Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy
Апстракт
Compacts of Ti-6Al-4V alloy were produced via the powder metallurgy technique applying the hydride-dehydride process and hot isostatic pressing. The conditions of reversible hydride-dehydride process were controlled by chemical and X-ray diffraction analysis and scanning electron microscopy. Powders were pressed above and below the alpha - GT beta transus temperature. The presence of titanium hydrides and morphology of the microstructure have the direct influence on the tensile properties and fracture toughness of the Ti-6Al-4V alloy, but the effect of microstructure is more pronounced.
Кључне речи:
Ti-Al-4V chips / Hydride dehydride process / Hot isostatic pressing / Microstructure / Mechanical properties / FractographyИзвор:
Powder Metallurgy, 2011, 54, 1, 40-45Финансирање / пројекти:
- Синтеза и особине наноструктурних металних, интерметалних и композитних материјала (RS-MESTD-MPN2006-2010-142027)
DOI: 10.1179/174329009X409606
ISSN: 0032-5899
WoS: 000288942500023
Scopus: 2-s2.0-79951913709
Колекције
Институција/група
VinčaTY - JOUR AU - Božić, Dušan AU - Rajković, Višeslava M. AU - Jovanović, Milan T. AU - Dimčić, Biljana PY - 2011 UR - https://vinar.vin.bg.ac.rs/handle/123456789/4258 AB - Compacts of Ti-6Al-4V alloy were produced via the powder metallurgy technique applying the hydride-dehydride process and hot isostatic pressing. The conditions of reversible hydride-dehydride process were controlled by chemical and X-ray diffraction analysis and scanning electron microscopy. Powders were pressed above and below the alpha - GT beta transus temperature. The presence of titanium hydrides and morphology of the microstructure have the direct influence on the tensile properties and fracture toughness of the Ti-6Al-4V alloy, but the effect of microstructure is more pronounced. T2 - Powder Metallurgy T1 - Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy VL - 54 IS - 1 SP - 40 EP - 45 DO - 10.1179/174329009X409606 ER -
@article{ author = "Božić, Dušan and Rajković, Višeslava M. and Jovanović, Milan T. and Dimčić, Biljana", year = "2011", abstract = "Compacts of Ti-6Al-4V alloy were produced via the powder metallurgy technique applying the hydride-dehydride process and hot isostatic pressing. The conditions of reversible hydride-dehydride process were controlled by chemical and X-ray diffraction analysis and scanning electron microscopy. Powders were pressed above and below the alpha - GT beta transus temperature. The presence of titanium hydrides and morphology of the microstructure have the direct influence on the tensile properties and fracture toughness of the Ti-6Al-4V alloy, but the effect of microstructure is more pronounced.", journal = "Powder Metallurgy", title = "Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy", volume = "54", number = "1", pages = "40-45", doi = "10.1179/174329009X409606" }
Božić, D., Rajković, V. M., Jovanović, M. T.,& Dimčić, B.. (2011). Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy. in Powder Metallurgy, 54(1), 40-45. https://doi.org/10.1179/174329009X409606
Božić D, Rajković VM, Jovanović MT, Dimčić B. Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy. in Powder Metallurgy. 2011;54(1):40-45. doi:10.1179/174329009X409606 .
Božić, Dušan, Rajković, Višeslava M., Jovanović, Milan T., Dimčić, Biljana, "Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy" in Powder Metallurgy, 54, no. 1 (2011):40-45, https://doi.org/10.1179/174329009X409606 . .