Magnetic and radionuclide labeled nanostructured materials for medical applications

Link to this page

info:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/45015/RS//

Magnetic and radionuclide labeled nanostructured materials for medical applications (en)
Магнетни и радионуклидима обележени наноструктурни материјали за примене у медицини (sr)
Magnetni i radionuklidima obeleženi nanostrukturni materijali za primene u medicini (sr_RS)
Authors

Publications

Auto-combustion synthesis as a method for preparing BiFeO3 powders and flexible BiFeO3/PVDF films with improved magnetic properties. Influence of doping ion position, size and valence on electric properties

Ilić, Nikola; Teixeira, Guilhermina F.; Bobić, Jelena; Spasojević, Vojislav; Džunuzović, Adis; Petrović, Mirjana Vijatović; Zaghete, Maria Ap.; Stojanović, Biljana

(2022)

TY  - JOUR
AU  - Ilić, Nikola
AU  - Teixeira, Guilhermina F.
AU  - Bobić, Jelena
AU  - Spasojević, Vojislav
AU  - Džunuzović, Adis
AU  - Petrović, Mirjana Vijatović
AU  - Zaghete, Maria Ap.
AU  - Stojanović, Biljana
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10211
AB  - Bismuth ferrite (BiFeO3) powders were synthesized by auto-combustion method using glycine as a fuel. Doping ions of different valence were used to study the influence on electrical conductivity and ferroelectric properties. Powders were mixed and hot-pressed with α-PVDF to form flexible composite samples. Composites endured significantly higher electrical fields with lower leakage and retained the weak ferromagnetism present in powders. Dielectric properties were improved by doping with Zr4+, Y3+ and Ca2+ as well as the electrical resistivity. Flexible composites exhibited improved electrical resistivity and modified conduction mechanism. Relatively high magnetization of powders completely originates from magnetite particles formed during the combustion, while sintered samples exhibited typical antiferromagnetic behaviour.
T2  - Materials Science and Engineering: B
T1  - Auto-combustion synthesis as a method for preparing BiFeO3 powders and flexible BiFeO3/PVDF films with improved magnetic properties. Influence of doping ion position, size and valence on electric properties
VL  - 280
SP  - 115686
DO  - 10.1016/j.mseb.2022.115686
ER  - 
@article{
author = "Ilić, Nikola and Teixeira, Guilhermina F. and Bobić, Jelena and Spasojević, Vojislav and Džunuzović, Adis and Petrović, Mirjana Vijatović and Zaghete, Maria Ap. and Stojanović, Biljana",
year = "2022",
abstract = "Bismuth ferrite (BiFeO3) powders were synthesized by auto-combustion method using glycine as a fuel. Doping ions of different valence were used to study the influence on electrical conductivity and ferroelectric properties. Powders were mixed and hot-pressed with α-PVDF to form flexible composite samples. Composites endured significantly higher electrical fields with lower leakage and retained the weak ferromagnetism present in powders. Dielectric properties were improved by doping with Zr4+, Y3+ and Ca2+ as well as the electrical resistivity. Flexible composites exhibited improved electrical resistivity and modified conduction mechanism. Relatively high magnetization of powders completely originates from magnetite particles formed during the combustion, while sintered samples exhibited typical antiferromagnetic behaviour.",
journal = "Materials Science and Engineering: B",
title = "Auto-combustion synthesis as a method for preparing BiFeO3 powders and flexible BiFeO3/PVDF films with improved magnetic properties. Influence of doping ion position, size and valence on electric properties",
volume = "280",
pages = "115686",
doi = "10.1016/j.mseb.2022.115686"
}
Ilić, N., Teixeira, G. F., Bobić, J., Spasojević, V., Džunuzović, A., Petrović, M. V., Zaghete, M. Ap.,& Stojanović, B.. (2022). Auto-combustion synthesis as a method for preparing BiFeO3 powders and flexible BiFeO3/PVDF films with improved magnetic properties. Influence of doping ion position, size and valence on electric properties. in Materials Science and Engineering: B, 280, 115686.
https://doi.org/10.1016/j.mseb.2022.115686
Ilić N, Teixeira GF, Bobić J, Spasojević V, Džunuzović A, Petrović MV, Zaghete MA, Stojanović B. Auto-combustion synthesis as a method for preparing BiFeO3 powders and flexible BiFeO3/PVDF films with improved magnetic properties. Influence of doping ion position, size and valence on electric properties. in Materials Science and Engineering: B. 2022;280:115686.
doi:10.1016/j.mseb.2022.115686 .
Ilić, Nikola, Teixeira, Guilhermina F., Bobić, Jelena, Spasojević, Vojislav, Džunuzović, Adis, Petrović, Mirjana Vijatović, Zaghete, Maria Ap., Stojanović, Biljana, "Auto-combustion synthesis as a method for preparing BiFeO3 powders and flexible BiFeO3/PVDF films with improved magnetic properties. Influence of doping ion position, size and valence on electric properties" in Materials Science and Engineering: B, 280 (2022):115686,
https://doi.org/10.1016/j.mseb.2022.115686 . .

Search for high temperature memory effects in magnetic nanoparticles

Perović, Marija M.; Bošković, Marko; Kusigerski, Vladan B.; Jagličić, Zvonko; Blanuša, Jovan; Spasojević, Vojislav; Pizurova, Nadežda; Schneeweiss, Oldřich B.

(2021)

TY  - JOUR
AU  - Perović, Marija M.
AU  - Bošković, Marko
AU  - Kusigerski, Vladan B.
AU  - Jagličić, Zvonko
AU  - Blanuša, Jovan
AU  - Spasojević, Vojislav
AU  - Pizurova, Nadežda
AU  - Schneeweiss, Oldřich B.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9674
AB  - Nanoparticle materials have become a promising candidate for a new kind of storage media based on thermally induced memory effects due to the possibility to tailor their magnetic properties and behaviour. In this study, we have investigated whether the magnetic memory effects could appear at high, industry accessible temperatures including the possibility of thermal data inscription. Investigated iron oxide nanoparticles were synthesized by poliol method, which has been modified in order to allow control of particle agglomeration and consequently magnetic properties. Structure, morphology and the degree of nanoparticle agglomeration were studied by X-Ray diffraction, Transmission Electron Microscopy and Dynamic Light Scattering techniques, while magnetic properties as well as memory effects were measured on a commercial SQUID-based magnetometer. Results of the study confirmed that in super spin glass magnetite nanoparticles, magnetic memory effects can be observed up to 200 K which represents much higher temperatures in comparison to those achieved in spin glasses and other glassy materials. Procedures of writing and reading (inscribing and retrieving) of digital information in such a material were demonstrated and discussed in details.
T2  - Journal of Alloys and Compounds
T1  - Search for high temperature memory effects in magnetic nanoparticles
VL  - 855
SP  - 157523
DO  - 10.1016/j.jallcom.2020.157523
ER  - 
@article{
author = "Perović, Marija M. and Bošković, Marko and Kusigerski, Vladan B. and Jagličić, Zvonko and Blanuša, Jovan and Spasojević, Vojislav and Pizurova, Nadežda and Schneeweiss, Oldřich B.",
year = "2021",
abstract = "Nanoparticle materials have become a promising candidate for a new kind of storage media based on thermally induced memory effects due to the possibility to tailor their magnetic properties and behaviour. In this study, we have investigated whether the magnetic memory effects could appear at high, industry accessible temperatures including the possibility of thermal data inscription. Investigated iron oxide nanoparticles were synthesized by poliol method, which has been modified in order to allow control of particle agglomeration and consequently magnetic properties. Structure, morphology and the degree of nanoparticle agglomeration were studied by X-Ray diffraction, Transmission Electron Microscopy and Dynamic Light Scattering techniques, while magnetic properties as well as memory effects were measured on a commercial SQUID-based magnetometer. Results of the study confirmed that in super spin glass magnetite nanoparticles, magnetic memory effects can be observed up to 200 K which represents much higher temperatures in comparison to those achieved in spin glasses and other glassy materials. Procedures of writing and reading (inscribing and retrieving) of digital information in such a material were demonstrated and discussed in details.",
journal = "Journal of Alloys and Compounds",
title = "Search for high temperature memory effects in magnetic nanoparticles",
volume = "855",
pages = "157523",
doi = "10.1016/j.jallcom.2020.157523"
}
Perović, M. M., Bošković, M., Kusigerski, V. B., Jagličić, Z., Blanuša, J., Spasojević, V., Pizurova, N.,& Schneeweiss, O. B.. (2021). Search for high temperature memory effects in magnetic nanoparticles. in Journal of Alloys and Compounds, 855, 157523.
https://doi.org/10.1016/j.jallcom.2020.157523
Perović MM, Bošković M, Kusigerski VB, Jagličić Z, Blanuša J, Spasojević V, Pizurova N, Schneeweiss OB. Search for high temperature memory effects in magnetic nanoparticles. in Journal of Alloys and Compounds. 2021;855:157523.
doi:10.1016/j.jallcom.2020.157523 .
Perović, Marija M., Bošković, Marko, Kusigerski, Vladan B., Jagličić, Zvonko, Blanuša, Jovan, Spasojević, Vojislav, Pizurova, Nadežda, Schneeweiss, Oldřich B., "Search for high temperature memory effects in magnetic nanoparticles" in Journal of Alloys and Compounds, 855 (2021):157523,
https://doi.org/10.1016/j.jallcom.2020.157523 . .

Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid

Mravik, Željko; Bajuk-Bogdanović, Danica V.; Mraković, Ana Đ.; Vukosavljević, Ljubiša; Trajić, Ivan; Kovač, Janez; Peruško, Davor; Gavrilov, Nemanja; Jovanović, Zoran M.

(2021)

TY  - JOUR
AU  - Mravik, Željko
AU  - Bajuk-Bogdanović, Danica V.
AU  - Mraković, Ana Đ.
AU  - Vukosavljević, Ljubiša
AU  - Trajić, Ivan
AU  - Kovač, Janez
AU  - Peruško, Davor
AU  - Gavrilov, Nemanja
AU  - Jovanović, Zoran M.
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9150
AB  - In recent years polyoxometalates (POMs) have attracted significant research interest due to versatile properties. These properties are determined by the size, structure and elemental composition of POMs and hence play an important role in their application. In the present study, the ion beam irradiation (10 keV C+ ions, 5 × 1014–2.5 × 1015 ions/cm2) has been utilized for modification of physicochemical properties of 120 nm-thick layer of 12-tungstophosphoric acid (WPA). Scanning electron microscopy analysis of irradiated films showed change of morphology i.e. an increase of WPA grain size with irradiation and coalescence of grains at the highest fluence. This was accompanied by structural changes. Attenuated total reflectance Fourier transform infrared analysis revealed that vibration bands of Keggin anion became less pronounced as fluence increased, while Raman spectra appeared as strongly modified. The effect of irradiation with 1.25 × 1015 ions/cm2 on the structure of WPA was similar to the effect of thermal treatment at 600 °C. Irradiation of WPA led to decrease of the band gap (from 4.07 to 3.92 eV), which was correlated to transformation Keggin anions into a network of WO6 octahedra and PO4 tetrahedra. This is in line with increased number of W=Od bonds observed by UV–Visible diffuse reflectance spectroscopy. Beside transformation to bronzes a reduction of WPA was observed by X-ray Photoelectron Spectroscopy (shift to lower binding energy) and Raman methods, whereas the Raman spectra of irradiated samples were similar to heteropoly blue. The electrochemical properties of irradiated WPA were also assessed. Cyclic voltammetry measurements showed that at up to 1.25 × 1015 ions/cm2 lithiation capacity of WPA increases and activity for hydrogen evolution reaction (HER) improves. The highest fluence caused interconnection of WO6 octahedra, closing of lithiation pathways and decrease in the number of active sites for HER. Our results provide a novel insight into the effects of ion beam irradiation on WPA and demonstrate high potential for tuning of physicochemical properties of POMs that are relevant in wide range of applications. © 2021 Elsevier Ltd
T2  - Radiation Physics and Chemistry
T1  - Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid
VL  - 183
SP  - 109422
DO  - 10.1016/j.radphyschem.2021.109422
ER  - 
@article{
author = "Mravik, Željko and Bajuk-Bogdanović, Danica V. and Mraković, Ana Đ. and Vukosavljević, Ljubiša and Trajić, Ivan and Kovač, Janez and Peruško, Davor and Gavrilov, Nemanja and Jovanović, Zoran M.",
year = "2021",
abstract = "In recent years polyoxometalates (POMs) have attracted significant research interest due to versatile properties. These properties are determined by the size, structure and elemental composition of POMs and hence play an important role in their application. In the present study, the ion beam irradiation (10 keV C+ ions, 5 × 1014–2.5 × 1015 ions/cm2) has been utilized for modification of physicochemical properties of 120 nm-thick layer of 12-tungstophosphoric acid (WPA). Scanning electron microscopy analysis of irradiated films showed change of morphology i.e. an increase of WPA grain size with irradiation and coalescence of grains at the highest fluence. This was accompanied by structural changes. Attenuated total reflectance Fourier transform infrared analysis revealed that vibration bands of Keggin anion became less pronounced as fluence increased, while Raman spectra appeared as strongly modified. The effect of irradiation with 1.25 × 1015 ions/cm2 on the structure of WPA was similar to the effect of thermal treatment at 600 °C. Irradiation of WPA led to decrease of the band gap (from 4.07 to 3.92 eV), which was correlated to transformation Keggin anions into a network of WO6 octahedra and PO4 tetrahedra. This is in line with increased number of W=Od bonds observed by UV–Visible diffuse reflectance spectroscopy. Beside transformation to bronzes a reduction of WPA was observed by X-ray Photoelectron Spectroscopy (shift to lower binding energy) and Raman methods, whereas the Raman spectra of irradiated samples were similar to heteropoly blue. The electrochemical properties of irradiated WPA were also assessed. Cyclic voltammetry measurements showed that at up to 1.25 × 1015 ions/cm2 lithiation capacity of WPA increases and activity for hydrogen evolution reaction (HER) improves. The highest fluence caused interconnection of WO6 octahedra, closing of lithiation pathways and decrease in the number of active sites for HER. Our results provide a novel insight into the effects of ion beam irradiation on WPA and demonstrate high potential for tuning of physicochemical properties of POMs that are relevant in wide range of applications. © 2021 Elsevier Ltd",
journal = "Radiation Physics and Chemistry",
title = "Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid",
volume = "183",
pages = "109422",
doi = "10.1016/j.radphyschem.2021.109422"
}
Mravik, Ž., Bajuk-Bogdanović, D. V., Mraković, A. Đ., Vukosavljević, L., Trajić, I., Kovač, J., Peruško, D., Gavrilov, N.,& Jovanović, Z. M.. (2021). Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid. in Radiation Physics and Chemistry, 183, 109422.
https://doi.org/10.1016/j.radphyschem.2021.109422
Mravik Ž, Bajuk-Bogdanović DV, Mraković AĐ, Vukosavljević L, Trajić I, Kovač J, Peruško D, Gavrilov N, Jovanović ZM. Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid. in Radiation Physics and Chemistry. 2021;183:109422.
doi:10.1016/j.radphyschem.2021.109422 .
Mravik, Željko, Bajuk-Bogdanović, Danica V., Mraković, Ana Đ., Vukosavljević, Ljubiša, Trajić, Ivan, Kovač, Janez, Peruško, Davor, Gavrilov, Nemanja, Jovanović, Zoran M., "Structural and electrochemical properties of carbon ion beam irradiated 12-tungstophosphoric acid" in Radiation Physics and Chemistry, 183 (2021):109422,
https://doi.org/10.1016/j.radphyschem.2021.109422 . .

Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders

Maksimović, Vesna; Kusigerski, Vladan; Stoiljković, Milovan; Maletaškić, Jelena; Nikolić, Nebojša D.

(2020)

TY  - JOUR
AU  - Maksimović, Vesna
AU  - Kusigerski, Vladan
AU  - Stoiljković, Milovan
AU  - Maletaškić, Jelena
AU  - Nikolić, Nebojša D.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8950
AB  - Nickel−cobalt (Ni−Co) alloy powders were produced galvanostatically by using sulphate electrolytes withvarious ratios of Ni2+/Co2+ (mole ratios). The morphology, phase structure, chemical composition and magneticproperties were examined by scanning electron microscope (SEM), X-ray diffractometer (XRD), atomic emissionspectrometer (AES), and SQUID-based magnetometer, respectively. Morphology of the particles changed fromcauliflower-like and dendritic to coral-like and spongy-like ones with increasing Ni2+/Co2+ ratio from 0.25 to 4.0. XRDanalysis of the Ni−Co powders revealed that the decrease of Ni2+/Co2+ ratios (the increase of Co content) caused achange of structure from face centered cubic (FCC) obtained for the ratios of 4.0, 1.5 and 0.67 to a mixture of FCC andhexagonal closed-packed (HCP) phases for the ratio of 0.25. The increasing content of nickel led to change ofmechanism of electrolysis from irregular (up to ~40 wt.% Ni in the electrolytes) to close to equilibrium (between~40 and 60 wt.% Ni in the electrolytes) and anomalous co-deposition (over 60 wt.% Ni in the electrolytes) type. All ofthe obtained Ni−Co alloy samples behaved as soft magnetic materials while their magnetic parameters showedimmediate composition dependence since both coercivity and saturation magnetization almost linearly increased withincrease of the Co content.
T2  - Transactions of Nonferrows Metals Society of China
T1  - Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders
VL  - 30
IS  - 4
SP  - 1046
EP  - 1057
DO  - 10.1016/S1003-6326(20)65276-1
ER  - 
@article{
author = "Maksimović, Vesna and Kusigerski, Vladan and Stoiljković, Milovan and Maletaškić, Jelena and Nikolić, Nebojša D.",
year = "2020",
abstract = "Nickel−cobalt (Ni−Co) alloy powders were produced galvanostatically by using sulphate electrolytes withvarious ratios of Ni2+/Co2+ (mole ratios). The morphology, phase structure, chemical composition and magneticproperties were examined by scanning electron microscope (SEM), X-ray diffractometer (XRD), atomic emissionspectrometer (AES), and SQUID-based magnetometer, respectively. Morphology of the particles changed fromcauliflower-like and dendritic to coral-like and spongy-like ones with increasing Ni2+/Co2+ ratio from 0.25 to 4.0. XRDanalysis of the Ni−Co powders revealed that the decrease of Ni2+/Co2+ ratios (the increase of Co content) caused achange of structure from face centered cubic (FCC) obtained for the ratios of 4.0, 1.5 and 0.67 to a mixture of FCC andhexagonal closed-packed (HCP) phases for the ratio of 0.25. The increasing content of nickel led to change ofmechanism of electrolysis from irregular (up to ~40 wt.% Ni in the electrolytes) to close to equilibrium (between~40 and 60 wt.% Ni in the electrolytes) and anomalous co-deposition (over 60 wt.% Ni in the electrolytes) type. All ofthe obtained Ni−Co alloy samples behaved as soft magnetic materials while their magnetic parameters showedimmediate composition dependence since both coercivity and saturation magnetization almost linearly increased withincrease of the Co content.",
journal = "Transactions of Nonferrows Metals Society of China",
title = "Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders",
volume = "30",
number = "4",
pages = "1046-1057",
doi = "10.1016/S1003-6326(20)65276-1"
}
Maksimović, V., Kusigerski, V., Stoiljković, M., Maletaškić, J.,& Nikolić, N. D.. (2020). Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders. in Transactions of Nonferrows Metals Society of China, 30(4), 1046-1057.
https://doi.org/10.1016/S1003-6326(20)65276-1
Maksimović V, Kusigerski V, Stoiljković M, Maletaškić J, Nikolić ND. Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders. in Transactions of Nonferrows Metals Society of China. 2020;30(4):1046-1057.
doi:10.1016/S1003-6326(20)65276-1 .
Maksimović, Vesna, Kusigerski, Vladan, Stoiljković, Milovan, Maletaškić, Jelena, Nikolić, Nebojša D., "Influence of Ni2+/Co2+ ratio in electrolyte on morphology, structure and magnetic properties of electrolytically produced Ni−Co alloy powders" in Transactions of Nonferrows Metals Society of China, 30, no. 4 (2020):1046-1057,
https://doi.org/10.1016/S1003-6326(20)65276-1 . .

Surface-induced reversal of a phase transformation for the synthesis of ε-Fe2O3 nanoparticles with high coercivity

Tadić, Marin; Milošević, Irena; Kralj, Slavko; Hanžel, Darko; Barudžija, Tanja; Motte, Laurence; Makovec, Darko

(2020)

TY  - JOUR
AU  - Tadić, Marin
AU  - Milošević, Irena
AU  - Kralj, Slavko
AU  - Hanžel, Darko
AU  - Barudžija, Tanja
AU  - Motte, Laurence
AU  - Makovec, Darko
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8824
AB  - A metastable ε-polymorph of iron(III) oxide (ε-Fe2O3) is a very attractive material from the technological, engineering, and scientific points of view. In comparison with other iron oxides, it is characterized by unusual magnetic properties and a giant coercivity of ~20 kOe, which is the largest value among metal oxides. The routine method of ε-Fe2O3 formation is based on the thermal annealing of maghemite (γ-Fe2O3) nanoparticles confined in a silica matrix where the ε-Fe2O3 appears as an intermediate phase between the maghemite and an α-polymorph (α-Fe2O3) hematite (γ→ε→α pathway). In this study, it is demonstrated that the ε→α transformation can be reversed when hematite nanoparticles with an anisotropic hollow morphology are annealed above 600 °C. The observed reversal of the phase stability is explained in terms of an increased nanoparticle surface area and surface energy related to the hollow structure. This study demonstrates the applicability of surface-induced phase transformation to stabilize and control ε-Fe2O3 nanostructures with anisotropic shape and high coercivity ~1600 kA/m that is one of the key properties of functional magnetic materials for information processing and storage. The understanding of ε-Fe2O3 formation mechanism can provide a new viewpoint and guidance for designing metastable polymorphs and applicative properties. © 2020 Acta Materialia Inc.
T2  - Acta Materialia
T1  - Surface-induced reversal of a phase transformation for the synthesis of ε-Fe2O3 nanoparticles with high coercivity
VL  - 188
SP  - 16
EP  - 22
DO  - 10.1016/j.actamat.2020.01.058
ER  - 
@article{
author = "Tadić, Marin and Milošević, Irena and Kralj, Slavko and Hanžel, Darko and Barudžija, Tanja and Motte, Laurence and Makovec, Darko",
year = "2020",
abstract = "A metastable ε-polymorph of iron(III) oxide (ε-Fe2O3) is a very attractive material from the technological, engineering, and scientific points of view. In comparison with other iron oxides, it is characterized by unusual magnetic properties and a giant coercivity of ~20 kOe, which is the largest value among metal oxides. The routine method of ε-Fe2O3 formation is based on the thermal annealing of maghemite (γ-Fe2O3) nanoparticles confined in a silica matrix where the ε-Fe2O3 appears as an intermediate phase between the maghemite and an α-polymorph (α-Fe2O3) hematite (γ→ε→α pathway). In this study, it is demonstrated that the ε→α transformation can be reversed when hematite nanoparticles with an anisotropic hollow morphology are annealed above 600 °C. The observed reversal of the phase stability is explained in terms of an increased nanoparticle surface area and surface energy related to the hollow structure. This study demonstrates the applicability of surface-induced phase transformation to stabilize and control ε-Fe2O3 nanostructures with anisotropic shape and high coercivity ~1600 kA/m that is one of the key properties of functional magnetic materials for information processing and storage. The understanding of ε-Fe2O3 formation mechanism can provide a new viewpoint and guidance for designing metastable polymorphs and applicative properties. © 2020 Acta Materialia Inc.",
journal = "Acta Materialia",
title = "Surface-induced reversal of a phase transformation for the synthesis of ε-Fe2O3 nanoparticles with high coercivity",
volume = "188",
pages = "16-22",
doi = "10.1016/j.actamat.2020.01.058"
}
Tadić, M., Milošević, I., Kralj, S., Hanžel, D., Barudžija, T., Motte, L.,& Makovec, D.. (2020). Surface-induced reversal of a phase transformation for the synthesis of ε-Fe2O3 nanoparticles with high coercivity. in Acta Materialia, 188, 16-22.
https://doi.org/10.1016/j.actamat.2020.01.058
Tadić M, Milošević I, Kralj S, Hanžel D, Barudžija T, Motte L, Makovec D. Surface-induced reversal of a phase transformation for the synthesis of ε-Fe2O3 nanoparticles with high coercivity. in Acta Materialia. 2020;188:16-22.
doi:10.1016/j.actamat.2020.01.058 .
Tadić, Marin, Milošević, Irena, Kralj, Slavko, Hanžel, Darko, Barudžija, Tanja, Motte, Laurence, Makovec, Darko, "Surface-induced reversal of a phase transformation for the synthesis of ε-Fe2O3 nanoparticles with high coercivity" in Acta Materialia, 188 (2020):16-22,
https://doi.org/10.1016/j.actamat.2020.01.058 . .
2
19
12
17

Boron-doped diamond electrode as efficient sensing platform for simultaneous quantification of mefenamic acid and indomethacin

Petković, Branka B.; Ognjanović, Miloš; Krstić, Milena P.; Stanković, Vesna; Babincev, Ljiljana; Pergal, Marija V.; Stanković, Dalibor M.

(2020)

TY  - JOUR
AU  - Petković, Branka B.
AU  - Ognjanović, Miloš
AU  - Krstić, Milena P.
AU  - Stanković, Vesna
AU  - Babincev, Ljiljana
AU  - Pergal, Marija V.
AU  - Stanković, Dalibor M.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8846
AB  - Mefenamic acid and indomethacin, medicaments belonging to the group of non-steroidal anti-inflammatory agents, were determined separately and simultaneously at anodically prepared BDDE. Differential pulse voltammetry was used to establish simple and fast analytical procedure based on electrooxidation of mefenamic acid at 0.6 V and indomethacin at 1.0 V (and 1.1 V). At optimal conditions, it was suitable for highly sensitive and selective determination of these compounds with LODs comparable to previously reported modified electrodes. Additionally, considering the importance of these compounds, we proposed precise and accurate quantification of these species based on green and simple pre-treatable electrochemical sensor. The effect of interfering agents (tablet ingredients and vitamins) was appeared to be negligibly confirming a favourable selectivity of the method. The proposed method was analytically applied by simultaneously determining mefenamic acid and indomethacin in pharmaceutical formulations. © 2020 Elsevier B.V.
T2  - Diamond and Related Materials
T1  - Boron-doped diamond electrode as efficient sensing platform for simultaneous quantification of mefenamic acid and indomethacin
VL  - 105
SP  - 107785
DO  - 10.1016/j.diamond.2020.107785
ER  - 
@article{
author = "Petković, Branka B. and Ognjanović, Miloš and Krstić, Milena P. and Stanković, Vesna and Babincev, Ljiljana and Pergal, Marija V. and Stanković, Dalibor M.",
year = "2020",
abstract = "Mefenamic acid and indomethacin, medicaments belonging to the group of non-steroidal anti-inflammatory agents, were determined separately and simultaneously at anodically prepared BDDE. Differential pulse voltammetry was used to establish simple and fast analytical procedure based on electrooxidation of mefenamic acid at 0.6 V and indomethacin at 1.0 V (and 1.1 V). At optimal conditions, it was suitable for highly sensitive and selective determination of these compounds with LODs comparable to previously reported modified electrodes. Additionally, considering the importance of these compounds, we proposed precise and accurate quantification of these species based on green and simple pre-treatable electrochemical sensor. The effect of interfering agents (tablet ingredients and vitamins) was appeared to be negligibly confirming a favourable selectivity of the method. The proposed method was analytically applied by simultaneously determining mefenamic acid and indomethacin in pharmaceutical formulations. © 2020 Elsevier B.V.",
journal = "Diamond and Related Materials",
title = "Boron-doped diamond electrode as efficient sensing platform for simultaneous quantification of mefenamic acid and indomethacin",
volume = "105",
pages = "107785",
doi = "10.1016/j.diamond.2020.107785"
}
Petković, B. B., Ognjanović, M., Krstić, M. P., Stanković, V., Babincev, L., Pergal, M. V.,& Stanković, D. M.. (2020). Boron-doped diamond electrode as efficient sensing platform for simultaneous quantification of mefenamic acid and indomethacin. in Diamond and Related Materials, 105, 107785.
https://doi.org/10.1016/j.diamond.2020.107785
Petković BB, Ognjanović M, Krstić MP, Stanković V, Babincev L, Pergal MV, Stanković DM. Boron-doped diamond electrode as efficient sensing platform for simultaneous quantification of mefenamic acid and indomethacin. in Diamond and Related Materials. 2020;105:107785.
doi:10.1016/j.diamond.2020.107785 .
Petković, Branka B., Ognjanović, Miloš, Krstić, Milena P., Stanković, Vesna, Babincev, Ljiljana, Pergal, Marija V., Stanković, Dalibor M., "Boron-doped diamond electrode as efficient sensing platform for simultaneous quantification of mefenamic acid and indomethacin" in Diamond and Related Materials, 105 (2020):107785,
https://doi.org/10.1016/j.diamond.2020.107785 . .
15
12
14

Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods

Barudžija, Tanja; Perović, Marija M.; Bošković, Marko; Cvjetićanin, Nikola; Gyergyek, Sašo; Mitrić, Miodrag

(2020)

TY  - JOUR
AU  - Barudžija, Tanja
AU  - Perović, Marija M.
AU  - Bošković, Marko
AU  - Cvjetićanin, Nikola
AU  - Gyergyek, Sašo
AU  - Mitrić, Miodrag
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8743
AB  - Memory effect due to spin-glass state below about 20 K has been illustrated in the hollandite-type α-KxMnO2 monocrystalline nanorods by systematic magnetization measurements including temperature- and time-dependent magnetization curves in low fields. In this work, we succeeded in writing, reading, and deleting 8-bits digital information in the investigated system. These results show that α-KxMnO2 is a good candidate material for a thermal memory cell. The phenomenological droplet model was used in the description of the observed memory effect, whose origin in α-KxMnO2 is associated with bulk properties, doping and frustration. © 2019 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods
VL  - 820
SP  - 153406
DO  - 10.1016/j.jallcom.2019.153406
ER  - 
@article{
author = "Barudžija, Tanja and Perović, Marija M. and Bošković, Marko and Cvjetićanin, Nikola and Gyergyek, Sašo and Mitrić, Miodrag",
year = "2020",
abstract = "Memory effect due to spin-glass state below about 20 K has been illustrated in the hollandite-type α-KxMnO2 monocrystalline nanorods by systematic magnetization measurements including temperature- and time-dependent magnetization curves in low fields. In this work, we succeeded in writing, reading, and deleting 8-bits digital information in the investigated system. These results show that α-KxMnO2 is a good candidate material for a thermal memory cell. The phenomenological droplet model was used in the description of the observed memory effect, whose origin in α-KxMnO2 is associated with bulk properties, doping and frustration. © 2019 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods",
volume = "820",
pages = "153406",
doi = "10.1016/j.jallcom.2019.153406"
}
Barudžija, T., Perović, M. M., Bošković, M., Cvjetićanin, N., Gyergyek, S.,& Mitrić, M.. (2020). Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods. in Journal of Alloys and Compounds, 820, 153406.
https://doi.org/10.1016/j.jallcom.2019.153406
Barudžija T, Perović MM, Bošković M, Cvjetićanin N, Gyergyek S, Mitrić M. Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods. in Journal of Alloys and Compounds. 2020;820:153406.
doi:10.1016/j.jallcom.2019.153406 .
Barudžija, Tanja, Perović, Marija M., Bošković, Marko, Cvjetićanin, Nikola, Gyergyek, Sašo, Mitrić, Miodrag, "Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods" in Journal of Alloys and Compounds, 820 (2020):153406,
https://doi.org/10.1016/j.jallcom.2019.153406 . .
3
2
3

Optimization of the radiolabelling method for improved in vitro and in vivo stability of 90Y-albumin microspheres

Vukadinović, Aleksandar; Janković, Drina; Radović, Magdalena; Milanović, Zorana; Mirković, Marija D.; Stanković, Dragana; Vranješ-Đurić, Sanja

(2020)

TY  - JOUR
AU  - Vukadinović, Aleksandar
AU  - Janković, Drina
AU  - Radović, Magdalena
AU  - Milanović, Zorana
AU  - Mirković, Marija D.
AU  - Stanković, Dragana
AU  - Vranješ-Đurić, Sanja
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8652
AB  - Biologically stable 90Y-labelled albumin microspheres (AMS) were developed by optimizing the process of their preparation. Three formulations of 90Y-AMS were initially prepared with high radiolabelling yield but depending on the step when the radionuclide 90Y and DTPA chelator were added, radiolabelled microspheres with different in vitro and in vivo stability were obtained. DTPA was proved as a useful chelating agent that tightly links radionuclide 90Y to albumin. Also, AMS radiolabelled via DTPA during preparation and before microspheres stabilization, showed significant in vitro and in vivo stability ready for the potential use in selective internal radiation therapy. © 2019 Elsevier Ltd
T2  - Applied Radiation and Isotopes
T1  - Optimization of the radiolabelling method for improved in vitro and in vivo stability of 90Y-albumin microspheres
VL  - 156
SP  - 108984
DO  - 10.1016/j.apradiso.2019.108984
ER  - 
@article{
author = "Vukadinović, Aleksandar and Janković, Drina and Radović, Magdalena and Milanović, Zorana and Mirković, Marija D. and Stanković, Dragana and Vranješ-Đurić, Sanja",
year = "2020",
abstract = "Biologically stable 90Y-labelled albumin microspheres (AMS) were developed by optimizing the process of their preparation. Three formulations of 90Y-AMS were initially prepared with high radiolabelling yield but depending on the step when the radionuclide 90Y and DTPA chelator were added, radiolabelled microspheres with different in vitro and in vivo stability were obtained. DTPA was proved as a useful chelating agent that tightly links radionuclide 90Y to albumin. Also, AMS radiolabelled via DTPA during preparation and before microspheres stabilization, showed significant in vitro and in vivo stability ready for the potential use in selective internal radiation therapy. © 2019 Elsevier Ltd",
journal = "Applied Radiation and Isotopes",
title = "Optimization of the radiolabelling method for improved in vitro and in vivo stability of 90Y-albumin microspheres",
volume = "156",
pages = "108984",
doi = "10.1016/j.apradiso.2019.108984"
}
Vukadinović, A., Janković, D., Radović, M., Milanović, Z., Mirković, M. D., Stanković, D.,& Vranješ-Đurić, S.. (2020). Optimization of the radiolabelling method for improved in vitro and in vivo stability of 90Y-albumin microspheres. in Applied Radiation and Isotopes, 156, 108984.
https://doi.org/10.1016/j.apradiso.2019.108984
Vukadinović A, Janković D, Radović M, Milanović Z, Mirković MD, Stanković D, Vranješ-Đurić S. Optimization of the radiolabelling method for improved in vitro and in vivo stability of 90Y-albumin microspheres. in Applied Radiation and Isotopes. 2020;156:108984.
doi:10.1016/j.apradiso.2019.108984 .
Vukadinović, Aleksandar, Janković, Drina, Radović, Magdalena, Milanović, Zorana, Mirković, Marija D., Stanković, Dragana, Vranješ-Đurić, Sanja, "Optimization of the radiolabelling method for improved in vitro and in vivo stability of 90Y-albumin microspheres" in Applied Radiation and Isotopes, 156 (2020):108984,
https://doi.org/10.1016/j.apradiso.2019.108984 . .
1
1
2

Tailoring IONP shape and designing nanocomposite IONS@GN toward modification of SPCE to enhance electrochemical degradation of organic dye

Ognjanović, Miloš; Stanković, Dalibor M.; Fabian, Martin; Vranješ-Đurić, Sanja; Antić, Bratislav; Dojčinović, Biljana P.

(2020)

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor M.
AU  - Fabian, Martin
AU  - Vranješ-Đurić, Sanja
AU  - Antić, Bratislav
AU  - Dojčinović, Biljana P.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8810
AB  - Iron oxide nanoparticles (IONP) with different distinctive morphologies (spherical, cubic, flower-like and needles) were utilized for modification of screen-printed carbon electrodes (SPCE) to be used for synthetic organic dye degradation by an electrochemical approach. This platform was implemented for removal of the synthetic organic dye, Reactive Black 5 (RB5) in aqueous solution. Modified SPCE with spherically shaped IONP (IONS) had the highest dye removal efficiency. Thus, IONS were then used for surface decoration of the most common carbon-based materials (graphene, graphene oxide, carboxylated graphene, graphene nanoribbons, graphene nanoplatelets, single- and multi-wall carbon nanotubes), and the nanocomposites formed were deposited on the electrode surfaces. Using IONS/graphene composite (IONS@GN) for electrode modification resulted in the best effect. Removal of RB5 with this electrode was 51% better in comparison with bare SPCE, reducing the time required for complete dye degradation from 61 to 30 min Using IONS-modified SPCE, total RB5 removal occurred in 51 min, improving the performance by 16% over that of bare SPCE. The effects determined, i.e., the best IONP morphology and best type of carbon-based material for nanocomposite formation to enhance RB5 removal will provide guidelines for further modifications of SPCE with nanomaterials and nanocomposites, for application of this electrochemical approach in the degradation of organic pollutants. © 2020 The Author(s). Published by IOP Publishing Ltd.
T2  - Materials Research Express
T1  - Tailoring IONP shape and designing nanocomposite IONS@GN toward modification of SPCE to enhance electrochemical degradation of organic dye
VL  - 7
IS  - 1
SP  - 015509
DO  - 10.1088/2053-1591/ab6490
ER  - 
@article{
author = "Ognjanović, Miloš and Stanković, Dalibor M. and Fabian, Martin and Vranješ-Đurić, Sanja and Antić, Bratislav and Dojčinović, Biljana P.",
year = "2020",
abstract = "Iron oxide nanoparticles (IONP) with different distinctive morphologies (spherical, cubic, flower-like and needles) were utilized for modification of screen-printed carbon electrodes (SPCE) to be used for synthetic organic dye degradation by an electrochemical approach. This platform was implemented for removal of the synthetic organic dye, Reactive Black 5 (RB5) in aqueous solution. Modified SPCE with spherically shaped IONP (IONS) had the highest dye removal efficiency. Thus, IONS were then used for surface decoration of the most common carbon-based materials (graphene, graphene oxide, carboxylated graphene, graphene nanoribbons, graphene nanoplatelets, single- and multi-wall carbon nanotubes), and the nanocomposites formed were deposited on the electrode surfaces. Using IONS/graphene composite (IONS@GN) for electrode modification resulted in the best effect. Removal of RB5 with this electrode was 51% better in comparison with bare SPCE, reducing the time required for complete dye degradation from 61 to 30 min Using IONS-modified SPCE, total RB5 removal occurred in 51 min, improving the performance by 16% over that of bare SPCE. The effects determined, i.e., the best IONP morphology and best type of carbon-based material for nanocomposite formation to enhance RB5 removal will provide guidelines for further modifications of SPCE with nanomaterials and nanocomposites, for application of this electrochemical approach in the degradation of organic pollutants. © 2020 The Author(s). Published by IOP Publishing Ltd.",
journal = "Materials Research Express",
title = "Tailoring IONP shape and designing nanocomposite IONS@GN toward modification of SPCE to enhance electrochemical degradation of organic dye",
volume = "7",
number = "1",
pages = "015509",
doi = "10.1088/2053-1591/ab6490"
}
Ognjanović, M., Stanković, D. M., Fabian, M., Vranješ-Đurić, S., Antić, B.,& Dojčinović, B. P.. (2020). Tailoring IONP shape and designing nanocomposite IONS@GN toward modification of SPCE to enhance electrochemical degradation of organic dye. in Materials Research Express, 7(1), 015509.
https://doi.org/10.1088/2053-1591/ab6490
Ognjanović M, Stanković DM, Fabian M, Vranješ-Đurić S, Antić B, Dojčinović BP. Tailoring IONP shape and designing nanocomposite IONS@GN toward modification of SPCE to enhance electrochemical degradation of organic dye. in Materials Research Express. 2020;7(1):015509.
doi:10.1088/2053-1591/ab6490 .
Ognjanović, Miloš, Stanković, Dalibor M., Fabian, Martin, Vranješ-Đurić, Sanja, Antić, Bratislav, Dojčinović, Biljana P., "Tailoring IONP shape and designing nanocomposite IONS@GN toward modification of SPCE to enhance electrochemical degradation of organic dye" in Materials Research Express, 7, no. 1 (2020):015509,
https://doi.org/10.1088/2053-1591/ab6490 . .
1
1
1

Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions

Aleksić, Jelena; Barudžija, Tanja; Jugović, Dragana; Mitrić, Miodrag; Bošković, Marko; Jagličić, Zvonko; Lisjak, Darja; Kostić, Ljiljana

(2020)

TY  - JOUR
AU  - Aleksić, Jelena
AU  - Barudžija, Tanja
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Bošković, Marko
AU  - Jagličić, Zvonko
AU  - Lisjak, Darja
AU  - Kostić, Ljiljana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8858
AB  - In this investigation, we have synthesized YbxY1-xF3 solid solutions by fluorination of yttrium and ytterbium sesquioxides with ammonium hydrogen difluoride. According to the XRD analysis, all synthesized YbxY1-xF3 samples have an orthorhombic crystal structure belonging to the β-YF3 structural type. The refinement of crystal structure was done by the Rietveld method within the Pnma space group using the TCH pseudo-Voigt function. The anisotropic peak broadening was analyzed, and the average apparent crystallite size is about 50 nm with a small anisotropy of shape, while the significant microstrain that is highly anisotropic is present in all samples. The temperature-dependent magnetic susceptibility was analyzed by applying the model of a free ion perturbed by the crystal field. We have obtained the effective magnetic quantum numbers Mieff of four Kramer's doublets of Yb3+ ion along with the entire crystal field splitting of the 2F7/2 manifold of Yb3+ in YF3. The acquired maximum energy splitting of the ground level is about 150 K in our most diluted samples. The field-dependent isothermal magnetization measurements were carried out at various temperatures and analyzed by classical Langevin function. Results obtained from magnetic measurements show that all YbxY1-xF3 (x ≠ 0) solid solutions exhibit pure paramagnetic behavior in the whole temperature range from 2 to 300 K, with a predominant antiferromagnetic exchange interactions. © 2020 Elsevier Ltd
T2  - Journal of Physics and Chemistry of Solids
T1  - Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions
VL  - 142
SP  - 109449
DO  - 10.1016/j.jpcs.2020.109449
ER  - 
@article{
author = "Aleksić, Jelena and Barudžija, Tanja and Jugović, Dragana and Mitrić, Miodrag and Bošković, Marko and Jagličić, Zvonko and Lisjak, Darja and Kostić, Ljiljana",
year = "2020",
abstract = "In this investigation, we have synthesized YbxY1-xF3 solid solutions by fluorination of yttrium and ytterbium sesquioxides with ammonium hydrogen difluoride. According to the XRD analysis, all synthesized YbxY1-xF3 samples have an orthorhombic crystal structure belonging to the β-YF3 structural type. The refinement of crystal structure was done by the Rietveld method within the Pnma space group using the TCH pseudo-Voigt function. The anisotropic peak broadening was analyzed, and the average apparent crystallite size is about 50 nm with a small anisotropy of shape, while the significant microstrain that is highly anisotropic is present in all samples. The temperature-dependent magnetic susceptibility was analyzed by applying the model of a free ion perturbed by the crystal field. We have obtained the effective magnetic quantum numbers Mieff of four Kramer's doublets of Yb3+ ion along with the entire crystal field splitting of the 2F7/2 manifold of Yb3+ in YF3. The acquired maximum energy splitting of the ground level is about 150 K in our most diluted samples. The field-dependent isothermal magnetization measurements were carried out at various temperatures and analyzed by classical Langevin function. Results obtained from magnetic measurements show that all YbxY1-xF3 (x ≠ 0) solid solutions exhibit pure paramagnetic behavior in the whole temperature range from 2 to 300 K, with a predominant antiferromagnetic exchange interactions. © 2020 Elsevier Ltd",
journal = "Journal of Physics and Chemistry of Solids",
title = "Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions",
volume = "142",
pages = "109449",
doi = "10.1016/j.jpcs.2020.109449"
}
Aleksić, J., Barudžija, T., Jugović, D., Mitrić, M., Bošković, M., Jagličić, Z., Lisjak, D.,& Kostić, L.. (2020). Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions. in Journal of Physics and Chemistry of Solids, 142, 109449.
https://doi.org/10.1016/j.jpcs.2020.109449
Aleksić J, Barudžija T, Jugović D, Mitrić M, Bošković M, Jagličić Z, Lisjak D, Kostić L. Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions. in Journal of Physics and Chemistry of Solids. 2020;142:109449.
doi:10.1016/j.jpcs.2020.109449 .
Aleksić, Jelena, Barudžija, Tanja, Jugović, Dragana, Mitrić, Miodrag, Bošković, Marko, Jagličić, Zvonko, Lisjak, Darja, Kostić, Ljiljana, "Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions" in Journal of Physics and Chemistry of Solids, 142 (2020):109449,
https://doi.org/10.1016/j.jpcs.2020.109449 . .
1

Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties

Jović Orsini, Nataša; Milić, Mirjana M.; Torres, Teobaldo E.

(2020)

TY  - JOUR
AU  - Jović Orsini, Nataša
AU  - Milić, Mirjana M.
AU  - Torres, Teobaldo E.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8890
AB  - In this work, we studied structural and magnetic properties of 18 nm sized Zn-substituted magnetite, 28 nm sized unsubstituted and 17 nm sized (Mn, Zn)-substituted iron oxide nanoparticles, synthesized by thermal decomposition method. Their features were examined by analyzing the x-ray diffraction data, Fe-57 Mossbauer spectra and magnetization measurements by SQUID interferometer. The microstructure was inspected comparing the different size and strain broadening models incorporated into Fullprof software. In terms of crystallinity and size dispersion, applied synthesis protocol shows superiority over decomposition of iron oleate and the co-precipitation synthesis route. The saturation magnetization at T = 5 K was found to be within the M-S = 91.2-98.6 A m(2 )kg(-1) range, while at 300 K M-S of pure and Zn-substituted Fe3O4 nanoparticles is 83.6 and 86.2 A m(2 )kg(-1), respectively. Effective magnetic anisotropy constant K-eff, estimated under slow measurements by SQUID, is below 20 kJ m(-3) in all three samples. Some preliminary measurements of the magnetic hyperthermia performance, expressed via specific absorption rate value showed that the best heating performances were displayed by 18 nm sized oleic acid-coated Zn0.13Fe2.87O4 cubo-octahedrons with SAR approximately equal to 425 W/g(Fe) at H-0 = 20 kA m(-1) and f = 228 kHz.
T2  - Nanotechnology
T1  - Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties
VL  - 31
IS  - 22
SP  - 225707
DO  - 10.1088/1361-6528/ab76e7
ER  - 
@article{
author = "Jović Orsini, Nataša and Milić, Mirjana M. and Torres, Teobaldo E.",
year = "2020",
abstract = "In this work, we studied structural and magnetic properties of 18 nm sized Zn-substituted magnetite, 28 nm sized unsubstituted and 17 nm sized (Mn, Zn)-substituted iron oxide nanoparticles, synthesized by thermal decomposition method. Their features were examined by analyzing the x-ray diffraction data, Fe-57 Mossbauer spectra and magnetization measurements by SQUID interferometer. The microstructure was inspected comparing the different size and strain broadening models incorporated into Fullprof software. In terms of crystallinity and size dispersion, applied synthesis protocol shows superiority over decomposition of iron oleate and the co-precipitation synthesis route. The saturation magnetization at T = 5 K was found to be within the M-S = 91.2-98.6 A m(2 )kg(-1) range, while at 300 K M-S of pure and Zn-substituted Fe3O4 nanoparticles is 83.6 and 86.2 A m(2 )kg(-1), respectively. Effective magnetic anisotropy constant K-eff, estimated under slow measurements by SQUID, is below 20 kJ m(-3) in all three samples. Some preliminary measurements of the magnetic hyperthermia performance, expressed via specific absorption rate value showed that the best heating performances were displayed by 18 nm sized oleic acid-coated Zn0.13Fe2.87O4 cubo-octahedrons with SAR approximately equal to 425 W/g(Fe) at H-0 = 20 kA m(-1) and f = 228 kHz.",
journal = "Nanotechnology",
title = "Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties",
volume = "31",
number = "22",
pages = "225707",
doi = "10.1088/1361-6528/ab76e7"
}
Jović Orsini, N., Milić, M. M.,& Torres, T. E.. (2020). Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties. in Nanotechnology, 31(22), 225707.
https://doi.org/10.1088/1361-6528/ab76e7
Jović Orsini N, Milić MM, Torres TE. Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties. in Nanotechnology. 2020;31(22):225707.
doi:10.1088/1361-6528/ab76e7 .
Jović Orsini, Nataša, Milić, Mirjana M., Torres, Teobaldo E., "Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties" in Nanotechnology, 31, no. 22 (2020):225707,
https://doi.org/10.1088/1361-6528/ab76e7 . .
1
5
5
4

Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder

Jugović, Dragana; Milović, Miloš; Popović, Maja; Kusigerski, Vladan; Škapin, Srečo Davor; Rakočević, Zlatko Lj.; Mitrić, Miodrag

(2019)

TY  - JOUR
AU  - Jugović, Dragana
AU  - Milović, Miloš
AU  - Popović, Maja
AU  - Kusigerski, Vladan
AU  - Škapin, Srečo Davor
AU  - Rakočević, Zlatko Lj.
AU  - Mitrić, Miodrag
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0925838818336375
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7897
AB  - The main goal of this research has been to investigate for the first time the effects of fluorination on the crystal structure, magnetic, and electrochemical properties of the P2-type NaxCoO2 powder. Sodium cobalt oxide with a P2-type structure is synthesized by a modified solid-state reaction consisting of alternating processes of rapid heating up to 750 °C and rapid cooling to the room temperature. The obtained powder is fluorinated using a gas-solid reaction with NH4HF2 as fluorinating agent. Fluorination causes a decrease of sodium content in the parent phase with the concurrent formation of the minor phases of Na2CO3 and NaF. The structure of NaxCoO2 in both powders is refined in P63/mmc space group. The results of the Rietveld refinement combined with the findings from the XPS measurements confirm the Na0.76CoO2 and Na0.44CoO1.96F0.04 stoichiometries for the pristine and fluorinated powders, respectively, which indicates that 4 at.% of fluorine ions per formula unit are incorporated in the structure. Preliminary electrochemical investigations have revealed an improved charge/discharge performance. The influence of fluorination on morphology and magnetic properties has also been examined. © 2018 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder
VL  - 774
SP  - 30
EP  - 37
DO  - 10.1016/j.jallcom.2018.09.372
ER  - 
@article{
author = "Jugović, Dragana and Milović, Miloš and Popović, Maja and Kusigerski, Vladan and Škapin, Srečo Davor and Rakočević, Zlatko Lj. and Mitrić, Miodrag",
year = "2019",
abstract = "The main goal of this research has been to investigate for the first time the effects of fluorination on the crystal structure, magnetic, and electrochemical properties of the P2-type NaxCoO2 powder. Sodium cobalt oxide with a P2-type structure is synthesized by a modified solid-state reaction consisting of alternating processes of rapid heating up to 750 °C and rapid cooling to the room temperature. The obtained powder is fluorinated using a gas-solid reaction with NH4HF2 as fluorinating agent. Fluorination causes a decrease of sodium content in the parent phase with the concurrent formation of the minor phases of Na2CO3 and NaF. The structure of NaxCoO2 in both powders is refined in P63/mmc space group. The results of the Rietveld refinement combined with the findings from the XPS measurements confirm the Na0.76CoO2 and Na0.44CoO1.96F0.04 stoichiometries for the pristine and fluorinated powders, respectively, which indicates that 4 at.% of fluorine ions per formula unit are incorporated in the structure. Preliminary electrochemical investigations have revealed an improved charge/discharge performance. The influence of fluorination on morphology and magnetic properties has also been examined. © 2018 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder",
volume = "774",
pages = "30-37",
doi = "10.1016/j.jallcom.2018.09.372"
}
Jugović, D., Milović, M., Popović, M., Kusigerski, V., Škapin, S. D., Rakočević, Z. Lj.,& Mitrić, M.. (2019). Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder. in Journal of Alloys and Compounds, 774, 30-37.
https://doi.org/10.1016/j.jallcom.2018.09.372
Jugović D, Milović M, Popović M, Kusigerski V, Škapin SD, Rakočević ZL, Mitrić M. Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder. in Journal of Alloys and Compounds. 2019;774:30-37.
doi:10.1016/j.jallcom.2018.09.372 .
Jugović, Dragana, Milović, Miloš, Popović, Maja, Kusigerski, Vladan, Škapin, Srečo Davor, Rakočević, Zlatko Lj., Mitrić, Miodrag, "Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder" in Journal of Alloys and Compounds, 774 (2019):30-37,
https://doi.org/10.1016/j.jallcom.2018.09.372 . .
10
10
9

Characterization of NiO nanoparticles prepared using gelatin and a low-cost synthesis

Nikolić, Violeta N.; Gilić, Martina D.; Spasojević, Vojislav

(2019)

TY  - JOUR
AU  - Nikolić, Violeta N.
AU  - Gilić, Martina D.
AU  - Spasojević, Vojislav
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10287
AB  - Nanocomposite material containing NiO nanoparticles decorated on WO3 nanowires could be used for monitoring levels of H2S gas. The effectiveness of this material is mostly determined by NiO properties. The performed study presents the first stage in the preparation of modified NiO/WO3 nanocomposite material. In this article, NiO nanoparticles are prepared by a simple, low-cost method.The behavior of nano-sized NiO particles is probed by X-ray diffraction, Fourier transform Infrared Spectroscopy, Raman spectroscopy, and hysteretic measurement.
T2  - Vojnotehnički glasnik
T1  - Characterization of NiO nanoparticles prepared using gelatin and a low-cost synthesis
VL  - 67
IS  - 1
SP  - 36
EP  - 52
DO  - 10.5937/vojtehg67-18535
ER  - 
@article{
author = "Nikolić, Violeta N. and Gilić, Martina D. and Spasojević, Vojislav",
year = "2019",
abstract = "Nanocomposite material containing NiO nanoparticles decorated on WO3 nanowires could be used for monitoring levels of H2S gas. The effectiveness of this material is mostly determined by NiO properties. The performed study presents the first stage in the preparation of modified NiO/WO3 nanocomposite material. In this article, NiO nanoparticles are prepared by a simple, low-cost method.The behavior of nano-sized NiO particles is probed by X-ray diffraction, Fourier transform Infrared Spectroscopy, Raman spectroscopy, and hysteretic measurement.",
journal = "Vojnotehnički glasnik",
title = "Characterization of NiO nanoparticles prepared using gelatin and a low-cost synthesis",
volume = "67",
number = "1",
pages = "36-52",
doi = "10.5937/vojtehg67-18535"
}
Nikolić, V. N., Gilić, M. D.,& Spasojević, V.. (2019). Characterization of NiO nanoparticles prepared using gelatin and a low-cost synthesis. in Vojnotehnički glasnik, 67(1), 36-52.
https://doi.org/10.5937/vojtehg67-18535
Nikolić VN, Gilić MD, Spasojević V. Characterization of NiO nanoparticles prepared using gelatin and a low-cost synthesis. in Vojnotehnički glasnik. 2019;67(1):36-52.
doi:10.5937/vojtehg67-18535 .
Nikolić, Violeta N., Gilić, Martina D., Spasojević, Vojislav, "Characterization of NiO nanoparticles prepared using gelatin and a low-cost synthesis" in Vojnotehnički glasnik, 67, no. 1 (2019):36-52,
https://doi.org/10.5937/vojtehg67-18535 . .

Magnetic properties and heating efficacy of magnesium doped magnetite nanoparticles obtained by co-precipitation method

Kusigerski, Vladan; Illés, Erzsébet; Blanuša, Jovan; Gyergyek, Sašo; Bošković, Marko; Perović, Marija M.; Spasojević, Vojislav

(2019)

TY  - JOUR
AU  - Kusigerski, Vladan
AU  - Illés, Erzsébet
AU  - Blanuša, Jovan
AU  - Gyergyek, Sašo
AU  - Bošković, Marko
AU  - Perović, Marija M.
AU  - Spasojević, Vojislav
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7983
AB  - Ferrofluids based on magnesium substituted magnetite nanoparticles MgxFe3−xO4 (x = 0.1; 0.2; 0.4) were synthesised by a chemical co-precipitation method. Their physical properties have been compared with those of the magnetite based ferrofluid obtained by the same synthesis route. Both XRD and TEM studies showed particle size decrease with the increased Mg content while DLS experiments pointed to the more prominent aggregation of Mg-containing nanoparticles. Magnetic properties investigation conducted on the powder (i.e. dried) specimens showed decrease of magnetization values with increased Mg content except for the lowest concentration of x = 0.1 where substantial saturation magnetization rise of about 40% was recorded at room temperature. Heating abilities of the studied ferrofluids under the applied AC fields (SAR values) also showed decreasing trend with the increased Mg content even for x = 0.1 sample despite its elevated magnetization value. This trend has been understood as a consequence of the changed intrinsic nanoparticle properties such as size and magnetic anisotropy, as well as contribution of a collective behaviour due to an increased nanoparticle aggregation in Mg-doped systems.
T2  - Journal of Magnetism and Magnetic Materials
T1  - Magnetic properties and heating efficacy of magnesium doped magnetite nanoparticles obtained by co-precipitation method
VL  - 475
SP  - 470
EP  - 478
DO  - 10.1016/j.jmmm.2018.11.127
ER  - 
@article{
author = "Kusigerski, Vladan and Illés, Erzsébet and Blanuša, Jovan and Gyergyek, Sašo and Bošković, Marko and Perović, Marija M. and Spasojević, Vojislav",
year = "2019",
abstract = "Ferrofluids based on magnesium substituted magnetite nanoparticles MgxFe3−xO4 (x = 0.1; 0.2; 0.4) were synthesised by a chemical co-precipitation method. Their physical properties have been compared with those of the magnetite based ferrofluid obtained by the same synthesis route. Both XRD and TEM studies showed particle size decrease with the increased Mg content while DLS experiments pointed to the more prominent aggregation of Mg-containing nanoparticles. Magnetic properties investigation conducted on the powder (i.e. dried) specimens showed decrease of magnetization values with increased Mg content except for the lowest concentration of x = 0.1 where substantial saturation magnetization rise of about 40% was recorded at room temperature. Heating abilities of the studied ferrofluids under the applied AC fields (SAR values) also showed decreasing trend with the increased Mg content even for x = 0.1 sample despite its elevated magnetization value. This trend has been understood as a consequence of the changed intrinsic nanoparticle properties such as size and magnetic anisotropy, as well as contribution of a collective behaviour due to an increased nanoparticle aggregation in Mg-doped systems.",
journal = "Journal of Magnetism and Magnetic Materials",
title = "Magnetic properties and heating efficacy of magnesium doped magnetite nanoparticles obtained by co-precipitation method",
volume = "475",
pages = "470-478",
doi = "10.1016/j.jmmm.2018.11.127"
}
Kusigerski, V., Illés, E., Blanuša, J., Gyergyek, S., Bošković, M., Perović, M. M.,& Spasojević, V.. (2019). Magnetic properties and heating efficacy of magnesium doped magnetite nanoparticles obtained by co-precipitation method. in Journal of Magnetism and Magnetic Materials, 475, 470-478.
https://doi.org/10.1016/j.jmmm.2018.11.127
Kusigerski V, Illés E, Blanuša J, Gyergyek S, Bošković M, Perović MM, Spasojević V. Magnetic properties and heating efficacy of magnesium doped magnetite nanoparticles obtained by co-precipitation method. in Journal of Magnetism and Magnetic Materials. 2019;475:470-478.
doi:10.1016/j.jmmm.2018.11.127 .
Kusigerski, Vladan, Illés, Erzsébet, Blanuša, Jovan, Gyergyek, Sašo, Bošković, Marko, Perović, Marija M., Spasojević, Vojislav, "Magnetic properties and heating efficacy of magnesium doped magnetite nanoparticles obtained by co-precipitation method" in Journal of Magnetism and Magnetic Materials, 475 (2019):470-478,
https://doi.org/10.1016/j.jmmm.2018.11.127 . .
29
21
29

Characterization of glycidyl methacrylate based magnetic nanocomposites

Marković, Bojana M.; Spasojević, Vojislav; Dapčević, Aleksandra; Vuković, Zorica M.; Pavlović, Vladimir B.; Ranđelović, Danijela; Nastasović, Aleksandra B.

(2019)

TY  - JOUR
AU  - Marković, Bojana M.
AU  - Spasojević, Vojislav
AU  - Dapčević, Aleksandra
AU  - Vuković, Zorica M.
AU  - Pavlović, Vladimir B.
AU  - Ranđelović, Danijela
AU  - Nastasović, Aleksandra B.
PY  - 2019
UR  - http://www.doiserbia.nb.rs/Article.aspx?ID=0367-598X1901025M
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8148
AB  - Magnetic and non-magnetic macroporous crosslinked copolymers of glycidyl methacrylate and trimethylolpropane trimethacrylate were prepared by suspension copolymerization and functionalized with diethylenetriamine. The samples were characterized by mercury porosimetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy analysis (FTIR-ATR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SQUID magnetometry. The FTIR-ATR analysis of synthesized magnetic nanocomposites confirmed the presence of magnetite and successful amino-functionalization. Non-functionalized and amino-functionalized nanocomposites exhibited superparamagnetic behavior at 300 K, with a saturation magnetization of 5.0 emu/g and 2.9 emu/g, respectively. TEM analysis of the magnetic nanocomposite has shown that magnetic nanoparticles were homogeneously dispersed in the polymer matrix. It was demonstrated that incorporation of magnetic nanoparticles enhanced the thermal stability of the magnetic nanocomposite in comparison to the initial non-magnetic macroporous copolymer. © 2019, Association of Chemists and Chemical Engineers of Serbia. All rights reserved.
T2  - Hemijska industrija
T1  - Characterization of glycidyl methacrylate based magnetic nanocomposites
VL  - 73
IS  - 1
SP  - 25
EP  - 35
DO  - 10.2298/HEMIND181113006M
ER  - 
@article{
author = "Marković, Bojana M. and Spasojević, Vojislav and Dapčević, Aleksandra and Vuković, Zorica M. and Pavlović, Vladimir B. and Ranđelović, Danijela and Nastasović, Aleksandra B.",
year = "2019",
abstract = "Magnetic and non-magnetic macroporous crosslinked copolymers of glycidyl methacrylate and trimethylolpropane trimethacrylate were prepared by suspension copolymerization and functionalized with diethylenetriamine. The samples were characterized by mercury porosimetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy analysis (FTIR-ATR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SQUID magnetometry. The FTIR-ATR analysis of synthesized magnetic nanocomposites confirmed the presence of magnetite and successful amino-functionalization. Non-functionalized and amino-functionalized nanocomposites exhibited superparamagnetic behavior at 300 K, with a saturation magnetization of 5.0 emu/g and 2.9 emu/g, respectively. TEM analysis of the magnetic nanocomposite has shown that magnetic nanoparticles were homogeneously dispersed in the polymer matrix. It was demonstrated that incorporation of magnetic nanoparticles enhanced the thermal stability of the magnetic nanocomposite in comparison to the initial non-magnetic macroporous copolymer. © 2019, Association of Chemists and Chemical Engineers of Serbia. All rights reserved.",
journal = "Hemijska industrija",
title = "Characterization of glycidyl methacrylate based magnetic nanocomposites",
volume = "73",
number = "1",
pages = "25-35",
doi = "10.2298/HEMIND181113006M"
}
Marković, B. M., Spasojević, V., Dapčević, A., Vuković, Z. M., Pavlović, V. B., Ranđelović, D.,& Nastasović, A. B.. (2019). Characterization of glycidyl methacrylate based magnetic nanocomposites. in Hemijska industrija, 73(1), 25-35.
https://doi.org/10.2298/HEMIND181113006M
Marković BM, Spasojević V, Dapčević A, Vuković ZM, Pavlović VB, Ranđelović D, Nastasović AB. Characterization of glycidyl methacrylate based magnetic nanocomposites. in Hemijska industrija. 2019;73(1):25-35.
doi:10.2298/HEMIND181113006M .
Marković, Bojana M., Spasojević, Vojislav, Dapčević, Aleksandra, Vuković, Zorica M., Pavlović, Vladimir B., Ranđelović, Danijela, Nastasović, Aleksandra B., "Characterization of glycidyl methacrylate based magnetic nanocomposites" in Hemijska industrija, 73, no. 1 (2019):25-35,
https://doi.org/10.2298/HEMIND181113006M . .
1
2
2

Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3

Nikolić, Violeta N.; Milić, Mirjana M.; Zdravković, Jelena D.; Spasojević, Vojislav

(2019)

TY  - JOUR
AU  - Nikolić, Violeta N.
AU  - Milić, Mirjana M.
AU  - Zdravković, Jelena D.
AU  - Spasojević, Vojislav
PY  - 2019
UR  - http://link.springer.com/10.1134/S0036024419030130
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8213
AB  - Abstract: Origin of the intrinsic coercivity field variations observed by hysteretic measurements established by Nikolic et al. was investigated in detail by ZFC/FC measurements. In this study, magnetic behavior of the samples is further examined by calculation of the ZFC Mn(T) and Mn(H) first derivatives. Performed study showed that the main contribution to the measured coercivity comes from the ε-Fe2O3 particles, characterized by Hci = 24 kOe, although both samples posses SPM ε-Fe2O3 fraction. As a result, Hci values of the samples are differed dependent on the quantity of the SPM ε-Fe2O3 particles in the sample. Mechanism of the intrisic coercivity field variations is discussed. © 2019, Pleiades Publishing, Ltd.
T2  - Russian Journal of Physical Chemistry A
T1  - Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3
VL  - 93
IS  - 3
SP  - 588
EP  - 593
DO  - 10.1134/S0036024419030130
ER  - 
@article{
author = "Nikolić, Violeta N. and Milić, Mirjana M. and Zdravković, Jelena D. and Spasojević, Vojislav",
year = "2019",
abstract = "Abstract: Origin of the intrinsic coercivity field variations observed by hysteretic measurements established by Nikolic et al. was investigated in detail by ZFC/FC measurements. In this study, magnetic behavior of the samples is further examined by calculation of the ZFC Mn(T) and Mn(H) first derivatives. Performed study showed that the main contribution to the measured coercivity comes from the ε-Fe2O3 particles, characterized by Hci = 24 kOe, although both samples posses SPM ε-Fe2O3 fraction. As a result, Hci values of the samples are differed dependent on the quantity of the SPM ε-Fe2O3 particles in the sample. Mechanism of the intrisic coercivity field variations is discussed. © 2019, Pleiades Publishing, Ltd.",
journal = "Russian Journal of Physical Chemistry A",
title = "Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3",
volume = "93",
number = "3",
pages = "588-593",
doi = "10.1134/S0036024419030130"
}
Nikolić, V. N., Milić, M. M., Zdravković, J. D.,& Spasojević, V.. (2019). Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3. in Russian Journal of Physical Chemistry A, 93(3), 588-593.
https://doi.org/10.1134/S0036024419030130
Nikolić VN, Milić MM, Zdravković JD, Spasojević V. Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3. in Russian Journal of Physical Chemistry A. 2019;93(3):588-593.
doi:10.1134/S0036024419030130 .
Nikolić, Violeta N., Milić, Mirjana M., Zdravković, Jelena D., Spasojević, Vojislav, "Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3" in Russian Journal of Physical Chemistry A, 93, no. 3 (2019):588-593,
https://doi.org/10.1134/S0036024419030130 . .
5
4
4

Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3

Nikolić, Violeta N.; Milić, Mirjana M.; Zdravković, Jelena D.; Spasojević, Vojislav

(2019)

TY  - JOUR
AU  - Nikolić, Violeta N.
AU  - Milić, Mirjana M.
AU  - Zdravković, Jelena D.
AU  - Spasojević, Vojislav
PY  - 2019
UR  - http://link.springer.com/10.1134/S0036024419020316
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8214
AB  - Abstract: ε-Fe2O3 phase is recognized as an attractive material, in both technological and scientific point of view, since it can achieve very high room-temperature coercivity (10–20 kOe). In this paper, multi-phase samples Fe2O3/SiO2 with slightly different Fe/Si molar ratio were produced by sol–gel synthesis route. The obtained samples were characterized by various experimental techniques including XRD, TA, FTIR, and SQUID (DC and AC magnetic measurements). It was found that both samples consisted of α-Fe2O3 and ε‑Fe2O3 phases embedded in the silica matrix, and showed very similar structural and magnetic properties, except that displayed significantly different room-temperature intrinsic coercivity field values: HciS1 = 14.3 kOe and HciS2 = 7.5 kOe. We have discussed possible origin of thus high intrinsic coercivity field variation. © 2019, Pleiades Publishing, Ltd.
T2  - Russian Journal of Physical Chemistry A
T1  - Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3
VL  - 93
IS  - 2
SP  - 377
EP  - 383
DO  - 10.1134/S0036024419020316
ER  - 
@article{
author = "Nikolić, Violeta N. and Milić, Mirjana M. and Zdravković, Jelena D. and Spasojević, Vojislav",
year = "2019",
abstract = "Abstract: ε-Fe2O3 phase is recognized as an attractive material, in both technological and scientific point of view, since it can achieve very high room-temperature coercivity (10–20 kOe). In this paper, multi-phase samples Fe2O3/SiO2 with slightly different Fe/Si molar ratio were produced by sol–gel synthesis route. The obtained samples were characterized by various experimental techniques including XRD, TA, FTIR, and SQUID (DC and AC magnetic measurements). It was found that both samples consisted of α-Fe2O3 and ε‑Fe2O3 phases embedded in the silica matrix, and showed very similar structural and magnetic properties, except that displayed significantly different room-temperature intrinsic coercivity field values: HciS1 = 14.3 kOe and HciS2 = 7.5 kOe. We have discussed possible origin of thus high intrinsic coercivity field variation. © 2019, Pleiades Publishing, Ltd.",
journal = "Russian Journal of Physical Chemistry A",
title = "Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3",
volume = "93",
number = "2",
pages = "377-383",
doi = "10.1134/S0036024419020316"
}
Nikolić, V. N., Milić, M. M., Zdravković, J. D.,& Spasojević, V.. (2019). Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3. in Russian Journal of Physical Chemistry A, 93(2), 377-383.
https://doi.org/10.1134/S0036024419020316
Nikolić VN, Milić MM, Zdravković JD, Spasojević V. Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3. in Russian Journal of Physical Chemistry A. 2019;93(2):377-383.
doi:10.1134/S0036024419020316 .
Nikolić, Violeta N., Milić, Mirjana M., Zdravković, Jelena D., Spasojević, Vojislav, "Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3" in Russian Journal of Physical Chemistry A, 93, no. 2 (2019):377-383,
https://doi.org/10.1134/S0036024419020316 . .
5
4
4

Tracking of the electronic re-ordering in Fe3O4/OA nanoparticles using magnetometry

Nikolić, Violeta N.; Tadić, Marin; Jovanović, Sonja; Spasojević, Vojislav

(2019)

TY  - JOUR
AU  - Nikolić, Violeta N.
AU  - Tadić, Marin
AU  - Jovanović, Sonja
AU  - Spasojević, Vojislav
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0272884219314166
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8220
AB  - We performed structural and magnetic investigation of Fe3O4/OA nanoparticles prepared by solvothermal method. Based on XRD, TEM and FTIR examination, investigated sample contained monodisperse, 5 nm-sized spherical magnetite nanoparticles coated with oleic acid. Magnetic measurement of the hysteretic curves at 5 K in zero-field cooled (ZFC) and field-cooled (FC) regime confirmed presence of exchange bias effect. ZFC/FC measurements were performed in applied magnetic fields: 10 Oe, 100 Oe, 200 Oe, 500 Oe and 1000 Oe. Zero-field cooled magnetization curves recorded in 10 Oe and 100 Oe exhibited behavior characteristic for low coercivity Nanomaterials. Same sample exposed to the ZFC/FC measurement protocol in 200 Oe, 500 Oe and 1000 Oe showed increase in ZFC magnetization in the certain temperature range. The observed feature is attributed to the local changes in the magnetite electronic structure, occurred through the spin reorientation process. © 2019 Elsevier Ltd and Techna Group S.r.l.
T2  - Ceramics International
T1  - Tracking of the electronic re-ordering in Fe3O4/OA nanoparticles using magnetometry
VL  - 45
IS  - 14
SP  - 17429
EP  - 17437
DO  - 10.1016/j.ceramint.2019.05.303
ER  - 
@article{
author = "Nikolić, Violeta N. and Tadić, Marin and Jovanović, Sonja and Spasojević, Vojislav",
year = "2019",
abstract = "We performed structural and magnetic investigation of Fe3O4/OA nanoparticles prepared by solvothermal method. Based on XRD, TEM and FTIR examination, investigated sample contained monodisperse, 5 nm-sized spherical magnetite nanoparticles coated with oleic acid. Magnetic measurement of the hysteretic curves at 5 K in zero-field cooled (ZFC) and field-cooled (FC) regime confirmed presence of exchange bias effect. ZFC/FC measurements were performed in applied magnetic fields: 10 Oe, 100 Oe, 200 Oe, 500 Oe and 1000 Oe. Zero-field cooled magnetization curves recorded in 10 Oe and 100 Oe exhibited behavior characteristic for low coercivity Nanomaterials. Same sample exposed to the ZFC/FC measurement protocol in 200 Oe, 500 Oe and 1000 Oe showed increase in ZFC magnetization in the certain temperature range. The observed feature is attributed to the local changes in the magnetite electronic structure, occurred through the spin reorientation process. © 2019 Elsevier Ltd and Techna Group S.r.l.",
journal = "Ceramics International",
title = "Tracking of the electronic re-ordering in Fe3O4/OA nanoparticles using magnetometry",
volume = "45",
number = "14",
pages = "17429-17437",
doi = "10.1016/j.ceramint.2019.05.303"
}
Nikolić, V. N., Tadić, M., Jovanović, S.,& Spasojević, V.. (2019). Tracking of the electronic re-ordering in Fe3O4/OA nanoparticles using magnetometry. in Ceramics International, 45(14), 17429-17437.
https://doi.org/10.1016/j.ceramint.2019.05.303
Nikolić VN, Tadić M, Jovanović S, Spasojević V. Tracking of the electronic re-ordering in Fe3O4/OA nanoparticles using magnetometry. in Ceramics International. 2019;45(14):17429-17437.
doi:10.1016/j.ceramint.2019.05.303 .
Nikolić, Violeta N., Tadić, Marin, Jovanović, Sonja, Spasojević, Vojislav, "Tracking of the electronic re-ordering in Fe3O4/OA nanoparticles using magnetometry" in Ceramics International, 45, no. 14 (2019):17429-17437,
https://doi.org/10.1016/j.ceramint.2019.05.303 . .

Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose

Jugović, Dragana; Mitrić, Miodrag; Milović, Miloš; Ivanovski, Valentin N.; Škapin, Srečo Davor; Dojčinović, Biljana P.; Uskoković, Dragan

(2019)

TY  - JOUR
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Milović, Miloš
AU  - Ivanovski, Valentin N.
AU  - Škapin, Srečo Davor
AU  - Dojčinović, Biljana P.
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8052
AB  - A new method involving the homogeneous dispersion of precursor compounds inside a methylcellulose matrix is used for the synthesis of a composite powder of Li 2 FeP 2 O 7 and carbon. The properties of carbon-containing and carbon-free powders are studied by X-ray powder diffraction (XRD) including Rietveld refinement, Mössbauer spectroscopy, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), galvanostatic cycling, and electrochemical impedance spectroscopy (EIS). The structure of both powders is refined in a monoclinic framework (space group P2 1 /c). The structural refinement and Mössbauer spectroscopy reveal different degrees of partial occupancy of mixed-occupied sites by lithium. Electrochemical measurements show that the in situ formation of carbon improves capacity (90% of 1-electron theoretical capacity) through decreased charge-transfer resistance. © 2019 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose
VL  - 786
SP  - 912
EP  - 919
DO  - 10.1016/j.jallcom.2019.01.392
ER  - 
@article{
author = "Jugović, Dragana and Mitrić, Miodrag and Milović, Miloš and Ivanovski, Valentin N. and Škapin, Srečo Davor and Dojčinović, Biljana P. and Uskoković, Dragan",
year = "2019",
abstract = "A new method involving the homogeneous dispersion of precursor compounds inside a methylcellulose matrix is used for the synthesis of a composite powder of Li 2 FeP 2 O 7 and carbon. The properties of carbon-containing and carbon-free powders are studied by X-ray powder diffraction (XRD) including Rietveld refinement, Mössbauer spectroscopy, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), galvanostatic cycling, and electrochemical impedance spectroscopy (EIS). The structure of both powders is refined in a monoclinic framework (space group P2 1 /c). The structural refinement and Mössbauer spectroscopy reveal different degrees of partial occupancy of mixed-occupied sites by lithium. Electrochemical measurements show that the in situ formation of carbon improves capacity (90% of 1-electron theoretical capacity) through decreased charge-transfer resistance. © 2019 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose",
volume = "786",
pages = "912-919",
doi = "10.1016/j.jallcom.2019.01.392"
}
Jugović, D., Mitrić, M., Milović, M., Ivanovski, V. N., Škapin, S. D., Dojčinović, B. P.,& Uskoković, D.. (2019). Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose. in Journal of Alloys and Compounds, 786, 912-919.
https://doi.org/10.1016/j.jallcom.2019.01.392
Jugović D, Mitrić M, Milović M, Ivanovski VN, Škapin SD, Dojčinović BP, Uskoković D. Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose. in Journal of Alloys and Compounds. 2019;786:912-919.
doi:10.1016/j.jallcom.2019.01.392 .
Jugović, Dragana, Mitrić, Miodrag, Milović, Miloš, Ivanovski, Valentin N., Škapin, Srečo Davor, Dojčinović, Biljana P., Uskoković, Dragan, "Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose" in Journal of Alloys and Compounds, 786 (2019):912-919,
https://doi.org/10.1016/j.jallcom.2019.01.392 . .
2
3
4

On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study

Milović, Miloš; Vasić Anićijević, Dragana D.; Jugović, Dragana; Anićijević, Vladan J.; Veselinović, Ljiljana M.; Mitrić, Miodrag; Uskoković, Dragan

(2019)

TY  - JOUR
AU  - Milović, Miloš
AU  - Vasić Anićijević, Dragana D.
AU  - Jugović, Dragana
AU  - Anićijević, Vladan J.
AU  - Veselinović, Ljiljana M.
AU  - Mitrić, Miodrag
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8017
AB  - Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system. © 2018 Elsevier Masson SAS
T2  - Solid State Sciences
T1  - On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study
VL  - 87
SP  - 81
EP  - 86
DO  - 10.1016/j.solidstatesciences.2018.11.008
ER  - 
@article{
author = "Milović, Miloš and Vasić Anićijević, Dragana D. and Jugović, Dragana and Anićijević, Vladan J. and Veselinović, Ljiljana M. and Mitrić, Miodrag and Uskoković, Dragan",
year = "2019",
abstract = "Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system. © 2018 Elsevier Masson SAS",
journal = "Solid State Sciences",
title = "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study",
volume = "87",
pages = "81-86",
doi = "10.1016/j.solidstatesciences.2018.11.008"
}
Milović, M., Vasić Anićijević, D. D., Jugović, D., Anićijević, V. J., Veselinović, L. M., Mitrić, M.,& Uskoković, D.. (2019). On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences, 87, 81-86.
https://doi.org/10.1016/j.solidstatesciences.2018.11.008
Milović M, Vasić Anićijević DD, Jugović D, Anićijević VJ, Veselinović LM, Mitrić M, Uskoković D. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences. 2019;87:81-86.
doi:10.1016/j.solidstatesciences.2018.11.008 .
Milović, Miloš, Vasić Anićijević, Dragana D., Jugović, Dragana, Anićijević, Vladan J., Veselinović, Ljiljana M., Mitrić, Miodrag, Uskoković, Dragan, "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study" in Solid State Sciences, 87 (2019):81-86,
https://doi.org/10.1016/j.solidstatesciences.2018.11.008 . .
1
2
2

On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study

Milović, Miloš; Vasić Anićijević, Dragana D.; Jugović, Dragana; Anićijević, Vladan J.; Veselinović, Ljiljana M.; Mitrić, Miodrag; Uskoković, Dragan

(2019)

TY  - JOUR
AU  - Milović, Miloš
AU  - Vasić Anićijević, Dragana D.
AU  - Jugović, Dragana
AU  - Anićijević, Vladan J.
AU  - Veselinović, Ljiljana M.
AU  - Mitrić, Miodrag
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8021
AB  - Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system. © 2018 Elsevier Masson SAS
T2  - Solid State Sciences
T1  - On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study
VL  - 87
SP  - 81
EP  - 86
DO  - 10.1016/j.solidstatesciences.2018.11.008
ER  - 
@article{
author = "Milović, Miloš and Vasić Anićijević, Dragana D. and Jugović, Dragana and Anićijević, Vladan J. and Veselinović, Ljiljana M. and Mitrić, Miodrag and Uskoković, Dragan",
year = "2019",
abstract = "Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system. © 2018 Elsevier Masson SAS",
journal = "Solid State Sciences",
title = "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study",
volume = "87",
pages = "81-86",
doi = "10.1016/j.solidstatesciences.2018.11.008"
}
Milović, M., Vasić Anićijević, D. D., Jugović, D., Anićijević, V. J., Veselinović, L. M., Mitrić, M.,& Uskoković, D.. (2019). On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences, 87, 81-86.
https://doi.org/10.1016/j.solidstatesciences.2018.11.008
Milović M, Vasić Anićijević DD, Jugović D, Anićijević VJ, Veselinović LM, Mitrić M, Uskoković D. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences. 2019;87:81-86.
doi:10.1016/j.solidstatesciences.2018.11.008 .
Milović, Miloš, Vasić Anićijević, Dragana D., Jugović, Dragana, Anićijević, Vladan J., Veselinović, Ljiljana M., Mitrić, Miodrag, Uskoković, Dragan, "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study" in Solid State Sciences, 87 (2019):81-86,
https://doi.org/10.1016/j.solidstatesciences.2018.11.008 . .
1
2
2

Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose

Jugović, Dragana; Mitrić, Miodrag; Milović, Miloš; Ivanovski, Valentin N.; Škapin, Srečo Davor; Dojčinović, Biljana P.; Uskoković, Dragan

(2019)

TY  - JOUR
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Milović, Miloš
AU  - Ivanovski, Valentin N.
AU  - Škapin, Srečo Davor
AU  - Dojčinović, Biljana P.
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8047
AB  - A new method involving the homogeneous dispersion of precursor compounds inside a methylcellulose matrix is used for the synthesis of a composite powder of Li 2 FeP 2 O 7 and carbon. The properties of carbon-containing and carbon-free powders are studied by X-ray powder diffraction (XRD) including Rietveld refinement, Mössbauer spectroscopy, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), galvanostatic cycling, and electrochemical impedance spectroscopy (EIS). The structure of both powders is refined in a monoclinic framework (space group P2 1 /c). The structural refinement and Mössbauer spectroscopy reveal different degrees of partial occupancy of mixed-occupied sites by lithium. Electrochemical measurements show that the in situ formation of carbon improves capacity (90% of 1-electron theoretical capacity) through decreased charge-transfer resistance. © 2019 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose
VL  - 786
SP  - 912
EP  - 919
DO  - 10.1016/j.jallcom.2019.01.392
ER  - 
@article{
author = "Jugović, Dragana and Mitrić, Miodrag and Milović, Miloš and Ivanovski, Valentin N. and Škapin, Srečo Davor and Dojčinović, Biljana P. and Uskoković, Dragan",
year = "2019",
abstract = "A new method involving the homogeneous dispersion of precursor compounds inside a methylcellulose matrix is used for the synthesis of a composite powder of Li 2 FeP 2 O 7 and carbon. The properties of carbon-containing and carbon-free powders are studied by X-ray powder diffraction (XRD) including Rietveld refinement, Mössbauer spectroscopy, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), galvanostatic cycling, and electrochemical impedance spectroscopy (EIS). The structure of both powders is refined in a monoclinic framework (space group P2 1 /c). The structural refinement and Mössbauer spectroscopy reveal different degrees of partial occupancy of mixed-occupied sites by lithium. Electrochemical measurements show that the in situ formation of carbon improves capacity (90% of 1-electron theoretical capacity) through decreased charge-transfer resistance. © 2019 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose",
volume = "786",
pages = "912-919",
doi = "10.1016/j.jallcom.2019.01.392"
}
Jugović, D., Mitrić, M., Milović, M., Ivanovski, V. N., Škapin, S. D., Dojčinović, B. P.,& Uskoković, D.. (2019). Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose. in Journal of Alloys and Compounds, 786, 912-919.
https://doi.org/10.1016/j.jallcom.2019.01.392
Jugović D, Mitrić M, Milović M, Ivanovski VN, Škapin SD, Dojčinović BP, Uskoković D. Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose. in Journal of Alloys and Compounds. 2019;786:912-919.
doi:10.1016/j.jallcom.2019.01.392 .
Jugović, Dragana, Mitrić, Miodrag, Milović, Miloš, Ivanovski, Valentin N., Škapin, Srečo Davor, Dojčinović, Biljana P., Uskoković, Dragan, "Structural and electrochemical properties of the Li2FeP2O7/C composite prepared using soluble methylcellulose" in Journal of Alloys and Compounds, 786 (2019):912-919,
https://doi.org/10.1016/j.jallcom.2019.01.392 . .
2
3
4

Hydrothermal synthesis of hematite (α-Fe2O3) nanoparticle forms: Synthesis conditions, structure, particle shape analysis, cytotoxicity and magnetic properties

Tadić, Marin; Trpkov, Đorđe; Kopanja, Lazar; Vojnović, Sandra; Panjan, Matjaž

(2019)

TY  - JOUR
AU  - Tadić, Marin
AU  - Trpkov, Đorđe
AU  - Kopanja, Lazar
AU  - Vojnović, Sandra
AU  - Panjan, Matjaž
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0925838819312587
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8133
AB  - In this work, we present the magnetic and structural properties of α-Fe 2 O 3 nanoparticles synthesized by the hydrothermal synthesis method. XRD, FTIR and Raman spectroscopy indicate that the samples consist of single-phase α-Fe 2 O 3 nanoparticles. A microstructural analysis by TEM and SEM shows: (i) irregular nanoparticles (∼50 nm), (ii) plate-like nanoparticles (with thickness t∼10 nm and diameter d∼50–80 nm) and (iii) microsized ellipsoid 3D superstructures (with length l∼3.5 and diameter d∼1.5 μm) composed of nanosized building blocks (∼50 nm). We used circularity, elongation and convexity measures to quantitatively analyze the shape of the particles. Irregular hematite nanoparticles were synthesized using a water solution of ferric precursor and sodium acetate during the hydrothermal reaction (reaction conditions: T = 180 °C, t = 12 h). The same hydrothermal reaction temperature, reaction duration and ferric precursor (without sodium acetate) were used for synthesizing hematite ellipsoid 3D superstructures. Addition of urea and glycine surfactants in hydrothermal reaction resulted in the formation of nanoplate hematite particles. The role of these surfactants on the structure and morphology of the particles was also investigated. Magnetic measurements at the room temperature displayed a wide range of coercivities, from H C = 73 Oe for irregular nanoparticles, H C = 689 Oe for nanoplates to H C = 2688 Oe for hematite ellipsoid 3D superstructures. The measured coercivity for the ellipsoid superstructure was about 35 times higher than in the case of irregular hematite nanoparticles and about 4 times than the coercivity of hematite nanoplates. Magnetic properties of synthesized samples were related to their structure and morphology. We conclude that shape anisotropy influenced enhancement of the coercivity in hematite nanoplates whereas hematite ellipsoid 3D superstructure (nanoparticle clusters) induced the formation of multidomain magnetic structure and highest coercivity revealing its superior structure for enhanced magnetic properties. The synthesized hematite nanoparticle structures exhibit low cytotoxicity levels on the human lung fibroblasts (MRC5) cell line demonstrating a safe use of these nanoparticles for practical applications. © 2019 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Hydrothermal synthesis of hematite (α-Fe2O3) nanoparticle forms: Synthesis conditions, structure, particle shape analysis, cytotoxicity and magnetic properties
VL  - 792
SP  - 599
EP  - 609
DO  - 10.1016/j.jallcom.2019.03.414
ER  - 
@article{
author = "Tadić, Marin and Trpkov, Đorđe and Kopanja, Lazar and Vojnović, Sandra and Panjan, Matjaž",
year = "2019",
abstract = "In this work, we present the magnetic and structural properties of α-Fe 2 O 3 nanoparticles synthesized by the hydrothermal synthesis method. XRD, FTIR and Raman spectroscopy indicate that the samples consist of single-phase α-Fe 2 O 3 nanoparticles. A microstructural analysis by TEM and SEM shows: (i) irregular nanoparticles (∼50 nm), (ii) plate-like nanoparticles (with thickness t∼10 nm and diameter d∼50–80 nm) and (iii) microsized ellipsoid 3D superstructures (with length l∼3.5 and diameter d∼1.5 μm) composed of nanosized building blocks (∼50 nm). We used circularity, elongation and convexity measures to quantitatively analyze the shape of the particles. Irregular hematite nanoparticles were synthesized using a water solution of ferric precursor and sodium acetate during the hydrothermal reaction (reaction conditions: T = 180 °C, t = 12 h). The same hydrothermal reaction temperature, reaction duration and ferric precursor (without sodium acetate) were used for synthesizing hematite ellipsoid 3D superstructures. Addition of urea and glycine surfactants in hydrothermal reaction resulted in the formation of nanoplate hematite particles. The role of these surfactants on the structure and morphology of the particles was also investigated. Magnetic measurements at the room temperature displayed a wide range of coercivities, from H C = 73 Oe for irregular nanoparticles, H C = 689 Oe for nanoplates to H C = 2688 Oe for hematite ellipsoid 3D superstructures. The measured coercivity for the ellipsoid superstructure was about 35 times higher than in the case of irregular hematite nanoparticles and about 4 times than the coercivity of hematite nanoplates. Magnetic properties of synthesized samples were related to their structure and morphology. We conclude that shape anisotropy influenced enhancement of the coercivity in hematite nanoplates whereas hematite ellipsoid 3D superstructure (nanoparticle clusters) induced the formation of multidomain magnetic structure and highest coercivity revealing its superior structure for enhanced magnetic properties. The synthesized hematite nanoparticle structures exhibit low cytotoxicity levels on the human lung fibroblasts (MRC5) cell line demonstrating a safe use of these nanoparticles for practical applications. © 2019 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Hydrothermal synthesis of hematite (α-Fe2O3) nanoparticle forms: Synthesis conditions, structure, particle shape analysis, cytotoxicity and magnetic properties",
volume = "792",
pages = "599-609",
doi = "10.1016/j.jallcom.2019.03.414"
}
Tadić, M., Trpkov, Đ., Kopanja, L., Vojnović, S.,& Panjan, M.. (2019). Hydrothermal synthesis of hematite (α-Fe2O3) nanoparticle forms: Synthesis conditions, structure, particle shape analysis, cytotoxicity and magnetic properties. in Journal of Alloys and Compounds, 792, 599-609.
https://doi.org/10.1016/j.jallcom.2019.03.414
Tadić M, Trpkov Đ, Kopanja L, Vojnović S, Panjan M. Hydrothermal synthesis of hematite (α-Fe2O3) nanoparticle forms: Synthesis conditions, structure, particle shape analysis, cytotoxicity and magnetic properties. in Journal of Alloys and Compounds. 2019;792:599-609.
doi:10.1016/j.jallcom.2019.03.414 .
Tadić, Marin, Trpkov, Đorđe, Kopanja, Lazar, Vojnović, Sandra, Panjan, Matjaž, "Hydrothermal synthesis of hematite (α-Fe2O3) nanoparticle forms: Synthesis conditions, structure, particle shape analysis, cytotoxicity and magnetic properties" in Journal of Alloys and Compounds, 792 (2019):599-609,
https://doi.org/10.1016/j.jallcom.2019.03.414 . .
89
67
81

Nanoparticle shapes: Quantification by elongation, convexity and circularity measures

Kopanja, Lazar; Lončar, Boris B.; Žunić, Dragiša; Tadić, Marin

(2019)

TY  - JOUR
AU  - Kopanja, Lazar
AU  - Lončar, Boris B.
AU  - Žunić, Dragiša
AU  - Tadić, Marin
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8590
AB  - The goal of the nanoparticle synthesis is, first of all, the production of nanoparticles that will be more similar in size and shape. This is very important for the possibility of studying and applying nanomaterials because of their characteristics that are very sensitive to size and shape such as, for example, magnetic properties. In this paper, we propose the shape analysis of the nanoparticles using three shape descriptors – elongation, convexity and circularity. Experimental results were obtained by using TEM images of hematite nanoparticles that were, first of all, subjected to segmentation in order to obtain isolated nanoparticles, and then the values of elongation, convexity and circularity were measured. Convexity C x ( S ) is regarded as the ratio between shape’s area and area of the its convex hull. The convexity measure defines the degree to which a shape differs from a convex shape while the circularity measure defines the degree to which a shape differs from an ideal circle. The range of convexity and circularity values is (0, 1], while the range of elongation values is [1, ∞). The circle has lowest elongation (ε = 1), while it has biggest convexity and circularity values ( C x = 1; C = 1). The measures ε( S ), C x ( S ), C ( S ) proposed and used in the experiment have the few desirable properties and give intuitively expected results. None of the measures is good enough to describe all the shapes, and therefore it is suggested to use a variety of measures so that the shapes can be described better and then classify and control during the synthesis process.
T2  - Journal of Electrical Engineering
T1  - Nanoparticle shapes: Quantification by elongation, convexity and circularity measures
VL  - 70
IS  - 7
SP  - 44
EP  - 50
DO  - 10.2478/jee-2019-0040
ER  - 
@article{
author = "Kopanja, Lazar and Lončar, Boris B. and Žunić, Dragiša and Tadić, Marin",
year = "2019",
abstract = "The goal of the nanoparticle synthesis is, first of all, the production of nanoparticles that will be more similar in size and shape. This is very important for the possibility of studying and applying nanomaterials because of their characteristics that are very sensitive to size and shape such as, for example, magnetic properties. In this paper, we propose the shape analysis of the nanoparticles using three shape descriptors – elongation, convexity and circularity. Experimental results were obtained by using TEM images of hematite nanoparticles that were, first of all, subjected to segmentation in order to obtain isolated nanoparticles, and then the values of elongation, convexity and circularity were measured. Convexity C x ( S ) is regarded as the ratio between shape’s area and area of the its convex hull. The convexity measure defines the degree to which a shape differs from a convex shape while the circularity measure defines the degree to which a shape differs from an ideal circle. The range of convexity and circularity values is (0, 1], while the range of elongation values is [1, ∞). The circle has lowest elongation (ε = 1), while it has biggest convexity and circularity values ( C x = 1; C = 1). The measures ε( S ), C x ( S ), C ( S ) proposed and used in the experiment have the few desirable properties and give intuitively expected results. None of the measures is good enough to describe all the shapes, and therefore it is suggested to use a variety of measures so that the shapes can be described better and then classify and control during the synthesis process.",
journal = "Journal of Electrical Engineering",
title = "Nanoparticle shapes: Quantification by elongation, convexity and circularity measures",
volume = "70",
number = "7",
pages = "44-50",
doi = "10.2478/jee-2019-0040"
}
Kopanja, L., Lončar, B. B., Žunić, D.,& Tadić, M.. (2019). Nanoparticle shapes: Quantification by elongation, convexity and circularity measures. in Journal of Electrical Engineering, 70(7), 44-50.
https://doi.org/10.2478/jee-2019-0040
Kopanja L, Lončar BB, Žunić D, Tadić M. Nanoparticle shapes: Quantification by elongation, convexity and circularity measures. in Journal of Electrical Engineering. 2019;70(7):44-50.
doi:10.2478/jee-2019-0040 .
Kopanja, Lazar, Lončar, Boris B., Žunić, Dragiša, Tadić, Marin, "Nanoparticle shapes: Quantification by elongation, convexity and circularity measures" in Journal of Electrical Engineering, 70, no. 7 (2019):44-50,
https://doi.org/10.2478/jee-2019-0040 . .
4
3
4

Iron oxide nanochains coated with silica: Synthesis, surface effects and magnetic properties

Tadić, Marin; Kralj, Slavko; Lalatonne, Yoann; Motte, Laurence

(2019)

TY  - JOUR
AU  - Tadić, Marin
AU  - Kralj, Slavko
AU  - Lalatonne, Yoann
AU  - Motte, Laurence
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0169433219301138
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8033
AB  - Investigation and synthesis of anisotropic magnetic nanostructures, such as wires, rods, fibers, tubes and chains, is an important field of research due to the beneficial properties and great potential for practical applications ranging from magnetic data storage to biomedicine. Silica coated iron oxide nanochains of length up to 1 μm and diameter ∼80–100 nm have been synthesized by the simultaneous magnetic assembly of superparamagnetic iron oxide nanoparticle clusters (SNCs) as links (viz. maghemite, γ-Fe2O3) and the fixation of the assembled SNCs with an additional layer of deposited silica. We reveal that is possible to achieve either superparamagnetic or ferromagnetic behavior with the nanochains depending only on their physical orientation. The superparamagnetic behavior is observed for random orientation of nanochains whereas ferromagnetic properties (HC ≈ 100 Oe) come to the fore when the orientation is mainly parallel. These peculiar magnetic properties can be related to: (1) the specific size, which is ∼9 nm, of primary building blocks of the nanochains, i.e. of maghemite nanoparticles; (2) to the anisotropic chain-like shape of the particles; and (3) to inter-particle interactions. Large pore volume and pore size of silica shell as well as good colloidal stability and magnetic responsiveness of such nanochains enable applications in biomedicine. © 2019 Elsevier B.V.
T2  - Applied Surface Science
T1  - Iron oxide nanochains coated with silica: Synthesis, surface effects and magnetic properties
VL  - 476
SP  - 641
EP  - 646
DO  - 10.1016/j.apsusc.2019.01.098
ER  - 
@article{
author = "Tadić, Marin and Kralj, Slavko and Lalatonne, Yoann and Motte, Laurence",
year = "2019",
abstract = "Investigation and synthesis of anisotropic magnetic nanostructures, such as wires, rods, fibers, tubes and chains, is an important field of research due to the beneficial properties and great potential for practical applications ranging from magnetic data storage to biomedicine. Silica coated iron oxide nanochains of length up to 1 μm and diameter ∼80–100 nm have been synthesized by the simultaneous magnetic assembly of superparamagnetic iron oxide nanoparticle clusters (SNCs) as links (viz. maghemite, γ-Fe2O3) and the fixation of the assembled SNCs with an additional layer of deposited silica. We reveal that is possible to achieve either superparamagnetic or ferromagnetic behavior with the nanochains depending only on their physical orientation. The superparamagnetic behavior is observed for random orientation of nanochains whereas ferromagnetic properties (HC ≈ 100 Oe) come to the fore when the orientation is mainly parallel. These peculiar magnetic properties can be related to: (1) the specific size, which is ∼9 nm, of primary building blocks of the nanochains, i.e. of maghemite nanoparticles; (2) to the anisotropic chain-like shape of the particles; and (3) to inter-particle interactions. Large pore volume and pore size of silica shell as well as good colloidal stability and magnetic responsiveness of such nanochains enable applications in biomedicine. © 2019 Elsevier B.V.",
journal = "Applied Surface Science",
title = "Iron oxide nanochains coated with silica: Synthesis, surface effects and magnetic properties",
volume = "476",
pages = "641-646",
doi = "10.1016/j.apsusc.2019.01.098"
}
Tadić, M., Kralj, S., Lalatonne, Y.,& Motte, L.. (2019). Iron oxide nanochains coated with silica: Synthesis, surface effects and magnetic properties. in Applied Surface Science, 476, 641-646.
https://doi.org/10.1016/j.apsusc.2019.01.098
Tadić M, Kralj S, Lalatonne Y, Motte L. Iron oxide nanochains coated with silica: Synthesis, surface effects and magnetic properties. in Applied Surface Science. 2019;476:641-646.
doi:10.1016/j.apsusc.2019.01.098 .
Tadić, Marin, Kralj, Slavko, Lalatonne, Yoann, Motte, Laurence, "Iron oxide nanochains coated with silica: Synthesis, surface effects and magnetic properties" in Applied Surface Science, 476 (2019):641-646,
https://doi.org/10.1016/j.apsusc.2019.01.098 . .
33
29
32