Search
Now showing items 1-10 of 12
Salt template zirconia reinforcing particles as possible reinforcement for PMMA matrix composite
(Advanced Composites Letters, 2019)
To obtain flakes like zirconia particles at relatively low temperature, the synthesis method for producing zirconia particles on the surface of salt particles that serve as a template is examined. The produced particles ...
The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer
(Polymer Composites, )
As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based ...
The Effect of Water Concentration in Ethyl Alcohol on the Environmentally Assisted Embrittlement of Austempered Ductile Irons
(Metals, 2021)
Austempered ductile iron (ADI) is an advanced cast iron material that has a broad field of application and, among others, it is used in contact and for conveyance of fluids. However, it is noticed that in contact with some ...
Ab initio investigations of structural, electronic and mechanical properties of aluminum nitride at standard and elevated pressures
(Journal of Physics and Chemistry of Solids, 2018)
Ab initio calculations using hybrid B3LYP functional were performed in order to investigate structural, electronic and mechanical properties of aluminum nitride as function of pressure. Electronic properties of the ...
Denture composite reinforced with short polyethylene terephthalate fibers
(Polymer Composites, )
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair ...
Inorganically modified particles FeAl-LDH@SiO2 as reinforcement in poly (methyl) methacrylate matrix composite
(Royal Society Open ScienceRoyal Society Open Science, )
Silica particles were obtained from rice husk to which layered double hydroxide particles were deposited (weight ratio 1 : 1). Fe2+-Al3+ layered double hydroxides (FeAl-LDH) were synthesized by co-precipitation with ratios ...
Obtaining of reinforced Cu-Ti, Cu-Ti-TiB 2 foils through green compact laser sintering
(Journal of Alloys and Compounds, 2018)
Homogenized Cu-4Ti (wt%) and Cu-4Ti-1.4B (wt%) powders were cold pressed and then sintered by pulsed, millisecond Nd:YAG laser system. Phases present in laser sintered samples were characterized by X-ray diffraction (XRD), ...
Extreme pressure conditions of bas based materials: Detailed study of structural changes, band gap engineering, elastic constants and mechanical properties
(Processing and Application of Ceramics, 2019)
A Density Functional Theory (DFT) study has been performed in order to investigate behaviour of barium sulfide (BaS) at high pressures, and relationship between computed properties, in great detail. Novel predicted and ...
Optimized preparation of alumina based fillers for tuning composite properties
(Ceramics International, 2018)
Alumina based particles were prepared from aluminium chloride hydroxide as starting material by sol-gel technique. One series of particles was doped with ferrous oxide. Both series of particles were calcinated at three ...
Structure prediction, high pressure effect and properties investigation of superhard B6O
(Modelling and Simulation in Materials Science and Engineering, 2020)
Ab initio data mining approach has been used in order to investigate B6O system and discover new possible modifications, besides experimentally known R-3m (α-B6O) structure and theoretically predicted Cmcm (β-B6O) structure. ...