Furnace for biomass combustion - Comparison of model with experimental data
Abstract
As one of the most easily accessible renewable energy resources, straw can be burned to provide heat energy. In this paper, results of theoretical and experimental research conducted under the proceedings of mathematical - numerical modeling of turbulent reacting flows has been presented. Two-dimensional turbulent flow model with homogeneous chemical reactions has been developed. The proposed model has been analyzed on the example of adiabatic combustion chamber for combustion of agricultural biomass. Turbulent flow is considered using time averaging Navier-Stokes equations that are closed by k-epsilon turbulence model. Calculations based on the proposed models were conducted using commercial CFD package FLUENT 6.3.26. For the purposes of experimental research, measurements of fluid flow and thermal parameters, such as continuous measurement of temperature in different points in the workspace furnace, air flow, flue gas flow, continual analysis of combustion products as well as setting... heat and material balance, were carried out. Comparative analysis of the results of experiments and calculations indicate satisfactory agreement between the model and experiment. (C) 2012 Elsevier Ltd. All rights reserved.
Keywords:
Biomass / Mathematical modeling / k-epsilon Model / Experimental investigationSource:
International Journal of Heat and Mass Transfer, 2012, 55, 15-16, 4312-4317
DOI: 10.1016/j.ijheatmasstransfer.2012.03.079
ISSN: 0017-9310
WoS: 000305367500044
Scopus: 2-s2.0-84861531393
Collections
Institution/Community
VinčaTY - JOUR AU - Đurović, Dejan R. AU - Nemoda, Stevan AU - Dakić, Dragoljub V. AU - Adžić, Miroljub M. AU - Repić, Branislav PY - 2012 UR - https://vinar.vin.bg.ac.rs/handle/123456789/4888 AB - As one of the most easily accessible renewable energy resources, straw can be burned to provide heat energy. In this paper, results of theoretical and experimental research conducted under the proceedings of mathematical - numerical modeling of turbulent reacting flows has been presented. Two-dimensional turbulent flow model with homogeneous chemical reactions has been developed. The proposed model has been analyzed on the example of adiabatic combustion chamber for combustion of agricultural biomass. Turbulent flow is considered using time averaging Navier-Stokes equations that are closed by k-epsilon turbulence model. Calculations based on the proposed models were conducted using commercial CFD package FLUENT 6.3.26. For the purposes of experimental research, measurements of fluid flow and thermal parameters, such as continuous measurement of temperature in different points in the workspace furnace, air flow, flue gas flow, continual analysis of combustion products as well as setting heat and material balance, were carried out. Comparative analysis of the results of experiments and calculations indicate satisfactory agreement between the model and experiment. (C) 2012 Elsevier Ltd. All rights reserved. T2 - International Journal of Heat and Mass Transfer T1 - Furnace for biomass combustion - Comparison of model with experimental data VL - 55 IS - 15-16 SP - 4312 EP - 4317 DO - 10.1016/j.ijheatmasstransfer.2012.03.079 ER -
@article{ author = "Đurović, Dejan R. and Nemoda, Stevan and Dakić, Dragoljub V. and Adžić, Miroljub M. and Repić, Branislav", year = "2012", abstract = "As one of the most easily accessible renewable energy resources, straw can be burned to provide heat energy. In this paper, results of theoretical and experimental research conducted under the proceedings of mathematical - numerical modeling of turbulent reacting flows has been presented. Two-dimensional turbulent flow model with homogeneous chemical reactions has been developed. The proposed model has been analyzed on the example of adiabatic combustion chamber for combustion of agricultural biomass. Turbulent flow is considered using time averaging Navier-Stokes equations that are closed by k-epsilon turbulence model. Calculations based on the proposed models were conducted using commercial CFD package FLUENT 6.3.26. For the purposes of experimental research, measurements of fluid flow and thermal parameters, such as continuous measurement of temperature in different points in the workspace furnace, air flow, flue gas flow, continual analysis of combustion products as well as setting heat and material balance, were carried out. Comparative analysis of the results of experiments and calculations indicate satisfactory agreement between the model and experiment. (C) 2012 Elsevier Ltd. All rights reserved.", journal = "International Journal of Heat and Mass Transfer", title = "Furnace for biomass combustion - Comparison of model with experimental data", volume = "55", number = "15-16", pages = "4312-4317", doi = "10.1016/j.ijheatmasstransfer.2012.03.079" }
Đurović, D. R., Nemoda, S., Dakić, D. V., Adžić, M. M.,& Repić, B.. (2012). Furnace for biomass combustion - Comparison of model with experimental data. in International Journal of Heat and Mass Transfer, 55(15-16), 4312-4317. https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.079
Đurović DR, Nemoda S, Dakić DV, Adžić MM, Repić B. Furnace for biomass combustion - Comparison of model with experimental data. in International Journal of Heat and Mass Transfer. 2012;55(15-16):4312-4317. doi:10.1016/j.ijheatmasstransfer.2012.03.079 .
Đurović, Dejan R., Nemoda, Stevan, Dakić, Dragoljub V., Adžić, Miroljub M., Repić, Branislav, "Furnace for biomass combustion - Comparison of model with experimental data" in International Journal of Heat and Mass Transfer, 55, no. 15-16 (2012):4312-4317, https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.079 . .