Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200126 (University of Belgrade, Faculty of Mining and Geology)

Link to this page

info:eu-repo/grantAgreement/MESTD/inst-2020/200126/RS//

Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200126 (University of Belgrade, Faculty of Mining and Geology) (en)
Ministarstvo prosvete, nauke i tehnološkog razvoja Republike Srbije, Ugovor br. 451-03-68/2020-14/200126 (Univerzitet u Beogradu, Rudarsko-geološki fakultet) (sr_RS)
Министарство просвете, науке и технолошког развоја Републике Србије, Уговор бр. 451-03-68/2020-14/200126 (Универзитет у Београду, Рударско-геолошки факултет) (sr)
Authors

Publications

Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles

Anđelković, Ljubica; Šuljagić, Marija; Pavlović, Vladimir; Mirković, Miljana; Vrbica, Boško; Novaković, Irena; Stanković, Dalibor; Kremenović, Aleksandar; Uskoković, Vuk

(2024)

TY  - JOUR
AU  - Anđelković, Ljubica
AU  - Šuljagić, Marija
AU  - Pavlović, Vladimir
AU  - Mirković, Miljana
AU  - Vrbica, Boško
AU  - Novaković, Irena
AU  - Stanković, Dalibor
AU  - Kremenović, Aleksandar
AU  - Uskoković, Vuk
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13175
AB  - Metals and metal oxides have subpar antibacterial activities compared to those of small-molecule antibiotics, yet there are hopes that with proper compositional and structural adjustments this gap might be bridged. In this study, titanium dioxide (TiO2) nanoparticles were mechanically activated and combined with particulate silver through simple reduction process elicited by UV irradiation and assisted with the ultrasound. The resulting powders in various combinations (Ag vs. no Ag, activated vs. non-activated) were characterized using a range of experimental techniques and assessed for their antibacterial activities. The preparation procedure presented in this work prevails over the disadvantages of many chemical routes, most critically by avoiding the use of toxic substances. The mechanical activation did not reduce the particle size or crystallinity of TiO2 nor did it consistently alter the bandgap, yet it enabled the doubling of the amount of silver incorporable into the material. Further, while both mechanical activation and the addition of silver in the amount not exceeding 0.5 wt% produced barely detectable structural changes in the material, they both augmented its antibacterial activity. The precursor TiO2 powder produced no inhibition zone against any of the four bacterial species tested, while the mechanical activation of TiO2 led to the formation of distinct inhibition zones against each of the four bacterial species tested. The addition of silver to activated TiO2 further widened the inhibition zones and it also imparted the antibacterial activity to non-activated TiO2. The boost in the antibacterial activity achieved by the short mechanical activation was of a similar magnitude as the boost obtained after the addition of silver. The antibacterial activity was not different for different species when no silver was added to the system. However, with the addition of silver, species selectivity was obtained, as the composites were more effective against the two Gram-negative species (Escherichia coli and Klebsiella pneumoniae) than against the two Gram-positive ones (Staphylococcus aureus and Bacillus subtilis). The antibacterial activity increased with the addition of silver in the broth assay, but it was mediocre compared to that detected in the agar assay, attesting to the poor dispersability of the powders and their best performance when the bacterial cells migrate to the composite surface than vice versa. The findings of this study give hope that with appropriate microstructural or compositional alterations, the antibacterial activity of metal oxide powders and inorganic materials in general can be made comparable to that of small-molecule antibiotics.
T2  - Colloids and Surfaces A: Physicochemical and Engineering Aspects
T1  - Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles
VL  - 691
SP  - 133890
DO  - 10.1016/j.colsurfa.2024.133890
ER  - 
@article{
author = "Anđelković, Ljubica and Šuljagić, Marija and Pavlović, Vladimir and Mirković, Miljana and Vrbica, Boško and Novaković, Irena and Stanković, Dalibor and Kremenović, Aleksandar and Uskoković, Vuk",
year = "2024",
abstract = "Metals and metal oxides have subpar antibacterial activities compared to those of small-molecule antibiotics, yet there are hopes that with proper compositional and structural adjustments this gap might be bridged. In this study, titanium dioxide (TiO2) nanoparticles were mechanically activated and combined with particulate silver through simple reduction process elicited by UV irradiation and assisted with the ultrasound. The resulting powders in various combinations (Ag vs. no Ag, activated vs. non-activated) were characterized using a range of experimental techniques and assessed for their antibacterial activities. The preparation procedure presented in this work prevails over the disadvantages of many chemical routes, most critically by avoiding the use of toxic substances. The mechanical activation did not reduce the particle size or crystallinity of TiO2 nor did it consistently alter the bandgap, yet it enabled the doubling of the amount of silver incorporable into the material. Further, while both mechanical activation and the addition of silver in the amount not exceeding 0.5 wt% produced barely detectable structural changes in the material, they both augmented its antibacterial activity. The precursor TiO2 powder produced no inhibition zone against any of the four bacterial species tested, while the mechanical activation of TiO2 led to the formation of distinct inhibition zones against each of the four bacterial species tested. The addition of silver to activated TiO2 further widened the inhibition zones and it also imparted the antibacterial activity to non-activated TiO2. The boost in the antibacterial activity achieved by the short mechanical activation was of a similar magnitude as the boost obtained after the addition of silver. The antibacterial activity was not different for different species when no silver was added to the system. However, with the addition of silver, species selectivity was obtained, as the composites were more effective against the two Gram-negative species (Escherichia coli and Klebsiella pneumoniae) than against the two Gram-positive ones (Staphylococcus aureus and Bacillus subtilis). The antibacterial activity increased with the addition of silver in the broth assay, but it was mediocre compared to that detected in the agar assay, attesting to the poor dispersability of the powders and their best performance when the bacterial cells migrate to the composite surface than vice versa. The findings of this study give hope that with appropriate microstructural or compositional alterations, the antibacterial activity of metal oxide powders and inorganic materials in general can be made comparable to that of small-molecule antibiotics.",
journal = "Colloids and Surfaces A: Physicochemical and Engineering Aspects",
title = "Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles",
volume = "691",
pages = "133890",
doi = "10.1016/j.colsurfa.2024.133890"
}
Anđelković, L., Šuljagić, M., Pavlović, V., Mirković, M., Vrbica, B., Novaković, I., Stanković, D., Kremenović, A.,& Uskoković, V.. (2024). Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles. in Colloids and Surfaces A: Physicochemical and Engineering Aspects, 691, 133890.
https://doi.org/10.1016/j.colsurfa.2024.133890
Anđelković L, Šuljagić M, Pavlović V, Mirković M, Vrbica B, Novaković I, Stanković D, Kremenović A, Uskoković V. Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles. in Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2024;691:133890.
doi:10.1016/j.colsurfa.2024.133890 .
Anđelković, Ljubica, Šuljagić, Marija, Pavlović, Vladimir, Mirković, Miljana, Vrbica, Boško, Novaković, Irena, Stanković, Dalibor, Kremenović, Aleksandar, Uskoković, Vuk, "Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles" in Colloids and Surfaces A: Physicochemical and Engineering Aspects, 691 (2024):133890,
https://doi.org/10.1016/j.colsurfa.2024.133890 . .

BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties

Šuljagić, Marija; Petronijević, Ivan; Mirković, Miljana M.; Kremenović, Aleksandar S.; Džunuzović, Adis; Pavlović, Vladimir B.; Kalezić-Glišović, Aleksandra; Anđelković, Ljubica

(2023)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Petronijević, Ivan
AU  - Mirković, Miljana M.
AU  - Kremenović, Aleksandar S.
AU  - Džunuzović, Adis
AU  - Pavlović, Vladimir B.
AU  - Kalezić-Glišović, Aleksandra
AU  - Anđelković, Ljubica
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10690
AB  - To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were investigated. The optimal phase composition in the BaTiO3/NiFe2O4 composite, sintered at 1150 °C, resulted in a wide frequency range stability. Additionally, particular phase composition indicates favorable properties such as low conductivity and ideal-like hysteresis loop behavior. The favorable properties of BaTiO3/NiFe2O4 make this particular composite an ideal material choice for further studies on applications of multi-ferroic devices.
T2  - Inorganics
T1  - BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties
VL  - 11
IS  - 2
SP  - 51
DO  - 10.3390/inorganics11020051
ER  - 
@article{
author = "Šuljagić, Marija and Petronijević, Ivan and Mirković, Miljana M. and Kremenović, Aleksandar S. and Džunuzović, Adis and Pavlović, Vladimir B. and Kalezić-Glišović, Aleksandra and Anđelković, Ljubica",
year = "2023",
abstract = "To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were investigated. The optimal phase composition in the BaTiO3/NiFe2O4 composite, sintered at 1150 °C, resulted in a wide frequency range stability. Additionally, particular phase composition indicates favorable properties such as low conductivity and ideal-like hysteresis loop behavior. The favorable properties of BaTiO3/NiFe2O4 make this particular composite an ideal material choice for further studies on applications of multi-ferroic devices.",
journal = "Inorganics",
title = "BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties",
volume = "11",
number = "2",
pages = "51",
doi = "10.3390/inorganics11020051"
}
Šuljagić, M., Petronijević, I., Mirković, M. M., Kremenović, A. S., Džunuzović, A., Pavlović, V. B., Kalezić-Glišović, A.,& Anđelković, L.. (2023). BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties. in Inorganics, 11(2), 51.
https://doi.org/10.3390/inorganics11020051
Šuljagić M, Petronijević I, Mirković MM, Kremenović AS, Džunuzović A, Pavlović VB, Kalezić-Glišović A, Anđelković L. BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties. in Inorganics. 2023;11(2):51.
doi:10.3390/inorganics11020051 .
Šuljagić, Marija, Petronijević, Ivan, Mirković, Miljana M., Kremenović, Aleksandar S., Džunuzović, Adis, Pavlović, Vladimir B., Kalezić-Glišović, Aleksandra, Anđelković, Ljubica, "BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties" in Inorganics, 11, no. 2 (2023):51,
https://doi.org/10.3390/inorganics11020051 . .
2
1

Understanding the Effect of Synthesis and Sintering Temperature on the Functional Properties of Barium Titanate/ Cobalt Ferrite Composites

Šuljagić, Marija; Kremenović, Aleksandar; Petronijević, Ivan; Džunuzović, Adis; Mirković, Miljana; Pavlović, Vladimir; Anđelković, Ljubica

(2023)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Kremenović, Aleksandar
AU  - Petronijević, Ivan
AU  - Džunuzović, Adis
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir
AU  - Anđelković, Ljubica
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11726
AB  - To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the samples sintered at 1300°C had better performances than those sintered at 1150°C. The composite synthesized by thermal decomposition and sintered at 1300 °C stands out among other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency range and low leakage currents. The obtained results indicate that such composite might be successfully applied as a functional multiferroic.
AB  - У циљу испитивања утицаја методе синтезе као и температуре синтеровања на функционална својства керамике перовскитно/спинелне структуре, синтетисани су BaTiO3/CoFe2O4 композити методама термалне декомпозиције, копреципитације и микроемулзије, а затим синтеровани на 1150 °C и 1300 °C. Фазни састав и морфологија синтетисаних узорака детаљно су испитани пре и после синтеровања помоћу рендгенске дифракције на праху (XRPD) и скенирајуће електронске микроскпије (SEM) спрегнуте са елекрон дисперзивном спектроскопијом (EDS). Изведена су опсежна испитивања како диелектричних, тако и фероелектричних својстава датих композита. У већини случајева узорци синтеровани на 1300 °C показали су боља својства од узорака синтерованих на 1150 °C. Композит синтетисан методом термалне декомпозиције и синтерован на 1300 °C издваја се од осталих синтетисаних BaTiO3/CoFe2O4 узорака захваљујући великој стабилносту у широком фреквентном опсегу и малим струјама цурења. Добијени резултати недвосмислено указују да истакнути композит може бити успешно примењен као функционални мултифероик.
T2  - Science of Sintering
T1  - Understanding the  Effect of Synthesis and Sintering Temperature on the Functional Properties of Barium Titanate/ Cobalt Ferrite  Composites
VL  - 55
SP  - 367
EP  - 381
DO  - 10.2298/SOS220512013S
ER  - 
@article{
author = "Šuljagić, Marija and Kremenović, Aleksandar and Petronijević, Ivan and Džunuzović, Adis and Mirković, Miljana and Pavlović, Vladimir and Anđelković, Ljubica",
year = "2023",
abstract = "To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the samples sintered at 1300°C had better performances than those sintered at 1150°C. The composite synthesized by thermal decomposition and sintered at 1300 °C stands out among other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency range and low leakage currents. The obtained results indicate that such composite might be successfully applied as a functional multiferroic., У циљу испитивања утицаја методе синтезе као и температуре синтеровања на функционална својства керамике перовскитно/спинелне структуре, синтетисани су BaTiO3/CoFe2O4 композити методама термалне декомпозиције, копреципитације и микроемулзије, а затим синтеровани на 1150 °C и 1300 °C. Фазни састав и морфологија синтетисаних узорака детаљно су испитани пре и после синтеровања помоћу рендгенске дифракције на праху (XRPD) и скенирајуће електронске микроскпије (SEM) спрегнуте са елекрон дисперзивном спектроскопијом (EDS). Изведена су опсежна испитивања како диелектричних, тако и фероелектричних својстава датих композита. У већини случајева узорци синтеровани на 1300 °C показали су боља својства од узорака синтерованих на 1150 °C. Композит синтетисан методом термалне декомпозиције и синтерован на 1300 °C издваја се од осталих синтетисаних BaTiO3/CoFe2O4 узорака захваљујући великој стабилносту у широком фреквентном опсегу и малим струјама цурења. Добијени резултати недвосмислено указују да истакнути композит може бити успешно примењен као функционални мултифероик.",
journal = "Science of Sintering",
title = "Understanding the  Effect of Synthesis and Sintering Temperature on the Functional Properties of Barium Titanate/ Cobalt Ferrite  Composites",
volume = "55",
pages = "367-381",
doi = "10.2298/SOS220512013S"
}
Šuljagić, M., Kremenović, A., Petronijević, I., Džunuzović, A., Mirković, M., Pavlović, V.,& Anđelković, L.. (2023). Understanding the  Effect of Synthesis and Sintering Temperature on the Functional Properties of Barium Titanate/ Cobalt Ferrite  Composites. in Science of Sintering, 55, 367-381.
https://doi.org/10.2298/SOS220512013S
Šuljagić M, Kremenović A, Petronijević I, Džunuzović A, Mirković M, Pavlović V, Anđelković L. Understanding the  Effect of Synthesis and Sintering Temperature on the Functional Properties of Barium Titanate/ Cobalt Ferrite  Composites. in Science of Sintering. 2023;55:367-381.
doi:10.2298/SOS220512013S .
Šuljagić, Marija, Kremenović, Aleksandar, Petronijević, Ivan, Džunuzović, Adis, Mirković, Miljana, Pavlović, Vladimir, Anđelković, Ljubica, "Understanding the  Effect of Synthesis and Sintering Temperature on the Functional Properties of Barium Titanate/ Cobalt Ferrite  Composites" in Science of Sintering, 55 (2023):367-381,
https://doi.org/10.2298/SOS220512013S . .