Претраживање
Приказ резултата 1-10 од 15
Microwave assisted hydrothermal synthesis of (Fe,Co) 3 O 4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism
(Ceramics International, 2018)
Microstructure and magnetic properties of nanoparticles can be tailored by optimising the synthesis procedure and changing chemical composition. In this study, a two-step procedure, i.e., coprecipitation in the presence ...
Niobium and zinc doped titanium-tin-oxide solid-solution ceramics: Synthesis, structure and electrical characterization
(Ceramics International, 2018)
This paper describes the processing, microstructure, optical and electrical properties of the nanocrystalline (NC) niobium and zinc doped titanium-tin-oxide (TTO:NZ) based ceramics. Variety of techniques was employed (X-ray ...
Cyclic oxidation of Ti3Al-based materials
(Ceramics International, 2019)
The microstructure variation and oxidation behavior of a hot-rolled and quenched Ti-24Al-11Nb (at%) intermetallic alloy with and without protective Ni-20Cr (at%) coating were studied in the air at a cyclic annealing ...
Improved coloristic properties and high NIR reflectance of environment-friendly yellow pigments based on bismuth vanadate
(Ceramics International, 2018)
Herein, fine powders of yellow pigments based on BiVO4 were successfully prepared in two crystalline forms, tetragonal zircon-structured and monoclinic scheelite-structured, through a ethylene glycol-assisted method subjected ...
Shape and aspect ratio analysis of anisotropic magnetic nanochains based on TEM micrographs
(Ceramics International, 2018)
Due to advances in electron microscopy and to the development of novel nanoparticle structures with different morphologies and the dependence of physical properties on the nanoparticle morphology, there is a need for a ...
Optimized preparation of alumina based fillers for tuning composite properties
(Ceramics International, 2018)
Alumina based particles were prepared from aluminium chloride hydroxide as starting material by sol-gel technique. One series of particles was doped with ferrous oxide. Both series of particles were calcinated at three ...
Efficient photocatalytic hydrogen production over titanate/titania nanostructures modified with nickel
(Ceramics International, 2019)
Nickel-modified titanate/TiO2 catalysts were prepared by deposition of nickel ions onto hydrothermally prepared titanate supports, followed by hydrogen temperature-programmed reduction. Two different nickel precursors ...
A new endodontic mixture based on calcium aluminate cement obtained by hydrothermal synthesis
(Ceramics International, 2019)
The synthesis of a new endodontic mixture based on calcium aluminate cement is reported. Physico-chemical and mechanical properties of the mixture were investigated before and after various hydration periods. Phase analysis ...
Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
(Ceramics International, 2019)
Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes ...
Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
(Ceramics International, 2019)
Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes ...