Претраживање
Приказ резултата 1-10 од 15
The Influence of Mechanical Activation on Sintering Process of BaCO3 -SrCO3 -TiO2 System
(2012)
Poster presented at the conference Advanced Ceramics and Application I - Serbian Ceramic Society, Belgrade May 10-11, 2012
Synthesis, characterization and sintering properties of Zr-doped hydroxyapatite
(Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2011)
Improving of material characteristics could be achieved in different ways, but it is always connected with the issue of impairing the other functional properties. Hydroxyapatite bioceramics lacks of insufficient mechanical ...
Full density calcium phosphate bioceramics from nanopowders by sintering
(2010)
Poster presented at the Adriatic School of Nanoscience – ASON-1, Dubrovnik, Croatia, September 19–23, 2010
Sintering of different hydroxyapatite nanopowders
(2010)
Poster presented at the Workshop: Processing of Nanostructured Ceramics, Polymers, and Composites, Faculty of Technology and Metallurgy, University of Belgrade, November 29–30, 2010
Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA
(Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2015)
Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of ...
Structural and Electrical Properties of Barium-Zinc-Titanate Ceramics Sintered at 1300°C
(2010)
Poster presented at the 12th Annual Conference of the Materials Research Society of Serbia - YUCOMAT 2010, Herceg Novi, Montenegro, September 6–10, 2010.
Properties of Magnesium Titanate Ceramic Obtained by Two Stage Sintering
(Belgrade : Serbian Ceramic Society, 2014)
The aim of this paper was investigation of structural and electrical properties of magnesium titanate ceramic obtained mechanochemically and subjected to two stage sintering process. Mixtures of MgO and TiO2 were treated ...
Sintering of cordierite in the presence of MoO3 and crystallization analysis
(Belgrade : Materials Research Society of Serbia, 2014)
Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier ...
Influence of one activated component on the sintering process of three phase system
(Belgrade : Materials Research Society of Serbia, 2013)
According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In ...
Microstructure evolution and sintering kinetics of ZnO
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The aim of this paper was to analyse the sintering kinetics and microstructure evolution of ZnO. Powder was isothermally sintered (15, 30, 60, 90 and 120 minutes) in the temperature range from 800 to 1200oC. The values of ...