TY  - CONF
AU  - Mutić, Sanja
AU  - Stanković, Dalibor
AU  - Konya, Z.
AU  - Anojčić, J.
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11962
AB  - Cholesterol as very important biomolecule is the precursor of many biologically significant compounds which give strength and flexibility to the biological membranes. It is also a crucial component in lipoproteins, and has an important role to transport hydrophobic molecules in hydrophilic media such as blood [1, 2]. The analytical performance of carbon paste electrodes (CPE) bulk modified with ionic liquid 1-allyl-3-methylimidazolium dicyanamide ([AMIM][DCA]), and surface modified with platinum on graphitized carbon (Pt-C) or platinum-ruthenium alloy on graphitized carbon (Pt,Ru-C) for analysis of hydrogen peroxide (H 2O2) were compared. The prepared working electrodes were characterized using scanning electron microscopy–energydispersive X-ray spectrometry, together with electrochemical impedance spectroscopic, cyclic voltammetric, and amperometric techniques. After method optimization, an enzyme cholesterol oxidase (ChOx) was immobilized on the surface of Pt,Ru-C/IL-CPE by Nafion®. The improved cholesterol amperometric determination was achieved in phosphate buffer solution pH 7.50 at a working potential of 0.60 V. Under the optimized experimental conditions, a linear relationship between oxidation current and cholesterol concentration was in the concentration range from 0.31 to 2.46 µM, with an estimated detection limit of 0.13 µM and relative standard deviation (RSD) below 4.2%. The optimized amperometric method in combination with the developed ChOx/Pt,Ru-C/IL-CPE biosensor showed good repeatability and high selectivity towards cholesterol biosensing despite the presence of possible interferences. The ChOx/Pt,Ru-C/IL-CPE was tested for the determination of the free cholesterol, by its enzymatic reaction product H 2O2, in a human blood serum sample. The percentage recovery ranged from 99.08 to 102.81%, while RSD was below 2.0% for untreated, as well as for spiked human blood serum sample.
PB  - University of Belgrade : Faculty of Chemistry
C3  - YISAC 2023 : 28th Young Investigators' Seminar on Analytical Chemistry : the book of abstracts
T1  - Amperometric determination of cholesterol using cholesterol oxidase immobilized on Pt,Ru-C nanocomposite and an ionic liquid-modified carbon paste electrode
SP  - 53
EP  - 53
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11962
ER  - 

@conference{
author = "Mutić, Sanja and Stanković, Dalibor and Konya, Z. and Anojčić, J.",
abstract = "Cholesterol as very important biomolecule is the precursor of many biologically significant compounds which give strength and flexibility to the biological membranes. It is also a crucial component in lipoproteins, and has an important role to transport hydrophobic molecules in hydrophilic media such as blood [1, 2]. The analytical performance of carbon paste electrodes (CPE) bulk modified with ionic liquid 1-allyl-3-methylimidazolium dicyanamide ([AMIM][DCA]), and surface modified with platinum on graphitized carbon (Pt-C) or platinum-ruthenium alloy on graphitized carbon (Pt,Ru-C) for analysis of hydrogen peroxide (H 2O2) were compared. The prepared working electrodes were characterized using scanning electron microscopy–energydispersive X-ray spectrometry, together with electrochemical impedance spectroscopic, cyclic voltammetric, and amperometric techniques. After method optimization, an enzyme cholesterol oxidase (ChOx) was immobilized on the surface of Pt,Ru-C/IL-CPE by Nafion®. The improved cholesterol amperometric determination was achieved in phosphate buffer solution pH 7.50 at a working potential of 0.60 V. Under the optimized experimental conditions, a linear relationship between oxidation current and cholesterol concentration was in the concentration range from 0.31 to 2.46 µM, with an estimated detection limit of 0.13 µM and relative standard deviation (RSD) below 4.2%. The optimized amperometric method in combination with the developed ChOx/Pt,Ru-C/IL-CPE biosensor showed good repeatability and high selectivity towards cholesterol biosensing despite the presence of possible interferences. The ChOx/Pt,Ru-C/IL-CPE was tested for the determination of the free cholesterol, by its enzymatic reaction product H 2O2, in a human blood serum sample. The percentage recovery ranged from 99.08 to 102.81%, while RSD was below 2.0% for untreated, as well as for spiked human blood serum sample.",
publisher = "University of Belgrade : Faculty of Chemistry",
journal = "YISAC 2023 : 28th Young Investigators' Seminar on Analytical Chemistry : the book of abstracts",
title = "Amperometric determination of cholesterol using cholesterol oxidase immobilized on Pt,Ru-C nanocomposite and an ionic liquid-modified carbon paste electrode",
pages = "53-53",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11962"
}

Mutić, S., Stanković, D., Konya, Z.,& Anojčić, J..Amperometric determination of cholesterol using cholesterol oxidase immobilized on Pt,Ru-C nanocomposite and an ionic liquid-modified carbon paste electrode. in YISAC 2023 : 28th Young Investigators' Seminar on Analytical Chemistry : the book of abstracts
University of Belgrade : Faculty of Chemistry., 53-53.
https://hdl.handle.net/21.15107/rcub_vinar_11962

Mutić S, Stanković D, Konya Z, Anojčić J. Amperometric determination of cholesterol using cholesterol oxidase immobilized on Pt,Ru-C nanocomposite and an ionic liquid-modified carbon paste electrode. in YISAC 2023 : 28th Young Investigators' Seminar on Analytical Chemistry : the book of abstracts.:53-53.
https://hdl.handle.net/21.15107/rcub_vinar_11962 .

Mutić, Sanja, Stanković, Dalibor, Konya, Z., Anojčić, J., "Amperometric determination of cholesterol using cholesterol oxidase immobilized on Pt,Ru-C nanocomposite and an ionic liquid-modified carbon paste electrode" in YISAC 2023 : 28th Young Investigators' Seminar on Analytical Chemistry : the book of abstracts:53-53,
https://hdl.handle.net/21.15107/rcub_vinar_11962 .

TY  - JOUR
AU  - Trtica, Milan
AU  - Savović, Jelena
AU  - Kuzmanović, M.
AU  - Ranković, D.
AU  - Stašić, Jelena
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12052
AB  - The aspect of the detection of hydrogen isotopes in nuclear materials was analyzed in this review. Particular attention was paid to the spectroscopic methods for the detection of hydrogen isotopes in fusion reactor materials since their presence can induce severe problems in terms of material degradation and shortening of its lifetime. The main focus is on laser-induced breakdown spectroscopy, an optical emission method that is efficient, reliable, and fast. Recent results obtained at the VINCA Institute will also be presented.
T2  - Journal of Applied Spectroscopy
T1  - LIBS Hydrogen Isotopes Detection: Significance in Nuclear/Fusion Technology
VL  - 90
IS  - InPress
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12052
ER  - 

@article{
author = "Trtica, Milan and Savović, Jelena and Kuzmanović, M. and Ranković, D. and Stašić, Jelena",
year = "2024",
abstract = "The aspect of the detection of hydrogen isotopes in nuclear materials was analyzed in this review. Particular attention was paid to the spectroscopic methods for the detection of hydrogen isotopes in fusion reactor materials since their presence can induce severe problems in terms of material degradation and shortening of its lifetime. The main focus is on laser-induced breakdown spectroscopy, an optical emission method that is efficient, reliable, and fast. Recent results obtained at the VINCA Institute will also be presented.",
journal = "Journal of Applied Spectroscopy",
title = "LIBS Hydrogen Isotopes Detection: Significance in Nuclear/Fusion Technology",
volume = "90",
number = "InPress",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12052"
}

Trtica, M., Savović, J., Kuzmanović, M., Ranković, D.,& Stašić, J.. (2024). LIBS Hydrogen Isotopes Detection: Significance in Nuclear/Fusion Technology. in Journal of Applied Spectroscopy, 90(InPress).
https://hdl.handle.net/21.15107/rcub_vinar_12052

Trtica M, Savović J, Kuzmanović M, Ranković D, Stašić J. LIBS Hydrogen Isotopes Detection: Significance in Nuclear/Fusion Technology. in Journal of Applied Spectroscopy. 2024;90(InPress).
https://hdl.handle.net/21.15107/rcub_vinar_12052 .

Trtica, Milan, Savović, Jelena, Kuzmanović, M., Ranković, D., Stašić, Jelena, "LIBS Hydrogen Isotopes Detection: Significance in Nuclear/Fusion Technology" in Journal of Applied Spectroscopy, 90, no. InPress (2024),
https://hdl.handle.net/21.15107/rcub_vinar_12052 .

TY  - JOUR
AU  - Bulat, Tanja
AU  - Zmejkoski, Danica
AU  - Marković, Zoran
AU  - Satzinger, Melissa
AU  - Kovač, Janez
AU  - Strobl, Birgit
AU  - Milivojević, Dušan
AU  - Todorović Marković, Biljana
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11831
AB  - Carbon quantum dots (CQDs) are well known as a promising therapeutic agent due to their excellent pro-oxidant, antioxidant, antibacterial and anticancer properties under visible light irradiation. This material is easy to produce by several bottom-up or top-down methods. In this study, we used citric acid as starting precursor to synthesize aqueous carbon quantum dots dispersion by pyrolysis at 210 ◦C. Atomic force microscopy and XPS analyses revealed that CQDs synthesized are quasi-spherical with typical diameter of 9 nm and lots of C–O and C––O functional groups distributed over the basal plane and edges of the dots. Here, we investigated the antiviral properties of CQDs against cytomegalovirus (CMV). The pre-treatment with CQDs upregulates interferonstimulated genes (ISG), resulting in better virus control. Cellular defence against cytomegalovirus of CQDs pre-treated cells is increased in a dose-dependent manner. Our results reveal high biocompatibility and potent in vitro antiviral properties of CQDs.
T2  - Materials Chemistry and Physics
T1  - Employing carbon quantum dots to combat cytomegalovirus
VL  - 311
SP  - 128495
DO  - 10.1016/j.matchemphys.2023.128495
ER  - 

@article{
author = "Bulat, Tanja and Zmejkoski, Danica and Marković, Zoran and Satzinger, Melissa and Kovač, Janez and Strobl, Birgit and Milivojević, Dušan and Todorović Marković, Biljana",
year = "2024",
abstract = "Carbon quantum dots (CQDs) are well known as a promising therapeutic agent due to their excellent pro-oxidant, antioxidant, antibacterial and anticancer properties under visible light irradiation. This material is easy to produce by several bottom-up or top-down methods. In this study, we used citric acid as starting precursor to synthesize aqueous carbon quantum dots dispersion by pyrolysis at 210 ◦C. Atomic force microscopy and XPS analyses revealed that CQDs synthesized are quasi-spherical with typical diameter of 9 nm and lots of C–O and C––O functional groups distributed over the basal plane and edges of the dots. Here, we investigated the antiviral properties of CQDs against cytomegalovirus (CMV). The pre-treatment with CQDs upregulates interferonstimulated genes (ISG), resulting in better virus control. Cellular defence against cytomegalovirus of CQDs pre-treated cells is increased in a dose-dependent manner. Our results reveal high biocompatibility and potent in vitro antiviral properties of CQDs.",
journal = "Materials Chemistry and Physics",
title = "Employing carbon quantum dots to combat cytomegalovirus",
volume = "311",
pages = "128495",
doi = "10.1016/j.matchemphys.2023.128495"
}

Bulat, T., Zmejkoski, D., Marković, Z., Satzinger, M., Kovač, J., Strobl, B., Milivojević, D.,& Todorović Marković, B.. (2024). Employing carbon quantum dots to combat cytomegalovirus. in Materials Chemistry and Physics, 311, 128495.
https://doi.org/10.1016/j.matchemphys.2023.128495

Bulat T, Zmejkoski D, Marković Z, Satzinger M, Kovač J, Strobl B, Milivojević D, Todorović Marković B. Employing carbon quantum dots to combat cytomegalovirus. in Materials Chemistry and Physics. 2024;311:128495.
doi:10.1016/j.matchemphys.2023.128495 .

Bulat, Tanja, Zmejkoski, Danica, Marković, Zoran, Satzinger, Melissa, Kovač, Janez, Strobl, Birgit, Milivojević, Dušan, Todorović Marković, Biljana, "Employing carbon quantum dots to combat cytomegalovirus" in Materials Chemistry and Physics, 311 (2024):128495,
https://doi.org/10.1016/j.matchemphys.2023.128495 . .

TY  - JOUR
AU  - Piotrowski, Wojciech M.
AU  - Szymczak, Maja
AU  - Rodríguez, Emma Martín
AU  - Marin, Riccardo
AU  - Henklewska, Marta
AU  - Poźniak, Błażej
AU  - Dramićanin, Miroslav
AU  - Marciniak, Lukasz
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11929
AB  - The increasing popularity of luminescent nanothermometry in recent years can be attributed to its application potential in biomedicine. In response to this need, we describe a biocompatible bimodal luminescent thermometer that operates in ratiometric and luminescence lifetime modes based on particles of MgTiO3:Cr3+,Nd3+@SiO2. The introduction of Cr3+ and Nd3+ dopants enabled the luminescence of Ti3+ ions to be observed, and the difference in the thermal quenching rates of Cr3+ (4T2→4A2), Ti3+ (2T2→2E) and Nd3+ (4F3/2 → 4I11/2) ions enabled the ratiometric thermometers. The highest sensitivity reaching SR = 1.00%K−1 was obtained for MgTiO3:0.1 % Cr3+, 0.1 % Nd3+ at 203 K. The shortening of the lifetime of the 4T2 level of Cr3+ ions associated with its thermal depopulation allows to develop a lifetime-based thermometer with a relative sensitivity reaching 0.85–1.18%K−1 in the physiological temperature range. The deposition of a SiO2 shell on a MgTiO3:Cr3+,Nd3+ did not introduce significant changes in the shape of the emission spectrum and slightly elongates the lifetime by reducing the probability of surface-related nonradiative processes. More importantly, the thermometric performance of this luminescence thermometer was preserved. The low cytotoxicity of the obtained materials underlines their potential in bioapplications of the described luminescent thermometers.
T2  - Materials Chemistry and Physics
T1  - Step by step optimization of luminescence thermometry in MgTiO3:Cr3+, Nd3+@SiO2 nanoparticles towards bioapplications
VL  - 312
SP  - 128623
DO  - 10.1016/j.matchemphys.2023.128623
ER  - 

@article{
author = "Piotrowski, Wojciech M. and Szymczak, Maja and Rodríguez, Emma Martín and Marin, Riccardo and Henklewska, Marta and Poźniak, Błażej and Dramićanin, Miroslav and Marciniak, Lukasz",
year = "2024",
abstract = "The increasing popularity of luminescent nanothermometry in recent years can be attributed to its application potential in biomedicine. In response to this need, we describe a biocompatible bimodal luminescent thermometer that operates in ratiometric and luminescence lifetime modes based on particles of MgTiO3:Cr3+,Nd3+@SiO2. The introduction of Cr3+ and Nd3+ dopants enabled the luminescence of Ti3+ ions to be observed, and the difference in the thermal quenching rates of Cr3+ (4T2→4A2), Ti3+ (2T2→2E) and Nd3+ (4F3/2 → 4I11/2) ions enabled the ratiometric thermometers. The highest sensitivity reaching SR = 1.00%K−1 was obtained for MgTiO3:0.1 % Cr3+, 0.1 % Nd3+ at 203 K. The shortening of the lifetime of the 4T2 level of Cr3+ ions associated with its thermal depopulation allows to develop a lifetime-based thermometer with a relative sensitivity reaching 0.85–1.18%K−1 in the physiological temperature range. The deposition of a SiO2 shell on a MgTiO3:Cr3+,Nd3+ did not introduce significant changes in the shape of the emission spectrum and slightly elongates the lifetime by reducing the probability of surface-related nonradiative processes. More importantly, the thermometric performance of this luminescence thermometer was preserved. The low cytotoxicity of the obtained materials underlines their potential in bioapplications of the described luminescent thermometers.",
journal = "Materials Chemistry and Physics",
title = "Step by step optimization of luminescence thermometry in MgTiO3:Cr3+, Nd3+@SiO2 nanoparticles towards bioapplications",
volume = "312",
pages = "128623",
doi = "10.1016/j.matchemphys.2023.128623"
}

Piotrowski, W. M., Szymczak, M., Rodríguez, E. M., Marin, R., Henklewska, M., Poźniak, B., Dramićanin, M.,& Marciniak, L.. (2024). Step by step optimization of luminescence thermometry in MgTiO3:Cr3+, Nd3+@SiO2 nanoparticles towards bioapplications. in Materials Chemistry and Physics, 312, 128623.
https://doi.org/10.1016/j.matchemphys.2023.128623

Piotrowski WM, Szymczak M, Rodríguez EM, Marin R, Henklewska M, Poźniak B, Dramićanin M, Marciniak L. Step by step optimization of luminescence thermometry in MgTiO3:Cr3+, Nd3+@SiO2 nanoparticles towards bioapplications. in Materials Chemistry and Physics. 2024;312:128623.
doi:10.1016/j.matchemphys.2023.128623 .

Piotrowski, Wojciech M., Szymczak, Maja, Rodríguez, Emma Martín, Marin, Riccardo, Henklewska, Marta, Poźniak, Błażej, Dramićanin, Miroslav, Marciniak, Lukasz, "Step by step optimization of luminescence thermometry in MgTiO3:Cr3+, Nd3+@SiO2 nanoparticles towards bioapplications" in Materials Chemistry and Physics, 312 (2024):128623,
https://doi.org/10.1016/j.matchemphys.2023.128623 . .

TY  - JOUR
AU  - Katnić, Đurica B.
AU  - Porobić, Slavica
AU  - Vujčić, Ivica
AU  - Kojić, Marija
AU  - Lazarević-Pašti, Tamara
AU  - Milanković, Vedran
AU  - Marinović-Cincović, Milena
AU  - Živojinović, Dragana Z.
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11863
AB  - Irradiated fig pomace pyrochar (IrrPyrFP) is noteworthy as a novel sterilized low-cost sorbent of BTEX, pesticides, and Pb2+ ions. It was produced by applying pyrolysis treatment followed by gamma irradiation modification in order to obtain a highly efficient and sterile sorbent. The characterization of fig pomace before and after pyrolysis, as well as before and after irradiation of the obtained pyrochar, was done using SEM, FTIR, and elemental analysis, while its sorption ability was tested through the removal of examined pollutants by batch sorption experiments. The obtained results suggest that IrrPyrFP could play a significant role in the control of environmental pollutants, as indicated by the maximum adsorption capacities: 42 mg g−1 for BTEX, 0.625 mg g−1 for malathion, 0.495 mg g−1 for chlorpyrifos and 255 mg g−1 for Pb2+. A kinetic study showed that the removal process by IrrPyrFP mainly follows pseudo 2nd kinetics order, while the sorption equilibriums were estimated using the Langmuir and Freundlich model. Overall, the findings of this work suggest that pyrolysis and activation by irradiation of waste biomass is a promising way to produce sterile efficient sorbents for waste-water treatment based on green chemistry. Additionally, the demonstrated application of fig pomace promotes the potential of using this biomass for continual and economical waste management in the rising fig industry.
T2  - Radiation Physics and Chemistry
T1  - Irradiated fig pomace pyrochar as a promising and sustainable sterilized sorbent for water pollutant removal
VL  - 214
SP  - 111277
DO  - 10.1016/j.radphyschem.2023.111277
ER  - 

@article{
author = "Katnić, Đurica B. and Porobić, Slavica and Vujčić, Ivica and Kojić, Marija and Lazarević-Pašti, Tamara and Milanković, Vedran and Marinović-Cincović, Milena and Živojinović, Dragana Z.",
year = "2024",
abstract = "Irradiated fig pomace pyrochar (IrrPyrFP) is noteworthy as a novel sterilized low-cost sorbent of BTEX, pesticides, and Pb2+ ions. It was produced by applying pyrolysis treatment followed by gamma irradiation modification in order to obtain a highly efficient and sterile sorbent. The characterization of fig pomace before and after pyrolysis, as well as before and after irradiation of the obtained pyrochar, was done using SEM, FTIR, and elemental analysis, while its sorption ability was tested through the removal of examined pollutants by batch sorption experiments. The obtained results suggest that IrrPyrFP could play a significant role in the control of environmental pollutants, as indicated by the maximum adsorption capacities: 42 mg g−1 for BTEX, 0.625 mg g−1 for malathion, 0.495 mg g−1 for chlorpyrifos and 255 mg g−1 for Pb2+. A kinetic study showed that the removal process by IrrPyrFP mainly follows pseudo 2nd kinetics order, while the sorption equilibriums were estimated using the Langmuir and Freundlich model. Overall, the findings of this work suggest that pyrolysis and activation by irradiation of waste biomass is a promising way to produce sterile efficient sorbents for waste-water treatment based on green chemistry. Additionally, the demonstrated application of fig pomace promotes the potential of using this biomass for continual and economical waste management in the rising fig industry.",
journal = "Radiation Physics and Chemistry",
title = "Irradiated fig pomace pyrochar as a promising and sustainable sterilized sorbent for water pollutant removal",
volume = "214",
pages = "111277",
doi = "10.1016/j.radphyschem.2023.111277"
}

Katnić, Đ. B., Porobić, S., Vujčić, I., Kojić, M., Lazarević-Pašti, T., Milanković, V., Marinović-Cincović, M.,& Živojinović, D. Z.. (2024). Irradiated fig pomace pyrochar as a promising and sustainable sterilized sorbent for water pollutant removal. in Radiation Physics and Chemistry, 214, 111277.
https://doi.org/10.1016/j.radphyschem.2023.111277

Katnić ĐB, Porobić S, Vujčić I, Kojić M, Lazarević-Pašti T, Milanković V, Marinović-Cincović M, Živojinović DZ. Irradiated fig pomace pyrochar as a promising and sustainable sterilized sorbent for water pollutant removal. in Radiation Physics and Chemistry. 2024;214:111277.
doi:10.1016/j.radphyschem.2023.111277 .

Katnić, Đurica B., Porobić, Slavica, Vujčić, Ivica, Kojić, Marija, Lazarević-Pašti, Tamara, Milanković, Vedran, Marinović-Cincović, Milena, Živojinović, Dragana Z., "Irradiated fig pomace pyrochar as a promising and sustainable sterilized sorbent for water pollutant removal" in Radiation Physics and Chemistry, 214 (2024):111277,
https://doi.org/10.1016/j.radphyschem.2023.111277 . .

TY  - JOUR
AU  - Ćirić, Aleksandar
AU  - Stojadinović, Stevan
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11828
AB  - Eu3+ doped Zirconia coatings were synthesized by the electrochemical plasma electrolytic oxidation method in only 8 min from the pure zirconium substrate. The phase constitution from pure monoclinic to pure tetragonal and exactly in between was achieved by using different concentrations of Na3PO4 and NaAlO2 electrolytes. The complex emission spectra composed of Eu2+, Eu3+, and ZrO2 defect emission greatly depend on the excitation wavelength and phase constitution. Eu3+ photoluminescence properties depend on the phase, which is reflected by the different Stark splitting and different intensities of transitions. Thus, both phase and photoluminescent properties of ZrO2 coatings are fine-tuneable. Judd-Ofelt analysis was performed from the emission and excitation spectra, showing that all 3 intensity parameters depend linearly on the phase constitution, being largest in the pure monoclinic phase. The mixed phase has Judd-Ofelt parameters between those in pure phases. Eu3+ has 2.45 times more preference to get incorporated into the tetragonal than in the monoclinic phase in the mixed phase samples. The general equation for Judd-Ofelt parameters in a compound with mixed constituents and probability of incorporation is introduced, allowing also for a prediction of the spectrum shape based on the Judd-Ofelt parameters of pure-phase compounds. Python software code for estimating the percent of incorporation by multiple linear regression model is also provided.
T2  - Journal of Luminescence
T1  - Tuning phase and photoluminescent properties of ZrO2:Eu3+ coatings formed by plasma electrolytic oxidation and Judd-Ofelt analysis of composite materials
VL  - 266
SP  - 120268
DO  - 10.1016/j.jlumin.2023.120268
ER  - 

@article{
author = "Ćirić, Aleksandar and Stojadinović, Stevan",
year = "2024",
abstract = "Eu3+ doped Zirconia coatings were synthesized by the electrochemical plasma electrolytic oxidation method in only 8 min from the pure zirconium substrate. The phase constitution from pure monoclinic to pure tetragonal and exactly in between was achieved by using different concentrations of Na3PO4 and NaAlO2 electrolytes. The complex emission spectra composed of Eu2+, Eu3+, and ZrO2 defect emission greatly depend on the excitation wavelength and phase constitution. Eu3+ photoluminescence properties depend on the phase, which is reflected by the different Stark splitting and different intensities of transitions. Thus, both phase and photoluminescent properties of ZrO2 coatings are fine-tuneable. Judd-Ofelt analysis was performed from the emission and excitation spectra, showing that all 3 intensity parameters depend linearly on the phase constitution, being largest in the pure monoclinic phase. The mixed phase has Judd-Ofelt parameters between those in pure phases. Eu3+ has 2.45 times more preference to get incorporated into the tetragonal than in the monoclinic phase in the mixed phase samples. The general equation for Judd-Ofelt parameters in a compound with mixed constituents and probability of incorporation is introduced, allowing also for a prediction of the spectrum shape based on the Judd-Ofelt parameters of pure-phase compounds. Python software code for estimating the percent of incorporation by multiple linear regression model is also provided.",
journal = "Journal of Luminescence",
title = "Tuning phase and photoluminescent properties of ZrO2:Eu3+ coatings formed by plasma electrolytic oxidation and Judd-Ofelt analysis of composite materials",
volume = "266",
pages = "120268",
doi = "10.1016/j.jlumin.2023.120268"
}

Ćirić, A.,& Stojadinović, S.. (2024). Tuning phase and photoluminescent properties of ZrO2:Eu3+ coatings formed by plasma electrolytic oxidation and Judd-Ofelt analysis of composite materials. in Journal of Luminescence, 266, 120268.
https://doi.org/10.1016/j.jlumin.2023.120268

Ćirić A, Stojadinović S. Tuning phase and photoluminescent properties of ZrO2:Eu3+ coatings formed by plasma electrolytic oxidation and Judd-Ofelt analysis of composite materials. in Journal of Luminescence. 2024;266:120268.
doi:10.1016/j.jlumin.2023.120268 .

Ćirić, Aleksandar, Stojadinović, Stevan, "Tuning phase and photoluminescent properties of ZrO2:Eu3+ coatings formed by plasma electrolytic oxidation and Judd-Ofelt analysis of composite materials" in Journal of Luminescence, 266 (2024):120268,
https://doi.org/10.1016/j.jlumin.2023.120268 . .

TY  - JOUR
AU  - Umar, Zafari
AU  - Kurboniyon, Mekhrdod S.
AU  - Khyzhun, Oleg
AU  - Yamamoto, Tomoyuki
AU  - Ma, Chong-Geng
AU  - Brik, Mikhail G.
AU  - Piasecki, Michal
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11826
AB  - We report on the results of the first principles calculations based on density functional theory (DFT) of the electronic structure and mechanical properties of K2LiAlF6, both non-doped and doped with Cr3+ ions. The densities of states of K2LiAlF6 and the K2LiAlF6:Cr3+ phosphor as well as the crystal-field strength 10Dq, the Cr3+ 2E→4A2 emission energy, elastic constants, bulk and shear moduli, sound velocities and Debye temperature as functions of hydrostatic pressure ranging from 0 up to 40 GPa were calculated. The present DFT calculations indicate that, the band gap of non-doped K2LiAlF6 increases quadratically with increasing pressure. Further, the crystal field strength 10Dq and the 2E→4A2 emission energy, the Debye temperature, sound velocities and shear moduli of Cr-doped K2LiAlF6 increase with increasing pressure, while the 2E→4A2 emission energy becomes red-shifted, which indicates potential applicability of the studied system for pressure sensing. Such calculations for the title system were performed for the first time; the obtained results provide a firm basis for a deeper understanding of physical properties of both neat and doped functional materials.
T2  - Journal of Luminescence
T1  - First-principles calculations of the electronic structure and mechanical properties of non-doped and Cr3+-Doped K2LiAlF6 under pressure
VL  - 266
SP  - 120278
DO  - 10.1016/j.jlumin.2023.120278
ER  - 

@article{
author = "Umar, Zafari and Kurboniyon, Mekhrdod S. and Khyzhun, Oleg and Yamamoto, Tomoyuki and Ma, Chong-Geng and Brik, Mikhail G. and Piasecki, Michal",
year = "2024",
abstract = "We report on the results of the first principles calculations based on density functional theory (DFT) of the electronic structure and mechanical properties of K2LiAlF6, both non-doped and doped with Cr3+ ions. The densities of states of K2LiAlF6 and the K2LiAlF6:Cr3+ phosphor as well as the crystal-field strength 10Dq, the Cr3+ 2E→4A2 emission energy, elastic constants, bulk and shear moduli, sound velocities and Debye temperature as functions of hydrostatic pressure ranging from 0 up to 40 GPa were calculated. The present DFT calculations indicate that, the band gap of non-doped K2LiAlF6 increases quadratically with increasing pressure. Further, the crystal field strength 10Dq and the 2E→4A2 emission energy, the Debye temperature, sound velocities and shear moduli of Cr-doped K2LiAlF6 increase with increasing pressure, while the 2E→4A2 emission energy becomes red-shifted, which indicates potential applicability of the studied system for pressure sensing. Such calculations for the title system were performed for the first time; the obtained results provide a firm basis for a deeper understanding of physical properties of both neat and doped functional materials.",
journal = "Journal of Luminescence",
title = "First-principles calculations of the electronic structure and mechanical properties of non-doped and Cr3+-Doped K2LiAlF6 under pressure",
volume = "266",
pages = "120278",
doi = "10.1016/j.jlumin.2023.120278"
}

Umar, Z., Kurboniyon, M. S., Khyzhun, O., Yamamoto, T., Ma, C., Brik, M. G.,& Piasecki, M.. (2024). First-principles calculations of the electronic structure and mechanical properties of non-doped and Cr3+-Doped K2LiAlF6 under pressure. in Journal of Luminescence, 266, 120278.
https://doi.org/10.1016/j.jlumin.2023.120278

Umar Z, Kurboniyon MS, Khyzhun O, Yamamoto T, Ma C, Brik MG, Piasecki M. First-principles calculations of the electronic structure and mechanical properties of non-doped and Cr3+-Doped K2LiAlF6 under pressure. in Journal of Luminescence. 2024;266:120278.
doi:10.1016/j.jlumin.2023.120278 .

Umar, Zafari, Kurboniyon, Mekhrdod S., Khyzhun, Oleg, Yamamoto, Tomoyuki, Ma, Chong-Geng, Brik, Mikhail G., Piasecki, Michal, "First-principles calculations of the electronic structure and mechanical properties of non-doped and Cr3+-Doped K2LiAlF6 under pressure" in Journal of Luminescence, 266 (2024):120278,
https://doi.org/10.1016/j.jlumin.2023.120278 . .

TY  - JOUR
AU  - Alazreg, Asma
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11720
AB  - The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforcedwith MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested bymicrohardness measurements.
T2  - Materials Letters
T1  - Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles
VL  - 354
SP  - 135354
DO  - 10.1016/j.matlet.2023.135354
ER  - 

@article{
author = "Alazreg, Asma and Vuksanović, Marija M. and Mladenović, Ivana O. and Egelja, Adela and Janković-Mandić, Ljiljana and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforcedwith MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested bymicrohardness measurements.",
journal = "Materials Letters",
title = "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles",
volume = "354",
pages = "135354",
doi = "10.1016/j.matlet.2023.135354"
}

Alazreg, A., Vuksanović, M. M., Mladenović, I. O., Egelja, A., Janković-Mandić, L., Marinković, A.,& Jančić-Heinemann, R.. (2024). Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters, 354, 135354.
https://doi.org/10.1016/j.matlet.2023.135354

Alazreg A, Vuksanović MM, Mladenović IO, Egelja A, Janković-Mandić L, Marinković A, Jančić-Heinemann R. Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters. 2024;354:135354.
doi:10.1016/j.matlet.2023.135354 .

Alazreg, Asma, Vuksanović, Marija M., Mladenović, Ivana O., Egelja, Adela, Janković-Mandić, Ljiljana, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles" in Materials Letters, 354 (2024):135354,
https://doi.org/10.1016/j.matlet.2023.135354 . .

TY  - JOUR
AU  - Balvanović, Roman
AU  - Šmit, Žiga
AU  - Stojanović, Milica Marić
AU  - Špehar, Perica
AU  - Milović, Olivera
PY  - 2023-11
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11836
AB  - Thirty-two glasses from four Byzantine fortifications located on the Danube in Serbia, dated to the sixth-century CE, are analysed by PIXE/PIGE, and their compositional types are determined. Most of the glasses belong to Late Antique type Foy 2.1 (22), the rest being Foy 3.2 (3), HIMTa (1), Levantine (2), plant-ash (3), and coloured black (1). The diversity of compositional types and provenances characterizing the same area during the third to fourth century, changed in the sixth century into uniformity of glass types and provenance: more than two-thirds of all glass types represent only one type (Foy 2.1), and at least 87% of all imports came from a single region, Egypt. Apart from two glasses reported herein, no Levantine glasses are reported from Serbia, and almost none from the inner Balkans, which is in contrast with the rest of the Mediterranean excluding Egypt. The reasons for this might be the economic aftermath of earlier Hunnic raids or possible centralization of raw glass imports during the Justinian rebuilding program. Two plant ash glasses of mixed composition, showing characteristics of Egyptian plant-ash flux and Mesopotamian sand, likely represent recycled glass originating from these two regions.
T2  - Archaeological and Anthropological Sciences
T1  - Sixth-century Byzantine glass from Limes Fortifications on Serbian Danube
VL  - 15
IS  - 11
DO  - 10.1007/s12520-023-01872-8
ER  - 

@article{
author = "Balvanović, Roman and Šmit, Žiga and Stojanović, Milica Marić and Špehar, Perica and Milović, Olivera",
year = "2023-11",
abstract = "Thirty-two glasses from four Byzantine fortifications located on the Danube in Serbia, dated to the sixth-century CE, are analysed by PIXE/PIGE, and their compositional types are determined. Most of the glasses belong to Late Antique type Foy 2.1 (22), the rest being Foy 3.2 (3), HIMTa (1), Levantine (2), plant-ash (3), and coloured black (1). The diversity of compositional types and provenances characterizing the same area during the third to fourth century, changed in the sixth century into uniformity of glass types and provenance: more than two-thirds of all glass types represent only one type (Foy 2.1), and at least 87% of all imports came from a single region, Egypt. Apart from two glasses reported herein, no Levantine glasses are reported from Serbia, and almost none from the inner Balkans, which is in contrast with the rest of the Mediterranean excluding Egypt. The reasons for this might be the economic aftermath of earlier Hunnic raids or possible centralization of raw glass imports during the Justinian rebuilding program. Two plant ash glasses of mixed composition, showing characteristics of Egyptian plant-ash flux and Mesopotamian sand, likely represent recycled glass originating from these two regions.",
journal = "Archaeological and Anthropological Sciences",
title = "Sixth-century Byzantine glass from Limes Fortifications on Serbian Danube",
volume = "15",
number = "11",
doi = "10.1007/s12520-023-01872-8"
}

Balvanović, R., Šmit, Ž., Stojanović, M. M., Špehar, P.,& Milović, O.. (2023-11). Sixth-century Byzantine glass from Limes Fortifications on Serbian Danube. in Archaeological and Anthropological Sciences, 15(11).
https://doi.org/10.1007/s12520-023-01872-8

Balvanović R, Šmit Ž, Stojanović MM, Špehar P, Milović O. Sixth-century Byzantine glass from Limes Fortifications on Serbian Danube. in Archaeological and Anthropological Sciences. 2023;15(11).
doi:10.1007/s12520-023-01872-8 .

Balvanović, Roman, Šmit, Žiga, Stojanović, Milica Marić, Špehar, Perica, Milović, Olivera, "Sixth-century Byzantine glass from Limes Fortifications on Serbian Danube" in Archaeological and Anthropological Sciences, 15, no. 11 (2023-11),
https://doi.org/10.1007/s12520-023-01872-8 . .

TY  - JOUR
AU  - Božinović, Nevena
AU  - Savva, Kyriaki
AU  - Rajić, Vladimir
AU  - Popović, Maja
AU  - Tošić, Dragana
AU  - Janjetović, Kristina
AU  - Despotović, Ana
AU  - Zogović, Nevena
AU  - Stratakis, Emmanuel
AU  - Petrović, Suzana
PY  - 2023-10
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11547
AB  - The creation of novel biocompatible Ti-based thin films with a Zr or Cu sub-layer modified by ultrafast laser processing is studied. To prepare bioactive surfaces, ultrafast laser processing is focused on the formation of laser-induced periodic surface structures (LIPSS) with the production of oxide phases at the surfaces. Two differently designed multilayer thin films Ti/Cu/Ti and Ti/Zr/Ti were deposited on the silicon using the ion sputtering method. The Ti thin film contains Cu or Zr sub-layer (thickness of 10 nm) at the 10 nm below the surface. The composition and surface morphology variations for these systems, deposited and laser-processed under the same experimental conditions, were caused only by different thermo-physical properties of the sub-layer (Cu or Zr). The surface morphology in the form of LIPSS, led to improved cell adhesion and stable cells/thin films interface compared to as-deposited samples. Field-emission scanning electron microscopy and MTT analysis revealed that laser processing of both systems increased cell adhesion, proliferation, and metabolical activity of L929 mouse fibroblast cells compared to non-modified flat surfaces. Overall, the biocompatibility of Zrcontaining thin films is better than Ti/Cu/Ti system. Further, laser processing and formation of LIPSS makes Ti/Zr/Ti thin films excellent candidate for biomedical
T2  - Materials Chemistry and Physics
T1  - Influence of zirconium and copper sub-layer in cell integrations on femtosecond laser-processed Ti thin films
VL  - 308
SP  - 128286
DO  - 10.1016/j.matchemphys.2023.128286
ER  - 

@article{
author = "Božinović, Nevena and Savva, Kyriaki and Rajić, Vladimir and Popović, Maja and Tošić, Dragana and Janjetović, Kristina and Despotović, Ana and Zogović, Nevena and Stratakis, Emmanuel and Petrović, Suzana",
year = "2023-10",
abstract = "The creation of novel biocompatible Ti-based thin films with a Zr or Cu sub-layer modified by ultrafast laser processing is studied. To prepare bioactive surfaces, ultrafast laser processing is focused on the formation of laser-induced periodic surface structures (LIPSS) with the production of oxide phases at the surfaces. Two differently designed multilayer thin films Ti/Cu/Ti and Ti/Zr/Ti were deposited on the silicon using the ion sputtering method. The Ti thin film contains Cu or Zr sub-layer (thickness of 10 nm) at the 10 nm below the surface. The composition and surface morphology variations for these systems, deposited and laser-processed under the same experimental conditions, were caused only by different thermo-physical properties of the sub-layer (Cu or Zr). The surface morphology in the form of LIPSS, led to improved cell adhesion and stable cells/thin films interface compared to as-deposited samples. Field-emission scanning electron microscopy and MTT analysis revealed that laser processing of both systems increased cell adhesion, proliferation, and metabolical activity of L929 mouse fibroblast cells compared to non-modified flat surfaces. Overall, the biocompatibility of Zrcontaining thin films is better than Ti/Cu/Ti system. Further, laser processing and formation of LIPSS makes Ti/Zr/Ti thin films excellent candidate for biomedical",
journal = "Materials Chemistry and Physics",
title = "Influence of zirconium and copper sub-layer in cell integrations on femtosecond laser-processed Ti thin films",
volume = "308",
pages = "128286",
doi = "10.1016/j.matchemphys.2023.128286"
}

Božinović, N., Savva, K., Rajić, V., Popović, M., Tošić, D., Janjetović, K., Despotović, A., Zogović, N., Stratakis, E.,& Petrović, S.. (2023-10). Influence of zirconium and copper sub-layer in cell integrations on femtosecond laser-processed Ti thin films. in Materials Chemistry and Physics, 308, 128286.
https://doi.org/10.1016/j.matchemphys.2023.128286

Božinović N, Savva K, Rajić V, Popović M, Tošić D, Janjetović K, Despotović A, Zogović N, Stratakis E, Petrović S. Influence of zirconium and copper sub-layer in cell integrations on femtosecond laser-processed Ti thin films. in Materials Chemistry and Physics. 2023;308:128286.
doi:10.1016/j.matchemphys.2023.128286 .

Božinović, Nevena, Savva, Kyriaki, Rajić, Vladimir, Popović, Maja, Tošić, Dragana, Janjetović, Kristina, Despotović, Ana, Zogović, Nevena, Stratakis, Emmanuel, Petrović, Suzana, "Influence of zirconium and copper sub-layer in cell integrations on femtosecond laser-processed Ti thin films" in Materials Chemistry and Physics, 308 (2023-10):128286,
https://doi.org/10.1016/j.matchemphys.2023.128286 . .

TY  - THES
AU  - Bubić, Maja
PY  - 2023-02-01
UR  - https://eteze.bg.ac.rs/application/showtheses?thesesId=9135
UR  - https://fedorabg.bg.ac.rs/fedora/get/o:29732/bdef:Content/download
UR  - https://plus.cobiss.net/cobiss/sr/sr/bib/113470217
UR  - https://nardus.mpn.gov.rs/handle/123456789/21456
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11989
AB  - Povećana konzumacija fruktoze kroz industrijsku hranu doprinosi razvojumetaboličkog sindroma (MetS). MetS prati hronična inflamacija niskog intenziteta kojojdoprinosi oksidativni stres i aktivacija renin-angiotenzin sistema (RAS). Orasi su bogatizvor antioksidanasa i polinezasićenih n-3 masnih kiselina koje imajuantiinflamatorne/imunomodulatorne efekte na kardiometaboličko zdravlje, čijamolekularna osnova nije dovoljno poznata.Konzumacija oraha (2,4 g/dan, 6 nedelja) je smanjila sistolni krvni pritisak kodpacova na ishrani bogatoj fruktozom (10% rastvor, 15 nedelja), pokazala je protektivniefekat na antioksidativnu osu SIRT1-FoxO3a-MnSOD/katalaza i antiinflamatornikapacitet srca (smanjenje AA/EPA) i promovisala antiinflamatorni profil masnih kiselinau plazmi (smanjenje AA/EPA i AA/DHA), koji su kompromitovani fruktoznomishranom. Ulogu negativnih regulatora antioksidativne ose, Nox4 i ChREBP, u srcu trebadodatno ispitati jer je nivo Nox4 povećan i nakon fruktozne ishrane i nakonsuplementacije orasima, dok je nivo ChREBP u jedru smanjen nakon fruktozne ishrane inakon konzumacije oraha kod kontrolnih pacova. Fruktozna ishrana je aktivirala signalniput koji reguliše inflamaciju povećanjem nivoa transkripcionog faktora NF-κB i ključnogenzima RAS-a, АСЕ, dok je suplementacija orasima kod pacova na fruktoznoj ishranipovećala nivo ACE2, kardioprotektivne komponente RAS-a. Na proteinski/iRNK nivoRAS receptora, AT1R i AT2R, nije uticao nijedan od dva nutritivna faktora.Ova studija je potvrdila korisne efekte konzumacije oraha na kardiometaboličkistatus i predloţila mehanizme koji su u osnovi njihovih antiinflamatornih iantioksidativnih efekata u srcu, ukazujući na mogućnost razvoja novih, nefarmakološkihpristupa u terapiji kardiometaboličkih bolesti.
AB  - Increased fructose intake via industrial food is associated with metabolic syndrome(MetS). MetS is characterized by chronic low-intensity inflammation caused by oxidativestress and activation of the renin-angiotensin system (RAS). Walnuts are a rich source ofantioxidants and polyunsaturated n-3 fatty acids that exert anti-inflammatory/immunomodulatory effects on cardiometabolic health, which molecularbackground is underexplored.Walnut consumption (2.4 g/day, 6 weeks) reduced systolic blood pressure in ratsfed a fructose-rich diet (10% FRD, 15 weeks), showed a protective effect on theantioxidative axis SIRT1-FoxO3a-MnSOD/catalase and anti-inflammatory cardiac capacity(AA/EPA reduction) and promoted the anti-inflammatory profile of plasma fatty acids(AA/EPA and AA/DHA reduction), which were compromised by FRD. The role of theaxis negative regulators, Nox4 and ChREBP, should be further investigated in the heartbecause the Nox4 level was increased by both, FRD and walnut supplementation, whilethe ChREBP nuclear level was reduced in FRD as well as in control rats subjected towalnuts. FRD activated a signaling pathway that regulated inflammation by increasing thelevels of the transcription factor NF-κB and the key RAS enzyme, ACE, while walnutsupplementation in FRD rats increased ACE2 level, a cardioprotective component of theRAS. The protein/mRNA levels of the RAS receptors, AT1R and AT2R, were not affectedby either of the two nutritional factors.This study confirmed the beneficial effects of walnut consumption oncardiometabolic status and proposed the mechanisms underlying their anti-inflammatoryand antioxidative effects in the heart, indicating the possibility for development of novel,non-pharmacological approaches in cardiometabolic disease therapy.
PB  - Универзитет у Београду, Биолошки факултет
T2  - Универзитет у Београду
T1  - Antioksidativni i antiinflamatorni efekti suplementacije orasima (Juglans regia L.) na srce pacova sa metaboličkim sindromom izazvanim ishranom bogatom fruktozom
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11989
ER  - 

@phdthesis{
author = "Bubić, Maja",
year = "2023-02-01",
abstract = "Povećana konzumacija fruktoze kroz industrijsku hranu doprinosi razvojumetaboličkog sindroma (MetS). MetS prati hronična inflamacija niskog intenziteta kojojdoprinosi oksidativni stres i aktivacija renin-angiotenzin sistema (RAS). Orasi su bogatizvor antioksidanasa i polinezasićenih n-3 masnih kiselina koje imajuantiinflamatorne/imunomodulatorne efekte na kardiometaboličko zdravlje, čijamolekularna osnova nije dovoljno poznata.Konzumacija oraha (2,4 g/dan, 6 nedelja) je smanjila sistolni krvni pritisak kodpacova na ishrani bogatoj fruktozom (10% rastvor, 15 nedelja), pokazala je protektivniefekat na antioksidativnu osu SIRT1-FoxO3a-MnSOD/katalaza i antiinflamatornikapacitet srca (smanjenje AA/EPA) i promovisala antiinflamatorni profil masnih kiselinau plazmi (smanjenje AA/EPA i AA/DHA), koji su kompromitovani fruktoznomishranom. Ulogu negativnih regulatora antioksidativne ose, Nox4 i ChREBP, u srcu trebadodatno ispitati jer je nivo Nox4 povećan i nakon fruktozne ishrane i nakonsuplementacije orasima, dok je nivo ChREBP u jedru smanjen nakon fruktozne ishrane inakon konzumacije oraha kod kontrolnih pacova. Fruktozna ishrana je aktivirala signalniput koji reguliše inflamaciju povećanjem nivoa transkripcionog faktora NF-κB i ključnogenzima RAS-a, АСЕ, dok je suplementacija orasima kod pacova na fruktoznoj ishranipovećala nivo ACE2, kardioprotektivne komponente RAS-a. Na proteinski/iRNK nivoRAS receptora, AT1R i AT2R, nije uticao nijedan od dva nutritivna faktora.Ova studija je potvrdila korisne efekte konzumacije oraha na kardiometaboličkistatus i predloţila mehanizme koji su u osnovi njihovih antiinflamatornih iantioksidativnih efekata u srcu, ukazujući na mogućnost razvoja novih, nefarmakološkihpristupa u terapiji kardiometaboličkih bolesti., Increased fructose intake via industrial food is associated with metabolic syndrome(MetS). MetS is characterized by chronic low-intensity inflammation caused by oxidativestress and activation of the renin-angiotensin system (RAS). Walnuts are a rich source ofantioxidants and polyunsaturated n-3 fatty acids that exert anti-inflammatory/immunomodulatory effects on cardiometabolic health, which molecularbackground is underexplored.Walnut consumption (2.4 g/day, 6 weeks) reduced systolic blood pressure in ratsfed a fructose-rich diet (10% FRD, 15 weeks), showed a protective effect on theantioxidative axis SIRT1-FoxO3a-MnSOD/catalase and anti-inflammatory cardiac capacity(AA/EPA reduction) and promoted the anti-inflammatory profile of plasma fatty acids(AA/EPA and AA/DHA reduction), which were compromised by FRD. The role of theaxis negative regulators, Nox4 and ChREBP, should be further investigated in the heartbecause the Nox4 level was increased by both, FRD and walnut supplementation, whilethe ChREBP nuclear level was reduced in FRD as well as in control rats subjected towalnuts. FRD activated a signaling pathway that regulated inflammation by increasing thelevels of the transcription factor NF-κB and the key RAS enzyme, ACE, while walnutsupplementation in FRD rats increased ACE2 level, a cardioprotective component of theRAS. The protein/mRNA levels of the RAS receptors, AT1R and AT2R, were not affectedby either of the two nutritional factors.This study confirmed the beneficial effects of walnut consumption oncardiometabolic status and proposed the mechanisms underlying their anti-inflammatoryand antioxidative effects in the heart, indicating the possibility for development of novel,non-pharmacological approaches in cardiometabolic disease therapy.",
publisher = "Универзитет у Београду, Биолошки факултет",
journal = "Универзитет у Београду",
title = "Antioksidativni i antiinflamatorni efekti suplementacije orasima (Juglans regia L.) na srce pacova sa metaboličkim sindromom izazvanim ishranom bogatom fruktozom",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11989"
}

Bubić, M.. (2023-02-01). Antioksidativni i antiinflamatorni efekti suplementacije orasima (Juglans regia L.) na srce pacova sa metaboličkim sindromom izazvanim ishranom bogatom fruktozom. in Универзитет у Београду
Универзитет у Београду, Биолошки факултет..
https://hdl.handle.net/21.15107/rcub_vinar_11989

Bubić M. Antioksidativni i antiinflamatorni efekti suplementacije orasima (Juglans regia L.) na srce pacova sa metaboličkim sindromom izazvanim ishranom bogatom fruktozom. in Универзитет у Београду. 2023;.
https://hdl.handle.net/21.15107/rcub_vinar_11989 .

Bubić, Maja, "Antioksidativni i antiinflamatorni efekti suplementacije orasima (Juglans regia L.) na srce pacova sa metaboličkim sindromom izazvanim ishranom bogatom fruktozom" in Универзитет у Београду (2023-02-01),
https://hdl.handle.net/21.15107/rcub_vinar_11989 .

TY  - CONF
AU  - Mladenović, Milica R.
AU  - Cvetinović, Dejan B.
AU  - Erić, Aleksandar M.
AU  - Janković, Bojan
AU  - Janković, Marija
AU  - Pijović-Radovanović, Milena
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12102
AB  - Biomass waste recovery is an environmentally friendly method of waste management and sustainable energy production that effectively reduces greenhouse gas emissions and mitigates climate change. As a result, biomass is emerging as a significant source of renewable energy, replacing fossil fuels to power a green and sustainable society and accelerate the development of a circular bio-economy. Thermochemical conversion processes are the most efficient form of biomass utilization for energy production. Gasification of biomass as one of these processes is given special attention in this paper. The concise fundamentals of this process are presented, the types of gasifiers are described and a brief overview of plasma gasification is given with the highlighted advantages and challenges in its application.
PB  - Belgrade : Society of Thermal Engineers of Serbia
C3  - Power Plants 2023 : Elektrane
T1  - Biomass for clean energy solution: biomass gasification
SP  - 922
EP  - 932
ER  - 

@conference{
author = "Mladenović, Milica R. and Cvetinović, Dejan B. and Erić, Aleksandar M. and Janković, Bojan and Janković, Marija and Pijović-Radovanović, Milena",
year = "2023",
abstract = "Biomass waste recovery is an environmentally friendly method of waste management and sustainable energy production that effectively reduces greenhouse gas emissions and mitigates climate change. As a result, biomass is emerging as a significant source of renewable energy, replacing fossil fuels to power a green and sustainable society and accelerate the development of a circular bio-economy. Thermochemical conversion processes are the most efficient form of biomass utilization for energy production. Gasification of biomass as one of these processes is given special attention in this paper. The concise fundamentals of this process are presented, the types of gasifiers are described and a brief overview of plasma gasification is given with the highlighted advantages and challenges in its application.",
publisher = "Belgrade : Society of Thermal Engineers of Serbia",
journal = "Power Plants 2023 : Elektrane",
title = "Biomass for clean energy solution: biomass gasification",
pages = "922-932"
}

Mladenović, M. R., Cvetinović, D. B., Erić, A. M., Janković, B., Janković, M.,& Pijović-Radovanović, M.. (2023). Biomass for clean energy solution: biomass gasification. in Power Plants 2023 : Elektrane
Belgrade : Society of Thermal Engineers of Serbia., 922-932.

Mladenović MR, Cvetinović DB, Erić AM, Janković B, Janković M, Pijović-Radovanović M. Biomass for clean energy solution: biomass gasification. in Power Plants 2023 : Elektrane. 2023;:922-932..

Mladenović, Milica R., Cvetinović, Dejan B., Erić, Aleksandar M., Janković, Bojan, Janković, Marija, Pijović-Radovanović, Milena, "Biomass for clean energy solution: biomass gasification" in Power Plants 2023 : Elektrane (2023):922-932.

TY  - JOUR
AU  - Cvetinović, Dejan
AU  - Milutinović, Nada
AU  - Erić, Aleksandar
AU  - Škobalj, Predrag D.
AU  - Anđelković, Jovana
AU  - Bakić, Vukman
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11352
AB  - This paper proposes a mathematical modelling approach to determine the thermodynamic equilibrium of chemical systems in order to optimise the operating parameters of the plasma chemical processes in a lowtemperature thermal plasma pilot reactor with a direct current electric arc for the treatment of hazardous waste containing polychlorinated biphenyls. The model is primarily based on the principles of mass action and minimum Gibbs free energy. The obtained results can serve as a basis for multi-criteria optimisation based on ecological aspects, reduction of energy consumption and the possibility of using the produced synthetic gas for energy recovery in the process. The analysis carried out clearly showed the advantages of using water vapour as a plasma working medium and the appropriate mixing of the organic waste containing polychlorinated biphenyls with used engine oil for enriched syngas production. The presented analysis determines the optimal reactor temperature for an ecologically efficient treatment and shows possibilities for energy recovery in the process. The proposed model can also be used for other chemical reactors and for the treatment of other chemical substances
T2  - Energy Conversion and Management
T1  - Optimisation of the operating parameters of a thermal plasma system for the conversion of waste containing polychlorinated biphenyls by thermodynamic modelling
VL  - 292
SP  - 117358
DO  - 10.1016/j.enconman.2023.117358
ER  - 

@article{
author = "Cvetinović, Dejan and Milutinović, Nada and Erić, Aleksandar and Škobalj, Predrag D. and Anđelković, Jovana and Bakić, Vukman",
year = "2023",
abstract = "This paper proposes a mathematical modelling approach to determine the thermodynamic equilibrium of chemical systems in order to optimise the operating parameters of the plasma chemical processes in a lowtemperature thermal plasma pilot reactor with a direct current electric arc for the treatment of hazardous waste containing polychlorinated biphenyls. The model is primarily based on the principles of mass action and minimum Gibbs free energy. The obtained results can serve as a basis for multi-criteria optimisation based on ecological aspects, reduction of energy consumption and the possibility of using the produced synthetic gas for energy recovery in the process. The analysis carried out clearly showed the advantages of using water vapour as a plasma working medium and the appropriate mixing of the organic waste containing polychlorinated biphenyls with used engine oil for enriched syngas production. The presented analysis determines the optimal reactor temperature for an ecologically efficient treatment and shows possibilities for energy recovery in the process. The proposed model can also be used for other chemical reactors and for the treatment of other chemical substances",
journal = "Energy Conversion and Management",
title = "Optimisation of the operating parameters of a thermal plasma system for the conversion of waste containing polychlorinated biphenyls by thermodynamic modelling",
volume = "292",
pages = "117358",
doi = "10.1016/j.enconman.2023.117358"
}

Cvetinović, D., Milutinović, N., Erić, A., Škobalj, P. D., Anđelković, J.,& Bakić, V.. (2023). Optimisation of the operating parameters of a thermal plasma system for the conversion of waste containing polychlorinated biphenyls by thermodynamic modelling. in Energy Conversion and Management, 292, 117358.
https://doi.org/10.1016/j.enconman.2023.117358

Cvetinović D, Milutinović N, Erić A, Škobalj PD, Anđelković J, Bakić V. Optimisation of the operating parameters of a thermal plasma system for the conversion of waste containing polychlorinated biphenyls by thermodynamic modelling. in Energy Conversion and Management. 2023;292:117358.
doi:10.1016/j.enconman.2023.117358 .

Cvetinović, Dejan, Milutinović, Nada, Erić, Aleksandar, Škobalj, Predrag D., Anđelković, Jovana, Bakić, Vukman, "Optimisation of the operating parameters of a thermal plasma system for the conversion of waste containing polychlorinated biphenyls by thermodynamic modelling" in Energy Conversion and Management, 292 (2023):117358,
https://doi.org/10.1016/j.enconman.2023.117358 . .

TY  - JOUR
AU  - Jovanović, Marina
AU  - Bakić, Vukman
AU  - Škobalj, Predrag
AU  - Cvetinović, Dejan
AU  - Erić, Aleksandar
AU  - Živković, Nikola V.
AU  - Duić, Neven
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11981
AB  - By ratifying the Paris Agreement, the Republic of Serbia has committed to reduce greenhouse gas emissions by 13.2% by 2030 compared to the 2010 levels. About 70% of electricity is generated in thermal power plants that use low-quality domestic lignite as fuel. Greenhouse gas emissions from electricity generation amounted to 51.5 Mt CO2eq in 2014. The Republic of Serbia has a significant renewable energy source (RES) potential for electricity generation. This research aims to define sustainable scenarios for the years 2030 and 2050 in the transition process of the electricity generation sector in the Republic of Serbia. These scenarios provide an opportunity to gradually reduce CO2 emissions by 2050, with the goal of zero-emission electricity generation in 2050. The scenarios were created using the hourly electricity balance of the Serbian power system in the EnergyPLAN software, with 2010 as the base year for the calculations. The proposed scenarios promote the sustainable use of RES for electricity generation in the Republic of Serbia. The results show a reduction in CO2 emissions of 35% and 59% in 2030 for the scenarios and 66% and 100% in 2050 compared to the reference year 2010.
T2  - Utilities Policy
T1  - Scenarios for transitioning the electricity sector of the Republic of Serbia to sustainable climate neutrality by 2050
VL  - 85
SP  - 101681
DO  - 10.1016/j.jup.2023.101681
ER  - 

@article{
author = "Jovanović, Marina and Bakić, Vukman and Škobalj, Predrag and Cvetinović, Dejan and Erić, Aleksandar and Živković, Nikola V. and Duić, Neven",
year = "2023",
abstract = "By ratifying the Paris Agreement, the Republic of Serbia has committed to reduce greenhouse gas emissions by 13.2% by 2030 compared to the 2010 levels. About 70% of electricity is generated in thermal power plants that use low-quality domestic lignite as fuel. Greenhouse gas emissions from electricity generation amounted to 51.5 Mt CO2eq in 2014. The Republic of Serbia has a significant renewable energy source (RES) potential for electricity generation. This research aims to define sustainable scenarios for the years 2030 and 2050 in the transition process of the electricity generation sector in the Republic of Serbia. These scenarios provide an opportunity to gradually reduce CO2 emissions by 2050, with the goal of zero-emission electricity generation in 2050. The scenarios were created using the hourly electricity balance of the Serbian power system in the EnergyPLAN software, with 2010 as the base year for the calculations. The proposed scenarios promote the sustainable use of RES for electricity generation in the Republic of Serbia. The results show a reduction in CO2 emissions of 35% and 59% in 2030 for the scenarios and 66% and 100% in 2050 compared to the reference year 2010.",
journal = "Utilities Policy",
title = "Scenarios for transitioning the electricity sector of the Republic of Serbia to sustainable climate neutrality by 2050",
volume = "85",
pages = "101681",
doi = "10.1016/j.jup.2023.101681"
}

Jovanović, M., Bakić, V., Škobalj, P., Cvetinović, D., Erić, A., Živković, N. V.,& Duić, N.. (2023). Scenarios for transitioning the electricity sector of the Republic of Serbia to sustainable climate neutrality by 2050. in Utilities Policy, 85, 101681.
https://doi.org/10.1016/j.jup.2023.101681

Jovanović M, Bakić V, Škobalj P, Cvetinović D, Erić A, Živković NV, Duić N. Scenarios for transitioning the electricity sector of the Republic of Serbia to sustainable climate neutrality by 2050. in Utilities Policy. 2023;85:101681.
doi:10.1016/j.jup.2023.101681 .

Jovanović, Marina, Bakić, Vukman, Škobalj, Predrag, Cvetinović, Dejan, Erić, Aleksandar, Živković, Nikola V., Duić, Neven, "Scenarios for transitioning the electricity sector of the Republic of Serbia to sustainable climate neutrality by 2050" in Utilities Policy, 85 (2023):101681,
https://doi.org/10.1016/j.jup.2023.101681 . .

TY  - JOUR
AU  - Đorđević, Jelena
AU  - Lazarević, Nataša
AU  - Zdjelarević, Nevena
AU  - Arbutina, Dalibor
AU  - Forkapić, Sofija
AU  - Janković, Marija
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12101
AB  - The main purpose of this paper was to determine tritium concentration in surface water samples, using liquid scintillation counting. Surface water samples were collected from the Mlaka creek on three different locations near PC „Nuclear Facilities of Serbia“. The importance of tritium monitoring around nuclear reactors and nuclear waste storages is due to prevention of possible internal exposure through ingestion of drinking waters with elevated levels of tritium from existing water supply in their nearby. Tritium concentrations that have been measured during the period from 2017 to 2022 ranged from less than 2 Bq/L to 103 Bq/L.
AB  - Glavni cilj ovog rada bio je da se utvrdi koncentracija tricijuma u uzorcima površinske vode. Korišćena metoda bila je tečna scintilaciona spektrometrija. Uzorci površinske vode uzeti su iz potoka Mlaka na tri različite lokacije u blizini JP „Nuklearni objekti Srbije“. Značaj monitoringa tricijuma oko nuklearnih reaktora i skladišta nuklearnog otpada je sprečavanje unutrašnjeg izlaganja unošenjenjem vode za piće sa povišenim nivoom tricijuma iz postojećih izvora vodosnabdevanja u njihovoj blizini. Koncentracije tricijuma koje su izmerene u periodu od 2017. do 2022. godine kretale su se od manje od 2 Bq/L do 103 Bq/L.
T2  - Scientific Technical Review
T1  - Determination of Tritium Concentration in Mlaka Creek
T1  - Određivanje koncentracije tricijuma u potoku Mlaka
VL  - 73
IS  - 1
SP  - 38
SP  - 41
DO  - 10.1016/j.tet.2020.131456
DO  - 10.5937/str2301038D
ER  - 

@article{
author = "Đorđević, Jelena and Lazarević, Nataša and Zdjelarević, Nevena and Arbutina, Dalibor and Forkapić, Sofija and Janković, Marija",
year = "2023",
abstract = "The main purpose of this paper was to determine tritium concentration in surface water samples, using liquid scintillation counting. Surface water samples were collected from the Mlaka creek on three different locations near PC „Nuclear Facilities of Serbia“. The importance of tritium monitoring around nuclear reactors and nuclear waste storages is due to prevention of possible internal exposure through ingestion of drinking waters with elevated levels of tritium from existing water supply in their nearby. Tritium concentrations that have been measured during the period from 2017 to 2022 ranged from less than 2 Bq/L to 103 Bq/L., Glavni cilj ovog rada bio je da se utvrdi koncentracija tricijuma u uzorcima površinske vode. Korišćena metoda bila je tečna scintilaciona spektrometrija. Uzorci površinske vode uzeti su iz potoka Mlaka na tri različite lokacije u blizini JP „Nuklearni objekti Srbije“. Značaj monitoringa tricijuma oko nuklearnih reaktora i skladišta nuklearnog otpada je sprečavanje unutrašnjeg izlaganja unošenjenjem vode za piće sa povišenim nivoom tricijuma iz postojećih izvora vodosnabdevanja u njihovoj blizini. Koncentracije tricijuma koje su izmerene u periodu od 2017. do 2022. godine kretale su se od manje od 2 Bq/L do 103 Bq/L.",
journal = "Scientific Technical Review",
title = "Determination of Tritium Concentration in Mlaka Creek, Određivanje koncentracije tricijuma u potoku Mlaka",
volume = "73",
number = "1",
pages = "38-41",
doi = "10.1016/j.tet.2020.131456, 10.5937/str2301038D"
}

Đorđević, J., Lazarević, N., Zdjelarević, N., Arbutina, D., Forkapić, S.,& Janković, M.. (2023). Determination of Tritium Concentration in Mlaka Creek. in Scientific Technical Review, 73(1), 38.
https://doi.org/10.1016/j.tet.2020.131456

Đorđević J, Lazarević N, Zdjelarević N, Arbutina D, Forkapić S, Janković M. Determination of Tritium Concentration in Mlaka Creek. in Scientific Technical Review. 2023;73(1):38.
doi:10.1016/j.tet.2020.131456 .

Đorđević, Jelena, Lazarević, Nataša, Zdjelarević, Nevena, Arbutina, Dalibor, Forkapić, Sofija, Janković, Marija, "Determination of Tritium Concentration in Mlaka Creek" in Scientific Technical Review, 73, no. 1 (2023):38,
https://doi.org/10.1016/j.tet.2020.131456 . .

TY  - JOUR
AU  - Jelić, Ivana
AU  - Savić, Aleksandar
AU  - Miljojčić, Tatjana
AU  - Šljivić-Ivanović, Marija
AU  - Dimović, Slavko
AU  - Janković, Marija
AU  - Perović, Ivana
AU  - Zakić, Dimitrije
AU  - Antonijević, Dragi
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12100
AB  - The development of energy-efficient and low-carbon geopolymer-based paving blocks made from waste, as an environmental-friendly material, was evaluated. Ground concrete (GC) and solid brick (SB) powder, as the representatives of construction and demolition waste (C&DW), with the addition of fly ash (FA) and silica fume (SF), were used. Waste samples were characterized in terms of surface functional groups and radioactivity. The FT-IR spectra showed the required amorphous or semi-crystalline alumino-silicate structure. The gamma spectrometry confirmed waste samples' radiological safety. Hardened geopolymer samples were subjected to physical-mechanical investigation comprising of density, water content, compressive and flexural strengths determination. Based on strength characteristics, the three best prototype mixtures were selected and subjected to further compressive strength determination and durability assessment. Prototype sample SBFASFp1, with a compressive strength of 18.7 MPa, was shown the highest value of all samples, almost the same as the corresponding SBFASF1 sample. Freeze-thaw and the subsequent carbonation tests, as durability indicators, showed that the SBFASF1 sample had the slightest strength decrease, making it most durable in these conditions. These satisfactory test results showed the favorable effects of alternatives to cementitious materials, encouraging their utilization and contributing to the sustainability of the construction sector.
T2  - Science of Sintering
T1  - Development of low carbon and energy-efficient geopolymer-based paving blocks
IS  - InPress
SP  - 59
DO  - 10.2298/SOS231009059J
ER  - 

@article{
author = "Jelić, Ivana and Savić, Aleksandar and Miljojčić, Tatjana and Šljivić-Ivanović, Marija and Dimović, Slavko and Janković, Marija and Perović, Ivana and Zakić, Dimitrije and Antonijević, Dragi",
year = "2023",
abstract = "The development of energy-efficient and low-carbon geopolymer-based paving blocks made from waste, as an environmental-friendly material, was evaluated. Ground concrete (GC) and solid brick (SB) powder, as the representatives of construction and demolition waste (C&DW), with the addition of fly ash (FA) and silica fume (SF), were used. Waste samples were characterized in terms of surface functional groups and radioactivity. The FT-IR spectra showed the required amorphous or semi-crystalline alumino-silicate structure. The gamma spectrometry confirmed waste samples' radiological safety. Hardened geopolymer samples were subjected to physical-mechanical investigation comprising of density, water content, compressive and flexural strengths determination. Based on strength characteristics, the three best prototype mixtures were selected and subjected to further compressive strength determination and durability assessment. Prototype sample SBFASFp1, with a compressive strength of 18.7 MPa, was shown the highest value of all samples, almost the same as the corresponding SBFASF1 sample. Freeze-thaw and the subsequent carbonation tests, as durability indicators, showed that the SBFASF1 sample had the slightest strength decrease, making it most durable in these conditions. These satisfactory test results showed the favorable effects of alternatives to cementitious materials, encouraging their utilization and contributing to the sustainability of the construction sector.",
journal = "Science of Sintering",
title = "Development of low carbon and energy-efficient geopolymer-based paving blocks",
number = "InPress",
pages = "59",
doi = "10.2298/SOS231009059J"
}

Jelić, I., Savić, A., Miljojčić, T., Šljivić-Ivanović, M., Dimović, S., Janković, M., Perović, I., Zakić, D.,& Antonijević, D.. (2023). Development of low carbon and energy-efficient geopolymer-based paving blocks. in Science of Sintering(InPress), 59.
https://doi.org/10.2298/SOS231009059J

Jelić I, Savić A, Miljojčić T, Šljivić-Ivanović M, Dimović S, Janković M, Perović I, Zakić D, Antonijević D. Development of low carbon and energy-efficient geopolymer-based paving blocks. in Science of Sintering. 2023;(InPress):59.
doi:10.2298/SOS231009059J .

Jelić, Ivana, Savić, Aleksandar, Miljojčić, Tatjana, Šljivić-Ivanović, Marija, Dimović, Slavko, Janković, Marija, Perović, Ivana, Zakić, Dimitrije, Antonijević, Dragi, "Development of low carbon and energy-efficient geopolymer-based paving blocks" in Science of Sintering, no. InPress (2023):59,
https://doi.org/10.2298/SOS231009059J . .

TY  - JOUR
AU  - Anikin, A.A.
AU  - Salnikov, V.
AU  - Pshenichnikov, S.
AU  - Belyaev, V.K.
AU  - Jovanović, Sonja
AU  - Gurevich, A.
AU  - Levada, E.
AU  - Rodionova, V.
AU  - Panina, L.V.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12099
AB  - Nanoparticles represent a class of highly adaptable nanostructures with a remarkable surface-to-volume ratio, allowing for the precise tuning of their shape to influence their properties. Moreover, their surfaces can be functionalized with organic or inorganic materials, thereby tailoring their performance and introducing specific functionalities. Iron oxide nanoparticles including Fe3O4 and spinel Co ferrites emerge as promising candidates for medical applications due to their notable biocompatibility and appropriate magnetic properties. Their potential in cancer therapy primarily hinges on localized cancer cell heating, which can be remotely triggered by an external AC magnetic field (magnetic hyperthermia). Additional heating induced by light excitation can reduce the required particle dosages during such treatments. The optical characteristics of iron oxide nanoparticles within the wavelength range of biological transparency open up exciting prospects for utilizing these structures in adjuvant thermal therapies. In this study, we demonstrate the results of synthesis and study of magnetic and optical properties of iron oxide nanoparticles coated with organic materials. Notably, CoFe2O4 nanoparticles coated with dihydrocaffeic acid demonstrated the coefficient of heat efficiency conversion close to 100 % under 810 nm laser excitation. They also demonstrated the magnetization curves characterized by minimal hysteresis and remanent magnetization typical of superparamagnetic behavior of iron oxide nanoparticles. This suggests their potential for combined magnetic and optical hyperthermia.
T2  - Journal of Magnetism and Magnetic Materials
T1  - Magnetic, optical and photothermal properties of Fe3O4 and CoFe2O4 nanoparticles coated with organic materials
SP  - 171507
DO  - 10.1016/j.jmmm.2023.171507
ER  - 

@article{
author = "Anikin, A.A. and Salnikov, V. and Pshenichnikov, S. and Belyaev, V.K. and Jovanović, Sonja and Gurevich, A. and Levada, E. and Rodionova, V. and Panina, L.V.",
year = "2023",
abstract = "Nanoparticles represent a class of highly adaptable nanostructures with a remarkable surface-to-volume ratio, allowing for the precise tuning of their shape to influence their properties. Moreover, their surfaces can be functionalized with organic or inorganic materials, thereby tailoring their performance and introducing specific functionalities. Iron oxide nanoparticles including Fe3O4 and spinel Co ferrites emerge as promising candidates for medical applications due to their notable biocompatibility and appropriate magnetic properties. Their potential in cancer therapy primarily hinges on localized cancer cell heating, which can be remotely triggered by an external AC magnetic field (magnetic hyperthermia). Additional heating induced by light excitation can reduce the required particle dosages during such treatments. The optical characteristics of iron oxide nanoparticles within the wavelength range of biological transparency open up exciting prospects for utilizing these structures in adjuvant thermal therapies. In this study, we demonstrate the results of synthesis and study of magnetic and optical properties of iron oxide nanoparticles coated with organic materials. Notably, CoFe2O4 nanoparticles coated with dihydrocaffeic acid demonstrated the coefficient of heat efficiency conversion close to 100 % under 810 nm laser excitation. They also demonstrated the magnetization curves characterized by minimal hysteresis and remanent magnetization typical of superparamagnetic behavior of iron oxide nanoparticles. This suggests their potential for combined magnetic and optical hyperthermia.",
journal = "Journal of Magnetism and Magnetic Materials",
title = "Magnetic, optical and photothermal properties of Fe3O4 and CoFe2O4 nanoparticles coated with organic materials",
pages = "171507",
doi = "10.1016/j.jmmm.2023.171507"
}

Anikin, A.A., Salnikov, V., Pshenichnikov, S., Belyaev, V.K., Jovanović, S., Gurevich, A., Levada, E., Rodionova, V.,& Panina, L.V.. (2023). Magnetic, optical and photothermal properties of Fe3O4 and CoFe2O4 nanoparticles coated with organic materials. in Journal of Magnetism and Magnetic Materials, 171507.
https://doi.org/10.1016/j.jmmm.2023.171507

Anikin A, Salnikov V, Pshenichnikov S, Belyaev V, Jovanović S, Gurevich A, Levada E, Rodionova V, Panina L. Magnetic, optical and photothermal properties of Fe3O4 and CoFe2O4 nanoparticles coated with organic materials. in Journal of Magnetism and Magnetic Materials. 2023;:171507.
doi:10.1016/j.jmmm.2023.171507 .

Anikin, A.A., Salnikov, V., Pshenichnikov, S., Belyaev, V.K., Jovanović, Sonja, Gurevich, A., Levada, E., Rodionova, V., Panina, L.V., "Magnetic, optical and photothermal properties of Fe3O4 and CoFe2O4 nanoparticles coated with organic materials" in Journal of Magnetism and Magnetic Materials (2023):171507,
https://doi.org/10.1016/j.jmmm.2023.171507 . .

TY  - CONF
AU  - Ružić, Jovana
AU  - Simić, Miloš
AU  - Božić, Dušan
AU  - Stoimenov, Nikolay
AU  - Goshev, Stanislav
AU  - Stašić, Jelena
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12098
AB  - Copper-zirconium alloys with the minor addition of boron were manufactured using powder metallurgy, combining mechanical alloying, hot pressing, and sintering. The influence of boron on the mechanical properties of the Cu-Zr alloys was studied on Cu-1Zr (wt.%) and Cu-1.1Zr-0.3B (wt.%) systems. Scanning electron microscopy (SEM), laser nanoparticle sizer, computed tomography, and X-ray diffraction were employed for the observation of morphological and structural changes in the copper microstructure during manufacturing, as well as the development of CuZr phase and ZrB2 particles. Based on SEM and X-ray diffraction analysis, it can be seen that finely dispersed reinforcing ZrB2 particles in copper matrix occur only after the hot pressing process, and not during mechanical alloying. Mechanical properties of the copper-zirconium alloys were investigated using nanoindentation and microhardness tests. It was shown that the presence of a small boron amount, less than 3 wt.%, increases dislocation density in Cu-Zr-B powder mixture with increasing the duration of mechanical alloying. Moreover, analysis of the obtained results reviled that the addition of boron induces a higher hardening effect in Cu-Zr-B alloy compared to CuZr alloy, which results in more stable hardness values during thermomechanical treatment.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
C3  - MME SEE : 5th Metallurgical & Materials Engineering Congress of South-East Europe, June 7-10, 2023; Trebinje, Bosnia and Herzegovina
T1  - Study of the changes in mechanical properties of the copper-zirconium alloys influenced by minor boron addition
SP  - 30
EP  - 30
ER  - 

@conference{
author = "Ružić, Jovana and Simić, Miloš and Božić, Dušan and Stoimenov, Nikolay and Goshev, Stanislav and Stašić, Jelena",
year = "2023",
abstract = "Copper-zirconium alloys with the minor addition of boron were manufactured using powder metallurgy, combining mechanical alloying, hot pressing, and sintering. The influence of boron on the mechanical properties of the Cu-Zr alloys was studied on Cu-1Zr (wt.%) and Cu-1.1Zr-0.3B (wt.%) systems. Scanning electron microscopy (SEM), laser nanoparticle sizer, computed tomography, and X-ray diffraction were employed for the observation of morphological and structural changes in the copper microstructure during manufacturing, as well as the development of CuZr phase and ZrB2 particles. Based on SEM and X-ray diffraction analysis, it can be seen that finely dispersed reinforcing ZrB2 particles in copper matrix occur only after the hot pressing process, and not during mechanical alloying. Mechanical properties of the copper-zirconium alloys were investigated using nanoindentation and microhardness tests. It was shown that the presence of a small boron amount, less than 3 wt.%, increases dislocation density in Cu-Zr-B powder mixture with increasing the duration of mechanical alloying. Moreover, analysis of the obtained results reviled that the addition of boron induces a higher hardening effect in Cu-Zr-B alloy compared to CuZr alloy, which results in more stable hardness values during thermomechanical treatment.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)",
journal = "MME SEE : 5th Metallurgical & Materials Engineering Congress of South-East Europe, June 7-10, 2023; Trebinje, Bosnia and Herzegovina",
title = "Study of the changes in mechanical properties of the copper-zirconium alloys influenced by minor boron addition",
pages = "30-30"
}

Ružić, J., Simić, M., Božić, D., Stoimenov, N., Goshev, S.,& Stašić, J.. (2023). Study of the changes in mechanical properties of the copper-zirconium alloys influenced by minor boron addition. in MME SEE : 5th Metallurgical & Materials Engineering Congress of South-East Europe, June 7-10, 2023; Trebinje, Bosnia and Herzegovina
Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 30-30.

Ružić J, Simić M, Božić D, Stoimenov N, Goshev S, Stašić J. Study of the changes in mechanical properties of the copper-zirconium alloys influenced by minor boron addition. in MME SEE : 5th Metallurgical & Materials Engineering Congress of South-East Europe, June 7-10, 2023; Trebinje, Bosnia and Herzegovina. 2023;:30-30..

Ružić, Jovana, Simić, Miloš, Božić, Dušan, Stoimenov, Nikolay, Goshev, Stanislav, Stašić, Jelena, "Study of the changes in mechanical properties of the copper-zirconium alloys influenced by minor boron addition" in MME SEE : 5th Metallurgical & Materials Engineering Congress of South-East Europe, June 7-10, 2023; Trebinje, Bosnia and Herzegovina (2023):30-30.

TY  - JOUR
AU  - Simić, Marko
AU  - Ružić, Jovana
AU  - Božić, Dušan
AU  - Stoimenov, Nikolay
AU  - Gyoshev, Stanislav D.
AU  - Karastoyanov, Dimitar N.
AU  - Stašić, Jelena
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11393
AB  - Copper-zirconium alloys with high conductivity were produced using powder metallurgy. Two-steps manufacturing process, containing mechanical alloying followed by hot pressing, was applied in achieving improved mechanical and physical properties of Cu-Zr alloy. In this paper, the influence of boron on Cu-Zr alloys properties was studied on Cu-1Zr (wt.%) and Cu-1.1Zr-0.3B (wt.%) systems. Scanning electron microscopy, laser nanoparticle sizer, computed tomography and X-ray diffraction were employed for observation of changes in the microstructure during production steps. More specifically – variations in size of the Cu particles, powder mixtures’ structural parameters, and development of CuZr phase in binary alloy, CuZr phase and ZrB2 particles in ternary alloy were observed. It was shown that presence of boron increases dislocation density in ternary alloy over the mechanical alloying time compared to binary alloy. The results presented in this study show higher hardening effect in Cu-Zr-B alloy compared to Cu-Zr alloy, resulting in stable hardness values during thermomechanical treatment. Further, it can be seen that finely dispersed reinforcing ZrB2 particles in copper matrix does not have significant influence on its conductivity. Moreover, both systems Cu-Zr and Cu-Zr-B exhibit better electrical conductivity after thermomechanical treatment as a result of zirconium reduction in solid solution due to its precipitation.
AB  - Високо проводне легуре бакра са додатком цирконијума произведене су
металургијом праха. У постизању побољшаних механичких и физичких својстава CuZr легуре примењен је двостепени процес производње, који садржи механичко легирање
праћено топлим пресовањем. У овом раду проучаван је утицај бора на својства Cu-Zr
легура поређењем система Cu-1Zr (теж.%) и Cu-1.1Zr-0.3В (теж.%). Промене у
микроструктури током производних корака праћене су помоћу метода: скенирајућа
електронска микроскопија, ласерско одређивање величина микро- и наночестица,
компјутерска томографија и рендгенска дифракција. Посебно су посматране
варијације у величини честица бакра, структурних параметара мешавине праха и
развој CuZr фазе у бинарној легури, као и CuZr фазе и ZrВ2 честица у терцијарној
легури. Показало се да присуство бора повећава густину дислокација у терцијарној
легури током механичког легирања у поређењу са бинарном легуром. Резултати
приказани у овој студији показују већи ефекат ојачавања у легури Cu-Zr-B у поређењу
са легуром Cu-Zr, што резултира стабилним вредностима тврдоће током термичке
обраде. Даље, може се видети да фино дисперговане честице ZrB2 у матрици бакра
показују незнатан утицај на њену проводљивост. Такође, оба система Cu-Zr и Cu-Zr-B
показују бољу електричну проводљивост након термичке обраде као резултат
редукције цирконијума у чврстом раствору услед његовог таложења.
T2  - Science of Sintering
T1  - The influence of boron addition on properties of copper-zirconium alloys
VL  - 55
IS  - 2
SP  - 205
EP  - 219
DO  - 10.2298/SOS220421003S
ER  - 

@article{
author = "Simić, Marko and Ružić, Jovana and Božić, Dušan and Stoimenov, Nikolay and Gyoshev, Stanislav D. and Karastoyanov, Dimitar N. and Stašić, Jelena",
year = "2023",
abstract = "Copper-zirconium alloys with high conductivity were produced using powder metallurgy. Two-steps manufacturing process, containing mechanical alloying followed by hot pressing, was applied in achieving improved mechanical and physical properties of Cu-Zr alloy. In this paper, the influence of boron on Cu-Zr alloys properties was studied on Cu-1Zr (wt.%) and Cu-1.1Zr-0.3B (wt.%) systems. Scanning electron microscopy, laser nanoparticle sizer, computed tomography and X-ray diffraction were employed for observation of changes in the microstructure during production steps. More specifically – variations in size of the Cu particles, powder mixtures’ structural parameters, and development of CuZr phase in binary alloy, CuZr phase and ZrB2 particles in ternary alloy were observed. It was shown that presence of boron increases dislocation density in ternary alloy over the mechanical alloying time compared to binary alloy. The results presented in this study show higher hardening effect in Cu-Zr-B alloy compared to Cu-Zr alloy, resulting in stable hardness values during thermomechanical treatment. Further, it can be seen that finely dispersed reinforcing ZrB2 particles in copper matrix does not have significant influence on its conductivity. Moreover, both systems Cu-Zr and Cu-Zr-B exhibit better electrical conductivity after thermomechanical treatment as a result of zirconium reduction in solid solution due to its precipitation., Високо проводне легуре бакра са додатком цирконијума произведене су
металургијом праха. У постизању побољшаних механичких и физичких својстава CuZr легуре примењен је двостепени процес производње, који садржи механичко легирање
праћено топлим пресовањем. У овом раду проучаван је утицај бора на својства Cu-Zr
легура поређењем система Cu-1Zr (теж.%) и Cu-1.1Zr-0.3В (теж.%). Промене у
микроструктури током производних корака праћене су помоћу метода: скенирајућа
електронска микроскопија, ласерско одређивање величина микро- и наночестица,
компјутерска томографија и рендгенска дифракција. Посебно су посматране
варијације у величини честица бакра, структурних параметара мешавине праха и
развој CuZr фазе у бинарној легури, као и CuZr фазе и ZrВ2 честица у терцијарној
легури. Показало се да присуство бора повећава густину дислокација у терцијарној
легури током механичког легирања у поређењу са бинарном легуром. Резултати
приказани у овој студији показују већи ефекат ојачавања у легури Cu-Zr-B у поређењу
са легуром Cu-Zr, што резултира стабилним вредностима тврдоће током термичке
обраде. Даље, може се видети да фино дисперговане честице ZrB2 у матрици бакра
показују незнатан утицај на њену проводљивост. Такође, оба система Cu-Zr и Cu-Zr-B
показују бољу електричну проводљивост након термичке обраде као резултат
редукције цирконијума у чврстом раствору услед његовог таложења.",
journal = "Science of Sintering",
title = "The influence of boron addition on properties of copper-zirconium alloys",
volume = "55",
number = "2",
pages = "205-219",
doi = "10.2298/SOS220421003S"
}

Simić, M., Ružić, J., Božić, D., Stoimenov, N., Gyoshev, S. D., Karastoyanov, D. N.,& Stašić, J.. (2023). The influence of boron addition on properties of copper-zirconium alloys. in Science of Sintering, 55(2), 205-219.
https://doi.org/10.2298/SOS220421003S

Simić M, Ružić J, Božić D, Stoimenov N, Gyoshev SD, Karastoyanov DN, Stašić J. The influence of boron addition on properties of copper-zirconium alloys. in Science of Sintering. 2023;55(2):205-219.
doi:10.2298/SOS220421003S .

Simić, Marko, Ružić, Jovana, Božić, Dušan, Stoimenov, Nikolay, Gyoshev, Stanislav D., Karastoyanov, Dimitar N., Stašić, Jelena, "The influence of boron addition on properties of copper-zirconium alloys" in Science of Sintering, 55, no. 2 (2023):205-219,
https://doi.org/10.2298/SOS220421003S . .

TY  - CONF
AU  - Stašić, Jelena
AU  - Trtica, Milan
AU  - Kuzmanović, M.
AU  - Savović, Jelena
AU  - Ružić, Jovana
AU  - Simić, M.
AU  - Chen, X.
AU  - Božić, Dušan
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11820
AB  - Austenitic stainless steel 316L finds a number of applications including filtration technology, nuclear industry, biomedicine, etc. Powder metallurgy (PM) allows obtaining the desired structure of the material, from full density to highly porous one, and PM technology most often comprises pressing and sintering steps. Gravity sintering, applied in this work, i.e. liquid phase sintering where the pressing step is excluded, is enabled by adding small amount of boron or its compound [1]. The addition of NiB lowers the sintering temperature by formation of eutectics (liquid phase), and also enhances mechanical properties (tensile strength, hardness) and corrosion resistance of 316L steel [2]. The aim of this work was to examine the surface behavior of PM-obtained 316L-NiB exposed to conditions of high heat fluxes by employing nanosecond laser pulses (TEA CO2 laser emitting at 10.6 μm, fluence ~14 J/cm2, intensity ~40 MW/cm2), which is reported scarcely in literature [3]. Simultaneously with irradiation in vacuum, plasma formed by laser irradiation above the sample surface was analyzed using LIBS (Laser Induced Breakdown Spectroscopy). Namely, small amount of boron (1 wt.% of NiB contains 83 wt.% of Ni and 17 wt.% of B) is not easily detected in gravity sintered sample and one of the techniques of choice could be the LIBS. For comparison purposes, 316L sample wihout NiB was also examined. Laser-irradiated surfaces were analyzed using SEM connected to EDX device. The damage was superficial, with intense melting in the central part of the irradiated spot, Fig. 1(a). LIBS analysis, Fig. 1(b), has shown successful in detecting the presence of boron in the 316L-NiB stainless steel, with low estimated limit of detection of 32 ppm.
PB  - Belgrade : Vinča Institute of Nuclear Sciences
C3  - PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade
T1  - Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy – morphological effects and LIBS analysis
SP  - 124
EP  - 124
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11820
ER  - 

@conference{
author = "Stašić, Jelena and Trtica, Milan and Kuzmanović, M. and Savović, Jelena and Ružić, Jovana and Simić, M. and Chen, X. and Božić, Dušan",
year = "2023",
abstract = "Austenitic stainless steel 316L finds a number of applications including filtration technology, nuclear industry, biomedicine, etc. Powder metallurgy (PM) allows obtaining the desired structure of the material, from full density to highly porous one, and PM technology most often comprises pressing and sintering steps. Gravity sintering, applied in this work, i.e. liquid phase sintering where the pressing step is excluded, is enabled by adding small amount of boron or its compound [1]. The addition of NiB lowers the sintering temperature by formation of eutectics (liquid phase), and also enhances mechanical properties (tensile strength, hardness) and corrosion resistance of 316L steel [2]. The aim of this work was to examine the surface behavior of PM-obtained 316L-NiB exposed to conditions of high heat fluxes by employing nanosecond laser pulses (TEA CO2 laser emitting at 10.6 μm, fluence ~14 J/cm2, intensity ~40 MW/cm2), which is reported scarcely in literature [3]. Simultaneously with irradiation in vacuum, plasma formed by laser irradiation above the sample surface was analyzed using LIBS (Laser Induced Breakdown Spectroscopy). Namely, small amount of boron (1 wt.% of NiB contains 83 wt.% of Ni and 17 wt.% of B) is not easily detected in gravity sintered sample and one of the techniques of choice could be the LIBS. For comparison purposes, 316L sample wihout NiB was also examined. Laser-irradiated surfaces were analyzed using SEM connected to EDX device. The damage was superficial, with intense melting in the central part of the irradiated spot, Fig. 1(a). LIBS analysis, Fig. 1(b), has shown successful in detecting the presence of boron in the 316L-NiB stainless steel, with low estimated limit of detection of 32 ppm.",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences",
journal = "PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade",
title = "Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy – morphological effects and LIBS analysis",
pages = "124-124",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11820"
}

Stašić, J., Trtica, M., Kuzmanović, M., Savović, J., Ružić, J., Simić, M., Chen, X.,& Božić, D.. (2023). Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy – morphological effects and LIBS analysis. in PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade
Belgrade : Vinča Institute of Nuclear Sciences., 124-124.
https://hdl.handle.net/21.15107/rcub_vinar_11820

Stašić J, Trtica M, Kuzmanović M, Savović J, Ružić J, Simić M, Chen X, Božić D. Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy – morphological effects and LIBS analysis. in PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade. 2023;:124-124.
https://hdl.handle.net/21.15107/rcub_vinar_11820 .

Stašić, Jelena, Trtica, Milan, Kuzmanović, M., Savović, Jelena, Ružić, Jovana, Simić, M., Chen, X., Božić, Dušan, "Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy – morphological effects and LIBS analysis" in PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade (2023):124-124,
https://hdl.handle.net/21.15107/rcub_vinar_11820 .

TY  - CONF
AU  - Keta, Otilija D.
AU  - Bošković, Jelena
AU  - Petković, Vladana
AU  - Đorđević, Neda O.
AU  - Dobričić, Vladimir
AU  - Čudina, Olivera
AU  - Pajović, Snežana B.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12089
AB  - Among novel cancer chemotherapy approaches, the use of cyclooxygenases (COXs) and lipoxygenases (LOXs) inhibitors represents a promising mean for cancer treatment showing lesser toxicity comparing to the currently used cytotoxic drugs. This study detailed the synthesis of three novel compounds: 1ME, BHTK-AA, and IBU-Ac, each with the capability to concurrently inhibit both COX-2 and 5-LOX. Subsequently, we assessed their effectiveness in inhibiting the proliferation of HeLa cervical and MIA PaCa-2 pancreatic cancer cells. The IC50 values for both examined cell lines were approximately 40 μM, indicating the promising inhibitory potential of the IBU-Ac compound in both types of cancer cells. This finding is positioned to stimulate further investigation into the potential application of IBU-Ac against these particular types of cancers, while also advocating its use in combination with standard anti-cancer protocols, i.e., chemoterapeutics or radiation therapy. The results of this work are also advocating the development and refinement of dual COX-2 and 5-LOX inhibitors, thus improving their efficacy and safety.
PB  - Kragujevac : Institute for Information Technologies, University of Kragujevac
C3  - ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings
T1  - Synthesis and cytotoxic activity of selected dual COX-2 and 5-LOX inhibitors in HeLa and MIA PaCa-2 human cancer cell lines
SP  - 503
EP  - 506
DO  - 10.46793/ICCBI23.503K
ER  - 

@conference{
author = "Keta, Otilija D. and Bošković, Jelena and Petković, Vladana and Đorđević, Neda O. and Dobričić, Vladimir and Čudina, Olivera and Pajović, Snežana B.",
year = "2023",
abstract = "Among novel cancer chemotherapy approaches, the use of cyclooxygenases (COXs) and lipoxygenases (LOXs) inhibitors represents a promising mean for cancer treatment showing lesser toxicity comparing to the currently used cytotoxic drugs. This study detailed the synthesis of three novel compounds: 1ME, BHTK-AA, and IBU-Ac, each with the capability to concurrently inhibit both COX-2 and 5-LOX. Subsequently, we assessed their effectiveness in inhibiting the proliferation of HeLa cervical and MIA PaCa-2 pancreatic cancer cells. The IC50 values for both examined cell lines were approximately 40 μM, indicating the promising inhibitory potential of the IBU-Ac compound in both types of cancer cells. This finding is positioned to stimulate further investigation into the potential application of IBU-Ac against these particular types of cancers, while also advocating its use in combination with standard anti-cancer protocols, i.e., chemoterapeutics or radiation therapy. The results of this work are also advocating the development and refinement of dual COX-2 and 5-LOX inhibitors, thus improving their efficacy and safety.",
publisher = "Kragujevac : Institute for Information Technologies, University of Kragujevac",
journal = "ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings",
title = "Synthesis and cytotoxic activity of selected dual COX-2 and 5-LOX inhibitors in HeLa and MIA PaCa-2 human cancer cell lines",
pages = "503-506",
doi = "10.46793/ICCBI23.503K"
}

Keta, O. D., Bošković, J., Petković, V., Đorđević, N. O., Dobričić, V., Čudina, O.,& Pajović, S. B.. (2023). Synthesis and cytotoxic activity of selected dual COX-2 and 5-LOX inhibitors in HeLa and MIA PaCa-2 human cancer cell lines. in ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings
Kragujevac : Institute for Information Technologies, University of Kragujevac., 503-506.
https://doi.org/10.46793/ICCBI23.503K

Keta OD, Bošković J, Petković V, Đorđević NO, Dobričić V, Čudina O, Pajović SB. Synthesis and cytotoxic activity of selected dual COX-2 and 5-LOX inhibitors in HeLa and MIA PaCa-2 human cancer cell lines. in ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings. 2023;:503-506.
doi:10.46793/ICCBI23.503K .

Keta, Otilija D., Bošković, Jelena, Petković, Vladana, Đorđević, Neda O., Dobričić, Vladimir, Čudina, Olivera, Pajović, Snežana B., "Synthesis and cytotoxic activity of selected dual COX-2 and 5-LOX inhibitors in HeLa and MIA PaCa-2 human cancer cell lines" in ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings (2023):503-506,
https://doi.org/10.46793/ICCBI23.503K . .

TY  - CONF
AU  - Keta, Otilija
AU  - Petković, Vladana
AU  - Đorđević, Neda
AU  - Đorđević, Miloš
AU  - Ivković, Branka
AU  - Dobričić, Vladimir
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12088
AB  - Given the well-established potential of chalcones in modulating the response of cancer cells to therapeutic interventions, coupled with the growing imperative to enhance their biological attributes, the objective of this study was to synthesize a methoxy-substituted chalcone (OCH3) and assess its capacity to amplify the inhibitory effects of radiation in melanoma cells known for their resistance to radiotherapy. The A375 melanoma cells were subjected to a clinically relevant dose of 2 Gy gamma irradiation. OCH3 was employed either as a standalone treatment or in conjunction with irradiation. The obtained results unveiled the substantial radiosensitizing potential of OCH3 within this specific cell line. Our subsequent investigations will be designed to investigate the underlying mechanisms that contribute to the radiosensitizing properties of OCH3. Moreover, we intend to evaluate the efficacy of OCH3 against other types of radioresistant cancer cells. The presented data not only illuminates the enhanced therapeutic possibilities offered by OCH3 but also highlights its potential as a valuable agent in addressing a wider array of challenging malignancies.
PB  - Kragujevac : Institute for Information Technologies, University of Kragujevac
C3  - ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings
T1  - The effects of a selected methoxy substituted chalcone in human melanoma cells irradiated with γ-rays
SP  - 471
EP  - 474
DO  - 10.46793/ICCBI23.471K
ER  - 

@conference{
author = "Keta, Otilija and Petković, Vladana and Đorđević, Neda and Đorđević, Miloš and Ivković, Branka and Dobričić, Vladimir",
year = "2023",
abstract = "Given the well-established potential of chalcones in modulating the response of cancer cells to therapeutic interventions, coupled with the growing imperative to enhance their biological attributes, the objective of this study was to synthesize a methoxy-substituted chalcone (OCH3) and assess its capacity to amplify the inhibitory effects of radiation in melanoma cells known for their resistance to radiotherapy. The A375 melanoma cells were subjected to a clinically relevant dose of 2 Gy gamma irradiation. OCH3 was employed either as a standalone treatment or in conjunction with irradiation. The obtained results unveiled the substantial radiosensitizing potential of OCH3 within this specific cell line. Our subsequent investigations will be designed to investigate the underlying mechanisms that contribute to the radiosensitizing properties of OCH3. Moreover, we intend to evaluate the efficacy of OCH3 against other types of radioresistant cancer cells. The presented data not only illuminates the enhanced therapeutic possibilities offered by OCH3 but also highlights its potential as a valuable agent in addressing a wider array of challenging malignancies.",
publisher = "Kragujevac : Institute for Information Technologies, University of Kragujevac",
journal = "ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings",
title = "The effects of a selected methoxy substituted chalcone in human melanoma cells irradiated with γ-rays",
pages = "471-474",
doi = "10.46793/ICCBI23.471K"
}

Keta, O., Petković, V., Đorđević, N., Đorđević, M., Ivković, B.,& Dobričić, V.. (2023). The effects of a selected methoxy substituted chalcone in human melanoma cells irradiated with γ-rays. in ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings
Kragujevac : Institute for Information Technologies, University of Kragujevac., 471-474.
https://doi.org/10.46793/ICCBI23.471K

Keta O, Petković V, Đorđević N, Đorđević M, Ivković B, Dobričić V. The effects of a selected methoxy substituted chalcone in human melanoma cells irradiated with γ-rays. in ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings. 2023;:471-474.
doi:10.46793/ICCBI23.471K .

Keta, Otilija, Petković, Vladana, Đorđević, Neda, Đorđević, Miloš, Ivković, Branka, Dobričić, Vladimir, "The effects of a selected methoxy substituted chalcone in human melanoma cells irradiated with γ-rays" in ICCBIKG : 2nd International Conference on Chemo and Bioinformatics : Book of Proceedings (2023):471-474,
https://doi.org/10.46793/ICCBI23.471K . .

TY  - JOUR
AU  - Trtica, Milan
AU  - Stašić, Jelena
AU  - Chen, Xizhang
AU  - Limpouch, Jiri
AU  - Gavrilov, Petr
AU  - Zekić, Andrijana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10868
AB  - Behavior of ODS steel under high energy fluxes is important as it is one of the most promising fusion reactor materials. The addition of hafnium provides improved microstructure and therefore better mechanical properties at high temperatures, and the goal here was to investigate the effects induced on Hf-containing ODS steel by the action of high-intensity ∼1015 W/cm2 radiation obtained by ultrashort pulsed laser. Morphological and chemical parametric study of the surface was conducted at different work ambiences. New data were obtained on damage parameters, threshold fluences and chemical changes. Measured damage depths were ∼7.5 μm (air), ∼14 μm (helium), ∼48 μm (vacuum), which is somewhat lower compared to ODS steel without the addition of hafnium.
T2  - Fusion Engineering and Design
T1  - 16Cr3Al-Hf ODS steel: Surface effects of high laser intensity of 1015 W/cm2 in ambiences of air, helium and vacuum
VL  - 191
SP  - 113766
DO  - 10.1016/j.fusengdes.2023.113766
ER  - 

@article{
author = "Trtica, Milan and Stašić, Jelena and Chen, Xizhang and Limpouch, Jiri and Gavrilov, Petr and Zekić, Andrijana",
year = "2023",
abstract = "Behavior of ODS steel under high energy fluxes is important as it is one of the most promising fusion reactor materials. The addition of hafnium provides improved microstructure and therefore better mechanical properties at high temperatures, and the goal here was to investigate the effects induced on Hf-containing ODS steel by the action of high-intensity ∼1015 W/cm2 radiation obtained by ultrashort pulsed laser. Morphological and chemical parametric study of the surface was conducted at different work ambiences. New data were obtained on damage parameters, threshold fluences and chemical changes. Measured damage depths were ∼7.5 μm (air), ∼14 μm (helium), ∼48 μm (vacuum), which is somewhat lower compared to ODS steel without the addition of hafnium.",
journal = "Fusion Engineering and Design",
title = "16Cr3Al-Hf ODS steel: Surface effects of high laser intensity of 1015 W/cm2 in ambiences of air, helium and vacuum",
volume = "191",
pages = "113766",
doi = "10.1016/j.fusengdes.2023.113766"
}

Trtica, M., Stašić, J., Chen, X., Limpouch, J., Gavrilov, P.,& Zekić, A.. (2023). 16Cr3Al-Hf ODS steel: Surface effects of high laser intensity of 1015 W/cm2 in ambiences of air, helium and vacuum. in Fusion Engineering and Design, 191, 113766.
https://doi.org/10.1016/j.fusengdes.2023.113766

Trtica M, Stašić J, Chen X, Limpouch J, Gavrilov P, Zekić A. 16Cr3Al-Hf ODS steel: Surface effects of high laser intensity of 1015 W/cm2 in ambiences of air, helium and vacuum. in Fusion Engineering and Design. 2023;191:113766.
doi:10.1016/j.fusengdes.2023.113766 .

Trtica, Milan, Stašić, Jelena, Chen, Xizhang, Limpouch, Jiri, Gavrilov, Petr, Zekić, Andrijana, "16Cr3Al-Hf ODS steel: Surface effects of high laser intensity of 1015 W/cm2 in ambiences of air, helium and vacuum" in Fusion Engineering and Design, 191 (2023):113766,
https://doi.org/10.1016/j.fusengdes.2023.113766 . .

TY  - JOUR
AU  - Trtica, Milan
AU  - Stašić, Jelena
AU  - Chen, Xizhang
AU  - Limpouch, Jiri
AU  - Zekić, Andrijana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11725
AB  - Ferritic 16Cr3Al ODS steel, with and without the addition of hafnium, was exposed to high-intensity laser radiation of the order of 1013 W/cm2. Irradiation was conducted in the environments of helium and vacuum and the obtained surface effects were observed in the sense of morphology and chemical changes. This class of steels is being developed primarily for structural applications in nuclear reactors, which is why their behavior under harsh conditions, including high power densities, is of utmost importance. The obtained results show mostly superficial changes even at a high number of pulses, which points toward the successful implementation of these materials in a number of applications involving severe work conditions.
T2  - Journal of Innovative Materials in Extreme Conditions
T1  - Effects of Laser Radiation at 10 13 W/cm2 Intensity on Ferritic ODS Steel With and Without Hf in Helium and Vacuum
VL  - 4
IS  - 1
SP  - 1
EP  - 9
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11725
ER  - 

@article{
author = "Trtica, Milan and Stašić, Jelena and Chen, Xizhang and Limpouch, Jiri and Zekić, Andrijana",
year = "2023",
abstract = "Ferritic 16Cr3Al ODS steel, with and without the addition of hafnium, was exposed to high-intensity laser radiation of the order of 1013 W/cm2. Irradiation was conducted in the environments of helium and vacuum and the obtained surface effects were observed in the sense of morphology and chemical changes. This class of steels is being developed primarily for structural applications in nuclear reactors, which is why their behavior under harsh conditions, including high power densities, is of utmost importance. The obtained results show mostly superficial changes even at a high number of pulses, which points toward the successful implementation of these materials in a number of applications involving severe work conditions.",
journal = "Journal of Innovative Materials in Extreme Conditions",
title = "Effects of Laser Radiation at 10 13 W/cm2 Intensity on Ferritic ODS Steel With and Without Hf in Helium and Vacuum",
volume = "4",
number = "1",
pages = "1-9",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11725"
}

Trtica, M., Stašić, J., Chen, X., Limpouch, J.,& Zekić, A.. (2023). Effects of Laser Radiation at 10 13 W/cm2 Intensity on Ferritic ODS Steel With and Without Hf in Helium and Vacuum. in Journal of Innovative Materials in Extreme Conditions, 4(1), 1-9.
https://hdl.handle.net/21.15107/rcub_vinar_11725

Trtica M, Stašić J, Chen X, Limpouch J, Zekić A. Effects of Laser Radiation at 10 13 W/cm2 Intensity on Ferritic ODS Steel With and Without Hf in Helium and Vacuum. in Journal of Innovative Materials in Extreme Conditions. 2023;4(1):1-9.
https://hdl.handle.net/21.15107/rcub_vinar_11725 .

Trtica, Milan, Stašić, Jelena, Chen, Xizhang, Limpouch, Jiri, Zekić, Andrijana, "Effects of Laser Radiation at 10 13 W/cm2 Intensity on Ferritic ODS Steel With and Without Hf in Helium and Vacuum" in Journal of Innovative Materials in Extreme Conditions, 4, no. 1 (2023):1-9,
https://hdl.handle.net/21.15107/rcub_vinar_11725 .

TY  - CONF
AU  - Trtica, Milan
AU  - Stašić, Jelena
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11821
AB  - Interaction of a pulsed, ns-laser operating at 10.6 μm with a titanium target in hydrogen ambience was studied. In general, interaction in this type of environment is scarcely studied; however it can be of great importance. Titanium and its alloys show excellent physical and chemical properties and for these reasons they are attractive for aero-space and marine engineering, medicine, nuclear problematics, etc. Some phenomena, especially the action of thermal flux on a material, within fission/fusion reactor for example, can be simulated by ns-laser [1,2]. The Ti-surface variations at high TEA CO2 laser energy density/fluence of ~20 J/cm2 and intensity of ~60 MW/cm2 were investigated in this work. Irradiation was carried out at a reduced H2 atmosphere of ~200 mbar [3]. The energy absorbed from the laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. Also, it should be mentioned that irradiation was accompanied by generation of plasma in front of the target. The following titanium target surface changes and phenomena were observed: (i) the damages were only on a superficial level (Fig. 1B) with depth ≤ 2 μm; (ii) appearance of pores on the grain boundaries in the central irradiated zone (Fig. 1A). The cracking effect is visible as well in this zone. In the main, all changes can be attributed to the extra-fast heating and cooling process; (iii) in the peripheral zones similar features were registered, while the transition between irradiated and non-irradiated region is sharp. It can be concluded from this study that the reported laser fluence and intensity, in hydrogen ambience, effectively modified the titanium target. The created surface structures generally could be acceptable in cases where high roughness is required, while for some applications in nuclear technologies additional studies should be done (in this context, the presence of H2 in fusion reactor materials is not desirable [3]).
PB  - Belgrade : Vinča Institute of Nuclear Sciences
C3  - PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade
T1  - ns-Laser – titanium interaction: hydrogen ambience
SP  - 125
EP  - 125
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11821
ER  - 

@conference{
author = "Trtica, Milan and Stašić, Jelena",
year = "2023",
abstract = "Interaction of a pulsed, ns-laser operating at 10.6 μm with a titanium target in hydrogen ambience was studied. In general, interaction in this type of environment is scarcely studied; however it can be of great importance. Titanium and its alloys show excellent physical and chemical properties and for these reasons they are attractive for aero-space and marine engineering, medicine, nuclear problematics, etc. Some phenomena, especially the action of thermal flux on a material, within fission/fusion reactor for example, can be simulated by ns-laser [1,2]. The Ti-surface variations at high TEA CO2 laser energy density/fluence of ~20 J/cm2 and intensity of ~60 MW/cm2 were investigated in this work. Irradiation was carried out at a reduced H2 atmosphere of ~200 mbar [3]. The energy absorbed from the laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. Also, it should be mentioned that irradiation was accompanied by generation of plasma in front of the target. The following titanium target surface changes and phenomena were observed: (i) the damages were only on a superficial level (Fig. 1B) with depth ≤ 2 μm; (ii) appearance of pores on the grain boundaries in the central irradiated zone (Fig. 1A). The cracking effect is visible as well in this zone. In the main, all changes can be attributed to the extra-fast heating and cooling process; (iii) in the peripheral zones similar features were registered, while the transition between irradiated and non-irradiated region is sharp. It can be concluded from this study that the reported laser fluence and intensity, in hydrogen ambience, effectively modified the titanium target. The created surface structures generally could be acceptable in cases where high roughness is required, while for some applications in nuclear technologies additional studies should be done (in this context, the presence of H2 in fusion reactor materials is not desirable [3]).",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences",
journal = "PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade",
title = "ns-Laser – titanium interaction: hydrogen ambience",
pages = "125-125",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11821"
}

Trtica, M.,& Stašić, J.. (2023). ns-Laser – titanium interaction: hydrogen ambience. in PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade
Belgrade : Vinča Institute of Nuclear Sciences., 125-125.
https://hdl.handle.net/21.15107/rcub_vinar_11821

Trtica M, Stašić J. ns-Laser – titanium interaction: hydrogen ambience. in PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade. 2023;:125-125.
https://hdl.handle.net/21.15107/rcub_vinar_11821 .

Trtica, Milan, Stašić, Jelena, "ns-Laser – titanium interaction: hydrogen ambience" in PHOTONICA2023 : 9th International School and Conference on Photonics : book of abstracts; August 28 - September 1, 2023; Belgrade (2023):125-125,
https://hdl.handle.net/21.15107/rcub_vinar_11821 .