Show simple item record

dc.creatorVencl, Aleksandar
dc.creatorBobić, Ilija
dc.creatorMiskovic, Z.
dc.date.accessioned2018-03-01T20:07:41Z
dc.date.available2018-03-01T20:07:41Z
dc.date.issued2008
dc.identifier.issn0043-1648 (print)
dc.identifier.urihttp://vinar.vin.bg.ac.rs/handle/123456789/3236
dc.description.abstractThis paper presents results of structural, mechanical and tribological tests of thixocast hypoeutectic Al-Si alloy A356 (EN AlSi7Mg0.3). The pin-on-disc tribometer was used to carry out tribological tests under dry sliding conditions at different loads. Two sets of specimens were used as pin materials. The first one was taken from the original alloy billet and the second one from thixocast alloy. Heat treatment was applied on both sets of specimens. The results showed that, for all applied loads, heat treatment improved tribological properties, while improvements caused by additional thixocasting were not systematic, i.e. lower friction coefficient was noticed just for lower specific loads. Overall better wear resistance of thixocast materials, compared to the originally alloy, was attributed mainly to their higher silicon content. (c) 2007 Elsevier B.V. All rights reserved.en
dc.rightsrestrictedAccessen
dc.sourceWearen
dc.subjectAl-Si alloyen
dc.subjectthixocastingen
dc.subjectheat treatmenten
dc.subjectdry slidingen
dc.subjectfrictionen
dc.subjectwearen
dc.titleEffect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al-Si alloyen
dc.typearticleen
dcterms.abstractМисковиц, З.; Венцл, A.; Бобић Илија;
dc.citation.volume264
dc.citation.issue7-8
dc.citation.spage616
dc.citation.epage623
dc.identifier.wos000254162000017
dc.identifier.doi10.1016/j.wear.2007.05.011
dc.citation.rankM21
dc.identifier.scopus2-s2.0-38849096546


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record