All Publications

Link to this page

Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method

Vasiljević, Zorka Ž.; Dojčinović, Milena; Vujančević, Jelena; Janković-Častvan, Ivona; Ognjanović, Miloš; Tadić, Nenad B.; Stojadinović, Stevan; Branković, Goran O.; Nikolić, Maria Vesna

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Janković-Častvan, Ivona
AU  - Ognjanović, Miloš
AU  - Tadić, Nenad B.
AU  - Stojadinović, Stevan
AU  - Branković, Goran O.
AU  - Nikolić, Maria Vesna
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9706
AB  - The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.
T2  - Royal Society Open Science
T1  - Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method
VL  - 7
IS  - 9
SP  - 200708
DO  - 10.1098/rsos.200708
ER  - 
@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Janković-Častvan, Ivona and Ognjanović, Miloš and Tadić, Nenad B. and Stojadinović, Stevan and Branković, Goran O. and Nikolić, Maria Vesna",
abstract = "The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.",
journal = "Royal Society Open Science",
title = "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method",
volume = "7",
number = "9",
pages = "200708",
doi = "10.1098/rsos.200708"
}
Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J., Janković-Častvan, I., Ognjanović, M., Tadić, N. B., Stojadinović, S., Branković, G. O.,& Nikolić, M. V..Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science, 7(9), 200708.
https://doi.org/10.1098/rsos.200708
Vasiljević ZŽ, Dojčinović M, Vujančević J, Janković-Častvan I, Ognjanović M, Tadić NB, Stojadinović S, Branković GO, Nikolić MV. Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science.7(9):200708.
doi:10.1098/rsos.200708 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Janković-Častvan, Ivona, Ognjanović, Miloš, Tadić, Nenad B., Stojadinović, Stevan, Branković, Goran O., Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method" in Royal Society Open Science, 7, no. 9:200708,
https://doi.org/10.1098/rsos.200708 . .
10
5
10

Association study of rs7799039, rs1137101 and rs8192678 gene variants with disease susceptibility/severity and corresponding LEP, LEPR and PGC1A gene expression in multiple sclerosis

Kolić, Ivana; Stojković, Ljiljana S.; Stanković, Aleksandra; Stefanović, Milan; Dinčić, Evica; Živković, Maja

(2021)

TY  - JOUR
AU  - Kolić, Ivana
AU  - Stojković, Ljiljana S.
AU  - Stanković, Aleksandra
AU  - Stefanović, Milan
AU  - Dinčić, Evica
AU  - Živković, Maja
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9542
AB  - Background: Leptin (LEP), leptin receptor (LEPR) and peroxisome proliferator-activated receptor gamma co-activator 1-alpha (PGC1A) are involved in the pathogenesis of multiple sclerosis (MS) by affecting the inflammatory response and reactive oxygen species production. LEP rs7799039 and LEPR rs1137101 genetic variants modify the serum LEP levels and PGC1A rs8192678 alters the PGC1A activity. The study objective was to explore the associations of these variants with susceptibility to MS, disease course/clinical parameters and also with peripheral blood mononuclear cell expression of the target genes and plasma LEP concentrations, in the study subjects. Methods: The study groups included 528 patients with MS and 429 controls. TaqMan® assays were used for genotyping and gene expression quantification. The Chi-square, parametric and nonparametric tests and simple/multiple logistic regression were performed for the statistical analysis of data. Results: A multiple logistic regression model including all three investigated variants, applied to patients (RRMS + SPMS) and controls, showed that PGC1A rs8192678 minor allele had an increased risk for the occurrence of disease, with OR (95%CI) = 1,32 (1,01–1,73), P = 0,04. Between-effect of gender and LEPR variant on the multiple sclerosis severity score (MSSS) was identified (P = 0,005). In male patients (relapsing-remitting and secondary progressive), LEPR minor allele carriers had increased MSSS (GG + AG vs AA, median (minimum–maximum) = 5,38 (0,64–9,88) vs 4,27 (0,78–9,63); P = 0,01, Padj = 0,03). In relapsing-remitting patients LEP rs7799039 affected the LEP gene expression (P = 0,006; Padj = 0,04). Conclusion: The current findings implicate an impact of investigated genetic variants on the pathogenesis of MS. © 2021 Elsevier B.V.
T2  - Gene
T1  - Association study of rs7799039, rs1137101 and rs8192678 gene variants with disease susceptibility/severity and corresponding LEP, LEPR and PGC1A gene expression in multiple sclerosis
VL  - 774
SP  - 145422
DO  - 10.1016/j.gene.2021.145422
ER  - 
@article{
author = "Kolić, Ivana and Stojković, Ljiljana S. and Stanković, Aleksandra and Stefanović, Milan and Dinčić, Evica and Živković, Maja",
year = "2021",
abstract = "Background: Leptin (LEP), leptin receptor (LEPR) and peroxisome proliferator-activated receptor gamma co-activator 1-alpha (PGC1A) are involved in the pathogenesis of multiple sclerosis (MS) by affecting the inflammatory response and reactive oxygen species production. LEP rs7799039 and LEPR rs1137101 genetic variants modify the serum LEP levels and PGC1A rs8192678 alters the PGC1A activity. The study objective was to explore the associations of these variants with susceptibility to MS, disease course/clinical parameters and also with peripheral blood mononuclear cell expression of the target genes and plasma LEP concentrations, in the study subjects. Methods: The study groups included 528 patients with MS and 429 controls. TaqMan® assays were used for genotyping and gene expression quantification. The Chi-square, parametric and nonparametric tests and simple/multiple logistic regression were performed for the statistical analysis of data. Results: A multiple logistic regression model including all three investigated variants, applied to patients (RRMS + SPMS) and controls, showed that PGC1A rs8192678 minor allele had an increased risk for the occurrence of disease, with OR (95%CI) = 1,32 (1,01–1,73), P = 0,04. Between-effect of gender and LEPR variant on the multiple sclerosis severity score (MSSS) was identified (P = 0,005). In male patients (relapsing-remitting and secondary progressive), LEPR minor allele carriers had increased MSSS (GG + AG vs AA, median (minimum–maximum) = 5,38 (0,64–9,88) vs 4,27 (0,78–9,63); P = 0,01, Padj = 0,03). In relapsing-remitting patients LEP rs7799039 affected the LEP gene expression (P = 0,006; Padj = 0,04). Conclusion: The current findings implicate an impact of investigated genetic variants on the pathogenesis of MS. © 2021 Elsevier B.V.",
journal = "Gene",
title = "Association study of rs7799039, rs1137101 and rs8192678 gene variants with disease susceptibility/severity and corresponding LEP, LEPR and PGC1A gene expression in multiple sclerosis",
volume = "774",
pages = "145422",
doi = "10.1016/j.gene.2021.145422"
}
Kolić, I., Stojković, L. S., Stanković, A., Stefanović, M., Dinčić, E.,& Živković, M.. (2021). Association study of rs7799039, rs1137101 and rs8192678 gene variants with disease susceptibility/severity and corresponding LEP, LEPR and PGC1A gene expression in multiple sclerosis. in Gene, 774, 145422.
https://doi.org/10.1016/j.gene.2021.145422
Kolić I, Stojković LS, Stanković A, Stefanović M, Dinčić E, Živković M. Association study of rs7799039, rs1137101 and rs8192678 gene variants with disease susceptibility/severity and corresponding LEP, LEPR and PGC1A gene expression in multiple sclerosis. in Gene. 2021;774:145422.
doi:10.1016/j.gene.2021.145422 .
Kolić, Ivana, Stojković, Ljiljana S., Stanković, Aleksandra, Stefanović, Milan, Dinčić, Evica, Živković, Maja, "Association study of rs7799039, rs1137101 and rs8192678 gene variants with disease susceptibility/severity and corresponding LEP, LEPR and PGC1A gene expression in multiple sclerosis" in Gene, 774 (2021):145422,
https://doi.org/10.1016/j.gene.2021.145422 . .
1

Is There a FADS2-Modulated Link between Long-Chain Polyunsaturated Fatty Acids in Plasma Phospholipids and Polyphenol Intake in Adult Subjects Who Are Overweight?

Zec, Manja M.; Krga, Irena; Stojković, Ljiljana S.; Živković, Maja; Pokimica, Biljana; Stanković, Aleksandra; Glibetić, Maria

(2021)

TY  - JOUR
AU  - Zec, Manja M.
AU  - Krga, Irena
AU  - Stojković, Ljiljana S.
AU  - Živković, Maja
AU  - Pokimica, Biljana
AU  - Stanković, Aleksandra
AU  - Glibetić, Maria
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9546
AB  - Dietary polyphenols promote cardiometabolic health and are linked with long-chain polyunsaturated fatty acids in plasma phospholipids (LC-PUFA). The FADS2 polymorphisms are associated with LC-PUFA metabolism and overweight/obesity. This 4-week study examined the link between polyphenol intake, FADS2 variants (rs174593, rs174616, rs174576) and obesity in 62 overweight adults (BMI ≥ 25), allocated to consume 100 mL daily of either: Aronia juice, a rich source of polyphenols, with 1177.11 mg polyphenols (expressed as gallic acid equivalents)/100 mL (AJ, n = 22), Aronia juice with 294.28 mg polyphenols/100 mL (MJ, n = 20), or nutritionally matched polyphenol-lacking placebo as a control (PLB, n = 20). We analyzed LC-PUFA (% of total pool) by gas chromatography and FADS2 variants by real-time PCR. Four-week changes in LC-PUFA, BMI, and body weight were included in statistical models, controlling for gender and PUFA intake. Only upon AJ and MJ, the presence of FADS2 variant alleles affected changes in linoleic, arachidonic, and eicosapentaenoic acid (EPA). Upon MJ treatment, changes in EPA were inversely linked with changes in BMI (β= −0.73, p = 0.029) and weight gain (β= −2.17, p = 0.024). Only in subjects drinking AJ, the link between changes in EPA and anthropometric indices was modified by the rs174576 variant allele. Our results indicate the interaction between FADS2, fatty acid metabolism, and polyphenol intake in overweight subjects.
T2  - Nutrients
T1  - Is There a FADS2-Modulated Link between Long-Chain Polyunsaturated Fatty Acids in Plasma Phospholipids and Polyphenol Intake in Adult Subjects Who Are Overweight?
VL  - 13
IS  - 2
SP  - 296
DO  - 10.3390/nu13020296
ER  - 
@article{
author = "Zec, Manja M. and Krga, Irena and Stojković, Ljiljana S. and Živković, Maja and Pokimica, Biljana and Stanković, Aleksandra and Glibetić, Maria",
year = "2021",
abstract = "Dietary polyphenols promote cardiometabolic health and are linked with long-chain polyunsaturated fatty acids in plasma phospholipids (LC-PUFA). The FADS2 polymorphisms are associated with LC-PUFA metabolism and overweight/obesity. This 4-week study examined the link between polyphenol intake, FADS2 variants (rs174593, rs174616, rs174576) and obesity in 62 overweight adults (BMI ≥ 25), allocated to consume 100 mL daily of either: Aronia juice, a rich source of polyphenols, with 1177.11 mg polyphenols (expressed as gallic acid equivalents)/100 mL (AJ, n = 22), Aronia juice with 294.28 mg polyphenols/100 mL (MJ, n = 20), or nutritionally matched polyphenol-lacking placebo as a control (PLB, n = 20). We analyzed LC-PUFA (% of total pool) by gas chromatography and FADS2 variants by real-time PCR. Four-week changes in LC-PUFA, BMI, and body weight were included in statistical models, controlling for gender and PUFA intake. Only upon AJ and MJ, the presence of FADS2 variant alleles affected changes in linoleic, arachidonic, and eicosapentaenoic acid (EPA). Upon MJ treatment, changes in EPA were inversely linked with changes in BMI (β= −0.73, p = 0.029) and weight gain (β= −2.17, p = 0.024). Only in subjects drinking AJ, the link between changes in EPA and anthropometric indices was modified by the rs174576 variant allele. Our results indicate the interaction between FADS2, fatty acid metabolism, and polyphenol intake in overweight subjects.",
journal = "Nutrients",
title = "Is There a FADS2-Modulated Link between Long-Chain Polyunsaturated Fatty Acids in Plasma Phospholipids and Polyphenol Intake in Adult Subjects Who Are Overweight?",
volume = "13",
number = "2",
pages = "296",
doi = "10.3390/nu13020296"
}
Zec, M. M., Krga, I., Stojković, L. S., Živković, M., Pokimica, B., Stanković, A.,& Glibetić, M.. (2021). Is There a FADS2-Modulated Link between Long-Chain Polyunsaturated Fatty Acids in Plasma Phospholipids and Polyphenol Intake in Adult Subjects Who Are Overweight?. in Nutrients, 13(2), 296.
https://doi.org/10.3390/nu13020296
Zec MM, Krga I, Stojković LS, Živković M, Pokimica B, Stanković A, Glibetić M. Is There a FADS2-Modulated Link between Long-Chain Polyunsaturated Fatty Acids in Plasma Phospholipids and Polyphenol Intake in Adult Subjects Who Are Overweight?. in Nutrients. 2021;13(2):296.
doi:10.3390/nu13020296 .
Zec, Manja M., Krga, Irena, Stojković, Ljiljana S., Živković, Maja, Pokimica, Biljana, Stanković, Aleksandra, Glibetić, Maria, "Is There a FADS2-Modulated Link between Long-Chain Polyunsaturated Fatty Acids in Plasma Phospholipids and Polyphenol Intake in Adult Subjects Who Are Overweight?" in Nutrients, 13, no. 2 (2021):296,
https://doi.org/10.3390/nu13020296 . .
3
1
1

Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme

Janković, Bojan; Manić, Nebojša

(2021)

TY  - JOUR
AU  - Janković, Bojan
AU  - Manić, Nebojša
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9724
AB  - Thermally accelerated oxidative degradation of wolfberry pulp was kinetically monitored using model-free and model-based approaches. Kinetic calculations were performed based on simultaneous thermal analysis measurements in an air at four different heating rates. From kinetic analysis, new developed mechanistic scheme which is responsible for wolfberries anti-oxidative behavior was proposed. It was found that thermo-oxidative process proceeds through multiplestep mechanism including sum of two independent reaction sets, via consecutive and competitive steps. It was established that rutoside degradation pathway to flavonol through hydrolysis reaction is rate-determining step of considered process. Furthermore, it was found that key flavonol compound degraded by competitive reactions mechanism forming such kinetic branches, which lead to compounds responsible for wolfberries antioxidant activity. It was established that flavonol oxidative cleavage reaction and oxidative polymerization are main chemical routes which are very important in a complex antioxidant mechanism for scavenging free radicals in wolfberries oxidative stress response.
T2  - Food Chemistry
T1  - Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme
VL  - 343
SP  - 128530
DO  - 10.1016/j.foodchem.2020.128530
ER  - 
@article{
author = "Janković, Bojan and Manić, Nebojša",
year = "2021",
abstract = "Thermally accelerated oxidative degradation of wolfberry pulp was kinetically monitored using model-free and model-based approaches. Kinetic calculations were performed based on simultaneous thermal analysis measurements in an air at four different heating rates. From kinetic analysis, new developed mechanistic scheme which is responsible for wolfberries anti-oxidative behavior was proposed. It was found that thermo-oxidative process proceeds through multiplestep mechanism including sum of two independent reaction sets, via consecutive and competitive steps. It was established that rutoside degradation pathway to flavonol through hydrolysis reaction is rate-determining step of considered process. Furthermore, it was found that key flavonol compound degraded by competitive reactions mechanism forming such kinetic branches, which lead to compounds responsible for wolfberries antioxidant activity. It was established that flavonol oxidative cleavage reaction and oxidative polymerization are main chemical routes which are very important in a complex antioxidant mechanism for scavenging free radicals in wolfberries oxidative stress response.",
journal = "Food Chemistry",
title = "Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme",
volume = "343",
pages = "128530",
doi = "10.1016/j.foodchem.2020.128530"
}
Janković, B.,& Manić, N.. (2021). Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme. in Food Chemistry, 343, 128530.
https://doi.org/10.1016/j.foodchem.2020.128530
Janković B, Manić N. Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme. in Food Chemistry. 2021;343:128530.
doi:10.1016/j.foodchem.2020.128530 .
Janković, Bojan, Manić, Nebojša, "Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme" in Food Chemistry, 343 (2021):128530,
https://doi.org/10.1016/j.foodchem.2020.128530 . .

Improved TGA-MS measurements for evolved gas analysis (EGA) during pyrolysis process of various biomass feedstocks. Syngas energy balance determination

Radojević, Miloš; Janković, Bojan Ž.; Stojiljković, Dragoslava; Jovanović, Vladimir; Čeković, Ivana; Manić, Nebojša G.

(2021)

TY  - JOUR
AU  - Radojević, Miloš
AU  - Janković, Bojan Ž.
AU  - Stojiljković, Dragoslava
AU  - Jovanović, Vladimir
AU  - Čeković, Ivana
AU  - Manić, Nebojša G.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9138
AB  - This paper provides in-depth knowledge about the evolved gas analysis interpretation via newly proposed semi-quantitative approach, arising from thermogravimetric analysis (TGA) – mass spectrometry (MS) coupled measurements, for studying pyrolysis behavior of three kinds of biomass waste materials (spent coffee grounds, beech sawdust and wheat straw). TGA – MS coupling allows accurate correlation between molecular ion peak and fragment peaks to the corresponding mass loss rates from derivative thermogravimetry curves. Within proposed semi-quantitative analysis, MS spectra were interpreted through the comparative analysis of compounds fragments and of the compound itself, where the single atomic mass unit was identified by multiple compounds exhibition. It was shown that by this procedure which involves overlapping multiple curves supervising, the identification of gases in volatiles complex scheme becomes more simplified. By setting up semi-quantitative formulas, easy and reliable calculations of gaseous products yield and syngas energy capacities are possible to achieve. The H2/CO ratio derived from the proposed method for wood waste product (sawdust) is in an excellent agreement with H2/CO ratio for sawdust syngas production, in fuel reactor for biomass gasification and H2 production. © 2021 Elsevier B.V.
T2  - Thermochimica Acta
T1  - Improved TGA-MS measurements for evolved gas analysis (EGA) during pyrolysis process of various biomass feedstocks. Syngas energy balance determination
VL  - 699
SP  - 178912
DO  - 10.1016/j.tca.2021.178912
ER  - 
@article{
author = "Radojević, Miloš and Janković, Bojan Ž. and Stojiljković, Dragoslava and Jovanović, Vladimir and Čeković, Ivana and Manić, Nebojša G.",
year = "2021",
abstract = "This paper provides in-depth knowledge about the evolved gas analysis interpretation via newly proposed semi-quantitative approach, arising from thermogravimetric analysis (TGA) – mass spectrometry (MS) coupled measurements, for studying pyrolysis behavior of three kinds of biomass waste materials (spent coffee grounds, beech sawdust and wheat straw). TGA – MS coupling allows accurate correlation between molecular ion peak and fragment peaks to the corresponding mass loss rates from derivative thermogravimetry curves. Within proposed semi-quantitative analysis, MS spectra were interpreted through the comparative analysis of compounds fragments and of the compound itself, where the single atomic mass unit was identified by multiple compounds exhibition. It was shown that by this procedure which involves overlapping multiple curves supervising, the identification of gases in volatiles complex scheme becomes more simplified. By setting up semi-quantitative formulas, easy and reliable calculations of gaseous products yield and syngas energy capacities are possible to achieve. The H2/CO ratio derived from the proposed method for wood waste product (sawdust) is in an excellent agreement with H2/CO ratio for sawdust syngas production, in fuel reactor for biomass gasification and H2 production. © 2021 Elsevier B.V.",
journal = "Thermochimica Acta",
title = "Improved TGA-MS measurements for evolved gas analysis (EGA) during pyrolysis process of various biomass feedstocks. Syngas energy balance determination",
volume = "699",
pages = "178912",
doi = "10.1016/j.tca.2021.178912"
}
Radojević, M., Janković, B. Ž., Stojiljković, D., Jovanović, V., Čeković, I.,& Manić, N. G.. (2021). Improved TGA-MS measurements for evolved gas analysis (EGA) during pyrolysis process of various biomass feedstocks. Syngas energy balance determination. in Thermochimica Acta, 699, 178912.
https://doi.org/10.1016/j.tca.2021.178912
Radojević M, Janković BŽ, Stojiljković D, Jovanović V, Čeković I, Manić NG. Improved TGA-MS measurements for evolved gas analysis (EGA) during pyrolysis process of various biomass feedstocks. Syngas energy balance determination. in Thermochimica Acta. 2021;699:178912.
doi:10.1016/j.tca.2021.178912 .
Radojević, Miloš, Janković, Bojan Ž., Stojiljković, Dragoslava, Jovanović, Vladimir, Čeković, Ivana, Manić, Nebojša G., "Improved TGA-MS measurements for evolved gas analysis (EGA) during pyrolysis process of various biomass feedstocks. Syngas energy balance determination" in Thermochimica Acta, 699 (2021):178912,
https://doi.org/10.1016/j.tca.2021.178912 . .
2
1
2

Pyrolysis kinetics of Poplar fluff bio-char produced at high carbonization temperature: A mechanistic study and isothermal life-time prediction

Janković, Bojan Ž.; Manić, Nebojša G.; Dodevski, Vladimir

(2021)

TY  - JOUR
AU  - Janković, Bojan Ž.
AU  - Manić, Nebojša G.
AU  - Dodevski, Vladimir
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9161
AB  - This paper provides insights into understanding the physical and chemical changes that take place during re-heating process of Poplar fluff bio-char derived by carbonization at high operating temperature (850 °C). Bio-char re-heating experiments were performed by simultaneous TGA-DTG-DSC techniques in N2 atmosphere at 5, 10, 15 and 20 °C min−1. Kinetic modeling of the process was done through implementation of model-free and model-based approaches. It was identified that re-heating process contains two stages. The first was described by single consecutive reaction step (up to 200 °C) which is attributed to removal of physisorbed moisture at surface and in pores of carbonized material, while second was described by multiple reactions, including one consecutive step and two competitive steps. In the last, consecutive pathway includes reduction of PAH compounds (400–600 °C) into smaller ones, changing degree of condensation of carbon structure continuously. Competitive steps encompass competition between C10H8 (naphthalene) (700–780 °C) and C9H8 (indene) (700–750 °C) molecules decomposition. It was found that used heating rates have great influence on regulating the amount of gaseous (combustible) products from these reactions. It was established that internal heat and mass transfer processes control the release of products. Changing the pyrolysis mechanism with temperature of carbonized bio-char is the main factor for occurrence of true kinetic compensation effect, which is also discussed by applied isothermal life-time analysis. © 2021 Elsevier Ltd
T2  - Fuel
T1  - Pyrolysis kinetics of Poplar fluff bio-char produced at high carbonization temperature: A mechanistic study and isothermal life-time prediction
VL  - 296
SP  - 120637
DO  - 10.1016/j.fuel.2021.120637
ER  - 
@article{
author = "Janković, Bojan Ž. and Manić, Nebojša G. and Dodevski, Vladimir",
year = "2021",
abstract = "This paper provides insights into understanding the physical and chemical changes that take place during re-heating process of Poplar fluff bio-char derived by carbonization at high operating temperature (850 °C). Bio-char re-heating experiments were performed by simultaneous TGA-DTG-DSC techniques in N2 atmosphere at 5, 10, 15 and 20 °C min−1. Kinetic modeling of the process was done through implementation of model-free and model-based approaches. It was identified that re-heating process contains two stages. The first was described by single consecutive reaction step (up to 200 °C) which is attributed to removal of physisorbed moisture at surface and in pores of carbonized material, while second was described by multiple reactions, including one consecutive step and two competitive steps. In the last, consecutive pathway includes reduction of PAH compounds (400–600 °C) into smaller ones, changing degree of condensation of carbon structure continuously. Competitive steps encompass competition between C10H8 (naphthalene) (700–780 °C) and C9H8 (indene) (700–750 °C) molecules decomposition. It was found that used heating rates have great influence on regulating the amount of gaseous (combustible) products from these reactions. It was established that internal heat and mass transfer processes control the release of products. Changing the pyrolysis mechanism with temperature of carbonized bio-char is the main factor for occurrence of true kinetic compensation effect, which is also discussed by applied isothermal life-time analysis. © 2021 Elsevier Ltd",
journal = "Fuel",
title = "Pyrolysis kinetics of Poplar fluff bio-char produced at high carbonization temperature: A mechanistic study and isothermal life-time prediction",
volume = "296",
pages = "120637",
doi = "10.1016/j.fuel.2021.120637"
}
Janković, B. Ž., Manić, N. G.,& Dodevski, V.. (2021). Pyrolysis kinetics of Poplar fluff bio-char produced at high carbonization temperature: A mechanistic study and isothermal life-time prediction. in Fuel, 296, 120637.
https://doi.org/10.1016/j.fuel.2021.120637
Janković BŽ, Manić NG, Dodevski V. Pyrolysis kinetics of Poplar fluff bio-char produced at high carbonization temperature: A mechanistic study and isothermal life-time prediction. in Fuel. 2021;296:120637.
doi:10.1016/j.fuel.2021.120637 .
Janković, Bojan Ž., Manić, Nebojša G., Dodevski, Vladimir, "Pyrolysis kinetics of Poplar fluff bio-char produced at high carbonization temperature: A mechanistic study and isothermal life-time prediction" in Fuel, 296 (2021):120637,
https://doi.org/10.1016/j.fuel.2021.120637 . .
1

Alignment-free method for functional annotation of amino acid substitutions: Application on epigenetic factors involved in hematologic malignancies

Gemović, Branislava S.; Perović, Vladimir R.; Davidović, Radoslav S.; Drljača, Tamara; Veljković, Nevena V.

(2021)

TY  - JOUR
AU  - Gemović, Branislava S.
AU  - Perović, Vladimir R.
AU  - Davidović, Radoslav S.
AU  - Drljača, Tamara
AU  - Veljković, Nevena V.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8894
AB  - For the last couple of decades, there has been a significant growth in sequencing data, leading to an extraordinary increase in the number of gene variants. This places a challenge on the bioinformatics research community to develop and improve computational tools for functional annotation of new variants. Genes coding for epigenetic regulators have important roles in cancer pathogenesis and mutations in these genes show great potential as clinical biomarkers, especially in hematologic malignancies. Therefore, we developed a model that specifically focuses on these genes, with an assumption that it would outperform general models in predicting the functional effects of amino acid substitutions. EpiMut is a standalone software that implements a sequence based alignment-free method. We applied a two-step approach for generating sequence based features, relying on the biophysical and biochemical indices of amino acids and the Fourier Transform as a sequence transformation method. For each gene in the dataset, the machine learning algorithm–Naïve Bayes was used for building a model for prediction of the neutral or disease-related status of variants. EpiMut outperformed state-of-the-art tools used for comparison, PolyPhen-2, SIFT and SNAP2. Additionally, EpiMut showed the highest performance on the subset of variants positioned outside conserved functional domains of analysed proteins, which represents an important group of cancer-related variants. These results imply that EpiMut can be applied as a first choice tool in research of the impact of gene variants in epigenetic regulators, especially in the light of the biomarker role in hematologic malignancies. EpiMut is freely available at https://www.vin.bg.ac.rs/180/tools/epimut.php.
T2  - PLOS One
T1  - Alignment-free method for functional annotation of amino acid substitutions: Application on epigenetic factors involved in hematologic malignancies
VL  - 16
IS  - 1
SP  - e0244948
DO  - 10.1371/journal.pone.0244948
ER  - 
@article{
author = "Gemović, Branislava S. and Perović, Vladimir R. and Davidović, Radoslav S. and Drljača, Tamara and Veljković, Nevena V.",
year = "2021",
abstract = "For the last couple of decades, there has been a significant growth in sequencing data, leading to an extraordinary increase in the number of gene variants. This places a challenge on the bioinformatics research community to develop and improve computational tools for functional annotation of new variants. Genes coding for epigenetic regulators have important roles in cancer pathogenesis and mutations in these genes show great potential as clinical biomarkers, especially in hematologic malignancies. Therefore, we developed a model that specifically focuses on these genes, with an assumption that it would outperform general models in predicting the functional effects of amino acid substitutions. EpiMut is a standalone software that implements a sequence based alignment-free method. We applied a two-step approach for generating sequence based features, relying on the biophysical and biochemical indices of amino acids and the Fourier Transform as a sequence transformation method. For each gene in the dataset, the machine learning algorithm–Naïve Bayes was used for building a model for prediction of the neutral or disease-related status of variants. EpiMut outperformed state-of-the-art tools used for comparison, PolyPhen-2, SIFT and SNAP2. Additionally, EpiMut showed the highest performance on the subset of variants positioned outside conserved functional domains of analysed proteins, which represents an important group of cancer-related variants. These results imply that EpiMut can be applied as a first choice tool in research of the impact of gene variants in epigenetic regulators, especially in the light of the biomarker role in hematologic malignancies. EpiMut is freely available at https://www.vin.bg.ac.rs/180/tools/epimut.php.",
journal = "PLOS One",
title = "Alignment-free method for functional annotation of amino acid substitutions: Application on epigenetic factors involved in hematologic malignancies",
volume = "16",
number = "1",
pages = "e0244948",
doi = "10.1371/journal.pone.0244948"
}
Gemović, B. S., Perović, V. R., Davidović, R. S., Drljača, T.,& Veljković, N. V.. (2021). Alignment-free method for functional annotation of amino acid substitutions: Application on epigenetic factors involved in hematologic malignancies. in PLOS One, 16(1), e0244948.
https://doi.org/10.1371/journal.pone.0244948
Gemović BS, Perović VR, Davidović RS, Drljača T, Veljković NV. Alignment-free method for functional annotation of amino acid substitutions: Application on epigenetic factors involved in hematologic malignancies. in PLOS One. 2021;16(1):e0244948.
doi:10.1371/journal.pone.0244948 .
Gemović, Branislava S., Perović, Vladimir R., Davidović, Radoslav S., Drljača, Tamara, Veljković, Nevena V., "Alignment-free method for functional annotation of amino acid substitutions: Application on epigenetic factors involved in hematologic malignancies" in PLOS One, 16, no. 1 (2021):e0244948,
https://doi.org/10.1371/journal.pone.0244948 . .
1

Radiation, thermo-oxidative and storage induced changes in microstructure, crystallinity and dielectric properties of (un)oriented isotactic polypropylene

Suljovrujić, Edin H.; Stojanović, Zoran S.; Dudić, Duško; Miličević, Dejan S.

(2021)

TY  - JOUR
AU  - Suljovrujić, Edin H.
AU  - Stojanović, Zoran S.
AU  - Dudić, Duško
AU  - Miličević, Dejan S.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9623
AB  - Orientation and radiation processing of polymeric materials are the main steps in certain modern technologies and have extensive applications. The properties of such treated polymers can change significantly in time and under various exploitation conditions and therefore, investigation of some specific effects of aging and storage of these systems is of great importance, although the overall degradation behavior of iPP is well known. In this work, isotactic polypropylene (iPP) samples were oriented via solid-state stretching at elevated temperature (at 100°C, up to draw ratio λ=20). This was followed by gamma irradiation in the air (up to 700 kGy) and/or thermo-oxidative (TO) aging (in oxygen, at 100°C, up to 8 days) and/or storage (at room temperature, up to 3 years). As the iPP is very sensitive to orientation and degradation, microstructures were analyzed by optical (OM) and scanning electron microscopy (SEM). Wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) were used to monitor changes in structure and recrystallization. Considering the fact that at higher irradiation doses (>200 kGy), iPP starts to gel under the ambient conditions, gel measurements were employed to determine the yield of network formation induced by irradiation of stretched structures. Irradiation, TO degradation and storage, can induce substantial alternations of (di)electric properties which can be properly connected to the changes in microstructure and crystallinity; therefore, dielectric loss analysis was performed in a wide temperature range and polar groups that were introduced in apolar iPP by oxidation were considered as tracer groups. © 2021 Elsevier Ltd
T2  - Polymer Degradation and Stability
T1  - Radiation, thermo-oxidative and storage induced changes in microstructure, crystallinity and dielectric properties of (un)oriented isotactic polypropylene
VL  - 188
SP  - 109564
DO  - 10.1016/j.polymdegradstab.2021.109564
ER  - 
@article{
author = "Suljovrujić, Edin H. and Stojanović, Zoran S. and Dudić, Duško and Miličević, Dejan S.",
year = "2021",
abstract = "Orientation and radiation processing of polymeric materials are the main steps in certain modern technologies and have extensive applications. The properties of such treated polymers can change significantly in time and under various exploitation conditions and therefore, investigation of some specific effects of aging and storage of these systems is of great importance, although the overall degradation behavior of iPP is well known. In this work, isotactic polypropylene (iPP) samples were oriented via solid-state stretching at elevated temperature (at 100°C, up to draw ratio λ=20). This was followed by gamma irradiation in the air (up to 700 kGy) and/or thermo-oxidative (TO) aging (in oxygen, at 100°C, up to 8 days) and/or storage (at room temperature, up to 3 years). As the iPP is very sensitive to orientation and degradation, microstructures were analyzed by optical (OM) and scanning electron microscopy (SEM). Wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) were used to monitor changes in structure and recrystallization. Considering the fact that at higher irradiation doses (>200 kGy), iPP starts to gel under the ambient conditions, gel measurements were employed to determine the yield of network formation induced by irradiation of stretched structures. Irradiation, TO degradation and storage, can induce substantial alternations of (di)electric properties which can be properly connected to the changes in microstructure and crystallinity; therefore, dielectric loss analysis was performed in a wide temperature range and polar groups that were introduced in apolar iPP by oxidation were considered as tracer groups. © 2021 Elsevier Ltd",
journal = "Polymer Degradation and Stability",
title = "Radiation, thermo-oxidative and storage induced changes in microstructure, crystallinity and dielectric properties of (un)oriented isotactic polypropylene",
volume = "188",
pages = "109564",
doi = "10.1016/j.polymdegradstab.2021.109564"
}
Suljovrujić, E. H., Stojanović, Z. S., Dudić, D.,& Miličević, D. S.. (2021). Radiation, thermo-oxidative and storage induced changes in microstructure, crystallinity and dielectric properties of (un)oriented isotactic polypropylene. in Polymer Degradation and Stability, 188, 109564.
https://doi.org/10.1016/j.polymdegradstab.2021.109564
Suljovrujić EH, Stojanović ZS, Dudić D, Miličević DS. Radiation, thermo-oxidative and storage induced changes in microstructure, crystallinity and dielectric properties of (un)oriented isotactic polypropylene. in Polymer Degradation and Stability. 2021;188:109564.
doi:10.1016/j.polymdegradstab.2021.109564 .
Suljovrujić, Edin H., Stojanović, Zoran S., Dudić, Duško, Miličević, Dejan S., "Radiation, thermo-oxidative and storage induced changes in microstructure, crystallinity and dielectric properties of (un)oriented isotactic polypropylene" in Polymer Degradation and Stability, 188 (2021):109564,
https://doi.org/10.1016/j.polymdegradstab.2021.109564 . .
1
1

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav; Medić, Mina; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav
AU  - Medić, Mina
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9563
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz. © 2021 The Authors
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
VL  - 96
SP  - 107093
DO  - 10.1016/j.polymertesting.2021.107093
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav and Medić, Mina and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz. © 2021 The Authors",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
volume = "96",
pages = "107093",
doi = "10.1016/j.polymertesting.2021.107093"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M., Medić, M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V.. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing, 96, 107093.
https://doi.org/10.1016/j.polymertesting.2021.107093
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin M, Medić M, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing. 2021;96:107093.
doi:10.1016/j.polymertesting.2021.107093 .
Pavlović, Vera P., Tošić, Dragana, Dojčilović, Radovan, Dudić, Duško, Dramićanin, Miroslav, Medić, Mina, McPherson, Michael M., Pavlović, Vladimir B., Vlahović, Branislav, Đoković, Vladimir, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix" in Polymer Testing, 96 (2021):107093,
https://doi.org/10.1016/j.polymertesting.2021.107093 . .
1
1
1

Cell wall response to UV radiation in needles of Picea omorika

Mitrović, Aleksandra Lj.; Simonović-Radosavljević, Jasna; Prokopijević, Miloš; Spasojević, Dragica; Kovačević, Jovana; Prodanović, Olivera; Todorović, Bratislav; Matović, Branko; Stanković, Mira; Maksimović, Vuk; Mutavdžić, Dragosav; Skočić, Miloš; Pešić, Mirjana; Prokić, Ljiljana; Radotić, Ksenija

(2021)

TY  - JOUR
AU  - Mitrović, Aleksandra Lj.
AU  - Simonović-Radosavljević, Jasna
AU  - Prokopijević, Miloš
AU  - Spasojević, Dragica
AU  - Kovačević, Jovana
AU  - Prodanović, Olivera
AU  - Todorović, Bratislav
AU  - Matović, Branko
AU  - Stanković, Mira
AU  - Maksimović, Vuk
AU  - Mutavdžić, Dragosav
AU  - Skočić, Miloš
AU  - Pešić, Mirjana
AU  - Prokić, Ljiljana
AU  - Radotić, Ksenija
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9129
AB  - The UV-B represents the minor fraction of the solar spectrum, while UV-C is not contained in natural solar radiation, but both radiation types can cause damaging effects in plants. Cell walls (CWs) are one of the targets for external stressors. Juvenile P. omorika trees were treated either with 21 day-high doses UV-B or with 7 day- UV-C in open-top chambers. Using spectroscopic and biochemical techniques, it was shown that the response to UV radiation includes numerous modifications in needle CW structure: relative content of xylan, xyloglucan, lignin and cellulose decreased; cellulose crystallinity changed; yield of lignin monomers with stronger connection of C[dbnd]C in side chain with the ring increased; re-distribution of inter- and intra-polymer H-bonds occurred. The recovery was mediated by an increase in the activities and changes in isoform profiles of CW bound covalent peroxidases (POD) and polyphenol oxidases (PO) (UV–B), and ionic POD and covalent PO (UV–C). A connection between activities of specific POD/PO isoforms and phenolic species (m- and p-coumaric acid, pinoresinol and cinnamic acid derivatives) was demonstrated, and supported by changes in the sRNA profile. In vivo fluorometry showed phenolics accumulation in needle epidermal CWs. These results imply transversal connections between polymers and changed mechanical properties of needle CW as a response to UV. The CW alterations enabled maintenance of physiological functions, as indicated by the preserved chlorophyll content and/or organization. The current study provides evidence that in conifers, needle CW response to both UV-B and UV-C includes biochemical modifications and structural remodeling. © 2021 Elsevier Masson SAS
T2  - Plant Physiology and Biochemistry
T1  - Cell wall response to UV radiation in needles of Picea omorika
VL  - 161
SP  - 176
EP  - 190
DO  - 10.1016/j.plaphy.2021.02.007
ER  - 
@article{
author = "Mitrović, Aleksandra Lj. and Simonović-Radosavljević, Jasna and Prokopijević, Miloš and Spasojević, Dragica and Kovačević, Jovana and Prodanović, Olivera and Todorović, Bratislav and Matović, Branko and Stanković, Mira and Maksimović, Vuk and Mutavdžić, Dragosav and Skočić, Miloš and Pešić, Mirjana and Prokić, Ljiljana and Radotić, Ksenija",
year = "2021",
abstract = "The UV-B represents the minor fraction of the solar spectrum, while UV-C is not contained in natural solar radiation, but both radiation types can cause damaging effects in plants. Cell walls (CWs) are one of the targets for external stressors. Juvenile P. omorika trees were treated either with 21 day-high doses UV-B or with 7 day- UV-C in open-top chambers. Using spectroscopic and biochemical techniques, it was shown that the response to UV radiation includes numerous modifications in needle CW structure: relative content of xylan, xyloglucan, lignin and cellulose decreased; cellulose crystallinity changed; yield of lignin monomers with stronger connection of C[dbnd]C in side chain with the ring increased; re-distribution of inter- and intra-polymer H-bonds occurred. The recovery was mediated by an increase in the activities and changes in isoform profiles of CW bound covalent peroxidases (POD) and polyphenol oxidases (PO) (UV–B), and ionic POD and covalent PO (UV–C). A connection between activities of specific POD/PO isoforms and phenolic species (m- and p-coumaric acid, pinoresinol and cinnamic acid derivatives) was demonstrated, and supported by changes in the sRNA profile. In vivo fluorometry showed phenolics accumulation in needle epidermal CWs. These results imply transversal connections between polymers and changed mechanical properties of needle CW as a response to UV. The CW alterations enabled maintenance of physiological functions, as indicated by the preserved chlorophyll content and/or organization. The current study provides evidence that in conifers, needle CW response to both UV-B and UV-C includes biochemical modifications and structural remodeling. © 2021 Elsevier Masson SAS",
journal = "Plant Physiology and Biochemistry",
title = "Cell wall response to UV radiation in needles of Picea omorika",
volume = "161",
pages = "176-190",
doi = "10.1016/j.plaphy.2021.02.007"
}
Mitrović, A. Lj., Simonović-Radosavljević, J., Prokopijević, M., Spasojević, D., Kovačević, J., Prodanović, O., Todorović, B., Matović, B., Stanković, M., Maksimović, V., Mutavdžić, D., Skočić, M., Pešić, M., Prokić, L.,& Radotić, K.. (2021). Cell wall response to UV radiation in needles of Picea omorika. in Plant Physiology and Biochemistry, 161, 176-190.
https://doi.org/10.1016/j.plaphy.2021.02.007
Mitrović AL, Simonović-Radosavljević J, Prokopijević M, Spasojević D, Kovačević J, Prodanović O, Todorović B, Matović B, Stanković M, Maksimović V, Mutavdžić D, Skočić M, Pešić M, Prokić L, Radotić K. Cell wall response to UV radiation in needles of Picea omorika. in Plant Physiology and Biochemistry. 2021;161:176-190.
doi:10.1016/j.plaphy.2021.02.007 .
Mitrović, Aleksandra Lj., Simonović-Radosavljević, Jasna, Prokopijević, Miloš, Spasojević, Dragica, Kovačević, Jovana, Prodanović, Olivera, Todorović, Bratislav, Matović, Branko, Stanković, Mira, Maksimović, Vuk, Mutavdžić, Dragosav, Skočić, Miloš, Pešić, Mirjana, Prokić, Ljiljana, Radotić, Ksenija, "Cell wall response to UV radiation in needles of Picea omorika" in Plant Physiology and Biochemistry, 161 (2021):176-190,
https://doi.org/10.1016/j.plaphy.2021.02.007 . .
1
1

Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering

Matović, Branko; Maletaškić, Jelena; Prikhna, Tatiana; Urbanovich, Vladimir; Girman, Vladimir; Lisnichuk, Maksym; Todorović, Bratislav; Yoshida, Kutsami; Cvijović-Alagić, Ivana

(2021)

TY  - JOUR
AU  - Matović, Branko
AU  - Maletaškić, Jelena
AU  - Prikhna, Tatiana
AU  - Urbanovich, Vladimir
AU  - Girman, Vladimir
AU  - Lisnichuk, Maksym
AU  - Todorović, Bratislav
AU  - Yoshida, Kutsami
AU  - Cvijović-Alagić, Ivana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9405
AB  - Additive-free boron carbide (B4C) – silicon carbide (SiC) ceramic composites with different B4C and β-SiC powders ratio were densified using the high-pressure “anvil-type with hollows” apparatus at 1500 °C under a pressure of 4 GPa for 60 s in air. The effect of starting powders ratio on the composites sintering behavior, relative density, microstructural development, and thermomechanical properties was studied. The sintered samples hardness was found to be in the range from 24 to 31 GPa. The thermal conductivity measurements, conducted in the temperature range from room temperature to 1000 °C, showed that the thermal diffusivity of sintered samples was between 6 and 9.5 mm2/s whereas the thermal conductivity was in the range from 16 to 28 W/(m K). The results of this study show that the high-pressure sintering can be a very effective low-temperature densification method for the obtainment of additive-free B4C - β-SiC ceramic composites. © 2021 Elsevier Ltd
T2  - Journal of the European Ceramic Society
T1  - Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering
VL  - 41
IS  - 9
SP  - 4755
EP  - 4760
DO  - 10.1016/j.jeurceramsoc.2021.03.047
ER  - 
@article{
author = "Matović, Branko and Maletaškić, Jelena and Prikhna, Tatiana and Urbanovich, Vladimir and Girman, Vladimir and Lisnichuk, Maksym and Todorović, Bratislav and Yoshida, Kutsami and Cvijović-Alagić, Ivana",
year = "2021",
abstract = "Additive-free boron carbide (B4C) – silicon carbide (SiC) ceramic composites with different B4C and β-SiC powders ratio were densified using the high-pressure “anvil-type with hollows” apparatus at 1500 °C under a pressure of 4 GPa for 60 s in air. The effect of starting powders ratio on the composites sintering behavior, relative density, microstructural development, and thermomechanical properties was studied. The sintered samples hardness was found to be in the range from 24 to 31 GPa. The thermal conductivity measurements, conducted in the temperature range from room temperature to 1000 °C, showed that the thermal diffusivity of sintered samples was between 6 and 9.5 mm2/s whereas the thermal conductivity was in the range from 16 to 28 W/(m K). The results of this study show that the high-pressure sintering can be a very effective low-temperature densification method for the obtainment of additive-free B4C - β-SiC ceramic composites. © 2021 Elsevier Ltd",
journal = "Journal of the European Ceramic Society",
title = "Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering",
volume = "41",
number = "9",
pages = "4755-4760",
doi = "10.1016/j.jeurceramsoc.2021.03.047"
}
Matović, B., Maletaškić, J., Prikhna, T., Urbanovich, V., Girman, V., Lisnichuk, M., Todorović, B., Yoshida, K.,& Cvijović-Alagić, I.. (2021). Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering. in Journal of the European Ceramic Society, 41(9), 4755-4760.
https://doi.org/10.1016/j.jeurceramsoc.2021.03.047
Matović B, Maletaškić J, Prikhna T, Urbanovich V, Girman V, Lisnichuk M, Todorović B, Yoshida K, Cvijović-Alagić I. Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering. in Journal of the European Ceramic Society. 2021;41(9):4755-4760.
doi:10.1016/j.jeurceramsoc.2021.03.047 .
Matović, Branko, Maletaškić, Jelena, Prikhna, Tatiana, Urbanovich, Vladimir, Girman, Vladimir, Lisnichuk, Maksym, Todorović, Bratislav, Yoshida, Kutsami, Cvijović-Alagić, Ivana, "Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering" in Journal of the European Ceramic Society, 41, no. 9 (2021):4755-4760,
https://doi.org/10.1016/j.jeurceramsoc.2021.03.047 . .
2
2
2

Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent

Zmejkoski, Danica; Marković, Zoran M.; Zdravković, Nemanja M.; Trišić, Dijana D.; Budimir, Milica; Kuzman, Sanja; Kozyrovska, Natalia O.; Orlovska, Iryna V.; Bugárová, Nikol; Petrović, Đorđe; Kováčová, Mária; Kleinová, Angela; Špitalský, Zdeno; Pavlović, Vladimir B.; Todorović-Marković, Biljana

(2021)

TY  - JOUR
AU  - Zmejkoski, Danica
AU  - Marković, Zoran M.
AU  - Zdravković, Nemanja M.
AU  - Trišić, Dijana D.
AU  - Budimir, Milica
AU  - Kuzman, Sanja
AU  - Kozyrovska, Natalia O.
AU  - Orlovska, Iryna V.
AU  - Bugárová, Nikol
AU  - Petrović, Đorđe
AU  - Kováčová, Mária
AU  - Kleinová, Angela
AU  - Špitalský, Zdeno
AU  - Pavlović, Vladimir B.
AU  - Todorović-Marković, Biljana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9143
AB  - Therapy of bacterial urinary tract infections (UTIs) and catheter associated urinary tract infections (CAUTIs) is still a great challenge because of the resistance of bacteria to nowadays used antibiotics and encrustation of catheters. Bacterial cellulose (BC) as a biocompatible material with a high porosity allows incorporation of different materials in its three dimensional network structure. In this work a low molecular weight chitosan (Chi) polymer is incorporated in BC with different concentrations. Different characterization techniques are used to investigate structural and optical properties of these composites. Radical scavenging activity test shows moderate antioxidant activity of these biocompatible composites whereasin vitrorelease test shows that 13.3% of chitosan is released after 72 h. Antibacterial testing of BC-Chi composites conducted on Gram-positive and Gram-negative bacteria causing UTIs and CAUTIs (Escherichia coli,Pseudomonas aeruginosa,Klebsiella pneumoniae) and encrustation (Proteus mirabilis) show bactericidal effect. The morphology analysis of bacteria after the application of BC-Chi shows that they are flattened with a rough surface, with a tendency to agglomerate and with decreased length and width. All obtained results show that BC-Chi composites might be considered as potential biomedical agents in treatment of UTIs and CAUTIs and as a urinary catheter coating in encrustation prevention.
T2  - RSC Advances
T1  - Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent
VL  - 11
IS  - 15
SP  - 8559
EP  - 8568
DO  - 10.1039/D0RA10782D
ER  - 
@article{
author = "Zmejkoski, Danica and Marković, Zoran M. and Zdravković, Nemanja M. and Trišić, Dijana D. and Budimir, Milica and Kuzman, Sanja and Kozyrovska, Natalia O. and Orlovska, Iryna V. and Bugárová, Nikol and Petrović, Đorđe and Kováčová, Mária and Kleinová, Angela and Špitalský, Zdeno and Pavlović, Vladimir B. and Todorović-Marković, Biljana",
year = "2021",
abstract = "Therapy of bacterial urinary tract infections (UTIs) and catheter associated urinary tract infections (CAUTIs) is still a great challenge because of the resistance of bacteria to nowadays used antibiotics and encrustation of catheters. Bacterial cellulose (BC) as a biocompatible material with a high porosity allows incorporation of different materials in its three dimensional network structure. In this work a low molecular weight chitosan (Chi) polymer is incorporated in BC with different concentrations. Different characterization techniques are used to investigate structural and optical properties of these composites. Radical scavenging activity test shows moderate antioxidant activity of these biocompatible composites whereasin vitrorelease test shows that 13.3% of chitosan is released after 72 h. Antibacterial testing of BC-Chi composites conducted on Gram-positive and Gram-negative bacteria causing UTIs and CAUTIs (Escherichia coli,Pseudomonas aeruginosa,Klebsiella pneumoniae) and encrustation (Proteus mirabilis) show bactericidal effect. The morphology analysis of bacteria after the application of BC-Chi shows that they are flattened with a rough surface, with a tendency to agglomerate and with decreased length and width. All obtained results show that BC-Chi composites might be considered as potential biomedical agents in treatment of UTIs and CAUTIs and as a urinary catheter coating in encrustation prevention.",
journal = "RSC Advances",
title = "Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent",
volume = "11",
number = "15",
pages = "8559-8568",
doi = "10.1039/D0RA10782D"
}
Zmejkoski, D., Marković, Z. M., Zdravković, N. M., Trišić, D. D., Budimir, M., Kuzman, S., Kozyrovska, N. O., Orlovska, I. V., Bugárová, N., Petrović, Đ., Kováčová, M., Kleinová, A., Špitalský, Z., Pavlović, V. B.,& Todorović-Marković, B.. (2021). Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent. in RSC Advances, 11(15), 8559-8568.
https://doi.org/10.1039/D0RA10782D
Zmejkoski D, Marković ZM, Zdravković NM, Trišić DD, Budimir M, Kuzman S, Kozyrovska NO, Orlovska IV, Bugárová N, Petrović Đ, Kováčová M, Kleinová A, Špitalský Z, Pavlović VB, Todorović-Marković B. Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent. in RSC Advances. 2021;11(15):8559-8568.
doi:10.1039/D0RA10782D .
Zmejkoski, Danica, Marković, Zoran M., Zdravković, Nemanja M., Trišić, Dijana D., Budimir, Milica, Kuzman, Sanja, Kozyrovska, Natalia O., Orlovska, Iryna V., Bugárová, Nikol, Petrović, Đorđe, Kováčová, Mária, Kleinová, Angela, Špitalský, Zdeno, Pavlović, Vladimir B., Todorović-Marković, Biljana, "Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent" in RSC Advances, 11, no. 15 (2021):8559-8568,
https://doi.org/10.1039/D0RA10782D . .
2
1
2

Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment

Zmejkoski, Danica; Marković, Zoran M.; Budimir, Milica; Zdravković, Nemanja M.; Trišić, Dijana D.; Bugárová, Nikol; Danko, Martin; Kozyrovska, Natalia O.; Špitalský, Zdeno; Kleinová, Angela; Kuzman, Sanja; Pavlović, Vladimir B.; Todorović-Marković, Biljana

(2021)

TY  - JOUR
AU  - Zmejkoski, Danica
AU  - Marković, Zoran M.
AU  - Budimir, Milica
AU  - Zdravković, Nemanja M.
AU  - Trišić, Dijana D.
AU  - Bugárová, Nikol
AU  - Danko, Martin
AU  - Kozyrovska, Natalia O.
AU  - Špitalský, Zdeno
AU  - Kleinová, Angela
AU  - Kuzman, Sanja
AU  - Pavlović, Vladimir B.
AU  - Todorović-Marković, Biljana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9566
AB  - Bacterial infection and their resistance to known antibiotics delays wound healing. In this study, nanochitosan dots (nChiD) produced by gamma irradiation have been encapsulated in bacterial cellulose (BC) polymer matrix to study the antibacterial potentials of these nanocomposites and their possible usage in wound healing treatment (scratch assay). Detailed analyses show that nChiDs have disc-like shape and average diameter in the range of 40 to 60 nm depending of the applied dose. All nChiDs as well as BC-nChiD nanocomposites emit green photoluminescence independently on the excitation wavelengths. The new designed nanocomposites do not have a cytotoxic effect; antioxidant analysis shows their moderate radical scavenging activity whereas antibacterial properties show significant growth inhibition of strains mostly found in difficult-to-heal wounds. The obtained results confirm that new designed BC-nChiD nanocomposites might be potential agent in wound healing treatment. © 2021 Elsevier B.V.
T2  - Materials Science and Engineering: C
T1  - Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment
VL  - 122
SP  - 111925
DO  - 10.1016/j.msec.2021.111925
ER  - 
@article{
author = "Zmejkoski, Danica and Marković, Zoran M. and Budimir, Milica and Zdravković, Nemanja M. and Trišić, Dijana D. and Bugárová, Nikol and Danko, Martin and Kozyrovska, Natalia O. and Špitalský, Zdeno and Kleinová, Angela and Kuzman, Sanja and Pavlović, Vladimir B. and Todorović-Marković, Biljana",
year = "2021",
abstract = "Bacterial infection and their resistance to known antibiotics delays wound healing. In this study, nanochitosan dots (nChiD) produced by gamma irradiation have been encapsulated in bacterial cellulose (BC) polymer matrix to study the antibacterial potentials of these nanocomposites and their possible usage in wound healing treatment (scratch assay). Detailed analyses show that nChiDs have disc-like shape and average diameter in the range of 40 to 60 nm depending of the applied dose. All nChiDs as well as BC-nChiD nanocomposites emit green photoluminescence independently on the excitation wavelengths. The new designed nanocomposites do not have a cytotoxic effect; antioxidant analysis shows their moderate radical scavenging activity whereas antibacterial properties show significant growth inhibition of strains mostly found in difficult-to-heal wounds. The obtained results confirm that new designed BC-nChiD nanocomposites might be potential agent in wound healing treatment. © 2021 Elsevier B.V.",
journal = "Materials Science and Engineering: C",
title = "Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment",
volume = "122",
pages = "111925",
doi = "10.1016/j.msec.2021.111925"
}
Zmejkoski, D., Marković, Z. M., Budimir, M., Zdravković, N. M., Trišić, D. D., Bugárová, N., Danko, M., Kozyrovska, N. O., Špitalský, Z., Kleinová, A., Kuzman, S., Pavlović, V. B.,& Todorović-Marković, B.. (2021). Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment. in Materials Science and Engineering: C, 122, 111925.
https://doi.org/10.1016/j.msec.2021.111925
Zmejkoski D, Marković ZM, Budimir M, Zdravković NM, Trišić DD, Bugárová N, Danko M, Kozyrovska NO, Špitalský Z, Kleinová A, Kuzman S, Pavlović VB, Todorović-Marković B. Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment. in Materials Science and Engineering: C. 2021;122:111925.
doi:10.1016/j.msec.2021.111925 .
Zmejkoski, Danica, Marković, Zoran M., Budimir, Milica, Zdravković, Nemanja M., Trišić, Dijana D., Bugárová, Nikol, Danko, Martin, Kozyrovska, Natalia O., Špitalský, Zdeno, Kleinová, Angela, Kuzman, Sanja, Pavlović, Vladimir B., Todorović-Marković, Biljana, "Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment" in Materials Science and Engineering: C, 122 (2021):111925,
https://doi.org/10.1016/j.msec.2021.111925 . .
2
1
1

One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications

Kepić, Dejan P.; Kleut, Duška; Marković, Zoran M.; Bajuk-Bogdanović, Danica; Pavlović, Vladimir; Krmpot, Aleksandar; Lekić, Marina; Jovanović, Dragana J.; Todorović-Marković, Biljana

(2021)

TY  - JOUR
AU  - Kepić, Dejan P.
AU  - Kleut, Duška
AU  - Marković, Zoran M.
AU  - Bajuk-Bogdanović, Danica
AU  - Pavlović, Vladimir
AU  - Krmpot, Aleksandar
AU  - Lekić, Marina
AU  - Jovanović, Dragana J.
AU  - Todorović-Marković, Biljana
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9568
AB  - Graphene is an excellent material to anchor metal nanoparticles due to its large surface area. In this paper, we report the use of electrochemically exfoliated graphene as support to anchor gold nanoparticles (Au NPs). Au NPs are synthesized via the reduction of chloroauric acid under gamma irradiation at low doses of 1, 5, and 10 kGy and directly deposited onto the graphene surface, making this procedure simple and fast. Good water dispersibility of exfoliated graphene, due to the presence of oxygen-containing functional groups in the structure of graphene, provides long-term stability of Au NPs - graphene composite dispersions. The majority of the Au NPs obtained by this method have sizes of up to 40 nm, while the increase in the applied dose leads to an increase in the amount of smaller nanoparticles. The increase of temperature of the prepared composite material upon irradiation with an 808 nm continuous wave laser was monitored. All samples show a temperature increase between 21.5 and 25.6 °C for 10 min of the laser exposure, which indicates that Au NPs - graphene composite can effectively be used in photothermal treatment for cancer therapy. © 2021 Elsevier Inc.
T2  - Materials Characterization
T1  - One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications
VL  - 173
SP  - 110944
DO  - 10.1016/j.matchar.2021.110944
ER  - 
@article{
author = "Kepić, Dejan P. and Kleut, Duška and Marković, Zoran M. and Bajuk-Bogdanović, Danica and Pavlović, Vladimir and Krmpot, Aleksandar and Lekić, Marina and Jovanović, Dragana J. and Todorović-Marković, Biljana",
year = "2021",
abstract = "Graphene is an excellent material to anchor metal nanoparticles due to its large surface area. In this paper, we report the use of electrochemically exfoliated graphene as support to anchor gold nanoparticles (Au NPs). Au NPs are synthesized via the reduction of chloroauric acid under gamma irradiation at low doses of 1, 5, and 10 kGy and directly deposited onto the graphene surface, making this procedure simple and fast. Good water dispersibility of exfoliated graphene, due to the presence of oxygen-containing functional groups in the structure of graphene, provides long-term stability of Au NPs - graphene composite dispersions. The majority of the Au NPs obtained by this method have sizes of up to 40 nm, while the increase in the applied dose leads to an increase in the amount of smaller nanoparticles. The increase of temperature of the prepared composite material upon irradiation with an 808 nm continuous wave laser was monitored. All samples show a temperature increase between 21.5 and 25.6 °C for 10 min of the laser exposure, which indicates that Au NPs - graphene composite can effectively be used in photothermal treatment for cancer therapy. © 2021 Elsevier Inc.",
journal = "Materials Characterization",
title = "One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications",
volume = "173",
pages = "110944",
doi = "10.1016/j.matchar.2021.110944"
}
Kepić, D. P., Kleut, D., Marković, Z. M., Bajuk-Bogdanović, D., Pavlović, V., Krmpot, A., Lekić, M., Jovanović, D. J.,& Todorović-Marković, B.. (2021). One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications. in Materials Characterization, 173, 110944.
https://doi.org/10.1016/j.matchar.2021.110944
Kepić DP, Kleut D, Marković ZM, Bajuk-Bogdanović D, Pavlović V, Krmpot A, Lekić M, Jovanović DJ, Todorović-Marković B. One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications. in Materials Characterization. 2021;173:110944.
doi:10.1016/j.matchar.2021.110944 .
Kepić, Dejan P., Kleut, Duška, Marković, Zoran M., Bajuk-Bogdanović, Danica, Pavlović, Vladimir, Krmpot, Aleksandar, Lekić, Marina, Jovanović, Dragana J., Todorović-Marković, Biljana, "One-step preparation of gold nanoparticles - exfoliated graphene composite by gamma irradiation at low doses for photothermal therapy applications" in Materials Characterization, 173 (2021):110944,
https://doi.org/10.1016/j.matchar.2021.110944 . .

Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy

Matović, Ljiljana; Vujasin, Radojka; Kumrić, Ksenija; Krstić, Sanja S.; Wu, Yi-nan; Kabtamu, Daniel Manaye; Devečerski, Aleksandar

(2021)

TY  - JOUR
AU  - Matović, Ljiljana
AU  - Vujasin, Radojka
AU  - Kumrić, Ksenija
AU  - Krstić, Sanja S.
AU  - Wu, Yi-nan
AU  - Kabtamu, Daniel Manaye
AU  - Devečerski, Aleksandar
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9545
AB  - Development of method for the complete conversion of Cr-containing electroplating sludge (ES) into the black inorganic pigment was presented. Difficulties related to the ES complex, variable composition and inhomogeneity, where the dominant presence of Cr was followed by: Fe, P, Zn, Ni, Cu, etc., can be overcome by determination of the precise amount of Fe2O3 necessary to be added in order to firmly embed all the heavy metals into the pigment structure (i.e. the Fe0.7Cr1.3O3/FePO4 nanocomposite), taking care not only about weight/molar ratios, but also about average particle size, apparent densities, and volume fraction of the starting materials. As a source of Fe2O3, commercial (p.a.) Fe2O3 and two different Fe-wastes were used, thus completely fulfilling the principles of the circular economy. The obtained black inorganic pigments have consistent composition, no leaching of toxic metals, color (CIE L-a-b-values) comparable with those of commercial pigments and thus have the potential commercial large scale application. © 2021 Elsevier Ltd.
T2  - Journal of Environmental Chemical Engineering
T1  - Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy
VL  - 9
IS  - 1
SP  - 105038
DO  - 10.1016/j.jece.2021.105038
ER  - 
@article{
author = "Matović, Ljiljana and Vujasin, Radojka and Kumrić, Ksenija and Krstić, Sanja S. and Wu, Yi-nan and Kabtamu, Daniel Manaye and Devečerski, Aleksandar",
year = "2021",
abstract = "Development of method for the complete conversion of Cr-containing electroplating sludge (ES) into the black inorganic pigment was presented. Difficulties related to the ES complex, variable composition and inhomogeneity, where the dominant presence of Cr was followed by: Fe, P, Zn, Ni, Cu, etc., can be overcome by determination of the precise amount of Fe2O3 necessary to be added in order to firmly embed all the heavy metals into the pigment structure (i.e. the Fe0.7Cr1.3O3/FePO4 nanocomposite), taking care not only about weight/molar ratios, but also about average particle size, apparent densities, and volume fraction of the starting materials. As a source of Fe2O3, commercial (p.a.) Fe2O3 and two different Fe-wastes were used, thus completely fulfilling the principles of the circular economy. The obtained black inorganic pigments have consistent composition, no leaching of toxic metals, color (CIE L-a-b-values) comparable with those of commercial pigments and thus have the potential commercial large scale application. © 2021 Elsevier Ltd.",
journal = "Journal of Environmental Chemical Engineering",
title = "Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy",
volume = "9",
number = "1",
pages = "105038",
doi = "10.1016/j.jece.2021.105038"
}
Matović, L., Vujasin, R., Kumrić, K., Krstić, S. S., Wu, Y., Kabtamu, D. M.,& Devečerski, A.. (2021). Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy. in Journal of Environmental Chemical Engineering, 9(1), 105038.
https://doi.org/10.1016/j.jece.2021.105038
Matović L, Vujasin R, Kumrić K, Krstić SS, Wu Y, Kabtamu DM, Devečerski A. Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy. in Journal of Environmental Chemical Engineering. 2021;9(1):105038.
doi:10.1016/j.jece.2021.105038 .
Matović, Ljiljana, Vujasin, Radojka, Kumrić, Ksenija, Krstić, Sanja S., Wu, Yi-nan, Kabtamu, Daniel Manaye, Devečerski, Aleksandar, "Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy" in Journal of Environmental Chemical Engineering, 9, no. 1 (2021):105038,
https://doi.org/10.1016/j.jece.2021.105038 . .
2
1
2

Exploring UiO-66(Zr) frameworks as nanotraps for highly efficient removal of EDTA-complexed heavy metals from water

Lou, Xiaofei; Wu, Yi-nan; Kabtamu, Daniel Manaye; Matović, Ljiljana; Zhang, Yanxing; Sun, Xianyi; Schott, Eduardo; Chu, Wenhai; Li, Fengting

(2021)

TY  - JOUR
AU  - Lou, Xiaofei
AU  - Wu, Yi-nan
AU  - Kabtamu, Daniel Manaye
AU  - Matović, Ljiljana
AU  - Zhang, Yanxing
AU  - Sun, Xianyi
AU  - Schott, Eduardo
AU  - Chu, Wenhai
AU  - Li, Fengting
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8919
AB  - Metal-organic frameworks (MOFs), an exciting class of porous crystalline materials, are suitable for adsorptive removal of toxic heavy metal-ethylenediaminetetraacetic acid (M-EDTA) complexes from wastewater. In this paper, water-stable UiO-66(Zr) with well-defined morphology was successfully synthesized through a facile microwave-assisted solvothermal method and employed as nanotraps for the efficient capture of the three M-EDTA complexes, Cu-EDTA, Pb-EDTA, and Ni-EDTA. The adsorption behaviors, effects of solution pH and co-existing anions, as well as the eluant and desorption were investigated. The obtained UiO-66(Zr) showed good stability and excellent uptake capacity of M-EDTA in a wide pH range (3.0-10.0). UiO-66(Zr) exhibited a higher removal efficiency of Cu-EDTA (57.56 mg/g), Pb-EDTA (120.6 mg/g), and Ni-EDTA (54.27 mg/g). Based on the overall analysis results, our findings show that EDTA-metal complex ions can be adsorbed inside UiO-66(Zr) mainly through the Lewis-acid/-base interactions and possible anion-πinteraction with strong binding energies. Size-matching EDTA-metal complexes confined in the UiO-66(Zr) with flexible geometry would also contribute to the fast adsorption kinetics as well as the selective adsorption of different M-EDTA complexes. © 2020 Elsevier Ltd.
T2  - Journal of Environmental Chemical Engineering
T1  - Exploring UiO-66(Zr) frameworks as nanotraps for highly efficient removal of EDTA-complexed heavy metals from water
VL  - 9
IS  - 1
SP  - 104932
DO  - 10.1016/j.jece.2020.104932
ER  - 
@article{
author = "Lou, Xiaofei and Wu, Yi-nan and Kabtamu, Daniel Manaye and Matović, Ljiljana and Zhang, Yanxing and Sun, Xianyi and Schott, Eduardo and Chu, Wenhai and Li, Fengting",
year = "2021",
abstract = "Metal-organic frameworks (MOFs), an exciting class of porous crystalline materials, are suitable for adsorptive removal of toxic heavy metal-ethylenediaminetetraacetic acid (M-EDTA) complexes from wastewater. In this paper, water-stable UiO-66(Zr) with well-defined morphology was successfully synthesized through a facile microwave-assisted solvothermal method and employed as nanotraps for the efficient capture of the three M-EDTA complexes, Cu-EDTA, Pb-EDTA, and Ni-EDTA. The adsorption behaviors, effects of solution pH and co-existing anions, as well as the eluant and desorption were investigated. The obtained UiO-66(Zr) showed good stability and excellent uptake capacity of M-EDTA in a wide pH range (3.0-10.0). UiO-66(Zr) exhibited a higher removal efficiency of Cu-EDTA (57.56 mg/g), Pb-EDTA (120.6 mg/g), and Ni-EDTA (54.27 mg/g). Based on the overall analysis results, our findings show that EDTA-metal complex ions can be adsorbed inside UiO-66(Zr) mainly through the Lewis-acid/-base interactions and possible anion-πinteraction with strong binding energies. Size-matching EDTA-metal complexes confined in the UiO-66(Zr) with flexible geometry would also contribute to the fast adsorption kinetics as well as the selective adsorption of different M-EDTA complexes. © 2020 Elsevier Ltd.",
journal = "Journal of Environmental Chemical Engineering",
title = "Exploring UiO-66(Zr) frameworks as nanotraps for highly efficient removal of EDTA-complexed heavy metals from water",
volume = "9",
number = "1",
pages = "104932",
doi = "10.1016/j.jece.2020.104932"
}
Lou, X., Wu, Y., Kabtamu, D. M., Matović, L., Zhang, Y., Sun, X., Schott, E., Chu, W.,& Li, F.. (2021). Exploring UiO-66(Zr) frameworks as nanotraps for highly efficient removal of EDTA-complexed heavy metals from water. in Journal of Environmental Chemical Engineering, 9(1), 104932.
https://doi.org/10.1016/j.jece.2020.104932
Lou X, Wu Y, Kabtamu DM, Matović L, Zhang Y, Sun X, Schott E, Chu W, Li F. Exploring UiO-66(Zr) frameworks as nanotraps for highly efficient removal of EDTA-complexed heavy metals from water. in Journal of Environmental Chemical Engineering. 2021;9(1):104932.
doi:10.1016/j.jece.2020.104932 .
Lou, Xiaofei, Wu, Yi-nan, Kabtamu, Daniel Manaye, Matović, Ljiljana, Zhang, Yanxing, Sun, Xianyi, Schott, Eduardo, Chu, Wenhai, Li, Fengting, "Exploring UiO-66(Zr) frameworks as nanotraps for highly efficient removal of EDTA-complexed heavy metals from water" in Journal of Environmental Chemical Engineering, 9, no. 1 (2021):104932,
https://doi.org/10.1016/j.jece.2020.104932 . .
5
4

Electrochemically synthesized Molybdenum oxides for enhancement of atmospheric pressure non-thermal pulsating corona plasma induced degradation of an organic compound

Petrović, Milica; Rančev, Saša; Prekajski Đorđević, Marija; Najdanović, Slobodan M.; Velinov, Nena D.; Radović Vučić, Miljana; Bojić, Aleksandar Lj

(2021)

TY  - JOUR
AU  - Petrović, Milica
AU  - Rančev, Saša
AU  - Prekajski Đorđević, Marija
AU  - Najdanović, Slobodan M.
AU  - Velinov, Nena D.
AU  - Radović Vučić, Miljana
AU  - Bojić, Aleksandar Lj
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9709
AB  - MoO2 and MoO3 were applied as catalysts for plasma degradation of organic compound. They were prepared by electrodeposition (MoO2) and electrodeposition followed by thermal treatment (MoO3), and then characterized by the cyclic voltammetry, SEM, EDX, XRD, and FTIR. The RB 19 was degraded by self-made non-thermal atmospheric pressure pulsating plasma corona reactor. Decolourization mechanism, parameters, kinetics, and influence of the catalysts were examined. Mo-oxides enhanced degradation reactions rate constants by 45% – 50%, increased decolourization rate at all the tested pHs, discharged current densities, and decreased energy consumption. Degradation followed the pseudo-first kinetics order and proceeded via plasma-generated ⋅OH radical, which attacked dye molecule; MoO2 and MoO3, excited by plasma-generated UV radiation and high-energy chemical species bombardment, enhanced decomposition of plasma-generated H2O2 into ⋅OH radicals, thus enhancing production of degradation agent. Higher percentage of mineralization was attained in the presence of catalysts, which maintained their degradation activity after 5 uses.
T2  - Chemical Engineering Science
T2  - Chemical Engineering ScienceChemical Engineering Science
T1  - Electrochemically synthesized Molybdenum oxides for enhancement of atmospheric pressure non-thermal pulsating corona plasma induced degradation of an organic compound
VL  - 230
SP  - 116209
DO  - 10.1016/j.ces.2020.116209
ER  - 
@article{
author = "Petrović, Milica and Rančev, Saša and Prekajski Đorđević, Marija and Najdanović, Slobodan M. and Velinov, Nena D. and Radović Vučić, Miljana and Bojić, Aleksandar Lj",
year = "2021",
abstract = "MoO2 and MoO3 were applied as catalysts for plasma degradation of organic compound. They were prepared by electrodeposition (MoO2) and electrodeposition followed by thermal treatment (MoO3), and then characterized by the cyclic voltammetry, SEM, EDX, XRD, and FTIR. The RB 19 was degraded by self-made non-thermal atmospheric pressure pulsating plasma corona reactor. Decolourization mechanism, parameters, kinetics, and influence of the catalysts were examined. Mo-oxides enhanced degradation reactions rate constants by 45% – 50%, increased decolourization rate at all the tested pHs, discharged current densities, and decreased energy consumption. Degradation followed the pseudo-first kinetics order and proceeded via plasma-generated ⋅OH radical, which attacked dye molecule; MoO2 and MoO3, excited by plasma-generated UV radiation and high-energy chemical species bombardment, enhanced decomposition of plasma-generated H2O2 into ⋅OH radicals, thus enhancing production of degradation agent. Higher percentage of mineralization was attained in the presence of catalysts, which maintained their degradation activity after 5 uses.",
journal = "Chemical Engineering Science, Chemical Engineering ScienceChemical Engineering Science",
title = "Electrochemically synthesized Molybdenum oxides for enhancement of atmospheric pressure non-thermal pulsating corona plasma induced degradation of an organic compound",
volume = "230",
pages = "116209",
doi = "10.1016/j.ces.2020.116209"
}
Petrović, M., Rančev, S., Prekajski Đorđević, M., Najdanović, S. M., Velinov, N. D., Radović Vučić, M.,& Bojić, A. L.. (2021). Electrochemically synthesized Molybdenum oxides for enhancement of atmospheric pressure non-thermal pulsating corona plasma induced degradation of an organic compound. in Chemical Engineering Science, 230, 116209.
https://doi.org/10.1016/j.ces.2020.116209
Petrović M, Rančev S, Prekajski Đorđević M, Najdanović SM, Velinov ND, Radović Vučić M, Bojić AL. Electrochemically synthesized Molybdenum oxides for enhancement of atmospheric pressure non-thermal pulsating corona plasma induced degradation of an organic compound. in Chemical Engineering Science. 2021;230:116209.
doi:10.1016/j.ces.2020.116209 .
Petrović, Milica, Rančev, Saša, Prekajski Đorđević, Marija, Najdanović, Slobodan M., Velinov, Nena D., Radović Vučić, Miljana, Bojić, Aleksandar Lj, "Electrochemically synthesized Molybdenum oxides for enhancement of atmospheric pressure non-thermal pulsating corona plasma induced degradation of an organic compound" in Chemical Engineering Science, 230 (2021):116209,
https://doi.org/10.1016/j.ces.2020.116209 . .
1
1

Vendor‐independent skin dose mapping application for interventional radiology and cardiology

Krajinović, Marko; Kržanović, Nikola; Ciraj-Bjelac, Olivera

(2021)

TY  - JOUR
AU  - Krajinović, Marko
AU  - Kržanović, Nikola
AU  - Ciraj-Bjelac, Olivera
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9519
AB  - Purpose: The purpose of this paper is to present and validate an originally developed application SkinCare used for skin dose mapping in interventional procedures, which are associated with relatively high radiation doses to the patient’s skin and possible skin reactions. Methods: SkinCare is an application tool for generating skin dose maps following interventional radiology and cardiology procedures using the realistic 3D patient models. Skin dose is calculated using data from Digital Imaging and Communications in Medicine (DICOM) Radiation Dose Structured Reports (RDSRs). SkinCare validation was performed by using the data from the Siemens Artis Zee Biplane fluoroscopy system and conducting “Acceptance and quality control protocols for skin dose calculating software solutions in interventional cardiology” developed and tested in the frame of the VERIDIC project. XR-RV3 Gafchromic films were used as dosimeters to compare peak skin doses (PSDs) and dose maps obtained through measurements and calculations. DICOM RDSRs from four fluoroscopy systems of different vendors (Canon, GE, Philips, and Siemens) were used for the development of the SkinCare and for the comparison of skin dose maps generated using SkinCare to skin dose maps generated by different commercial software tools (Dose Tracking System (DTS) from Canon, RadimetricsTM from Bayer and RDM from MEDSQUARE). The same RDSRs generated during a cardiology clinical procedure (percutaneous coronary intervention—PCI) were used for comparison. Results: Validation performed using VERIDIC's protocols for skin dose calculation software showed that PSD calculated by SkinCare is within 17% and 16% accuracy compared to measurements using XR-RV3 Gafchromic films for fundamental irradiation setups and simplified clinical procedures, respectively. Good visual agreement between dose maps generated by SkinCare and DTS, RadimetricsTM and RDM was obtained. Conclusions: SkinCare is proved to be very convenient solution that can be used for monitoring delivered dose following interventional procedures. © 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.
T2  - Journal of Applied Clinical Medical Physics
T1  - Vendor‐independent skin dose mapping application for interventional radiology and cardiology
VL  - 22
IS  - 2
SP  - 145
EP  - 157
DO  - 10.1002/acm2.13167
ER  - 
@article{
author = "Krajinović, Marko and Kržanović, Nikola and Ciraj-Bjelac, Olivera",
year = "2021",
abstract = "Purpose: The purpose of this paper is to present and validate an originally developed application SkinCare used for skin dose mapping in interventional procedures, which are associated with relatively high radiation doses to the patient’s skin and possible skin reactions. Methods: SkinCare is an application tool for generating skin dose maps following interventional radiology and cardiology procedures using the realistic 3D patient models. Skin dose is calculated using data from Digital Imaging and Communications in Medicine (DICOM) Radiation Dose Structured Reports (RDSRs). SkinCare validation was performed by using the data from the Siemens Artis Zee Biplane fluoroscopy system and conducting “Acceptance and quality control protocols for skin dose calculating software solutions in interventional cardiology” developed and tested in the frame of the VERIDIC project. XR-RV3 Gafchromic films were used as dosimeters to compare peak skin doses (PSDs) and dose maps obtained through measurements and calculations. DICOM RDSRs from four fluoroscopy systems of different vendors (Canon, GE, Philips, and Siemens) were used for the development of the SkinCare and for the comparison of skin dose maps generated using SkinCare to skin dose maps generated by different commercial software tools (Dose Tracking System (DTS) from Canon, RadimetricsTM from Bayer and RDM from MEDSQUARE). The same RDSRs generated during a cardiology clinical procedure (percutaneous coronary intervention—PCI) were used for comparison. Results: Validation performed using VERIDIC's protocols for skin dose calculation software showed that PSD calculated by SkinCare is within 17% and 16% accuracy compared to measurements using XR-RV3 Gafchromic films for fundamental irradiation setups and simplified clinical procedures, respectively. Good visual agreement between dose maps generated by SkinCare and DTS, RadimetricsTM and RDM was obtained. Conclusions: SkinCare is proved to be very convenient solution that can be used for monitoring delivered dose following interventional procedures. © 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.",
journal = "Journal of Applied Clinical Medical Physics",
title = "Vendor‐independent skin dose mapping application for interventional radiology and cardiology",
volume = "22",
number = "2",
pages = "145-157",
doi = "10.1002/acm2.13167"
}
Krajinović, M., Kržanović, N.,& Ciraj-Bjelac, O.. (2021). Vendor‐independent skin dose mapping application for interventional radiology and cardiology. in Journal of Applied Clinical Medical Physics, 22(2), 145-157.
https://doi.org/10.1002/acm2.13167
Krajinović M, Kržanović N, Ciraj-Bjelac O. Vendor‐independent skin dose mapping application for interventional radiology and cardiology. in Journal of Applied Clinical Medical Physics. 2021;22(2):145-157.
doi:10.1002/acm2.13167 .
Krajinović, Marko, Kržanović, Nikola, Ciraj-Bjelac, Olivera, "Vendor‐independent skin dose mapping application for interventional radiology and cardiology" in Journal of Applied Clinical Medical Physics, 22, no. 2 (2021):145-157,
https://doi.org/10.1002/acm2.13167 . .
1
2
1
1

Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project

Kržanović, Nikola; Blideanu, Valentin; Ciraj-Bjelac, Olivera; Plagnard, Johann; Schoonjans, Werner; Živanović, Miloš Z.; Dabin, Jérémie

(2021)

TY  - JOUR
AU  - Kržanović, Nikola
AU  - Blideanu, Valentin
AU  - Ciraj-Bjelac, Olivera
AU  - Plagnard, Johann
AU  - Schoonjans, Werner
AU  - Živanović, Miloš Z.
AU  - Dabin, Jérémie
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9554
AB  - Interventional procedures in radiology and cardiology are associated with high dose to the patient. Accurate dosimetry is essential and calibration of the equipment is a means to provide the necessary accuracy of dose assessment. The objective of this work is to investigate the performance of dosimeters used in interventional procedures in different standard and non-standard X-ray radiation qualities, and to investigate potential uncertainties related to dose measurements, thus improving accuracy of patient dosimetry in interventional procedures. Four new reference radiation qualities dedicated to interventional cardiology applications have been established, allowing calibration of dosimeters used in clinical conditions with appropriate traceability to primary standards. Testing of solid-state semiconductor detectors and thermoluminescent dosimeter properties, e.g. influence of photon energy, angle of incidence and dose rate, was performed in the standard and non-standard radiation qualities. Both dosimeter types showed good performance in the non-standard beams during all performance tests. Solid-state dosimeters displayed weak dependence on energy, angle of incidence and dose rate, in the range defined by the manufacturer and requirements of the international standard. Thermoluminescent dosimeters displayed excellent linearity and angular dependence. The influence of energy dependence on measurement uncertainty can be reduced if appropriate radiation quality is selected for calibration. © 2021 Elsevier Ltd
T2  - Radiation Measurements
T1  - Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project
VL  - 141
SP  - 106515
DO  - 10.1016/j.radmeas.2021.106515
ER  - 
@article{
author = "Kržanović, Nikola and Blideanu, Valentin and Ciraj-Bjelac, Olivera and Plagnard, Johann and Schoonjans, Werner and Živanović, Miloš Z. and Dabin, Jérémie",
year = "2021",
abstract = "Interventional procedures in radiology and cardiology are associated with high dose to the patient. Accurate dosimetry is essential and calibration of the equipment is a means to provide the necessary accuracy of dose assessment. The objective of this work is to investigate the performance of dosimeters used in interventional procedures in different standard and non-standard X-ray radiation qualities, and to investigate potential uncertainties related to dose measurements, thus improving accuracy of patient dosimetry in interventional procedures. Four new reference radiation qualities dedicated to interventional cardiology applications have been established, allowing calibration of dosimeters used in clinical conditions with appropriate traceability to primary standards. Testing of solid-state semiconductor detectors and thermoluminescent dosimeter properties, e.g. influence of photon energy, angle of incidence and dose rate, was performed in the standard and non-standard radiation qualities. Both dosimeter types showed good performance in the non-standard beams during all performance tests. Solid-state dosimeters displayed weak dependence on energy, angle of incidence and dose rate, in the range defined by the manufacturer and requirements of the international standard. Thermoluminescent dosimeters displayed excellent linearity and angular dependence. The influence of energy dependence on measurement uncertainty can be reduced if appropriate radiation quality is selected for calibration. © 2021 Elsevier Ltd",
journal = "Radiation Measurements",
title = "Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project",
volume = "141",
pages = "106515",
doi = "10.1016/j.radmeas.2021.106515"
}
Kržanović, N., Blideanu, V., Ciraj-Bjelac, O., Plagnard, J., Schoonjans, W., Živanović, M. Z.,& Dabin, J.. (2021). Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project. in Radiation Measurements, 141, 106515.
https://doi.org/10.1016/j.radmeas.2021.106515
Kržanović N, Blideanu V, Ciraj-Bjelac O, Plagnard J, Schoonjans W, Živanović MZ, Dabin J. Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project. in Radiation Measurements. 2021;141:106515.
doi:10.1016/j.radmeas.2021.106515 .
Kržanović, Nikola, Blideanu, Valentin, Ciraj-Bjelac, Olivera, Plagnard, Johann, Schoonjans, Werner, Živanović, Miloš Z., Dabin, Jérémie, "Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project" in Radiation Measurements, 141 (2021):106515,
https://doi.org/10.1016/j.radmeas.2021.106515 . .
2
1

Advanced damage resistance monitoring procedure on the composite materials’ surface-exposed to cavitation testing

Vuksanović, Marija M.; Gajić-Kvaščev, Maja; Volkov-Husović, Tatjana; Jančić-Heinemann, Radmila

(2021)

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Gajić-Kvaščev, Maja
AU  - Volkov-Husović, Tatjana
AU  - Jančić-Heinemann, Radmila
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9162
AB  - Morphology and development of surface damage of alumina-based materials, resulting from cavitation erosion is studied in this paper. Two series of samples were prepared: samples without fibers and those with the addition of 2 wt % of ceramic fibers. The form of surface damage is considered to be the information carrier for the analysis of the resistance of materials to cavitation and the quality of this information is determined. The surface of the samples was monitored in defined time intervals in order to prepare the digitized image suitable for further analysis using image analysis software. The principal component analysis was applied to examine the appearance of certain morphological characteristics depending on the behavior of the material during cavitation erosion. It was concluded that the addition of ceramic fibers gained in importance after a long time of cavitation erosion, while during a starting period of time the difference in the morphology of the damage is not very observable. © 2021 Elsevier B.V.
T2  - Wear
T1  - Advanced damage resistance monitoring procedure on the composite materials’ surface-exposed to cavitation testing
VL  - 474-475
SP  - 203877
DO  - 10.1016/j.wear.2021.203877
ER  - 
@article{
author = "Vuksanović, Marija M. and Gajić-Kvaščev, Maja and Volkov-Husović, Tatjana and Jančić-Heinemann, Radmila",
year = "2021",
abstract = "Morphology and development of surface damage of alumina-based materials, resulting from cavitation erosion is studied in this paper. Two series of samples were prepared: samples without fibers and those with the addition of 2 wt % of ceramic fibers. The form of surface damage is considered to be the information carrier for the analysis of the resistance of materials to cavitation and the quality of this information is determined. The surface of the samples was monitored in defined time intervals in order to prepare the digitized image suitable for further analysis using image analysis software. The principal component analysis was applied to examine the appearance of certain morphological characteristics depending on the behavior of the material during cavitation erosion. It was concluded that the addition of ceramic fibers gained in importance after a long time of cavitation erosion, while during a starting period of time the difference in the morphology of the damage is not very observable. © 2021 Elsevier B.V.",
journal = "Wear",
title = "Advanced damage resistance monitoring procedure on the composite materials’ surface-exposed to cavitation testing",
volume = "474-475",
pages = "203877",
doi = "10.1016/j.wear.2021.203877"
}
Vuksanović, M. M., Gajić-Kvaščev, M., Volkov-Husović, T.,& Jančić-Heinemann, R.. (2021). Advanced damage resistance monitoring procedure on the composite materials’ surface-exposed to cavitation testing. in Wear, 474-475, 203877.
https://doi.org/10.1016/j.wear.2021.203877
Vuksanović MM, Gajić-Kvaščev M, Volkov-Husović T, Jančić-Heinemann R. Advanced damage resistance monitoring procedure on the composite materials’ surface-exposed to cavitation testing. in Wear. 2021;474-475:203877.
doi:10.1016/j.wear.2021.203877 .
Vuksanović, Marija M., Gajić-Kvaščev, Maja, Volkov-Husović, Tatjana, Jančić-Heinemann, Radmila, "Advanced damage resistance monitoring procedure on the composite materials’ surface-exposed to cavitation testing" in Wear, 474-475 (2021):203877,
https://doi.org/10.1016/j.wear.2021.203877 . .

Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites

Jelić, Aleksandra; Marinković, Aleksandar D.; Sekulić, Milica; Dikić, Stefan; Ugrinović, Vukašin; Pavlović, Vladimir; Putić, Slaviša

(2021)

TY  - JOUR
AU  - Jelić, Aleksandra
AU  - Marinković, Aleksandar D.
AU  - Sekulić, Milica
AU  - Dikić, Stefan
AU  - Ugrinović, Vukašin
AU  - Pavlović, Vladimir
AU  - Putić, Slaviša
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9562
AB  - In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the epoxy resin matrix to enhance its mechanical properties. The HNT/epoxy nanocomposite materials were prepared by mixing different ratios of untreated/treated HNT with neat epoxy resin. Characterization of untreated/treated HNT was performed by Fourier-transformation infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). The quantity of grafted molecules and thermal stability of newly synthesized materials were determined by thermogravimetric (TG) and derivative thermogravimetric (DTG) analysis. Tensile properties of newly synthesized materials were compared, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis of the fracture surfaces were performed. Incorporation of APTES modified HNT (HNTAPT) and two-step modification APTES followed by DGEBA (HNTAPTDG) has increased the tensile strength of the nanocomposite materials up to 72% and 61%, and strain at break up to 1082% and 1216%, respectively, compared to neat epoxy. It was concluded that the modification of HNT contributed to the enhancement of the dispersion and the cross-linking in the epoxy resin matrix. © 2021 Society of Plastics Engineers
T2  - Polymer Composites
T1  - Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
VL  - 42
IS  - 5
SP  - 2180
EP  - 2192
DO  - 10.1002/pc.25967
ER  - 
@article{
author = "Jelić, Aleksandra and Marinković, Aleksandar D. and Sekulić, Milica and Dikić, Stefan and Ugrinović, Vukašin and Pavlović, Vladimir and Putić, Slaviša",
year = "2021",
abstract = "In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the epoxy resin matrix to enhance its mechanical properties. The HNT/epoxy nanocomposite materials were prepared by mixing different ratios of untreated/treated HNT with neat epoxy resin. Characterization of untreated/treated HNT was performed by Fourier-transformation infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). The quantity of grafted molecules and thermal stability of newly synthesized materials were determined by thermogravimetric (TG) and derivative thermogravimetric (DTG) analysis. Tensile properties of newly synthesized materials were compared, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis of the fracture surfaces were performed. Incorporation of APTES modified HNT (HNTAPT) and two-step modification APTES followed by DGEBA (HNTAPTDG) has increased the tensile strength of the nanocomposite materials up to 72% and 61%, and strain at break up to 1082% and 1216%, respectively, compared to neat epoxy. It was concluded that the modification of HNT contributed to the enhancement of the dispersion and the cross-linking in the epoxy resin matrix. © 2021 Society of Plastics Engineers",
journal = "Polymer Composites",
title = "Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites",
volume = "42",
number = "5",
pages = "2180-2192",
doi = "10.1002/pc.25967"
}
Jelić, A., Marinković, A. D., Sekulić, M., Dikić, S., Ugrinović, V., Pavlović, V.,& Putić, S.. (2021). Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites. in Polymer Composites, 42(5), 2180-2192.
https://doi.org/10.1002/pc.25967
Jelić A, Marinković AD, Sekulić M, Dikić S, Ugrinović V, Pavlović V, Putić S. Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites. in Polymer Composites. 2021;42(5):2180-2192.
doi:10.1002/pc.25967 .
Jelić, Aleksandra, Marinković, Aleksandar D., Sekulić, Milica, Dikić, Stefan, Ugrinović, Vukašin, Pavlović, Vladimir, Putić, Slaviša, "Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites" in Polymer Composites, 42, no. 5 (2021):2180-2192,
https://doi.org/10.1002/pc.25967 . .
1
2
1

Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials

Jelić, Aleksandra; Božić, Aleksandra; Stamenović, Marina; Sekulić, Milica; Porobić, Slavica; Dikić, Stefan; Putić, Slaviša; Mitrović, Nenad; Mladenović, Goran; Mitrović, Aleksandra

(Springer International Publishing, 2021)

TY  - CHAP
AU  - Jelić, Aleksandra
AU  - Božić, Aleksandra
AU  - Stamenović, Marina
AU  - Sekulić, Milica
AU  - Porobić, Slavica
AU  - Dikić, Stefan
AU  - Putić, Slaviša
AU  - Mitrović, Nenad
AU  - Mladenović, Goran
AU  - Mitrović, Aleksandra
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9636
AB  - Halloysite nanotubes (HNTs), naturally occurring as aluminosilicate nanoclay mineral, have recently emerged as a possible nanomaterial for countless applications due to their specific chemical structure, tubular shape, high aspect ratio, biocompatibility and low toxicity. In this study, HNTs were incorporated into the epoxy resin matrix to improve its mechanical properties and thermal stability. However, heterogeneous size, surface charge and surface hydrogen bond formation, result in aggregation of HNTs in epoxies to a certain extent. Three specific techniques were used to integrate HNTs into neat epoxy resin (NE). The structure and morphology of the embedded nanotubes were confirmed by Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Tensile testing was carried out and the fractured surface of the tested specimen was analysed using scanning electron microscopy (SEM). The thermal stability of the prepared nanocomposite materials was investigated by thermogravimetric (TG) and derivative thermogravimetry (DTG) studies. The obtained results indicated that improved properties of HNTs/epoxy nanocomposite materials were related to the unique properties of well-dispersed HNTs, agglomerate scale, and reduced void presence, and could be controlled by the manufacturing processes.
PB  - Springer International Publishing
T2  - Experimental and Computational Investigations in Engineering
T1  - Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials
SP  - 310
EP  - 325
DO  - 10.1007/978-3-030-58362-0_18
ER  - 
@inbook{
author = "Jelić, Aleksandra and Božić, Aleksandra and Stamenović, Marina and Sekulić, Milica and Porobić, Slavica and Dikić, Stefan and Putić, Slaviša and Mitrović, Nenad and Mladenović, Goran and Mitrović, Aleksandra",
year = "2021",
abstract = "Halloysite nanotubes (HNTs), naturally occurring as aluminosilicate nanoclay mineral, have recently emerged as a possible nanomaterial for countless applications due to their specific chemical structure, tubular shape, high aspect ratio, biocompatibility and low toxicity. In this study, HNTs were incorporated into the epoxy resin matrix to improve its mechanical properties and thermal stability. However, heterogeneous size, surface charge and surface hydrogen bond formation, result in aggregation of HNTs in epoxies to a certain extent. Three specific techniques were used to integrate HNTs into neat epoxy resin (NE). The structure and morphology of the embedded nanotubes were confirmed by Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Tensile testing was carried out and the fractured surface of the tested specimen was analysed using scanning electron microscopy (SEM). The thermal stability of the prepared nanocomposite materials was investigated by thermogravimetric (TG) and derivative thermogravimetry (DTG) studies. The obtained results indicated that improved properties of HNTs/epoxy nanocomposite materials were related to the unique properties of well-dispersed HNTs, agglomerate scale, and reduced void presence, and could be controlled by the manufacturing processes.",
publisher = "Springer International Publishing",
journal = "Experimental and Computational Investigations in Engineering",
booktitle = "Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials",
pages = "310-325",
doi = "10.1007/978-3-030-58362-0_18"
}
Jelić, A., Božić, A., Stamenović, M., Sekulić, M., Porobić, S., Dikić, S., Putić, S., Mitrović, N., Mladenović, G.,& Mitrović, A.. (2021). Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials. in Experimental and Computational Investigations in Engineering
Springer International Publishing., 310-325.
https://doi.org/10.1007/978-3-030-58362-0_18
Jelić A, Božić A, Stamenović M, Sekulić M, Porobić S, Dikić S, Putić S, Mitrović N, Mladenović G, Mitrović A. Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials. in Experimental and Computational Investigations in Engineering. 2021;:310-325.
doi:10.1007/978-3-030-58362-0_18 .
Jelić, Aleksandra, Božić, Aleksandra, Stamenović, Marina, Sekulić, Milica, Porobić, Slavica, Dikić, Stefan, Putić, Slaviša, Mitrović, Nenad, Mladenović, Goran, Mitrović, Aleksandra, "Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials" in Experimental and Computational Investigations in Engineering (2021):310-325,
https://doi.org/10.1007/978-3-030-58362-0_18 . .

Ferromagnetism in intermetallic Hf6Co23 alloy

Sewak, R; Dey, C C; Toprek, Dragan

(2021)

TY  - JOUR
AU  - Sewak, R
AU  - Dey, C C
AU  - Toprek, Dragan
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9704
AB  - Ferromagnetism in Hf6Co23 intermetallic alloy at room temperature has been confirmed from perturbed angular correlation measurements using 181Hf probe. The strength of hyperfine magnetic field at room temperature for this intermetallic compound has been found to be Bhf=2.5(2) T while the earlier report of hyperfine magnetic field in Hf6Co23 has discrepancy. The hyperfine magnetic field at Ta impurity site has also been calculated by density functional theory and the result is found to be Bhf=-4.964 T (at 0 K). This value is closer to the present experimental value measured at 298 K. The compound Hf6Co23 has been found to decompose reversibly to Hf2Co7 at 473 K. Ferromagnetism in this material has been found up to 423 K and its Curie temperature is, therefore, set as TC>423 K. From recent measurements by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, electron probe microanalysis and differential scanning calorimetry, Hf6Co23 was reported to be stable in a wide range of temperature and there was no phase existence of Hf2Co7 while the previous reported phase diagram showed a decomposition of Hf6Co23 to Hf2Co7 at a higher temperature. © 2021 Elsevier B.V.
T2  - Journal of Magnetism and Magnetic Materials
T1  - Ferromagnetism in intermetallic Hf6Co23 alloy
VL  - 534
SP  - 168042
DO  - 10.1016/j.jmmm.2021.168042
ER  - 
@article{
author = "Sewak, R and Dey, C C and Toprek, Dragan",
year = "2021",
abstract = "Ferromagnetism in Hf6Co23 intermetallic alloy at room temperature has been confirmed from perturbed angular correlation measurements using 181Hf probe. The strength of hyperfine magnetic field at room temperature for this intermetallic compound has been found to be Bhf=2.5(2) T while the earlier report of hyperfine magnetic field in Hf6Co23 has discrepancy. The hyperfine magnetic field at Ta impurity site has also been calculated by density functional theory and the result is found to be Bhf=-4.964 T (at 0 K). This value is closer to the present experimental value measured at 298 K. The compound Hf6Co23 has been found to decompose reversibly to Hf2Co7 at 473 K. Ferromagnetism in this material has been found up to 423 K and its Curie temperature is, therefore, set as TC>423 K. From recent measurements by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, electron probe microanalysis and differential scanning calorimetry, Hf6Co23 was reported to be stable in a wide range of temperature and there was no phase existence of Hf2Co7 while the previous reported phase diagram showed a decomposition of Hf6Co23 to Hf2Co7 at a higher temperature. © 2021 Elsevier B.V.",
journal = "Journal of Magnetism and Magnetic Materials",
title = "Ferromagnetism in intermetallic Hf6Co23 alloy",
volume = "534",
pages = "168042",
doi = "10.1016/j.jmmm.2021.168042"
}
Sewak, R., Dey, C. C.,& Toprek, D.. (2021). Ferromagnetism in intermetallic Hf6Co23 alloy. in Journal of Magnetism and Magnetic Materials, 534, 168042.
https://doi.org/10.1016/j.jmmm.2021.168042
Sewak R, Dey CC, Toprek D. Ferromagnetism in intermetallic Hf6Co23 alloy. in Journal of Magnetism and Magnetic Materials. 2021;534:168042.
doi:10.1016/j.jmmm.2021.168042 .
Sewak, R, Dey, C C, Toprek, Dragan, "Ferromagnetism in intermetallic Hf6Co23 alloy" in Journal of Magnetism and Magnetic Materials, 534 (2021):168042,
https://doi.org/10.1016/j.jmmm.2021.168042 . .

Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at √s=13Te

Sirunyan, A.; Tumasyan, A.; Adam, W.; Bergauer, T.; Dragicevic, M.; Adzic, P.; Cirkovic, P.; Dordevic, M.; Milenovic, P.; Milosevic, J.

(2021)

TY  - JOUR
AU  - Sirunyan, A.
AU  - Tumasyan, A.
AU  - Adam, W.
AU  - Bergauer, T.
AU  - Dragicevic, M.
AU  - Adzic, P.
AU  - Cirkovic, P.
AU  - Dordevic, M.
AU  - Milenovic, P.
AU  - Milosevic, J.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9703
AB  - The rate for Higgs (H) bosons production in association with either one (t H) or two (t t ¯ H) top quarks is measured in final states containing multiple electrons, muons, or tau leptons decaying to hadrons and a neutrino, using proton–proton collisions recorded at a center-of-mass energy of 13Te by the CMS experiment. The analyzed data correspond to an integrated luminosity of 137fb-1. The analysis is aimed at events that contain H → W W , H → τ τ , or H → Z Z decays and each of the top quark(s) decays either to lepton+jets or all-jet channels. Sensitivity to signal is maximized by including ten signatures in the analysis, depending on the lepton multiplicity. The separation among t H , t t ¯ H , and the backgrounds is enhanced through machine-learning techniques and matrix-element methods. The measured production rates for the t t ¯ H and t H signals correspond to 0.92±0.19(stat)-0.13+0.17(syst) and 5.7±2.7(stat)±3.0(syst) of their respective standard model (SM) expectations. The corresponding observed (expected) significance amounts to 4.7 (5.2) standard deviations for t t ¯ H , and to 1.4 (0.3) for t H production. Assuming that the Higgs boson coupling to the tau lepton is equal in strength to its expectation in the SM, the coupling yt of the Higgs boson to the top quark divided by its SM expectation, κt=yt/ytSM, is constrained to be within - 0.9 < κt< - 0.7 or 0.7 < κt< 1.1 , at 95% confidence level. This result is the most sensitive measurement of the t t ¯ H production rate to date.
T2  - European Physical Journal C
T1  - Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at √s=13Te
VL  - 81
IS  - 4
SP  - 378
DO  - 10.1140/epjc/s10052-021-09014-x
ER  - 
@article{
author = "Sirunyan, A. and Tumasyan, A. and Adam, W. and Bergauer, T. and Dragicevic, M. and Adzic, P. and Cirkovic, P. and Dordevic, M. and Milenovic, P. and Milosevic, J.",
year = "2021",
abstract = "The rate for Higgs (H) bosons production in association with either one (t H) or two (t t ¯ H) top quarks is measured in final states containing multiple electrons, muons, or tau leptons decaying to hadrons and a neutrino, using proton–proton collisions recorded at a center-of-mass energy of 13Te by the CMS experiment. The analyzed data correspond to an integrated luminosity of 137fb-1. The analysis is aimed at events that contain H → W W , H → τ τ , or H → Z Z decays and each of the top quark(s) decays either to lepton+jets or all-jet channels. Sensitivity to signal is maximized by including ten signatures in the analysis, depending on the lepton multiplicity. The separation among t H , t t ¯ H , and the backgrounds is enhanced through machine-learning techniques and matrix-element methods. The measured production rates for the t t ¯ H and t H signals correspond to 0.92±0.19(stat)-0.13+0.17(syst) and 5.7±2.7(stat)±3.0(syst) of their respective standard model (SM) expectations. The corresponding observed (expected) significance amounts to 4.7 (5.2) standard deviations for t t ¯ H , and to 1.4 (0.3) for t H production. Assuming that the Higgs boson coupling to the tau lepton is equal in strength to its expectation in the SM, the coupling yt of the Higgs boson to the top quark divided by its SM expectation, κt=yt/ytSM, is constrained to be within - 0.9 < κt< - 0.7 or 0.7 < κt< 1.1 , at 95% confidence level. This result is the most sensitive measurement of the t t ¯ H production rate to date.",
journal = "European Physical Journal C",
title = "Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at √s=13Te",
volume = "81",
number = "4",
pages = "378",
doi = "10.1140/epjc/s10052-021-09014-x"
}
Sirunyan, A., Tumasyan, A., Adam, W., Bergauer, T., Dragicevic, M., Adzic, P., Cirkovic, P., Dordevic, M., Milenovic, P.,& Milosevic, J.. (2021). Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at √s=13Te. in European Physical Journal C, 81(4), 378.
https://doi.org/10.1140/epjc/s10052-021-09014-x
Sirunyan A, Tumasyan A, Adam W, Bergauer T, Dragicevic M, Adzic P, Cirkovic P, Dordevic M, Milenovic P, Milosevic J. Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at √s=13Te. in European Physical Journal C. 2021;81(4):378.
doi:10.1140/epjc/s10052-021-09014-x .
Sirunyan, A., Tumasyan, A., Adam, W., Bergauer, T., Dragicevic, M., Adzic, P., Cirkovic, P., Dordevic, M., Milenovic, P., Milosevic, J., "Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at √s=13Te" in European Physical Journal C, 81, no. 4 (2021):378,
https://doi.org/10.1140/epjc/s10052-021-09014-x . .
2

Angular analysis of the decay B+ → K∗(892)+ μ + μ − in proton-proton collisions at √s = 8 TeV

Sirunyan, A.; Tumasyan, A.; Adam, W.; Bergauer, T.; Dragicevic, M.; Adžić, Petar; Đorđević, Miloš; Milenović, Predrag; Milošević, Jovan

(2021)

TY  - JOUR
AU  - Sirunyan, A.
AU  - Tumasyan, A.
AU  - Adam, W.
AU  - Bergauer, T.
AU  - Dragicevic, M.
AU  - Adžić, Petar
AU  - Đorđević, Miloš
AU  - Milenović, Predrag
AU  - Milošević, Jovan
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9696
AB  - Angular distributions of the decay B+→ K∗(892)+μ+μ− are studied using events collected with the CMS detector in s = 8 TeV proton-proton collisions at the LHC, corresponding to an integrated luminosity of 20.0 fb−1. The forward-backward asymmetry of the muons and the longitudinal polarization of the K∗(892)+ meson are determined as a function of the square of the dimuon invariant mass. These are the first results from this exclusive decay mode and are in agreement with a standard model prediction.
T2  - Journal of High Energy Physics
T1  - Angular analysis of the decay B+ → K∗(892)+ μ + μ − in proton-proton collisions at √s = 8 TeV
VL  - 2021
IS  - 4
SP  - 124
DO  - 10.1007/JHEP04(2021)124
ER  - 
@article{
author = "Sirunyan, A. and Tumasyan, A. and Adam, W. and Bergauer, T. and Dragicevic, M. and Adžić, Petar and Đorđević, Miloš and Milenović, Predrag and Milošević, Jovan",
year = "2021",
abstract = "Angular distributions of the decay B+→ K∗(892)+μ+μ− are studied using events collected with the CMS detector in s = 8 TeV proton-proton collisions at the LHC, corresponding to an integrated luminosity of 20.0 fb−1. The forward-backward asymmetry of the muons and the longitudinal polarization of the K∗(892)+ meson are determined as a function of the square of the dimuon invariant mass. These are the first results from this exclusive decay mode and are in agreement with a standard model prediction.",
journal = "Journal of High Energy Physics",
title = "Angular analysis of the decay B+ → K∗(892)+ μ + μ − in proton-proton collisions at √s = 8 TeV",
volume = "2021",
number = "4",
pages = "124",
doi = "10.1007/JHEP04(2021)124"
}
Sirunyan, A., Tumasyan, A., Adam, W., Bergauer, T., Dragicevic, M., Adžić, P., Đorđević, M., Milenović, P.,& Milošević, J.. (2021). Angular analysis of the decay B+ → K∗(892)+ μ + μ − in proton-proton collisions at √s = 8 TeV. in Journal of High Energy Physics, 2021(4), 124.
https://doi.org/10.1007/JHEP04(2021)124
Sirunyan A, Tumasyan A, Adam W, Bergauer T, Dragicevic M, Adžić P, Đorđević M, Milenović P, Milošević J. Angular analysis of the decay B+ → K∗(892)+ μ + μ − in proton-proton collisions at √s = 8 TeV. in Journal of High Energy Physics. 2021;2021(4):124.
doi:10.1007/JHEP04(2021)124 .
Sirunyan, A., Tumasyan, A., Adam, W., Bergauer, T., Dragicevic, M., Adžić, Petar, Đorđević, Miloš, Milenović, Predrag, Milošević, Jovan, "Angular analysis of the decay B+ → K∗(892)+ μ + μ − in proton-proton collisions at √s = 8 TeV" in Journal of High Energy Physics, 2021, no. 4 (2021):124,
https://doi.org/10.1007/JHEP04(2021)124 . .
4
1