Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.
(2019)
TY - JOUR AU - Filipović, Suzana AU - Pavlović, Vera P. AU - Mitrić, Miodrag AU - Lević, Steva AU - Mitrović, Nebojša AU - Maričić, Aleksa AU - Vlahović, Branislav AU - Pavlović, Vladimir B. PY - 2019 UR - https://doi.org/10.1007/s40145-018-0301-5 UR - https://vinar.vin.bg.ac.rs/handle/123456789/8103 AB - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained. T2 - Journal of Advanced Ceramics T1 - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure VL - 8 IS - 1 SP - 133 EP - 147 DO - 10.1007/s40145-018-0301-5 ER -
@article{ author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.", year = "2019", abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.", journal = "Journal of Advanced Ceramics", title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure", volume = "8", number = "1", pages = "133-147", doi = "10.1007/s40145-018-0301-5" }
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics, 8(1), 133-147. https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147. doi:10.1007/s40145-018-0301-5 .
Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147, https://doi.org/10.1007/s40145-018-0301-5 . .
Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horvath, Endre; Forro, Laszlo; Vlahović, Branislav; Mitrić, Miodrag; Janaćković, Đorđe T.; Pavlović, Vladimir B.
(2018)
TY - JOUR AU - Vujančević, Jelena AU - Bjelajac, Anđelika AU - Ćirković, Jovana AU - Pavlović, Vera P. AU - Horvath, Endre AU - Forro, Laszlo AU - Vlahović, Branislav AU - Mitrić, Miodrag AU - Janaćković, Đorđe T. AU - Pavlović, Vladimir B. PY - 2018 UR - https://vinar.vin.bg.ac.rs/handle/123456789/7651 AB - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films. T2 - Science of Sintering T1 - Structure and photocatalytic properties of sintered TiO2 nanotube arrays VL - 50 IS - 1 SP - 39 EP - 50 DO - 10.2298/SOS1801039V ER -
@article{ author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forro, Laszlo and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe T. and Pavlović, Vladimir B.", year = "2018", abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.", journal = "Science of Sintering", title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays", volume = "50", number = "1", pages = "39-50", doi = "10.2298/SOS1801039V" }
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forro, L., Vlahović, B., Mitrić, M., Janaćković, Đ. T.,& Pavlović, V. B.. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering, 50(1), 39-50. https://doi.org/10.2298/SOS1801039V
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forro L, Vlahović B, Mitrić M, Janaćković ĐT, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering. 2018;50(1):39-50. doi:10.2298/SOS1801039V .
Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horvath, Endre, Forro, Laszlo, Vlahović, Branislav, Mitrić, Miodrag, Janaćković, Đorđe T., Pavlović, Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" in Science of Sintering, 50, no. 1 (2018):39-50, https://doi.org/10.2298/SOS1801039V . .