TY  - JOUR
AU  - Savić, Veljko
AU  - Dojčinović, M.
AU  - Topalović, V.
AU  - Cvijović-Alagić, Ivana
AU  - Stojanović, J.
AU  - Matijašević, S.
AU  - Grujić, S.
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12447
AB  - The incombustible portion of coal that remains after burning is known as bottom or fly ash, and it has a detrimental influence on the environment. One of the possible alternatives for reducing the amount of ash deposited in landfills might be the production of useful glass–ceramic from vitrified fly ash. Glass–ceramic was synthesized using fly ash from the thermal power plant "Nikola Tesla" and fluxing additives. Sinter crystallization of the parent glass resulted in glass ceramics. The glass was created by melting a combination of coal fly ash (CFA), Na2CO3, and CaCO3 at T = 1500 °C and quenching the melt in the air. Glass powders were sintered at temperatures 850 and 900 °C. The resulting glass–ceramics were characterized microstructurally, physically, and mechanically. The cavitation erosion of samples was evaluated. The cavitation rate was 0.015 mg/min for the sample sintered at 850 °C and 0.0053 mg/min for the sample sintered at 900 °C. The leaching of heavy metals in glass–ceramic samples was determined using Toxicity Characteristic Leaching Procedure. A low concentration of heavy metals in the leaching solution showed that heavy metals were successfully incorporated in the glass matrix and that obtained glass–ceramics are ecologically safe for usage. Both samples exhibit good resistance to cavitation erosion, suggesting their potential as possible replacements for structural ceramics commonly employed components of hydraulic machinery.
T2  - International Journal of Environmental Science and Technology
T1  - The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash
DO  - 10.1007/s13762-023-05411-9
ER  - 

@article{
author = "Savić, Veljko and Dojčinović, M. and Topalović, V. and Cvijović-Alagić, Ivana and Stojanović, J. and Matijašević, S. and Grujić, S.",
year = "2024",
abstract = "The incombustible portion of coal that remains after burning is known as bottom or fly ash, and it has a detrimental influence on the environment. One of the possible alternatives for reducing the amount of ash deposited in landfills might be the production of useful glass–ceramic from vitrified fly ash. Glass–ceramic was synthesized using fly ash from the thermal power plant "Nikola Tesla" and fluxing additives. Sinter crystallization of the parent glass resulted in glass ceramics. The glass was created by melting a combination of coal fly ash (CFA), Na2CO3, and CaCO3 at T = 1500 °C and quenching the melt in the air. Glass powders were sintered at temperatures 850 and 900 °C. The resulting glass–ceramics were characterized microstructurally, physically, and mechanically. The cavitation erosion of samples was evaluated. The cavitation rate was 0.015 mg/min for the sample sintered at 850 °C and 0.0053 mg/min for the sample sintered at 900 °C. The leaching of heavy metals in glass–ceramic samples was determined using Toxicity Characteristic Leaching Procedure. A low concentration of heavy metals in the leaching solution showed that heavy metals were successfully incorporated in the glass matrix and that obtained glass–ceramics are ecologically safe for usage. Both samples exhibit good resistance to cavitation erosion, suggesting their potential as possible replacements for structural ceramics commonly employed components of hydraulic machinery.",
journal = "International Journal of Environmental Science and Technology",
title = "The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash",
doi = "10.1007/s13762-023-05411-9"
}

Savić, V., Dojčinović, M., Topalović, V., Cvijović-Alagić, I., Stojanović, J., Matijašević, S.,& Grujić, S.. (2024). The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash. in International Journal of Environmental Science and Technology.
https://doi.org/10.1007/s13762-023-05411-9

Savić V, Dojčinović M, Topalović V, Cvijović-Alagić I, Stojanović J, Matijašević S, Grujić S. The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash. in International Journal of Environmental Science and Technology. 2024;.
doi:10.1007/s13762-023-05411-9 .

Savić, Veljko, Dojčinović, M., Topalović, V., Cvijović-Alagić, Ivana, Stojanović, J., Matijašević, S., Grujić, S., "The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash" in International Journal of Environmental Science and Technology (2024),
https://doi.org/10.1007/s13762-023-05411-9 . .

TY  - CONF
AU  - Cvijović-Alagić, Ivana
AU  - Maletaškić, Jelena
AU  - Pavkov, Vladimir
AU  - Putić, Slaviša
AU  - Matović, Branko
AU  - Maksimović, Vesna
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13200
PB  - Belgrade : Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade
PB  - Belgrade : Serbian Society for Innovative Materials in Extreme Conditions (SIM-EXTREME)
C3  - IMEC2024 - 2nd International Conference on Innovative Materials in Extreme Conditions : Book of abstracts
T1  - Hydrogen embrittlement in additively manufactured metals: A concise review
SP  - 57
EP  - 57
UR  - https://hdl.handle.net/21.15107/rcub_vinar_13200
ER  - 

@conference{
author = "Cvijović-Alagić, Ivana and Maletaškić, Jelena and Pavkov, Vladimir and Putić, Slaviša and Matović, Branko and Maksimović, Vesna",
year = "2024",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, Belgrade : Serbian Society for Innovative Materials in Extreme Conditions (SIM-EXTREME)",
journal = "IMEC2024 - 2nd International Conference on Innovative Materials in Extreme Conditions : Book of abstracts",
title = "Hydrogen embrittlement in additively manufactured metals: A concise review",
pages = "57-57",
url = "https://hdl.handle.net/21.15107/rcub_vinar_13200"
}

Cvijović-Alagić, I., Maletaškić, J., Pavkov, V., Putić, S., Matović, B.,& Maksimović, V.. (2024). Hydrogen embrittlement in additively manufactured metals: A concise review. in IMEC2024 - 2nd International Conference on Innovative Materials in Extreme Conditions : Book of abstracts
Belgrade : Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade., 57-57.
https://hdl.handle.net/21.15107/rcub_vinar_13200

Cvijović-Alagić I, Maletaškić J, Pavkov V, Putić S, Matović B, Maksimović V. Hydrogen embrittlement in additively manufactured metals: A concise review. in IMEC2024 - 2nd International Conference on Innovative Materials in Extreme Conditions : Book of abstracts. 2024;:57-57.
https://hdl.handle.net/21.15107/rcub_vinar_13200 .

Cvijović-Alagić, Ivana, Maletaškić, Jelena, Pavkov, Vladimir, Putić, Slaviša, Matović, Branko, Maksimović, Vesna, "Hydrogen embrittlement in additively manufactured metals: A concise review" in IMEC2024 - 2nd International Conference on Innovative Materials in Extreme Conditions : Book of abstracts (2024):57-57,
https://hdl.handle.net/21.15107/rcub_vinar_13200 .

TY  - JOUR
AU  - Salah Adeen Embirsh, Hifa
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Knežević, Nataša
AU  - Milošević, Milena
AU  - Mijatov, Slavko
AU  - Jančić Heinemann, Radmila
AU  - Marinković, Aleksandar
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13225
AB  - Materials from green resources boast a low carbon footprint, forming the foundation of the circular economy approach in materials science. Thus, in this study, waste poly(ethylene terephthalate) (PET) was subjected to depolymerization using propylene glycol (PG), and subsequent polycondensation with bio-based maleic anhydride (MA) produced unsaturated polyester resin (b-UPR). Bio-derived acryloyl-modified Kraft lignin (KfL-A) served as a vinyl reactive filler in the b-UPR matrix to create b-UPR/KfL-A composites. The structural characterization of KfL-A and b-UPR involved the use of FTIR and NMR techniques. The mechanical properties of the newly fabricated composites were assessed through tensile strength, Vickers microhardness, and dynamic mechanical tests. The addition of KfL-A to the rigid b-UPR matrix enhanced material flexibility, resulting in less stiff and hard materials while preserving composite toughness. For instance, incorporating 10 wt.% of KfL-A in b-UPR led to a 17% reduction in hardness, a 48% decrease in tensile strength, and a 20% reduction in toughness. Positive environmental impact was achieved by incorporation of 64 wt.% of renewable and recycled raw material. Analogously prepared b-UPR/KfL composites showed structural inhomogeneity and somewhat better mechanical properties. Transmission (TEM) and scanning (SEM) electron microscopies revealed a suitable relationship between mechanical and structural properties of composites in relation to the extent of KfL-A addition. The UL94V flammability rating confirmed that flame resistance increased proportionally with the KfL-A addition. Once deposited in a landfill, these composites are expected to disintegrate more easily than PET, causing less harm to the environment and contributing to sustainability in the plastics cycle.
T2  - Chemosphere
T1  - Unsaturated polyester resin based composites: A case study of lignin valorisation
IS  - InPress
SP  - 142144
DO  - 10.1016/j.chemosphere.2024.142144
ER  - 

@article{
author = "Salah Adeen Embirsh, Hifa and Vuksanović, Marija M. and Mladenović, Ivana O. and Knežević, Nataša and Milošević, Milena and Mijatov, Slavko and Jančić Heinemann, Radmila and Marinković, Aleksandar",
year = "2024",
abstract = "Materials from green resources boast a low carbon footprint, forming the foundation of the circular economy approach in materials science. Thus, in this study, waste poly(ethylene terephthalate) (PET) was subjected to depolymerization using propylene glycol (PG), and subsequent polycondensation with bio-based maleic anhydride (MA) produced unsaturated polyester resin (b-UPR). Bio-derived acryloyl-modified Kraft lignin (KfL-A) served as a vinyl reactive filler in the b-UPR matrix to create b-UPR/KfL-A composites. The structural characterization of KfL-A and b-UPR involved the use of FTIR and NMR techniques. The mechanical properties of the newly fabricated composites were assessed through tensile strength, Vickers microhardness, and dynamic mechanical tests. The addition of KfL-A to the rigid b-UPR matrix enhanced material flexibility, resulting in less stiff and hard materials while preserving composite toughness. For instance, incorporating 10 wt.% of KfL-A in b-UPR led to a 17% reduction in hardness, a 48% decrease in tensile strength, and a 20% reduction in toughness. Positive environmental impact was achieved by incorporation of 64 wt.% of renewable and recycled raw material. Analogously prepared b-UPR/KfL composites showed structural inhomogeneity and somewhat better mechanical properties. Transmission (TEM) and scanning (SEM) electron microscopies revealed a suitable relationship between mechanical and structural properties of composites in relation to the extent of KfL-A addition. The UL94V flammability rating confirmed that flame resistance increased proportionally with the KfL-A addition. Once deposited in a landfill, these composites are expected to disintegrate more easily than PET, causing less harm to the environment and contributing to sustainability in the plastics cycle.",
journal = "Chemosphere",
title = "Unsaturated polyester resin based composites: A case study of lignin valorisation",
number = "InPress",
pages = "142144",
doi = "10.1016/j.chemosphere.2024.142144"
}

Salah Adeen Embirsh, H., Vuksanović, M. M., Mladenović, I. O., Knežević, N., Milošević, M., Mijatov, S., Jančić Heinemann, R.,& Marinković, A.. (2024). Unsaturated polyester resin based composites: A case study of lignin valorisation. in Chemosphere(InPress), 142144.
https://doi.org/10.1016/j.chemosphere.2024.142144

Salah Adeen Embirsh H, Vuksanović MM, Mladenović IO, Knežević N, Milošević M, Mijatov S, Jančić Heinemann R, Marinković A. Unsaturated polyester resin based composites: A case study of lignin valorisation. in Chemosphere. 2024;(InPress):142144.
doi:10.1016/j.chemosphere.2024.142144 .

Salah Adeen Embirsh, Hifa, Vuksanović, Marija M., Mladenović, Ivana O., Knežević, Nataša, Milošević, Milena, Mijatov, Slavko, Jančić Heinemann, Radmila, Marinković, Aleksandar, "Unsaturated polyester resin based composites: A case study of lignin valorisation" in Chemosphere, no. InPress (2024):142144,
https://doi.org/10.1016/j.chemosphere.2024.142144 . .

TY  - JOUR
AU  - Alazreg, Asma
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11720
AB  - The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforcedwith MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested bymicrohardness measurements.
T2  - Materials Letters
T1  - Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles
VL  - 354
SP  - 135354
DO  - 10.1016/j.matlet.2023.135354
ER  - 

@article{
author = "Alazreg, Asma and Vuksanović, Marija M. and Mladenović, Ivana O. and Egelja, Adela and Janković-Mandić, Ljiljana and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforcedwith MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested bymicrohardness measurements.",
journal = "Materials Letters",
title = "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles",
volume = "354",
pages = "135354",
doi = "10.1016/j.matlet.2023.135354"
}

Alazreg, A., Vuksanović, M. M., Mladenović, I. O., Egelja, A., Janković-Mandić, L., Marinković, A.,& Jančić-Heinemann, R.. (2024). Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters, 354, 135354.
https://doi.org/10.1016/j.matlet.2023.135354

Alazreg A, Vuksanović MM, Mladenović IO, Egelja A, Janković-Mandić L, Marinković A, Jančić-Heinemann R. Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters. 2024;354:135354.
doi:10.1016/j.matlet.2023.135354 .

Alazreg, Asma, Vuksanović, Marija M., Mladenović, Ivana O., Egelja, Adela, Janković-Mandić, Ljiljana, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles" in Materials Letters, 354 (2024):135354,
https://doi.org/10.1016/j.matlet.2023.135354 . .

TY  - JOUR
AU  - Abduarahman, Muna Abdualatif
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Egelja, Adela
AU  - Savić, Andrija B.
AU  - Veličković, Zlate
AU  - Marinković, Aleksandar
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12866
AB  - This study aimed to investigate the adsorption of As(V), phosphate, and textile dye Acid Green 25 (AG-25) on layered double hydroxides Mn-Fe_LDH and corresponding membranes (wCell/Mn-Fe_LDH). The wCell membrane, derived from waste tobacco boxes, was formed by cross-linking of epoxy and amino modified cellulose fibers with epoxy modified Mn-Fe_LDH and lysine as cross-linker. Structural and morphological analyses were conducted for Mn-Fe_LDH and wCell/Mn-Fe_LDH. The batch system explored pH, contact time, temperature, and initial concentration effects on wCell/Mn-Fe_LDH adsorption efficiency. Adsorption capacities of 82.71, 106.9, and 130.3 mg g−1 were achieved for As(V), phosphate, and AG-25, respectively, indicating effective anionic species removal. Kinetic analysis suggested intraparticle diffusion as the rate-limiting step. Thermodynamic parameters and ionic strength effects indicated a physisorption mechanism for AG-25 and surface complexation for As(V) and phosphate. Biodegradation experiments after five adsorption/desorption cycles revealed the membrane’s decomposition, with phosphate’s strong bonding releasing essential elements valuable for soil fertilization. Effluent wastewater treatment demonstrated low environmental impact through the formation of insoluble As(V) salts and photocatalytic dye degradation.
T2  - Journal of Polymers and the Environment
T1  - Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal
IS  - InPress
DO  - 10.1007/s10924-024-03192-x
ER  - 

@article{
author = "Abduarahman, Muna Abdualatif and Vuksanović, Marija M. and Milošević, Milena and Egelja, Adela and Savić, Andrija B. and Veličković, Zlate and Marinković, Aleksandar",
year = "2024",
abstract = "This study aimed to investigate the adsorption of As(V), phosphate, and textile dye Acid Green 25 (AG-25) on layered double hydroxides Mn-Fe_LDH and corresponding membranes (wCell/Mn-Fe_LDH). The wCell membrane, derived from waste tobacco boxes, was formed by cross-linking of epoxy and amino modified cellulose fibers with epoxy modified Mn-Fe_LDH and lysine as cross-linker. Structural and morphological analyses were conducted for Mn-Fe_LDH and wCell/Mn-Fe_LDH. The batch system explored pH, contact time, temperature, and initial concentration effects on wCell/Mn-Fe_LDH adsorption efficiency. Adsorption capacities of 82.71, 106.9, and 130.3 mg g−1 were achieved for As(V), phosphate, and AG-25, respectively, indicating effective anionic species removal. Kinetic analysis suggested intraparticle diffusion as the rate-limiting step. Thermodynamic parameters and ionic strength effects indicated a physisorption mechanism for AG-25 and surface complexation for As(V) and phosphate. Biodegradation experiments after five adsorption/desorption cycles revealed the membrane’s decomposition, with phosphate’s strong bonding releasing essential elements valuable for soil fertilization. Effluent wastewater treatment demonstrated low environmental impact through the formation of insoluble As(V) salts and photocatalytic dye degradation.",
journal = "Journal of Polymers and the Environment",
title = "Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal",
number = "InPress",
doi = "10.1007/s10924-024-03192-x"
}

Abduarahman, M. A., Vuksanović, M. M., Milošević, M., Egelja, A., Savić, A. B., Veličković, Z.,& Marinković, A.. (2024). Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal. in Journal of Polymers and the Environment(InPress).
https://doi.org/10.1007/s10924-024-03192-x

Abduarahman MA, Vuksanović MM, Milošević M, Egelja A, Savić AB, Veličković Z, Marinković A. Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal. in Journal of Polymers and the Environment. 2024;(InPress).
doi:10.1007/s10924-024-03192-x .

Abduarahman, Muna Abdualatif, Vuksanović, Marija M., Milošević, Milena, Egelja, Adela, Savić, Andrija B., Veličković, Zlate, Marinković, Aleksandar, "Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal" in Journal of Polymers and the Environment, no. InPress (2024),
https://doi.org/10.1007/s10924-024-03192-x . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Dimitrijević, Ivan
AU  - Milentijević, Gordana
AU  - Babincev, Ljiljana
AU  - Gržetić, Jelena
AU  - Marinković, Aleksandar
AU  - Milosavljević, Milutin
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12939
AB  - The increase in waste polymer recycling has helped in promoting sustainability, and together with the use of renewable raw materials, it has become a widespread concept with positive effects on both the economy and ecology. Accordingly, the aim of this study was the synthesis of “green” plasticizers, marked as LA/PG/PET/EG/LA, formed from waste poly(ethylene terephthalate) (PET) and bio-based platform chemicals propylene glycol (PG) and levulinic acid (LA). The structure of the obtained plasticizers was complex, as confirmed by results from nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The LA/PG/PET/EG/LA plasticizers and waste poly(vinyl chloride) (PVC) were used in an optimized technology for PVC re-granulate production. The hardness of the PVC-based material with “green” plasticizers, in comparison to commercial plasticizer dioctyl terephthalate (DOTP), increased by 11.3%, while migration decreased. An improved material homogeneity and wettability of the fibers by the matrix were observed using SEM analysis of the material’s fracture surface, with a higher efficiency of intermolecular interactions leading to better mechanical performances of the newly designed materials. Thus, LA/PG/PET/EG/LA are unique materials with good compounding and plasticizing potential for PVC, as revealed by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). In that manner, the use of bio-renewable resources and recycled polymers will contribute to diminishing waste polymer generation, contributing to a lower carbon footprint.
T2  - Processes
T1  - Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation
VL  - 12
IS  - 3
SP  - 520
DO  - 10.3390/pr12030520
ER  - 

@article{
author = "Vuksanović, Marija M. and Milošević, Milena and Dimitrijević, Ivan and Milentijević, Gordana and Babincev, Ljiljana and Gržetić, Jelena and Marinković, Aleksandar and Milosavljević, Milutin",
year = "2024",
abstract = "The increase in waste polymer recycling has helped in promoting sustainability, and together with the use of renewable raw materials, it has become a widespread concept with positive effects on both the economy and ecology. Accordingly, the aim of this study was the synthesis of “green” plasticizers, marked as LA/PG/PET/EG/LA, formed from waste poly(ethylene terephthalate) (PET) and bio-based platform chemicals propylene glycol (PG) and levulinic acid (LA). The structure of the obtained plasticizers was complex, as confirmed by results from nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The LA/PG/PET/EG/LA plasticizers and waste poly(vinyl chloride) (PVC) were used in an optimized technology for PVC re-granulate production. The hardness of the PVC-based material with “green” plasticizers, in comparison to commercial plasticizer dioctyl terephthalate (DOTP), increased by 11.3%, while migration decreased. An improved material homogeneity and wettability of the fibers by the matrix were observed using SEM analysis of the material’s fracture surface, with a higher efficiency of intermolecular interactions leading to better mechanical performances of the newly designed materials. Thus, LA/PG/PET/EG/LA are unique materials with good compounding and plasticizing potential for PVC, as revealed by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). In that manner, the use of bio-renewable resources and recycled polymers will contribute to diminishing waste polymer generation, contributing to a lower carbon footprint.",
journal = "Processes",
title = "Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation",
volume = "12",
number = "3",
pages = "520",
doi = "10.3390/pr12030520"
}

Vuksanović, M. M., Milošević, M., Dimitrijević, I., Milentijević, G., Babincev, L., Gržetić, J., Marinković, A.,& Milosavljević, M.. (2024). Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation. in Processes, 12(3), 520.
https://doi.org/10.3390/pr12030520

Vuksanović MM, Milošević M, Dimitrijević I, Milentijević G, Babincev L, Gržetić J, Marinković A, Milosavljević M. Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation. in Processes. 2024;12(3):520.
doi:10.3390/pr12030520 .

Vuksanović, Marija M., Milošević, Milena, Dimitrijević, Ivan, Milentijević, Gordana, Babincev, Ljiljana, Gržetić, Jelena, Marinković, Aleksandar, Milosavljević, Milutin, "Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation" in Processes, 12, no. 3 (2024):520,
https://doi.org/10.3390/pr12030520 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana
AU  - Radovanović, Željko
AU  - Živković, Predrag
AU  - Savić, Andrija B.
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12952
AB  - Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH-Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i da se ostvaruje bolja adhezija između kompozita i metalne podloge nego između kompozita i staklene podloge.
AB  - Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.
T2  - Tehnika
T1  - Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu
T1  - Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass
VL  - 79
IS  - 1
SP  - 9
EP  - 13
DO  - 10.5937/tehnika2401009V
ER  - 

@article{
author = "Vuksanović, Marija M. and Mladenović, Ivana and Radovanović, Željko and Živković, Predrag and Savić, Andrija B. and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH-Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i da se ostvaruje bolja adhezija između kompozita i metalne podloge nego između kompozita i staklene podloge., Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.",
journal = "Tehnika",
title = "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu, Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass",
volume = "79",
number = "1",
pages = "9-13",
doi = "10.5937/tehnika2401009V"
}

Vuksanović, M. M., Mladenović, I., Radovanović, Ž., Živković, P., Savić, A. B., Marinković, A.,& Jančić-Heinemann, R.. (2024). Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika, 79(1), 9-13.
https://doi.org/10.5937/tehnika2401009V

Vuksanović MM, Mladenović I, Radovanović Ž, Živković P, Savić AB, Marinković A, Jančić-Heinemann R. Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika. 2024;79(1):9-13.
doi:10.5937/tehnika2401009V .

Vuksanović, Marija M., Mladenović, Ivana, Radovanović, Željko, Živković, Predrag, Savić, Andrija B., Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu" in Tehnika, 79, no. 1 (2024):9-13,
https://doi.org/10.5937/tehnika2401009V . .

TY  - JOUR
AU  - Taboun, Abdulrraouf
AU  - Jovanović, Marija
AU  - Petrović, Miloš
AU  - Stajčić, Ivana
AU  - Pešić, Ivan
AU  - Stojanović, Dušica B.
AU  - Radojević, Vesna
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13220
AB  - The aim of this study is to investigate the influence of cross-linking and reinforcements in gelatin on the physico-mechanical properties of obtained composites. The gelatin-based composites cross-linked with citric acid (CA) were prepared: gelatin type B (GB) and β-tricalcium phosphate (β-TCP) and novel hybrid composite GB with β-TCP and hydroxyapatite (HAp) particles, and their structure, thermal, and mechanical properties were compared with pure gelatin B samples. FTIR analysis revealed that no chemical interaction between the reinforcements and gelatin matrix was established during the processing of hybrid composites by the solution casting method, proving the particles had no influence on GB cross-linking. The morphological investigation of hybrid composites revealed that cross-linking with CA improved the dispersion of particles, which further led to an increase in mechanical performance. The microindentation test showed that the hardness value was increased by up to 449%, which shows the high potential of β-TCP and HAp particle reinforcement combined with CA as a cross-linking agent. Furthermore, the reduced modulus of elasticity was increased by up to 288%. Results of the MTT assay on L929 cells have revealed that the hybrid composite GB-TCP-HA-CA was not cytotoxic. These results showed that GB cross-linked with CA and reinforced with different calcium phosphates presents a valuable novel material with potential applications in dentistry.
T2  - Polymers
T1  - Citric Acid Cross-Linked Gelatin-Based Composites with Improved Microhardness
VL  - 16
IS  - 8
SP  - 1077
DO  - 10.3390/polym16081077
ER  - 

@article{
author = "Taboun, Abdulrraouf and Jovanović, Marija and Petrović, Miloš and Stajčić, Ivana and Pešić, Ivan and Stojanović, Dušica B. and Radojević, Vesna",
year = "2024",
abstract = "The aim of this study is to investigate the influence of cross-linking and reinforcements in gelatin on the physico-mechanical properties of obtained composites. The gelatin-based composites cross-linked with citric acid (CA) were prepared: gelatin type B (GB) and β-tricalcium phosphate (β-TCP) and novel hybrid composite GB with β-TCP and hydroxyapatite (HAp) particles, and their structure, thermal, and mechanical properties were compared with pure gelatin B samples. FTIR analysis revealed that no chemical interaction between the reinforcements and gelatin matrix was established during the processing of hybrid composites by the solution casting method, proving the particles had no influence on GB cross-linking. The morphological investigation of hybrid composites revealed that cross-linking with CA improved the dispersion of particles, which further led to an increase in mechanical performance. The microindentation test showed that the hardness value was increased by up to 449%, which shows the high potential of β-TCP and HAp particle reinforcement combined with CA as a cross-linking agent. Furthermore, the reduced modulus of elasticity was increased by up to 288%. Results of the MTT assay on L929 cells have revealed that the hybrid composite GB-TCP-HA-CA was not cytotoxic. These results showed that GB cross-linked with CA and reinforced with different calcium phosphates presents a valuable novel material with potential applications in dentistry.",
journal = "Polymers",
title = "Citric Acid Cross-Linked Gelatin-Based Composites with Improved Microhardness",
volume = "16",
number = "8",
pages = "1077",
doi = "10.3390/polym16081077"
}

Taboun, A., Jovanović, M., Petrović, M., Stajčić, I., Pešić, I., Stojanović, D. B.,& Radojević, V.. (2024). Citric Acid Cross-Linked Gelatin-Based Composites with Improved Microhardness. in Polymers, 16(8), 1077.
https://doi.org/10.3390/polym16081077

Taboun A, Jovanović M, Petrović M, Stajčić I, Pešić I, Stojanović DB, Radojević V. Citric Acid Cross-Linked Gelatin-Based Composites with Improved Microhardness. in Polymers. 2024;16(8):1077.
doi:10.3390/polym16081077 .

Taboun, Abdulrraouf, Jovanović, Marija, Petrović, Miloš, Stajčić, Ivana, Pešić, Ivan, Stojanović, Dušica B., Radojević, Vesna, "Citric Acid Cross-Linked Gelatin-Based Composites with Improved Microhardness" in Polymers, 16, no. 8 (2024):1077,
https://doi.org/10.3390/polym16081077 . .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Filipović, Suzana
AU  - Sknepnek, Aleksandra
AU  - Salević-Jelić, Ana
AU  - Jančić-Heinemann, Radmila
AU  - Petrović, Miloš
AU  - Petronijević, Ivan
AU  - Stamenović, Marina
AU  - Živković, Predrag
AU  - Potkonjak, Nebojša
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13219
AB  - This study presents an analysis of films which consist of two layers; one layer is PVDF as the matrix, along with fillers BaTiO3 (BT), and the second is one bacterial nanocellulose (BNC) filled with Fe3O4. The mass fraction of BT in PVDF was 5%, and the samples were differentiated based on the duration of the mechanical activation of BT. This innovative PVDF laminate polymer with environmentally friendly fillers aligns with the concept of circular usage, resulting in a reduction in plastic content and potential improvement of the piezoelectric properties of the entire composite. This work presents new, multifunctional “green” packaging materials that potentially could be a good alternative to specific popular materials used for this purpose. The synthesis of the films was carried out using the hot press method. Tensile tests, water vapor permeability examination, and structural analyses using SEM-EDS and FTIR have been conducted. The sample PVDF/BT20/BNC/Fe3O4 exhibited the best barrier properties (impermeability to water vapor), while the highest tensile strength and toughness were exhibited by the PVDF/BT5/BNC/Fe3O4 sample.
T2  - Polymers
T1  - Structural, Mechanical, and Barrier Properties of the Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Hybrid Composite
VL  - 16
IS  - 8
SP  - 1033
DO  - 10.3390/polym16081033
ER  - 

@article{
author = "Janićijević, Aleksandra and Filipović, Suzana and Sknepnek, Aleksandra and Salević-Jelić, Ana and Jančić-Heinemann, Radmila and Petrović, Miloš and Petronijević, Ivan and Stamenović, Marina and Živković, Predrag and Potkonjak, Nebojša and Pavlović, Vladimir B.",
year = "2024",
abstract = "This study presents an analysis of films which consist of two layers; one layer is PVDF as the matrix, along with fillers BaTiO3 (BT), and the second is one bacterial nanocellulose (BNC) filled with Fe3O4. The mass fraction of BT in PVDF was 5%, and the samples were differentiated based on the duration of the mechanical activation of BT. This innovative PVDF laminate polymer with environmentally friendly fillers aligns with the concept of circular usage, resulting in a reduction in plastic content and potential improvement of the piezoelectric properties of the entire composite. This work presents new, multifunctional “green” packaging materials that potentially could be a good alternative to specific popular materials used for this purpose. The synthesis of the films was carried out using the hot press method. Tensile tests, water vapor permeability examination, and structural analyses using SEM-EDS and FTIR have been conducted. The sample PVDF/BT20/BNC/Fe3O4 exhibited the best barrier properties (impermeability to water vapor), while the highest tensile strength and toughness were exhibited by the PVDF/BT5/BNC/Fe3O4 sample.",
journal = "Polymers",
title = "Structural, Mechanical, and Barrier Properties of the Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Hybrid Composite",
volume = "16",
number = "8",
pages = "1033",
doi = "10.3390/polym16081033"
}

Janićijević, A., Filipović, S., Sknepnek, A., Salević-Jelić, A., Jančić-Heinemann, R., Petrović, M., Petronijević, I., Stamenović, M., Živković, P., Potkonjak, N.,& Pavlović, V. B.. (2024). Structural, Mechanical, and Barrier Properties of the Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Hybrid Composite. in Polymers, 16(8), 1033.
https://doi.org/10.3390/polym16081033

Janićijević A, Filipović S, Sknepnek A, Salević-Jelić A, Jančić-Heinemann R, Petrović M, Petronijević I, Stamenović M, Živković P, Potkonjak N, Pavlović VB. Structural, Mechanical, and Barrier Properties of the Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Hybrid Composite. in Polymers. 2024;16(8):1033.
doi:10.3390/polym16081033 .

Janićijević, Aleksandra, Filipović, Suzana, Sknepnek, Aleksandra, Salević-Jelić, Ana, Jančić-Heinemann, Radmila, Petrović, Miloš, Petronijević, Ivan, Stamenović, Marina, Živković, Predrag, Potkonjak, Nebojša, Pavlović, Vladimir B., "Structural, Mechanical, and Barrier Properties of the Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Hybrid Composite" in Polymers, 16, no. 8 (2024):1033,
https://doi.org/10.3390/polym16081033 . .

TY  - JOUR
AU  - Elhmali, Houda Taher
AU  - Stajčić, Ivana
AU  - Stajčić, Aleksandar
AU  - Pešić, Ivan
AU  - Jovanović, Marija
AU  - Petrović, Miloš
AU  - Radojević, Vesna
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12718
AB  - While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.
T2  - Polymers
T1  - Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior
VL  - 16
IS  - 2
SP  - 278
DO  - 10.3390/polym16020278
ER  - 

@article{
author = "Elhmali, Houda Taher and Stajčić, Ivana and Stajčić, Aleksandar and Pešić, Ivan and Jovanović, Marija and Petrović, Miloš and Radojević, Vesna",
year = "2024",
abstract = "While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.",
journal = "Polymers",
title = "Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior",
volume = "16",
number = "2",
pages = "278",
doi = "10.3390/polym16020278"
}

Elhmali, H. T., Stajčić, I., Stajčić, A., Pešić, I., Jovanović, M., Petrović, M.,& Radojević, V.. (2024). Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior. in Polymers, 16(2), 278.
https://doi.org/10.3390/polym16020278

Elhmali HT, Stajčić I, Stajčić A, Pešić I, Jovanović M, Petrović M, Radojević V. Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior. in Polymers. 2024;16(2):278.
doi:10.3390/polym16020278 .

Elhmali, Houda Taher, Stajčić, Ivana, Stajčić, Aleksandar, Pešić, Ivan, Jovanović, Marija, Petrović, Miloš, Radojević, Vesna, "Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior" in Polymers, 16, no. 2 (2024):278,
https://doi.org/10.3390/polym16020278 . .

TY  - JOUR
AU  - Marinković, Aleksandar
AU  - Milošević, Milena
AU  - Vuksanović, Marija
AU  - Jančić-Heinemann, Radmila
AU  - Matijašević, Milica
AU  - Radmilović, Vuk
AU  - Živković, Predrag
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13199
AB  - U ovom radu su predstavljene mogućnosti povećanja hidrofobnosti površine papira nanošenjem slojeva hidrofobnog materijala na njegovu površinu. Ispitane su dve različite tehnike nanošenja stearinske kiseline, šelaka i cink-hidroksida na površinu papira. Hidrofobnost je ispitana modifikovanom metodom po Kobu, merenjem ugla kvašenja i vremena zadržavanja kapi. Prisustvo sredstava za hidrofobizaciju potvrđeno je FTIR spektroskopijom. Utvrđeno je da se, primenjenim metodama nanošenja, mnogo bolji rezultati dobijaju sa stearinskom kiselinom nego sa šelakom.
AB  - The paper shows the possibilities of increasing the hydrophobicity of the paper surface by applying layers of hydrophobic material to the surface. Various application techniques and the following substances were tested: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. It was found that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac. This manuscript presents novel possibilities of increasing paper surface hydrophobicity by applying layers of hydrophobic material to the surface. Various layer application techniques were examined, as well as substances including: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. Based on the results achieved, it can be concluded that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac.
T2  - Tehnika
T1  - Površinska hidrofobizacija ručno pravljenog papira
T1  - Surface hydrophobization of handmade paper
VL  - 79
IS  - 2
SP  - 135
EP  - 142
DO  - 10.5937/tehnika2402135M
ER  - 

@article{
author = "Marinković, Aleksandar and Milošević, Milena and Vuksanović, Marija and Jančić-Heinemann, Radmila and Matijašević, Milica and Radmilović, Vuk and Živković, Predrag",
year = "2024",
abstract = "U ovom radu su predstavljene mogućnosti povećanja hidrofobnosti površine papira nanošenjem slojeva hidrofobnog materijala na njegovu površinu. Ispitane su dve različite tehnike nanošenja stearinske kiseline, šelaka i cink-hidroksida na površinu papira. Hidrofobnost je ispitana modifikovanom metodom po Kobu, merenjem ugla kvašenja i vremena zadržavanja kapi. Prisustvo sredstava za hidrofobizaciju potvrđeno je FTIR spektroskopijom. Utvrđeno je da se, primenjenim metodama nanošenja, mnogo bolji rezultati dobijaju sa stearinskom kiselinom nego sa šelakom., The paper shows the possibilities of increasing the hydrophobicity of the paper surface by applying layers of hydrophobic material to the surface. Various application techniques and the following substances were tested: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. It was found that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac. This manuscript presents novel possibilities of increasing paper surface hydrophobicity by applying layers of hydrophobic material to the surface. Various layer application techniques were examined, as well as substances including: stearic acid, shellac and zinc-hydroxide. Hydrophobicity was tested using the modified Cobb method, measuring the contact angle and drop retention time. The presence of hydrophobizing agents was confirmed by FTIR spectroscopy. Based on the results achieved, it can be concluded that the methods of applying the hydrophobizing agent, used in this work, give much better results with stearic acid, compared to shellac.",
journal = "Tehnika",
title = "Površinska hidrofobizacija ručno pravljenog papira, Surface hydrophobization of handmade paper",
volume = "79",
number = "2",
pages = "135-142",
doi = "10.5937/tehnika2402135M"
}

Marinković, A., Milošević, M., Vuksanović, M., Jančić-Heinemann, R., Matijašević, M., Radmilović, V.,& Živković, P.. (2024). Površinska hidrofobizacija ručno pravljenog papira. in Tehnika, 79(2), 135-142.
https://doi.org/10.5937/tehnika2402135M

Marinković A, Milošević M, Vuksanović M, Jančić-Heinemann R, Matijašević M, Radmilović V, Živković P. Površinska hidrofobizacija ručno pravljenog papira. in Tehnika. 2024;79(2):135-142.
doi:10.5937/tehnika2402135M .

Marinković, Aleksandar, Milošević, Milena, Vuksanović, Marija, Jančić-Heinemann, Radmila, Matijašević, Milica, Radmilović, Vuk, Živković, Predrag, "Površinska hidrofobizacija ručno pravljenog papira" in Tehnika, 79, no. 2 (2024):135-142,
https://doi.org/10.5937/tehnika2402135M . .

TY  - JOUR
AU  - Vuksanović, Marija
AU  - Mladenović, Ivana
AU  - Stupar, Stevan
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12483
AB  - Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification.
T2  - Polymers and Polymer Composites
T1  - Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology
VL  - 32
SP  - 1
EP  - 12
DO  - 10.1177/09673911241228092
ER  - 

@article{
author = "Vuksanović, Marija and Mladenović, Ivana and Stupar, Stevan and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification.",
journal = "Polymers and Polymer Composites",
title = "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology",
volume = "32",
pages = "1-12",
doi = "10.1177/09673911241228092"
}

Vuksanović, M., Mladenović, I., Stupar, S., Marinković, A.,& Jančić-Heinemann, R.. (2024). Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites, 32, 1-12.
https://doi.org/10.1177/09673911241228092

Vuksanović M, Mladenović I, Stupar S, Marinković A, Jančić-Heinemann R. Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites. 2024;32:1-12.
doi:10.1177/09673911241228092 .

Vuksanović, Marija, Mladenović, Ivana, Stupar, Stevan, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology" in Polymers and Polymer Composites, 32 (2024):1-12,
https://doi.org/10.1177/09673911241228092 . .

TY  - JOUR
AU  - Matović, Branko
AU  - Maletaškić, Jelena
AU  - Maksimović, Vesna
AU  - Dimitrijević, Stevan P.
AU  - Todorović, Bratislav
AU  - Pejić, Milan
AU  - Zagorac, Dejan
AU  - Zagorac, Jelena B.
AU  - Zeng, Yu-Ping
AU  - Cvijović-Alagić, Ivana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10697
AB  - Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Yb1/7)2(Sn1/3Hf1/3Zr1/3)2O7 were fabricated through a reaction of metal nitrates (A-site) and metal chlorides (B-site) with sodium hydroxide during the solid state displacement reaction. Room temperature synthesis initially resulted in the obtainment of amorphous powders, which crystallized after subsequent calcination to form single crystalline compounds. Crystalline high-entropy ceramic powders formation took place at temperatures as low as 750 °C. During calcination, defective fluorite (F-A2B2O7) and crystal pyrochlore (Py-A2B2O7) structures coexist. A large number of cations induce the obtainment of stable high-entropy pyrochlores. Results showed that sintering at 1650 °C lead to pure crystalline single-phase pyrochlore formation. High-density ceramic, free of additives, was obtained after powders were compacted and subjected to pressureless sintering at 1650 °C. Multicomponent pyrochlore structure was investigated using the theoretical and experimental multi-methodological approach.
T2  - Boletin de la Sociedad Espanola de Ceramica y Vidrio
T1  - Multicomponent solid solution with pyrochlore structure
T1  - Solución sólida multicomponente con estructura de pirocloro
VL  - 62
IS  - 6
SP  - 515
EP  - 526
DO  - 10.1016/j.bsecv.2023.01.005
ER  - 

@article{
author = "Matović, Branko and Maletaškić, Jelena and Maksimović, Vesna and Dimitrijević, Stevan P. and Todorović, Bratislav and Pejić, Milan and Zagorac, Dejan and Zagorac, Jelena B. and Zeng, Yu-Ping and Cvijović-Alagić, Ivana",
year = "2023",
abstract = "Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Yb1/7)2(Sn1/3Hf1/3Zr1/3)2O7 were fabricated through a reaction of metal nitrates (A-site) and metal chlorides (B-site) with sodium hydroxide during the solid state displacement reaction. Room temperature synthesis initially resulted in the obtainment of amorphous powders, which crystallized after subsequent calcination to form single crystalline compounds. Crystalline high-entropy ceramic powders formation took place at temperatures as low as 750 °C. During calcination, defective fluorite (F-A2B2O7) and crystal pyrochlore (Py-A2B2O7) structures coexist. A large number of cations induce the obtainment of stable high-entropy pyrochlores. Results showed that sintering at 1650 °C lead to pure crystalline single-phase pyrochlore formation. High-density ceramic, free of additives, was obtained after powders were compacted and subjected to pressureless sintering at 1650 °C. Multicomponent pyrochlore structure was investigated using the theoretical and experimental multi-methodological approach.",
journal = "Boletin de la Sociedad Espanola de Ceramica y Vidrio",
title = "Multicomponent solid solution with pyrochlore structure, Solución sólida multicomponente con estructura de pirocloro",
volume = "62",
number = "6",
pages = "515-526",
doi = "10.1016/j.bsecv.2023.01.005"
}

Matović, B., Maletaškić, J., Maksimović, V., Dimitrijević, S. P., Todorović, B., Pejić, M., Zagorac, D., Zagorac, J. B., Zeng, Y.,& Cvijović-Alagić, I.. (2023). Multicomponent solid solution with pyrochlore structure. in Boletin de la Sociedad Espanola de Ceramica y Vidrio, 62(6), 515-526.
https://doi.org/10.1016/j.bsecv.2023.01.005

Matović B, Maletaškić J, Maksimović V, Dimitrijević SP, Todorović B, Pejić M, Zagorac D, Zagorac JB, Zeng Y, Cvijović-Alagić I. Multicomponent solid solution with pyrochlore structure. in Boletin de la Sociedad Espanola de Ceramica y Vidrio. 2023;62(6):515-526.
doi:10.1016/j.bsecv.2023.01.005 .

Matović, Branko, Maletaškić, Jelena, Maksimović, Vesna, Dimitrijević, Stevan P., Todorović, Bratislav, Pejić, Milan, Zagorac, Dejan, Zagorac, Jelena B., Zeng, Yu-Ping, Cvijović-Alagić, Ivana, "Multicomponent solid solution with pyrochlore structure" in Boletin de la Sociedad Espanola de Ceramica y Vidrio, 62, no. 6 (2023):515-526,
https://doi.org/10.1016/j.bsecv.2023.01.005 . .

TY  - JOUR
AU  - Musrati, Walid
AU  - Međo, Bojan
AU  - Cvijović-Alagić, Ivana
AU  - Gubeljak, Nenad
AU  - Štefane, Primož
AU  - Radosavljević, Zoran
AU  - Rakin, Marko
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11325
AB  - Steel pipelines in industrial plants consist of different elements, including seamless and/or welded (seam) pipes. Properties of welded pipes, including their fracture behaviour, depend on the characteristics of both, the base metal, and the weld metal. In this work, two seam pipes are considered having different diameters and manufactured of P235TR1 steel. Hardness and microstructure were examined on the samples which contained the seam zone, to capture the influence of heterogeneity. Fracture resistance of the pipeline material, i.e. of both base metals and both seams, was determined by experimental examination of the recently proposed Pipe ring notch bending specimens with sharp stress concentrators. Differences between the two tested pipes, including the influence of the heterogeneity caused by the welded joint, were determined by comparison of the crack growth resistance curves. Effects of the initial stress concentrator shape, sharp machined notch or fatigue pre-crack are discussed.
AB  - Čelični cevovodi u industrijskim postrojenjima se sastoje od različitih elemenata, uključujući bešavne i/ili zavarene (šavne) cevi. Osobine šavnih cevi, uključujući ponašanje materijala cevi pri lomu, zavise i od osnovnog metala i od metala šava. U ovom radu razmatrane su dve šavne cevi različitih prečnika, izrađene od čelika P235TR1. Tvrdoća i mikrostruktura su analizirane na uzorcima isečenim iz cevi u zoni šava, da bi se odredio uticaj heterogenosti. Otpornost prema lomu materijala cevovoda, tj. oba osnovna metala i oba šava, je određena na osnovu ispitivanja epruveta oblika prstena sa oštrim koncentratorima napona, predloženih u prethodnim studijama. Poređenjem krivih otpornosti prema rastu prsline određene su razlike između dve ispitivane cevi, kao i uticaj heterogenosti izazvan postojanjem zavarenog spoja. Razmotren je uticaj oblika početnog koncentratora napona, oštrog žleba odnosno zamorne početne prsline.
T2  - Hemijska industrija
T1  - Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters
T1  - Otpornost prema lomu, tvrdoća i mikrostruktura šavnih cevi različitog prečnika izrađenih od čelika P235TR1
VL  - 77
IS  - 2
SP  - 155
EP  - 165
DO  - 10.2298/HEMIND230222016M
ER  - 

@article{
author = "Musrati, Walid and Međo, Bojan and Cvijović-Alagić, Ivana and Gubeljak, Nenad and Štefane, Primož and Radosavljević, Zoran and Rakin, Marko",
year = "2023",
abstract = "Steel pipelines in industrial plants consist of different elements, including seamless and/or welded (seam) pipes. Properties of welded pipes, including their fracture behaviour, depend on the characteristics of both, the base metal, and the weld metal. In this work, two seam pipes are considered having different diameters and manufactured of P235TR1 steel. Hardness and microstructure were examined on the samples which contained the seam zone, to capture the influence of heterogeneity. Fracture resistance of the pipeline material, i.e. of both base metals and both seams, was determined by experimental examination of the recently proposed Pipe ring notch bending specimens with sharp stress concentrators. Differences between the two tested pipes, including the influence of the heterogeneity caused by the welded joint, were determined by comparison of the crack growth resistance curves. Effects of the initial stress concentrator shape, sharp machined notch or fatigue pre-crack are discussed., Čelični cevovodi u industrijskim postrojenjima se sastoje od različitih elemenata, uključujući bešavne i/ili zavarene (šavne) cevi. Osobine šavnih cevi, uključujući ponašanje materijala cevi pri lomu, zavise i od osnovnog metala i od metala šava. U ovom radu razmatrane su dve šavne cevi različitih prečnika, izrađene od čelika P235TR1. Tvrdoća i mikrostruktura su analizirane na uzorcima isečenim iz cevi u zoni šava, da bi se odredio uticaj heterogenosti. Otpornost prema lomu materijala cevovoda, tj. oba osnovna metala i oba šava, je određena na osnovu ispitivanja epruveta oblika prstena sa oštrim koncentratorima napona, predloženih u prethodnim studijama. Poređenjem krivih otpornosti prema rastu prsline određene su razlike između dve ispitivane cevi, kao i uticaj heterogenosti izazvan postojanjem zavarenog spoja. Razmotren je uticaj oblika početnog koncentratora napona, oštrog žleba odnosno zamorne početne prsline.",
journal = "Hemijska industrija",
title = "Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters, Otpornost prema lomu, tvrdoća i mikrostruktura šavnih cevi različitog prečnika izrađenih od čelika P235TR1",
volume = "77",
number = "2",
pages = "155-165",
doi = "10.2298/HEMIND230222016M"
}

Musrati, W., Međo, B., Cvijović-Alagić, I., Gubeljak, N., Štefane, P., Radosavljević, Z.,& Rakin, M.. (2023). Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters. in Hemijska industrija, 77(2), 155-165.
https://doi.org/10.2298/HEMIND230222016M

Musrati W, Međo B, Cvijović-Alagić I, Gubeljak N, Štefane P, Radosavljević Z, Rakin M. Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters. in Hemijska industrija. 2023;77(2):155-165.
doi:10.2298/HEMIND230222016M .

Musrati, Walid, Međo, Bojan, Cvijović-Alagić, Ivana, Gubeljak, Nenad, Štefane, Primož, Radosavljević, Zoran, Rakin, Marko, "Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters" in Hemijska industrija, 77, no. 2 (2023):155-165,
https://doi.org/10.2298/HEMIND230222016M . .

TY  - JOUR
AU  - Nešić, Aleksandra
AU  - Kokunešoski, Maja
AU  - Meseldžija, Slađana
AU  - Volkov-Husović, Tatjana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12664
AB  - The textile industry is one of the largest water-consuming industries in the world. The wastewater generated by the textile industry is a major source of pollution, containing mostly dyes, but also detergents, and heavy metals. Since dyes can have a negative impact on the environment, human and aquatic life, it is really important to find proper solutions for removal of these pollutants from wastewater. In addition, special attention is given to the discovery of new and fast "in situ" methods for identification and quantification of pollutants from wastewater. In this paper, SBA-15, mesoporous silica material, was used as sorbent for removal of Basic Yellow 28 from aqueous solutions. In addition, colored SBA-15 after sorption process was subjected to image analysis, to evaluate if it was possible to quantify sorbed dye on sorbent based on intensity of SBA-15 coloration. The obtained results revealed that SBA-15 could remove 99% of dye within 5 min. The highest efficiency of dye removal was at pH8, using 200 mg of sorbent. According to the Langmuir isotherm model, the theoretical maximum sorption capacity was 909 mg/g. Image-Pro software confirmed that it would be possible to quantify sorbed dye onto SBA-15 with accuracy of 0.98. Overall, SBA-15 demonstrated to be efficient sorbent in removal of Basic Yellow 28 from water, but also to be potential carrier as a sensor for detection of colored pollutants in water.
AB  - Tekstilna industrija je jedna od najvećih potrošača vode u odnosu na druge industrijske grane. Otpadne vode iz tekstilne industrije su jedan od glavnih izvora zagađenja i uglavnom sadrže boje, ali takođe i deterdžente i teške metale. Pošto boje mogu imati negativan uticaj na životnu sredinu, ljude i vodeni svet, važno je pronaći odgovarajuća rešenja za uklanjanje ovih zagađivača iz otpadnih voda. Pored toga, posebna pažnja je posvećena otkrivanju novih i brzih „in situ” metoda za identifikaciju i kvantifikaciju zagađivača iz otpadnih voda. U ovom radu kao sorbent za uklanjanje Basic Yellow 28 boje iz vodenih rastvora korišćen je SBA-15, mezoporozni silika materijal. Pored toga, obojeni SBA-15 nakon procesa sorpcije podvrgnuti su analizi slike, kako bi se procenilo da li je moguće kvantifikovati sorbovanu boju na sorbentu na osnovu intenziteta obojenosti SBA-15. Dobijeni rezultati su pokazali da SBA-15 može ukloniti 99% boje u roku od 5 minuta. Najveća efikasnost uklanjanja boje bila je pri pH 8, korišćenjem 200 mg sorbenta. Prema Langmuirovom modelu, teoretski maksimalni kapacitet sorpcije bio je 909 mg/g. Softver Image-Pro je potvrdio da je moguće kvantifikovati boju na SBA-15 sa tačnošću od 0,98. SBA-15 se pokazao kao efikasan sorbent u uklanjanju Basic Yellow 28 boje iz vode, ali i kao potencijalni senzor za detekciju obojenih zagađivača u vodi.
T2  - Advanced Technologies
T1  - Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions
T1  - Senzor na bazi mezoporozne silike za kolorimetrijsko određivanje boje Basic Yellow 28 u vodenim rastvorima
VL  - 12
IS  - 2
SP  - 37
EP  - 42
DO  - 10.5937/savteh2302036N
ER  - 

@article{
author = "Nešić, Aleksandra and Kokunešoski, Maja and Meseldžija, Slađana and Volkov-Husović, Tatjana",
year = "2023",
abstract = "The textile industry is one of the largest water-consuming industries in the world. The wastewater generated by the textile industry is a major source of pollution, containing mostly dyes, but also detergents, and heavy metals. Since dyes can have a negative impact on the environment, human and aquatic life, it is really important to find proper solutions for removal of these pollutants from wastewater. In addition, special attention is given to the discovery of new and fast "in situ" methods for identification and quantification of pollutants from wastewater. In this paper, SBA-15, mesoporous silica material, was used as sorbent for removal of Basic Yellow 28 from aqueous solutions. In addition, colored SBA-15 after sorption process was subjected to image analysis, to evaluate if it was possible to quantify sorbed dye on sorbent based on intensity of SBA-15 coloration. The obtained results revealed that SBA-15 could remove 99% of dye within 5 min. The highest efficiency of dye removal was at pH8, using 200 mg of sorbent. According to the Langmuir isotherm model, the theoretical maximum sorption capacity was 909 mg/g. Image-Pro software confirmed that it would be possible to quantify sorbed dye onto SBA-15 with accuracy of 0.98. Overall, SBA-15 demonstrated to be efficient sorbent in removal of Basic Yellow 28 from water, but also to be potential carrier as a sensor for detection of colored pollutants in water., Tekstilna industrija je jedna od najvećih potrošača vode u odnosu na druge industrijske grane. Otpadne vode iz tekstilne industrije su jedan od glavnih izvora zagađenja i uglavnom sadrže boje, ali takođe i deterdžente i teške metale. Pošto boje mogu imati negativan uticaj na životnu sredinu, ljude i vodeni svet, važno je pronaći odgovarajuća rešenja za uklanjanje ovih zagađivača iz otpadnih voda. Pored toga, posebna pažnja je posvećena otkrivanju novih i brzih „in situ” metoda za identifikaciju i kvantifikaciju zagađivača iz otpadnih voda. U ovom radu kao sorbent za uklanjanje Basic Yellow 28 boje iz vodenih rastvora korišćen je SBA-15, mezoporozni silika materijal. Pored toga, obojeni SBA-15 nakon procesa sorpcije podvrgnuti su analizi slike, kako bi se procenilo da li je moguće kvantifikovati sorbovanu boju na sorbentu na osnovu intenziteta obojenosti SBA-15. Dobijeni rezultati su pokazali da SBA-15 može ukloniti 99% boje u roku od 5 minuta. Najveća efikasnost uklanjanja boje bila je pri pH 8, korišćenjem 200 mg sorbenta. Prema Langmuirovom modelu, teoretski maksimalni kapacitet sorpcije bio je 909 mg/g. Softver Image-Pro je potvrdio da je moguće kvantifikovati boju na SBA-15 sa tačnošću od 0,98. SBA-15 se pokazao kao efikasan sorbent u uklanjanju Basic Yellow 28 boje iz vode, ali i kao potencijalni senzor za detekciju obojenih zagađivača u vodi.",
journal = "Advanced Technologies",
title = "Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions, Senzor na bazi mezoporozne silike za kolorimetrijsko određivanje boje Basic Yellow 28 u vodenim rastvorima",
volume = "12",
number = "2",
pages = "37-42",
doi = "10.5937/savteh2302036N"
}

Nešić, A., Kokunešoski, M., Meseldžija, S.,& Volkov-Husović, T.. (2023). Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions. in Advanced Technologies, 12(2), 37-42.
https://doi.org/10.5937/savteh2302036N

Nešić A, Kokunešoski M, Meseldžija S, Volkov-Husović T. Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions. in Advanced Technologies. 2023;12(2):37-42.
doi:10.5937/savteh2302036N .

Nešić, Aleksandra, Kokunešoski, Maja, Meseldžija, Slađana, Volkov-Husović, Tatjana, "Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions" in Advanced Technologies, 12, no. 2 (2023):37-42,
https://doi.org/10.5937/savteh2302036N . .

TY  - JOUR
AU  - Lučić, Milica
AU  - Momčilović, Milan Z.
AU  - Marković, Jelena
AU  - Jović, Mihajlo D.
AU  - Smičiklas, Ivana D.
AU  - Onjia, Antonije E.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10695
AB  - The human health risks of cadmium (Cd), lead (Pb), and nickel (Ni) in fifty regular and slim cigarette brands available in the Serbian market were evaluated. Distributions on per-cigarette basis concentrations of these metals, as determined by graphite furnace atomic absorption spectrometry, were used as inputs in the probabilistic risk assessment. The contents of these metals in cigarettes varied significantly. Larger quantities of the studied metals were observed in regular cigarettes than in slim cigarettes, but the concentration levels per cigarette tobacco mass were higher in slim cigarettes. The metal concentrations in counterfeit cigarettes were marginally higher than those in authentic brands. Based on the mean concentrations, Pb was the most abundant toxic metal, followed by Ni and Cd. The calculated values of the cumulative hazard index (HI) and incremental lifetime cancer risk (ILCR) indicated a low noncarcinogenic risk and low but not negligible carcinogenic risk from Cd, Pb, and Ni. The mean HI and ILCR values obtained using probabilistic and deterministic approaches were similar. A Monte Carlo simulation was employed to minimize the uncertainty of health risk estimation. The sensitivity analysis revealed that the most influential factor was cigarette mass followed by Cd content.
T2  - Toxicological and Environmental Chemistry
T1  - Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes
VL  - 105
IS  - 1-7
SP  - 92
EP  - 110
DO  - 10.1080/02772248.2023.2177291
ER  - 

@article{
author = "Lučić, Milica and Momčilović, Milan Z. and Marković, Jelena and Jović, Mihajlo D. and Smičiklas, Ivana D. and Onjia, Antonije E.",
year = "2023",
abstract = "The human health risks of cadmium (Cd), lead (Pb), and nickel (Ni) in fifty regular and slim cigarette brands available in the Serbian market were evaluated. Distributions on per-cigarette basis concentrations of these metals, as determined by graphite furnace atomic absorption spectrometry, were used as inputs in the probabilistic risk assessment. The contents of these metals in cigarettes varied significantly. Larger quantities of the studied metals were observed in regular cigarettes than in slim cigarettes, but the concentration levels per cigarette tobacco mass were higher in slim cigarettes. The metal concentrations in counterfeit cigarettes were marginally higher than those in authentic brands. Based on the mean concentrations, Pb was the most abundant toxic metal, followed by Ni and Cd. The calculated values of the cumulative hazard index (HI) and incremental lifetime cancer risk (ILCR) indicated a low noncarcinogenic risk and low but not negligible carcinogenic risk from Cd, Pb, and Ni. The mean HI and ILCR values obtained using probabilistic and deterministic approaches were similar. A Monte Carlo simulation was employed to minimize the uncertainty of health risk estimation. The sensitivity analysis revealed that the most influential factor was cigarette mass followed by Cd content.",
journal = "Toxicological and Environmental Chemistry",
title = "Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes",
volume = "105",
number = "1-7",
pages = "92-110",
doi = "10.1080/02772248.2023.2177291"
}

Lučić, M., Momčilović, M. Z., Marković, J., Jović, M. D., Smičiklas, I. D.,& Onjia, A. E.. (2023). Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes. in Toxicological and Environmental Chemistry, 105(1-7), 92-110.
https://doi.org/10.1080/02772248.2023.2177291

Lučić M, Momčilović MZ, Marković J, Jović MD, Smičiklas ID, Onjia AE. Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes. in Toxicological and Environmental Chemistry. 2023;105(1-7):92-110.
doi:10.1080/02772248.2023.2177291 .

Lučić, Milica, Momčilović, Milan Z., Marković, Jelena, Jović, Mihajlo D., Smičiklas, Ivana D., Onjia, Antonije E., "Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes" in Toxicological and Environmental Chemistry, 105, no. 1-7 (2023):92-110,
https://doi.org/10.1080/02772248.2023.2177291 . .

TY  - JOUR
AU  - Radulović, Jelena
AU  - Lučić, Milica
AU  - Nešić, Aleksandra
AU  - Onjia, Antonije
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11356
AB  - Pesticides are extensively used in the cultivation and postharvest protection of citrus fruits, therefore continuous monitoring and health risk assessments of their residues are required. This study aimed to investigate the occurrence of pesticide residues on citrus fruits and to evaluate the acute and chronic risk for adults and children. The risk ranking of twenty-three detected pesticides was carried out according to a matrix ranking scheme. Multiple residues were detected in 83% of 76 analyzed samples. In addition, 28% contained pesticides at or above maximum residue levels (MRLs). The most frequently detected pesticides were imazalil, azoxystrobin, and dimethomorph. According to the risk ranking method, imazalil was classified in the high-risk group, followed by prochloraz, chlorpyrifos, azinphos-methyl, tebufenpyrad, and fenpiroximate, which were considered to pose a medium risk. The majority of detected pesticides (74%) posed a low risk. The health risk assessment indicated that imazalil and thiabendazole contribute to acute (HQa) and chronic (HQc) dietary risk, respectively. The HQc was negligible for the general population, while the HQa of imazalil and thiabendazole exceeded the acceptable level in the worst-case scenario. Cumulative chronic/acute risk (HIc/HIa) assessment showed that chronic risk was acceptable in all samples for children and adults, while the acute risk was unacceptable in 5.3% of citrus fruits for adults and 26% of citrus fruits for children. Sensitivity analyses indicated that the ingestion rate and individual body weight were the most influential risk factors.
T2  - Foods
T1  - Multivariate Assessment and Risk Ranking of Pesticide Residues in Citrus Fruits
VL  - 12
IS  - 13
SP  - 2454
DO  - 10.3390/foods12132454
ER  - 

@article{
author = "Radulović, Jelena and Lučić, Milica and Nešić, Aleksandra and Onjia, Antonije",
year = "2023",
abstract = "Pesticides are extensively used in the cultivation and postharvest protection of citrus fruits, therefore continuous monitoring and health risk assessments of their residues are required. This study aimed to investigate the occurrence of pesticide residues on citrus fruits and to evaluate the acute and chronic risk for adults and children. The risk ranking of twenty-three detected pesticides was carried out according to a matrix ranking scheme. Multiple residues were detected in 83% of 76 analyzed samples. In addition, 28% contained pesticides at or above maximum residue levels (MRLs). The most frequently detected pesticides were imazalil, azoxystrobin, and dimethomorph. According to the risk ranking method, imazalil was classified in the high-risk group, followed by prochloraz, chlorpyrifos, azinphos-methyl, tebufenpyrad, and fenpiroximate, which were considered to pose a medium risk. The majority of detected pesticides (74%) posed a low risk. The health risk assessment indicated that imazalil and thiabendazole contribute to acute (HQa) and chronic (HQc) dietary risk, respectively. The HQc was negligible for the general population, while the HQa of imazalil and thiabendazole exceeded the acceptable level in the worst-case scenario. Cumulative chronic/acute risk (HIc/HIa) assessment showed that chronic risk was acceptable in all samples for children and adults, while the acute risk was unacceptable in 5.3% of citrus fruits for adults and 26% of citrus fruits for children. Sensitivity analyses indicated that the ingestion rate and individual body weight were the most influential risk factors.",
journal = "Foods",
title = "Multivariate Assessment and Risk Ranking of Pesticide Residues in Citrus Fruits",
volume = "12",
number = "13",
pages = "2454",
doi = "10.3390/foods12132454"
}

Radulović, J., Lučić, M., Nešić, A.,& Onjia, A.. (2023). Multivariate Assessment and Risk Ranking of Pesticide Residues in Citrus Fruits. in Foods, 12(13), 2454.
https://doi.org/10.3390/foods12132454

Radulović J, Lučić M, Nešić A, Onjia A. Multivariate Assessment and Risk Ranking of Pesticide Residues in Citrus Fruits. in Foods. 2023;12(13):2454.
doi:10.3390/foods12132454 .

Radulović, Jelena, Lučić, Milica, Nešić, Aleksandra, Onjia, Antonije, "Multivariate Assessment and Risk Ranking of Pesticide Residues in Citrus Fruits" in Foods, 12, no. 13 (2023):2454,
https://doi.org/10.3390/foods12132454 . .

TY  - JOUR
AU  - Marković, Gordana
AU  - Manojlović, Vaso
AU  - Ružić, Jovana
AU  - Sokić, Miroslav
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11722
AB  - Titanium alloys have been present for decades as the main components for the production of various orthopedic and dental elements. However, modern times require titanium alloys with a low Young’s modulus, and without the presence of cytotoxic alloying elements. Machine learning was used with aim to analyze biocompatible titanium alloys and predict the composition of Ti alloys with a low Young’s modulus. A database was created using experimental data for alloy composition, Young’s modulus, and mechanical and thermal properties of biocompatible titanium alloys. The Extra Tree Regression model was built to predict the Young’s modulus of titanium alloys. By processing data of 246 alloys, the specific heat was discovered to be the most influential parameter that contributes to the lowering of the Young’s modulus of titanium alloys. Further, the Monte Carlo method was used to predict the composition of future alloys with the desired properties. Simulation results of ten million samples, with predefined conditions for obtaining titanium alloys with a Young’s modulus lower than 70 GPa, show that it is possible to obtain several multicomponent alloys, consisting of five main elements: titanium, zirconium, tin, manganese and niobium.
T2  - Materials
T1  - Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
VL  - 16
IS  - 19
SP  - 6355
DO  - 10.3390/ma16196355
ER  - 

@article{
author = "Marković, Gordana and Manojlović, Vaso and Ružić, Jovana and Sokić, Miroslav",
year = "2023",
abstract = "Titanium alloys have been present for decades as the main components for the production of various orthopedic and dental elements. However, modern times require titanium alloys with a low Young’s modulus, and without the presence of cytotoxic alloying elements. Machine learning was used with aim to analyze biocompatible titanium alloys and predict the composition of Ti alloys with a low Young’s modulus. A database was created using experimental data for alloy composition, Young’s modulus, and mechanical and thermal properties of biocompatible titanium alloys. The Extra Tree Regression model was built to predict the Young’s modulus of titanium alloys. By processing data of 246 alloys, the specific heat was discovered to be the most influential parameter that contributes to the lowering of the Young’s modulus of titanium alloys. Further, the Monte Carlo method was used to predict the composition of future alloys with the desired properties. Simulation results of ten million samples, with predefined conditions for obtaining titanium alloys with a Young’s modulus lower than 70 GPa, show that it is possible to obtain several multicomponent alloys, consisting of five main elements: titanium, zirconium, tin, manganese and niobium.",
journal = "Materials",
title = "Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning",
volume = "16",
number = "19",
pages = "6355",
doi = "10.3390/ma16196355"
}

Marković, G., Manojlović, V., Ružić, J.,& Sokić, M.. (2023). Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning. in Materials, 16(19), 6355.
https://doi.org/10.3390/ma16196355

Marković G, Manojlović V, Ružić J, Sokić M. Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning. in Materials. 2023;16(19):6355.
doi:10.3390/ma16196355 .

Marković, Gordana, Manojlović, Vaso, Ružić, Jovana, Sokić, Miroslav, "Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning" in Materials, 16, no. 19 (2023):6355,
https://doi.org/10.3390/ma16196355 . .

TY  - JOUR
AU  - Stupar, Stevan
AU  - Vuksanović, Marija M.
AU  - Mijin, Dušan Ž.
AU  - Bučko, Mihael M.
AU  - Joksimović, Vasilija J.
AU  - Barudžija, Tanja
AU  - Tanić, Milan N.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10606
AB  - The presented research focused on the metallization of polyester, cotton, and polyamide 6.6 fabrics using the silver conductive complex to allow electric conductivity through the fabric's surface and enhance the fabric's mechanical properties. The method used for the metallization of studied fabrics does not require the use of expensive toxic chemicals or electricity, making the process more economically acceptable. The signal attenuation was measured in frequency ranges of 1–4 and 5–12 GHz. After five cycles of metallization, the polyester fabric has higher EMI effectiveness, in a lower range was 45.44 and 57.25 dB. X-ray powder diffractometry (XRD) and infrared spectroscopy with Fourier transform infrared spectrophotometry (FT-IR) characterize the modified tissues. Scanning electron microscopy coupled with energy-dispersion spectroscopy (SEM-EDS) was used to determine layers' morphology and elemental composition. Also, the water and air permeability of modified textiles was determined.
T2  - Materials Today Communications
T1  - Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding
VL  - 34
SP  - 105312
DO  - 10.1016/j.mtcomm.2023.105312
ER  - 

@article{
author = "Stupar, Stevan and Vuksanović, Marija M. and Mijin, Dušan Ž. and Bučko, Mihael M. and Joksimović, Vasilija J. and Barudžija, Tanja and Tanić, Milan N.",
year = "2023",
abstract = "The presented research focused on the metallization of polyester, cotton, and polyamide 6.6 fabrics using the silver conductive complex to allow electric conductivity through the fabric's surface and enhance the fabric's mechanical properties. The method used for the metallization of studied fabrics does not require the use of expensive toxic chemicals or electricity, making the process more economically acceptable. The signal attenuation was measured in frequency ranges of 1–4 and 5–12 GHz. After five cycles of metallization, the polyester fabric has higher EMI effectiveness, in a lower range was 45.44 and 57.25 dB. X-ray powder diffractometry (XRD) and infrared spectroscopy with Fourier transform infrared spectrophotometry (FT-IR) characterize the modified tissues. Scanning electron microscopy coupled with energy-dispersion spectroscopy (SEM-EDS) was used to determine layers' morphology and elemental composition. Also, the water and air permeability of modified textiles was determined.",
journal = "Materials Today Communications",
title = "Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding",
volume = "34",
pages = "105312",
doi = "10.1016/j.mtcomm.2023.105312"
}

Stupar, S., Vuksanović, M. M., Mijin, D. Ž., Bučko, M. M., Joksimović, V. J., Barudžija, T.,& Tanić, M. N.. (2023). Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding. in Materials Today Communications, 34, 105312.
https://doi.org/10.1016/j.mtcomm.2023.105312

Stupar S, Vuksanović MM, Mijin DŽ, Bučko MM, Joksimović VJ, Barudžija T, Tanić MN. Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding. in Materials Today Communications. 2023;34:105312.
doi:10.1016/j.mtcomm.2023.105312 .

Stupar, Stevan, Vuksanović, Marija M., Mijin, Dušan Ž., Bučko, Mihael M., Joksimović, Vasilija J., Barudžija, Tanja, Tanić, Milan N., "Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding" in Materials Today Communications, 34 (2023):105312,
https://doi.org/10.1016/j.mtcomm.2023.105312 . .

TY  - JOUR
AU  - Knežević, Nataša
AU  - Milanović, Jovana Z.
AU  - Veličković, Zlate
AU  - Milošević, Milena
AU  - Vuksanović, Marija M.
AU  - Onjia, Antonije
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11373
AB  - Oxidized cotton linters, TOCell, were used as an adsorbent or derived membrane there from by linterscross-linking with citric acid. The adsorption/desorption study of Pb2+, methylene blue (MB), and crystalviolet (CV) removal, was performed. Adsorption data fitting, obtained using the Langmuir model, gave116 mg g 1 (Pb2+), 179 mg g 1 (MB) and 482 mg g 1 (CV) at 25 ℃ for TOCell linters, while 101 mg g 1(Pb2+), 165 mg g 1 (MB) and 426 mg g 1 (CV) for TOCell membrane. After desorption dyes were subjectedto photocatalytic degradation while lead was transformed into stable lead phthalate (LP), and furtherused as filler in composites based on unsaturated polyester resins (UPR). UPR was synthesized fromwaste polyethylene terephthalate (PET). Structural characterization was performed using FTIR, SEM,and NMR methods. Composites loaded with acryloyl modified kraft lignin (A-KfL) and/or LP was testedfor tensile strength, Vickers microhardness, and fire resistance (UL-94 V method). The best mechanicaland fireproofing properties were obtained at 15 wt.% A-KfL and 40 wt.% Al(OH)3 addition. The resultsof the toxicity leaching test (TCLP) confirmed the environmentally safe stabilization of desorbed pollutantin the UPR matrix. Application of environmentally friendly membranes, susceptible to easy biodegradation, had low negative effects to the environment.
T2  - Journal of Industrial and Engineering Chemistry
T1  - A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane
VL  - 126
SP  - 520
EP  - 536
DO  - 10.1016/j.jiec.2023.06.041
ER  - 

@article{
author = "Knežević, Nataša and Milanović, Jovana Z. and Veličković, Zlate and Milošević, Milena and Vuksanović, Marija M. and Onjia, Antonije and Marinković, Aleksandar",
year = "2023",
abstract = "Oxidized cotton linters, TOCell, were used as an adsorbent or derived membrane there from by linterscross-linking with citric acid. The adsorption/desorption study of Pb2+, methylene blue (MB), and crystalviolet (CV) removal, was performed. Adsorption data fitting, obtained using the Langmuir model, gave116 mg g 1 (Pb2+), 179 mg g 1 (MB) and 482 mg g 1 (CV) at 25 ℃ for TOCell linters, while 101 mg g 1(Pb2+), 165 mg g 1 (MB) and 426 mg g 1 (CV) for TOCell membrane. After desorption dyes were subjectedto photocatalytic degradation while lead was transformed into stable lead phthalate (LP), and furtherused as filler in composites based on unsaturated polyester resins (UPR). UPR was synthesized fromwaste polyethylene terephthalate (PET). Structural characterization was performed using FTIR, SEM,and NMR methods. Composites loaded with acryloyl modified kraft lignin (A-KfL) and/or LP was testedfor tensile strength, Vickers microhardness, and fire resistance (UL-94 V method). The best mechanicaland fireproofing properties were obtained at 15 wt.% A-KfL and 40 wt.% Al(OH)3 addition. The resultsof the toxicity leaching test (TCLP) confirmed the environmentally safe stabilization of desorbed pollutantin the UPR matrix. Application of environmentally friendly membranes, susceptible to easy biodegradation, had low negative effects to the environment.",
journal = "Journal of Industrial and Engineering Chemistry",
title = "A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane",
volume = "126",
pages = "520-536",
doi = "10.1016/j.jiec.2023.06.041"
}

Knežević, N., Milanović, J. Z., Veličković, Z., Milošević, M., Vuksanović, M. M., Onjia, A.,& Marinković, A.. (2023). A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane. in Journal of Industrial and Engineering Chemistry, 126, 520-536.
https://doi.org/10.1016/j.jiec.2023.06.041

Knežević N, Milanović JZ, Veličković Z, Milošević M, Vuksanović MM, Onjia A, Marinković A. A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane. in Journal of Industrial and Engineering Chemistry. 2023;126:520-536.
doi:10.1016/j.jiec.2023.06.041 .

Knežević, Nataša, Milanović, Jovana Z., Veličković, Zlate, Milošević, Milena, Vuksanović, Marija M., Onjia, Antonije, Marinković, Aleksandar, "A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane" in Journal of Industrial and Engineering Chemistry, 126 (2023):520-536,
https://doi.org/10.1016/j.jiec.2023.06.041 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Knežević, Nataša
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Mladenović, Ivana
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11444
AB  - Predmet ovog istraživanja je postupak proizvodnje regranulata polivinil hlorida (PVC) korišćenjem plastifikatora sintetisanog iz recikliranog poli(etilen tereftalata) (PET). Na ovaj način je sintetisan plastifikator koji ne predstavlja rizik po zdravlje ljudi i životnu sredinu u skladu sa prinicima hemijskog lizinga i zelene hemije. Dobijeni plastifikator je okarakterisan primenom elementalne analize, FTIR, i NMR spektroskopije i određivanjem hidroksilnog i kiselinskog broja. Ispitivana su mehanička svojstva materijala dobijenih na bazi recikliranog PVC i plastifikatora iz PET-a prema standardnim metodama.
AB  - The subject of this research is the production process of polyvinyl chloride (PVC) regranulate using a plasticizer synthesized from recycled poly(ethylene terephthalate) (PET). In this way, a plasticizer was synthesized that does not pose a risk to human health and the environment in accordance with the principles of chemical leasing and green chemistry. The obtained plasticizer was characterized using elemental analysis, FTIR, and NMR spectroscopy and determination of hydroxyl and acid number. The mechanical properties of materials obtained on the basis of recycled PVC and plasticizers from PET were tested according to standard methods.
T2  - Tehnika
T1  - Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a
T1  - Testing of the mechanical properties of reggranulate PVC with the addition of plasticizer from waste PET
VL  - 78
IS  - 4
SP  - 389
EP  - 394
DO  - 10.5937/tehnika2304389V
ER  - 

@article{
author = "Vuksanović, Marija M. and Milošević, Milena and Knežević, Nataša and Egelja, Adela and Janković-Mandić, Ljiljana and Mladenović, Ivana and Marinković, Aleksandar",
year = "2023",
abstract = "Predmet ovog istraživanja je postupak proizvodnje regranulata polivinil hlorida (PVC) korišćenjem plastifikatora sintetisanog iz recikliranog poli(etilen tereftalata) (PET). Na ovaj način je sintetisan plastifikator koji ne predstavlja rizik po zdravlje ljudi i životnu sredinu u skladu sa prinicima hemijskog lizinga i zelene hemije. Dobijeni plastifikator je okarakterisan primenom elementalne analize, FTIR, i NMR spektroskopije i određivanjem hidroksilnog i kiselinskog broja. Ispitivana su mehanička svojstva materijala dobijenih na bazi recikliranog PVC i plastifikatora iz PET-a prema standardnim metodama., The subject of this research is the production process of polyvinyl chloride (PVC) regranulate using a plasticizer synthesized from recycled poly(ethylene terephthalate) (PET). In this way, a plasticizer was synthesized that does not pose a risk to human health and the environment in accordance with the principles of chemical leasing and green chemistry. The obtained plasticizer was characterized using elemental analysis, FTIR, and NMR spectroscopy and determination of hydroxyl and acid number. The mechanical properties of materials obtained on the basis of recycled PVC and plasticizers from PET were tested according to standard methods.",
journal = "Tehnika",
title = "Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a, Testing of the mechanical properties of reggranulate PVC with the addition of plasticizer from waste PET",
volume = "78",
number = "4",
pages = "389-394",
doi = "10.5937/tehnika2304389V"
}

Vuksanović, M. M., Milošević, M., Knežević, N., Egelja, A., Janković-Mandić, L., Mladenović, I.,& Marinković, A.. (2023). Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a. in Tehnika, 78(4), 389-394.
https://doi.org/10.5937/tehnika2304389V

Vuksanović MM, Milošević M, Knežević N, Egelja A, Janković-Mandić L, Mladenović I, Marinković A. Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a. in Tehnika. 2023;78(4):389-394.
doi:10.5937/tehnika2304389V .

Vuksanović, Marija M., Milošević, Milena, Knežević, Nataša, Egelja, Adela, Janković-Mandić, Ljiljana, Mladenović, Ivana, Marinković, Aleksandar, "Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a" in Tehnika, 78, no. 4 (2023):389-394,
https://doi.org/10.5937/tehnika2304389V . .

TY  - JOUR
AU  - Salah Adeen Embirsh, Hifa
AU  - Stajčić, Ivana
AU  - Gržetić, Jelena
AU  - Mladenović, Ivana O.
AU  - Anđelković, Boban
AU  - Marinković, Aleksandar
AU  - Vuksanović, Marija M.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11638
AB  - This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol(PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained fromrice husk. The structural and morphological properties of the obtained particles, b-UPR, as well ascomposites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magneticresonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electronmicroscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanicalproperties of composites was supported by hardness modeling. Improvement of the tensile strengthof the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named“b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process appliedto the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR).The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of atable top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, aswell as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainablecomposites that are chemically synthesized from renewable sources is important from the aspect ofpreserving the environment and existing resources as well as the extending their life cycle.
T2  - Polymers
T1  - Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles
VL  - 15
IS  - 18
SP  - 3756
DO  - 10.3390/polym15183756
ER  - 

@article{
author = "Salah Adeen Embirsh, Hifa and Stajčić, Ivana and Gržetić, Jelena and Mladenović, Ivana O. and Anđelković, Boban and Marinković, Aleksandar and Vuksanović, Marija M.",
year = "2023",
abstract = "This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol(PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained fromrice husk. The structural and morphological properties of the obtained particles, b-UPR, as well ascomposites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magneticresonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electronmicroscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanicalproperties of composites was supported by hardness modeling. Improvement of the tensile strengthof the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named“b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process appliedto the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR).The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of atable top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, aswell as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainablecomposites that are chemically synthesized from renewable sources is important from the aspect ofpreserving the environment and existing resources as well as the extending their life cycle.",
journal = "Polymers",
title = "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles",
volume = "15",
number = "18",
pages = "3756",
doi = "10.3390/polym15183756"
}

Salah Adeen Embirsh, H., Stajčić, I., Gržetić, J., Mladenović, I. O., Anđelković, B., Marinković, A.,& Vuksanović, M. M.. (2023). Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers, 15(18), 3756.
https://doi.org/10.3390/polym15183756

Salah Adeen Embirsh H, Stajčić I, Gržetić J, Mladenović IO, Anđelković B, Marinković A, Vuksanović MM. Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers. 2023;15(18):3756.
doi:10.3390/polym15183756 .

Salah Adeen Embirsh, Hifa, Stajčić, Ivana, Gržetić, Jelena, Mladenović, Ivana O., Anđelković, Boban, Marinković, Aleksandar, Vuksanović, Marija M., "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles" in Polymers, 15, no. 18 (2023):3756,
https://doi.org/10.3390/polym15183756 . .

TY  - JOUR
AU  - Mladenović, Ivana O.
AU  - Vuksanović, Marija M.
AU  - Dimitrijević, Stevan P.
AU  - Vasilić, Rastko
AU  - Radojević, Vesna J.
AU  - Vasiljević-Radović, Dana G.
AU  - Nikolić, Nebojša D.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12396
AB  - Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.
T2  - Metals
T1  - Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
VL  - 13
IS  - 12
SP  - 1979
DO  - 10.3390/met13121979
ER  - 

@article{
author = "Mladenović, Ivana O. and Vuksanović, Marija M. and Dimitrijević, Stevan P. and Vasilić, Rastko and Radojević, Vesna J. and Vasiljević-Radović, Dana G. and Nikolić, Nebojša D.",
year = "2023",
abstract = "Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.",
journal = "Metals",
title = "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles",
volume = "13",
number = "12",
pages = "1979",
doi = "10.3390/met13121979"
}

Mladenović, I. O., Vuksanović, M. M., Dimitrijević, S. P., Vasilić, R., Radojević, V. J., Vasiljević-Radović, D. G.,& Nikolić, N. D.. (2023). Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals, 13(12), 1979.
https://doi.org/10.3390/met13121979

Mladenović IO, Vuksanović MM, Dimitrijević SP, Vasilić R, Radojević VJ, Vasiljević-Radović DG, Nikolić ND. Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals. 2023;13(12):1979.
doi:10.3390/met13121979 .

Mladenović, Ivana O., Vuksanović, Marija M., Dimitrijević, Stevan P., Vasilić, Rastko, Radojević, Vesna J., Vasiljević-Radović, Dana G., Nikolić, Nebojša D., "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles" in Metals, 13, no. 12 (2023):1979,
https://doi.org/10.3390/met13121979 . .

TY  - JOUR
AU  - Lučić, Milica
AU  - Potkonjak, Nebojša
AU  - Sredović Ignjatović, Ivana
AU  - Lević, Steva
AU  - Dajić-Stevanović, Zora
AU  - Kolašinac, Stefan
AU  - Belović, Miona
AU  - Torbica, Aleksandra
AU  - Zlatanović, Ivan
AU  - Pavlović, Vladimir
AU  - Onjia, Antonije
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11363
AB  - This study investigates the effects of ultrasound, in combination with chemical pretreatments, on the quality attributes (total phenolic and carotenoid content, antioxidant activity (2,2-Diphenyl-1-picrylhydrazyl assay (DPPH)), ferric-reducing ability (FRAP), CIE L* a* b* color, non-enzymatic browning, rehydration ratio, textural and morphological properties) of red pepper subjected to drying (hot air drying or freeze drying). The fractional factorial design was used to assess the impact of factors. The global Derringer desirability function was used to determine the optimal conditions for the best quality attributes of dried pepper. The drying method influenced total phenolic content, a* (redness), and initial rehydration ratio; pretreatment time significantly affected FRAP antiradical activity, a*, chroma and non-browning index, while pH-value had a significant effect on the texture of dried pepper. Non-enzymatic browning was reduced to 72.6%, while the DPPH antioxidant capacity of freeze-dried peppers was enhanced from 4.2% to 71.9%. Ultrasonic pretreatment led to changes in the pepper morphology, while potassium metabisulfite (KMS) was a more effective additive than citric acid.
T2  - Foods
T1  - Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum)
VL  - 12
IS  - 13
SP  - 2468
DO  - 10.3390/foods12132468
ER  - 

@article{
author = "Lučić, Milica and Potkonjak, Nebojša and Sredović Ignjatović, Ivana and Lević, Steva and Dajić-Stevanović, Zora and Kolašinac, Stefan and Belović, Miona and Torbica, Aleksandra and Zlatanović, Ivan and Pavlović, Vladimir and Onjia, Antonije",
year = "2023",
abstract = "This study investigates the effects of ultrasound, in combination with chemical pretreatments, on the quality attributes (total phenolic and carotenoid content, antioxidant activity (2,2-Diphenyl-1-picrylhydrazyl assay (DPPH)), ferric-reducing ability (FRAP), CIE L* a* b* color, non-enzymatic browning, rehydration ratio, textural and morphological properties) of red pepper subjected to drying (hot air drying or freeze drying). The fractional factorial design was used to assess the impact of factors. The global Derringer desirability function was used to determine the optimal conditions for the best quality attributes of dried pepper. The drying method influenced total phenolic content, a* (redness), and initial rehydration ratio; pretreatment time significantly affected FRAP antiradical activity, a*, chroma and non-browning index, while pH-value had a significant effect on the texture of dried pepper. Non-enzymatic browning was reduced to 72.6%, while the DPPH antioxidant capacity of freeze-dried peppers was enhanced from 4.2% to 71.9%. Ultrasonic pretreatment led to changes in the pepper morphology, while potassium metabisulfite (KMS) was a more effective additive than citric acid.",
journal = "Foods",
title = "Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum)",
volume = "12",
number = "13",
pages = "2468",
doi = "10.3390/foods12132468"
}

Lučić, M., Potkonjak, N., Sredović Ignjatović, I., Lević, S., Dajić-Stevanović, Z., Kolašinac, S., Belović, M., Torbica, A., Zlatanović, I., Pavlović, V.,& Onjia, A.. (2023). Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum). in Foods, 12(13), 2468.
https://doi.org/10.3390/foods12132468

Lučić M, Potkonjak N, Sredović Ignjatović I, Lević S, Dajić-Stevanović Z, Kolašinac S, Belović M, Torbica A, Zlatanović I, Pavlović V, Onjia A. Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum). in Foods. 2023;12(13):2468.
doi:10.3390/foods12132468 .

Lučić, Milica, Potkonjak, Nebojša, Sredović Ignjatović, Ivana, Lević, Steva, Dajić-Stevanović, Zora, Kolašinac, Stefan, Belović, Miona, Torbica, Aleksandra, Zlatanović, Ivan, Pavlović, Vladimir, Onjia, Antonije, "Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum)" in Foods, 12, no. 13 (2023):2468,
https://doi.org/10.3390/foods12132468 . .

TY  - JOUR
AU  - Radovanović, Lidija
AU  - Radovanović, Željko
AU  - Simović, Bojana
AU  - Vasić, Milica V.
AU  - Balanč, Bojana
AU  - Dapčević, Aleksandra
AU  - Dramićanin, Miroslav
AU  - Rogan, Jelena
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10873
AB  - A biphasic [Mn(dipya)(H2O)4](tpht)/{[Zn(dipya)(tpht)]·H2O}n com­plex material, I (dipya = 2,2’-dipyridylamine, tpht2– = dianion of terephthalatic acid) was synthesized by ligand exchange reaction and characterized by XRPD and FTIR spectroscopy. A ZnO/ZnMn2O4 composite, II, has been prepared via thermal decomposition of I in an air atmosphere at 450 °C. XRPD, FTIR and FESEM analyses of II revealed the simultaneous presence of spherical nano­particles of wurtzite ZnO and elongated nanoparticles of spinel ZnMn2O4. The specific surface area of II was determined by the BET method, whereas the volume and average size of the mesopores were calculated in accordance with the BJH method. The measurements of the mean size, polydispersity index and zeta potential showed colloidal instability of II. Two band gap values of 2.4 and 3.3 eV were determined using UV–Vis diffuse reflectance spectroscopy, while the measurements of photoluminescence revealed that II is active in the blue region of the visible spectrum. Testing of composite II as a pigmentary material showed that it can be used for the colouring of a ceramic glaze.
T2  - Journal of the Serbian Chemical Society
T1  - Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor: Scientific paper
VL  - 88
IS  - 3
DO  - 10.2298/JSC221102090R
ER  - 

@article{
author = "Radovanović, Lidija and Radovanović, Željko and Simović, Bojana and Vasić, Milica V. and Balanč, Bojana and Dapčević, Aleksandra and Dramićanin, Miroslav and Rogan, Jelena",
year = "2023",
abstract = "A biphasic [Mn(dipya)(H2O)4](tpht)/{[Zn(dipya)(tpht)]·H2O}n com­plex material, I (dipya = 2,2’-dipyridylamine, tpht2– = dianion of terephthalatic acid) was synthesized by ligand exchange reaction and characterized by XRPD and FTIR spectroscopy. A ZnO/ZnMn2O4 composite, II, has been prepared via thermal decomposition of I in an air atmosphere at 450 °C. XRPD, FTIR and FESEM analyses of II revealed the simultaneous presence of spherical nano­particles of wurtzite ZnO and elongated nanoparticles of spinel ZnMn2O4. The specific surface area of II was determined by the BET method, whereas the volume and average size of the mesopores were calculated in accordance with the BJH method. The measurements of the mean size, polydispersity index and zeta potential showed colloidal instability of II. Two band gap values of 2.4 and 3.3 eV were determined using UV–Vis diffuse reflectance spectroscopy, while the measurements of photoluminescence revealed that II is active in the blue region of the visible spectrum. Testing of composite II as a pigmentary material showed that it can be used for the colouring of a ceramic glaze.",
journal = "Journal of the Serbian Chemical Society",
title = "Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor: Scientific paper",
volume = "88",
number = "3",
doi = "10.2298/JSC221102090R"
}

Radovanović, L., Radovanović, Ž., Simović, B., Vasić, M. V., Balanč, B., Dapčević, A., Dramićanin, M.,& Rogan, J.. (2023). Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor: Scientific paper. in Journal of the Serbian Chemical Society, 88(3).
https://doi.org/10.2298/JSC221102090R

Radovanović L, Radovanović Ž, Simović B, Vasić MV, Balanč B, Dapčević A, Dramićanin M, Rogan J. Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor: Scientific paper. in Journal of the Serbian Chemical Society. 2023;88(3).
doi:10.2298/JSC221102090R .

Radovanović, Lidija, Radovanović, Željko, Simović, Bojana, Vasić, Milica V., Balanč, Bojana, Dapčević, Aleksandra, Dramićanin, Miroslav, Rogan, Jelena, "Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor: Scientific paper" in Journal of the Serbian Chemical Society, 88, no. 3 (2023),
https://doi.org/10.2298/JSC221102090R . .