Magnetite nanoparticles: Synthesis, thin film properties and inkjet printing of magnetic cores for inductor applications
Nema prikaza
Autori
Marjanović, NenadChiolerio, Alessandro
Kus, Mahmut
Ozel, Faruk
Tilki, Serhad
Ivanović, Nenad
Rakočević, Zlatko Lj.
Andrić, Velibor
Barudžija, Tanja
Baumann, Reinhard R.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Magnetic thin films of preferred thickness, patterns, and characteristics were produced using digital printing at room temperature and under ambient conditions to realize magnetic cores for Radio Frequency Identification resonators. The magnetite nanoparticles (Fe3O4) covered with oleic acid were synthesized for that purpose and inkjet printed from chlorobenzene solution on flexible polyimide (PI) substrate and on paper. The obtained nanoparticles have a homogenous morphology, approximately round shape and a size distribution of 7-10 nm. The crystallite size in the films remains the same as in the powder, although aggregation takes place to various extents in the films providing different magnetic properties in each of them. The inkjet printed magnetic cores were investigated in the frequency range from 10 kHz to 11 MHz. Only the magnetic cores printed on PI and annealed at 300 degrees C for 1 h and 2 h exhibit ferromagnetism (mu(r) GT 1) at low frequencies, and at higher frequencies a...ll films saturate to mu(r) LT 1. For the 300 degrees C-2 h annealed films the mu(r) saturation value is distinctly lower than for other films. mu(r) of the core realized on paper is lower than unity in the entire investigated range of frequencies and very uniform, especially at high frequencies. The presented results put forward the possibility of exploitation of the inkjet printed thin magnetic films in well-established manufacturing industries, such as the watch making, banknote watermarking, and the smart tag production. (C) 2014 Elsevier B.V. All rights reserved.
Ključne reči:
Magnetite nanoparticles / Magnetic inks / Thin magnetic films / Magnetic coresIzvor:
Thin Solid Films, 2014, 570, 38-44Finansiranje / projekti:
- Optoelektronski nanodimenzioni sistemi - put ka primeni (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45003)
- Selcuk University BAP Council, TUBITAK [PN: 109T881]
DOI: 10.1016/j.tsf.2014.09.002
ISSN: 0040-6090
WoS: 000345230700007
Scopus: 2-s2.0-84913587322
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Marjanović, Nenad AU - Chiolerio, Alessandro AU - Kus, Mahmut AU - Ozel, Faruk AU - Tilki, Serhad AU - Ivanović, Nenad AU - Rakočević, Zlatko Lj. AU - Andrić, Velibor AU - Barudžija, Tanja AU - Baumann, Reinhard R. PY - 2014 UR - https://vinar.vin.bg.ac.rs/handle/123456789/223 AB - Magnetic thin films of preferred thickness, patterns, and characteristics were produced using digital printing at room temperature and under ambient conditions to realize magnetic cores for Radio Frequency Identification resonators. The magnetite nanoparticles (Fe3O4) covered with oleic acid were synthesized for that purpose and inkjet printed from chlorobenzene solution on flexible polyimide (PI) substrate and on paper. The obtained nanoparticles have a homogenous morphology, approximately round shape and a size distribution of 7-10 nm. The crystallite size in the films remains the same as in the powder, although aggregation takes place to various extents in the films providing different magnetic properties in each of them. The inkjet printed magnetic cores were investigated in the frequency range from 10 kHz to 11 MHz. Only the magnetic cores printed on PI and annealed at 300 degrees C for 1 h and 2 h exhibit ferromagnetism (mu(r) GT 1) at low frequencies, and at higher frequencies all films saturate to mu(r) LT 1. For the 300 degrees C-2 h annealed films the mu(r) saturation value is distinctly lower than for other films. mu(r) of the core realized on paper is lower than unity in the entire investigated range of frequencies and very uniform, especially at high frequencies. The presented results put forward the possibility of exploitation of the inkjet printed thin magnetic films in well-established manufacturing industries, such as the watch making, banknote watermarking, and the smart tag production. (C) 2014 Elsevier B.V. All rights reserved. T2 - Thin Solid Films T1 - Magnetite nanoparticles: Synthesis, thin film properties and inkjet printing of magnetic cores for inductor applications VL - 570 SP - 38 EP - 44 DO - 10.1016/j.tsf.2014.09.002 ER -
@article{ author = "Marjanović, Nenad and Chiolerio, Alessandro and Kus, Mahmut and Ozel, Faruk and Tilki, Serhad and Ivanović, Nenad and Rakočević, Zlatko Lj. and Andrić, Velibor and Barudžija, Tanja and Baumann, Reinhard R.", year = "2014", abstract = "Magnetic thin films of preferred thickness, patterns, and characteristics were produced using digital printing at room temperature and under ambient conditions to realize magnetic cores for Radio Frequency Identification resonators. The magnetite nanoparticles (Fe3O4) covered with oleic acid were synthesized for that purpose and inkjet printed from chlorobenzene solution on flexible polyimide (PI) substrate and on paper. The obtained nanoparticles have a homogenous morphology, approximately round shape and a size distribution of 7-10 nm. The crystallite size in the films remains the same as in the powder, although aggregation takes place to various extents in the films providing different magnetic properties in each of them. The inkjet printed magnetic cores were investigated in the frequency range from 10 kHz to 11 MHz. Only the magnetic cores printed on PI and annealed at 300 degrees C for 1 h and 2 h exhibit ferromagnetism (mu(r) GT 1) at low frequencies, and at higher frequencies all films saturate to mu(r) LT 1. For the 300 degrees C-2 h annealed films the mu(r) saturation value is distinctly lower than for other films. mu(r) of the core realized on paper is lower than unity in the entire investigated range of frequencies and very uniform, especially at high frequencies. The presented results put forward the possibility of exploitation of the inkjet printed thin magnetic films in well-established manufacturing industries, such as the watch making, banknote watermarking, and the smart tag production. (C) 2014 Elsevier B.V. All rights reserved.", journal = "Thin Solid Films", title = "Magnetite nanoparticles: Synthesis, thin film properties and inkjet printing of magnetic cores for inductor applications", volume = "570", pages = "38-44", doi = "10.1016/j.tsf.2014.09.002" }
Marjanović, N., Chiolerio, A., Kus, M., Ozel, F., Tilki, S., Ivanović, N., Rakočević, Z. Lj., Andrić, V., Barudžija, T.,& Baumann, R. R.. (2014). Magnetite nanoparticles: Synthesis, thin film properties and inkjet printing of magnetic cores for inductor applications. in Thin Solid Films, 570, 38-44. https://doi.org/10.1016/j.tsf.2014.09.002
Marjanović N, Chiolerio A, Kus M, Ozel F, Tilki S, Ivanović N, Rakočević ZL, Andrić V, Barudžija T, Baumann RR. Magnetite nanoparticles: Synthesis, thin film properties and inkjet printing of magnetic cores for inductor applications. in Thin Solid Films. 2014;570:38-44. doi:10.1016/j.tsf.2014.09.002 .
Marjanović, Nenad, Chiolerio, Alessandro, Kus, Mahmut, Ozel, Faruk, Tilki, Serhad, Ivanović, Nenad, Rakočević, Zlatko Lj., Andrić, Velibor, Barudžija, Tanja, Baumann, Reinhard R., "Magnetite nanoparticles: Synthesis, thin film properties and inkjet printing of magnetic cores for inductor applications" in Thin Solid Films, 570 (2014):38-44, https://doi.org/10.1016/j.tsf.2014.09.002 . .