Now showing items 1-10 of 21
The Influence of Mechanical Activation on Sintering Process of BaCO3 -SrCO3 -TiO2 System
Poster presented at the conference Advanced Ceramics and Application I - Serbian Ceramic Society, Belgrade May 10-11, 2012
The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...
Properties of Magnesium Titanate Ceramic Obtained by Two Stage Sintering
(Belgrade : Serbian Ceramic Society, 2014)
The aim of this paper was investigation of structural and electrical properties of magnesium titanate ceramic obtained mechanochemically and subjected to two stage sintering process. Mixtures of MgO and TiO2 were treated ...
(Kiev : National Academy of Sciences of Ukraine (NASU); Frantsevych Institute for Problems of Materials Science of NASU; National Technical University of Ukraine "KPI"; Ukrainian Materials Science Society; INTEM LTD, 2010)
Starting mixtures of BaCO3, ZnO and TiO2 powders were mechanically activated in a planetary ball mill for various periods of time. The powders obtained were sintered nonisothermally to temperatures between 1100 and 1300°C ...
Structural and Electrical Properties of Barium-Zinc-Titanate Ceramics Sintered at 1300°C
Poster presented at the 12th Annual Conference of the Materials Research Society of Serbia - YUCOMAT 2010, Herceg Novi, Montenegro, September 6–10, 2010.
Influence of one activated component on the sintering process of three phase system
(Belgrade : Materials Research Society of Serbia, 2013)
According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In ...
Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive
(Belgrade : Materials Research Society of Serbia, 2011)
According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ...
Sintering of cordierite in the presence of MoO3 and crystallization analysis
(Belgrade : Materials Research Society of Serbia, 2014)
Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier ...
Influence of different pore-forming agents on wollastonite microstructures
(Belgrade : Serbian Ceramic Society, 2016)
In this study, highly porous macro- and micro-cellular wollastonite-based ceramics was synthesized. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min ...
Structural and electrical properties of barium-zinc-titanate ceramics sintered at 1300ºc
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The aim of this work was an investigation of structural and electrical properties of sintered barium-zinc-titanate ceramics. Mixtures of BaCO3, ZnO and TiO2 were mechanically activated in a planetary ball mill up to 80 ...