Show simple item record

dc.creatorCvijović-Alagić, Ivana
dc.creatorCvijović, Zorica M.
dc.creatorMitrovic, S.
dc.creatorPanic, V.
dc.creatorRakin, Marko P.
dc.date.accessioned2018-03-01T21:35:34Z
dc.date.available2018-03-01T21:35:34Z
dc.date.issued2011
dc.identifier.issn0010-938X (print)
dc.identifier.urihttp://vinar.vin.bg.ac.rs/handle/123456789/4216
dc.description.abstractWear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringers solution. The wear experiments were performed at room temperature with a normal load of 40 N and sliding speeds 0.26. 0.5 and 1.0 m/s. The corrosion behaviour was studied at 37 degrees C using open circuit potential-time measurements and potentiodynamic polarization. It was found that Ti-13Nb-13Zr alloy has a substantially lower wear resistance than Ti-6Al-4V ELI alloy in both microstructural conditions. Surface damage extent increases with sliding speed increase and is always smallest for martensitic Ti-6Al-4V ELI alloy with highest hardness. Both alloys exhibit spontaneous passivity in Ringers solution. Corrosion potential values are similar for all three materials. However, Ti-13Nb-13Zr and martensitic Ti-6Al-4V ELI alloys show improved corrosion resistance comparatively to Ti-6Al-4V ELI alloy with (alpha + beta) microstructure. Martensitic Ti-6Al-4V ELI alloy possesses the best combination of both corrosion and wear resistance, although its corrosion resistance is found to be slightly higher than that of the Ti-13Nb-13Zr alloy. (C) 2010 Elsevier Ltd. All rights reserved.en
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/174004/RS//
dc.rightsrestrictedAccessen
dc.sourceCorrosion Scienceen
dc.subjectTi orthopaedic alloysen
dc.subjectRingers solutionen
dc.subjectMicrostructuresen
dc.subjectWear rateen
dc.subjectCorrosion resistanceen
dc.titleWear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solutionen
dc.typearticleen
dcterms.abstractЦвијовиц, З.; Ракин, М.; Цвијовић-Aлагић Ивана; Митровиц, С.; Паниц, В.;
dc.citation.volume53
dc.citation.issue2
dc.citation.spage796
dc.citation.epage808
dc.identifier.wos000287004700033
dc.identifier.doi10.1016/j.corsci.2010.11.014
dc.citation.rankM21a
dc.identifier.scopus2-s2.0-78650240099


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record