TY  - JOUR
AU  - Ružić, Jovana
AU  - Stašić, Jelena
AU  - Božić, Dušan
AU  - Dojčinović, Marina
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1942
AB  - Copper matrix composites reinforced with ZrB2 particles were produced in two ways: by hot pressing (HP) and laser-sintering process. Powder mixture Cu-Zr-B was mechanically alloyed before densification processes. Variations in the microstructure of treated samples obtained during cavitation test were analyzed by scanning electron microscopy (SEM). Cavitation erosion resistance was investigated with the standard test method for cavitation erosion using vibratory apparatus. Changes in mechanical alloying duration show a strong influence on cavitation erosion resistance of Cu-ZrB2 composites regardless the number of reinforcements. Laser-sintered samples show better cavitation erosion resistance than hot-pressed samples.
T2  - Metallurgical and Materials Engineering
T1  - Influence of the Fabrication Process of Copper Matrix Composites on Cavitation Erosion Resistance
VL  - 23
IS  - 4
SP  - 291
EP  - 301
DO  - 10.30544/244291
ER  - 

@article{
author = "Ružić, Jovana and Stašić, Jelena and Božić, Dušan and Dojčinović, Marina and Volkov-Husović, Tatjana",
year = "2017",
abstract = "Copper matrix composites reinforced with ZrB2 particles were produced in two ways: by hot pressing (HP) and laser-sintering process. Powder mixture Cu-Zr-B was mechanically alloyed before densification processes. Variations in the microstructure of treated samples obtained during cavitation test were analyzed by scanning electron microscopy (SEM). Cavitation erosion resistance was investigated with the standard test method for cavitation erosion using vibratory apparatus. Changes in mechanical alloying duration show a strong influence on cavitation erosion resistance of Cu-ZrB2 composites regardless the number of reinforcements. Laser-sintered samples show better cavitation erosion resistance than hot-pressed samples.",
journal = "Metallurgical and Materials Engineering",
title = "Influence of the Fabrication Process of Copper Matrix Composites on Cavitation Erosion Resistance",
volume = "23",
number = "4",
pages = "291-301",
doi = "10.30544/244291"
}

Ružić, J., Stašić, J., Božić, D., Dojčinović, M.,& Volkov-Husović, T.. (2017). Influence of the Fabrication Process of Copper Matrix Composites on Cavitation Erosion Resistance. in Metallurgical and Materials Engineering, 23(4), 291-301.
https://doi.org/10.30544/244291

Ružić J, Stašić J, Božić D, Dojčinović M, Volkov-Husović T. Influence of the Fabrication Process of Copper Matrix Composites on Cavitation Erosion Resistance. in Metallurgical and Materials Engineering. 2017;23(4):291-301.
doi:10.30544/244291 .

Ružić, Jovana, Stašić, Jelena, Božić, Dušan, Dojčinović, Marina, Volkov-Husović, Tatjana, "Influence of the Fabrication Process of Copper Matrix Composites on Cavitation Erosion Resistance" in Metallurgical and Materials Engineering, 23, no. 4 (2017):291-301,
https://doi.org/10.30544/244291 . .

TY  - JOUR
AU  - Dimitrijević, Marija M.
AU  - Dojčinović, Marina
AU  - Devečerski, Aleksandar
AU  - Jančić-Heinemann, Radmila
AU  - Volkov-Husović, Tatjana
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5472
AB  - Alumina based specimens having different content of alumina based fibers were investigated for possible application as cavitation resistant material. Cavitation damages of the alumina based specimens were tested by the modified vibratory cavitation set up. Erosion rates were measured based on the method developed for metallic samples, mass loss was measured during the experiment. Surface erosion was determined during the experiment simultaneously to mass loss measurements. Image Pro Plus Program was applied for surface analysis during testing. Results indicate that investigated material exhibit excellent mechanical properties and very good resistance to cavitation erosion.
T2  - Science of Sintering
T1  - The Use of Image Analysis for Determination of Surface Deterioration Level of Improved Alumina Based Materials Subjected to Cavitation
VL  - 45
IS  - 1
SP  - 97
EP  - 105
DO  - 10.2298/SOS1301097D
ER  - 

@article{
author = "Dimitrijević, Marija M. and Dojčinović, Marina and Devečerski, Aleksandar and Jančić-Heinemann, Radmila and Volkov-Husović, Tatjana",
year = "2013",
abstract = "Alumina based specimens having different content of alumina based fibers were investigated for possible application as cavitation resistant material. Cavitation damages of the alumina based specimens were tested by the modified vibratory cavitation set up. Erosion rates were measured based on the method developed for metallic samples, mass loss was measured during the experiment. Surface erosion was determined during the experiment simultaneously to mass loss measurements. Image Pro Plus Program was applied for surface analysis during testing. Results indicate that investigated material exhibit excellent mechanical properties and very good resistance to cavitation erosion.",
journal = "Science of Sintering",
title = "The Use of Image Analysis for Determination of Surface Deterioration Level of Improved Alumina Based Materials Subjected to Cavitation",
volume = "45",
number = "1",
pages = "97-105",
doi = "10.2298/SOS1301097D"
}

Dimitrijević, M. M., Dojčinović, M., Devečerski, A., Jančić-Heinemann, R.,& Volkov-Husović, T.. (2013). The Use of Image Analysis for Determination of Surface Deterioration Level of Improved Alumina Based Materials Subjected to Cavitation. in Science of Sintering, 45(1), 97-105.
https://doi.org/10.2298/SOS1301097D

Dimitrijević MM, Dojčinović M, Devečerski A, Jančić-Heinemann R, Volkov-Husović T. The Use of Image Analysis for Determination of Surface Deterioration Level of Improved Alumina Based Materials Subjected to Cavitation. in Science of Sintering. 2013;45(1):97-105.
doi:10.2298/SOS1301097D .

Dimitrijević, Marija M., Dojčinović, Marina, Devečerski, Aleksandar, Jančić-Heinemann, Radmila, Volkov-Husović, Tatjana, "The Use of Image Analysis for Determination of Surface Deterioration Level of Improved Alumina Based Materials Subjected to Cavitation" in Science of Sintering, 45, no. 1 (2013):97-105,
https://doi.org/10.2298/SOS1301097D . .