The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
Nema prikaza
Autori
Pavlović, Vera P.Nikolić, Maria Vesna
Spasojević, Vojislav
Blanuša, Jovan
Živković, L.
Stojanovic, BD
Pavlović, Vladimir B.
Ristic, MM
Članak u časopisu
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.
Ključne reči:
BaTiO3 / tribophysical activation / sinteringIzvor:
Materials Science Forum, 2006, 514-516, 1566-1570Napomena:
- 3rd International Materials Symposium/12th Meeting of the Sociedad-Portuguesa-da-Materials (Materials 2005/SPM), Mar 20-23, 2005, Univ Aveiro, Aveiro, Portugal
DOI: 10.4028/www.scientific.net/MSF.514-516.1566
ISSN: 0255-5476
WoS: 000238056400310
[ Google Scholar ]Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Pavlović, Vera P. AU - Nikolić, Maria Vesna AU - Spasojević, Vojislav AU - Blanuša, Jovan AU - Živković, L. AU - Stojanovic, BD AU - Pavlović, Vladimir B. AU - Ristic, MM PY - 2006 UR - https://vinar.vin.bg.ac.rs/handle/123456789/6587 AB - In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis. T2 - Materials Science Forum T1 - The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics VL - 514-516 SP - 1566 EP - 1570 DO - 10.4028/www.scientific.net/MSF.514-516.1566 ER -
@article{ author = "Pavlović, Vera P. and Nikolić, Maria Vesna and Spasojević, Vojislav and Blanuša, Jovan and Živković, L. and Stojanovic, BD and Pavlović, Vladimir B. and Ristic, MM", year = "2006", abstract = "In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.", journal = "Materials Science Forum", title = "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics", volume = "514-516", pages = "1566-1570", doi = "10.4028/www.scientific.net/MSF.514-516.1566" }
Pavlović, V. P., Nikolić, M. V., Spasojević, V., Blanuša, J., Živković, L., Stojanovic, B., Pavlović, V. B.,& Ristic, M.. (2006). The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Materials Science Forum, 514-516, 1566-1570. https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566
Pavlović VP, Nikolić MV, Spasojević V, Blanuša J, Živković L, Stojanovic B, Pavlović VB, Ristic M. The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Materials Science Forum. 2006;514-516:1566-1570. doi:10.4028/www.scientific.net/MSF.514-516.1566 .
Pavlović, Vera P., Nikolić, Maria Vesna, Spasojević, Vojislav, Blanuša, Jovan, Živković, L., Stojanovic, BD, Pavlović, Vladimir B., Ristic, MM, "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics" in Materials Science Forum, 514-516 (2006):1566-1570, https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 . .