TY  - JOUR
AU  - Stojadinović, Bojan
AU  - Dohčević-Mitrović, Zorana 
AU  - Stepanenko, Dimitrije
AU  - Rosić, Milena
AU  - Petronijević, Ivan M.
AU  - Tasić, Nikola B.
AU  - Ilić, Nikola
AU  - Matović, Branko
AU  - Stojanovic, Biljana
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1804
AB  - We have studied Ho-doped BiFeO3 nanopowders (Bi1-xHoxFeO3, x = 0-0.15), prepared via sol-gel method, in order to analyse the effect of substitution-driven structural transition on dielectric and ferroelectric properties of bismuth ferrite. X-ray diffraction and Raman study demonstrated that an increased Ho concentration (x GT = 0.1) has induced gradual phase transition from rhombohedral to orthorhombic phase. The frequency dependent permittivity of Bi1-xHoxFeO3 nanopowders was analysed within a model which incorporates Debye-like dielectric response and dc and ac conductivity contributions based on universal dielectric response. It was shown that influence of leakage current and grain boundary/interface effects on dielectric and ferroelectric properties was substantially reduced in biphasic Bi1-xHoxFeO3 (x GT 0.1) samples. The electrical performance of Bi0.85Ho0.15FeO3 sample, for which orthorhombic phase prevailed, was significantly improved and Bi0.85Ho0.15FeO3 has sustained strong applied electric fields (up to 100 kV/cm) without breakdown. Under strong external fields, the polarization exhibited strong frequency dependence. The low-frequency remnant polarization and coercive field of Bi0.85Ho0.15FeO3 were significantly enhanced. It was proposed that defect dipolar polarization substantially contributed to the intrinsic polarization of Bi0.85Ho0.15FeO3 under strong electric fields at low frequencies.
T2  - Ceramics International
T1  - Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition
VL  - 43
IS  - 18
SP  - 16531
EP  - 16538
DO  - 10.1016/j.ceramint.2017.09.038
ER  - 

@article{
author = "Stojadinović, Bojan and Dohčević-Mitrović, Zorana  and Stepanenko, Dimitrije and Rosić, Milena and Petronijević, Ivan M. and Tasić, Nikola B. and Ilić, Nikola and Matović, Branko and Stojanovic, Biljana",
year = "2017",
abstract = "We have studied Ho-doped BiFeO3 nanopowders (Bi1-xHoxFeO3, x = 0-0.15), prepared via sol-gel method, in order to analyse the effect of substitution-driven structural transition on dielectric and ferroelectric properties of bismuth ferrite. X-ray diffraction and Raman study demonstrated that an increased Ho concentration (x GT = 0.1) has induced gradual phase transition from rhombohedral to orthorhombic phase. The frequency dependent permittivity of Bi1-xHoxFeO3 nanopowders was analysed within a model which incorporates Debye-like dielectric response and dc and ac conductivity contributions based on universal dielectric response. It was shown that influence of leakage current and grain boundary/interface effects on dielectric and ferroelectric properties was substantially reduced in biphasic Bi1-xHoxFeO3 (x GT 0.1) samples. The electrical performance of Bi0.85Ho0.15FeO3 sample, for which orthorhombic phase prevailed, was significantly improved and Bi0.85Ho0.15FeO3 has sustained strong applied electric fields (up to 100 kV/cm) without breakdown. Under strong external fields, the polarization exhibited strong frequency dependence. The low-frequency remnant polarization and coercive field of Bi0.85Ho0.15FeO3 were significantly enhanced. It was proposed that defect dipolar polarization substantially contributed to the intrinsic polarization of Bi0.85Ho0.15FeO3 under strong electric fields at low frequencies.",
journal = "Ceramics International",
title = "Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition",
volume = "43",
number = "18",
pages = "16531-16538",
doi = "10.1016/j.ceramint.2017.09.038"
}

Stojadinović, B., Dohčević-Mitrović, Z., Stepanenko, D., Rosić, M., Petronijević, I. M., Tasić, N. B., Ilić, N., Matović, B.,& Stojanovic, B.. (2017). Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition. in Ceramics International, 43(18), 16531-16538.
https://doi.org/10.1016/j.ceramint.2017.09.038

Stojadinović B, Dohčević-Mitrović Z, Stepanenko D, Rosić M, Petronijević IM, Tasić NB, Ilić N, Matović B, Stojanovic B. Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition. in Ceramics International. 2017;43(18):16531-16538.
doi:10.1016/j.ceramint.2017.09.038 .

Stojadinović, Bojan, Dohčević-Mitrović, Zorana , Stepanenko, Dimitrije, Rosić, Milena, Petronijević, Ivan M., Tasić, Nikola B., Ilić, Nikola, Matović, Branko, Stojanovic, Biljana, "Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition" in Ceramics International, 43, no. 18 (2017):16531-16538,
https://doi.org/10.1016/j.ceramint.2017.09.038 . .

TY  - JOUR
AU  - Matović, Branko
AU  - Luković, Jelena M.
AU  - Stojadinović, Bojan
AU  - Aškrabić, Sonja
AU  - Zarubica, Aleksandra R.
AU  - Babić, Biljana M.
AU  - Dohčević-Mitrović, Zorana 
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1905
AB  - Nanosized Mg-doped ceria powders were obtained by self-propagating room temperature reaction without using surfactants or templates. X-ray diffraction analysis and field emission scanning microscopy results showed that the doped samples are solid solutions with fluorite-type structure and spherical morphology. Raman spectra revealed an increase in the amount of oxygen vacancies with the increase of Mg concentration. This increasing results in a narrowing of the bandgap of CeO2. The photocatalytic performances of the Mg-doped ceria solid solutions were evaluated by decomposing an organic dye, crystal violet under UV irradiation. The Mg-doped ceria solid solutions exhibit significantly better photocatalytic activity than the pure CeO2 and commercial TiO2. The higher first rate constant of the Mg-doped samples demonstrated that they are much more efficient than TiO2 and CeO2 under UV light. Mg2+ dopant ions and oxygen vacancies play a significant role in the enhancement of photocatalytic performances of the Mg-doped ceria.
T2  - Processing and Application of Ceramics
T1  - Influence of Mg doping on structural, optical and photocatalytic performances of ceria nanopowders
VL  - 11
IS  - 4
SP  - 304
EP  - 310
DO  - 10.2298/PAC1704304M
ER  - 

@article{
author = "Matović, Branko and Luković, Jelena M. and Stojadinović, Bojan and Aškrabić, Sonja and Zarubica, Aleksandra R. and Babić, Biljana M. and Dohčević-Mitrović, Zorana ",
year = "2017",
abstract = "Nanosized Mg-doped ceria powders were obtained by self-propagating room temperature reaction without using surfactants or templates. X-ray diffraction analysis and field emission scanning microscopy results showed that the doped samples are solid solutions with fluorite-type structure and spherical morphology. Raman spectra revealed an increase in the amount of oxygen vacancies with the increase of Mg concentration. This increasing results in a narrowing of the bandgap of CeO2. The photocatalytic performances of the Mg-doped ceria solid solutions were evaluated by decomposing an organic dye, crystal violet under UV irradiation. The Mg-doped ceria solid solutions exhibit significantly better photocatalytic activity than the pure CeO2 and commercial TiO2. The higher first rate constant of the Mg-doped samples demonstrated that they are much more efficient than TiO2 and CeO2 under UV light. Mg2+ dopant ions and oxygen vacancies play a significant role in the enhancement of photocatalytic performances of the Mg-doped ceria.",
journal = "Processing and Application of Ceramics",
title = "Influence of Mg doping on structural, optical and photocatalytic performances of ceria nanopowders",
volume = "11",
number = "4",
pages = "304-310",
doi = "10.2298/PAC1704304M"
}

Matović, B., Luković, J. M., Stojadinović, B., Aškrabić, S., Zarubica, A. R., Babić, B. M.,& Dohčević-Mitrović, Z.. (2017). Influence of Mg doping on structural, optical and photocatalytic performances of ceria nanopowders. in Processing and Application of Ceramics, 11(4), 304-310.
https://doi.org/10.2298/PAC1704304M

Matović B, Luković JM, Stojadinović B, Aškrabić S, Zarubica AR, Babić BM, Dohčević-Mitrović Z. Influence of Mg doping on structural, optical and photocatalytic performances of ceria nanopowders. in Processing and Application of Ceramics. 2017;11(4):304-310.
doi:10.2298/PAC1704304M .

Matović, Branko, Luković, Jelena M., Stojadinović, Bojan, Aškrabić, Sonja, Zarubica, Aleksandra R., Babić, Biljana M., Dohčević-Mitrović, Zorana , "Influence of Mg doping on structural, optical and photocatalytic performances of ceria nanopowders" in Processing and Application of Ceramics, 11, no. 4 (2017):304-310,
https://doi.org/10.2298/PAC1704304M . .

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Veljkovic, Ivana
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Tomić, Nataša
AU  - Mijin, Dušan Ž.
AU  - Babić, Biljana M.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1020
AB  - Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants
VL  - 22
IS  - 1
SP  - 65
EP  - 73
DO  - 10.2298/CICEQ150110020G
ER  - 

@article{
author = "Golubović, Aleksandar V. and Veljkovic, Ivana and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Tomić, Nataša and Mijin, Dušan Ž. and Babić, Biljana M.",
year = "2016",
abstract = "Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration of calcination (1.5, 2 and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders were dominantly in the anatase phase, with the presence of a small amount of rutile in samples calcined at 550 degrees C. According to the results obtained by the Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower temperature, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and line-width of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), car-bofuran ray scattering.",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants",
volume = "22",
number = "1",
pages = "65-73",
doi = "10.2298/CICEQ150110020G"
}

Golubović, A. V., Veljkovic, I., Šćepanović, M., Grujić-Brojčin, M., Tomić, N., Mijin, D. Ž.,& Babić, B. M.. (2016). Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants. in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 22(1), 65-73.
https://doi.org/10.2298/CICEQ150110020G

Golubović AV, Veljkovic I, Šćepanović M, Grujić-Brojčin M, Tomić N, Mijin DŽ, Babić BM. Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2016;22(1):65-73.
doi:10.2298/CICEQ150110020G .

Golubović, Aleksandar V., Veljkovic, Ivana, Šćepanović, Maja, Grujić-Brojčin, Mirjana, Tomić, Nataša, Mijin, Dušan Ž., Babić, Biljana M., "Influence of Some Sol-Gel Synthesis Parameters of Mesoporous Tio2 on Photocatalytic Degradation of Pollutants" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 22, no. 1 (2016):65-73,
https://doi.org/10.2298/CICEQ150110020G . .

TY  - JOUR
AU  - Dohčević-Mitrović, Zorana 
AU  - Stojadinovic, Stevan
AU  - Lozzi, Luca
AU  - Aškrabić, Sonja
AU  - Rosić, Milena
AU  - Tomić, Nataša
AU  - Paunović, Novica M.
AU  - Lazović, Saša
AU  - Nikolić, Marko G.
AU  - Santucci, Sandro
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1234
AB  - WO3/TiO2 and TiO2 coatings were prepared on titania substrates using facile and cost-effective plasma electrolytic oxidation process. The coatings were characterized by X-ray diffraction, scanning electron microscopy, Raman, UV vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. With increasing duration of PEO process, the monoclinic WO3 phase became dominant and new monoclinic WO2.95 phase appeared. The optical absorption edge in the WO3/TiO2 samples, enriched with WO3/WO2.96 phase, was shifted to the visible region. The photocatalytic efficiency of WO3/TiO2 and pure TiO2 samples was evaluated by performing the photodegradation experiments in an aqueous solution of Rhodamine 6G and Mordant Blue 9 under the visible and UV light. The WO3/TiO2 catalysts are much more efficient than pure TiO2 under visible light and slightly better under UV light. The improvement of photocatalytic activity in the visible region is attributed to better light absorption, higher adsorption affinity and increased charge separation efficiency. (C) 2016 Elsevier Ltd. All rights reserved.
T2  - Materials Research Bulletin
T1  - WO3/TiO2 composite coatings: Structural, optical and photocatalytic properties
VL  - 83
SP  - 217
EP  - 224
DO  - 10.1016/j.materresbull.2016.06.011
ER  - 

@article{
author = "Dohčević-Mitrović, Zorana  and Stojadinovic, Stevan and Lozzi, Luca and Aškrabić, Sonja and Rosić, Milena and Tomić, Nataša and Paunović, Novica M. and Lazović, Saša and Nikolić, Marko G. and Santucci, Sandro",
year = "2016",
abstract = "WO3/TiO2 and TiO2 coatings were prepared on titania substrates using facile and cost-effective plasma electrolytic oxidation process. The coatings were characterized by X-ray diffraction, scanning electron microscopy, Raman, UV vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. With increasing duration of PEO process, the monoclinic WO3 phase became dominant and new monoclinic WO2.95 phase appeared. The optical absorption edge in the WO3/TiO2 samples, enriched with WO3/WO2.96 phase, was shifted to the visible region. The photocatalytic efficiency of WO3/TiO2 and pure TiO2 samples was evaluated by performing the photodegradation experiments in an aqueous solution of Rhodamine 6G and Mordant Blue 9 under the visible and UV light. The WO3/TiO2 catalysts are much more efficient than pure TiO2 under visible light and slightly better under UV light. The improvement of photocatalytic activity in the visible region is attributed to better light absorption, higher adsorption affinity and increased charge separation efficiency. (C) 2016 Elsevier Ltd. All rights reserved.",
journal = "Materials Research Bulletin",
title = "WO3/TiO2 composite coatings: Structural, optical and photocatalytic properties",
volume = "83",
pages = "217-224",
doi = "10.1016/j.materresbull.2016.06.011"
}

Dohčević-Mitrović, Z., Stojadinovic, S., Lozzi, L., Aškrabić, S., Rosić, M., Tomić, N., Paunović, N. M., Lazović, S., Nikolić, M. G.,& Santucci, S.. (2016). WO3/TiO2 composite coatings: Structural, optical and photocatalytic properties. in Materials Research Bulletin, 83, 217-224.
https://doi.org/10.1016/j.materresbull.2016.06.011

Dohčević-Mitrović Z, Stojadinovic S, Lozzi L, Aškrabić S, Rosić M, Tomić N, Paunović NM, Lazović S, Nikolić MG, Santucci S. WO3/TiO2 composite coatings: Structural, optical and photocatalytic properties. in Materials Research Bulletin. 2016;83:217-224.
doi:10.1016/j.materresbull.2016.06.011 .

Dohčević-Mitrović, Zorana , Stojadinovic, Stevan, Lozzi, Luca, Aškrabić, Sonja, Rosić, Milena, Tomić, Nataša, Paunović, Novica M., Lazović, Saša, Nikolić, Marko G., Santucci, Sandro, "WO3/TiO2 composite coatings: Structural, optical and photocatalytic properties" in Materials Research Bulletin, 83 (2016):217-224,
https://doi.org/10.1016/j.materresbull.2016.06.011 . .

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Simović, Bojana
AU  - Šćepanović, Maja
AU  - Mijin, Dušan Ž.
AU  - Matkovic, A.
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/566
AB  - The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor, varying the temperature of calcination (from 500 to 550 degrees C with the step of 10 degrees C). XRPD results have shown that all synthesized nanopowders are dominantly in anatase phase. The analysis of the shift and linewidth of the most intensive anatase E-g Raman mode confirmed the XRPD results and added the presence of small amount of highly disordered brookite phase in all samples. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 1.5 and 4.5 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16). The sample calcined at temperature of 510 degrees C showed the best photocatalytic performance.
T2  - Science of Sintering
T1  - Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties
VL  - 47
IS  - 1
SP  - 41
EP  - 49
DO  - 10.2298/SOS1501041G
ER  - 

@article{
author = "Golubović, Aleksandar V. and Simović, Bojana and Šćepanović, Maja and Mijin, Dušan Ž. and Matkovic, A. and Grujić-Brojčin, Mirjana and Babić, Biljana M.",
year = "2015",
abstract = "The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor, varying the temperature of calcination (from 500 to 550 degrees C with the step of 10 degrees C). XRPD results have shown that all synthesized nanopowders are dominantly in anatase phase. The analysis of the shift and linewidth of the most intensive anatase E-g Raman mode confirmed the XRPD results and added the presence of small amount of highly disordered brookite phase in all samples. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 1.5 and 4.5 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16). The sample calcined at temperature of 510 degrees C showed the best photocatalytic performance.",
journal = "Science of Sintering",
title = "Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties",
volume = "47",
number = "1",
pages = "41-49",
doi = "10.2298/SOS1501041G"
}

Golubović, A. V., Simović, B., Šćepanović, M., Mijin, D. Ž., Matkovic, A., Grujić-Brojčin, M.,& Babić, B. M.. (2015). Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties. in Science of Sintering, 47(1), 41-49.
https://doi.org/10.2298/SOS1501041G

Golubović AV, Simović B, Šćepanović M, Mijin DŽ, Matkovic A, Grujić-Brojčin M, Babić BM. Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties. in Science of Sintering. 2015;47(1):41-49.
doi:10.2298/SOS1501041G .

Golubović, Aleksandar V., Simović, Bojana, Šćepanović, Maja, Mijin, Dušan Ž., Matkovic, A., Grujić-Brojčin, Mirjana, Babić, Biljana M., "Synthesis of Anatase Nanopowders by Sol-gel Method and Influence of Temperatures of Calcination to Their Photocatalitic Properties" in Science of Sintering, 47, no. 1 (2015):41-49,
https://doi.org/10.2298/SOS1501041G . .

TY  - JOUR
AU  - Tomić, Nataša
AU  - Grujić-Brojčin, Mirjana
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Simović, Bojana
AU  - Krstić, Jugoslav B.
AU  - Matović, Branko
AU  - Šćepanović, Maja
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/821
AB  - Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route
VL  - 163
SP  - 518
EP  - 528
DO  - 10.1016/j.matchemphys.2015.08.008
ER  - 

@article{
author = "Tomić, Nataša and Grujić-Brojčin, Mirjana and Finčur, Nina L. and Abramović, Biljana F. and Simović, Bojana and Krstić, Jugoslav B. and Matović, Branko and Šćepanović, Maja",
year = "2015",
abstract = "Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route",
volume = "163",
pages = "518-528",
doi = "10.1016/j.matchemphys.2015.08.008"
}

Tomić, N., Grujić-Brojčin, M., Finčur, N. L., Abramović, B. F., Simović, B., Krstić, J. B., Matović, B.,& Šćepanović, M.. (2015). Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics
Elsevier., 163, 518-528.
https://doi.org/10.1016/j.matchemphys.2015.08.008

Tomić N, Grujić-Brojčin M, Finčur NL, Abramović BF, Simović B, Krstić JB, Matović B, Šćepanović M. Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics. 2015;163:518-528.
doi:10.1016/j.matchemphys.2015.08.008 .

Tomić, Nataša, Grujić-Brojčin, Mirjana, Finčur, Nina L., Abramović, Biljana F., Simović, Bojana, Krstić, Jugoslav B., Matović, Branko, Šćepanović, Maja, "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route" in Materials Chemistry and Physics, 163 (2015):518-528,
https://doi.org/10.1016/j.matchemphys.2015.08.008 . .

TY  - JOUR
AU  - Radović, Marko B.
AU  - Dohcevic-Mitrovic, Z.
AU  - Paunović, Novica M.
AU  - Bošković, Snežana B.
AU  - Tomić, Nataša
AU  - Tadić, Nenad
AU  - Belca, I.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/379
AB  - Plasmon-longitudinal-optical (LO) phonon interaction in pure and Nd-doped CeO2-y nanocrystals was investigated by measuring far-infrared reflectivity spectra in the 100-700 cm(-1) spectral range at room temperature. Analysis of the obtained results revealed that the presence of free charge carriers becomes significant with the particle size decrease to nanometer range and increase of lattice defects. The free charge carriers were found to be responsible for a plasmon mode which coupled strongly with two LO phonon modes of ceria. The presence of more pronounced low-frequency Drude tail and the screening of the phonon modes in Nd-doped CeO2-y nanocrystals implied that the Plasmon-LO phonon interaction increased with doping. Factorized and additive dielectric function models were applied to deduce about the coupled and decoupled LO phonon frequencies and the structure of the decoupled plasmon mode in pure and Nd-doped CeO2-y nanocrystals. These models were combined with Bruggeman effective medium approximation in order to properly describe the influence of porosity on the infrared reflectivity spectra. With increasing dopant content, the decoupled plasmon mode exhibited redshift and damping decrease implying that doping induced semiconductor-to-metalic state transition took place.
T2  - Journal of Physics. D: Applied Physics
T1  - Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals
VL  - 48
IS  - 6
DO  - 10.1088/0022-3727/48/6/065301
ER  - 

@article{
author = "Radović, Marko B. and Dohcevic-Mitrovic, Z. and Paunović, Novica M. and Bošković, Snežana B. and Tomić, Nataša and Tadić, Nenad and Belca, I.",
year = "2015",
abstract = "Plasmon-longitudinal-optical (LO) phonon interaction in pure and Nd-doped CeO2-y nanocrystals was investigated by measuring far-infrared reflectivity spectra in the 100-700 cm(-1) spectral range at room temperature. Analysis of the obtained results revealed that the presence of free charge carriers becomes significant with the particle size decrease to nanometer range and increase of lattice defects. The free charge carriers were found to be responsible for a plasmon mode which coupled strongly with two LO phonon modes of ceria. The presence of more pronounced low-frequency Drude tail and the screening of the phonon modes in Nd-doped CeO2-y nanocrystals implied that the Plasmon-LO phonon interaction increased with doping. Factorized and additive dielectric function models were applied to deduce about the coupled and decoupled LO phonon frequencies and the structure of the decoupled plasmon mode in pure and Nd-doped CeO2-y nanocrystals. These models were combined with Bruggeman effective medium approximation in order to properly describe the influence of porosity on the infrared reflectivity spectra. With increasing dopant content, the decoupled plasmon mode exhibited redshift and damping decrease implying that doping induced semiconductor-to-metalic state transition took place.",
journal = "Journal of Physics. D: Applied Physics",
title = "Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals",
volume = "48",
number = "6",
doi = "10.1088/0022-3727/48/6/065301"
}

Radović, M. B., Dohcevic-Mitrovic, Z., Paunović, N. M., Bošković, S. B., Tomić, N., Tadić, N.,& Belca, I.. (2015). Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals. in Journal of Physics. D: Applied Physics, 48(6).
https://doi.org/10.1088/0022-3727/48/6/065301

Radović MB, Dohcevic-Mitrovic Z, Paunović NM, Bošković SB, Tomić N, Tadić N, Belca I. Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals. in Journal of Physics. D: Applied Physics. 2015;48(6).
doi:10.1088/0022-3727/48/6/065301 .

Radović, Marko B., Dohcevic-Mitrovic, Z., Paunović, Novica M., Bošković, Snežana B., Tomić, Nataša, Tadić, Nenad, Belca, I., "Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals" in Journal of Physics. D: Applied Physics, 48, no. 6 (2015),
https://doi.org/10.1088/0022-3727/48/6/065301 . .

TY  - JOUR
AU  - Dohcevic-Mitrovic, Z. D.
AU  - Paunović, Novica M.
AU  - Matović, Branko
AU  - Osiceanu, P.
AU  - Scurtu, R.
AU  - Askrabic, S.
AU  - Radović, Marko B.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/505
AB  - Y-doped HfO2 nanopowders, produced by metathesis synthesis, exhibit ferromagnetism at room temperature. The X-ray diffraction and Raman measurements have shown that HfO2 nanopowders undergo phase transformation from monoclinic to tetragonal and cubic phase with increasing of Y content. The X-ray photoelectron spectroscopy and Raman analysis gave evidence that Y-doped HfO2 nanopowders are oxygen deficient. The ferromagnetic properties of Y-doped HfO2 nanocrystals are dependent on crystal structure changes. The structural transformation from monoclinic to tetragonal phase with Y doping is followed by increased ferromagnetic ordering because of the increased concentration of oxygen vacancies (V-O) in different charge states. Higher Y content favors the formation of cubic phase and the ferromagnetism significantly weakens. In cubic hafnia phase, yttrium can form (V-O-Y-Hf) defect complexes in different charge states. The appearance of these complexes can be responsible for the degradation of ferromagnetic ordering. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Structural dependent room-temperature ferromagnetism in yttrium doped HfO2 nanoparticles
VL  - 41
IS  - 5
SP  - 6970
EP  - 6977
DO  - 10.1016/j.ceramint.2015.02.002
ER  - 

@article{
author = "Dohcevic-Mitrovic, Z. D. and Paunović, Novica M. and Matović, Branko and Osiceanu, P. and Scurtu, R. and Askrabic, S. and Radović, Marko B.",
year = "2015",
abstract = "Y-doped HfO2 nanopowders, produced by metathesis synthesis, exhibit ferromagnetism at room temperature. The X-ray diffraction and Raman measurements have shown that HfO2 nanopowders undergo phase transformation from monoclinic to tetragonal and cubic phase with increasing of Y content. The X-ray photoelectron spectroscopy and Raman analysis gave evidence that Y-doped HfO2 nanopowders are oxygen deficient. The ferromagnetic properties of Y-doped HfO2 nanocrystals are dependent on crystal structure changes. The structural transformation from monoclinic to tetragonal phase with Y doping is followed by increased ferromagnetic ordering because of the increased concentration of oxygen vacancies (V-O) in different charge states. Higher Y content favors the formation of cubic phase and the ferromagnetism significantly weakens. In cubic hafnia phase, yttrium can form (V-O-Y-Hf) defect complexes in different charge states. The appearance of these complexes can be responsible for the degradation of ferromagnetic ordering. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Structural dependent room-temperature ferromagnetism in yttrium doped HfO2 nanoparticles",
volume = "41",
number = "5",
pages = "6970-6977",
doi = "10.1016/j.ceramint.2015.02.002"
}

Dohcevic-Mitrovic, Z. D., Paunović, N. M., Matović, B., Osiceanu, P., Scurtu, R., Askrabic, S.,& Radović, M. B.. (2015). Structural dependent room-temperature ferromagnetism in yttrium doped HfO2 nanoparticles. in Ceramics International, 41(5), 6970-6977.
https://doi.org/10.1016/j.ceramint.2015.02.002

Dohcevic-Mitrovic ZD, Paunović NM, Matović B, Osiceanu P, Scurtu R, Askrabic S, Radović MB. Structural dependent room-temperature ferromagnetism in yttrium doped HfO2 nanoparticles. in Ceramics International. 2015;41(5):6970-6977.
doi:10.1016/j.ceramint.2015.02.002 .

Dohcevic-Mitrovic, Z. D., Paunović, Novica M., Matović, Branko, Osiceanu, P., Scurtu, R., Askrabic, S., Radović, Marko B., "Structural dependent room-temperature ferromagnetism in yttrium doped HfO2 nanoparticles" in Ceramics International, 41, no. 5 (2015):6970-6977,
https://doi.org/10.1016/j.ceramint.2015.02.002 . .

TY  - JOUR
AU  - Tomić, Nataša
AU  - Dohčević-Mitrović, Zorana
AU  - Paunović, Novica M.
AU  - Mijin, Dušan Ž.
AU  - Radić, Nenad D.
AU  - Grbic, Bosko V.
AU  - Aškrabić, Sonja
AU  - Babić, Biljana M.
AU  - Bajuk-Bogdanović, Danica V.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9685
AB  - Ultrafine CeO2-delta nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.
T2  - Langmuir
T1  - Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes
VL  - 30
IS  - 39
SP  - 11582
EP  - 11590
DO  - 10.1021/la502969w
ER  - 

@article{
author = "Tomić, Nataša and Dohčević-Mitrović, Zorana and Paunović, Novica M. and Mijin, Dušan Ž. and Radić, Nenad D. and Grbic, Bosko V. and Aškrabić, Sonja and Babić, Biljana M. and Bajuk-Bogdanović, Danica V.",
year = "2014",
abstract = "Ultrafine CeO2-delta nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.",
journal = "Langmuir",
title = "Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes",
volume = "30",
number = "39",
pages = "11582-11590",
doi = "10.1021/la502969w"
}

Tomić, N., Dohčević-Mitrović, Z., Paunović, N. M., Mijin, D. Ž., Radić, N. D., Grbic, B. V., Aškrabić, S., Babić, B. M.,& Bajuk-Bogdanović, D. V.. (2014). Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes. in Langmuir, 30(39), 11582-11590.
https://doi.org/10.1021/la502969w

Tomić N, Dohčević-Mitrović Z, Paunović NM, Mijin DŽ, Radić ND, Grbic BV, Aškrabić S, Babić BM, Bajuk-Bogdanović DV. Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes. in Langmuir. 2014;30(39):11582-11590.
doi:10.1021/la502969w .

Tomić, Nataša, Dohčević-Mitrović, Zorana, Paunović, Novica M., Mijin, Dušan Ž., Radić, Nenad D., Grbic, Bosko V., Aškrabić, Sonja, Babić, Biljana M., Bajuk-Bogdanović, Danica V., "Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes" in Langmuir, 30, no. 39 (2014):11582-11590,
https://doi.org/10.1021/la502969w . .

TY  - JOUR
AU  - Grujić-Brojčin, Mirjana
AU  - Armaković, Sanja J.
AU  - Tomić, Nataša
AU  - Abramović, Biljana F.
AU  - Golubavic, A.
AU  - Stojadinovic, B.
AU  - Kremenović, Aleksandar S.
AU  - Babić, Biljana M.
AU  - Dohcevic-Mitrovic, Z.
AU  - Šćepanović, Maja
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5881
AB  - The influence of La-doping in the range of 0.5-6.0 mol% on structural and morphological properties of TiO2 nanopowders synthesized by sol-gel routine has been investigated by XRPD, AFM, EDS and BET measurements, as well as Raman spectroscopy. The XRPD and Raman measurements have revealed the anatase phase as dominant in all nanopowders, with crystallite size decreasing from similar to 15 nm in pure TiO2 to similar to 12 nm in La-doped samples. The BET data suggest that all samples are fully mesoporous, with mean pore diameters in the range of similar to 6-8 nm. The specific surface area and the complexity of pore structure are greater in doped samples than in pure TiO2 sample. The spectroscopic ellipsometry has apparently shown that the band gap has been gradually increased with the increase of La content. The STM and STS techniques have been used successfully to evaluate the surface morphology and electronic properties of La-doped nanopowders. All investigated properties have been related to photocatalytic activity, tested in degradation of a metoprolol tartrate salt (0.05 mM), and induced by UV-radiation. All doped samples showed increased photocatalytic activity compared to pure TiO2, among which the 0.65 mol% La-doped sample appeared to be the most efficient. (C) 2013 Elsevier Inc. All rights reserved.
T2  - Materials Characterization
T1  - Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping
VL  - 88
SP  - 30
EP  - 41
DO  - 10.1016/j.matchar.2013.12.002
ER  - 

@article{
author = "Grujić-Brojčin, Mirjana and Armaković, Sanja J. and Tomić, Nataša and Abramović, Biljana F. and Golubavic, A. and Stojadinovic, B. and Kremenović, Aleksandar S. and Babić, Biljana M. and Dohcevic-Mitrovic, Z. and Šćepanović, Maja",
year = "2014",
abstract = "The influence of La-doping in the range of 0.5-6.0 mol% on structural and morphological properties of TiO2 nanopowders synthesized by sol-gel routine has been investigated by XRPD, AFM, EDS and BET measurements, as well as Raman spectroscopy. The XRPD and Raman measurements have revealed the anatase phase as dominant in all nanopowders, with crystallite size decreasing from similar to 15 nm in pure TiO2 to similar to 12 nm in La-doped samples. The BET data suggest that all samples are fully mesoporous, with mean pore diameters in the range of similar to 6-8 nm. The specific surface area and the complexity of pore structure are greater in doped samples than in pure TiO2 sample. The spectroscopic ellipsometry has apparently shown that the band gap has been gradually increased with the increase of La content. The STM and STS techniques have been used successfully to evaluate the surface morphology and electronic properties of La-doped nanopowders. All investigated properties have been related to photocatalytic activity, tested in degradation of a metoprolol tartrate salt (0.05 mM), and induced by UV-radiation. All doped samples showed increased photocatalytic activity compared to pure TiO2, among which the 0.65 mol% La-doped sample appeared to be the most efficient. (C) 2013 Elsevier Inc. All rights reserved.",
journal = "Materials Characterization",
title = "Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping",
volume = "88",
pages = "30-41",
doi = "10.1016/j.matchar.2013.12.002"
}

Grujić-Brojčin, M., Armaković, S. J., Tomić, N., Abramović, B. F., Golubavic, A., Stojadinovic, B., Kremenović, A. S., Babić, B. M., Dohcevic-Mitrovic, Z.,& Šćepanović, M.. (2014). Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping. in Materials Characterization, 88, 30-41.
https://doi.org/10.1016/j.matchar.2013.12.002

Grujić-Brojčin M, Armaković SJ, Tomić N, Abramović BF, Golubavic A, Stojadinovic B, Kremenović AS, Babić BM, Dohcevic-Mitrovic Z, Šćepanović M. Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping. in Materials Characterization. 2014;88:30-41.
doi:10.1016/j.matchar.2013.12.002 .

Grujić-Brojčin, Mirjana, Armaković, Sanja J., Tomić, Nataša, Abramović, Biljana F., Golubavic, A., Stojadinovic, B., Kremenović, Aleksandar S., Babić, Biljana M., Dohcevic-Mitrovic, Z., Šćepanović, Maja, "Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping" in Materials Characterization, 88 (2014):30-41,
https://doi.org/10.1016/j.matchar.2013.12.002 . .

TY  - JOUR
AU  - Tomić, Nataša
AU  - Dohčević-Mitrović, Zorana
AU  - Paunović, Novica M.
AU  - Mijin, Dušan Ž.
AU  - Radić, Nenad D.
AU  - Grbic, Bosko V.
AU  - Aškrabić, Sonja
AU  - Babić, Biljana M.
AU  - Bajuk-Bogdanović, Danica V.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/156
AB  - Ultrafine CeO2-delta nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.
T2  - Langmuir
T1  - Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes
VL  - 30
IS  - 39
SP  - 11582
EP  - 11590
DO  - 10.1021/la502969w
ER  - 

@article{
author = "Tomić, Nataša and Dohčević-Mitrović, Zorana and Paunović, Novica M. and Mijin, Dušan Ž. and Radić, Nenad D. and Grbic, Bosko V. and Aškrabić, Sonja and Babić, Biljana M. and Bajuk-Bogdanović, Danica V.",
year = "2014",
abstract = "Ultrafine CeO2-delta nanopowder, prepared by a simple and cost-effective self-propagating room temperature synthesis method (SPRT), showed high adsorption capability for removal of different azo dyes. Batch type of adsorption experiments with fixed initial pH value were conducted for the removal of Reactive Orange 16 (RO16), Methyl Orange (MO), and Mordant Blue 9 (MB9). The equilibrium adsorption data were evaluated using Freundlich and Langmuir isotherm models. The Langmuir model slightly better describes isotherm data for RO16 and MO, whereas the Freundlich model was found to best fit the isotherm data for MB9 over the whole concentration range. The maximum adsorption capacities, determined from isotherm data for MO, MB9, and RO16 were 113, 101, and 91 mg g(1) respectively. The adsorption process follows the pseudo-second-order kinetic model indicating the coexistence of chemisorption and physisorption. The mechanism of azo dye adsorption is also discussed.",
journal = "Langmuir",
title = "Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes",
volume = "30",
number = "39",
pages = "11582-11590",
doi = "10.1021/la502969w"
}

Tomić, N., Dohčević-Mitrović, Z., Paunović, N. M., Mijin, D. Ž., Radić, N. D., Grbic, B. V., Aškrabić, S., Babić, B. M.,& Bajuk-Bogdanović, D. V.. (2014). Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes. in Langmuir, 30(39), 11582-11590.
https://doi.org/10.1021/la502969w

Tomić N, Dohčević-Mitrović Z, Paunović NM, Mijin DŽ, Radić ND, Grbic BV, Aškrabić S, Babić BM, Bajuk-Bogdanović DV. Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes. in Langmuir. 2014;30(39):11582-11590.
doi:10.1021/la502969w .

Tomić, Nataša, Dohčević-Mitrović, Zorana, Paunović, Novica M., Mijin, Dušan Ž., Radić, Nenad D., Grbic, Bosko V., Aškrabić, Sonja, Babić, Biljana M., Bajuk-Bogdanović, Danica V., "Nanocrystalline CeO2-delta as Effective Adsorbent of Azo Dyes" in Langmuir, 30, no. 39 (2014):11582-11590,
https://doi.org/10.1021/la502969w . .

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Tomić, Nataša
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Veljkovic, I.
AU  - Zdravkovic, J.
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
AU  - Stojadinovic, B.
AU  - Šćepanović, Maja
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/127
AB  - Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam
VL  - 40
IS  - 8
SP  - 13409
EP  - 13418
DO  - 10.1016/j.ceramint.2014.05.060
ER  - 

@article{
author = "Golubović, Aleksandar V. and Tomić, Nataša and Finčur, Nina L. and Abramović, Biljana F. and Veljkovic, I. and Zdravkovic, J. and Grujić-Brojčin, Mirjana and Babić, Biljana M. and Stojadinovic, B. and Šćepanović, Maja",
year = "2014",
abstract = "Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam",
volume = "40",
number = "8",
pages = "13409-13418",
doi = "10.1016/j.ceramint.2014.05.060"
}

Golubović, A. V., Tomić, N., Finčur, N. L., Abramović, B. F., Veljkovic, I., Zdravkovic, J., Grujić-Brojčin, M., Babić, B. M., Stojadinovic, B.,& Šćepanović, M.. (2014). Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International, 40(8), 13409-13418.
https://doi.org/10.1016/j.ceramint.2014.05.060

Golubović AV, Tomić N, Finčur NL, Abramović BF, Veljkovic I, Zdravkovic J, Grujić-Brojčin M, Babić BM, Stojadinovic B, Šćepanović M. Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International. 2014;40(8):13409-13418.
doi:10.1016/j.ceramint.2014.05.060 .

Golubović, Aleksandar V., Tomić, Nataša, Finčur, Nina L., Abramović, Biljana F., Veljkovic, I., Zdravkovic, J., Grujić-Brojčin, Mirjana, Babić, Biljana M., Stojadinovic, B., Šćepanović, Maja, "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam" in Ceramics International, 40, no. 8 (2014):13409-13418,
https://doi.org/10.1016/j.ceramint.2014.05.060 . .

TY  - JOUR
AU  - Radović, Marko B.
AU  - Stojadinović, Bojan
AU  - Tomić, Nataša
AU  - Golubović, Aleksandar V.
AU  - Matović, Branko
AU  - Veljkovic, Ivana
AU  - Dohčević-Mitrović, Zorana 
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/308
AB  - Synthesis process strongly influences the nanocrystalline CeO2-y defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO2-y samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO2-y samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO2-y nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO2-y nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F+ and F-0) can be formed in the CeO2-y nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals. (C) 2014 AIP Publishing LLC.
T2  - Journal of Applied Physics
T1  - Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry
VL  - 116
IS  - 23
DO  - 10.1063/1.4904516
ER  - 

@article{
author = "Radović, Marko B. and Stojadinović, Bojan and Tomić, Nataša and Golubović, Aleksandar V. and Matović, Branko and Veljkovic, Ivana and Dohčević-Mitrović, Zorana ",
year = "2014",
abstract = "Synthesis process strongly influences the nanocrystalline CeO2-y defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO2-y samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO2-y samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO2-y nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO2-y nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F+ and F-0) can be formed in the CeO2-y nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals. (C) 2014 AIP Publishing LLC.",
journal = "Journal of Applied Physics",
title = "Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry",
volume = "116",
number = "23",
doi = "10.1063/1.4904516"
}

Radović, M. B., Stojadinović, B., Tomić, N., Golubović, A. V., Matović, B., Veljkovic, I.,& Dohčević-Mitrović, Z.. (2014). Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry. in Journal of Applied Physics, 116(23).
https://doi.org/10.1063/1.4904516

Radović MB, Stojadinović B, Tomić N, Golubović AV, Matović B, Veljkovic I, Dohčević-Mitrović Z. Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry. in Journal of Applied Physics. 2014;116(23).
doi:10.1063/1.4904516 .

Radović, Marko B., Stojadinović, Bojan, Tomić, Nataša, Golubović, Aleksandar V., Matović, Branko, Veljkovic, Ivana, Dohčević-Mitrović, Zorana , "Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry" in Journal of Applied Physics, 116, no. 23 (2014),
https://doi.org/10.1063/1.4904516 . .

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Abramović, Biljana F.
AU  - Šćepanović, Maja
AU  - Grujić-Brojčin, Mirjana
AU  - Armaković, Sanja J.
AU  - Veljkovic, I.
AU  - Babić, Biljana M.
AU  - Dohcevic-Mitrovic, Z.
AU  - Popović, Zoran V.
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5421
AB  - The structural and morphological properties of mesoporous anatase nanopowders, synthesized by sol-gel method, have been modified by varying the duration of calcination, in order to obtain more efficient photocatalyst than Degussa P25 in the degradation of relatively large pollutant molecules ( GT 1 nm in size). According to X-ray diffraction analysis, the crystallite size was increased from 13 to 17.5 nm with the increase of calcination time from 1 to 7 h. The analysis of nitrogen sorption experimental data revealed that all samples were mesoporous, with a mean pore diameters in the range of similar to 5-9 nm. The corrugated pore structure model was employed to evaluate pore structure tortuosity. Nanopowder properties have been related to the photocatalytic activity, tested in the degradation of metoprolol tartrate salt, selective beta(1)-blocker used in a variety of cardiovascular diseases, with molecular size of 0.610 nm x 1.347 nm. The study has demonstrated that samples calcined for 4 and 5 h have displayed higher photocatalytic performance than Degussa P25, whereas the sample calcined for 3 h has shown comparable activity. (C) 2013 Published by Elsevier Ltd.
T2  - Materials Research Bulletin
T1  - Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol
VL  - 48
IS  - 4
SP  - 1363
EP  - 1371
DO  - 10.1016/j.materresbull.2012.11.098
ER  - 

@article{
author = "Golubović, Aleksandar V. and Abramović, Biljana F. and Šćepanović, Maja and Grujić-Brojčin, Mirjana and Armaković, Sanja J. and Veljkovic, I. and Babić, Biljana M. and Dohcevic-Mitrovic, Z. and Popović, Zoran V.",
year = "2013",
abstract = "The structural and morphological properties of mesoporous anatase nanopowders, synthesized by sol-gel method, have been modified by varying the duration of calcination, in order to obtain more efficient photocatalyst than Degussa P25 in the degradation of relatively large pollutant molecules ( GT 1 nm in size). According to X-ray diffraction analysis, the crystallite size was increased from 13 to 17.5 nm with the increase of calcination time from 1 to 7 h. The analysis of nitrogen sorption experimental data revealed that all samples were mesoporous, with a mean pore diameters in the range of similar to 5-9 nm. The corrugated pore structure model was employed to evaluate pore structure tortuosity. Nanopowder properties have been related to the photocatalytic activity, tested in the degradation of metoprolol tartrate salt, selective beta(1)-blocker used in a variety of cardiovascular diseases, with molecular size of 0.610 nm x 1.347 nm. The study has demonstrated that samples calcined for 4 and 5 h have displayed higher photocatalytic performance than Degussa P25, whereas the sample calcined for 3 h has shown comparable activity. (C) 2013 Published by Elsevier Ltd.",
journal = "Materials Research Bulletin",
title = "Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol",
volume = "48",
number = "4",
pages = "1363-1371",
doi = "10.1016/j.materresbull.2012.11.098"
}

Golubović, A. V., Abramović, B. F., Šćepanović, M., Grujić-Brojčin, M., Armaković, S. J., Veljkovic, I., Babić, B. M., Dohcevic-Mitrovic, Z.,& Popović, Z. V.. (2013). Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol. in Materials Research Bulletin, 48(4), 1363-1371.
https://doi.org/10.1016/j.materresbull.2012.11.098

Golubović AV, Abramović BF, Šćepanović M, Grujić-Brojčin M, Armaković SJ, Veljkovic I, Babić BM, Dohcevic-Mitrovic Z, Popović ZV. Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol. in Materials Research Bulletin. 2013;48(4):1363-1371.
doi:10.1016/j.materresbull.2012.11.098 .

Golubović, Aleksandar V., Abramović, Biljana F., Šćepanović, Maja, Grujić-Brojčin, Mirjana, Armaković, Sanja J., Veljkovic, I., Babić, Biljana M., Dohcevic-Mitrovic, Z., Popović, Zoran V., "Improved efficiency of sol-gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol" in Materials Research Bulletin, 48, no. 4 (2013):1363-1371,
https://doi.org/10.1016/j.materresbull.2012.11.098 . .

TY  - JOUR
AU  - Cekić, Božidar Đ.
AU  - Ivanovski, Valentin N.
AU  - Đorđević, Aleksandar N.
AU  - Aleksić, Velimir
AU  - Tomić, Zorica
AU  - Bogdanović, Stefan
AU  - Umićević, Ana
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4927
AB  - The paper addresses the issue of health risk associated with the presence of chrysotile in the soil type ranker formed on massive serpentines occurring in the area of Bubanj Potok, a settlement located in the southern Belgrade environs, Serbia. Characterization of the ranker soil was conducted by scanning electron microscopy, X-ray diffraction, micro-Raman spectroscopy and transmission Fe-57 Mossbauer spectroscopy. Scanning electron microscopy figures showed regular shaped smectite (montmorillonite) particles, aggregates of chlorite, and elongated sheets of serpentines minerals antigorite. X-ray diffraction analysis confirmed the presence of detrital mineral quartz polymorph as well as minor amounts of other mineral species. Micro-Raman spectroscopy identified the presence of dominant minerals, such as montmorillonite, kaolinite, muscovite, gypsum, calcite, albite, amphiboles (hornblende/kaersutite) and orthoclase. Important polymorph silica modifications of quartz, olivine (forsterite), pyroxene (enstatite/ferrosilite, diopside/hedenbergite), and serpentine (antigorite/lizardite/chrysotile) were identified.
T2  - Nuclear technology and radiation protection
T1  - Mineral Characterization of Soil Type Ranker Formed on Serpentines Occurring in Southern Belgrade Environs Bubanj Potok
VL  - 27
IS  - 2
SP  - 131
EP  - 136
DO  - 10.2298/NTRP1202131C
ER  - 

@article{
author = "Cekić, Božidar Đ. and Ivanovski, Valentin N. and Đorđević, Aleksandar N. and Aleksić, Velimir and Tomić, Zorica and Bogdanović, Stefan and Umićević, Ana",
year = "2012",
abstract = "The paper addresses the issue of health risk associated with the presence of chrysotile in the soil type ranker formed on massive serpentines occurring in the area of Bubanj Potok, a settlement located in the southern Belgrade environs, Serbia. Characterization of the ranker soil was conducted by scanning electron microscopy, X-ray diffraction, micro-Raman spectroscopy and transmission Fe-57 Mossbauer spectroscopy. Scanning electron microscopy figures showed regular shaped smectite (montmorillonite) particles, aggregates of chlorite, and elongated sheets of serpentines minerals antigorite. X-ray diffraction analysis confirmed the presence of detrital mineral quartz polymorph as well as minor amounts of other mineral species. Micro-Raman spectroscopy identified the presence of dominant minerals, such as montmorillonite, kaolinite, muscovite, gypsum, calcite, albite, amphiboles (hornblende/kaersutite) and orthoclase. Important polymorph silica modifications of quartz, olivine (forsterite), pyroxene (enstatite/ferrosilite, diopside/hedenbergite), and serpentine (antigorite/lizardite/chrysotile) were identified.",
journal = "Nuclear technology and radiation protection",
title = "Mineral Characterization of Soil Type Ranker Formed on Serpentines Occurring in Southern Belgrade Environs Bubanj Potok",
volume = "27",
number = "2",
pages = "131-136",
doi = "10.2298/NTRP1202131C"
}

Cekić, B. Đ., Ivanovski, V. N., Đorđević, A. N., Aleksić, V., Tomić, Z., Bogdanović, S.,& Umićević, A.. (2012). Mineral Characterization of Soil Type Ranker Formed on Serpentines Occurring in Southern Belgrade Environs Bubanj Potok. in Nuclear technology and radiation protection, 27(2), 131-136.
https://doi.org/10.2298/NTRP1202131C

Cekić BĐ, Ivanovski VN, Đorđević AN, Aleksić V, Tomić Z, Bogdanović S, Umićević A. Mineral Characterization of Soil Type Ranker Formed on Serpentines Occurring in Southern Belgrade Environs Bubanj Potok. in Nuclear technology and radiation protection. 2012;27(2):131-136.
doi:10.2298/NTRP1202131C .

Cekić, Božidar Đ., Ivanovski, Valentin N., Đorđević, Aleksandar N., Aleksić, Velimir, Tomić, Zorica, Bogdanović, Stefan, Umićević, Ana, "Mineral Characterization of Soil Type Ranker Formed on Serpentines Occurring in Southern Belgrade Environs Bubanj Potok" in Nuclear technology and radiation protection, 27, no. 2 (2012):131-136,
https://doi.org/10.2298/NTRP1202131C . .

TY  - JOUR
AU  - Paunović, Novica M.
AU  - Dohčević-Mitrović, Zorana 
AU  - Scurtu, Rares
AU  - Aškrabić, Sonja
AU  - Prekajski, Marija D.
AU  - Matović, Branko
AU  - Popović, Zoran V.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4992
AB  - Ce1-xPrxO2-delta (0 LT = x LT = 0.4) nanocrystals were synthesized by self-propagating method and thoroughly characterized using X-ray diffraction, Raman and X-ray photoelectron spectroscopy and magnetic measurements. Undoped CeO2 nanocrystals exhibited intrinsic ferromagnetism at room temperature. Despite the increased concentration of oxygen vacancies in doped samples, our results showed that ferromagnetic ordering rapidly degrades with Pr doping. The suppression of ferromagnetism can be explained in terms of the different dopant valence state, the different nature of the vacancies formed in Pr-doped samples and their ability/disability to establish the ferromagnetic ordering.
T2  - Nanoscale
T1  - Suppression of inherent ferromagnetism in Pr-doped CeO2 nanocrystals
VL  - 4
IS  - 17
SP  - 5469
EP  - 5476
DO  - 10.1039/c2nr30799e
ER  - 

@article{
author = "Paunović, Novica M. and Dohčević-Mitrović, Zorana  and Scurtu, Rares and Aškrabić, Sonja and Prekajski, Marija D. and Matović, Branko and Popović, Zoran V.",
year = "2012",
abstract = "Ce1-xPrxO2-delta (0 LT = x LT = 0.4) nanocrystals were synthesized by self-propagating method and thoroughly characterized using X-ray diffraction, Raman and X-ray photoelectron spectroscopy and magnetic measurements. Undoped CeO2 nanocrystals exhibited intrinsic ferromagnetism at room temperature. Despite the increased concentration of oxygen vacancies in doped samples, our results showed that ferromagnetic ordering rapidly degrades with Pr doping. The suppression of ferromagnetism can be explained in terms of the different dopant valence state, the different nature of the vacancies formed in Pr-doped samples and their ability/disability to establish the ferromagnetic ordering.",
journal = "Nanoscale",
title = "Suppression of inherent ferromagnetism in Pr-doped CeO2 nanocrystals",
volume = "4",
number = "17",
pages = "5469-5476",
doi = "10.1039/c2nr30799e"
}

Paunović, N. M., Dohčević-Mitrović, Z., Scurtu, R., Aškrabić, S., Prekajski, M. D., Matović, B.,& Popović, Z. V.. (2012). Suppression of inherent ferromagnetism in Pr-doped CeO2 nanocrystals. in Nanoscale, 4(17), 5469-5476.
https://doi.org/10.1039/c2nr30799e

Paunović NM, Dohčević-Mitrović Z, Scurtu R, Aškrabić S, Prekajski MD, Matović B, Popović ZV. Suppression of inherent ferromagnetism in Pr-doped CeO2 nanocrystals. in Nanoscale. 2012;4(17):5469-5476.
doi:10.1039/c2nr30799e .

Paunović, Novica M., Dohčević-Mitrović, Zorana , Scurtu, Rares, Aškrabić, Sonja, Prekajski, Marija D., Matović, Branko, Popović, Zoran V., "Suppression of inherent ferromagnetism in Pr-doped CeO2 nanocrystals" in Nanoscale, 4, no. 17 (2012):5469-5476,
https://doi.org/10.1039/c2nr30799e . .

TY  - JOUR
AU  - Askrabic, S.
AU  - Dohcevic-Mitrovic, Z.
AU  - Kremenović, Aleksandar S.
AU  - Lazarević, Nataša
AU  - Kahlenberg, V.
AU  - Popović, Zoran V.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4661
AB  - Nanocrystalline ceria (CeO2) is known for its ionic conductivity and oxygen storage properties, which depend on the presence of oxygen ion vacancies. The vacancies cause several important changes in CeO2 involving microstrain, electronic structure, magnetic properties, etc. In this article, we focus our attention to the microstructural changes of nanocrystalline CeO2-x annealed at different temperatures in the range 200500 degrees C. Structural and vibrational properties were investigated by X-ray diffraction and Raman spectroscopy. It was observed that the content of oxygen vacancies changed significantly with increasing annealing temperature, which plays an important role in the observed microstructural changes of the annealed samples. We demonstrate that the observed microstrain changes, because of variable defect content, dominate over the crystallite size effect. This finding is opposite to the conclusions made by several other authors. A new mode, classified as a probable surface mode, was observed in the Raman spectra at similar to 480 cm(1), the appearance of which can be explained by the large defective structure and disorder in the ceria lattice. Copyright (c) 2011 John Wiley and Sons, Ltd.
T2  - Journal of Raman Spectroscopy
T1  - Oxygen vacancy-induced microstructural changes of annealed CeO2-x nanocrystals
VL  - 43
IS  - 1
SP  - 76
EP  - 81
DO  - 10.1002/jrs.2987
ER  - 

@article{
author = "Askrabic, S. and Dohcevic-Mitrovic, Z. and Kremenović, Aleksandar S. and Lazarević, Nataša and Kahlenberg, V. and Popović, Zoran V.",
year = "2012",
abstract = "Nanocrystalline ceria (CeO2) is known for its ionic conductivity and oxygen storage properties, which depend on the presence of oxygen ion vacancies. The vacancies cause several important changes in CeO2 involving microstrain, electronic structure, magnetic properties, etc. In this article, we focus our attention to the microstructural changes of nanocrystalline CeO2-x annealed at different temperatures in the range 200500 degrees C. Structural and vibrational properties were investigated by X-ray diffraction and Raman spectroscopy. It was observed that the content of oxygen vacancies changed significantly with increasing annealing temperature, which plays an important role in the observed microstructural changes of the annealed samples. We demonstrate that the observed microstrain changes, because of variable defect content, dominate over the crystallite size effect. This finding is opposite to the conclusions made by several other authors. A new mode, classified as a probable surface mode, was observed in the Raman spectra at similar to 480 cm(1), the appearance of which can be explained by the large defective structure and disorder in the ceria lattice. Copyright (c) 2011 John Wiley and Sons, Ltd.",
journal = "Journal of Raman Spectroscopy",
title = "Oxygen vacancy-induced microstructural changes of annealed CeO2-x nanocrystals",
volume = "43",
number = "1",
pages = "76-81",
doi = "10.1002/jrs.2987"
}

Askrabic, S., Dohcevic-Mitrovic, Z., Kremenović, A. S., Lazarević, N., Kahlenberg, V.,& Popović, Z. V.. (2012). Oxygen vacancy-induced microstructural changes of annealed CeO2-x nanocrystals. in Journal of Raman Spectroscopy, 43(1), 76-81.
https://doi.org/10.1002/jrs.2987

Askrabic S, Dohcevic-Mitrovic Z, Kremenović AS, Lazarević N, Kahlenberg V, Popović ZV. Oxygen vacancy-induced microstructural changes of annealed CeO2-x nanocrystals. in Journal of Raman Spectroscopy. 2012;43(1):76-81.
doi:10.1002/jrs.2987 .

Askrabic, S., Dohcevic-Mitrovic, Z., Kremenović, Aleksandar S., Lazarević, Nataša, Kahlenberg, V., Popović, Zoran V., "Oxygen vacancy-induced microstructural changes of annealed CeO2-x nanocrystals" in Journal of Raman Spectroscopy, 43, no. 1 (2012):76-81,
https://doi.org/10.1002/jrs.2987 . .

TY  - JOUR
AU  - Šćepanović, Maja
AU  - Abramović, Biljana F.
AU  - Golubović, Aleksandar V.
AU  - Kler, Sanja
AU  - Grujić-Brojčin, Mirjana
AU  - Dohčević-Mitrović, Zorana 
AU  - Babić, Biljana M.
AU  - Matović, Branko
AU  - Popović, Zoran V.
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4656
AB  - Nanocrystalline titanium dioxide (TiO2) powders have been synthesized by sol-gel method using titanium tetrachloride (TiCl4) or tetrabutyl titanate (Ti(OC4H9)(4) as precursors, different alcohols and calcination temperatures in the range from 400 to 650 A degrees C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective beta-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO2 powders prepared from TiCl4 and amyl-alcohol, calcined at 550 A degrees C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 A degrees C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO2 nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.
T2  - Journal of Sol-gel Science and Technology
T1  - Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route
VL  - 61
IS  - 2
SP  - 390
EP  - 402
DO  - 10.1007/s10971-011-2639-9
ER  - 

@article{
author = "Šćepanović, Maja and Abramović, Biljana F. and Golubović, Aleksandar V. and Kler, Sanja and Grujić-Brojčin, Mirjana and Dohčević-Mitrović, Zorana  and Babić, Biljana M. and Matović, Branko and Popović, Zoran V.",
year = "2012",
abstract = "Nanocrystalline titanium dioxide (TiO2) powders have been synthesized by sol-gel method using titanium tetrachloride (TiCl4) or tetrabutyl titanate (Ti(OC4H9)(4) as precursors, different alcohols and calcination temperatures in the range from 400 to 650 A degrees C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective beta-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO2 powders prepared from TiCl4 and amyl-alcohol, calcined at 550 A degrees C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 A degrees C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO2 nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.",
journal = "Journal of Sol-gel Science and Technology",
title = "Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route",
volume = "61",
number = "2",
pages = "390-402",
doi = "10.1007/s10971-011-2639-9"
}

Šćepanović, M., Abramović, B. F., Golubović, A. V., Kler, S., Grujić-Brojčin, M., Dohčević-Mitrović, Z., Babić, B. M., Matović, B.,& Popović, Z. V.. (2012). Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route. in Journal of Sol-gel Science and Technology, 61(2), 390-402.
https://doi.org/10.1007/s10971-011-2639-9

Šćepanović M, Abramović BF, Golubović AV, Kler S, Grujić-Brojčin M, Dohčević-Mitrović Z, Babić BM, Matović B, Popović ZV. Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route. in Journal of Sol-gel Science and Technology. 2012;61(2):390-402.
doi:10.1007/s10971-011-2639-9 .

Šćepanović, Maja, Abramović, Biljana F., Golubović, Aleksandar V., Kler, Sanja, Grujić-Brojčin, Mirjana, Dohčević-Mitrović, Zorana , Babić, Biljana M., Matović, Branko, Popović, Zoran V., "Photocatalytic degradation of metoprolol in water suspension of TiO2 nanopowders prepared using sol-gel route" in Journal of Sol-gel Science and Technology, 61, no. 2 (2012):390-402,
https://doi.org/10.1007/s10971-011-2639-9 . .

TY  - JOUR
AU  - Dohcevic-Mitrovic, Z.
AU  - Golubović, Aleksandar V.
AU  - Radović, Marko B.
AU  - Fruth, V.
AU  - Kremenović, Aleksandar S.
AU  - Meden, A.
AU  - Babić, Biljana M.
AU  - Šćepanović, Maja
AU  - Popović, Zoran V.
PY  - 2011
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/4421
AB  - Ultrafine porous cerium dioxide nanopowders were synthesized by relatively new and cost-effective hydrothermal method varying the main synthesis parameters, temperature of calcination and type of basic solution. Characterization of the as-produced powders was performed by X-ray diffraction (XRD), atomic force microscopy (AFM), Raman scattering and Brunauer-Emmett-Teller (BET) method. This study reveals that difference in synthesis parameters has strong influence on the particle size, surface area, and pore size distribution enabling the more precise control of material properties very important for catalytic and nanosensor applications. (C) 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim
T2  - Physica Status Solidi. A: Applications and Materials Science
T1  - Mesoporous CeO2 nanopowders with different particle sizes
VL  - 208
IS  - 6
SP  - 1399
EP  - 1402
DO  - 10.1002/pssa.201000355
ER  - 

@article{
author = "Dohcevic-Mitrovic, Z. and Golubović, Aleksandar V. and Radović, Marko B. and Fruth, V. and Kremenović, Aleksandar S. and Meden, A. and Babić, Biljana M. and Šćepanović, Maja and Popović, Zoran V.",
year = "2011",
abstract = "Ultrafine porous cerium dioxide nanopowders were synthesized by relatively new and cost-effective hydrothermal method varying the main synthesis parameters, temperature of calcination and type of basic solution. Characterization of the as-produced powders was performed by X-ray diffraction (XRD), atomic force microscopy (AFM), Raman scattering and Brunauer-Emmett-Teller (BET) method. This study reveals that difference in synthesis parameters has strong influence on the particle size, surface area, and pore size distribution enabling the more precise control of material properties very important for catalytic and nanosensor applications. (C) 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim",
journal = "Physica Status Solidi. A: Applications and Materials Science",
title = "Mesoporous CeO2 nanopowders with different particle sizes",
volume = "208",
number = "6",
pages = "1399-1402",
doi = "10.1002/pssa.201000355"
}

Dohcevic-Mitrovic, Z., Golubović, A. V., Radović, M. B., Fruth, V., Kremenović, A. S., Meden, A., Babić, B. M., Šćepanović, M.,& Popović, Z. V.. (2011). Mesoporous CeO2 nanopowders with different particle sizes. in Physica Status Solidi. A: Applications and Materials Science, 208(6), 1399-1402.
https://doi.org/10.1002/pssa.201000355

Dohcevic-Mitrovic Z, Golubović AV, Radović MB, Fruth V, Kremenović AS, Meden A, Babić BM, Šćepanović M, Popović ZV. Mesoporous CeO2 nanopowders with different particle sizes. in Physica Status Solidi. A: Applications and Materials Science. 2011;208(6):1399-1402.
doi:10.1002/pssa.201000355 .

Dohcevic-Mitrovic, Z., Golubović, Aleksandar V., Radović, Marko B., Fruth, V., Kremenović, Aleksandar S., Meden, A., Babić, Biljana M., Šćepanović, Maja, Popović, Zoran V., "Mesoporous CeO2 nanopowders with different particle sizes" in Physica Status Solidi. A: Applications and Materials Science, 208, no. 6 (2011):1399-1402,
https://doi.org/10.1002/pssa.201000355 . .