Претраживање
Приказ резултата 11-20 од 101
Phase composition and fracture toughness of Si3N4-ZrO2 with CeO2 additions
(Ceramics International, 1999)
Zirconia toughened Si3N4 was prepared with addition of CeO2 by applying hot pressing technique. Phase composition, densification, fracture toughness and hardness were investigated as a function of hot pressing temperature ...
Synthesis of Si3N4-celsian composite materials
(Ceramics International, 2000)
The synthesis of Si3N4-celsian composite materials was studied in this paper. To obtain celsian, two different types of additives were used. In the first case the appropriate mixture of BaCO3, Al2O3 and SiO2 was added to ...
The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite
(Ceramics International, 2015)
Olivine-type LiFePO4 composite powders with carbon were synthesized by freeze drying and subsequent thermal annealing. The main purpose of the research is to explore how various dicarboxylic acids as carbon sources influence ...
Yb3+, Er3+ doped Y2O3 nanoparticles of different shapes prepared by self-propagating room temperature reaction method
(Ceramics International, 2014)
In this report, a cost- and time-effective method for synthesis of Y2O3:Yb3+, Er3+ nanoparticles that exhibit up-conversion emission under infrared excitation is presented. The synthesis method is based on the self-propagating, ...
Preparation and characterization of clay-based porous ceramics with boric acid as additive
(Ceramics International, 2014)
Intention of this work was to obtain porous silicon dioxide ceramics by using boric acid as an inexpensive additive at low forming pressure and low sintering temperature. Starting raw material, smectite clay from surface ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Ceramics International, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Structure and magnetic properties of Co3O4/SiO2 nanocomposite synthesized using combustion assisted sol-gel method
(Ceramics International, 2016)
This paper reports on novel cobalt oxide nanoparticles (NPs) embedded in an amorphous silica (SiO2) matrix, synthesized using a modified sol-gel method. SEM and TEM images show as-synthesized particles to aggregate in the ...
Re-formation of metastable epsilon-Fe2O3 in post-annealing of Fe2O3/SiO2 nanostructure: Synthesis, computational particle shape analysis in micrographs and magnetic properties
(Ceramics International, 2017)
Several Fe2O3/SiO2 nanostructures were synthesized by the combination of the microemulsion and a sol-gel methods. Based on X-ray powder diffraction (XRD) and magnetic measurements (giant coercivity similar to 2.13 T) we ...
Core-shell superparamagnetic iron oxide nanoparticle (SPION) clusters: TEM micrograph analysis, particle design and shape analysis
(Elsevier, 2016)
For the first time, particle shape analysis of silica coated iron oxide (maghemite/magnetite) nanoparticle clusters (core-shell nanostructures) is discussed using computational methods. We analyzed three samples of core-shell ...
Effect of boric acid on the porosity of clay and diatomite monoliths
(Ceramics International, 2016)
Porous silica ceramics were obtained at low forming pressure (40-80 MPa) and low sintering temperature (850-1300 degrees C) for 4 h in air. Boric acid was used as a low-cost additive, in the amount of 2 wt%. Relatively ...