Претраживање
Приказ резултата 1-7 од 7
Mechanical properties and thermal aging behaviour of polyisoprene/polybutadiene/styrene-butadiene rubber ternary blend reinforced with carbon black
(Composites: Part B: Engineering, 2016)
The goal of this work was to study thermal aging of sulfur cured ternary blends based on polyisoprene (NR), polybutadiene (BR) and styrene butadiene rubber (SBR) (NR/BR/SBR=(25/25/50) reinforced with different loading ...
Nanocomposites based on silica-reinforced ethylene-propylene-diene-monomer/acrylonitrile-butadiene rubber blends
(Composites: Part B: Engineering, 2011)
Rheometric characteristics, curing kinetics, mechanical properties before and after thermal aging and morphology of nanocomposites based on various network precursors (i.e., acrylonitrile-butadiene rubber (NBR), ...
Biocomposite membranes of highly methylated pectin and mesoporous silica SBA-15
(Composites: Part B: Engineering, 2014)
Manufacturing of synthetic composites consumes huge energy and their disposal at the end of the life cycle is very difficult since there is virtually no recycling option. Therefore, biocomposite materials have recently ...
Gamma irradiation aging of NBR/CSM rubber nanocomposites
(Composites: Part B: Engineering, 2012)
The effect of gamma-irradiation on the acrylonitrile butadiene/chlorosulphonated polyethylene rubber blends (NBR/CSM) based nanocomposites containing carbon black (CB) and silica filler (Si) were investigated by TG-DTG and ...
Composites based on carbon black reinforced NBR/EPDM rubber blends
(Composites: Part B: Engineering, 2013)
This paper investigates the effect of carbon black filler (CB) (loading 60-100 phr) on the cure kinetics, mechanical properties, morphology and thermal stability of acrylonitrile-butadiene/ethylene-propylene-diene (NBR/EPDM) ...
Comparative study of radiation effect on rubber-carbon black compounds
(Composites: Part B: Engineering, 2014)
Acrylonitrile butadiene rubber (NBR) and ethylene-propylene diene monomer (EPDM) rubber compounds have been prepared without and with 50 phr contents of high abrasion furnace carbon black (HAF). Cure characteristics, namely, ...
NR/CSM/biogenic silica rubber blend composites
(Composites: Part B: Engineering, 2013)
Biogenic silica (BSi) was added at different ratios to some polymer blends of polyisoprene rubber (NR) and chlorosulphonated polyethylene rubber (CSM) cured by conventional sulfur system. The reinforcing performance of the ...