VinaR - Repository of the Vinča Nuclear Institute
    • English
    • Српски
    • Српски (Serbia)
  • English 
    • English
    • Serbian (Cyrillic)
    • Serbian (Latin)
  • Login
View Item 
  •   Vinar
  • Vinča
  • Radovi istraživača
  • View Item
  •   Vinar
  • Vinča
  • Radovi istraživača
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Vendor‐independent skin dose mapping application for interventional radiology and cardiology

Thumbnail
2021
Main article [PDF] (2.303Mb)
Authors
Krajinović, Marko
Kržanović, Nikola
Ciraj-Bjelac, Olivera
Article (Published version)
,
© 2021 The Author(s)
Metadata
Show full item record
Abstract
Purpose: The purpose of this paper is to present and validate an originally developed application SkinCare used for skin dose mapping in interventional procedures, which are associated with relatively high radiation doses to the patient’s skin and possible skin reactions. Methods: SkinCare is an application tool for generating skin dose maps following interventional radiology and cardiology procedures using the realistic 3D patient models. Skin dose is calculated using data from Digital Imaging and Communications in Medicine (DICOM) Radiation Dose Structured Reports (RDSRs). SkinCare validation was performed by using the data from the Siemens Artis Zee Biplane fluoroscopy system and conducting “Acceptance and quality control protocols for skin dose calculating software solutions in interventional cardiology” developed and tested in the frame of the VERIDIC project. XR-RV3 Gafchromic films were used as dosimeters to compare peak skin doses (PSDs) and dose maps obtained through measureme...nts and calculations. DICOM RDSRs from four fluoroscopy systems of different vendors (Canon, GE, Philips, and Siemens) were used for the development of the SkinCare and for the comparison of skin dose maps generated using SkinCare to skin dose maps generated by different commercial software tools (Dose Tracking System (DTS) from Canon, RadimetricsTM from Bayer and RDM from MEDSQUARE). The same RDSRs generated during a cardiology clinical procedure (percutaneous coronary intervention—PCI) were used for comparison. Results: Validation performed using VERIDIC's protocols for skin dose calculation software showed that PSD calculated by SkinCare is within 17% and 16% accuracy compared to measurements using XR-RV3 Gafchromic films for fundamental irradiation setups and simplified clinical procedures, respectively. Good visual agreement between dose maps generated by SkinCare and DTS, RadimetricsTM and RDM was obtained. Conclusions: SkinCare is proved to be very convenient solution that can be used for monitoring delivered dose following interventional procedures. © 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Keywords:
DICOM RDSR / interventional procedures / skin dose assessment / SkinCare application / software / XR-RV3 GafChromic films
Source:
Journal of Applied Clinical Medical Physics, 2021, 22, 2, 145-157
Funding / projects:
  • Ministry of Education, Science and Technological Development of the Republic of Serbia

DOI: 10.1002/acm2.13167

ISSN: 1526-9914

PubMed: 33440056

WoS: 000607287900001

Scopus: 2-s2.0-85099379583
[ Google Scholar ]
5
3
URI
https://vinar.vin.bg.ac.rs/handle/123456789/9519
Collections
  • Radovi istraživača
  • 100 - Laboratorija za zaštitu od zračenja i zaštitu životne sredine
Institution/Community
Vinča
TY  - JOUR
AU  - Krajinović, Marko
AU  - Kržanović, Nikola
AU  - Ciraj-Bjelac, Olivera
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9519
AB  - Purpose: The purpose of this paper is to present and validate an originally developed application SkinCare used for skin dose mapping in interventional procedures, which are associated with relatively high radiation doses to the patient’s skin and possible skin reactions. Methods: SkinCare is an application tool for generating skin dose maps following interventional radiology and cardiology procedures using the realistic 3D patient models. Skin dose is calculated using data from Digital Imaging and Communications in Medicine (DICOM) Radiation Dose Structured Reports (RDSRs). SkinCare validation was performed by using the data from the Siemens Artis Zee Biplane fluoroscopy system and conducting “Acceptance and quality control protocols for skin dose calculating software solutions in interventional cardiology” developed and tested in the frame of the VERIDIC project. XR-RV3 Gafchromic films were used as dosimeters to compare peak skin doses (PSDs) and dose maps obtained through measurements and calculations. DICOM RDSRs from four fluoroscopy systems of different vendors (Canon, GE, Philips, and Siemens) were used for the development of the SkinCare and for the comparison of skin dose maps generated using SkinCare to skin dose maps generated by different commercial software tools (Dose Tracking System (DTS) from Canon, RadimetricsTM from Bayer and RDM from MEDSQUARE). The same RDSRs generated during a cardiology clinical procedure (percutaneous coronary intervention—PCI) were used for comparison. Results: Validation performed using VERIDIC's protocols for skin dose calculation software showed that PSD calculated by SkinCare is within 17% and 16% accuracy compared to measurements using XR-RV3 Gafchromic films for fundamental irradiation setups and simplified clinical procedures, respectively. Good visual agreement between dose maps generated by SkinCare and DTS, RadimetricsTM and RDM was obtained. Conclusions: SkinCare is proved to be very convenient solution that can be used for monitoring delivered dose following interventional procedures. © 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.
T2  - Journal of Applied Clinical Medical Physics
T1  - Vendor‐independent skin dose mapping application for interventional radiology and cardiology
VL  - 22
IS  - 2
SP  - 145
EP  - 157
DO  - 10.1002/acm2.13167
ER  - 
@article{
author = "Krajinović, Marko and Kržanović, Nikola and Ciraj-Bjelac, Olivera",
year = "2021",
abstract = "Purpose: The purpose of this paper is to present and validate an originally developed application SkinCare used for skin dose mapping in interventional procedures, which are associated with relatively high radiation doses to the patient’s skin and possible skin reactions. Methods: SkinCare is an application tool for generating skin dose maps following interventional radiology and cardiology procedures using the realistic 3D patient models. Skin dose is calculated using data from Digital Imaging and Communications in Medicine (DICOM) Radiation Dose Structured Reports (RDSRs). SkinCare validation was performed by using the data from the Siemens Artis Zee Biplane fluoroscopy system and conducting “Acceptance and quality control protocols for skin dose calculating software solutions in interventional cardiology” developed and tested in the frame of the VERIDIC project. XR-RV3 Gafchromic films were used as dosimeters to compare peak skin doses (PSDs) and dose maps obtained through measurements and calculations. DICOM RDSRs from four fluoroscopy systems of different vendors (Canon, GE, Philips, and Siemens) were used for the development of the SkinCare and for the comparison of skin dose maps generated using SkinCare to skin dose maps generated by different commercial software tools (Dose Tracking System (DTS) from Canon, RadimetricsTM from Bayer and RDM from MEDSQUARE). The same RDSRs generated during a cardiology clinical procedure (percutaneous coronary intervention—PCI) were used for comparison. Results: Validation performed using VERIDIC's protocols for skin dose calculation software showed that PSD calculated by SkinCare is within 17% and 16% accuracy compared to measurements using XR-RV3 Gafchromic films for fundamental irradiation setups and simplified clinical procedures, respectively. Good visual agreement between dose maps generated by SkinCare and DTS, RadimetricsTM and RDM was obtained. Conclusions: SkinCare is proved to be very convenient solution that can be used for monitoring delivered dose following interventional procedures. © 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.",
journal = "Journal of Applied Clinical Medical Physics",
title = "Vendor‐independent skin dose mapping application for interventional radiology and cardiology",
volume = "22",
number = "2",
pages = "145-157",
doi = "10.1002/acm2.13167"
}
Krajinović, M., Kržanović, N.,& Ciraj-Bjelac, O.. (2021). Vendor‐independent skin dose mapping application for interventional radiology and cardiology. in Journal of Applied Clinical Medical Physics, 22(2), 145-157.
https://doi.org/10.1002/acm2.13167
Krajinović M, Kržanović N, Ciraj-Bjelac O. Vendor‐independent skin dose mapping application for interventional radiology and cardiology. in Journal of Applied Clinical Medical Physics. 2021;22(2):145-157.
doi:10.1002/acm2.13167 .
Krajinović, Marko, Kržanović, Nikola, Ciraj-Bjelac, Olivera, "Vendor‐independent skin dose mapping application for interventional radiology and cardiology" in Journal of Applied Clinical Medical Physics, 22, no. 2 (2021):145-157,
https://doi.org/10.1002/acm2.13167 . .

DSpace software copyright © 2002-2015  DuraSpace
About the VinaR Repository | Send Feedback

OpenAIRERCUB
 

 

All of DSpaceCommunitiesAuthorsTitlesSubjectsThis institutionAuthorsTitlesSubjects

Statistics

View Usage Statistics

DSpace software copyright © 2002-2015  DuraSpace
About the VinaR Repository | Send Feedback

OpenAIRERCUB