Behavior of silicon carbide/cordierite composite material after cyclic thermal shock
Само за регистроване кориснике
2009
Аутори
Dimitrijević, Marija M.Pošarac, Milica B.
Majstorović, Jelena
Volkov-Husović, Tatjana
Matović, Branko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In the present work Mg-exchanged zeolite and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70. Samples were exposed to the water quench test from 950 degrees C, applying various number of thermal cycles (shocks). Level of surface deterioration before and during quenching was monitored by image analysis. Ultrasonic measurements were used as non-destructive quantification of thermal shock damage in refractory specimens. When refractory samples are subjected to the rapid temperature changes crack nucleation and propagation occurs resulting in loss of strength and materials degradation. The formation of cracks decreases the density and elastic properties of material. Therefore by measuring these properties one can directly monitor the development of thermal shock damage level. Dynamic Youngs modulus of elasticity and strength degradation were calculated using measured values. Level of degradation of the samples was moni...tored before and during testing using Image Pro Plus program for image analysis. The capability of non-destructive test methods such as: ultrasonic velocity technique and image analysis for simple, and reliable non-destructive characterization are presented.
Кључне речи:
Thermal shock resistance / Cordierite/SiC composite ceramics / Refractories / Ultrasonic velocity / Image analysisИзвор:
Ceramics International, 2009, 35, 3, 1077-1081Финансирање / пројекти:
- Ministry of Science and Environment of Serbia [MXT.6717]
- Наноструктурни неоксидни керамички и карбонски материјали и њихови композити (RS-MESTD-MPN2006-2010-142016)
- Истраживање савремених бетонских композита на бази домаћих сировина, са посебним освртом на могућности примене бетона са рециклираним агрегатом у бетонским конструкцијама (RS-MESTD-MPN2006-2010-16004)
DOI: 10.1016/j.ceramint.2008.04.029
ISSN: 0272-8842; 1873-3956
WoS: 000264016300026
Scopus: 2-s2.0-59449090356
Колекције
Институција/група
VinčaTY - JOUR AU - Dimitrijević, Marija M. AU - Pošarac, Milica B. AU - Majstorović, Jelena AU - Volkov-Husović, Tatjana AU - Matović, Branko PY - 2009 UR - https://vinar.vin.bg.ac.rs/handle/123456789/3647 AB - In the present work Mg-exchanged zeolite and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70. Samples were exposed to the water quench test from 950 degrees C, applying various number of thermal cycles (shocks). Level of surface deterioration before and during quenching was monitored by image analysis. Ultrasonic measurements were used as non-destructive quantification of thermal shock damage in refractory specimens. When refractory samples are subjected to the rapid temperature changes crack nucleation and propagation occurs resulting in loss of strength and materials degradation. The formation of cracks decreases the density and elastic properties of material. Therefore by measuring these properties one can directly monitor the development of thermal shock damage level. Dynamic Youngs modulus of elasticity and strength degradation were calculated using measured values. Level of degradation of the samples was monitored before and during testing using Image Pro Plus program for image analysis. The capability of non-destructive test methods such as: ultrasonic velocity technique and image analysis for simple, and reliable non-destructive characterization are presented. T2 - Ceramics International T1 - Behavior of silicon carbide/cordierite composite material after cyclic thermal shock VL - 35 IS - 3 SP - 1077 EP - 1081 DO - 10.1016/j.ceramint.2008.04.029 ER -
@article{ author = "Dimitrijević, Marija M. and Pošarac, Milica B. and Majstorović, Jelena and Volkov-Husović, Tatjana and Matović, Branko", year = "2009", abstract = "In the present work Mg-exchanged zeolite and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70. Samples were exposed to the water quench test from 950 degrees C, applying various number of thermal cycles (shocks). Level of surface deterioration before and during quenching was monitored by image analysis. Ultrasonic measurements were used as non-destructive quantification of thermal shock damage in refractory specimens. When refractory samples are subjected to the rapid temperature changes crack nucleation and propagation occurs resulting in loss of strength and materials degradation. The formation of cracks decreases the density and elastic properties of material. Therefore by measuring these properties one can directly monitor the development of thermal shock damage level. Dynamic Youngs modulus of elasticity and strength degradation were calculated using measured values. Level of degradation of the samples was monitored before and during testing using Image Pro Plus program for image analysis. The capability of non-destructive test methods such as: ultrasonic velocity technique and image analysis for simple, and reliable non-destructive characterization are presented.", journal = "Ceramics International", title = "Behavior of silicon carbide/cordierite composite material after cyclic thermal shock", volume = "35", number = "3", pages = "1077-1081", doi = "10.1016/j.ceramint.2008.04.029" }
Dimitrijević, M. M., Pošarac, M. B., Majstorović, J., Volkov-Husović, T.,& Matović, B.. (2009). Behavior of silicon carbide/cordierite composite material after cyclic thermal shock. in Ceramics International, 35(3), 1077-1081. https://doi.org/10.1016/j.ceramint.2008.04.029
Dimitrijević MM, Pošarac MB, Majstorović J, Volkov-Husović T, Matović B. Behavior of silicon carbide/cordierite composite material after cyclic thermal shock. in Ceramics International. 2009;35(3):1077-1081. doi:10.1016/j.ceramint.2008.04.029 .
Dimitrijević, Marija M., Pošarac, Milica B., Majstorović, Jelena, Volkov-Husović, Tatjana, Matović, Branko, "Behavior of silicon carbide/cordierite composite material after cyclic thermal shock" in Ceramics International, 35, no. 3 (2009):1077-1081, https://doi.org/10.1016/j.ceramint.2008.04.029 . .