Претраживање
Приказ резултата 11-20 од 50
Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite
(Science of Sintering, 2022)
Anorthite ceramics was fabricated from calcium exchanged Na-LTA zeolite. The powder compacts of Ca-LTA zeolite were sintered at different temperatures ranging between 1100 and 1400°C. It was found that the temperature of ...
Influence of temperature and different hydroxides on properties of activated carbon prepared from saccharose. Characterization, thermal degradation kinetic and dyes removal from water solutions
(Science of Sintering, 2018)
In presented paper, influence of temperature, precursor concentration and different hydroxides on properties of activated carbon obtained from saccharose were investigated. The samples were prepared by hydrothermal treatment ...
Application of the final flotation waste for obtaining the glass-ceramic materials
(Science of Sintering, 2017)
This work describes the investigation of the final flotation waste (FFW), originating from the RTB Bor Company (Serbia), as the main component for the production of glass-ceramic materials. The glass-ceramics was synthesized ...
Thermally induced phase transformation of Mn-LTA and Mn-FAU zeolite to anorthite phases
(Science of Sintering, 2021)
Data on thermally induced transformations of Mn exchanged zeolites LTA and FAU topology are presented in this paper. Thermally induced phase transformation of Mn-exchange zeolites are followed in the range from 700 to ...
Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
(Science of Sintering, 2020)
The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the ...
Optical properties of zigzag nickel nanostructures obtained at different deposition angles
(Science of Sintering, 2021)
In this study, nickel (Ni) thin films were deposited at two different angles (65o and 85o) using Glancing Angle Deposition technique, to the thicknesses of 60 – 290 nm. Structural analysis of the deposited films was performed ...
The Effect of Thickness and Deposition Angle on Structural, Chemical and Magnetic Properties of Nickel Slanted Columns
(Science of Sintering, 2022)
In this work, the influence of different deposition angles on the structural, chemical and magnetic properties of nickel (Ni) thin films was investigated. Nickel samples were deposited by glancing angle deposition technique ...
Electrospun alumina fibers doped with ferric and magnesium oxides
(Science of Sintering, 2018)
It is well known that alumina possesses good mechanical and chemical properties. Nanofibers having alpha - alumina structure was used as reinforcement for metal, polymer and ceramic matrix composites. In this study, three ...
An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles
(Science of Sintering, 2020)
Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat ...
Basalt-polyester hybrid composite materials for demanding wear applications
(Science of Sintering, 2020)
Basalt as a filler in a polymer-based composite material fulfils the demand of being natural, environment-friendly material for the production of various composite materials. The material could be used as protective layer ...