Wear of diamond-coated cutting tool inserts upon machining of Al-12% Si and glass fiber/polyester resin composites
2013
Аутори
Grahovac, Nebojša N.Stanković, Srboljub
Zec, Slavica
Maksimović, Vesna
Grahovac, Boris
Milovanović, Dubravka S.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Results of the wear resistance of the diamond-coated cutting tool inserts upon machining Al-12% Si alloy and glass fiber/polyester resin composites are presented in this paper. The aim of this paper was to demonstrate the advantages of application of cutting tool inserts with the diamond coating over the conventional tungsten-carbide (WC) tools, and to obtain the cheaper serial production (shorter machining time) and satisfactory lifetime of the diamond cutting tool inserts. Surface roughness of the machined samples was measured for both as-received and diamond coated inserts. The diamond microstructure of undamaged part of inserts as well as the appearance of microstructure of diamond coated inserts after machining has been investigated. Results of the behavior of two regimes of preparation of diamond-coated inserts were compared and analyzed. Generally, the wear resistance of the diamond-coated cutting tool is superior over the conventional tool.
Кључне речи:
diamond-coated cutting tool insert / machining / wear resistance / microstructureИзвор:
Processing and Application of Ceramics, 2013, 7, 2, 69-72Финансирање / пројекти:
- Синтеза, процесирање и карактеризација наноструктурних материјала за примену у области енергије, механичког инжењерства, заштите животне стредине и биомедицине (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45012)
Колекције
Институција/група
VinčaTY - JOUR AU - Grahovac, Nebojša N. AU - Stanković, Srboljub AU - Zec, Slavica AU - Maksimović, Vesna AU - Grahovac, Boris AU - Milovanović, Dubravka S. PY - 2013 UR - https://vinar.vin.bg.ac.rs/handle/123456789/2743 AB - Results of the wear resistance of the diamond-coated cutting tool inserts upon machining Al-12% Si alloy and glass fiber/polyester resin composites are presented in this paper. The aim of this paper was to demonstrate the advantages of application of cutting tool inserts with the diamond coating over the conventional tungsten-carbide (WC) tools, and to obtain the cheaper serial production (shorter machining time) and satisfactory lifetime of the diamond cutting tool inserts. Surface roughness of the machined samples was measured for both as-received and diamond coated inserts. The diamond microstructure of undamaged part of inserts as well as the appearance of microstructure of diamond coated inserts after machining has been investigated. Results of the behavior of two regimes of preparation of diamond-coated inserts were compared and analyzed. Generally, the wear resistance of the diamond-coated cutting tool is superior over the conventional tool. T2 - Processing and Application of Ceramics T1 - Wear of diamond-coated cutting tool inserts upon machining of Al-12% Si and glass fiber/polyester resin composites VL - 7 IS - 2 SP - 69 EP - 72 DO - 10.2298/PAC1302069G ER -
@article{ author = "Grahovac, Nebojša N. and Stanković, Srboljub and Zec, Slavica and Maksimović, Vesna and Grahovac, Boris and Milovanović, Dubravka S.", year = "2013", abstract = "Results of the wear resistance of the diamond-coated cutting tool inserts upon machining Al-12% Si alloy and glass fiber/polyester resin composites are presented in this paper. The aim of this paper was to demonstrate the advantages of application of cutting tool inserts with the diamond coating over the conventional tungsten-carbide (WC) tools, and to obtain the cheaper serial production (shorter machining time) and satisfactory lifetime of the diamond cutting tool inserts. Surface roughness of the machined samples was measured for both as-received and diamond coated inserts. The diamond microstructure of undamaged part of inserts as well as the appearance of microstructure of diamond coated inserts after machining has been investigated. Results of the behavior of two regimes of preparation of diamond-coated inserts were compared and analyzed. Generally, the wear resistance of the diamond-coated cutting tool is superior over the conventional tool.", journal = "Processing and Application of Ceramics", title = "Wear of diamond-coated cutting tool inserts upon machining of Al-12% Si and glass fiber/polyester resin composites", volume = "7", number = "2", pages = "69-72", doi = "10.2298/PAC1302069G" }
Grahovac, N. N., Stanković, S., Zec, S., Maksimović, V., Grahovac, B.,& Milovanović, D. S.. (2013). Wear of diamond-coated cutting tool inserts upon machining of Al-12% Si and glass fiber/polyester resin composites. in Processing and Application of Ceramics, 7(2), 69-72. https://doi.org/10.2298/PAC1302069G
Grahovac NN, Stanković S, Zec S, Maksimović V, Grahovac B, Milovanović DS. Wear of diamond-coated cutting tool inserts upon machining of Al-12% Si and glass fiber/polyester resin composites. in Processing and Application of Ceramics. 2013;7(2):69-72. doi:10.2298/PAC1302069G .
Grahovac, Nebojša N., Stanković, Srboljub, Zec, Slavica, Maksimović, Vesna, Grahovac, Boris, Milovanović, Dubravka S., "Wear of diamond-coated cutting tool inserts upon machining of Al-12% Si and glass fiber/polyester resin composites" in Processing and Application of Ceramics, 7, no. 2 (2013):69-72, https://doi.org/10.2298/PAC1302069G . .