Organically modified montmorillonite as an environmental adsorbent of pollutants: Formaldehyde from urea-formaldehyde resin and Acid Red 183 dye from the aqueous solution
Authorized Users Only
2024
Authors
Ristić, MirjanaSamaržija-Jovanović, Suzana
Jovanović, Tijana
Jovanović, Vojislav
Kostić, Marija
Marković, Gordana
Marinović-Cincović, Milena
Article (Published version)
Metadata
Show full item recordAbstract
In this research, a composite based on montmorillonite (K10) modified with HDTMABr was used. The characterization of the pure K10, NaMMT and OMMT was performed using XRD, FTIR-ATR, SEM, TG, DTG, and DTA. Ion exchange capacity (CEC) and specific surface area (SSA) were also determined. The sulfite method was used to determine free and liberated formaldehyde (FA) from synthesized urea-formaldehyde/montmorillonite (UF/ MMT) composites. This research aims to demonstrate the bifunctionality of OMMT and that it can be used both for the capture of FA from the synthesized cross-linked UF resin and for the adsorption of the anionic dye Acid Red 183 (AR183) from aquatic medium. SEM analysis showed that there are changes in the morphology of the OMMT and the formation of a hollow network, which affects the absorption capacity of the clay. The calculated values of free and liberated FA in the UF/OMMT composites are drastically reduced and amount to 0.12% and 0.96%, respectively, compared to the co...mposites with K10 (0.6% and 2.04%, respectively). Also, very promising results were obtained of the adsorption of AR183 dyes from the aquatic medium using OMMT. The results show that OMMT (0.5 g OMMT/50 cm3 aqueous dye solution, c=20 mgdm− 3 ) managed to remove 85.95% of AR183 dye (pH dye=7). The adsorption mechanism of AR183 on OMMT follows the Freundlich isotherm and proceeds according to the pseudo-first-order kinetic model. Overall, the findings of this work indicate that the use of the obtained OMMT has great potential in removing pollutants from two totally different systems.
Keywords:
Montmorillonite / Adsorption / Formaldehyde / Kinetics / Acid Red 183 / Urea-formaldehyde resinSource:
Journal of Environmental Chemical Engineering, 2024, 12, 1, 111828-Funding / projects:
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča) (RS-MESTD-inst-2020-200017)
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200123 (University of Priština - Kosovska Mitrovica, Faculty of Natural Sciences and Mathematics) (RS-MESTD-inst-2020-200123)
- Faculty of Sciences and Mathematics, University of Priština in Kosovska Mitrovica, Serbia [contract number IJ-2301]
Collections
Institution/Community
VinčaTY - JOUR AU - Ristić, Mirjana AU - Samaržija-Jovanović, Suzana AU - Jovanović, Tijana AU - Jovanović, Vojislav AU - Kostić, Marija AU - Marković, Gordana AU - Marinović-Cincović, Milena PY - 2024 UR - https://vinar.vin.bg.ac.rs/handle/123456789/12482 AB - In this research, a composite based on montmorillonite (K10) modified with HDTMABr was used. The characterization of the pure K10, NaMMT and OMMT was performed using XRD, FTIR-ATR, SEM, TG, DTG, and DTA. Ion exchange capacity (CEC) and specific surface area (SSA) were also determined. The sulfite method was used to determine free and liberated formaldehyde (FA) from synthesized urea-formaldehyde/montmorillonite (UF/ MMT) composites. This research aims to demonstrate the bifunctionality of OMMT and that it can be used both for the capture of FA from the synthesized cross-linked UF resin and for the adsorption of the anionic dye Acid Red 183 (AR183) from aquatic medium. SEM analysis showed that there are changes in the morphology of the OMMT and the formation of a hollow network, which affects the absorption capacity of the clay. The calculated values of free and liberated FA in the UF/OMMT composites are drastically reduced and amount to 0.12% and 0.96%, respectively, compared to the composites with K10 (0.6% and 2.04%, respectively). Also, very promising results were obtained of the adsorption of AR183 dyes from the aquatic medium using OMMT. The results show that OMMT (0.5 g OMMT/50 cm3 aqueous dye solution, c=20 mgdm− 3 ) managed to remove 85.95% of AR183 dye (pH dye=7). The adsorption mechanism of AR183 on OMMT follows the Freundlich isotherm and proceeds according to the pseudo-first-order kinetic model. Overall, the findings of this work indicate that the use of the obtained OMMT has great potential in removing pollutants from two totally different systems. T2 - Journal of Environmental Chemical Engineering T1 - Organically modified montmorillonite as an environmental adsorbent of pollutants: Formaldehyde from urea-formaldehyde resin and Acid Red 183 dye from the aqueous solution VL - 12 IS - 1 SP - 111828 DO - 10.1016/j.jece.2023.111828 ER -
@article{ author = "Ristić, Mirjana and Samaržija-Jovanović, Suzana and Jovanović, Tijana and Jovanović, Vojislav and Kostić, Marija and Marković, Gordana and Marinović-Cincović, Milena", year = "2024", abstract = "In this research, a composite based on montmorillonite (K10) modified with HDTMABr was used. The characterization of the pure K10, NaMMT and OMMT was performed using XRD, FTIR-ATR, SEM, TG, DTG, and DTA. Ion exchange capacity (CEC) and specific surface area (SSA) were also determined. The sulfite method was used to determine free and liberated formaldehyde (FA) from synthesized urea-formaldehyde/montmorillonite (UF/ MMT) composites. This research aims to demonstrate the bifunctionality of OMMT and that it can be used both for the capture of FA from the synthesized cross-linked UF resin and for the adsorption of the anionic dye Acid Red 183 (AR183) from aquatic medium. SEM analysis showed that there are changes in the morphology of the OMMT and the formation of a hollow network, which affects the absorption capacity of the clay. The calculated values of free and liberated FA in the UF/OMMT composites are drastically reduced and amount to 0.12% and 0.96%, respectively, compared to the composites with K10 (0.6% and 2.04%, respectively). Also, very promising results were obtained of the adsorption of AR183 dyes from the aquatic medium using OMMT. The results show that OMMT (0.5 g OMMT/50 cm3 aqueous dye solution, c=20 mgdm− 3 ) managed to remove 85.95% of AR183 dye (pH dye=7). The adsorption mechanism of AR183 on OMMT follows the Freundlich isotherm and proceeds according to the pseudo-first-order kinetic model. Overall, the findings of this work indicate that the use of the obtained OMMT has great potential in removing pollutants from two totally different systems.", journal = "Journal of Environmental Chemical Engineering", title = "Organically modified montmorillonite as an environmental adsorbent of pollutants: Formaldehyde from urea-formaldehyde resin and Acid Red 183 dye from the aqueous solution", volume = "12", number = "1", pages = "111828", doi = "10.1016/j.jece.2023.111828" }
Ristić, M., Samaržija-Jovanović, S., Jovanović, T., Jovanović, V., Kostić, M., Marković, G.,& Marinović-Cincović, M.. (2024). Organically modified montmorillonite as an environmental adsorbent of pollutants: Formaldehyde from urea-formaldehyde resin and Acid Red 183 dye from the aqueous solution. in Journal of Environmental Chemical Engineering, 12(1), 111828. https://doi.org/10.1016/j.jece.2023.111828
Ristić M, Samaržija-Jovanović S, Jovanović T, Jovanović V, Kostić M, Marković G, Marinović-Cincović M. Organically modified montmorillonite as an environmental adsorbent of pollutants: Formaldehyde from urea-formaldehyde resin and Acid Red 183 dye from the aqueous solution. in Journal of Environmental Chemical Engineering. 2024;12(1):111828. doi:10.1016/j.jece.2023.111828 .
Ristić, Mirjana, Samaržija-Jovanović, Suzana, Jovanović, Tijana, Jovanović, Vojislav, Kostić, Marija, Marković, Gordana, Marinović-Cincović, Milena, "Organically modified montmorillonite as an environmental adsorbent of pollutants: Formaldehyde from urea-formaldehyde resin and Acid Red 183 dye from the aqueous solution" in Journal of Environmental Chemical Engineering, 12, no. 1 (2024):111828, https://doi.org/10.1016/j.jece.2023.111828 . .