TY  - JOUR
AU  - Alazreg, Asma
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11720
AB  - The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforcedwith MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested bymicrohardness measurements.
T2  - Materials Letters
T1  - Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles
VL  - 354
SP  - 135354
DO  - 10.1016/j.matlet.2023.135354
ER  - 

@article{
author = "Alazreg, Asma and Vuksanović, Marija M. and Mladenović, Ivana O. and Egelja, Adela and Janković-Mandić, Ljiljana and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforcedwith MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested bymicrohardness measurements.",
journal = "Materials Letters",
title = "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles",
volume = "354",
pages = "135354",
doi = "10.1016/j.matlet.2023.135354"
}

Alazreg, A., Vuksanović, M. M., Mladenović, I. O., Egelja, A., Janković-Mandić, L., Marinković, A.,& Jančić-Heinemann, R.. (2024). Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters, 354, 135354.
https://doi.org/10.1016/j.matlet.2023.135354

Alazreg A, Vuksanović MM, Mladenović IO, Egelja A, Janković-Mandić L, Marinković A, Jančić-Heinemann R. Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters. 2024;354:135354.
doi:10.1016/j.matlet.2023.135354 .

Alazreg, Asma, Vuksanović, Marija M., Mladenović, Ivana O., Egelja, Adela, Janković-Mandić, Ljiljana, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles" in Materials Letters, 354 (2024):135354,
https://doi.org/10.1016/j.matlet.2023.135354 . .

TY  - JOUR
AU  - Abduarahman, Muna Abdualatif
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Egelja, Adela
AU  - Savić, Andrija B.
AU  - Veličković, Zlate
AU  - Marinković, Aleksandar
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12866
AB  - This study aimed to investigate the adsorption of As(V), phosphate, and textile dye Acid Green 25 (AG-25) on layered double hydroxides Mn-Fe_LDH and corresponding membranes (wCell/Mn-Fe_LDH). The wCell membrane, derived from waste tobacco boxes, was formed by cross-linking of epoxy and amino modified cellulose fibers with epoxy modified Mn-Fe_LDH and lysine as cross-linker. Structural and morphological analyses were conducted for Mn-Fe_LDH and wCell/Mn-Fe_LDH. The batch system explored pH, contact time, temperature, and initial concentration effects on wCell/Mn-Fe_LDH adsorption efficiency. Adsorption capacities of 82.71, 106.9, and 130.3 mg g−1 were achieved for As(V), phosphate, and AG-25, respectively, indicating effective anionic species removal. Kinetic analysis suggested intraparticle diffusion as the rate-limiting step. Thermodynamic parameters and ionic strength effects indicated a physisorption mechanism for AG-25 and surface complexation for As(V) and phosphate. Biodegradation experiments after five adsorption/desorption cycles revealed the membrane’s decomposition, with phosphate’s strong bonding releasing essential elements valuable for soil fertilization. Effluent wastewater treatment demonstrated low environmental impact through the formation of insoluble As(V) salts and photocatalytic dye degradation.
T2  - Journal of Polymers and the Environment
T1  - Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal
IS  - InPress
DO  - 10.1007/s10924-024-03192-x
ER  - 

@article{
author = "Abduarahman, Muna Abdualatif and Vuksanović, Marija M. and Milošević, Milena and Egelja, Adela and Savić, Andrija B. and Veličković, Zlate and Marinković, Aleksandar",
year = "2024",
abstract = "This study aimed to investigate the adsorption of As(V), phosphate, and textile dye Acid Green 25 (AG-25) on layered double hydroxides Mn-Fe_LDH and corresponding membranes (wCell/Mn-Fe_LDH). The wCell membrane, derived from waste tobacco boxes, was formed by cross-linking of epoxy and amino modified cellulose fibers with epoxy modified Mn-Fe_LDH and lysine as cross-linker. Structural and morphological analyses were conducted for Mn-Fe_LDH and wCell/Mn-Fe_LDH. The batch system explored pH, contact time, temperature, and initial concentration effects on wCell/Mn-Fe_LDH adsorption efficiency. Adsorption capacities of 82.71, 106.9, and 130.3 mg g−1 were achieved for As(V), phosphate, and AG-25, respectively, indicating effective anionic species removal. Kinetic analysis suggested intraparticle diffusion as the rate-limiting step. Thermodynamic parameters and ionic strength effects indicated a physisorption mechanism for AG-25 and surface complexation for As(V) and phosphate. Biodegradation experiments after five adsorption/desorption cycles revealed the membrane’s decomposition, with phosphate’s strong bonding releasing essential elements valuable for soil fertilization. Effluent wastewater treatment demonstrated low environmental impact through the formation of insoluble As(V) salts and photocatalytic dye degradation.",
journal = "Journal of Polymers and the Environment",
title = "Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal",
number = "InPress",
doi = "10.1007/s10924-024-03192-x"
}

Abduarahman, M. A., Vuksanović, M. M., Milošević, M., Egelja, A., Savić, A. B., Veličković, Z.,& Marinković, A.. (2024). Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal. in Journal of Polymers and the Environment(InPress).
https://doi.org/10.1007/s10924-024-03192-x

Abduarahman MA, Vuksanović MM, Milošević M, Egelja A, Savić AB, Veličković Z, Marinković A. Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal. in Journal of Polymers and the Environment. 2024;(InPress).
doi:10.1007/s10924-024-03192-x .

Abduarahman, Muna Abdualatif, Vuksanović, Marija M., Milošević, Milena, Egelja, Adela, Savić, Andrija B., Veličković, Zlate, Marinković, Aleksandar, "Mn-Fe Layered Double Hydroxide Modified Cellulose-Based Membrane for Sustainable Anionic Pollutant Removal" in Journal of Polymers and the Environment, no. InPress (2024),
https://doi.org/10.1007/s10924-024-03192-x . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Dimitrijević, Ivan
AU  - Milentijević, Gordana
AU  - Babincev, Ljiljana
AU  - Gržetić, Jelena
AU  - Marinković, Aleksandar
AU  - Milosavljević, Milutin
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12939
AB  - The increase in waste polymer recycling has helped in promoting sustainability, and together with the use of renewable raw materials, it has become a widespread concept with positive effects on both the economy and ecology. Accordingly, the aim of this study was the synthesis of “green” plasticizers, marked as LA/PG/PET/EG/LA, formed from waste poly(ethylene terephthalate) (PET) and bio-based platform chemicals propylene glycol (PG) and levulinic acid (LA). The structure of the obtained plasticizers was complex, as confirmed by results from nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The LA/PG/PET/EG/LA plasticizers and waste poly(vinyl chloride) (PVC) were used in an optimized technology for PVC re-granulate production. The hardness of the PVC-based material with “green” plasticizers, in comparison to commercial plasticizer dioctyl terephthalate (DOTP), increased by 11.3%, while migration decreased. An improved material homogeneity and wettability of the fibers by the matrix were observed using SEM analysis of the material’s fracture surface, with a higher efficiency of intermolecular interactions leading to better mechanical performances of the newly designed materials. Thus, LA/PG/PET/EG/LA are unique materials with good compounding and plasticizing potential for PVC, as revealed by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). In that manner, the use of bio-renewable resources and recycled polymers will contribute to diminishing waste polymer generation, contributing to a lower carbon footprint.
T2  - Processes
T1  - Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation
VL  - 12
IS  - 3
SP  - 520
DO  - 10.3390/pr12030520
ER  - 

@article{
author = "Vuksanović, Marija M. and Milošević, Milena and Dimitrijević, Ivan and Milentijević, Gordana and Babincev, Ljiljana and Gržetić, Jelena and Marinković, Aleksandar and Milosavljević, Milutin",
year = "2024",
abstract = "The increase in waste polymer recycling has helped in promoting sustainability, and together with the use of renewable raw materials, it has become a widespread concept with positive effects on both the economy and ecology. Accordingly, the aim of this study was the synthesis of “green” plasticizers, marked as LA/PG/PET/EG/LA, formed from waste poly(ethylene terephthalate) (PET) and bio-based platform chemicals propylene glycol (PG) and levulinic acid (LA). The structure of the obtained plasticizers was complex, as confirmed by results from nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The LA/PG/PET/EG/LA plasticizers and waste poly(vinyl chloride) (PVC) were used in an optimized technology for PVC re-granulate production. The hardness of the PVC-based material with “green” plasticizers, in comparison to commercial plasticizer dioctyl terephthalate (DOTP), increased by 11.3%, while migration decreased. An improved material homogeneity and wettability of the fibers by the matrix were observed using SEM analysis of the material’s fracture surface, with a higher efficiency of intermolecular interactions leading to better mechanical performances of the newly designed materials. Thus, LA/PG/PET/EG/LA are unique materials with good compounding and plasticizing potential for PVC, as revealed by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). In that manner, the use of bio-renewable resources and recycled polymers will contribute to diminishing waste polymer generation, contributing to a lower carbon footprint.",
journal = "Processes",
title = "Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation",
volume = "12",
number = "3",
pages = "520",
doi = "10.3390/pr12030520"
}

Vuksanović, M. M., Milošević, M., Dimitrijević, I., Milentijević, G., Babincev, L., Gržetić, J., Marinković, A.,& Milosavljević, M.. (2024). Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation. in Processes, 12(3), 520.
https://doi.org/10.3390/pr12030520

Vuksanović MM, Milošević M, Dimitrijević I, Milentijević G, Babincev L, Gržetić J, Marinković A, Milosavljević M. Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation. in Processes. 2024;12(3):520.
doi:10.3390/pr12030520 .

Vuksanović, Marija M., Milošević, Milena, Dimitrijević, Ivan, Milentijević, Gordana, Babincev, Ljiljana, Gržetić, Jelena, Marinković, Aleksandar, Milosavljević, Milutin, "Green Plasticizer for Poly(vinyl chloride) Re-Granulate Production: Case Study of Sustainability Concept Implementation" in Processes, 12, no. 3 (2024):520,
https://doi.org/10.3390/pr12030520 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana
AU  - Radovanović, Željko
AU  - Živković, Predrag
AU  - Savić, Andrija B.
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12952
AB  - Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH-Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i da se ostvaruje bolja adhezija između kompozita i metalne podloge nego između kompozita i staklene podloge.
AB  - Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.
T2  - Tehnika
T1  - Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu
T1  - Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass
VL  - 79
IS  - 1
SP  - 9
EP  - 13
DO  - 10.5937/tehnika2401009V
ER  - 

@article{
author = "Vuksanović, Marija M. and Mladenović, Ivana and Radovanović, Željko and Živković, Predrag and Savić, Andrija B. and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH-Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i da se ostvaruje bolja adhezija između kompozita i metalne podloge nego između kompozita i staklene podloge., Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.",
journal = "Tehnika",
title = "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu, Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass",
volume = "79",
number = "1",
pages = "9-13",
doi = "10.5937/tehnika2401009V"
}

Vuksanović, M. M., Mladenović, I., Radovanović, Ž., Živković, P., Savić, A. B., Marinković, A.,& Jančić-Heinemann, R.. (2024). Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika, 79(1), 9-13.
https://doi.org/10.5937/tehnika2401009V

Vuksanović MM, Mladenović I, Radovanović Ž, Živković P, Savić AB, Marinković A, Jančić-Heinemann R. Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika. 2024;79(1):9-13.
doi:10.5937/tehnika2401009V .

Vuksanović, Marija M., Mladenović, Ivana, Radovanović, Željko, Živković, Predrag, Savić, Andrija B., Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAlLDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu" in Tehnika, 79, no. 1 (2024):9-13,
https://doi.org/10.5937/tehnika2401009V . .

TY  - JOUR
AU  - Vuksanović, Marija
AU  - Mladenović, Ivana
AU  - Stupar, Stevan
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12483
AB  - Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification.
T2  - Polymers and Polymer Composites
T1  - Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology
VL  - 32
SP  - 1
EP  - 12
DO  - 10.1177/09673911241228092
ER  - 

@article{
author = "Vuksanović, Marija and Mladenović, Ivana and Stupar, Stevan and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modifiedplant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained fromwaste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the producedsilica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigatethe mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization ofcomposite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) andmeasurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles withvinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and loadfor comparison of measurements between different composite materials and to enable the choice of the material in terms ofoptimization of the quality of reinforcement and quality of interphase determined by surface modification.",
journal = "Polymers and Polymer Composites",
title = "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology",
volume = "32",
pages = "1-12",
doi = "10.1177/09673911241228092"
}

Vuksanović, M., Mladenović, I., Stupar, S., Marinković, A.,& Jančić-Heinemann, R.. (2024). Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites, 32, 1-12.
https://doi.org/10.1177/09673911241228092

Vuksanović M, Mladenović I, Stupar S, Marinković A, Jančić-Heinemann R. Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites. 2024;32:1-12.
doi:10.1177/09673911241228092 .

Vuksanović, Marija, Mladenović, Ivana, Stupar, Stevan, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology" in Polymers and Polymer Composites, 32 (2024):1-12,
https://doi.org/10.1177/09673911241228092 . .

TY  - JOUR
AU  - Elhmali, Houda Taher
AU  - Stajčić, Ivana
AU  - Stajčić, Aleksandar
AU  - Pešić, Ivan
AU  - Jovanović, Marija
AU  - Petrović, Miloš
AU  - Radojević, Vesna
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12718
AB  - While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.
T2  - Polymers
T1  - Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior
VL  - 16
IS  - 2
SP  - 278
DO  - 10.3390/polym16020278
ER  - 

@article{
author = "Elhmali, Houda Taher and Stajčić, Ivana and Stajčić, Aleksandar and Pešić, Ivan and Jovanović, Marija and Petrović, Miloš and Radojević, Vesna",
year = "2024",
abstract = "While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.",
journal = "Polymers",
title = "Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior",
volume = "16",
number = "2",
pages = "278",
doi = "10.3390/polym16020278"
}

Elhmali, H. T., Stajčić, I., Stajčić, A., Pešić, I., Jovanović, M., Petrović, M.,& Radojević, V.. (2024). Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior. in Polymers, 16(2), 278.
https://doi.org/10.3390/polym16020278

Elhmali HT, Stajčić I, Stajčić A, Pešić I, Jovanović M, Petrović M, Radojević V. Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior. in Polymers. 2024;16(2):278.
doi:10.3390/polym16020278 .

Elhmali, Houda Taher, Stajčić, Ivana, Stajčić, Aleksandar, Pešić, Ivan, Jovanović, Marija, Petrović, Miloš, Radojević, Vesna, "Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior" in Polymers, 16, no. 2 (2024):278,
https://doi.org/10.3390/polym16020278 . .

TY  - JOUR
AU  - Savić, Veljko
AU  - Dojčinović, M.
AU  - Topalović, V.
AU  - Cvijović-Alagić, Ivana
AU  - Stojanović, J.
AU  - Matijašević, S.
AU  - Grujić, S.
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12447
AB  - The incombustible portion of coal that remains after burning is known as bottom or fly ash, and it has a detrimental influence on the environment. One of the possible alternatives for reducing the amount of ash deposited in landfills might be the production of useful glass–ceramic from vitrified fly ash. Glass–ceramic was synthesized using fly ash from the thermal power plant "Nikola Tesla" and fluxing additives. Sinter crystallization of the parent glass resulted in glass ceramics. The glass was created by melting a combination of coal fly ash (CFA), Na2CO3, and CaCO3 at T = 1500 °C and quenching the melt in the air. Glass powders were sintered at temperatures 850 and 900 °C. The resulting glass–ceramics were characterized microstructurally, physically, and mechanically. The cavitation erosion of samples was evaluated. The cavitation rate was 0.015 mg/min for the sample sintered at 850 °C and 0.0053 mg/min for the sample sintered at 900 °C. The leaching of heavy metals in glass–ceramic samples was determined using Toxicity Characteristic Leaching Procedure. A low concentration of heavy metals in the leaching solution showed that heavy metals were successfully incorporated in the glass matrix and that obtained glass–ceramics are ecologically safe for usage. Both samples exhibit good resistance to cavitation erosion, suggesting their potential as possible replacements for structural ceramics commonly employed components of hydraulic machinery.
T2  - International Journal of Environmental Science and Technology
T1  - The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash
DO  - 10.1007/s13762-023-05411-9
ER  - 

@article{
author = "Savić, Veljko and Dojčinović, M. and Topalović, V. and Cvijović-Alagić, Ivana and Stojanović, J. and Matijašević, S. and Grujić, S.",
year = "2024",
abstract = "The incombustible portion of coal that remains after burning is known as bottom or fly ash, and it has a detrimental influence on the environment. One of the possible alternatives for reducing the amount of ash deposited in landfills might be the production of useful glass–ceramic from vitrified fly ash. Glass–ceramic was synthesized using fly ash from the thermal power plant "Nikola Tesla" and fluxing additives. Sinter crystallization of the parent glass resulted in glass ceramics. The glass was created by melting a combination of coal fly ash (CFA), Na2CO3, and CaCO3 at T = 1500 °C and quenching the melt in the air. Glass powders were sintered at temperatures 850 and 900 °C. The resulting glass–ceramics were characterized microstructurally, physically, and mechanically. The cavitation erosion of samples was evaluated. The cavitation rate was 0.015 mg/min for the sample sintered at 850 °C and 0.0053 mg/min for the sample sintered at 900 °C. The leaching of heavy metals in glass–ceramic samples was determined using Toxicity Characteristic Leaching Procedure. A low concentration of heavy metals in the leaching solution showed that heavy metals were successfully incorporated in the glass matrix and that obtained glass–ceramics are ecologically safe for usage. Both samples exhibit good resistance to cavitation erosion, suggesting their potential as possible replacements for structural ceramics commonly employed components of hydraulic machinery.",
journal = "International Journal of Environmental Science and Technology",
title = "The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash",
doi = "10.1007/s13762-023-05411-9"
}

Savić, V., Dojčinović, M., Topalović, V., Cvijović-Alagić, I., Stojanović, J., Matijašević, S.,& Grujić, S.. (2024). The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash. in International Journal of Environmental Science and Technology.
https://doi.org/10.1007/s13762-023-05411-9

Savić V, Dojčinović M, Topalović V, Cvijović-Alagić I, Stojanović J, Matijašević S, Grujić S. The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash. in International Journal of Environmental Science and Technology. 2024;.
doi:10.1007/s13762-023-05411-9 .

Savić, Veljko, Dojčinović, M., Topalović, V., Cvijović-Alagić, Ivana, Stojanović, J., Matijašević, S., Grujić, S., "The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash" in International Journal of Environmental Science and Technology (2024),
https://doi.org/10.1007/s13762-023-05411-9 . .

TY  - JOUR
AU  - Matović, Branko
AU  - Maletaškić, Jelena
AU  - Maksimović, Vesna
AU  - Dimitrijević, Stevan P.
AU  - Todorović, Bratislav
AU  - Pejić, Milan
AU  - Zagorac, Dejan
AU  - Zagorac, Jelena B.
AU  - Zeng, Yu-Ping
AU  - Cvijović-Alagić, Ivana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10697
AB  - Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Yb1/7)2(Sn1/3Hf1/3Zr1/3)2O7 were fabricated through a reaction of metal nitrates (A-site) and metal chlorides (B-site) with sodium hydroxide during the solid state displacement reaction. Room temperature synthesis initially resulted in the obtainment of amorphous powders, which crystallized after subsequent calcination to form single crystalline compounds. Crystalline high-entropy ceramic powders formation took place at temperatures as low as 750 °C. During calcination, defective fluorite (F-A2B2O7) and crystal pyrochlore (Py-A2B2O7) structures coexist. A large number of cations induce the obtainment of stable high-entropy pyrochlores. Results showed that sintering at 1650 °C lead to pure crystalline single-phase pyrochlore formation. High-density ceramic, free of additives, was obtained after powders were compacted and subjected to pressureless sintering at 1650 °C. Multicomponent pyrochlore structure was investigated using the theoretical and experimental multi-methodological approach.
T2  - Boletin de la Sociedad Espanola de Ceramica y Vidrio
T1  - Multicomponent solid solution with pyrochlore structure
T1  - Solución sólida multicomponente con estructura de pirocloro
VL  - 62
IS  - 6
SP  - 515
EP  - 526
DO  - 10.1016/j.bsecv.2023.01.005
ER  - 

@article{
author = "Matović, Branko and Maletaškić, Jelena and Maksimović, Vesna and Dimitrijević, Stevan P. and Todorović, Bratislav and Pejić, Milan and Zagorac, Dejan and Zagorac, Jelena B. and Zeng, Yu-Ping and Cvijović-Alagić, Ivana",
year = "2023",
abstract = "Multicomponent oxide with pyrochlore structure (A2B2O7), containing 7 different A-site cations and 3 B-site cations in equiatomic amounts, was synthesized. Powders with nominal composition (La1/7Sm1/7Nd1/7Pr1/7Y1/7Gd1/7Yb1/7)2(Sn1/3Hf1/3Zr1/3)2O7 were fabricated through a reaction of metal nitrates (A-site) and metal chlorides (B-site) with sodium hydroxide during the solid state displacement reaction. Room temperature synthesis initially resulted in the obtainment of amorphous powders, which crystallized after subsequent calcination to form single crystalline compounds. Crystalline high-entropy ceramic powders formation took place at temperatures as low as 750 °C. During calcination, defective fluorite (F-A2B2O7) and crystal pyrochlore (Py-A2B2O7) structures coexist. A large number of cations induce the obtainment of stable high-entropy pyrochlores. Results showed that sintering at 1650 °C lead to pure crystalline single-phase pyrochlore formation. High-density ceramic, free of additives, was obtained after powders were compacted and subjected to pressureless sintering at 1650 °C. Multicomponent pyrochlore structure was investigated using the theoretical and experimental multi-methodological approach.",
journal = "Boletin de la Sociedad Espanola de Ceramica y Vidrio",
title = "Multicomponent solid solution with pyrochlore structure, Solución sólida multicomponente con estructura de pirocloro",
volume = "62",
number = "6",
pages = "515-526",
doi = "10.1016/j.bsecv.2023.01.005"
}

Matović, B., Maletaškić, J., Maksimović, V., Dimitrijević, S. P., Todorović, B., Pejić, M., Zagorac, D., Zagorac, J. B., Zeng, Y.,& Cvijović-Alagić, I.. (2023). Multicomponent solid solution with pyrochlore structure. in Boletin de la Sociedad Espanola de Ceramica y Vidrio, 62(6), 515-526.
https://doi.org/10.1016/j.bsecv.2023.01.005

Matović B, Maletaškić J, Maksimović V, Dimitrijević SP, Todorović B, Pejić M, Zagorac D, Zagorac JB, Zeng Y, Cvijović-Alagić I. Multicomponent solid solution with pyrochlore structure. in Boletin de la Sociedad Espanola de Ceramica y Vidrio. 2023;62(6):515-526.
doi:10.1016/j.bsecv.2023.01.005 .

Matović, Branko, Maletaškić, Jelena, Maksimović, Vesna, Dimitrijević, Stevan P., Todorović, Bratislav, Pejić, Milan, Zagorac, Dejan, Zagorac, Jelena B., Zeng, Yu-Ping, Cvijović-Alagić, Ivana, "Multicomponent solid solution with pyrochlore structure" in Boletin de la Sociedad Espanola de Ceramica y Vidrio, 62, no. 6 (2023):515-526,
https://doi.org/10.1016/j.bsecv.2023.01.005 . .

TY  - JOUR
AU  - Stupar, Stevan
AU  - Vuksanović, Marija M.
AU  - Mijin, Dušan Ž.
AU  - Bučko, Mihael M.
AU  - Joksimović, Vasilija J.
AU  - Barudžija, Tanja
AU  - Tanić, Milan N.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10606
AB  - The presented research focused on the metallization of polyester, cotton, and polyamide 6.6 fabrics using the silver conductive complex to allow electric conductivity through the fabric's surface and enhance the fabric's mechanical properties. The method used for the metallization of studied fabrics does not require the use of expensive toxic chemicals or electricity, making the process more economically acceptable. The signal attenuation was measured in frequency ranges of 1–4 and 5–12 GHz. After five cycles of metallization, the polyester fabric has higher EMI effectiveness, in a lower range was 45.44 and 57.25 dB. X-ray powder diffractometry (XRD) and infrared spectroscopy with Fourier transform infrared spectrophotometry (FT-IR) characterize the modified tissues. Scanning electron microscopy coupled with energy-dispersion spectroscopy (SEM-EDS) was used to determine layers' morphology and elemental composition. Also, the water and air permeability of modified textiles was determined.
T2  - Materials Today Communications
T1  - Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding
VL  - 34
SP  - 105312
DO  - 10.1016/j.mtcomm.2023.105312
ER  - 

@article{
author = "Stupar, Stevan and Vuksanović, Marija M. and Mijin, Dušan Ž. and Bučko, Mihael M. and Joksimović, Vasilija J. and Barudžija, Tanja and Tanić, Milan N.",
year = "2023",
abstract = "The presented research focused on the metallization of polyester, cotton, and polyamide 6.6 fabrics using the silver conductive complex to allow electric conductivity through the fabric's surface and enhance the fabric's mechanical properties. The method used for the metallization of studied fabrics does not require the use of expensive toxic chemicals or electricity, making the process more economically acceptable. The signal attenuation was measured in frequency ranges of 1–4 and 5–12 GHz. After five cycles of metallization, the polyester fabric has higher EMI effectiveness, in a lower range was 45.44 and 57.25 dB. X-ray powder diffractometry (XRD) and infrared spectroscopy with Fourier transform infrared spectrophotometry (FT-IR) characterize the modified tissues. Scanning electron microscopy coupled with energy-dispersion spectroscopy (SEM-EDS) was used to determine layers' morphology and elemental composition. Also, the water and air permeability of modified textiles was determined.",
journal = "Materials Today Communications",
title = "Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding",
volume = "34",
pages = "105312",
doi = "10.1016/j.mtcomm.2023.105312"
}

Stupar, S., Vuksanović, M. M., Mijin, D. Ž., Bučko, M. M., Joksimović, V. J., Barudžija, T.,& Tanić, M. N.. (2023). Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding. in Materials Today Communications, 34, 105312.
https://doi.org/10.1016/j.mtcomm.2023.105312

Stupar S, Vuksanović MM, Mijin DŽ, Bučko MM, Joksimović VJ, Barudžija T, Tanić MN. Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding. in Materials Today Communications. 2023;34:105312.
doi:10.1016/j.mtcomm.2023.105312 .

Stupar, Stevan, Vuksanović, Marija M., Mijin, Dušan Ž., Bučko, Mihael M., Joksimović, Vasilija J., Barudžija, Tanja, Tanić, Milan N., "Functional nano-silver decorated textiles for wearable electronics and electromagnetic interference shielding" in Materials Today Communications, 34 (2023):105312,
https://doi.org/10.1016/j.mtcomm.2023.105312 . .

TY  - JOUR
AU  - Batinić, Petar M.
AU  - Đorđević, Verica B.
AU  - Obradović, Nataša
AU  - Krstić, Aleksandar D.
AU  - Stevanović, Sanja I.
AU  - Balanč, Bojana
AU  - Marković, Smilja
AU  - Pjanović, Rada V.
AU  - Mijin, Dušan Ž.
AU  - Bugarski, Branko M.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10851
AB  - Liposome-encapsulated folic acid is incorporated into the films made from sodium carboxymethyl cellulose (CMC) (2 mas%) and a mixture of CMC and solagum (9:1 w/w) using the film-forming cast solution method. Histidine is used to increase solubility for folic acid in liposomes (1–5 mg mL−1), and propylene glycol is used as a film plasticizer (2.6 mas%). The obtained films (50–60 µm tick) containing 3.12–20.19 mg of folic acid per gram of film are envisaged to be used as patches for transdermal delivery of folic acid. Therefore, some physical, mechanical, release and structural attributes of the films are scrutinized. Folic acid gives yellow color to the films and contributes to stronger chemical bonds which result in improved strength of the film. Liposomes prolong the release of folic acid from films to 24 h without adverse effects on mechanical properties of the films, but degrade homogeneity of the films, which can be ascribed to its agglomeration within the film matrix as revealed by atomic force microscopy. According to the release at pH 5.5, the film formulation based on a blend of CMC and solagum containing 3 mg mL−1 liposome-encapsulated folic acid is recommended. Practical Application: Folic acid is effective in reducing oxidative stress levels in the skin and neutralizing the harmful free radicals and is also essential for various metabolic reactions in the body. However, the limited solubility of folic acid linked with its poor absorption in an organism, low storage stability, short half-life upon oral consumption, specific food preferences of some people, extensive liver metabolism, and pregnancy-induced vomiting point to a large potential in transdermal usage of folic acid. This has motivated us to design new multicomponent polymer-lipid systems as an alternative solution to overcome some of these drawbacks. The results obtained for these multicomponent films pointed to their potential for prolonged release of folic acid to 24 h, which can also be useful for scientists interested in encapsulating similar poorly soluble compounds in CMC patches. The finding can be also valuable information for pharmaceutical manufacturers and scientists worldwide.
T2  - European Journal of Lipid Science and Technology
T1  - Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid
SP  - 2200169
DO  - 10.1002/ejlt.202200169
ER  - 

@article{
author = "Batinić, Petar M. and Đorđević, Verica B. and Obradović, Nataša and Krstić, Aleksandar D. and Stevanović, Sanja I. and Balanč, Bojana and Marković, Smilja and Pjanović, Rada V. and Mijin, Dušan Ž. and Bugarski, Branko M.",
year = "2023",
abstract = "Liposome-encapsulated folic acid is incorporated into the films made from sodium carboxymethyl cellulose (CMC) (2 mas%) and a mixture of CMC and solagum (9:1 w/w) using the film-forming cast solution method. Histidine is used to increase solubility for folic acid in liposomes (1–5 mg mL−1), and propylene glycol is used as a film plasticizer (2.6 mas%). The obtained films (50–60 µm tick) containing 3.12–20.19 mg of folic acid per gram of film are envisaged to be used as patches for transdermal delivery of folic acid. Therefore, some physical, mechanical, release and structural attributes of the films are scrutinized. Folic acid gives yellow color to the films and contributes to stronger chemical bonds which result in improved strength of the film. Liposomes prolong the release of folic acid from films to 24 h without adverse effects on mechanical properties of the films, but degrade homogeneity of the films, which can be ascribed to its agglomeration within the film matrix as revealed by atomic force microscopy. According to the release at pH 5.5, the film formulation based on a blend of CMC and solagum containing 3 mg mL−1 liposome-encapsulated folic acid is recommended. Practical Application: Folic acid is effective in reducing oxidative stress levels in the skin and neutralizing the harmful free radicals and is also essential for various metabolic reactions in the body. However, the limited solubility of folic acid linked with its poor absorption in an organism, low storage stability, short half-life upon oral consumption, specific food preferences of some people, extensive liver metabolism, and pregnancy-induced vomiting point to a large potential in transdermal usage of folic acid. This has motivated us to design new multicomponent polymer-lipid systems as an alternative solution to overcome some of these drawbacks. The results obtained for these multicomponent films pointed to their potential for prolonged release of folic acid to 24 h, which can also be useful for scientists interested in encapsulating similar poorly soluble compounds in CMC patches. The finding can be also valuable information for pharmaceutical manufacturers and scientists worldwide.",
journal = "European Journal of Lipid Science and Technology",
title = "Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid",
pages = "2200169",
doi = "10.1002/ejlt.202200169"
}

Batinić, P. M., Đorđević, V. B., Obradović, N., Krstić, A. D., Stevanović, S. I., Balanč, B., Marković, S., Pjanović, R. V., Mijin, D. Ž.,& Bugarski, B. M.. (2023). Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid. in European Journal of Lipid Science and Technology, 2200169.
https://doi.org/10.1002/ejlt.202200169

Batinić PM, Đorđević VB, Obradović N, Krstić AD, Stevanović SI, Balanč B, Marković S, Pjanović RV, Mijin DŽ, Bugarski BM. Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid. in European Journal of Lipid Science and Technology. 2023;:2200169.
doi:10.1002/ejlt.202200169 .

Batinić, Petar M., Đorđević, Verica B., Obradović, Nataša, Krstić, Aleksandar D., Stevanović, Sanja I., Balanč, Bojana, Marković, Smilja, Pjanović, Rada V., Mijin, Dušan Ž., Bugarski, Branko M., "Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid" in European Journal of Lipid Science and Technology (2023):2200169,
https://doi.org/10.1002/ejlt.202200169 . .

TY  - CONF
AU  - Tadić, Julijana
AU  - Gazikalović, Ivana
AU  - Mašulović, Aleksandra
AU  - Svetozarević, Milica
AU  - Porobić, Slavica
AU  - Mijin, Dušan
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11597
AB  - Heterociklična azo jedinjenja predstavljaju značajnu klasnu organskih sintetskih boja. Pored njihovih izuzetnih svojstava za bojenje, heterociklična azo jedinjenja imaju i biološku aktivnost. Mnoge  studije pokazuju da azo boje sa heterocikličnim fragmentima u strukturi mogu ispoljavati antibakterijska, antifungalna, antivirusna, antiinflamatorna i antikancerogena svojstva. Rezistencija mikroorganizama na postojeće antimikrobne agense predstavlja jedan odnajvećih problema u svet-skom zdravstvu. Zbog toga je razvijanje novih molekula sa antimikrobnim svojstvima kako značajno, tako i neophodno za globalno očuvanje zdravlja. U ovom radu, ispitivanje antimikrobne aktivnosti dve  Biđineli-azo  piridonske  boje  je urađeno  pomoću  metode  difuzije  na  agarnoj  podlozi.  Anti-mikrobna  svojstva  su  ispitana  prema  patogenim  sojevima  Staphylococcus  aureus  (Gram-pozitivna bakterija), Escherichia coli (Gram-negativna bakterija) i Candida albicans (oportunistički kvasac). Preliminarni rezultati istraživanja ukazali su na antimikrobni potencijal ispitivanih azo jedinjenja.
AB  - The heterocyclic azo dyes represent significant synthetic organic colorants. In addition to their exceptional coloration properties, heterocyclic azo compounds exhibit antibacterial, antifungal, an-tiviral, antioxidant, anti-inflammatory and anticancer properties. The antimicrobial resistance is one of the major problems for global public health. Therefore, finding new organic structures with anti-microbial properties represents a challenging research field. In this study, antimicrobial screening of two Biginelli-based azo pyridone dyes has been carried out. The antimicrobial activity of synthe-tized dyes wasstudied against bacteria (Staphylococcus aureus, Escherichia coli) and yeast (Candida albicans), using agar diffusion method. The preliminary research results indicate the antimicrobial potential of the investigated compounds
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS) : Društvo za procesnu tehniku
C3  - 35. Međunarodni kongres o procesnoj industriji - PROCESING ′22 : zbornik radova
T1  - Ispitivanje antimikrobnih svojstava nekih biđineli-azo piridonskih boja
T1  - The antimicrobial evaluation of some biginelli-based azo pyridone dyes
SP  - 25
EP  - 28
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11232
ER  - 

@conference{
author = "Tadić, Julijana and Gazikalović, Ivana and Mašulović, Aleksandra and Svetozarević, Milica and Porobić, Slavica and Mijin, Dušan",
year = "2023",
abstract = "Heterociklična azo jedinjenja predstavljaju značajnu klasnu organskih sintetskih boja. Pored njihovih izuzetnih svojstava za bojenje, heterociklična azo jedinjenja imaju i biološku aktivnost. Mnoge  studije pokazuju da azo boje sa heterocikličnim fragmentima u strukturi mogu ispoljavati antibakterijska, antifungalna, antivirusna, antiinflamatorna i antikancerogena svojstva. Rezistencija mikroorganizama na postojeće antimikrobne agense predstavlja jedan odnajvećih problema u svet-skom zdravstvu. Zbog toga je razvijanje novih molekula sa antimikrobnim svojstvima kako značajno, tako i neophodno za globalno očuvanje zdravlja. U ovom radu, ispitivanje antimikrobne aktivnosti dve  Biđineli-azo  piridonske  boje  je urađeno  pomoću  metode  difuzije  na  agarnoj  podlozi.  Anti-mikrobna  svojstva  su  ispitana  prema  patogenim  sojevima  Staphylococcus  aureus  (Gram-pozitivna bakterija), Escherichia coli (Gram-negativna bakterija) i Candida albicans (oportunistički kvasac). Preliminarni rezultati istraživanja ukazali su na antimikrobni potencijal ispitivanih azo jedinjenja., The heterocyclic azo dyes represent significant synthetic organic colorants. In addition to their exceptional coloration properties, heterocyclic azo compounds exhibit antibacterial, antifungal, an-tiviral, antioxidant, anti-inflammatory and anticancer properties. The antimicrobial resistance is one of the major problems for global public health. Therefore, finding new organic structures with anti-microbial properties represents a challenging research field. In this study, antimicrobial screening of two Biginelli-based azo pyridone dyes has been carried out. The antimicrobial activity of synthe-tized dyes wasstudied against bacteria (Staphylococcus aureus, Escherichia coli) and yeast (Candida albicans), using agar diffusion method. The preliminary research results indicate the antimicrobial potential of the investigated compounds",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS) : Društvo za procesnu tehniku",
journal = "35. Međunarodni kongres o procesnoj industriji - PROCESING ′22 : zbornik radova",
title = "Ispitivanje antimikrobnih svojstava nekih biđineli-azo piridonskih boja, The antimicrobial evaluation of some biginelli-based azo pyridone dyes",
pages = "25-28",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11232"
}

Tadić, J., Gazikalović, I., Mašulović, A., Svetozarević, M., Porobić, S.,& Mijin, D.. (2023). Ispitivanje antimikrobnih svojstava nekih biđineli-azo piridonskih boja. in 35. Međunarodni kongres o procesnoj industriji - PROCESING ′22 : zbornik radova
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS) : Društvo za procesnu tehniku., 25-28.
https://hdl.handle.net/21.15107/rcub_vinar_11232

Tadić J, Gazikalović I, Mašulović A, Svetozarević M, Porobić S, Mijin D. Ispitivanje antimikrobnih svojstava nekih biđineli-azo piridonskih boja. in 35. Međunarodni kongres o procesnoj industriji - PROCESING ′22 : zbornik radova. 2023;:25-28.
https://hdl.handle.net/21.15107/rcub_vinar_11232 .

Tadić, Julijana, Gazikalović, Ivana, Mašulović, Aleksandra, Svetozarević, Milica, Porobić, Slavica, Mijin, Dušan, "Ispitivanje antimikrobnih svojstava nekih biđineli-azo piridonskih boja" in 35. Međunarodni kongres o procesnoj industriji - PROCESING ′22 : zbornik radova (2023):25-28,
https://hdl.handle.net/21.15107/rcub_vinar_11232 .

TY  - JOUR
AU  - Radetić, Tamara
AU  - Popović, Miljana M.
AU  - Novaković, Mirjana M.
AU  - Rajić, Vladimir
AU  - Romhanji, Endre L.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12726
AB  - The Fe-bearing intermetallic phases present in the as-cast AA6026 alloy and their evolution during homogenization treatments at 480-550°C were investigated using optical microscopy, SEM, and TEM techniques in combination with EDS analysis. In addition to the α-Al(Fe,Mn)Si phase with dendritic morphology, two types of plate-like Fe-bearing microconstituents were revealed in the microstructure of the as-cast alloy. The EDS microanalysis and electron diffraction showed that one set of platelets represented thin sections of α-Al(Fe,Mn)Si microconstituent. The other set of plate-like microconstituents was identified as a tetragonal, silicon-rich δ-Al4(Fe,Mn)Si2 phase. The formation of the δ-Al4(Fe,Mn)Si2 phase was attributed to the chemical composition of the alloy. During homogenization, the metastable δ-Al4(Fe,Mn)Si2 transformed into the α-Al(Fe,Mn)Si phase and fragmented. The dendritic α-Al(Fe,Mn)Si microconstituents underwent fragmentation. However, while the α-Al(Fe,Mn)Si microconstituents preserved a b.c.c. crystal lattice throughout the process, the product of the transformation of the δ-Al4(Fe,Mn)Si2 phase exhibited primitive cubic lattice.
AB  - Ispitivanje prisustva faza koje sadrže Fe u mikrostrukturi livene legure AA6026, kao i njihova evolucija tokom postupaka homogenizacije na temperaturama od 480-550 °C, sprovedena su korišćenjem optičke mikroskopije, skenirajuće elektronske mikroskopije (SEM) i transmisione elektronske mikroskopije (TEM) u kombinaciji sa analizom EDS-a. Osim faze α-Al(Fe,Mn)Si sa dendritskom morfologijom, identifikovane su dve vrste pločastih mikrokonstituenata koji sadrže Fe u mikrostrukturi livene legure. EDS mikroanaliza i elektronska difrakcija pokazali su da jedan skup ploča predstavlja samo tanke sekcije mikrokonstituente α-Al(Fe,Mn)Si. Drugi skup pločastih mikrokonstituenata identifikovan je kao četvrtasta, silicijumom bogata faza δ-Al4 (Fe,Mn)Si2 . Formiranje faze δ-Al4 (Fe,Mn)Si2 povezano je sa hemijskim sastavom legure. Tokom homogenizacije, metastabilna faza δ-Al4 (Fe,Mn)Si2 transformisala se u fazu α-Al(Fe,Mn)Si i fragmentirala. Dendritski mikrokonstituenti α-Al(Fe,Mn)Si takođe su fragmentirali. Međutim, dok su mikrokonstituenti α-Al(Fe,Mn)Si sačuvali kubnu kristalnu rešetku tipa b.c.c. tokom procesa, proizvod transformacije faze δ-Al4 (Fe,Mn)Si2 pokazao je prostu kubnu rešetku.
T2  - Journal of Mining and Metallurgy, Section B: Metallurgy
T1  - Identification of Fe-bearing phases in the as-cast microstructure of AA6026 alloy and their evolution during homogenization treatment
T1  - Prepoznavanje faza koje sadrže Fe u mikrostrukturi livene legure AA6026 i njihova evolucija tokom postupka homogenizacije
VL  - 59
IS  - 2
SP  - 327
EP  - 338
DO  - 10.2298/JMMB230611028R
ER  - 

@article{
author = "Radetić, Tamara and Popović, Miljana M. and Novaković, Mirjana M. and Rajić, Vladimir and Romhanji, Endre L.",
year = "2023",
abstract = "The Fe-bearing intermetallic phases present in the as-cast AA6026 alloy and their evolution during homogenization treatments at 480-550°C were investigated using optical microscopy, SEM, and TEM techniques in combination with EDS analysis. In addition to the α-Al(Fe,Mn)Si phase with dendritic morphology, two types of plate-like Fe-bearing microconstituents were revealed in the microstructure of the as-cast alloy. The EDS microanalysis and electron diffraction showed that one set of platelets represented thin sections of α-Al(Fe,Mn)Si microconstituent. The other set of plate-like microconstituents was identified as a tetragonal, silicon-rich δ-Al4(Fe,Mn)Si2 phase. The formation of the δ-Al4(Fe,Mn)Si2 phase was attributed to the chemical composition of the alloy. During homogenization, the metastable δ-Al4(Fe,Mn)Si2 transformed into the α-Al(Fe,Mn)Si phase and fragmented. The dendritic α-Al(Fe,Mn)Si microconstituents underwent fragmentation. However, while the α-Al(Fe,Mn)Si microconstituents preserved a b.c.c. crystal lattice throughout the process, the product of the transformation of the δ-Al4(Fe,Mn)Si2 phase exhibited primitive cubic lattice., Ispitivanje prisustva faza koje sadrže Fe u mikrostrukturi livene legure AA6026, kao i njihova evolucija tokom postupaka homogenizacije na temperaturama od 480-550 °C, sprovedena su korišćenjem optičke mikroskopije, skenirajuće elektronske mikroskopije (SEM) i transmisione elektronske mikroskopije (TEM) u kombinaciji sa analizom EDS-a. Osim faze α-Al(Fe,Mn)Si sa dendritskom morfologijom, identifikovane su dve vrste pločastih mikrokonstituenata koji sadrže Fe u mikrostrukturi livene legure. EDS mikroanaliza i elektronska difrakcija pokazali su da jedan skup ploča predstavlja samo tanke sekcije mikrokonstituente α-Al(Fe,Mn)Si. Drugi skup pločastih mikrokonstituenata identifikovan je kao četvrtasta, silicijumom bogata faza δ-Al4 (Fe,Mn)Si2 . Formiranje faze δ-Al4 (Fe,Mn)Si2 povezano je sa hemijskim sastavom legure. Tokom homogenizacije, metastabilna faza δ-Al4 (Fe,Mn)Si2 transformisala se u fazu α-Al(Fe,Mn)Si i fragmentirala. Dendritski mikrokonstituenti α-Al(Fe,Mn)Si takođe su fragmentirali. Međutim, dok su mikrokonstituenti α-Al(Fe,Mn)Si sačuvali kubnu kristalnu rešetku tipa b.c.c. tokom procesa, proizvod transformacije faze δ-Al4 (Fe,Mn)Si2 pokazao je prostu kubnu rešetku.",
journal = "Journal of Mining and Metallurgy, Section B: Metallurgy",
title = "Identification of Fe-bearing phases in the as-cast microstructure of AA6026 alloy and their evolution during homogenization treatment, Prepoznavanje faza koje sadrže Fe u mikrostrukturi livene legure AA6026 i njihova evolucija tokom postupka homogenizacije",
volume = "59",
number = "2",
pages = "327-338",
doi = "10.2298/JMMB230611028R"
}

Radetić, T., Popović, M. M., Novaković, M. M., Rajić, V.,& Romhanji, E. L.. (2023). Identification of Fe-bearing phases in the as-cast microstructure of AA6026 alloy and their evolution during homogenization treatment. in Journal of Mining and Metallurgy, Section B: Metallurgy, 59(2), 327-338.
https://doi.org/10.2298/JMMB230611028R

Radetić T, Popović MM, Novaković MM, Rajić V, Romhanji EL. Identification of Fe-bearing phases in the as-cast microstructure of AA6026 alloy and their evolution during homogenization treatment. in Journal of Mining and Metallurgy, Section B: Metallurgy. 2023;59(2):327-338.
doi:10.2298/JMMB230611028R .

Radetić, Tamara, Popović, Miljana M., Novaković, Mirjana M., Rajić, Vladimir, Romhanji, Endre L., "Identification of Fe-bearing phases in the as-cast microstructure of AA6026 alloy and their evolution during homogenization treatment" in Journal of Mining and Metallurgy, Section B: Metallurgy, 59, no. 2 (2023):327-338,
https://doi.org/10.2298/JMMB230611028R . .

TY  - JOUR
AU  - Knežević, Nataša
AU  - Milanović, Jovana Z.
AU  - Veličković, Zlate
AU  - Milošević, Milena
AU  - Vuksanović, Marija M.
AU  - Onjia, Antonije
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11373
AB  - Oxidized cotton linters, TOCell, were used as an adsorbent or derived membrane there from by linterscross-linking with citric acid. The adsorption/desorption study of Pb2+, methylene blue (MB), and crystalviolet (CV) removal, was performed. Adsorption data fitting, obtained using the Langmuir model, gave116 mg g 1 (Pb2+), 179 mg g 1 (MB) and 482 mg g 1 (CV) at 25 ℃ for TOCell linters, while 101 mg g 1(Pb2+), 165 mg g 1 (MB) and 426 mg g 1 (CV) for TOCell membrane. After desorption dyes were subjectedto photocatalytic degradation while lead was transformed into stable lead phthalate (LP), and furtherused as filler in composites based on unsaturated polyester resins (UPR). UPR was synthesized fromwaste polyethylene terephthalate (PET). Structural characterization was performed using FTIR, SEM,and NMR methods. Composites loaded with acryloyl modified kraft lignin (A-KfL) and/or LP was testedfor tensile strength, Vickers microhardness, and fire resistance (UL-94 V method). The best mechanicaland fireproofing properties were obtained at 15 wt.% A-KfL and 40 wt.% Al(OH)3 addition. The resultsof the toxicity leaching test (TCLP) confirmed the environmentally safe stabilization of desorbed pollutantin the UPR matrix. Application of environmentally friendly membranes, susceptible to easy biodegradation, had low negative effects to the environment.
T2  - Journal of Industrial and Engineering Chemistry
T1  - A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane
VL  - 126
SP  - 520
EP  - 536
DO  - 10.1016/j.jiec.2023.06.041
ER  - 

@article{
author = "Knežević, Nataša and Milanović, Jovana Z. and Veličković, Zlate and Milošević, Milena and Vuksanović, Marija M. and Onjia, Antonije and Marinković, Aleksandar",
year = "2023",
abstract = "Oxidized cotton linters, TOCell, were used as an adsorbent or derived membrane there from by linterscross-linking with citric acid. The adsorption/desorption study of Pb2+, methylene blue (MB), and crystalviolet (CV) removal, was performed. Adsorption data fitting, obtained using the Langmuir model, gave116 mg g 1 (Pb2+), 179 mg g 1 (MB) and 482 mg g 1 (CV) at 25 ℃ for TOCell linters, while 101 mg g 1(Pb2+), 165 mg g 1 (MB) and 426 mg g 1 (CV) for TOCell membrane. After desorption dyes were subjectedto photocatalytic degradation while lead was transformed into stable lead phthalate (LP), and furtherused as filler in composites based on unsaturated polyester resins (UPR). UPR was synthesized fromwaste polyethylene terephthalate (PET). Structural characterization was performed using FTIR, SEM,and NMR methods. Composites loaded with acryloyl modified kraft lignin (A-KfL) and/or LP was testedfor tensile strength, Vickers microhardness, and fire resistance (UL-94 V method). The best mechanicaland fireproofing properties were obtained at 15 wt.% A-KfL and 40 wt.% Al(OH)3 addition. The resultsof the toxicity leaching test (TCLP) confirmed the environmentally safe stabilization of desorbed pollutantin the UPR matrix. Application of environmentally friendly membranes, susceptible to easy biodegradation, had low negative effects to the environment.",
journal = "Journal of Industrial and Engineering Chemistry",
title = "A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane",
volume = "126",
pages = "520-536",
doi = "10.1016/j.jiec.2023.06.041"
}

Knežević, N., Milanović, J. Z., Veličković, Z., Milošević, M., Vuksanović, M. M., Onjia, A.,& Marinković, A.. (2023). A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane. in Journal of Industrial and Engineering Chemistry, 126, 520-536.
https://doi.org/10.1016/j.jiec.2023.06.041

Knežević N, Milanović JZ, Veličković Z, Milošević M, Vuksanović MM, Onjia A, Marinković A. A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane. in Journal of Industrial and Engineering Chemistry. 2023;126:520-536.
doi:10.1016/j.jiec.2023.06.041 .

Knežević, Nataša, Milanović, Jovana Z., Veličković, Zlate, Milošević, Milena, Vuksanović, Marija M., Onjia, Antonije, Marinković, Aleksandar, "A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane" in Journal of Industrial and Engineering Chemistry, 126 (2023):520-536,
https://doi.org/10.1016/j.jiec.2023.06.041 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Milošević, Milena
AU  - Knežević, Nataša
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Mladenović, Ivana
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11444
AB  - Predmet ovog istraživanja je postupak proizvodnje regranulata polivinil hlorida (PVC) korišćenjem plastifikatora sintetisanog iz recikliranog poli(etilen tereftalata) (PET). Na ovaj način je sintetisan plastifikator koji ne predstavlja rizik po zdravlje ljudi i životnu sredinu u skladu sa prinicima hemijskog lizinga i zelene hemije. Dobijeni plastifikator je okarakterisan primenom elementalne analize, FTIR, i NMR spektroskopije i određivanjem hidroksilnog i kiselinskog broja. Ispitivana su mehanička svojstva materijala dobijenih na bazi recikliranog PVC i plastifikatora iz PET-a prema standardnim metodama.
AB  - The subject of this research is the production process of polyvinyl chloride (PVC) regranulate using a plasticizer synthesized from recycled poly(ethylene terephthalate) (PET). In this way, a plasticizer was synthesized that does not pose a risk to human health and the environment in accordance with the principles of chemical leasing and green chemistry. The obtained plasticizer was characterized using elemental analysis, FTIR, and NMR spectroscopy and determination of hydroxyl and acid number. The mechanical properties of materials obtained on the basis of recycled PVC and plasticizers from PET were tested according to standard methods.
T2  - Tehnika
T1  - Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a
T1  - Testing of the mechanical properties of reggranulate PVC with the addition of plasticizer from waste PET
VL  - 78
IS  - 4
SP  - 389
EP  - 394
DO  - 10.5937/tehnika2304389V
ER  - 

@article{
author = "Vuksanović, Marija M. and Milošević, Milena and Knežević, Nataša and Egelja, Adela and Janković-Mandić, Ljiljana and Mladenović, Ivana and Marinković, Aleksandar",
year = "2023",
abstract = "Predmet ovog istraživanja je postupak proizvodnje regranulata polivinil hlorida (PVC) korišćenjem plastifikatora sintetisanog iz recikliranog poli(etilen tereftalata) (PET). Na ovaj način je sintetisan plastifikator koji ne predstavlja rizik po zdravlje ljudi i životnu sredinu u skladu sa prinicima hemijskog lizinga i zelene hemije. Dobijeni plastifikator je okarakterisan primenom elementalne analize, FTIR, i NMR spektroskopije i određivanjem hidroksilnog i kiselinskog broja. Ispitivana su mehanička svojstva materijala dobijenih na bazi recikliranog PVC i plastifikatora iz PET-a prema standardnim metodama., The subject of this research is the production process of polyvinyl chloride (PVC) regranulate using a plasticizer synthesized from recycled poly(ethylene terephthalate) (PET). In this way, a plasticizer was synthesized that does not pose a risk to human health and the environment in accordance with the principles of chemical leasing and green chemistry. The obtained plasticizer was characterized using elemental analysis, FTIR, and NMR spectroscopy and determination of hydroxyl and acid number. The mechanical properties of materials obtained on the basis of recycled PVC and plasticizers from PET were tested according to standard methods.",
journal = "Tehnika",
title = "Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a, Testing of the mechanical properties of reggranulate PVC with the addition of plasticizer from waste PET",
volume = "78",
number = "4",
pages = "389-394",
doi = "10.5937/tehnika2304389V"
}

Vuksanović, M. M., Milošević, M., Knežević, N., Egelja, A., Janković-Mandić, L., Mladenović, I.,& Marinković, A.. (2023). Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a. in Tehnika, 78(4), 389-394.
https://doi.org/10.5937/tehnika2304389V

Vuksanović MM, Milošević M, Knežević N, Egelja A, Janković-Mandić L, Mladenović I, Marinković A. Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a. in Tehnika. 2023;78(4):389-394.
doi:10.5937/tehnika2304389V .

Vuksanović, Marija M., Milošević, Milena, Knežević, Nataša, Egelja, Adela, Janković-Mandić, Ljiljana, Mladenović, Ivana, Marinković, Aleksandar, "Ispitivanje mehaničkih svojstava regranulata PVC-a sa dodatkom plastifikatora iz otpadnog PET-a" in Tehnika, 78, no. 4 (2023):389-394,
https://doi.org/10.5937/tehnika2304389V . .

TY  - JOUR
AU  - Salah Adeen Embirsh, Hifa
AU  - Stajčić, Ivana
AU  - Gržetić, Jelena
AU  - Mladenović, Ivana O.
AU  - Anđelković, Boban
AU  - Marinković, Aleksandar
AU  - Vuksanović, Marija M.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11638
AB  - This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol(PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained fromrice husk. The structural and morphological properties of the obtained particles, b-UPR, as well ascomposites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magneticresonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electronmicroscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanicalproperties of composites was supported by hardness modeling. Improvement of the tensile strengthof the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named“b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process appliedto the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR).The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of atable top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, aswell as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainablecomposites that are chemically synthesized from renewable sources is important from the aspect ofpreserving the environment and existing resources as well as the extending their life cycle.
T2  - Polymers
T1  - Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles
VL  - 15
IS  - 18
SP  - 3756
DO  - 10.3390/polym15183756
ER  - 

@article{
author = "Salah Adeen Embirsh, Hifa and Stajčić, Ivana and Gržetić, Jelena and Mladenović, Ivana O. and Anđelković, Boban and Marinković, Aleksandar and Vuksanović, Marija M.",
year = "2023",
abstract = "This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol(PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained fromrice husk. The structural and morphological properties of the obtained particles, b-UPR, as well ascomposites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magneticresonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electronmicroscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanicalproperties of composites was supported by hardness modeling. Improvement of the tensile strengthof the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named“b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process appliedto the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR).The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of atable top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, aswell as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainablecomposites that are chemically synthesized from renewable sources is important from the aspect ofpreserving the environment and existing resources as well as the extending their life cycle.",
journal = "Polymers",
title = "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles",
volume = "15",
number = "18",
pages = "3756",
doi = "10.3390/polym15183756"
}

Salah Adeen Embirsh, H., Stajčić, I., Gržetić, J., Mladenović, I. O., Anđelković, B., Marinković, A.,& Vuksanović, M. M.. (2023). Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers, 15(18), 3756.
https://doi.org/10.3390/polym15183756

Salah Adeen Embirsh H, Stajčić I, Gržetić J, Mladenović IO, Anđelković B, Marinković A, Vuksanović MM. Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers. 2023;15(18):3756.
doi:10.3390/polym15183756 .

Salah Adeen Embirsh, Hifa, Stajčić, Ivana, Gržetić, Jelena, Mladenović, Ivana O., Anđelković, Boban, Marinković, Aleksandar, Vuksanović, Marija M., "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles" in Polymers, 15, no. 18 (2023):3756,
https://doi.org/10.3390/polym15183756 . .

TY  - JOUR
AU  - Mladenović, Ivana O.
AU  - Vuksanović, Marija M.
AU  - Dimitrijević, Stevan P.
AU  - Vasilić, Rastko
AU  - Radojević, Vesna J.
AU  - Vasiljević-Radović, Dana G.
AU  - Nikolić, Nebojša D.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12396
AB  - Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.
T2  - Metals
T1  - Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
VL  - 13
IS  - 12
SP  - 1979
DO  - 10.3390/met13121979
ER  - 

@article{
author = "Mladenović, Ivana O. and Vuksanović, Marija M. and Dimitrijević, Stevan P. and Vasilić, Rastko and Radojević, Vesna J. and Vasiljević-Radović, Dana G. and Nikolić, Nebojša D.",
year = "2023",
abstract = "Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic regime. Morphological, structural, and roughness analysis of the pigment particles, the pure (pigment-free) Cu coating, and the Cu coatings with incorporated pigment particles were performed using SEM, XRD, and AFM techniques, respectively. Hardness and creep resistance were considered for the examination of the mechanical properties of the Cu coatings, applying Chicot–Lesage (for hardness) and Sargent–Ashby (for creep resistance) mathematical models. The wettability of the Cu coatings was examined by the static sessile drop method by a measurement of the water contact angle. The incorporation of pigment particles in the Cu deposits did not significantly affect the morphology or texture of the coatings, while the roughness of the deposits rose with the rise in pigment particle concentrations. The hardness of the Cu coatings also increased with the increasing concentration of pigments and was greater than that obtained for the pigment-free Cu coating. The presence of the pigments caused a change in the wettability of the Cu coatings from hydrophilic (for the pigment-free Cu coating) to hydrophobic (for Cu coatings with incorporated particles) surface areas.",
journal = "Metals",
title = "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles",
volume = "13",
number = "12",
pages = "1979",
doi = "10.3390/met13121979"
}

Mladenović, I. O., Vuksanović, M. M., Dimitrijević, S. P., Vasilić, R., Radojević, V. J., Vasiljević-Radović, D. G.,& Nikolić, N. D.. (2023). Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals, 13(12), 1979.
https://doi.org/10.3390/met13121979

Mladenović IO, Vuksanović MM, Dimitrijević SP, Vasilić R, Radojević VJ, Vasiljević-Radović DG, Nikolić ND. Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles. in Metals. 2023;13(12):1979.
doi:10.3390/met13121979 .

Mladenović, Ivana O., Vuksanović, Marija M., Dimitrijević, Stevan P., Vasilić, Rastko, Radojević, Vesna J., Vasiljević-Radović, Dana G., Nikolić, Nebojša D., "Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles" in Metals, 13, no. 12 (2023):1979,
https://doi.org/10.3390/met13121979 . .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Filipović, Suzana
AU  - Sknepnek, Aleksandra
AU  - Vlahović, Branislav
AU  - Đorđević, Nenad
AU  - Kovacević, Danijela
AU  - Mirković, Miljana
AU  - Petronijević, Ivan
AU  - Zivković, Predrag
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11872
AB  - In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4 , and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films’ structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.
T2  - Polymers
T1  - Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite
VL  - 15
IS  - 20
SP  - 4080
DO  - 10.3390/polym15204080
ER  - 

@article{
author = "Janićijević, Aleksandra and Filipović, Suzana and Sknepnek, Aleksandra and Vlahović, Branislav and Đorđević, Nenad and Kovacević, Danijela and Mirković, Miljana and Petronijević, Ivan and Zivković, Predrag and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2023",
abstract = "In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4 , and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films’ structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.",
journal = "Polymers",
title = "Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite",
volume = "15",
number = "20",
pages = "4080",
doi = "10.3390/polym15204080"
}

Janićijević, A., Filipović, S., Sknepnek, A., Vlahović, B., Đorđević, N., Kovacević, D., Mirković, M., Petronijević, I., Zivković, P., Rogan, J.,& Pavlović, V. B.. (2023). Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. in Polymers, 15(20), 4080.
https://doi.org/10.3390/polym15204080

Janićijević A, Filipović S, Sknepnek A, Vlahović B, Đorđević N, Kovacević D, Mirković M, Petronijević I, Zivković P, Rogan J, Pavlović VB. Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. in Polymers. 2023;15(20):4080.
doi:10.3390/polym15204080 .

Janićijević, Aleksandra, Filipović, Suzana, Sknepnek, Aleksandra, Vlahović, Branislav, Đorđević, Nenad, Kovacević, Danijela, Mirković, Miljana, Petronijević, Ivan, Zivković, Predrag, Rogan, Jelena, Pavlović, Vladimir B., "Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite" in Polymers, 15, no. 20 (2023):4080,
https://doi.org/10.3390/polym15204080 . .

TY  - JOUR
AU  - Maletić, Marina
AU  - Kalijadis, Ana
AU  - Lazović, Vladimir
AU  - Trifunović, Snežana
AU  - Babić, Biljana M.
AU  - Dapčević, Aleksandra
AU  - Kovač, Janez
AU  - Vukčević, Marija
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10693
AB  - N-doped TiO2/carbon composites (TiO2/CN) with different nitrogen content, were obtained starting from titanium isopropoxide and glucose, and by varying the amount of melamine, added to starting reaction mixture. For comparison, an undoped sample (TiO2/C) was also prepared. Structural and surface characteristics were determined through scanning electron microscopy, thermogravimetric analysis, elemental analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and nitrogen adsorption–desorption isotherms. The photocatalytic activity of TiO2/CN composites was examined via photocatalytic degradation of methylene blue and multiclass pharmaceuticals from water solution. It was found that N doping of TiO2/carbon composites induced changes in structural and surface characteristics of TiO2/CN composites, improving their adsorption, but decreasing photocatalytic efficiency. Nevertheless, TiO2/CN0.05 composite obtained by the hydrothermal synthesis in the presence of glucose and 0.05 g melamine showed the highest efficiency for removing selected pharmaceuticals and methylene blue from aqueous solutions through the combined processes of adsorption in the dark, and photocatalytic degradation under UV and visible irradiation.
T2  - Journal of the Serbian Chemical Society
T1  - Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites
VL  - 88
IS  - 2
SP  - 183
EP  - 197
DO  - 10.2298/JSC220608079M
ER  - 

@article{
author = "Maletić, Marina and Kalijadis, Ana and Lazović, Vladimir and Trifunović, Snežana and Babić, Biljana M. and Dapčević, Aleksandra and Kovač, Janez and Vukčević, Marija",
year = "2023",
abstract = "N-doped TiO2/carbon composites (TiO2/CN) with different nitrogen content, were obtained starting from titanium isopropoxide and glucose, and by varying the amount of melamine, added to starting reaction mixture. For comparison, an undoped sample (TiO2/C) was also prepared. Structural and surface characteristics were determined through scanning electron microscopy, thermogravimetric analysis, elemental analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and nitrogen adsorption–desorption isotherms. The photocatalytic activity of TiO2/CN composites was examined via photocatalytic degradation of methylene blue and multiclass pharmaceuticals from water solution. It was found that N doping of TiO2/carbon composites induced changes in structural and surface characteristics of TiO2/CN composites, improving their adsorption, but decreasing photocatalytic efficiency. Nevertheless, TiO2/CN0.05 composite obtained by the hydrothermal synthesis in the presence of glucose and 0.05 g melamine showed the highest efficiency for removing selected pharmaceuticals and methylene blue from aqueous solutions through the combined processes of adsorption in the dark, and photocatalytic degradation under UV and visible irradiation.",
journal = "Journal of the Serbian Chemical Society",
title = "Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites",
volume = "88",
number = "2",
pages = "183-197",
doi = "10.2298/JSC220608079M"
}

Maletić, M., Kalijadis, A., Lazović, V., Trifunović, S., Babić, B. M., Dapčević, A., Kovač, J.,& Vukčević, M.. (2023). Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites. in Journal of the Serbian Chemical Society, 88(2), 183-197.
https://doi.org/10.2298/JSC220608079M

Maletić M, Kalijadis A, Lazović V, Trifunović S, Babić BM, Dapčević A, Kovač J, Vukčević M. Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites. in Journal of the Serbian Chemical Society. 2023;88(2):183-197.
doi:10.2298/JSC220608079M .

Maletić, Marina, Kalijadis, Ana, Lazović, Vladimir, Trifunović, Snežana, Babić, Biljana M., Dapčević, Aleksandra, Kovač, Janez, Vukčević, Marija, "Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites" in Journal of the Serbian Chemical Society, 88, no. 2 (2023):183-197,
https://doi.org/10.2298/JSC220608079M . .

TY  - JOUR
AU  - Lučić, Milica
AU  - Potkonjak, Nebojša
AU  - Sredović Ignjatović, Ivana
AU  - Lević, Steva
AU  - Dajić-Stevanović, Zora
AU  - Kolašinac, Stefan
AU  - Belović, Miona
AU  - Torbica, Aleksandra
AU  - Zlatanović, Ivan
AU  - Pavlović, Vladimir
AU  - Onjia, Antonije
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11363
AB  - This study investigates the effects of ultrasound, in combination with chemical pretreatments, on the quality attributes (total phenolic and carotenoid content, antioxidant activity (2,2-Diphenyl-1-picrylhydrazyl assay (DPPH)), ferric-reducing ability (FRAP), CIE L* a* b* color, non-enzymatic browning, rehydration ratio, textural and morphological properties) of red pepper subjected to drying (hot air drying or freeze drying). The fractional factorial design was used to assess the impact of factors. The global Derringer desirability function was used to determine the optimal conditions for the best quality attributes of dried pepper. The drying method influenced total phenolic content, a* (redness), and initial rehydration ratio; pretreatment time significantly affected FRAP antiradical activity, a*, chroma and non-browning index, while pH-value had a significant effect on the texture of dried pepper. Non-enzymatic browning was reduced to 72.6%, while the DPPH antioxidant capacity of freeze-dried peppers was enhanced from 4.2% to 71.9%. Ultrasonic pretreatment led to changes in the pepper morphology, while potassium metabisulfite (KMS) was a more effective additive than citric acid.
T2  - Foods
T1  - Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum)
VL  - 12
IS  - 13
SP  - 2468
DO  - 10.3390/foods12132468
ER  - 

@article{
author = "Lučić, Milica and Potkonjak, Nebojša and Sredović Ignjatović, Ivana and Lević, Steva and Dajić-Stevanović, Zora and Kolašinac, Stefan and Belović, Miona and Torbica, Aleksandra and Zlatanović, Ivan and Pavlović, Vladimir and Onjia, Antonije",
year = "2023",
abstract = "This study investigates the effects of ultrasound, in combination with chemical pretreatments, on the quality attributes (total phenolic and carotenoid content, antioxidant activity (2,2-Diphenyl-1-picrylhydrazyl assay (DPPH)), ferric-reducing ability (FRAP), CIE L* a* b* color, non-enzymatic browning, rehydration ratio, textural and morphological properties) of red pepper subjected to drying (hot air drying or freeze drying). The fractional factorial design was used to assess the impact of factors. The global Derringer desirability function was used to determine the optimal conditions for the best quality attributes of dried pepper. The drying method influenced total phenolic content, a* (redness), and initial rehydration ratio; pretreatment time significantly affected FRAP antiradical activity, a*, chroma and non-browning index, while pH-value had a significant effect on the texture of dried pepper. Non-enzymatic browning was reduced to 72.6%, while the DPPH antioxidant capacity of freeze-dried peppers was enhanced from 4.2% to 71.9%. Ultrasonic pretreatment led to changes in the pepper morphology, while potassium metabisulfite (KMS) was a more effective additive than citric acid.",
journal = "Foods",
title = "Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum)",
volume = "12",
number = "13",
pages = "2468",
doi = "10.3390/foods12132468"
}

Lučić, M., Potkonjak, N., Sredović Ignjatović, I., Lević, S., Dajić-Stevanović, Z., Kolašinac, S., Belović, M., Torbica, A., Zlatanović, I., Pavlović, V.,& Onjia, A.. (2023). Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum). in Foods, 12(13), 2468.
https://doi.org/10.3390/foods12132468

Lučić M, Potkonjak N, Sredović Ignjatović I, Lević S, Dajić-Stevanović Z, Kolašinac S, Belović M, Torbica A, Zlatanović I, Pavlović V, Onjia A. Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum). in Foods. 2023;12(13):2468.
doi:10.3390/foods12132468 .

Lučić, Milica, Potkonjak, Nebojša, Sredović Ignjatović, Ivana, Lević, Steva, Dajić-Stevanović, Zora, Kolašinac, Stefan, Belović, Miona, Torbica, Aleksandra, Zlatanović, Ivan, Pavlović, Vladimir, Onjia, Antonije, "Influence of Ultrasonic and Chemical Pretreatments on Quality Attributes of Dried Pepper (Capsicum annuum)" in Foods, 12, no. 13 (2023):2468,
https://doi.org/10.3390/foods12132468 . .

TY  - JOUR
AU  - Veljković, Filip M.
AU  - Dimitrijević, Stevan P.
AU  - Dimitrijević, Silvana B.
AU  - Vurdelja, Borislava D.
AU  - Matović, Branko
AU  - Stoiljković, Milovan
AU  - Kamberović, Željko
AU  - Veličković, Suzana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10589
AB  - This work presents the perspective of applying the laser desorption/ionization mass spectrometry (LDI MS) for characterization the anode film of the Ag60Cu26Zn14, Ag58.5Cu31.5Pd10, and Ag63Cu27In10 alloys (at high concentrations of chloride ions in solutions). The reference LDI mass spectra of anode films of pure Ag and Cu have been used for the identification of product corrosion. Knowing the clusters detected in the reference spectra lead to the facilitating identification of the LDI mass spectrum of the sample and reduces the analysis time. The LDI MS analysis of these alloys revealed that the predominant corrosion product are AgCl (from AgnCln+1−/+, n = 1–3), and CuCl (from “superhalogen” CumCln− clusters, m = 1–2, n = 2–6); it also revealed Cu2(OH)3Cl (from Cu2(OH)(H2O)2+) and Cu2O (from Cu(H2O)+, Cu2O doped with chlorine). These results are in accordance with the X-ray diffraction and Raman analysis. The LDI MS spectra of alloys contain the additional peaks formed due to the mutual influences of different metals in the alloys (AgCuCl3− (AgCl-CuCl2−), AgCu2Cl4− (AgCl-CuCl-CuCl2−), and Ag2CuCl4− (AgCl-AgCl-CuCl−), which is consistent with the identified corrosion products. It should be noted that the LDI MS suggest the presence of CuCl2, which can be interpreted as the corrosion products retained in the porous films of alloys, and not detected by the other methods due to a small amount. The future theoretical and experimental studies of metal clusters, significant for metallurgy, can contribute that the LDI MS is becoming a powerful analytical tool for characterization the metal surfaces.
T2  - Arabian Journal of Chemistry
T1  - Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system
VL  - 16
IS  - 2
SP  - 104461
DO  - 10.1016/j.arabjc.2022.104461
ER  - 

@article{
author = "Veljković, Filip M. and Dimitrijević, Stevan P. and Dimitrijević, Silvana B. and Vurdelja, Borislava D. and Matović, Branko and Stoiljković, Milovan and Kamberović, Željko and Veličković, Suzana",
year = "2023",
abstract = "This work presents the perspective of applying the laser desorption/ionization mass spectrometry (LDI MS) for characterization the anode film of the Ag60Cu26Zn14, Ag58.5Cu31.5Pd10, and Ag63Cu27In10 alloys (at high concentrations of chloride ions in solutions). The reference LDI mass spectra of anode films of pure Ag and Cu have been used for the identification of product corrosion. Knowing the clusters detected in the reference spectra lead to the facilitating identification of the LDI mass spectrum of the sample and reduces the analysis time. The LDI MS analysis of these alloys revealed that the predominant corrosion product are AgCl (from AgnCln+1−/+, n = 1–3), and CuCl (from “superhalogen” CumCln− clusters, m = 1–2, n = 2–6); it also revealed Cu2(OH)3Cl (from Cu2(OH)(H2O)2+) and Cu2O (from Cu(H2O)+, Cu2O doped with chlorine). These results are in accordance with the X-ray diffraction and Raman analysis. The LDI MS spectra of alloys contain the additional peaks formed due to the mutual influences of different metals in the alloys (AgCuCl3− (AgCl-CuCl2−), AgCu2Cl4− (AgCl-CuCl-CuCl2−), and Ag2CuCl4− (AgCl-AgCl-CuCl−), which is consistent with the identified corrosion products. It should be noted that the LDI MS suggest the presence of CuCl2, which can be interpreted as the corrosion products retained in the porous films of alloys, and not detected by the other methods due to a small amount. The future theoretical and experimental studies of metal clusters, significant for metallurgy, can contribute that the LDI MS is becoming a powerful analytical tool for characterization the metal surfaces.",
journal = "Arabian Journal of Chemistry",
title = "Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system",
volume = "16",
number = "2",
pages = "104461",
doi = "10.1016/j.arabjc.2022.104461"
}

Veljković, F. M., Dimitrijević, S. P., Dimitrijević, S. B., Vurdelja, B. D., Matović, B., Stoiljković, M., Kamberović, Ž.,& Veličković, S.. (2023). Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system. in Arabian Journal of Chemistry, 16(2), 104461.
https://doi.org/10.1016/j.arabjc.2022.104461

Veljković FM, Dimitrijević SP, Dimitrijević SB, Vurdelja BD, Matović B, Stoiljković M, Kamberović Ž, Veličković S. Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system. in Arabian Journal of Chemistry. 2023;16(2):104461.
doi:10.1016/j.arabjc.2022.104461 .

Veljković, Filip M., Dimitrijević, Stevan P., Dimitrijević, Silvana B., Vurdelja, Borislava D., Matović, Branko, Stoiljković, Milovan, Kamberović, Željko, Veličković, Suzana, "Prospective of the LDI MS to characterization the corrosion products of silver-copper alloys on an example of the Ag-Cu-X (X- Zn, Pd, In) system" in Arabian Journal of Chemistry, 16, no. 2 (2023):104461,
https://doi.org/10.1016/j.arabjc.2022.104461 . .

TY  - JOUR
AU  - Jaćimovski, Darko
AU  - Šućurović, Katarina
AU  - Đuriš, Mihal
AU  - Arsenijević, Zorana
AU  - Krstić, Sanja
AU  - Bošković-Vragolović, Nevenka
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11168
AB  - In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds.
AB  - У овом раду је одређиван коефицијент преноса масе флуид–зид у инверзно-флуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони
пречника 45 mm са сферичним и несферичним честицама полипропилена и полиетилена пречника 3,3–4,9 mm и густине око 930 kg m-3. Као флуидизациони медијум
коришћен је разблажени раствор метиленског плавог који је адсорбован на делу површине колоне на силикагелу. Добијени резултати показали су да присуство честица при
инверзној флуидизацији не доприноси значајно преносу масе у поређењу са утицајем
честица на пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен концепт псеудофлуида и изведена је емпиријска корелација за одређивање
коефицијента преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за инверзну и конвенционалну флуидизације.
T2  - Journal of the Serbian Chemical Society
T1  - Mass transfer in inverse fluidized beds
T1  - Пренос масе у инверзно-флуидизованом слоју
VL  - 88
IS  - 9
SP  - 905
EP  - 919
DO  - 10.2298/JSC230116016J
ER  - 

@article{
author = "Jaćimovski, Darko and Šućurović, Katarina and Đuriš, Mihal and Arsenijević, Zorana and Krstić, Sanja and Bošković-Vragolović, Nevenka",
year = "2023",
abstract = "In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds., У овом раду је одређиван коефицијент преноса масе флуид–зид у инверзно-флуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони
пречника 45 mm са сферичним и несферичним честицама полипропилена и полиетилена пречника 3,3–4,9 mm и густине око 930 kg m-3. Као флуидизациони медијум
коришћен је разблажени раствор метиленског плавог који је адсорбован на делу површине колоне на силикагелу. Добијени резултати показали су да присуство честица при
инверзној флуидизацији не доприноси значајно преносу масе у поређењу са утицајем
честица на пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен концепт псеудофлуида и изведена је емпиријска корелација за одређивање
коефицијента преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за инверзну и конвенционалну флуидизације.",
journal = "Journal of the Serbian Chemical Society",
title = "Mass transfer in inverse fluidized beds, Пренос масе у инверзно-флуидизованом слоју",
volume = "88",
number = "9",
pages = "905-919",
doi = "10.2298/JSC230116016J"
}

Jaćimovski, D., Šućurović, K., Đuriš, M., Arsenijević, Z., Krstić, S.,& Bošković-Vragolović, N.. (2023). Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society, 88(9), 905-919.
https://doi.org/10.2298/JSC230116016J

Jaćimovski D, Šućurović K, Đuriš M, Arsenijević Z, Krstić S, Bošković-Vragolović N. Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society. 2023;88(9):905-919.
doi:10.2298/JSC230116016J .

Jaćimovski, Darko, Šućurović, Katarina, Đuriš, Mihal, Arsenijević, Zorana, Krstić, Sanja, Bošković-Vragolović, Nevenka, "Mass transfer in inverse fluidized beds" in Journal of the Serbian Chemical Society, 88, no. 9 (2023):905-919,
https://doi.org/10.2298/JSC230116016J . .

TY  - JOUR
AU  - Ćujić, Mirjana
AU  - Ćirović, Željko
AU  - Đolić, Maja
AU  - Janković-Mandić, Ljiljana
AU  - Radenković, Mirjana
AU  - Onjia, Antonije
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11228
AB  - The health effects attributed to exposure to ambient PM2.5 concentrationsabove 10 μg/m3by using the AirQ+ modeling software were assessed. Thehourly concentrations of PM2.5 were collected from 13 air pollutionmonitoring stations in the Belgrade district during Jun and July 2021.,which were further used as input data for the AirQ+software. The averageconcentration of PM2.5 for two-month monitoring from all sampling sites inthe city was 14.8 μg/m3, the maximum daily concentration was 55.7 μg/m3,while the maximum concentration per hour was 365 μg/m3. The spatialdistribution of concentrations was mapped using geostatistical interpolation,revealing hotspots within the city centre and industrial area of the district.The burden of disease, such as stroke, ischemic heart disease (IHD), chronicobstructive pulmonary disease (COPD) and lung cancer (LC), due to theambient PM2.5 pollution was evaluated according to the WHO methodologyfor health risk assessment of air pollution. The model used for thisassessment is based on the attributable proportion defined as the section ofthe health effect related to exposure to air pollution in an at-risk population.The estimated attributable proportion was 19.4% for stroke, 27.2% for IHD,15.3% for COPD and 9.0% for LC. The estimated number of attributablecases per 100,000 population at risk, due to PM2.5 air pollution, for stroke,IHD, COPD, and LC, was 28, 34, 15, and 8, respectively.
T2  - Thermal Science
T1  - Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district
VL  - 27
IS  - 3 Part B
SP  - 2265
EP  - 2273
DO  - 10.2298/TSCI220131104C
ER  - 

@article{
author = "Ćujić, Mirjana and Ćirović, Željko and Đolić, Maja and Janković-Mandić, Ljiljana and Radenković, Mirjana and Onjia, Antonije",
year = "2023",
abstract = "The health effects attributed to exposure to ambient PM2.5 concentrationsabove 10 μg/m3by using the AirQ+ modeling software were assessed. Thehourly concentrations of PM2.5 were collected from 13 air pollutionmonitoring stations in the Belgrade district during Jun and July 2021.,which were further used as input data for the AirQ+software. The averageconcentration of PM2.5 for two-month monitoring from all sampling sites inthe city was 14.8 μg/m3, the maximum daily concentration was 55.7 μg/m3,while the maximum concentration per hour was 365 μg/m3. The spatialdistribution of concentrations was mapped using geostatistical interpolation,revealing hotspots within the city centre and industrial area of the district.The burden of disease, such as stroke, ischemic heart disease (IHD), chronicobstructive pulmonary disease (COPD) and lung cancer (LC), due to theambient PM2.5 pollution was evaluated according to the WHO methodologyfor health risk assessment of air pollution. The model used for thisassessment is based on the attributable proportion defined as the section ofthe health effect related to exposure to air pollution in an at-risk population.The estimated attributable proportion was 19.4% for stroke, 27.2% for IHD,15.3% for COPD and 9.0% for LC. The estimated number of attributablecases per 100,000 population at risk, due to PM2.5 air pollution, for stroke,IHD, COPD, and LC, was 28, 34, 15, and 8, respectively.",
journal = "Thermal Science",
title = "Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district",
volume = "27",
number = "3 Part B",
pages = "2265-2273",
doi = "10.2298/TSCI220131104C"
}

Ćujić, M., Ćirović, Ž., Đolić, M., Janković-Mandić, L., Radenković, M.,& Onjia, A.. (2023). Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district. in Thermal Science, 27(3 Part B), 2265-2273.
https://doi.org/10.2298/TSCI220131104C

Ćujić M, Ćirović Ž, Đolić M, Janković-Mandić L, Radenković M, Onjia A. Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district. in Thermal Science. 2023;27(3 Part B):2265-2273.
doi:10.2298/TSCI220131104C .

Ćujić, Mirjana, Ćirović, Željko, Đolić, Maja, Janković-Mandić, Ljiljana, Radenković, Mirjana, Onjia, Antonije, "Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district" in Thermal Science, 27, no. 3 Part B (2023):2265-2273,
https://doi.org/10.2298/TSCI220131104C . .

TY  - JOUR
AU  - Lučić, Milica
AU  - Momčilović, Milan Z.
AU  - Marković, Jelena
AU  - Jović, Mihajlo D.
AU  - Smičiklas, Ivana D.
AU  - Onjia, Antonije E.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10695
AB  - The human health risks of cadmium (Cd), lead (Pb), and nickel (Ni) in fifty regular and slim cigarette brands available in the Serbian market were evaluated. Distributions on per-cigarette basis concentrations of these metals, as determined by graphite furnace atomic absorption spectrometry, were used as inputs in the probabilistic risk assessment. The contents of these metals in cigarettes varied significantly. Larger quantities of the studied metals were observed in regular cigarettes than in slim cigarettes, but the concentration levels per cigarette tobacco mass were higher in slim cigarettes. The metal concentrations in counterfeit cigarettes were marginally higher than those in authentic brands. Based on the mean concentrations, Pb was the most abundant toxic metal, followed by Ni and Cd. The calculated values of the cumulative hazard index (HI) and incremental lifetime cancer risk (ILCR) indicated a low noncarcinogenic risk and low but not negligible carcinogenic risk from Cd, Pb, and Ni. The mean HI and ILCR values obtained using probabilistic and deterministic approaches were similar. A Monte Carlo simulation was employed to minimize the uncertainty of health risk estimation. The sensitivity analysis revealed that the most influential factor was cigarette mass followed by Cd content.
T2  - Toxicological and Environmental Chemistry
T1  - Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes
VL  - 105
IS  - 1-7
SP  - 92
EP  - 110
DO  - 10.1080/02772248.2023.2177291
ER  - 

@article{
author = "Lučić, Milica and Momčilović, Milan Z. and Marković, Jelena and Jović, Mihajlo D. and Smičiklas, Ivana D. and Onjia, Antonije E.",
year = "2023",
abstract = "The human health risks of cadmium (Cd), lead (Pb), and nickel (Ni) in fifty regular and slim cigarette brands available in the Serbian market were evaluated. Distributions on per-cigarette basis concentrations of these metals, as determined by graphite furnace atomic absorption spectrometry, were used as inputs in the probabilistic risk assessment. The contents of these metals in cigarettes varied significantly. Larger quantities of the studied metals were observed in regular cigarettes than in slim cigarettes, but the concentration levels per cigarette tobacco mass were higher in slim cigarettes. The metal concentrations in counterfeit cigarettes were marginally higher than those in authentic brands. Based on the mean concentrations, Pb was the most abundant toxic metal, followed by Ni and Cd. The calculated values of the cumulative hazard index (HI) and incremental lifetime cancer risk (ILCR) indicated a low noncarcinogenic risk and low but not negligible carcinogenic risk from Cd, Pb, and Ni. The mean HI and ILCR values obtained using probabilistic and deterministic approaches were similar. A Monte Carlo simulation was employed to minimize the uncertainty of health risk estimation. The sensitivity analysis revealed that the most influential factor was cigarette mass followed by Cd content.",
journal = "Toxicological and Environmental Chemistry",
title = "Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes",
volume = "105",
number = "1-7",
pages = "92-110",
doi = "10.1080/02772248.2023.2177291"
}

Lučić, M., Momčilović, M. Z., Marković, J., Jović, M. D., Smičiklas, I. D.,& Onjia, A. E.. (2023). Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes. in Toxicological and Environmental Chemistry, 105(1-7), 92-110.
https://doi.org/10.1080/02772248.2023.2177291

Lučić M, Momčilović MZ, Marković J, Jović MD, Smičiklas ID, Onjia AE. Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes. in Toxicological and Environmental Chemistry. 2023;105(1-7):92-110.
doi:10.1080/02772248.2023.2177291 .

Lučić, Milica, Momčilović, Milan Z., Marković, Jelena, Jović, Mihajlo D., Smičiklas, Ivana D., Onjia, Antonije E., "Monte Carlo simulation of health risk from cadmium, lead, and nickel in cigarettes" in Toxicological and Environmental Chemistry, 105, no. 1-7 (2023):92-110,
https://doi.org/10.1080/02772248.2023.2177291 . .

TY  - JOUR
AU  - Dragović, Snežana D.
AU  - Smičiklas, Ivana D.
AU  - Jović, Mihajlo D.
AU  - Čupić, Aleksandar
AU  - Dragović, Ranko M.
AU  - Gajić, Boško
AU  - Onjia, Antonije E.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11024
AB  - Despite presenting a practical approach for the characterization of the environmental risk of potentially toxic elements (PTEs) derived from steel production facilities, the analysis of the spatial distribution of bioavailable PTEs concentrations in the soil is frequently overlooked in the management of polluted sites. In this study, the diethylenetriaminepentaacetic acid (DTPA)-extractable forms of PTEs were investigated in soils surrounding the largest Serbian steel production plant. The correlation and geostatistical analysis indicated their pronounced variability suggesting the anthropogenic origin of most investigated elements, apparently from the steel production facility. The detailed visualization of variables and observations derived by self-organizing maps (SOMs) revealed the homologies in PTEs’ distribution patterns, implying the common origin of some elements. These observations were confirmed by principal component analysis (PCA) and positive matrix factorization (PMF). The аpplied approach supports a comprehensive assessment of contaminated sites' ecological and health risks and provides a basis for soil remediation.
T2  - Heliyon
T1  - Spatial distribution and source apportionment of DTPA-extractable metals in soils surrounding the largest Serbian steel production plant
VL  - 9
IS  - 5
SP  - e16307
DO  - 10.1016/j.heliyon.2023.e16307
ER  - 

@article{
author = "Dragović, Snežana D. and Smičiklas, Ivana D. and Jović, Mihajlo D. and Čupić, Aleksandar and Dragović, Ranko M. and Gajić, Boško and Onjia, Antonije E.",
year = "2023",
abstract = "Despite presenting a practical approach for the characterization of the environmental risk of potentially toxic elements (PTEs) derived from steel production facilities, the analysis of the spatial distribution of bioavailable PTEs concentrations in the soil is frequently overlooked in the management of polluted sites. In this study, the diethylenetriaminepentaacetic acid (DTPA)-extractable forms of PTEs were investigated in soils surrounding the largest Serbian steel production plant. The correlation and geostatistical analysis indicated their pronounced variability suggesting the anthropogenic origin of most investigated elements, apparently from the steel production facility. The detailed visualization of variables and observations derived by self-organizing maps (SOMs) revealed the homologies in PTEs’ distribution patterns, implying the common origin of some elements. These observations were confirmed by principal component analysis (PCA) and positive matrix factorization (PMF). The аpplied approach supports a comprehensive assessment of contaminated sites' ecological and health risks and provides a basis for soil remediation.",
journal = "Heliyon",
title = "Spatial distribution and source apportionment of DTPA-extractable metals in soils surrounding the largest Serbian steel production plant",
volume = "9",
number = "5",
pages = "e16307",
doi = "10.1016/j.heliyon.2023.e16307"
}

Dragović, S. D., Smičiklas, I. D., Jović, M. D., Čupić, A., Dragović, R. M., Gajić, B.,& Onjia, A. E.. (2023). Spatial distribution and source apportionment of DTPA-extractable metals in soils surrounding the largest Serbian steel production plant. in Heliyon, 9(5), e16307.
https://doi.org/10.1016/j.heliyon.2023.e16307

Dragović SD, Smičiklas ID, Jović MD, Čupić A, Dragović RM, Gajić B, Onjia AE. Spatial distribution and source apportionment of DTPA-extractable metals in soils surrounding the largest Serbian steel production plant. in Heliyon. 2023;9(5):e16307.
doi:10.1016/j.heliyon.2023.e16307 .

Dragović, Snežana D., Smičiklas, Ivana D., Jović, Mihajlo D., Čupić, Aleksandar, Dragović, Ranko M., Gajić, Boško, Onjia, Antonije E., "Spatial distribution and source apportionment of DTPA-extractable metals in soils surrounding the largest Serbian steel production plant" in Heliyon, 9, no. 5 (2023):e16307,
https://doi.org/10.1016/j.heliyon.2023.e16307 . .

TY  - JOUR
AU  - Nešić, Aleksandra
AU  - Kokunešoski, Maja
AU  - Meseldžija, Slađana
AU  - Volkov-Husović, Tatjana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12664
AB  - The textile industry is one of the largest water-consuming industries in the world. The wastewater generated by the textile industry is a major source of pollution, containing mostly dyes, but also detergents, and heavy metals. Since dyes can have a negative impact on the environment, human and aquatic life, it is really important to find proper solutions for removal of these pollutants from wastewater. In addition, special attention is given to the discovery of new and fast "in situ" methods for identification and quantification of pollutants from wastewater. In this paper, SBA-15, mesoporous silica material, was used as sorbent for removal of Basic Yellow 28 from aqueous solutions. In addition, colored SBA-15 after sorption process was subjected to image analysis, to evaluate if it was possible to quantify sorbed dye on sorbent based on intensity of SBA-15 coloration. The obtained results revealed that SBA-15 could remove 99% of dye within 5 min. The highest efficiency of dye removal was at pH8, using 200 mg of sorbent. According to the Langmuir isotherm model, the theoretical maximum sorption capacity was 909 mg/g. Image-Pro software confirmed that it would be possible to quantify sorbed dye onto SBA-15 with accuracy of 0.98. Overall, SBA-15 demonstrated to be efficient sorbent in removal of Basic Yellow 28 from water, but also to be potential carrier as a sensor for detection of colored pollutants in water.
AB  - Tekstilna industrija je jedna od najvećih potrošača vode u odnosu na druge industrijske grane. Otpadne vode iz tekstilne industrije su jedan od glavnih izvora zagađenja i uglavnom sadrže boje, ali takođe i deterdžente i teške metale. Pošto boje mogu imati negativan uticaj na životnu sredinu, ljude i vodeni svet, važno je pronaći odgovarajuća rešenja za uklanjanje ovih zagađivača iz otpadnih voda. Pored toga, posebna pažnja je posvećena otkrivanju novih i brzih „in situ” metoda za identifikaciju i kvantifikaciju zagađivača iz otpadnih voda. U ovom radu kao sorbent za uklanjanje Basic Yellow 28 boje iz vodenih rastvora korišćen je SBA-15, mezoporozni silika materijal. Pored toga, obojeni SBA-15 nakon procesa sorpcije podvrgnuti su analizi slike, kako bi se procenilo da li je moguće kvantifikovati sorbovanu boju na sorbentu na osnovu intenziteta obojenosti SBA-15. Dobijeni rezultati su pokazali da SBA-15 može ukloniti 99% boje u roku od 5 minuta. Najveća efikasnost uklanjanja boje bila je pri pH 8, korišćenjem 200 mg sorbenta. Prema Langmuirovom modelu, teoretski maksimalni kapacitet sorpcije bio je 909 mg/g. Softver Image-Pro je potvrdio da je moguće kvantifikovati boju na SBA-15 sa tačnošću od 0,98. SBA-15 se pokazao kao efikasan sorbent u uklanjanju Basic Yellow 28 boje iz vode, ali i kao potencijalni senzor za detekciju obojenih zagađivača u vodi.
T2  - Advanced Technologies
T1  - Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions
T1  - Senzor na bazi mezoporozne silike za kolorimetrijsko određivanje boje Basic Yellow 28 u vodenim rastvorima
VL  - 12
IS  - 2
SP  - 37
EP  - 42
DO  - 10.5937/savteh2302036N
ER  - 

@article{
author = "Nešić, Aleksandra and Kokunešoski, Maja and Meseldžija, Slađana and Volkov-Husović, Tatjana",
year = "2023",
abstract = "The textile industry is one of the largest water-consuming industries in the world. The wastewater generated by the textile industry is a major source of pollution, containing mostly dyes, but also detergents, and heavy metals. Since dyes can have a negative impact on the environment, human and aquatic life, it is really important to find proper solutions for removal of these pollutants from wastewater. In addition, special attention is given to the discovery of new and fast "in situ" methods for identification and quantification of pollutants from wastewater. In this paper, SBA-15, mesoporous silica material, was used as sorbent for removal of Basic Yellow 28 from aqueous solutions. In addition, colored SBA-15 after sorption process was subjected to image analysis, to evaluate if it was possible to quantify sorbed dye on sorbent based on intensity of SBA-15 coloration. The obtained results revealed that SBA-15 could remove 99% of dye within 5 min. The highest efficiency of dye removal was at pH8, using 200 mg of sorbent. According to the Langmuir isotherm model, the theoretical maximum sorption capacity was 909 mg/g. Image-Pro software confirmed that it would be possible to quantify sorbed dye onto SBA-15 with accuracy of 0.98. Overall, SBA-15 demonstrated to be efficient sorbent in removal of Basic Yellow 28 from water, but also to be potential carrier as a sensor for detection of colored pollutants in water., Tekstilna industrija je jedna od najvećih potrošača vode u odnosu na druge industrijske grane. Otpadne vode iz tekstilne industrije su jedan od glavnih izvora zagađenja i uglavnom sadrže boje, ali takođe i deterdžente i teške metale. Pošto boje mogu imati negativan uticaj na životnu sredinu, ljude i vodeni svet, važno je pronaći odgovarajuća rešenja za uklanjanje ovih zagađivača iz otpadnih voda. Pored toga, posebna pažnja je posvećena otkrivanju novih i brzih „in situ” metoda za identifikaciju i kvantifikaciju zagađivača iz otpadnih voda. U ovom radu kao sorbent za uklanjanje Basic Yellow 28 boje iz vodenih rastvora korišćen je SBA-15, mezoporozni silika materijal. Pored toga, obojeni SBA-15 nakon procesa sorpcije podvrgnuti su analizi slike, kako bi se procenilo da li je moguće kvantifikovati sorbovanu boju na sorbentu na osnovu intenziteta obojenosti SBA-15. Dobijeni rezultati su pokazali da SBA-15 može ukloniti 99% boje u roku od 5 minuta. Najveća efikasnost uklanjanja boje bila je pri pH 8, korišćenjem 200 mg sorbenta. Prema Langmuirovom modelu, teoretski maksimalni kapacitet sorpcije bio je 909 mg/g. Softver Image-Pro je potvrdio da je moguće kvantifikovati boju na SBA-15 sa tačnošću od 0,98. SBA-15 se pokazao kao efikasan sorbent u uklanjanju Basic Yellow 28 boje iz vode, ali i kao potencijalni senzor za detekciju obojenih zagađivača u vodi.",
journal = "Advanced Technologies",
title = "Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions, Senzor na bazi mezoporozne silike za kolorimetrijsko određivanje boje Basic Yellow 28 u vodenim rastvorima",
volume = "12",
number = "2",
pages = "37-42",
doi = "10.5937/savteh2302036N"
}

Nešić, A., Kokunešoski, M., Meseldžija, S.,& Volkov-Husović, T.. (2023). Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions. in Advanced Technologies, 12(2), 37-42.
https://doi.org/10.5937/savteh2302036N

Nešić A, Kokunešoski M, Meseldžija S, Volkov-Husović T. Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions. in Advanced Technologies. 2023;12(2):37-42.
doi:10.5937/savteh2302036N .

Nešić, Aleksandra, Kokunešoski, Maja, Meseldžija, Slađana, Volkov-Husović, Tatjana, "Mesoporous silica-based sensor for colorimetric determination of Basic Yellow 28 dye in aqueous solutions" in Advanced Technologies, 12, no. 2 (2023):37-42,
https://doi.org/10.5937/savteh2302036N . .