Претраживање
Приказ резултата 1-10 од 23
Macroporous monoliths based оn natural mineral sources, clay аnd diatomite
(Science of Sintering, 2020)
Macroporous silica ceramic was obtained using clay and diatomite. Boric acid as a low-cost additive in the amount of 1 wt% was used. These porous materials were obtained at low forming pressure (40-80 MPa) and lower sintering ...
Firing Variables and Strain Sensitivity of Bi2Ru2O7 Thick Resistive Films
(Science of Sintering, 2022)
In order to provide accurate and semi-real-time information about performances and conditions of various civil engineering structures thick-film resistors are often being used as strain sensors. For that purpose, Ba2Ru2O7 ...
Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite
(Science of Sintering, 2022)
Anorthite ceramics was fabricated from calcium exchanged Na-LTA zeolite. The powder compacts of Ca-LTA zeolite were sintered at different temperatures ranging between 1100 and 1400°C. It was found that the temperature of ...
Thermally induced phase transformation of Mn-LTA and Mn-FAU zeolite to anorthite phases
(Science of Sintering, 2021)
Data on thermally induced transformations of Mn exchanged zeolites LTA and FAU topology are presented in this paper. Thermally induced phase transformation of Mn-exchange zeolites are followed in the range from 700 to ...
Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
(Science of Sintering, 2020)
The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the ...
Optical properties of zigzag nickel nanostructures obtained at different deposition angles
(Science of Sintering, 2021)
In this study, nickel (Ni) thin films were deposited at two different angles (65o and 85o) using Glancing Angle Deposition technique, to the thicknesses of 60 – 290 nm. Structural analysis of the deposited films was performed ...
The Effect of Thickness and Deposition Angle on Structural, Chemical and Magnetic Properties of Nickel Slanted Columns
(Science of Sintering, 2022)
In this work, the influence of different deposition angles on the structural, chemical and magnetic properties of nickel (Ni) thin films was investigated. Nickel samples were deposited by glancing angle deposition technique ...
An experimental study of mechanical properties and heat transfer of acrylic composites with structural and surface modified Al2O3 particles
(Science of Sintering, 2020)
Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat ...
Basalt-polyester hybrid composite materials for demanding wear applications
(Science of Sintering, 2020)
Basalt as a filler in a polymer-based composite material fulfils the demand of being natural, environment-friendly material for the production of various composite materials. The material could be used as protective layer ...
Antimicrobial effects of carbonaceous material functionalized with silver
(Science of Sintering, 2020)
Carbonaceous materials as well as its form functionalized with metallic silver have been prepared by hydrothermal carbonization of fructose. Results are presented to show that nanostructured silver was obtained through the ...