SAFU [KK.01.1.1.01.0001]

Link to this page

SAFU [KK.01.1.1.01.0001]

Authors

Publications

Mechanochemical pretreatment of ammonia borane: A new procedure for sodium amidoborane synthesis

Milanović, Igor; Biliškov, Nikola

(2020)

TY  - JOUR
AU  - Milanović, Igor
AU  - Biliškov, Nikola
PY  - 2020
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8564
AB  - The present work reports a new procedure for solid state synthesis of sodium amidoborane (NaAB) by mechanochemical (MC) reaction between as-received NaH and MC pretreated AB. Ball milling (BM) method was used for this purpose. First, pretreated AB was obtained by BM of as-received AB for 4.5 min. Second, powder of pretreated AB was mixed with as-received NaH and conducted to BM. Milling times were from 0 to 200 min: 5, 10, 30, 50, 100 and 200 min, respectively. By fixing the parameters of the milling conditions, only the influence of milling time on NaAB formation was followed. FTIR and XRD methods are used for analysis of powders after milling. We proved, by MC modification of pure AB, that the reaction rate between AB and NaH could be restricted to the interface between newly formed larger AB and small NaH particles. In such a way we obtained much better control of the reaction system with very accurate determination of reaction steps. Depending on the milling times, reaction process can be separated in three phases: i) 0–30 min phase - reactant and product are present; ii) 50–100 min phase - formed NaAB is almost without other pure; iii) 200 min phase - NaAB is totally decomposed. By this synthesis procedure we produced, for the first time, pure NaAB almost without any impurities. © 2019 Hydrogen Energy Publications LLC
T2  - International Journal of Hydrogen Energy
T1  - Mechanochemical pretreatment of ammonia borane: A new procedure for sodium amidoborane synthesis
VL  - 45
IS  - 14
SP  - 7938
EP  - 7946
DO  - 10.1016/j.ijhydene.2019.06.042
ER  - 
@article{
author = "Milanović, Igor and Biliškov, Nikola",
year = "2020",
abstract = "The present work reports a new procedure for solid state synthesis of sodium amidoborane (NaAB) by mechanochemical (MC) reaction between as-received NaH and MC pretreated AB. Ball milling (BM) method was used for this purpose. First, pretreated AB was obtained by BM of as-received AB for 4.5 min. Second, powder of pretreated AB was mixed with as-received NaH and conducted to BM. Milling times were from 0 to 200 min: 5, 10, 30, 50, 100 and 200 min, respectively. By fixing the parameters of the milling conditions, only the influence of milling time on NaAB formation was followed. FTIR and XRD methods are used for analysis of powders after milling. We proved, by MC modification of pure AB, that the reaction rate between AB and NaH could be restricted to the interface between newly formed larger AB and small NaH particles. In such a way we obtained much better control of the reaction system with very accurate determination of reaction steps. Depending on the milling times, reaction process can be separated in three phases: i) 0–30 min phase - reactant and product are present; ii) 50–100 min phase - formed NaAB is almost without other pure; iii) 200 min phase - NaAB is totally decomposed. By this synthesis procedure we produced, for the first time, pure NaAB almost without any impurities. © 2019 Hydrogen Energy Publications LLC",
journal = "International Journal of Hydrogen Energy",
title = "Mechanochemical pretreatment of ammonia borane: A new procedure for sodium amidoborane synthesis",
volume = "45",
number = "14",
pages = "7938-7946",
doi = "10.1016/j.ijhydene.2019.06.042"
}
Milanović, I.,& Biliškov, N.. (2020). Mechanochemical pretreatment of ammonia borane: A new procedure for sodium amidoborane synthesis. in International Journal of Hydrogen Energy, 45(14), 7938-7946.
https://doi.org/10.1016/j.ijhydene.2019.06.042
Milanović I, Biliškov N. Mechanochemical pretreatment of ammonia borane: A new procedure for sodium amidoborane synthesis. in International Journal of Hydrogen Energy. 2020;45(14):7938-7946.
doi:10.1016/j.ijhydene.2019.06.042 .
Milanović, Igor, Biliškov, Nikola, "Mechanochemical pretreatment of ammonia borane: A new procedure for sodium amidoborane synthesis" in International Journal of Hydrogen Energy, 45, no. 14 (2020):7938-7946,
https://doi.org/10.1016/j.ijhydene.2019.06.042 . .
4
3
4

Synthesis and Properties of Ni-doped Goethite and Ni-doped Hematite Nanorods

Krehula, Stjepko; Ristić, Mira; Mitar, Ivana; Wu, Chuchu; Li, Xuning; Jiang, Luhua; Wang, Junhu H.; Sun, Gongquan; Zhang, Tao; Perović, Marija M.; Bošković, Marko; Antić, Bratislav; Musić, Svetozar

(2018)

TY  - JOUR
AU  - Krehula, Stjepko
AU  - Ristić, Mira
AU  - Mitar, Ivana
AU  - Wu, Chuchu
AU  - Li, Xuning
AU  - Jiang, Luhua
AU  - Wang, Junhu H.
AU  - Sun, Gongquan
AU  - Zhang, Tao
AU  - Perović, Marija M.
AU  - Bošković, Marko
AU  - Antić, Bratislav
AU  - Musić, Svetozar
PY  - 2018
UR  - https://hrcak.srce.hr/file/309798
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8100
AB  - Ni-doped goethite (α-FeOOH) nanorods were synthesized from mixed Fe(III)-Ni(II) nitrate solutions with various Ni/(Ni+Fe) ratios (0, 5, 10, 20, 33 and 50 mol % Ni) by hydrothermal precipitation in a highly alkaline medium using the strong organic alkali, tetramethylammonium hydroxide (TMAH). Ni-doped hematite (α-Fe2O3) nanorods were obtained by calcination of Ni-doped goethite nanorods at 400 °C. The Ni 2+ -for-Fe 3+ substitution in goethite and hematite was confirmed by determination of the unit cell expansion (due to the difference in the ionic radii of Fe 3+ and Ni 2+ ) using XRPD and determination of the reduction of a hyperfine magnetic field (due to the difference in magnetic moments of Fe 3+ and Ni 2+ ) using Mössbauer spectroscopy. Single-phase goethite nanorods were found in samples containing 0 or 5 mol % Ni. A higher Ni content in the precipitation system (10 mol % or more) resulted in a higher Ni 2+ -for-Fe 3+ substitution in goethite, and larger Ni-doped goethite nanorods, though with the presence of low crystalline Ni-containing ferrihydrite and Ni ferrite (NiFe2O4) as additional phases. Significant changes in FT-IR and UV-Vis-NIR spectra of prepared samples were observed with increasing Ni content. Electrochemical measurements of samples showed a strong increase in oxygen evolution reaction (OER) electrocatalytic activity with increasing Ni content. © 2018 Croatian Chemical Society. All Rights Reserved.
T2  - Croatica Chemica Acta
T1  - Synthesis and Properties of Ni-doped Goethite and Ni-doped Hematite Nanorods
VL  - 91
IS  - 3
SP  - 389
EP  - 401
DO  - 10.5562/cca3402
ER  - 
@article{
author = "Krehula, Stjepko and Ristić, Mira and Mitar, Ivana and Wu, Chuchu and Li, Xuning and Jiang, Luhua and Wang, Junhu H. and Sun, Gongquan and Zhang, Tao and Perović, Marija M. and Bošković, Marko and Antić, Bratislav and Musić, Svetozar",
year = "2018",
abstract = "Ni-doped goethite (α-FeOOH) nanorods were synthesized from mixed Fe(III)-Ni(II) nitrate solutions with various Ni/(Ni+Fe) ratios (0, 5, 10, 20, 33 and 50 mol % Ni) by hydrothermal precipitation in a highly alkaline medium using the strong organic alkali, tetramethylammonium hydroxide (TMAH). Ni-doped hematite (α-Fe2O3) nanorods were obtained by calcination of Ni-doped goethite nanorods at 400 °C. The Ni 2+ -for-Fe 3+ substitution in goethite and hematite was confirmed by determination of the unit cell expansion (due to the difference in the ionic radii of Fe 3+ and Ni 2+ ) using XRPD and determination of the reduction of a hyperfine magnetic field (due to the difference in magnetic moments of Fe 3+ and Ni 2+ ) using Mössbauer spectroscopy. Single-phase goethite nanorods were found in samples containing 0 or 5 mol % Ni. A higher Ni content in the precipitation system (10 mol % or more) resulted in a higher Ni 2+ -for-Fe 3+ substitution in goethite, and larger Ni-doped goethite nanorods, though with the presence of low crystalline Ni-containing ferrihydrite and Ni ferrite (NiFe2O4) as additional phases. Significant changes in FT-IR and UV-Vis-NIR spectra of prepared samples were observed with increasing Ni content. Electrochemical measurements of samples showed a strong increase in oxygen evolution reaction (OER) electrocatalytic activity with increasing Ni content. © 2018 Croatian Chemical Society. All Rights Reserved.",
journal = "Croatica Chemica Acta",
title = "Synthesis and Properties of Ni-doped Goethite and Ni-doped Hematite Nanorods",
volume = "91",
number = "3",
pages = "389-401",
doi = "10.5562/cca3402"
}
Krehula, S., Ristić, M., Mitar, I., Wu, C., Li, X., Jiang, L., Wang, J. H., Sun, G., Zhang, T., Perović, M. M., Bošković, M., Antić, B.,& Musić, S.. (2018). Synthesis and Properties of Ni-doped Goethite and Ni-doped Hematite Nanorods. in Croatica Chemica Acta, 91(3), 389-401.
https://doi.org/10.5562/cca3402
Krehula S, Ristić M, Mitar I, Wu C, Li X, Jiang L, Wang JH, Sun G, Zhang T, Perović MM, Bošković M, Antić B, Musić S. Synthesis and Properties of Ni-doped Goethite and Ni-doped Hematite Nanorods. in Croatica Chemica Acta. 2018;91(3):389-401.
doi:10.5562/cca3402 .
Krehula, Stjepko, Ristić, Mira, Mitar, Ivana, Wu, Chuchu, Li, Xuning, Jiang, Luhua, Wang, Junhu H., Sun, Gongquan, Zhang, Tao, Perović, Marija M., Bošković, Marko, Antić, Bratislav, Musić, Svetozar, "Synthesis and Properties of Ni-doped Goethite and Ni-doped Hematite Nanorods" in Croatica Chemica Acta, 91, no. 3 (2018):389-401,
https://doi.org/10.5562/cca3402 . .
6
5
5