TY  - JOUR
AU  - Radenković, Marina
AU  - Petrović, Jelena
AU  - Pap, Sabolc
AU  - Kalijadis, Ana
AU  - Momčilović, Miloš
AU  - Krstulović, Nikša
AU  - Živković, Sanja
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12206
AB  - Toxic elements, lead, and copper are often found in wastewater discharged from industries such as mining. The discharge of untreated effluent poses severe environmental challenges and sorption methods using agricultural waste materials are proposed as an efficient and cost-effective solution. For this research, activated sunflower material (ASM) was prepared from abundantly available agricultural sunflower waste residues and utilised to remove Pb2+ and Cu2+ ions from an aqueous medium. To begin, we examine variables that may have an impact on the adsorption process, such as pH, contact time, adsorbent dose, and initial concentration using Box-Behnken Design (BBD) to find optimal conditions. Maximum removal efficiency was found at a pH of 5, contact time of 180 min, and initial concentration of 50 mg/L for Pb2+ and 150 mg/L for Cu2+. Additionally, adsorbent dose differed by element, for Cu2+ it was 200 mg, whilst for Pb2+ it was 124 mg. Features of activated carbon such as morphology, elemental composition, textural properties, and surface functionalities were characterised using SEM-EDS, BET, FTIR, and XPS. The adsorption equilibrium data were analysed by Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. It was found that the obtained results for Pb2+ adsorption were better described with the Freundlich isotherm model. Maximum adsorption capacities for Pb2+ and Cu2+ were 91.8 mg/g and 20.5 mg/g, respectively. Furthermore, kinetic studies confirmed that the adsorption process followed a pseudo-first-order kinetic model for Pb2+, but for Cu2+ all applied kinetic models fitted experimental data with the same values of the correlation coefficient (R2 = 0.99). After comprehensive analysis using the methods mentioned above, ASM was tested for the removal of Cu2+ from mining wastewater sample, and the obtained removal efficiency was 98.6% ± 2.0%. The results of desorption experiments conducted, confirm that ASM has good potential to be reused for the purpose of removing Cu2+ from wastewater.
T2  - Chemosphere
T1  - Waste biomass derived highly-porous carbon material for toxic metal removal: Optimisation, mechanisms and environmental implications
VL  - 347
SP  - 140684
DO  - 10.1016/j.chemosphere.2023.140684
ER  - 

@article{
author = "Radenković, Marina and Petrović, Jelena and Pap, Sabolc and Kalijadis, Ana and Momčilović, Miloš and Krstulović, Nikša and Živković, Sanja",
year = "2024",
abstract = "Toxic elements, lead, and copper are often found in wastewater discharged from industries such as mining. The discharge of untreated effluent poses severe environmental challenges and sorption methods using agricultural waste materials are proposed as an efficient and cost-effective solution. For this research, activated sunflower material (ASM) was prepared from abundantly available agricultural sunflower waste residues and utilised to remove Pb2+ and Cu2+ ions from an aqueous medium. To begin, we examine variables that may have an impact on the adsorption process, such as pH, contact time, adsorbent dose, and initial concentration using Box-Behnken Design (BBD) to find optimal conditions. Maximum removal efficiency was found at a pH of 5, contact time of 180 min, and initial concentration of 50 mg/L for Pb2+ and 150 mg/L for Cu2+. Additionally, adsorbent dose differed by element, for Cu2+ it was 200 mg, whilst for Pb2+ it was 124 mg. Features of activated carbon such as morphology, elemental composition, textural properties, and surface functionalities were characterised using SEM-EDS, BET, FTIR, and XPS. The adsorption equilibrium data were analysed by Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models. It was found that the obtained results for Pb2+ adsorption were better described with the Freundlich isotherm model. Maximum adsorption capacities for Pb2+ and Cu2+ were 91.8 mg/g and 20.5 mg/g, respectively. Furthermore, kinetic studies confirmed that the adsorption process followed a pseudo-first-order kinetic model for Pb2+, but for Cu2+ all applied kinetic models fitted experimental data with the same values of the correlation coefficient (R2 = 0.99). After comprehensive analysis using the methods mentioned above, ASM was tested for the removal of Cu2+ from mining wastewater sample, and the obtained removal efficiency was 98.6% ± 2.0%. The results of desorption experiments conducted, confirm that ASM has good potential to be reused for the purpose of removing Cu2+ from wastewater.",
journal = "Chemosphere",
title = "Waste biomass derived highly-porous carbon material for toxic metal removal: Optimisation, mechanisms and environmental implications",
volume = "347",
pages = "140684",
doi = "10.1016/j.chemosphere.2023.140684"
}

Radenković, M., Petrović, J., Pap, S., Kalijadis, A., Momčilović, M., Krstulović, N.,& Živković, S.. (2024). Waste biomass derived highly-porous carbon material for toxic metal removal: Optimisation, mechanisms and environmental implications. in Chemosphere, 347, 140684.
https://doi.org/10.1016/j.chemosphere.2023.140684

Radenković M, Petrović J, Pap S, Kalijadis A, Momčilović M, Krstulović N, Živković S. Waste biomass derived highly-porous carbon material for toxic metal removal: Optimisation, mechanisms and environmental implications. in Chemosphere. 2024;347:140684.
doi:10.1016/j.chemosphere.2023.140684 .

Radenković, Marina, Petrović, Jelena, Pap, Sabolc, Kalijadis, Ana, Momčilović, Miloš, Krstulović, Nikša, Živković, Sanja, "Waste biomass derived highly-porous carbon material for toxic metal removal: Optimisation, mechanisms and environmental implications" in Chemosphere, 347 (2024):140684,
https://doi.org/10.1016/j.chemosphere.2023.140684 . .