Marinković, A., Tomić, N., Vuksanović, M. M., Kovačina, J., Marunkić, D., Milošević, M.,& Perendija, J.. (2020). Razvoj novih antikorozivnih organo-metalnih jedinjenja na bazi Cerijuma za primenu u alkidnim premazima. in Univerzitet u Beogradu : Tehnološko-metalurški fakultet.
https://hdl.handle.net/21.15107/rcub_vinar_13002

Marinković A, Tomić N, Vuksanović MM, Kovačina J, Marunkić D, Milošević M, Perendija J. Razvoj novih antikorozivnih organo-metalnih jedinjenja na bazi Cerijuma za primenu u alkidnim premazima. in Univerzitet u Beogradu : Tehnološko-metalurški fakultet. 2020;.
https://hdl.handle.net/21.15107/rcub_vinar_13002 .

Marinković, Aleksandar, Tomić, Nataša, Vuksanović, Marija M., Kovačina, Jovanka, Marunkić, Dunja, Milošević, Milena, Perendija, Jovana, "Razvoj novih antikorozivnih organo-metalnih jedinjenja na bazi Cerijuma za primenu u alkidnim premazima" in Univerzitet u Beogradu : Tehnološko-metalurški fakultet (2020),
https://hdl.handle.net/21.15107/rcub_vinar_13002 .

TY  - JOUR
AU  - Manić, Nebojša G.
AU  - Janković, Bojan Ž.
AU  - Pijović, Milena
AU  - Waisi, Hadi
AU  - Dodevski, Vladimir
AU  - Stojiljković, Dragoslava
AU  - Jovanović, Vladimir V.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8904
AB  - In order to clarify relationship between apricot kernel shell biomass slow pyrolysis mechanism and its main constituents (viz. hemicelluloses, cellulose and lignin), the reactivity effects of main constituents on pyrolysis characteristics were determined by the non-isothermal simultaneous thermal analysis. It was found that four-step (parallel) reaction model is suitable for studying the slow pyrolysis process, within the semi-global model which excludes the strong interaction between biomass constituents (pseudo-components). The application of the proposed model was allowed by the results obtained from KAS iterative isoconversional (model-free) approach. The valorization of the model was confirmed by the process optimization. The complex (cumulative) apricot kernel shell pyrolysis rate curves at different heating rates are successfully resolved into the individual decomposition rate curves (arising from thermal conversion of hemicelluloses, cellulose, and primary/secondary lignin fragments) by four-parameter Fraser–Suzuki function. Besides hemicelluloses and cellulose pyrolyses, the proposed model distinguishes primary and secondary lignin reactions, which enhance the gaseous products releasing (primarily CO and CO2 gases) and charification of the solid residue (increased the bio-char yield). © 2020, Akadémiai Kiadó, Budapest, Hungary.
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Apricot kernel shells pyrolysis controlled by non-isothermal simultaneous thermal analysis (STA)
VL  - 142
IS  - 2
SP  - 565
EP  - 579
DO  - 10.1007/s10973-020-09307-5
ER  - 

@article{
author = "Manić, Nebojša G. and Janković, Bojan Ž. and Pijović, Milena and Waisi, Hadi and Dodevski, Vladimir and Stojiljković, Dragoslava and Jovanović, Vladimir V.",
year = "2020",
abstract = "In order to clarify relationship between apricot kernel shell biomass slow pyrolysis mechanism and its main constituents (viz. hemicelluloses, cellulose and lignin), the reactivity effects of main constituents on pyrolysis characteristics were determined by the non-isothermal simultaneous thermal analysis. It was found that four-step (parallel) reaction model is suitable for studying the slow pyrolysis process, within the semi-global model which excludes the strong interaction between biomass constituents (pseudo-components). The application of the proposed model was allowed by the results obtained from KAS iterative isoconversional (model-free) approach. The valorization of the model was confirmed by the process optimization. The complex (cumulative) apricot kernel shell pyrolysis rate curves at different heating rates are successfully resolved into the individual decomposition rate curves (arising from thermal conversion of hemicelluloses, cellulose, and primary/secondary lignin fragments) by four-parameter Fraser–Suzuki function. Besides hemicelluloses and cellulose pyrolyses, the proposed model distinguishes primary and secondary lignin reactions, which enhance the gaseous products releasing (primarily CO and CO2 gases) and charification of the solid residue (increased the bio-char yield). © 2020, Akadémiai Kiadó, Budapest, Hungary.",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Apricot kernel shells pyrolysis controlled by non-isothermal simultaneous thermal analysis (STA)",
volume = "142",
number = "2",
pages = "565-579",
doi = "10.1007/s10973-020-09307-5"
}

Manić, N. G., Janković, B. Ž., Pijović, M., Waisi, H., Dodevski, V., Stojiljković, D.,& Jovanović, V. V.. (2020). Apricot kernel shells pyrolysis controlled by non-isothermal simultaneous thermal analysis (STA). in Journal of Thermal Analysis and Calorimetry, 142(2), 565-579.
https://doi.org/10.1007/s10973-020-09307-5

Manić NG, Janković BŽ, Pijović M, Waisi H, Dodevski V, Stojiljković D, Jovanović VV. Apricot kernel shells pyrolysis controlled by non-isothermal simultaneous thermal analysis (STA). in Journal of Thermal Analysis and Calorimetry. 2020;142(2):565-579.
doi:10.1007/s10973-020-09307-5 .

Manić, Nebojša G., Janković, Bojan Ž., Pijović, Milena, Waisi, Hadi, Dodevski, Vladimir, Stojiljković, Dragoslava, Jovanović, Vladimir V., "Apricot kernel shells pyrolysis controlled by non-isothermal simultaneous thermal analysis (STA)" in Journal of Thermal Analysis and Calorimetry, 142, no. 2 (2020):565-579,
https://doi.org/10.1007/s10973-020-09307-5 . .

TY  - JOUR
AU  - Radmanović, Svjetlana B.
AU  - Gajić-Kvaščev, Maja 
AU  - Mrvić, Vesna
AU  - Đorđević, Aleksandar
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9755
AB  - According to the Serbian official soil classification system, Rendzina is a soil type with an A-AC-C-R profile, developed on parent rock containing more than 20% of calcareous material (except soils with an A-R profile on hard pure limestone or dolomite). Previous investigations have shown that 29 Rendzina soil profiles from Serbia belong to the reference soil groups (RSGs) of Leptosols, Regosols and Phaeozems according to the World Reference Base for Soil Resources (WRB 2015). The present study addresses the correlations among three WRB RSGs in terms of soil texture, mean weight diameter (MWD), total N content, and humus fractional composition using Principal Component Analysis (PCA). The objective is to better understand the mutual relationship between the classification soil units used in Serbia and the international WRB system. The results show that PCA cannot unequivocally distinguish between these three RSGs. Leptosols and Regosols are highly incoherent groups while the group of Phaeozems is highly coherent, leading to the conclusion that the physical and chemical properties of the soil profiles of Phaoeozems are specific. It is obvious that soil depth and color, which are the overriding factors in the differentiation of Rendzina soils into three WRB RSGs, had no significant effect on these properties. The results further show that soil properties such as texture, MWD, humus fractional composition, etc. cannot be used to correlate Rendzina soils from Serbia with WRB. Instead, careful correlation of individual soil profiles is needed based on quantitative soil data analysis as required by WRB.
T2  - Journal of Agricultural Sciences (Belgrade)
T1  - Characteristics of Rendzina soils in Serbia and their WRB classification
VL  - 65
IS  - 3
SP  - 251
EP  - 261
DO  - 10.2298/JAS2003251R
ER  - 

@article{
author = "Radmanović, Svjetlana B. and Gajić-Kvaščev, Maja  and Mrvić, Vesna and Đorđević, Aleksandar",
year = "2020",
abstract = "According to the Serbian official soil classification system, Rendzina is a soil type with an A-AC-C-R profile, developed on parent rock containing more than 20% of calcareous material (except soils with an A-R profile on hard pure limestone or dolomite). Previous investigations have shown that 29 Rendzina soil profiles from Serbia belong to the reference soil groups (RSGs) of Leptosols, Regosols and Phaeozems according to the World Reference Base for Soil Resources (WRB 2015). The present study addresses the correlations among three WRB RSGs in terms of soil texture, mean weight diameter (MWD), total N content, and humus fractional composition using Principal Component Analysis (PCA). The objective is to better understand the mutual relationship between the classification soil units used in Serbia and the international WRB system. The results show that PCA cannot unequivocally distinguish between these three RSGs. Leptosols and Regosols are highly incoherent groups while the group of Phaeozems is highly coherent, leading to the conclusion that the physical and chemical properties of the soil profiles of Phaoeozems are specific. It is obvious that soil depth and color, which are the overriding factors in the differentiation of Rendzina soils into three WRB RSGs, had no significant effect on these properties. The results further show that soil properties such as texture, MWD, humus fractional composition, etc. cannot be used to correlate Rendzina soils from Serbia with WRB. Instead, careful correlation of individual soil profiles is needed based on quantitative soil data analysis as required by WRB.",
journal = "Journal of Agricultural Sciences (Belgrade)",
title = "Characteristics of Rendzina soils in Serbia and their WRB classification",
volume = "65",
number = "3",
pages = "251-261",
doi = "10.2298/JAS2003251R"
}

Radmanović, S. B., Gajić-Kvaščev, M., Mrvić, V.,& Đorđević, A.. (2020). Characteristics of Rendzina soils in Serbia and their WRB classification. in Journal of Agricultural Sciences (Belgrade), 65(3), 251-261.
https://doi.org/10.2298/JAS2003251R

Radmanović SB, Gajić-Kvaščev M, Mrvić V, Đorđević A. Characteristics of Rendzina soils in Serbia and their WRB classification. in Journal of Agricultural Sciences (Belgrade). 2020;65(3):251-261.
doi:10.2298/JAS2003251R .

Radmanović, Svjetlana B., Gajić-Kvaščev, Maja , Mrvić, Vesna, Đorđević, Aleksandar, "Characteristics of Rendzina soils in Serbia and their WRB classification" in Journal of Agricultural Sciences (Belgrade), 65, no. 3 (2020):251-261,
https://doi.org/10.2298/JAS2003251R . .

TY  - JOUR
AU  - Kokunešoski, Maja
AU  - Stanković, Miroslav
AU  - Vuković, Marina
AU  - Majstorović, Jelena
AU  - Šaponjić, Đorđe
AU  - Ilić, Svetlana
AU  - Šaponjić, Aleksandra
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9790
AB  - Macroporous silica ceramic was obtained using clay and diatomite. Boric acid as a low-cost additive in the amount of 1 wt% was used. These porous materials were obtained at low forming pressure (40-80 MPa) and lower sintering temperature (850-1300 ºC) for 4h in air. The influence of boric acid, forming pressure, and sintering temperature on the microstructure, porosity parameters, and mechanical properties of obtained porous monoliths were investigated. As-received and the modified samples were characterized by X-ray diffraction, FTIR, SEM, and mercury porosimetry measurements. As for modified clay and diatomite, they were pressed at 60 MPa and then sintered at 1150 ºC, obtaining porosities of about 10 % and 60 %, respectively. Both of the analyzed samples had the pore diameter in the range of macroporous materials. The pore diameters of clay samples are ranging from 0.1-10 μm, whereas the pore diameter of diatomite samples was slightly lower with values ranging from 0.05-5 μm. Modified diatomite samples have a lower Young modulus in comparison to modified clay samples.
T2  - Science of Sintering
T1  - Macroporous monoliths based оn natural mineral sources, clay аnd diatomite
VL  - 52
IS  - 3
SP  - 339
EP  - 348
DO  - 10.2298/SOS2003339K
ER  - 

@article{
author = "Kokunešoski, Maja and Stanković, Miroslav and Vuković, Marina and Majstorović, Jelena and Šaponjić, Đorđe and Ilić, Svetlana and Šaponjić, Aleksandra",
year = "2020",
abstract = "Macroporous silica ceramic was obtained using clay and diatomite. Boric acid as a low-cost additive in the amount of 1 wt% was used. These porous materials were obtained at low forming pressure (40-80 MPa) and lower sintering temperature (850-1300 ºC) for 4h in air. The influence of boric acid, forming pressure, and sintering temperature on the microstructure, porosity parameters, and mechanical properties of obtained porous monoliths were investigated. As-received and the modified samples were characterized by X-ray diffraction, FTIR, SEM, and mercury porosimetry measurements. As for modified clay and diatomite, they were pressed at 60 MPa and then sintered at 1150 ºC, obtaining porosities of about 10 % and 60 %, respectively. Both of the analyzed samples had the pore diameter in the range of macroporous materials. The pore diameters of clay samples are ranging from 0.1-10 μm, whereas the pore diameter of diatomite samples was slightly lower with values ranging from 0.05-5 μm. Modified diatomite samples have a lower Young modulus in comparison to modified clay samples.",
journal = "Science of Sintering",
title = "Macroporous monoliths based оn natural mineral sources, clay аnd diatomite",
volume = "52",
number = "3",
pages = "339-348",
doi = "10.2298/SOS2003339K"
}

Kokunešoski, M., Stanković, M., Vuković, M., Majstorović, J., Šaponjić, Đ., Ilić, S.,& Šaponjić, A.. (2020). Macroporous monoliths based оn natural mineral sources, clay аnd diatomite. in Science of Sintering, 52(3), 339-348.
https://doi.org/10.2298/SOS2003339K

Kokunešoski M, Stanković M, Vuković M, Majstorović J, Šaponjić Đ, Ilić S, Šaponjić A. Macroporous monoliths based оn natural mineral sources, clay аnd diatomite. in Science of Sintering. 2020;52(3):339-348.
doi:10.2298/SOS2003339K .

Kokunešoski, Maja, Stanković, Miroslav, Vuković, Marina, Majstorović, Jelena, Šaponjić, Đorđe, Ilić, Svetlana, Šaponjić, Aleksandra, "Macroporous monoliths based оn natural mineral sources, clay аnd diatomite" in Science of Sintering, 52, no. 3 (2020):339-348,
https://doi.org/10.2298/SOS2003339K . .

TY  - JOUR
AU  - Milutinović, Slobodan
AU  - Vujisić, Miloš Lj.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9740
AB  - The purpose of this study is to investigate and quantify the influence of nanoparticle composition, size, and concentration on the difference between dose enhancement values derived from Monte Carlo simulations with homogeneous and structured geometrical representations of the target region in metal nanoparticle-enhanced photon brachytherapy. Values of the dose enhancement factor (DEF) were calculated for Pd-103, I-125, and Cs-131 brachytherapy sources with gold, silver, or platinum nanoparticles acting as targeting agents. Simulations were performed using the Geant4 toolkit with condensed history models of electron transport. Stringent limits were imposed on adjustable parameters that define secondary electron histories, so that simulations came closest to true event-by-event electron tracking, thereby allowing part of the nanoparticle-laden volume used for calculating the dose to be represented as a structured region with uniformly distributed discrete nanoparticles. Fine-tuned physical models of secondary radiation emission and propagation, along with the discrete geometrical representation of nanoparticles, result in a more realistic assessment of dose enhancement. The DEF correction coefficient is introduced as a metric that quantifies the absorption of secondary radiation inside the nanoparticles themselves, a phenomenon disregarded when the target region is treated as a homogeneous metal–tissue mixture, but accounted for by discrete nanoparticle representation. The approach applied to correcting DEF values both draws from and expands upon several related investigations published previously. Comparison of the obtained results to those found in relevant references shows both agreement and deviation, depending on nanoparticle properties and photon energy. © 2020, China Science Publishing & Media Ltd. (Science Press), Shanghai Institute of Applied Physics, the Chinese Academy of Sciences, Chinese Nuclear Society and Springer Nature Singapore Pte Ltd.
T2  - Nuclear Science and Techniques
T1  - Simulation-based correction of dose enhancement factor values in photon brachytherapy with metal nanoparticle targeting
VL  - 31
IS  - 11
DO  - 10.1007/s41365-020-00820-8
ER  - 

@article{
author = "Milutinović, Slobodan and Vujisić, Miloš Lj.",
year = "2020",
abstract = "The purpose of this study is to investigate and quantify the influence of nanoparticle composition, size, and concentration on the difference between dose enhancement values derived from Monte Carlo simulations with homogeneous and structured geometrical representations of the target region in metal nanoparticle-enhanced photon brachytherapy. Values of the dose enhancement factor (DEF) were calculated for Pd-103, I-125, and Cs-131 brachytherapy sources with gold, silver, or platinum nanoparticles acting as targeting agents. Simulations were performed using the Geant4 toolkit with condensed history models of electron transport. Stringent limits were imposed on adjustable parameters that define secondary electron histories, so that simulations came closest to true event-by-event electron tracking, thereby allowing part of the nanoparticle-laden volume used for calculating the dose to be represented as a structured region with uniformly distributed discrete nanoparticles. Fine-tuned physical models of secondary radiation emission and propagation, along with the discrete geometrical representation of nanoparticles, result in a more realistic assessment of dose enhancement. The DEF correction coefficient is introduced as a metric that quantifies the absorption of secondary radiation inside the nanoparticles themselves, a phenomenon disregarded when the target region is treated as a homogeneous metal–tissue mixture, but accounted for by discrete nanoparticle representation. The approach applied to correcting DEF values both draws from and expands upon several related investigations published previously. Comparison of the obtained results to those found in relevant references shows both agreement and deviation, depending on nanoparticle properties and photon energy. © 2020, China Science Publishing & Media Ltd. (Science Press), Shanghai Institute of Applied Physics, the Chinese Academy of Sciences, Chinese Nuclear Society and Springer Nature Singapore Pte Ltd.",
journal = "Nuclear Science and Techniques",
title = "Simulation-based correction of dose enhancement factor values in photon brachytherapy with metal nanoparticle targeting",
volume = "31",
number = "11",
doi = "10.1007/s41365-020-00820-8"
}

Milutinović, S.,& Vujisić, M. Lj.. (2020). Simulation-based correction of dose enhancement factor values in photon brachytherapy with metal nanoparticle targeting. in Nuclear Science and Techniques, 31(11).
https://doi.org/10.1007/s41365-020-00820-8

Milutinović S, Vujisić ML. Simulation-based correction of dose enhancement factor values in photon brachytherapy with metal nanoparticle targeting. in Nuclear Science and Techniques. 2020;31(11).
doi:10.1007/s41365-020-00820-8 .

Milutinović, Slobodan, Vujisić, Miloš Lj., "Simulation-based correction of dose enhancement factor values in photon brachytherapy with metal nanoparticle targeting" in Nuclear Science and Techniques, 31, no. 11 (2020),
https://doi.org/10.1007/s41365-020-00820-8 . .

TY  - JOUR
AU  - Savić, Branislava
AU  - Mihajlović, Ivana
AU  - Milutinović, Slobodan M.
AU  - Seović, Mina M.
AU  - Nikolić, Željka
AU  - Tošić, Miloš S.
AU  - Brdarić, Tanja
PY  - 2019
UR  - http://www.doiserbia.nb.rs/Article.aspx?ID=0352-51391800106S
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8199
AB  - Organic contaminants from building materials negatively affect the health of people. This study presents an analytical method for the simultaneous identification and quantification of 9 phenolic compounds, i.e., phenol, 2-chloro-phenol, 2,4-dimethylphenol, 2,4-dichlorophenol, 2,6-dichlorophenol, 4-chloro-3-methylphenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrahlorophenol and pentachlorophenol, in concrete by a gas chromatographic method with mass spectrometric detection (GC–MS). By comparing the MS spectra of the test compounds with MS spectra of analytical standards, reliable identification was achieved. The method could be applied in a given range (from 0.01 to 7.5 mg kg -1 ) with appropriate parameters of precision, accuracy, repeatability and linearity. The developed method could be used for quality control testing of phenols in concrete during the construction of new buildings, old residences and construction waste. The measurement uncertainty of the phenolic compounds in concrete was evaluated using two approaches, i.e., GUM recommendations and a Monte Carlo method. Disagreement of those methods was observed. The Monte Carlo method could be used in the evaluation of combined measurement uncertainty for the determination of phenolic compounds in concrete. © 2019 Serbian Chemical Society. All rights reserved.
T2  - Journal of the Serbian Chemical Society
T1  - Validation and uncertainty estimation of an analytical method for the determination of phenolic compounds in concrete
VL  - 84
IS  - 1
SP  - 55
EP  - 68
DO  - 10.2298/JSC180518106S
ER  - 

@article{
author = "Savić, Branislava and Mihajlović, Ivana and Milutinović, Slobodan M. and Seović, Mina M. and Nikolić, Željka and Tošić, Miloš S. and Brdarić, Tanja",
year = "2019",
abstract = "Organic contaminants from building materials negatively affect the health of people. This study presents an analytical method for the simultaneous identification and quantification of 9 phenolic compounds, i.e., phenol, 2-chloro-phenol, 2,4-dimethylphenol, 2,4-dichlorophenol, 2,6-dichlorophenol, 4-chloro-3-methylphenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrahlorophenol and pentachlorophenol, in concrete by a gas chromatographic method with mass spectrometric detection (GC–MS). By comparing the MS spectra of the test compounds with MS spectra of analytical standards, reliable identification was achieved. The method could be applied in a given range (from 0.01 to 7.5 mg kg -1 ) with appropriate parameters of precision, accuracy, repeatability and linearity. The developed method could be used for quality control testing of phenols in concrete during the construction of new buildings, old residences and construction waste. The measurement uncertainty of the phenolic compounds in concrete was evaluated using two approaches, i.e., GUM recommendations and a Monte Carlo method. Disagreement of those methods was observed. The Monte Carlo method could be used in the evaluation of combined measurement uncertainty for the determination of phenolic compounds in concrete. © 2019 Serbian Chemical Society. All rights reserved.",
journal = "Journal of the Serbian Chemical Society",
title = "Validation and uncertainty estimation of an analytical method for the determination of phenolic compounds in concrete",
volume = "84",
number = "1",
pages = "55-68",
doi = "10.2298/JSC180518106S"
}

Savić, B., Mihajlović, I., Milutinović, S. M., Seović, M. M., Nikolić, Ž., Tošić, M. S.,& Brdarić, T.. (2019). Validation and uncertainty estimation of an analytical method for the determination of phenolic compounds in concrete. in Journal of the Serbian Chemical Society, 84(1), 55-68.
https://doi.org/10.2298/JSC180518106S

Savić B, Mihajlović I, Milutinović SM, Seović MM, Nikolić Ž, Tošić MS, Brdarić T. Validation and uncertainty estimation of an analytical method for the determination of phenolic compounds in concrete. in Journal of the Serbian Chemical Society. 2019;84(1):55-68.
doi:10.2298/JSC180518106S .

Savić, Branislava, Mihajlović, Ivana, Milutinović, Slobodan M., Seović, Mina M., Nikolić, Željka, Tošić, Miloš S., Brdarić, Tanja, "Validation and uncertainty estimation of an analytical method for the determination of phenolic compounds in concrete" in Journal of the Serbian Chemical Society, 84, no. 1 (2019):55-68,
https://doi.org/10.2298/JSC180518106S . .

TY  - JOUR
AU  - Đurović, Sanja
AU  - Dragičević, Vesna
AU  - Waisi, Hadi
AU  - Pagnacco, Maja C.
AU  - Luković, Nevena
AU  - Knežević-Jugović, Zorica
AU  - Nikolić, Bogdan
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8679
AB  - Polyphenols present in different plant cell organelles increase the resistance of plants to various types of environmental stresses. We investigated the possibility of increasing the content of bioactive compounds in the seed of yellow soybean variety Laura. The soybean was treated during vegetation with five products based on plant extracts, on the assumption of enrichment of plants with various nutrients. Soybean flour extracts were screened spectrophotometrically for total phenolic content and antioxidant activity. The antioxidant activity was evaluated using three methods. The content of phenolic acids was determined by HPLC, and the raw protein content was estimated by the Kjeldahl method. Depending on the treatment, variations in the quantity of individual phenolic acids with up to 90% higher concentration as compared to the control were observed. Controlled usage of certain plant extracts can increase the concentration of the target group of bioactive compounds in the samples. The synergistic effect of proteins and phenolic compounds on the antioxidant activity of extracts was detected. The results of this study are not only important from the aspect of plant resistance to various types of stress, but also when considering soybean as a functional food. © 2019 by the Serbian Biological Society.
T2  - Archives of Biological Sciences
T1  - Enhancement of antioxidant activity and bioactive compound contents in yellow soybean by plant-extract-based products
VL  - 71
IS  - 3
SP  - 425
EP  - 434
DO  - 10.2298/ABS190123024D
ER  - 

@article{
author = "Đurović, Sanja and Dragičević, Vesna and Waisi, Hadi and Pagnacco, Maja C. and Luković, Nevena and Knežević-Jugović, Zorica and Nikolić, Bogdan",
year = "2019",
abstract = "Polyphenols present in different plant cell organelles increase the resistance of plants to various types of environmental stresses. We investigated the possibility of increasing the content of bioactive compounds in the seed of yellow soybean variety Laura. The soybean was treated during vegetation with five products based on plant extracts, on the assumption of enrichment of plants with various nutrients. Soybean flour extracts were screened spectrophotometrically for total phenolic content and antioxidant activity. The antioxidant activity was evaluated using three methods. The content of phenolic acids was determined by HPLC, and the raw protein content was estimated by the Kjeldahl method. Depending on the treatment, variations in the quantity of individual phenolic acids with up to 90% higher concentration as compared to the control were observed. Controlled usage of certain plant extracts can increase the concentration of the target group of bioactive compounds in the samples. The synergistic effect of proteins and phenolic compounds on the antioxidant activity of extracts was detected. The results of this study are not only important from the aspect of plant resistance to various types of stress, but also when considering soybean as a functional food. © 2019 by the Serbian Biological Society.",
journal = "Archives of Biological Sciences",
title = "Enhancement of antioxidant activity and bioactive compound contents in yellow soybean by plant-extract-based products",
volume = "71",
number = "3",
pages = "425-434",
doi = "10.2298/ABS190123024D"
}

Đurović, S., Dragičević, V., Waisi, H., Pagnacco, M. C., Luković, N., Knežević-Jugović, Z.,& Nikolić, B.. (2019). Enhancement of antioxidant activity and bioactive compound contents in yellow soybean by plant-extract-based products. in Archives of Biological Sciences, 71(3), 425-434.
https://doi.org/10.2298/ABS190123024D

Đurović S, Dragičević V, Waisi H, Pagnacco MC, Luković N, Knežević-Jugović Z, Nikolić B. Enhancement of antioxidant activity and bioactive compound contents in yellow soybean by plant-extract-based products. in Archives of Biological Sciences. 2019;71(3):425-434.
doi:10.2298/ABS190123024D .

Đurović, Sanja, Dragičević, Vesna, Waisi, Hadi, Pagnacco, Maja C., Luković, Nevena, Knežević-Jugović, Zorica, Nikolić, Bogdan, "Enhancement of antioxidant activity and bioactive compound contents in yellow soybean by plant-extract-based products" in Archives of Biological Sciences, 71, no. 3 (2019):425-434,
https://doi.org/10.2298/ABS190123024D . .

TY  - CONF
AU  - Savić, Branislava G.
AU  - Brdarić, Tanja
AU  - Mihajlović, Ivana
AU  - Milutinović, Slobodan
AU  - Pijović, Milena
AU  - Georgijević, Jelena M.
AU  - Tasić, Gvozden
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12800
AB  - The estimation of uncertainty measurement using different approaches is increasingly applied to assess the reliability of results generated by applied analytical methods. This paper presents the Monte Carlo simulation model (MCS) for calculating the uncertainty of the measurement associated with the result of the analysis. The results of MCS were compared with the commonly used a standard method (GUM). The calculations of the measurement uncertainty were demonstrated in the case of the determination of 2,4-dimethylphenol by gas chromatography in concrete samples.
PB  - Belgrade : Society of Physical Chemists of Serbia
C3  - PHYSICAL CHEMISTRY 2018 : 14th international conference on fundamental and applied aspects of physical chemistry : Proceedings
T1  - Monte Carlo simulation as an alternative approach for estimation of uncertainty measurement of 2,4 dimethylphenol
VL  - 2
SP  - 785
EP  - 788
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12800
ER  - 

@conference{
author = "Savić, Branislava G. and Brdarić, Tanja and Mihajlović, Ivana and Milutinović, Slobodan and Pijović, Milena and Georgijević, Jelena M. and Tasić, Gvozden",
year = "2018",
abstract = "The estimation of uncertainty measurement using different approaches is increasingly applied to assess the reliability of results generated by applied analytical methods. This paper presents the Monte Carlo simulation model (MCS) for calculating the uncertainty of the measurement associated with the result of the analysis. The results of MCS were compared with the commonly used a standard method (GUM). The calculations of the measurement uncertainty were demonstrated in the case of the determination of 2,4-dimethylphenol by gas chromatography in concrete samples.",
publisher = "Belgrade : Society of Physical Chemists of Serbia",
journal = "PHYSICAL CHEMISTRY 2018 : 14th international conference on fundamental and applied aspects of physical chemistry : Proceedings",
title = "Monte Carlo simulation as an alternative approach for estimation of uncertainty measurement of 2,4 dimethylphenol",
volume = "2",
pages = "785-788",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12800"
}

Savić, B. G., Brdarić, T., Mihajlović, I., Milutinović, S., Pijović, M., Georgijević, J. M.,& Tasić, G.. (2018). Monte Carlo simulation as an alternative approach for estimation of uncertainty measurement of 2,4 dimethylphenol. in PHYSICAL CHEMISTRY 2018 : 14th international conference on fundamental and applied aspects of physical chemistry : Proceedings
Belgrade : Society of Physical Chemists of Serbia., 2, 785-788.
https://hdl.handle.net/21.15107/rcub_vinar_12800

Savić BG, Brdarić T, Mihajlović I, Milutinović S, Pijović M, Georgijević JM, Tasić G. Monte Carlo simulation as an alternative approach for estimation of uncertainty measurement of 2,4 dimethylphenol. in PHYSICAL CHEMISTRY 2018 : 14th international conference on fundamental and applied aspects of physical chemistry : Proceedings. 2018;2:785-788.
https://hdl.handle.net/21.15107/rcub_vinar_12800 .

Savić, Branislava G., Brdarić, Tanja, Mihajlović, Ivana, Milutinović, Slobodan, Pijović, Milena, Georgijević, Jelena M., Tasić, Gvozden, "Monte Carlo simulation as an alternative approach for estimation of uncertainty measurement of 2,4 dimethylphenol" in PHYSICAL CHEMISTRY 2018 : 14th international conference on fundamental and applied aspects of physical chemistry : Proceedings, 2 (2018):785-788,
https://hdl.handle.net/21.15107/rcub_vinar_12800 .

TY  - CONF
AU  - Grce, Ana
AU  - Pjević, Dejan
AU  - Milosavljević, Momir
AU  - Grieseler, Rolf
AU  - Schaaf, Peter
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12689
AB  - Titanium-dioxide nanostructures and thin films are interesting for application in environmental protection, for water and air purification from toxic compounds, and photocatalytic degradation of water, where separation of H2  is important for the development of new energy sources. Furthermore, they are interesting for fabrication of solar cells, various sensor applications, transparent conducting oxides (TCO), etc [1-3]. Stoichiometric TiO2 phase has a wide optoelectronic band gap of ~3.2 eV, which makes it a dielectric at lower temperatures and a semiconductor at higher temperatures. It has a high absorption coefficient in the range of UV radiation, but low in the visible light region, and this makes significant constrains for its usage as a photocatalyst. For reducing energy gap, better absorption in visible light region and more efficient application it is necessary to add doping material species, which can be metal or non-metal ions.When used as a photocatalyst in form of a powder, TiO2 nanoparticles are embedded in photosensitizing dyes which absorb visible light, or they are partly covered with nanoparticles of some transition metal to enhance injection of charge carriers. Recent developments involve the use of physical vapor deposition (vacuum evaporation or ion sputtering) to synthesize TiO2  thin film structures, and ion implantation for their doping. The advantage of using physical vapor deposition is that the Ti:O ratio can be varied, and the films can be deposited on any supporting or large area substrates. On the other hand, ion implantation is a proven technique for introducing dopant atomic species into the crystal lattice of semiconductor materials. In these experiments TiO2  thin films were synthesized by physical vapor deposition (PVD) method, using three different procedures: (i) reactive d.c. ion sputtering of pure Ti target, using Ar ions and introducing O2  in the deposition chamber; (ii) r.f. sputtering of TiO2  target, using Ar + O2  gas mixture; and (iii) reactive e-beam evaporation of pure Ti in the presence of introduced O2 . In case of reactive d.c. ion sputtering additional experiments involved a controlled introduction of nitrogen in the interaction chamber, which yielded doping of the deposited TiO2  thin films, in reducing their band gap and enhancing absorption of visible light. The films were deposited to a thickness of a few hundred nm on silicon wafers and glass slide substrates. Structural and compositional characterization of samples included X-ray diffraction analysis (XRD), transmission electron microscopy (TEM, HRTEM), Rutherford backscattering spectrometry (RBS), and X-ray photoelectron spectroscopy (XPS). Optical characterizations were done by measuringthe transmission and diffuse reflection UV/VIS spectra. Photocatalytic activity was measured by determining the photodegradation rate of organic solutions Structural characterization revealed that as-deposited samples grow in form of a mixture of very fine nanocrystalline grains of rutile and anatase TiO2  phases and TiO. Hence, in order to homogenize the TiO2  stoichiometry andinduce the growth of larger grains it was necessary to anneal the samples in air, at temperatures of 400 and 600 o C [4]. This procedure was performed on all samples after deposition. Bright-field cross-sectional images taken from two different TiO2  films deposited on Si wafers are shown in Fig. 1. Sharp contrast regions within the films indicate their polycrystalline structure. The results of investigations showed that it is possible to tailor the structure and properties of the obtained TiO2  thin films by adjusting the processing parameters.
PB  - Belgrade : Serbian Chemical Society
C3  - ENVIROCHEM 2018 : 8th Symposium Chemistry and Environmental Protection : program and the book of abstracts
T1  - Nanostructured titanium-dioxide thin films for environmental applications
SP  - 205
EP  - 206
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12689
ER  - 

@conference{
author = "Grce, Ana and Pjević, Dejan and Milosavljević, Momir and Grieseler, Rolf and Schaaf, Peter",
year = "2018",
abstract = "Titanium-dioxide nanostructures and thin films are interesting for application in environmental protection, for water and air purification from toxic compounds, and photocatalytic degradation of water, where separation of H2  is important for the development of new energy sources. Furthermore, they are interesting for fabrication of solar cells, various sensor applications, transparent conducting oxides (TCO), etc [1-3]. Stoichiometric TiO2 phase has a wide optoelectronic band gap of ~3.2 eV, which makes it a dielectric at lower temperatures and a semiconductor at higher temperatures. It has a high absorption coefficient in the range of UV radiation, but low in the visible light region, and this makes significant constrains for its usage as a photocatalyst. For reducing energy gap, better absorption in visible light region and more efficient application it is necessary to add doping material species, which can be metal or non-metal ions.When used as a photocatalyst in form of a powder, TiO2 nanoparticles are embedded in photosensitizing dyes which absorb visible light, or they are partly covered with nanoparticles of some transition metal to enhance injection of charge carriers. Recent developments involve the use of physical vapor deposition (vacuum evaporation or ion sputtering) to synthesize TiO2  thin film structures, and ion implantation for their doping. The advantage of using physical vapor deposition is that the Ti:O ratio can be varied, and the films can be deposited on any supporting or large area substrates. On the other hand, ion implantation is a proven technique for introducing dopant atomic species into the crystal lattice of semiconductor materials. In these experiments TiO2  thin films were synthesized by physical vapor deposition (PVD) method, using three different procedures: (i) reactive d.c. ion sputtering of pure Ti target, using Ar ions and introducing O2  in the deposition chamber; (ii) r.f. sputtering of TiO2  target, using Ar + O2  gas mixture; and (iii) reactive e-beam evaporation of pure Ti in the presence of introduced O2 . In case of reactive d.c. ion sputtering additional experiments involved a controlled introduction of nitrogen in the interaction chamber, which yielded doping of the deposited TiO2  thin films, in reducing their band gap and enhancing absorption of visible light. The films were deposited to a thickness of a few hundred nm on silicon wafers and glass slide substrates. Structural and compositional characterization of samples included X-ray diffraction analysis (XRD), transmission electron microscopy (TEM, HRTEM), Rutherford backscattering spectrometry (RBS), and X-ray photoelectron spectroscopy (XPS). Optical characterizations were done by measuringthe transmission and diffuse reflection UV/VIS spectra. Photocatalytic activity was measured by determining the photodegradation rate of organic solutions Structural characterization revealed that as-deposited samples grow in form of a mixture of very fine nanocrystalline grains of rutile and anatase TiO2  phases and TiO. Hence, in order to homogenize the TiO2  stoichiometry andinduce the growth of larger grains it was necessary to anneal the samples in air, at temperatures of 400 and 600 o C [4]. This procedure was performed on all samples after deposition. Bright-field cross-sectional images taken from two different TiO2  films deposited on Si wafers are shown in Fig. 1. Sharp contrast regions within the films indicate their polycrystalline structure. The results of investigations showed that it is possible to tailor the structure and properties of the obtained TiO2  thin films by adjusting the processing parameters.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "ENVIROCHEM 2018 : 8th Symposium Chemistry and Environmental Protection : program and the book of abstracts",
title = "Nanostructured titanium-dioxide thin films for environmental applications",
pages = "205-206",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12689"
}

Grce, A., Pjević, D., Milosavljević, M., Grieseler, R.,& Schaaf, P.. (2018). Nanostructured titanium-dioxide thin films for environmental applications. in ENVIROCHEM 2018 : 8th Symposium Chemistry and Environmental Protection : program and the book of abstracts
Belgrade : Serbian Chemical Society., 205-206.
https://hdl.handle.net/21.15107/rcub_vinar_12689

Grce A, Pjević D, Milosavljević M, Grieseler R, Schaaf P. Nanostructured titanium-dioxide thin films for environmental applications. in ENVIROCHEM 2018 : 8th Symposium Chemistry and Environmental Protection : program and the book of abstracts. 2018;:205-206.
https://hdl.handle.net/21.15107/rcub_vinar_12689 .

Grce, Ana, Pjević, Dejan, Milosavljević, Momir, Grieseler, Rolf, Schaaf, Peter, "Nanostructured titanium-dioxide thin films for environmental applications" in ENVIROCHEM 2018 : 8th Symposium Chemistry and Environmental Protection : program and the book of abstracts (2018):205-206,
https://hdl.handle.net/21.15107/rcub_vinar_12689 .

TY  - JOUR
AU  - Trtica, Milan
AU  - Radak, Bojan
AU  - Milovanović, Dubravka S.
AU  - Kuzmanović, Miroslav M.
AU  - Savović, Jelena
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7809
AB  - Among numerous existing and developing techniques for the detection of air pollution, laser-based optical methods (LBM) are possibly the most promising ones. Unique sensing capabilities of LBM include high speed of analysis, high selectivity, sensitivity and accuracy, low detection limits, and remote detection. This paper gives a brief review of several laser-based systems for optical sensing of gas-phase chemical agents: laser intra-cavity, photoacoustic and laser-induced breakdown spectroscopy, and remote sensing based on differential absorption. For each method, a brief description of the principles of operation is given, and its analytical capabilities are outlined.
T2  - The European Physical Journal Plus
T1  - Laser-based optical techniques for the detection of chemical agents
VL  - 133
IS  - 7
SP  - 268
DO  - 10.1140/epjp/i2018-12145-4
ER  - 

@article{
author = "Trtica, Milan and Radak, Bojan and Milovanović, Dubravka S. and Kuzmanović, Miroslav M. and Savović, Jelena",
year = "2018",
abstract = "Among numerous existing and developing techniques for the detection of air pollution, laser-based optical methods (LBM) are possibly the most promising ones. Unique sensing capabilities of LBM include high speed of analysis, high selectivity, sensitivity and accuracy, low detection limits, and remote detection. This paper gives a brief review of several laser-based systems for optical sensing of gas-phase chemical agents: laser intra-cavity, photoacoustic and laser-induced breakdown spectroscopy, and remote sensing based on differential absorption. For each method, a brief description of the principles of operation is given, and its analytical capabilities are outlined.",
journal = "The European Physical Journal Plus",
title = "Laser-based optical techniques for the detection of chemical agents",
volume = "133",
number = "7",
pages = "268",
doi = "10.1140/epjp/i2018-12145-4"
}

Trtica, M., Radak, B., Milovanović, D. S., Kuzmanović, M. M.,& Savović, J.. (2018). Laser-based optical techniques for the detection of chemical agents. in The European Physical Journal Plus, 133(7), 268.
https://doi.org/10.1140/epjp/i2018-12145-4

Trtica M, Radak B, Milovanović DS, Kuzmanović MM, Savović J. Laser-based optical techniques for the detection of chemical agents. in The European Physical Journal Plus. 2018;133(7):268.
doi:10.1140/epjp/i2018-12145-4 .

Trtica, Milan, Radak, Bojan, Milovanović, Dubravka S., Kuzmanović, Miroslav M., Savović, Jelena, "Laser-based optical techniques for the detection of chemical agents" in The European Physical Journal Plus, 133, no. 7 (2018):268,
https://doi.org/10.1140/epjp/i2018-12145-4 . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Gajić-Kvaščev, Maja
AU  - Dojčinović, Marina
AU  - Volkov-Husović, Tatjana
AU  - Jančić-Heinemann, Radmila
PY  - 2018
UR  - https://linkinghub.elsevier.com/retrieve/pii/S1044580318313445
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7771
AB  - The aim of this study was to examine the influence of cavitation erosion on the morphology of defects formed on the surfaces of alumina-based materials. The alumina-based samples were exposed to cavitation erosion for 42 min. The damages that occurred were monitored at predefined time intervals by measuring the mass loss and observing the sample surfaces. Digital images of surfaces were processed using an image analysis software package to define morphological characteristics of the damages occurred. The calculated morphological parameters were subjected to analysis by pattern recognition techniques to correlate the appearance of particular morphological characteristics with the behavior of the material during cavitation erosion. The newly established method in describing cavitation erosion which uses pattern recognition approach for treatments of morphological parameters calculated for damages by image analysis tools gave the results efficient for material characterization as the traditional one. © 2018 Elsevier Inc.
T2  - Materials Characterization
T1  - New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach
VL  - 144
SP  - 113
EP  - 119
DO  - 10.1016/j.matchar.2018.07.003
ER  - 

@article{
author = "Vuksanović, Marija M. and Gajić-Kvaščev, Maja and Dojčinović, Marina and Volkov-Husović, Tatjana and Jančić-Heinemann, Radmila",
year = "2018",
abstract = "The aim of this study was to examine the influence of cavitation erosion on the morphology of defects formed on the surfaces of alumina-based materials. The alumina-based samples were exposed to cavitation erosion for 42 min. The damages that occurred were monitored at predefined time intervals by measuring the mass loss and observing the sample surfaces. Digital images of surfaces were processed using an image analysis software package to define morphological characteristics of the damages occurred. The calculated morphological parameters were subjected to analysis by pattern recognition techniques to correlate the appearance of particular morphological characteristics with the behavior of the material during cavitation erosion. The newly established method in describing cavitation erosion which uses pattern recognition approach for treatments of morphological parameters calculated for damages by image analysis tools gave the results efficient for material characterization as the traditional one. © 2018 Elsevier Inc.",
journal = "Materials Characterization",
title = "New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach",
volume = "144",
pages = "113-119",
doi = "10.1016/j.matchar.2018.07.003"
}

Vuksanović, M. M., Gajić-Kvaščev, M., Dojčinović, M., Volkov-Husović, T.,& Jančić-Heinemann, R.. (2018). New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach. in Materials Characterization, 144, 113-119.
https://doi.org/10.1016/j.matchar.2018.07.003

Vuksanović MM, Gajić-Kvaščev M, Dojčinović M, Volkov-Husović T, Jančić-Heinemann R. New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach. in Materials Characterization. 2018;144:113-119.
doi:10.1016/j.matchar.2018.07.003 .

Vuksanović, Marija M., Gajić-Kvaščev, Maja, Dojčinović, Marina, Volkov-Husović, Tatjana, Jančić-Heinemann, Radmila, "New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach" in Materials Characterization, 144 (2018):113-119,
https://doi.org/10.1016/j.matchar.2018.07.003 . .

TY  - JOUR
AU  - Gajić-Kvaščev, Maja
AU  - Bikić, Vesna
AU  - Wright, Victoria J.
AU  - Radosavjević Evans, Ivana
AU  - Damjanović-Vasilić, Ljiljana S.
PY  - 2018
UR  - https://linkinghub.elsevier.com/retrieve/pii/S1296207417304478
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7923
AB  - The chemical and mineralogical composition of ceramic bodies, glazes and pigments, as well as the firing temperatures of main groups of Austrian period painted pottery excavated at the Belgrade Fortress on the territory of Serbia, two groups of Malhornware and one group of Anabaptist faience, were determined by a combination of powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR) spectroscopy, energy dispersive X-ray fluorescence (XRF) and micro-Raman spectroscopy. Investigated pottery was uncovered in the same archaeological context and dated the end of 17th/first decade of 18th century. The obtained mineralogical and chemical composition shows the similarities between the Malhornware groups that indicate a similar production technology. Use of calcareous clay fired at temperatures in the range 850-900 degrees C indicates a different production technology for the Anabaptists faience. The compositional data treatment by multivariate statistical analysis reveals heterogeneity in the Anabaptist faience group of samples, suggesting potential interactions between the local potters and the Anabaptist communities. (C) 2018 Elsevier Masson SAS. All rights reserved.
T2  - Journal of Cultural Heritage
T1  - Archaeometric study of 17th/18th century painted pottery from the Belgrade Fortress
VL  - 32
SP  - 9
EP  - 21
DO  - 10.1016/j.culher.2018.01.018
ER  - 

@article{
author = "Gajić-Kvaščev, Maja and Bikić, Vesna and Wright, Victoria J. and Radosavjević Evans, Ivana and Damjanović-Vasilić, Ljiljana S.",
year = "2018",
abstract = "The chemical and mineralogical composition of ceramic bodies, glazes and pigments, as well as the firing temperatures of main groups of Austrian period painted pottery excavated at the Belgrade Fortress on the territory of Serbia, two groups of Malhornware and one group of Anabaptist faience, were determined by a combination of powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR) spectroscopy, energy dispersive X-ray fluorescence (XRF) and micro-Raman spectroscopy. Investigated pottery was uncovered in the same archaeological context and dated the end of 17th/first decade of 18th century. The obtained mineralogical and chemical composition shows the similarities between the Malhornware groups that indicate a similar production technology. Use of calcareous clay fired at temperatures in the range 850-900 degrees C indicates a different production technology for the Anabaptists faience. The compositional data treatment by multivariate statistical analysis reveals heterogeneity in the Anabaptist faience group of samples, suggesting potential interactions between the local potters and the Anabaptist communities. (C) 2018 Elsevier Masson SAS. All rights reserved.",
journal = "Journal of Cultural Heritage",
title = "Archaeometric study of 17th/18th century painted pottery from the Belgrade Fortress",
volume = "32",
pages = "9-21",
doi = "10.1016/j.culher.2018.01.018"
}

Gajić-Kvaščev, M., Bikić, V., Wright, V. J., Radosavjević Evans, I.,& Damjanović-Vasilić, L. S.. (2018). Archaeometric study of 17th/18th century painted pottery from the Belgrade Fortress. in Journal of Cultural Heritage, 32, 9-21.
https://doi.org/10.1016/j.culher.2018.01.018

Gajić-Kvaščev M, Bikić V, Wright VJ, Radosavjević Evans I, Damjanović-Vasilić LS. Archaeometric study of 17th/18th century painted pottery from the Belgrade Fortress. in Journal of Cultural Heritage. 2018;32:9-21.
doi:10.1016/j.culher.2018.01.018 .

Gajić-Kvaščev, Maja, Bikić, Vesna, Wright, Victoria J., Radosavjević Evans, Ivana, Damjanović-Vasilić, Ljiljana S., "Archaeometric study of 17th/18th century painted pottery from the Belgrade Fortress" in Journal of Cultural Heritage, 32 (2018):9-21,
https://doi.org/10.1016/j.culher.2018.01.018 . .

TY  - JOUR
AU  - Petronić, Sanja
AU  - Jovičić, Radomir
AU  - Sedmak, Aleksandar
AU  - Petrović, Aleksandar
AU  - Birdeanu, Aurel Valentin
AU  - Vašalić, Dragan
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10491
AB  - Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza
T2  - Procesna tehnika
T1  - Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza
VL  - 30
IS  - 1
SP  - 32
EP  - 39
DO  - 10.24094/ptc.018.30.1.32
ER  - 

@article{
author = "Petronić, Sanja and Jovičić, Radomir and Sedmak, Aleksandar and Petrović, Aleksandar and Birdeanu, Aurel Valentin and Vašalić, Dragan",
year = "2018",
abstract = "Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza",
journal = "Procesna tehnika",
title = "Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza",
volume = "30",
number = "1",
pages = "32-39",
doi = "10.24094/ptc.018.30.1.32"
}

Petronić, S., Jovičić, R., Sedmak, A., Petrović, A., Birdeanu, A. V.,& Vašalić, D.. (2018). Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza. in Procesna tehnika, 30(1), 32-39.
https://doi.org/10.24094/ptc.018.30.1.32

Petronić S, Jovičić R, Sedmak A, Petrović A, Birdeanu AV, Vašalić D. Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza. in Procesna tehnika. 2018;30(1):32-39.
doi:10.24094/ptc.018.30.1.32 .

Petronić, Sanja, Jovičić, Radomir, Sedmak, Aleksandar, Petrović, Aleksandar, Birdeanu, Aurel Valentin, Vašalić, Dragan, "Inspekcija cevovoda u eksploataciji i analiza uzroka otkaza" in Procesna tehnika, 30, no. 1 (2018):32-39,
https://doi.org/10.24094/ptc.018.30.1.32 . .

TY  - JOUR
AU  - Waisi, Hadi
AU  - Janković, Bojan Ž.
AU  - Nikolić, Bogdan R.
AU  - Dragičević, Vesna
AU  - Panić, I.
AU  - Tosti, Tomislav B.
AU  - Trifković, Jelena Đ.
PY  - 2018
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0254629918300814
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7863
AB  - 24-epibrassinolide (24-EBL) is plant steroid hormone that can regulate several physiological effects in plants, including promotion of cell growth and induction of heat stress tolerance. The purpose of this work is to investigate the influence of various concentrations of 24-EBL on the dehydration mechanism of seedlings of two maize hybrids (ZP434 and ZP704). Control and treated samples were subjected to isothermal conditions for dehydration processes. The effects of carbohydrates and mineral contents on the possible changes in the dehydration mechanism (from kinetics standpoint) were investigated. Comparing control samples to samples treated with 24-EBL, it was found that different dehydration mechanisms exist. The differences arise from the influence of 24-EBL, that causes a significant increase of phosphorus values for ZP704, whilst the reverse was identified for ZP434. It was assumed that the plumule sensitivity to dehydration stress originates from the interaction of water with primary amino groups as cations in polyamines, for lower concentrations of 24-EBL. It was found that the temperature variation (105–130 °C) leads to situations where trehalose does not arrive fast enough to “replace the water” because its handicap to binds (by hydrogen bonds) to biomolecules instead of water. It was found that 24-EBL cause changes of carbohydrates properties, which are important for the defense mechanism from environmental stresses. © 2018 SAAB
T2  - South African Journal of Botany
T1  - Influence of various concentrations of 24-epibrassinolide on the kinetic parameters during isothermal dehydration of two maize hybrids
VL  - 119
SP  - 69
EP  - 79
DO  - 10.1016/j.sajb.2018.08.006
ER  - 

@article{
author = "Waisi, Hadi and Janković, Bojan Ž. and Nikolić, Bogdan R. and Dragičević, Vesna and Panić, I. and Tosti, Tomislav B. and Trifković, Jelena Đ.",
year = "2018",
abstract = "24-epibrassinolide (24-EBL) is plant steroid hormone that can regulate several physiological effects in plants, including promotion of cell growth and induction of heat stress tolerance. The purpose of this work is to investigate the influence of various concentrations of 24-EBL on the dehydration mechanism of seedlings of two maize hybrids (ZP434 and ZP704). Control and treated samples were subjected to isothermal conditions for dehydration processes. The effects of carbohydrates and mineral contents on the possible changes in the dehydration mechanism (from kinetics standpoint) were investigated. Comparing control samples to samples treated with 24-EBL, it was found that different dehydration mechanisms exist. The differences arise from the influence of 24-EBL, that causes a significant increase of phosphorus values for ZP704, whilst the reverse was identified for ZP434. It was assumed that the plumule sensitivity to dehydration stress originates from the interaction of water with primary amino groups as cations in polyamines, for lower concentrations of 24-EBL. It was found that the temperature variation (105–130 °C) leads to situations where trehalose does not arrive fast enough to “replace the water” because its handicap to binds (by hydrogen bonds) to biomolecules instead of water. It was found that 24-EBL cause changes of carbohydrates properties, which are important for the defense mechanism from environmental stresses. © 2018 SAAB",
journal = "South African Journal of Botany",
title = "Influence of various concentrations of 24-epibrassinolide on the kinetic parameters during isothermal dehydration of two maize hybrids",
volume = "119",
pages = "69-79",
doi = "10.1016/j.sajb.2018.08.006"
}

Waisi, H., Janković, B. Ž., Nikolić, B. R., Dragičević, V., Panić, I., Tosti, T. B.,& Trifković, J. Đ.. (2018). Influence of various concentrations of 24-epibrassinolide on the kinetic parameters during isothermal dehydration of two maize hybrids. in South African Journal of Botany, 119, 69-79.
https://doi.org/10.1016/j.sajb.2018.08.006

Waisi H, Janković BŽ, Nikolić BR, Dragičević V, Panić I, Tosti TB, Trifković JĐ. Influence of various concentrations of 24-epibrassinolide on the kinetic parameters during isothermal dehydration of two maize hybrids. in South African Journal of Botany. 2018;119:69-79.
doi:10.1016/j.sajb.2018.08.006 .

Waisi, Hadi, Janković, Bojan Ž., Nikolić, Bogdan R., Dragičević, Vesna, Panić, I., Tosti, Tomislav B., Trifković, Jelena Đ., "Influence of various concentrations of 24-epibrassinolide on the kinetic parameters during isothermal dehydration of two maize hybrids" in South African Journal of Botany, 119 (2018):69-79,
https://doi.org/10.1016/j.sajb.2018.08.006 . .

TY  - JOUR
AU  - Petronić, Sanja Z.
AU  - Birdeanu, Aurel Valentin
AU  - Jovičić, Radomir D.
AU  - Čolić, Katarina
AU  - Vašalić, Dragan
AU  - Erić-Cekić, Olivera
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7846
AB  - The Pressure Equipment Directive (PED) and Regulations on Technical Requirements for Designing, Manufacturing and Conformity Assessment of Pressure Equipment bring a number of changes to the design of pressure equipment in relation to the Technical Regulations for Stable Pressure Vessels, 1983. Among the most important changes are the essential safety requirements for pressure equipment. The changes in the formula, for all materials, for calculating the allowable stresses, as well as the change in the value of the test pressure, the new Regulations use the 1.0% proof strength as the relevant value for calculating the permissible membrane stress and thickness of pressure equipment walls. In this paper, the differences in the allowable stresses, the required wall thicknesses, and the approximate savings in the material in the case of a milk reservoir, calculated according to the requirements of the Directive and the new Regulations on one hand, and the old Regulations on the other, are presented. © 2018 The Author.
T2  - Structural Integrity and Life
T1  - Impact of austenitic steels’ mechanical properties on allowed stress and wall thickness of pressure equipment
VL  - 18
IS  - 1
SP  - 45
EP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7846
ER  - 

@article{
author = "Petronić, Sanja Z. and Birdeanu, Aurel Valentin and Jovičić, Radomir D. and Čolić, Katarina and Vašalić, Dragan and Erić-Cekić, Olivera",
year = "2018",
abstract = "The Pressure Equipment Directive (PED) and Regulations on Technical Requirements for Designing, Manufacturing and Conformity Assessment of Pressure Equipment bring a number of changes to the design of pressure equipment in relation to the Technical Regulations for Stable Pressure Vessels, 1983. Among the most important changes are the essential safety requirements for pressure equipment. The changes in the formula, for all materials, for calculating the allowable stresses, as well as the change in the value of the test pressure, the new Regulations use the 1.0% proof strength as the relevant value for calculating the permissible membrane stress and thickness of pressure equipment walls. In this paper, the differences in the allowable stresses, the required wall thicknesses, and the approximate savings in the material in the case of a milk reservoir, calculated according to the requirements of the Directive and the new Regulations on one hand, and the old Regulations on the other, are presented. © 2018 The Author.",
journal = "Structural Integrity and Life",
title = "Impact of austenitic steels’ mechanical properties on allowed stress and wall thickness of pressure equipment",
volume = "18",
number = "1",
pages = "45-51",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7846"
}

Petronić, S. Z., Birdeanu, A. V., Jovičić, R. D., Čolić, K., Vašalić, D.,& Erić-Cekić, O.. (2018). Impact of austenitic steels’ mechanical properties on allowed stress and wall thickness of pressure equipment. in Structural Integrity and Life, 18(1), 45-51.
https://hdl.handle.net/21.15107/rcub_vinar_7846

Petronić SZ, Birdeanu AV, Jovičić RD, Čolić K, Vašalić D, Erić-Cekić O. Impact of austenitic steels’ mechanical properties on allowed stress and wall thickness of pressure equipment. in Structural Integrity and Life. 2018;18(1):45-51.
https://hdl.handle.net/21.15107/rcub_vinar_7846 .

Petronić, Sanja Z., Birdeanu, Aurel Valentin, Jovičić, Radomir D., Čolić, Katarina, Vašalić, Dragan, Erić-Cekić, Olivera, "Impact of austenitic steels’ mechanical properties on allowed stress and wall thickness of pressure equipment" in Structural Integrity and Life, 18, no. 1 (2018):45-51,
https://hdl.handle.net/21.15107/rcub_vinar_7846 .

TY  - JOUR
AU  - Maksimović, Vesna
AU  - Devečerski, Aleksandar
AU  - Došen, Anja M.
AU  - Bobić, Ilija
AU  - Erić, Milić D.
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1391
AB  - In the present study, an aluminum alloy A356 composite with addition of 5 wt% fly ash was synthesized and subjected to the cavitation erosion resistance test in order to find out if this material can be used in conditions where the cavitation erosion resistance is expected. Obtained results were compared with that of as-cast aluminum A356 alloy, confirming that composite possessed better cavitation erosion resistance than original alloy and that fly ash can be used as an effective reinforcement in metal matrix composites production. Scanning electron microscopy and optical microscopy was used for microstructural analysis. Phase identification of fly ash was carried out using X-ray diffraction analysis. Several methods for monitoring the cavitation erosion resistance of A356 alloy and corresponding composite were applied, such as: mass loss (Delta m), volume loss (Delta V), level of surface degradatiom (P/Po) and pit depth.
T2  - Transactions of the Indian Institute of Metals
T1  - Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite
VL  - 70
IS  - 1
SP  - 97
EP  - 105
DO  - 10.1007/s12666-016-0864-1
ER  - 

@article{
author = "Maksimović, Vesna and Devečerski, Aleksandar and Došen, Anja M. and Bobić, Ilija and Erić, Milić D. and Volkov-Husović, Tatjana",
year = "2017",
abstract = "In the present study, an aluminum alloy A356 composite with addition of 5 wt% fly ash was synthesized and subjected to the cavitation erosion resistance test in order to find out if this material can be used in conditions where the cavitation erosion resistance is expected. Obtained results were compared with that of as-cast aluminum A356 alloy, confirming that composite possessed better cavitation erosion resistance than original alloy and that fly ash can be used as an effective reinforcement in metal matrix composites production. Scanning electron microscopy and optical microscopy was used for microstructural analysis. Phase identification of fly ash was carried out using X-ray diffraction analysis. Several methods for monitoring the cavitation erosion resistance of A356 alloy and corresponding composite were applied, such as: mass loss (Delta m), volume loss (Delta V), level of surface degradatiom (P/Po) and pit depth.",
journal = "Transactions of the Indian Institute of Metals",
title = "Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite",
volume = "70",
number = "1",
pages = "97-105",
doi = "10.1007/s12666-016-0864-1"
}

Maksimović, V., Devečerski, A., Došen, A. M., Bobić, I., Erić, M. D.,& Volkov-Husović, T.. (2017). Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite. in Transactions of the Indian Institute of Metals, 70(1), 97-105.
https://doi.org/10.1007/s12666-016-0864-1

Maksimović V, Devečerski A, Došen AM, Bobić I, Erić MD, Volkov-Husović T. Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite. in Transactions of the Indian Institute of Metals. 2017;70(1):97-105.
doi:10.1007/s12666-016-0864-1 .

Maksimović, Vesna, Devečerski, Aleksandar, Došen, Anja M., Bobić, Ilija, Erić, Milić D., Volkov-Husović, Tatjana, "Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite" in Transactions of the Indian Institute of Metals, 70, no. 1 (2017):97-105,
https://doi.org/10.1007/s12666-016-0864-1 . .

TY  - JOUR
AU  - Aćimović, Danka D.
AU  - Nikolić, Željka
AU  - Tošić, Miloš S.
AU  - Milovanović, Dubravka S.
AU  - Nikolić, Vladimir M.
AU  - Brdarić, Tanja
AU  - Marčeta Kaninski, Milica
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1390
AB  - Human exposure to persistent organic contaminants, from building materials, negatively affects peoples health and overall quality of life. This paper presents the validation and uncertainty assessment of the analytical method, developed for the simultaneous determination of 16 EPA polycyclic aromatic hydrocarbons (PAHs) in solid-solid concrete by ultra-performance liquid chromatography with photo diode-array detector. Linearity of calibration curves was good over the whole range of calibration. Limits of detection varied between 0.2 and 2.9 mu gkg(-1). The accuracy in terms of recovery of the validated method is within the range from 54 to 106%. The developed method proved to be appropriate for analysis of PAHs and can be used for the quality control testing of concrete during the construction of new buildings, the old residences and related buildings associated with sick-building syndrome. In addition, this is the first reported method described for the evaluation of PAHs in solid-solid concrete. (C) 2016 Elsevier B.V. All rights reserved.
T2  - Journal of Hazardous Materials
T1  - Validation and uncertainty estimation of UPLC-PDA method for the analysis of polycyclic aromatic hydrocarbons in concrete
VL  - 325
SP  - 271
EP  - 278
DO  - 10.1016/j.jhazmat.2016.12.008
ER  - 

@article{
author = "Aćimović, Danka D. and Nikolić, Željka and Tošić, Miloš S. and Milovanović, Dubravka S. and Nikolić, Vladimir M. and Brdarić, Tanja and Marčeta Kaninski, Milica",
year = "2017",
abstract = "Human exposure to persistent organic contaminants, from building materials, negatively affects peoples health and overall quality of life. This paper presents the validation and uncertainty assessment of the analytical method, developed for the simultaneous determination of 16 EPA polycyclic aromatic hydrocarbons (PAHs) in solid-solid concrete by ultra-performance liquid chromatography with photo diode-array detector. Linearity of calibration curves was good over the whole range of calibration. Limits of detection varied between 0.2 and 2.9 mu gkg(-1). The accuracy in terms of recovery of the validated method is within the range from 54 to 106%. The developed method proved to be appropriate for analysis of PAHs and can be used for the quality control testing of concrete during the construction of new buildings, the old residences and related buildings associated with sick-building syndrome. In addition, this is the first reported method described for the evaluation of PAHs in solid-solid concrete. (C) 2016 Elsevier B.V. All rights reserved.",
journal = "Journal of Hazardous Materials",
title = "Validation and uncertainty estimation of UPLC-PDA method for the analysis of polycyclic aromatic hydrocarbons in concrete",
volume = "325",
pages = "271-278",
doi = "10.1016/j.jhazmat.2016.12.008"
}

Aćimović, D. D., Nikolić, Ž., Tošić, M. S., Milovanović, D. S., Nikolić, V. M., Brdarić, T.,& Marčeta Kaninski, M.. (2017). Validation and uncertainty estimation of UPLC-PDA method for the analysis of polycyclic aromatic hydrocarbons in concrete. in Journal of Hazardous Materials, 325, 271-278.
https://doi.org/10.1016/j.jhazmat.2016.12.008

Aćimović DD, Nikolić Ž, Tošić MS, Milovanović DS, Nikolić VM, Brdarić T, Marčeta Kaninski M. Validation and uncertainty estimation of UPLC-PDA method for the analysis of polycyclic aromatic hydrocarbons in concrete. in Journal of Hazardous Materials. 2017;325:271-278.
doi:10.1016/j.jhazmat.2016.12.008 .

Aćimović, Danka D., Nikolić, Željka, Tošić, Miloš S., Milovanović, Dubravka S., Nikolić, Vladimir M., Brdarić, Tanja, Marčeta Kaninski, Milica, "Validation and uncertainty estimation of UPLC-PDA method for the analysis of polycyclic aromatic hydrocarbons in concrete" in Journal of Hazardous Materials, 325 (2017):271-278,
https://doi.org/10.1016/j.jhazmat.2016.12.008 . .

TY  - CONF
AU  - Ekmeščić, Bojana
AU  - Sandić, Zvijezdana
AU  - Suručić, Ljiljana T.
AU  - Marković, Jelena P.
AU  - Stefanović, I. S.
AU  - Nastasović, Aleksandra B.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9252
AB  - Intraparticle diffusion kinetic model (IPD) was used to elucidate the
influence of macroporous glycidyl methacrylate (GMA) and ethylene glycol
dimethacrylate (EGDMA) copolymer (PGME) with attached diethylene
triamine (PGME-deta) on the competitive Cu(II), Cd(II), Co(II) and Ni(II)
ions sorption from aqueous solutions. Surface sorption was examined by
SEM-EDS analysis.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2016 : 13th international conference on fundamental and applied aspects of physical chemistry
T1  - Intraparticle diffusion and adsorption of heavy metals onto porous polymer
SP  - 637
EP  - 640
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9252
ER  - 

@conference{
author = "Ekmeščić, Bojana and Sandić, Zvijezdana and Suručić, Ljiljana T. and Marković, Jelena P. and Stefanović, I. S. and Nastasović, Aleksandra B.",
year = "2016",
abstract = "Intraparticle diffusion kinetic model (IPD) was used to elucidate the
influence of macroporous glycidyl methacrylate (GMA) and ethylene glycol
dimethacrylate (EGDMA) copolymer (PGME) with attached diethylene
triamine (PGME-deta) on the competitive Cu(II), Cd(II), Co(II) and Ni(II)
ions sorption from aqueous solutions. Surface sorption was examined by
SEM-EDS analysis.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2016 : 13th international conference on fundamental and applied aspects of physical chemistry",
title = "Intraparticle diffusion and adsorption of heavy metals onto porous polymer",
pages = "637-640",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9252"
}

Ekmeščić, B., Sandić, Z., Suručić, L. T., Marković, J. P., Stefanović, I. S.,& Nastasović, A. B.. (2016). Intraparticle diffusion and adsorption of heavy metals onto porous polymer. in Physical chemistry 2016 : 13th international conference on fundamental and applied aspects of physical chemistry
Society of Physical Chemists of Serbia., 637-640.
https://hdl.handle.net/21.15107/rcub_vinar_9252

Ekmeščić B, Sandić Z, Suručić LT, Marković JP, Stefanović IS, Nastasović AB. Intraparticle diffusion and adsorption of heavy metals onto porous polymer. in Physical chemistry 2016 : 13th international conference on fundamental and applied aspects of physical chemistry. 2016;:637-640.
https://hdl.handle.net/21.15107/rcub_vinar_9252 .

Ekmeščić, Bojana, Sandić, Zvijezdana, Suručić, Ljiljana T., Marković, Jelena P., Stefanović, I. S., Nastasović, Aleksandra B., "Intraparticle diffusion and adsorption of heavy metals onto porous polymer" in Physical chemistry 2016 : 13th international conference on fundamental and applied aspects of physical chemistry (2016):637-640,
https://hdl.handle.net/21.15107/rcub_vinar_9252 .

TY  - JOUR
AU  - Maksin, Danijela D.
AU  - Nastasović, Aleksandra B.
AU  - Maksin, Tatjana N.
AU  - Sandić, Zvjezdana
AU  - Loos, Katja
AU  - Ekmescic, Bojana M.
AU  - Onjia, Antonije E.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/984
AB  - Synthesis of an unconventional resin based on 4-vinylpyridine (4-VP) and its Cu(II) sorption behavior were studied. Three samples of macroporous crosslinked poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) (P4VPE) with different porosity parameters were prepared by suspension copolymerization by varying the n-heptane amount in the inert component. The samples were characterized by mercury porosimetry, elemental analysis and X-ray photoelectron spectroscopy (XPS). The sorption of P4VPE for Cu(II) ions, determined under non-competitive conditions, was relatively rapid, i.e., the maximum capacity was reached within 30 min. The maximum experimental sorption capacity for the sample with the highest values of pore diameter and specific pore volume (sample 3, Q(eq) = 89 mg g(-1)) was 17.5 times higher than for the sample with the lowest values of pore diameter and specific pore volume (sample 1, Q(eq) = 5.1 mg g(-1)). Since the values for pyridine content in all P4VPE samples were almost the same, it was concluded that the porosity parameters have predominant influence on Cu(II) sorption rates on P4VPE. The sorption behavior and the rate-controlling mechanisms were analyzed using six kinetic models (pseudo-first order, pseudo-second order, Elovich, intraparticle diffusion, Bangham and Boyd models). XPS study clarified the nature of the formed P4VPE-Cu(II) species.
T2  - Hemijska industrija
T1  - Cu(II) immobilization onto a one-step synthesized poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) resin: Kinetics and XPS analysis
VL  - 70
IS  - 1
SP  - 9
EP  - 19
DO  - 10.2298/HEMIND141203007M
ER  - 

@article{
author = "Maksin, Danijela D. and Nastasović, Aleksandra B. and Maksin, Tatjana N. and Sandić, Zvjezdana and Loos, Katja and Ekmescic, Bojana M. and Onjia, Antonije E.",
year = "2016",
abstract = "Synthesis of an unconventional resin based on 4-vinylpyridine (4-VP) and its Cu(II) sorption behavior were studied. Three samples of macroporous crosslinked poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) (P4VPE) with different porosity parameters were prepared by suspension copolymerization by varying the n-heptane amount in the inert component. The samples were characterized by mercury porosimetry, elemental analysis and X-ray photoelectron spectroscopy (XPS). The sorption of P4VPE for Cu(II) ions, determined under non-competitive conditions, was relatively rapid, i.e., the maximum capacity was reached within 30 min. The maximum experimental sorption capacity for the sample with the highest values of pore diameter and specific pore volume (sample 3, Q(eq) = 89 mg g(-1)) was 17.5 times higher than for the sample with the lowest values of pore diameter and specific pore volume (sample 1, Q(eq) = 5.1 mg g(-1)). Since the values for pyridine content in all P4VPE samples were almost the same, it was concluded that the porosity parameters have predominant influence on Cu(II) sorption rates on P4VPE. The sorption behavior and the rate-controlling mechanisms were analyzed using six kinetic models (pseudo-first order, pseudo-second order, Elovich, intraparticle diffusion, Bangham and Boyd models). XPS study clarified the nature of the formed P4VPE-Cu(II) species.",
journal = "Hemijska industrija",
title = "Cu(II) immobilization onto a one-step synthesized poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) resin: Kinetics and XPS analysis",
volume = "70",
number = "1",
pages = "9-19",
doi = "10.2298/HEMIND141203007M"
}

Maksin, D. D., Nastasović, A. B., Maksin, T. N., Sandić, Z., Loos, K., Ekmescic, B. M.,& Onjia, A. E.. (2016). Cu(II) immobilization onto a one-step synthesized poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) resin: Kinetics and XPS analysis. in Hemijska industrija, 70(1), 9-19.
https://doi.org/10.2298/HEMIND141203007M

Maksin DD, Nastasović AB, Maksin TN, Sandić Z, Loos K, Ekmescic BM, Onjia AE. Cu(II) immobilization onto a one-step synthesized poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) resin: Kinetics and XPS analysis. in Hemijska industrija. 2016;70(1):9-19.
doi:10.2298/HEMIND141203007M .

Maksin, Danijela D., Nastasović, Aleksandra B., Maksin, Tatjana N., Sandić, Zvjezdana, Loos, Katja, Ekmescic, Bojana M., Onjia, Antonije E., "Cu(II) immobilization onto a one-step synthesized poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) resin: Kinetics and XPS analysis" in Hemijska industrija, 70, no. 1 (2016):9-19,
https://doi.org/10.2298/HEMIND141203007M . .

TY  - JOUR
AU  - Dimitrijevic, Marija
AU  - Jančić-Heinemann, Radmila
AU  - Mitraković, Dragan
AU  - Gajić-Kvaščev, Maja
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/510
AB  - The surface defects on alumina-based refractory arising from thermal shock were studied using image analysis and statistical tools. Alumina-based refractory specimens were prepared by adding a different amount of fibers into their original composition and compacted on different pressures. Obtained specimens were subjected to thermal shock, and induced surface defects were characterized by their morphological parameters determined using the image analysis procedure. The influence of preparation conditions on the surface defects morphology was studied using principle component analysis. It was shown that morphological parameters of defects vary corresponding to the composition and preparation conditions of ceramic material.
T2  - International Journal of Applied Ceramic Technology
T1  - Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects
VL  - 12
IS  - 3
SP  - 598
EP  - 607
DO  - 10.1111/ijac.12209
ER  - 

@article{
author = "Dimitrijevic, Marija and Jančić-Heinemann, Radmila and Mitraković, Dragan and Gajić-Kvaščev, Maja",
year = "2015",
abstract = "The surface defects on alumina-based refractory arising from thermal shock were studied using image analysis and statistical tools. Alumina-based refractory specimens were prepared by adding a different amount of fibers into their original composition and compacted on different pressures. Obtained specimens were subjected to thermal shock, and induced surface defects were characterized by their morphological parameters determined using the image analysis procedure. The influence of preparation conditions on the surface defects morphology was studied using principle component analysis. It was shown that morphological parameters of defects vary corresponding to the composition and preparation conditions of ceramic material.",
journal = "International Journal of Applied Ceramic Technology",
title = "Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects",
volume = "12",
number = "3",
pages = "598-607",
doi = "10.1111/ijac.12209"
}

Dimitrijevic, M., Jančić-Heinemann, R., Mitraković, D.,& Gajić-Kvaščev, M.. (2015). Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects. in International Journal of Applied Ceramic Technology, 12(3), 598-607.
https://doi.org/10.1111/ijac.12209

Dimitrijevic M, Jančić-Heinemann R, Mitraković D, Gajić-Kvaščev M. Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects. in International Journal of Applied Ceramic Technology. 2015;12(3):598-607.
doi:10.1111/ijac.12209 .

Dimitrijevic, Marija, Jančić-Heinemann, Radmila, Mitraković, Dragan, Gajić-Kvaščev, Maja, "Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects" in International Journal of Applied Ceramic Technology, 12, no. 3 (2015):598-607,
https://doi.org/10.1111/ijac.12209 . .

TY  - JOUR
AU  - Damjanović, Ljiljana S.
AU  - Gajić-Kvaščev, Maja
AU  - Durdevic, J.
AU  - Andrić, Velibor
AU  - Marić-Stojanović, M.
AU  - Lazić, T.
AU  - Nikolic, S.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/706
AB  - A canvas painting by Milo Milunovic The Inspiration of the poet was studied by energy dispersive X-Ray fluorescence (EDXRF), micro-Raman and Fourier transform infrared (FTIR) spectroscopy in order to identify materials used by the artist and his painting technique. Study is perfomed combining in situ non-destructive method with the preparation and study of cross-section samples and raw fragments of the samples. Milo Milunovic, an eminent painter from Balkan region, made a copy of the Nicolas Poussins original painting in Louvre in 1926/27. Obtained results revealed following pigments on the investigated canvas painting: vermilion, minium, cobalt blue, ultramarine, lead white, zinc white, cadmium yellow, chrome-based green pigment and several earth pigments - red and yellow ocher, green earth and umber. Ground layer was made of lead white mixed with calcium carbonate. (C) 2015 Elsevier Ltd. All rights reserved.
T2  - Radiation Physics and Chemistry
T1  - The characterization of canvas painting by the Serbian artist Milo Milunovic using X-ray fluorescence, micro-Raman and FTIR spectroscopy
VL  - 115
SP  - 135
EP  - 142
DO  - 10.1016/j.radphyschem.2015.06.017
ER  - 

@article{
author = "Damjanović, Ljiljana S. and Gajić-Kvaščev, Maja and Durdevic, J. and Andrić, Velibor and Marić-Stojanović, M. and Lazić, T. and Nikolic, S.",
year = "2015",
abstract = "A canvas painting by Milo Milunovic The Inspiration of the poet was studied by energy dispersive X-Ray fluorescence (EDXRF), micro-Raman and Fourier transform infrared (FTIR) spectroscopy in order to identify materials used by the artist and his painting technique. Study is perfomed combining in situ non-destructive method with the preparation and study of cross-section samples and raw fragments of the samples. Milo Milunovic, an eminent painter from Balkan region, made a copy of the Nicolas Poussins original painting in Louvre in 1926/27. Obtained results revealed following pigments on the investigated canvas painting: vermilion, minium, cobalt blue, ultramarine, lead white, zinc white, cadmium yellow, chrome-based green pigment and several earth pigments - red and yellow ocher, green earth and umber. Ground layer was made of lead white mixed with calcium carbonate. (C) 2015 Elsevier Ltd. All rights reserved.",
journal = "Radiation Physics and Chemistry",
title = "The characterization of canvas painting by the Serbian artist Milo Milunovic using X-ray fluorescence, micro-Raman and FTIR spectroscopy",
volume = "115",
pages = "135-142",
doi = "10.1016/j.radphyschem.2015.06.017"
}

Damjanović, L. S., Gajić-Kvaščev, M., Durdevic, J., Andrić, V., Marić-Stojanović, M., Lazić, T.,& Nikolic, S.. (2015). The characterization of canvas painting by the Serbian artist Milo Milunovic using X-ray fluorescence, micro-Raman and FTIR spectroscopy. in Radiation Physics and Chemistry, 115, 135-142.
https://doi.org/10.1016/j.radphyschem.2015.06.017

Damjanović LS, Gajić-Kvaščev M, Durdevic J, Andrić V, Marić-Stojanović M, Lazić T, Nikolic S. The characterization of canvas painting by the Serbian artist Milo Milunovic using X-ray fluorescence, micro-Raman and FTIR spectroscopy. in Radiation Physics and Chemistry. 2015;115:135-142.
doi:10.1016/j.radphyschem.2015.06.017 .

Damjanović, Ljiljana S., Gajić-Kvaščev, Maja, Durdevic, J., Andrić, Velibor, Marić-Stojanović, M., Lazić, T., Nikolic, S., "The characterization of canvas painting by the Serbian artist Milo Milunovic using X-ray fluorescence, micro-Raman and FTIR spectroscopy" in Radiation Physics and Chemistry, 115 (2015):135-142,
https://doi.org/10.1016/j.radphyschem.2015.06.017 . .

TY  - CONF
AU  - Sandić, Zvijezdana
AU  - Momčilović, Milan Z.
AU  - Mirković, Marija D.
AU  - Radović, Magdalena
AU  - Stanković, Dragana
AU  - Suručić, Ljiljana T.
AU  - Maksin, Danijela D.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9229
AB  - Sorption of radioactive 99Tc-pertechnetate onto activated carbon prepared
from pinecones was investigated. The parameters of contact time and Tc-99
concentration were varied. It was established that the sorption half-life, t1/2,
was very short ~ 2.2 min, thus making this sorbent an excellent candidate
for immediate pollution remediation, which is very important in the case of
nuclear accidents. The kinetic data were found to follow closely the pseudosecond-
order (PSO) kinetic model. Boyd model established the sorption
dependence only on film diffusion. The partitioning/distribution coefficient,
Kd, attained was 2729 cm3 g-1. The equilibration time was 3 h at room
temperature (T=298 K).
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
T1  - Efficient separation of Tc-99 from aqueous solution using pinecone activated carbon
VL  - G-04-P
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9229
ER  - 

@conference{
author = "Sandić, Zvijezdana and Momčilović, Milan Z. and Mirković, Marija D. and Radović, Magdalena and Stanković, Dragana and Suručić, Ljiljana T. and Maksin, Danijela D.",
year = "2014",
abstract = "Sorption of radioactive 99Tc-pertechnetate onto activated carbon prepared
from pinecones was investigated. The parameters of contact time and Tc-99
concentration were varied. It was established that the sorption half-life, t1/2,
was very short ~ 2.2 min, thus making this sorbent an excellent candidate
for immediate pollution remediation, which is very important in the case of
nuclear accidents. The kinetic data were found to follow closely the pseudosecond-
order (PSO) kinetic model. Boyd model established the sorption
dependence only on film diffusion. The partitioning/distribution coefficient,
Kd, attained was 2729 cm3 g-1. The equilibration time was 3 h at room
temperature (T=298 K).",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry",
title = "Efficient separation of Tc-99 from aqueous solution using pinecone activated carbon",
volume = "G-04-P",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9229"
}

Sandić, Z., Momčilović, M. Z., Mirković, M. D., Radović, M., Stanković, D., Suručić, L. T.,& Maksin, D. D.. (2014). Efficient separation of Tc-99 from aqueous solution using pinecone activated carbon. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
Society of Physical Chemists of Serbia., G-04-P.
https://hdl.handle.net/21.15107/rcub_vinar_9229

Sandić Z, Momčilović MZ, Mirković MD, Radović M, Stanković D, Suručić LT, Maksin DD. Efficient separation of Tc-99 from aqueous solution using pinecone activated carbon. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry. 2014;G-04-P.
https://hdl.handle.net/21.15107/rcub_vinar_9229 .

Sandić, Zvijezdana, Momčilović, Milan Z., Mirković, Marija D., Radović, Magdalena, Stanković, Dragana, Suručić, Ljiljana T., Maksin, Danijela D., "Efficient separation of Tc-99 from aqueous solution using pinecone activated carbon" in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, G-04-P (2014),
https://hdl.handle.net/21.15107/rcub_vinar_9229 .

TY  - JOUR
AU  - Jovanović-Ćupić, Snežana P.
AU  - Glišić, Sanja
AU  - Stanojevic, M.
AU  - Vasiljević, N.
AU  - Bojić, Tijana
AU  - Božović, Ana M.
AU  - Dimitrijević, Bogomir B.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5858
AB  - Hepatitis C virus infection is the most common chronic blood-borne infection and one of the most important causes of chronic liver disease. Knowing the predictors associated with pegylated interferon/ribavirin (PEG-IFN/RBV) combination therapy response is important for evidence-based treatment recommendations. The goal of this study was to identify host and viral factors of response to PEG-IFN/RBV treatment in chronic hepatitis C genotype 1b patients. We have examined the relationship between gender, age, level of alanine aminotransferase (ALT), viral load and liver fibrosis progression on therapy response. ALT level and viral load were evaluated before starting treatment with combination therapy. The elevated levels of ALT and route of HCV transmission were found to be significantly associated with the response to therapy in HCV-infected patients. Our findings may be useful for estimating a patients likelihood Of achieving sustained viral response.
T2  - Archives of Biological Sciences
T1  - Response Factors to Pegylated Interferon-Alfa/Ribavirin Treatment in Chronic Hepatitis C Patients Genotype 1b
VL  - 66
IS  - 1
SP  - 193
EP  - 201
DO  - 10.2298/ABS1401193J
ER  - 

@article{
author = "Jovanović-Ćupić, Snežana P. and Glišić, Sanja and Stanojevic, M. and Vasiljević, N. and Bojić, Tijana and Božović, Ana M. and Dimitrijević, Bogomir B.",
year = "2014",
abstract = "Hepatitis C virus infection is the most common chronic blood-borne infection and one of the most important causes of chronic liver disease. Knowing the predictors associated with pegylated interferon/ribavirin (PEG-IFN/RBV) combination therapy response is important for evidence-based treatment recommendations. The goal of this study was to identify host and viral factors of response to PEG-IFN/RBV treatment in chronic hepatitis C genotype 1b patients. We have examined the relationship between gender, age, level of alanine aminotransferase (ALT), viral load and liver fibrosis progression on therapy response. ALT level and viral load were evaluated before starting treatment with combination therapy. The elevated levels of ALT and route of HCV transmission were found to be significantly associated with the response to therapy in HCV-infected patients. Our findings may be useful for estimating a patients likelihood Of achieving sustained viral response.",
journal = "Archives of Biological Sciences",
title = "Response Factors to Pegylated Interferon-Alfa/Ribavirin Treatment in Chronic Hepatitis C Patients Genotype 1b",
volume = "66",
number = "1",
pages = "193-201",
doi = "10.2298/ABS1401193J"
}

Jovanović-Ćupić, S. P., Glišić, S., Stanojevic, M., Vasiljević, N., Bojić, T., Božović, A. M.,& Dimitrijević, B. B.. (2014). Response Factors to Pegylated Interferon-Alfa/Ribavirin Treatment in Chronic Hepatitis C Patients Genotype 1b. in Archives of Biological Sciences, 66(1), 193-201.
https://doi.org/10.2298/ABS1401193J

Jovanović-Ćupić SP, Glišić S, Stanojevic M, Vasiljević N, Bojić T, Božović AM, Dimitrijević BB. Response Factors to Pegylated Interferon-Alfa/Ribavirin Treatment in Chronic Hepatitis C Patients Genotype 1b. in Archives of Biological Sciences. 2014;66(1):193-201.
doi:10.2298/ABS1401193J .

Jovanović-Ćupić, Snežana P., Glišić, Sanja, Stanojevic, M., Vasiljević, N., Bojić, Tijana, Božović, Ana M., Dimitrijević, Bogomir B., "Response Factors to Pegylated Interferon-Alfa/Ribavirin Treatment in Chronic Hepatitis C Patients Genotype 1b" in Archives of Biological Sciences, 66, no. 1 (2014):193-201,
https://doi.org/10.2298/ABS1401193J . .

TY  - CONF
AU  - Sandić, Zvijezdana
AU  - Maksin, Danijela D.
AU  - Nastasović, Aleksandra B.
AU  - Marković, Jelena P.
AU  - Hercigonja, Radmila V.
AU  - Milutinović, Slobodan M.
AU  - Onjia, Antonije E.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9244
AB  - In order to define the favorable conditions for radioactive technetium (99Tc) 
uptake, the sorption behavior of its non-active chemical analogue rhenium 
(
75Re) on amino-functionalized macroporous hydrophilic copolymer was 
studied. The pseudo-second-order (PSO) model provided the best fit for the 
kinetic data, while the intraparticle diffusion (IPD) model indicated a 
pronounced influence of the porous structure on the sorption rates. The 
maximum sorption capacity was found to be 84 mg g-1 and 74 % removal 
efficiency was reached after 180 min in citrate buffer at pH 5.0.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
T1  - Perrhenate sorption by amino-functionalized glycidyl methacrylate  copolymer: investigation of rhenium as an  analogue of radioactive technetium
VL  - J-16-P
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9244
ER  - 

@conference{
author = "Sandić, Zvijezdana and Maksin, Danijela D. and Nastasović, Aleksandra B. and Marković, Jelena P. and Hercigonja, Radmila V. and Milutinović, Slobodan M. and Onjia, Antonije E.",
year = "2014",
abstract = "In order to define the favorable conditions for radioactive technetium (99Tc) 
uptake, the sorption behavior of its non-active chemical analogue rhenium 
(
75Re) on amino-functionalized macroporous hydrophilic copolymer was 
studied. The pseudo-second-order (PSO) model provided the best fit for the 
kinetic data, while the intraparticle diffusion (IPD) model indicated a 
pronounced influence of the porous structure on the sorption rates. The 
maximum sorption capacity was found to be 84 mg g-1 and 74 % removal 
efficiency was reached after 180 min in citrate buffer at pH 5.0.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry",
title = "Perrhenate sorption by amino-functionalized glycidyl methacrylate  copolymer: investigation of rhenium as an  analogue of radioactive technetium",
volume = "J-16-P",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9244"
}

Sandić, Z., Maksin, D. D., Nastasović, A. B., Marković, J. P., Hercigonja, R. V., Milutinović, S. M.,& Onjia, A. E.. (2014). Perrhenate sorption by amino-functionalized glycidyl methacrylate  copolymer: investigation of rhenium as an  analogue of radioactive technetium. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
Society of Physical Chemists of Serbia., J-16-P.
https://hdl.handle.net/21.15107/rcub_vinar_9244

Sandić Z, Maksin DD, Nastasović AB, Marković JP, Hercigonja RV, Milutinović SM, Onjia AE. Perrhenate sorption by amino-functionalized glycidyl methacrylate  copolymer: investigation of rhenium as an  analogue of radioactive technetium. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry. 2014;J-16-P.
https://hdl.handle.net/21.15107/rcub_vinar_9244 .

Sandić, Zvijezdana, Maksin, Danijela D., Nastasović, Aleksandra B., Marković, Jelena P., Hercigonja, Radmila V., Milutinović, Slobodan M., Onjia, Antonije E., "Perrhenate sorption by amino-functionalized glycidyl methacrylate  copolymer: investigation of rhenium as an  analogue of radioactive technetium" in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, J-16-P (2014),
https://hdl.handle.net/21.15107/rcub_vinar_9244 .

TY  - CONF
AU  - Sandić, Zvijezdana
AU  - Marković, Darka
AU  - Novaković, Tatjana
AU  - Miladinović, Zoran
AU  - Hercigonja, Radmila V.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9245
AB  - Macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)
with attached diethylene triamine [PGME-deta] with high amino-group
content was used for the investigation of the Pd(II) sorption kinetics from
mixed chloride/nitrate aqueous solutions in acidic medium (pH 2.0) at
T=298 K. Four kinetic models were employed in order to comprehend the
mechanism of Pd(II) sorption. The maximum experimental Pd(II) sorption
capacity at initial pH 2.0 and 298 K was 20 mg g-1.
PB  - Society of Physical Chemists of Serbia
C3  - Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
T1  - Palladium sorption by aminofunctionalized macroporous copolymer from chloride–nitrate solutions
VL  - J-17-P
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9245
ER  - 

@conference{
author = "Sandić, Zvijezdana and Marković, Darka and Novaković, Tatjana and Miladinović, Zoran and Hercigonja, Radmila V.",
year = "2014",
abstract = "Macroporous poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)
with attached diethylene triamine [PGME-deta] with high amino-group
content was used for the investigation of the Pd(II) sorption kinetics from
mixed chloride/nitrate aqueous solutions in acidic medium (pH 2.0) at
T=298 K. Four kinetic models were employed in order to comprehend the
mechanism of Pd(II) sorption. The maximum experimental Pd(II) sorption
capacity at initial pH 2.0 and 298 K was 20 mg g-1.",
publisher = "Society of Physical Chemists of Serbia",
journal = "Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry",
title = "Palladium sorption by aminofunctionalized macroporous copolymer from chloride–nitrate solutions",
volume = "J-17-P",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9245"
}

Sandić, Z., Marković, D., Novaković, T., Miladinović, Z.,& Hercigonja, R. V.. (2014). Palladium sorption by aminofunctionalized macroporous copolymer from chloride–nitrate solutions. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry
Society of Physical Chemists of Serbia., J-17-P.
https://hdl.handle.net/21.15107/rcub_vinar_9245

Sandić Z, Marković D, Novaković T, Miladinović Z, Hercigonja RV. Palladium sorption by aminofunctionalized macroporous copolymer from chloride–nitrate solutions. in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry. 2014;J-17-P.
https://hdl.handle.net/21.15107/rcub_vinar_9245 .

Sandić, Zvijezdana, Marković, Darka, Novaković, Tatjana, Miladinović, Zoran, Hercigonja, Radmila V., "Palladium sorption by aminofunctionalized macroporous copolymer from chloride–nitrate solutions" in Physical chemistry 2014: 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry, J-17-P (2014),
https://hdl.handle.net/21.15107/rcub_vinar_9245 .