10.1016/j.porgcoat.2006.05.003
ISSN: 0300-9440
WoS: 000239476200018
Scopus: 2-s2.0-33745844359
Колекције
Институција/група
VinčaTY - JOUR AU - Grgur, Branimir N. AU - Gvozdenović, M. AU - Mišković-Stanković, Vesna B. AU - Kačarević-Popović, Zorica M. PY - 2006 UR - https://vinar.vin.bg.ac.rs/handle/123456789/3052 AB - The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% NaCl solution using electrochemical impedance spectroscopy (EIS) and thermogravimetric analysis (TGA). Electrochemical deposition of PANI film on mild steel was performed from aqueous solution of 0.5 M sodium benzoate and 0.1 M aniline at constant current density of 1.5 mA cm(-2). Epoxy coatings on mild steel and mild steel with PANI film were deposited at constant voltage. It was shown that during initial time of exposure to 3% NaCl, PANI/epoxy coating system on mild steel has lower values of pore resistance (obtained from EIS), greater amount of absorbed water and lower thermal stability (obtained from TGA) which indicate more porous structure comparing to epoxy coating on mild steel. During prolonged exposure to 3% NaCl, PANI/epoxy coating system exhibited increased corrosion protection of mild steel comparing to epoxy coating due to the barrier effect of PANI film and the influence of the dissolved molecular oxygen on cathodic and anodic reaction. Differences between corrosion behavior of epoxy coated and PANI/epoxy coated mild steel in acid and neutral solutions has been discussed. (C) 2006 Elsevier B.V. All rights reserved. T2 - Progress in Organic Coatings T1 - Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution VL - 56 IS - 2-3 SP - 214 EP - 219 DO - 10.1016/j.porgcoat.2006.05.003 ER -
@article{ author = "Grgur, Branimir N. and Gvozdenović, M. and Mišković-Stanković, Vesna B. and Kačarević-Popović, Zorica M.", year = "2006", abstract = "The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% NaCl solution using electrochemical impedance spectroscopy (EIS) and thermogravimetric analysis (TGA). Electrochemical deposition of PANI film on mild steel was performed from aqueous solution of 0.5 M sodium benzoate and 0.1 M aniline at constant current density of 1.5 mA cm(-2). Epoxy coatings on mild steel and mild steel with PANI film were deposited at constant voltage. It was shown that during initial time of exposure to 3% NaCl, PANI/epoxy coating system on mild steel has lower values of pore resistance (obtained from EIS), greater amount of absorbed water and lower thermal stability (obtained from TGA) which indicate more porous structure comparing to epoxy coating on mild steel. During prolonged exposure to 3% NaCl, PANI/epoxy coating system exhibited increased corrosion protection of mild steel comparing to epoxy coating due to the barrier effect of PANI film and the influence of the dissolved molecular oxygen on cathodic and anodic reaction. Differences between corrosion behavior of epoxy coated and PANI/epoxy coated mild steel in acid and neutral solutions has been discussed. (C) 2006 Elsevier B.V. All rights reserved.", journal = "Progress in Organic Coatings", title = "Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution", volume = "56", number = "2-3", pages = "214-219", doi = "10.1016/j.porgcoat.2006.05.003" }
Grgur, B. N., Gvozdenović, M., Mišković-Stanković, V. B.,& Kačarević-Popović, Z. M.. (2006). Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution. in Progress in Organic Coatings, 56(2-3), 214-219. https://doi.org/10.1016/j.porgcoat.2006.05.003
Grgur BN, Gvozdenović M, Mišković-Stanković VB, Kačarević-Popović ZM. Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution. in Progress in Organic Coatings. 2006;56(2-3):214-219. doi:10.1016/j.porgcoat.2006.05.003 .
Grgur, Branimir N., Gvozdenović, M., Mišković-Stanković, Vesna B., Kačarević-Popović, Zorica M., "Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution" in Progress in Organic Coatings, 56, no. 2-3 (2006):214-219, https://doi.org/10.1016/j.porgcoat.2006.05.003 . .