Show simple item record

dc.creatorJovalekiv, C
dc.creatorStojanovic, B
dc.creatorZdujic, M
dc.creatorMitrić, Miodrag
dc.identifier.issn0957-4522 (print)
dc.description.abstractA powder mixture of alpha-Bi2O3 and ZrO2, both monoclinic, in the molar ratio 2:3, was mechanochemically treated in a planetary ball mill in an air atmosphere for up to 20 h, using steel vial and hardened-steel balls as the milling medium. Mechanochemical reaction leads to the gradual formation of an amorphous phase. After 5 h of milling the starting alpha-Bi2O3 and ZrO2 were transformed fully into a non-crystalline phase. After milling for various times the powders were compacted by pressing and isothermal sintering. The pressed and sintered densities depended on the milling time. Depending on the duration of the mechanochemical treatment and sintering temperature, the phases: gamma-Bi-12(ZrxFe1-x)O-20; Bi(ZrxFe1-x)O-3 and Bi-2(ZrxFe1-x)(4)O-9 were obtained by reactive sintering, whereby the Fe originates from vial and ball debris. The dielectric permittivity of the sintered samples significantly depends on the milling time. Samples milled for 10 and 15 h and subsequently sintered at 800degreesC for 24 h exhibit a hysteresis dependence of the dielectric shift (in altering electric fields higher than 10 kV/cm at room temperature), confirming that the synthesized materials possess ferroelectric properties. (C) 2004 Kluwer Academic Publishers.en
dc.sourceJournal of Materials Science: Materials in Electronicsen
dc.titleThe influence of mechanochemical treatment of the Bi2O3-ZrO2 system on the structural and dielectric properties of the sintered ceramicsen
dcterms.abstractСтојановиц, Б; Митриц, М; Јовалекив, Ц; Здујиц, М;

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record