NSF CREST [HRD-0833184]

Link to this page

NSF CREST [HRD-0833184]

Authors

Publications

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav; Medić, Mina M.; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav
AU  - Medić, Mina M.
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9563
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz. © 2021 The Authors
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
VL  - 96
SP  - 107093
DO  - 10.1016/j.polymertesting.2021.107093
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav and Medić, Mina M. and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz. © 2021 The Authors",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
volume = "96",
pages = "107093",
doi = "10.1016/j.polymertesting.2021.107093"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M., Medić, M. M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V.. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing, 96, 107093.
https://doi.org/10.1016/j.polymertesting.2021.107093
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin M, Medić MM, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing. 2021;96:107093.
doi:10.1016/j.polymertesting.2021.107093 .
Pavlović, Vera P., Tošić, Dragana, Dojčilović, Radovan, Dudić, Duško, Dramićanin, Miroslav, Medić, Mina M., McPherson, Michael M., Pavlović, Vladimir B., Vlahović, Branislav, Đoković, Vladimir, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix" in Polymer Testing, 96 (2021):107093,
https://doi.org/10.1016/j.polymertesting.2021.107093 . .
16
2
16

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8103
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
VL  - 8
IS  - 1
SP  - 133
EP  - 147
DO  - 10.1007/s40145-018-0301-5
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
volume = "8",
number = "1",
pages = "133-147",
doi = "10.1007/s40145-018-0301-5"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics, 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5 .
Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 . .
1
9
9
11

Structure and photocatalytic properties of sintered TiO2 nanotube arrays

Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horvath, Endre; Forro, Laszlo; Vlahović, Branislav; Mitrić, Miodrag; Janaćković, Đorđe T.; Pavlović, Vladimir B.

(2018)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horvath, Endre
AU  - Forro, Laszlo
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7651
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
VL  - 50
IS  - 1
SP  - 39
EP  - 50
DO  - 10.2298/SOS1801039V
ER  - 
@article{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forro, Laszlo and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe T. and Pavlović, Vladimir B.",
year = "2018",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.",
journal = "Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
volume = "50",
number = "1",
pages = "39-50",
doi = "10.2298/SOS1801039V"
}
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forro, L., Vlahović, B., Mitrić, M., Janaćković, Đ. T.,& Pavlović, V. B.. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering, 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forro L, Vlahović B, Mitrić M, Janaćković ĐT, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering. 2018;50(1):39-50.
doi:10.2298/SOS1801039V .
Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horvath, Endre, Forro, Laszlo, Vlahović, Branislav, Mitrić, Miodrag, Janaćković, Đorđe T., Pavlović, Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" in Science of Sintering, 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V . .
8
9
11