SASA project [F-134]

Link to this page

SASA project [F-134]

Authors

Publications

Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants

Golubović, Aleksandar V.; Veljkovic, Ivana; Šćepanović, Maja; Grujić-Brojčin, Mirjana; Tomic, Natasa; Mijin, Dušan Ž.; Babić, Biljana M.

(2016)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Veljkovic, Ivana
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Tomic, Natasa
AU  - Mijin, Dušan Ž.
AU  - Babić, Biljana M.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1020
AB  - Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants
VL  - 22
IS  - 1
SP  - 65
EP  - 73
DO  - 10.2298/CICEQ150110020G
ER  - 
@article{
author = "Golubović, Aleksandar V. and Veljkovic, Ivana and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Tomic, Natasa and Mijin, Dušan Ž. and Babić, Biljana M.",
year = "2016",
abstract = "Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants",
volume = "22",
number = "1",
pages = "65-73",
doi = "10.2298/CICEQ150110020G"
}
Golubović, A. V., Veljkovic, I., Šćepanović, M., Grujić-Brojčin, M., Tomic, N., Mijin, D. Ž.,& Babić, B. M.. (2016). Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 22(1), 65-73.
https://doi.org/10.2298/CICEQ150110020G
Golubović AV, Veljkovic I, Šćepanović M, Grujić-Brojčin M, Tomic N, Mijin DŽ, Babić BM. Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2016;22(1):65-73.
doi:10.2298/CICEQ150110020G .
Golubović, Aleksandar V., Veljkovic, Ivana, Šćepanović, Maja, Grujić-Brojčin, Mirjana, Tomic, Natasa, Mijin, Dušan Ž., Babić, Biljana M., "Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 22, no. 1 (2016):65-73,
https://doi.org/10.2298/CICEQ150110020G . .
2
3
3

Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route

Tomić, Nataša; Grujić-Brojčin, Mirjana; Finčur, Nina L.; Abramović, Biljana F.; Simović, Bojana; Krstić, Jugoslav B.; Matović, Branko; Šćepanović, Maja

(Elsevier, 2015)

TY  - JOUR
AU  - Tomić, Nataša
AU  - Grujić-Brojčin, Mirjana
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Simović, Bojana
AU  - Krstić, Jugoslav B.
AU  - Matović, Branko
AU  - Šćepanović, Maja
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/821
AB  - Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route
VL  - 163
SP  - 518
EP  - 528
DO  - 10.1016/j.matchemphys.2015.08.008
ER  - 
@article{
author = "Tomić, Nataša and Grujić-Brojčin, Mirjana and Finčur, Nina L. and Abramović, Biljana F. and Simović, Bojana and Krstić, Jugoslav B. and Matović, Branko and Šćepanović, Maja",
year = "2015",
abstract = "Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route",
volume = "163",
pages = "518-528",
doi = "10.1016/j.matchemphys.2015.08.008"
}
Tomić, N., Grujić-Brojčin, M., Finčur, N. L., Abramović, B. F., Simović, B., Krstić, J. B., Matović, B.,& Šćepanović, M.. (2015). Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics
Elsevier., 163, 518-528.
https://doi.org/10.1016/j.matchemphys.2015.08.008
Tomić N, Grujić-Brojčin M, Finčur NL, Abramović BF, Simović B, Krstić JB, Matović B, Šćepanović M. Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics. 2015;163:518-528.
doi:10.1016/j.matchemphys.2015.08.008 .
Tomić, Nataša, Grujić-Brojčin, Mirjana, Finčur, Nina L., Abramović, Biljana F., Simović, Bojana, Krstić, Jugoslav B., Matović, Branko, Šćepanović, Maja, "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route" in Materials Chemistry and Physics, 163 (2015):518-528,
https://doi.org/10.1016/j.matchemphys.2015.08.008 . .
29
30
30