Formation of microstructures and oxides on structural steel by nanosecond laser irradiation
Нема приказа
Аутори
Chumakov, A. N.Nikonchuk, Irina S.
Gaković, Biljana M.
![](/themes/MirageVinar/images/orcid.png)
Petrović, Suzana
![](/themes/MirageVinar/images/orcid.png)
Mitrić, Miodrag
![](/themes/MirageVinar/images/orcid.png)
Lupulescu, C.
Чланак у часопису (Објављена верзија)
![](/themes/MirageVinar//images/creativecommons/arr.png)
Метаподаци
Приказ свих података о документуАпстракт
Results of laser-induced oxidation (100−500 Hz frequency, 1064 nm wavelength, and 1 ns pulse duration) and formation of micro- and nanostructures on the surface of high-quality structural carbon steel (0.42 wt.% C, 0.5 wt.% Mn, 0.25 wt.% Cr) are presented. The steel samples were irradiated in ambient air, water, 3% hydrogen peroxide, and ethanol by a series of laser pulses at a power density of (3.2−4.4)·109 W/cm2, which is close to the ablation threshold. The surface structures were examined by optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Raman spectroscopy. Different kinds of structures detected on the steel surface and the efficiency of oxide formation depend strongly on both the liquid or gaseous environments and the parameters of laser treatment. It was found that the efficiency of nano/microstructures and oxides formation on structural steel is especially expressed for samples irradiated in air and hydrogen peroxid...e environments.
Кључне речи:
structural carbon steel / nanosecond laser irradiation / oxide formation / laser-induced surface structureИзвор:
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 2014, 18, 3
DOI: 10.1615/hightempmatproc.2015015600
ISSN: 1093-3611, 1940-4360
Scopus: 2-s2.0-84955267550
Институција/група
VinčaTY - JOUR AU - Chumakov, A. N. AU - Nikonchuk, Irina S. AU - Gaković, Biljana M. AU - Petrović, Suzana AU - Mitrić, Miodrag AU - Lupulescu, C. PY - 2014 UR - https://vinar.vin.bg.ac.rs/handle/123456789/10958 AB - Results of laser-induced oxidation (100−500 Hz frequency, 1064 nm wavelength, and 1 ns pulse duration) and formation of micro- and nanostructures on the surface of high-quality structural carbon steel (0.42 wt.% C, 0.5 wt.% Mn, 0.25 wt.% Cr) are presented. The steel samples were irradiated in ambient air, water, 3% hydrogen peroxide, and ethanol by a series of laser pulses at a power density of (3.2−4.4)·109 W/cm2, which is close to the ablation threshold. The surface structures were examined by optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Raman spectroscopy. Different kinds of structures detected on the steel surface and the efficiency of oxide formation depend strongly on both the liquid or gaseous environments and the parameters of laser treatment. It was found that the efficiency of nano/microstructures and oxides formation on structural steel is especially expressed for samples irradiated in air and hydrogen peroxide environments. T2 - High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes T1 - Formation of microstructures and oxides on structural steel by nanosecond laser irradiation VL - 18 IS - 3 DO - 10.1615/hightempmatproc.2015015600 ER -
@article{ author = "Chumakov, A. N. and Nikonchuk, Irina S. and Gaković, Biljana M. and Petrović, Suzana and Mitrić, Miodrag and Lupulescu, C.", year = "2014", abstract = "Results of laser-induced oxidation (100−500 Hz frequency, 1064 nm wavelength, and 1 ns pulse duration) and formation of micro- and nanostructures on the surface of high-quality structural carbon steel (0.42 wt.% C, 0.5 wt.% Mn, 0.25 wt.% Cr) are presented. The steel samples were irradiated in ambient air, water, 3% hydrogen peroxide, and ethanol by a series of laser pulses at a power density of (3.2−4.4)·109 W/cm2, which is close to the ablation threshold. The surface structures were examined by optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Raman spectroscopy. Different kinds of structures detected on the steel surface and the efficiency of oxide formation depend strongly on both the liquid or gaseous environments and the parameters of laser treatment. It was found that the efficiency of nano/microstructures and oxides formation on structural steel is especially expressed for samples irradiated in air and hydrogen peroxide environments.", journal = "High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes", title = "Formation of microstructures and oxides on structural steel by nanosecond laser irradiation", volume = "18", number = "3", doi = "10.1615/hightempmatproc.2015015600" }
Chumakov, A. N., Nikonchuk, I. S., Gaković, B. M., Petrović, S., Mitrić, M.,& Lupulescu, C.. (2014). Formation of microstructures and oxides on structural steel by nanosecond laser irradiation. in High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 18(3). https://doi.org/10.1615/hightempmatproc.2015015600
Chumakov AN, Nikonchuk IS, Gaković BM, Petrović S, Mitrić M, Lupulescu C. Formation of microstructures and oxides on structural steel by nanosecond laser irradiation. in High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes. 2014;18(3). doi:10.1615/hightempmatproc.2015015600 .
Chumakov, A. N., Nikonchuk, Irina S., Gaković, Biljana M., Petrović, Suzana, Mitrić, Miodrag, Lupulescu, C., "Formation of microstructures and oxides on structural steel by nanosecond laser irradiation" in High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 18, no. 3 (2014), https://doi.org/10.1615/hightempmatproc.2015015600 . .