TY  - JOUR
AU  - Martinović, Biljana
AU  - Jelić, Ivana V.
AU  - Rikalović, Milena
AU  - Šljivić-Ivanović, Marija Z.
AU  - Radosavljević, Jelena
AU  - Kostić, Aleksandar Ž.
AU  - Adžemović, Mesud
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9640
AB  - The aim of the present study is the comparison of ambient pollution in working environment during infectious medical waste treatment in two relevant health care institutions in the Republic of Serbia - The Blood Transfusion Institute of Serbia and The Clinical Centre of Serbia by different sterilization methods (sterilizer-convertor and autoclave, respectively). Monitoring and analysis of the following chemical compounds were performed in both institutions: water vapor, carbon dioxide, carbon monoxide, hydrochloric acid, methane, ethane, propane, hexane, formaldehyde, benzene, toluene, m-xylene, phenol, acrolein, ethanol, ethyl acetate, ethylamine, ethylene oxide, methanol, dimethyl disulphide, dimethyl sulphide, ethyl mercaptan, methyl mercaptan, freon 11 (trichlorofluoromethane), carbonyl sulphide and hydrogen chloride. The determination of vapor-phase concentrations was done by extractive Fourier transform infrared spectroscopy. Monitoring of ambient pollution during infectious medical waste sterilization has shown that mercaptans, acrolein, formaldehyde, dimethyl sulphide, and ethylene oxide are emitted in both health institutions, in concentrations which are not permitted by regulations, while increased concentrations of hydrogen chloride and phenol were found in the Clinical Centre of Serbia. A comparison of ambient pollution with two different sterilization methods has shown that higher concentrations of pollutants are emitted at higher temperatures. Considering the fact that mentioned compounds exhibit high toxicity, hence represent the risk to air quality in working and living environment, i.e. represents a risk to human health it is necessary to revise and improve the existing treatment methods. © 2020 Parlar Scientific Publications. All rights reserved.
T2  - Fresenius Environmental Bulletin
T1  - Comparison of air pollution in the working environment during in site treatment of infectious medical waste by convertor and autoclave sterilization
VL  - 29
IS  - 4
SP  - 2160
EP  - 2165
UR  - https://hdl.handle.net/21.15107/rcub_vinar_9640
ER  - 

@article{
author = "Martinović, Biljana and Jelić, Ivana V. and Rikalović, Milena and Šljivić-Ivanović, Marija Z. and Radosavljević, Jelena and Kostić, Aleksandar Ž. and Adžemović, Mesud",
year = "2020",
abstract = "The aim of the present study is the comparison of ambient pollution in working environment during infectious medical waste treatment in two relevant health care institutions in the Republic of Serbia - The Blood Transfusion Institute of Serbia and The Clinical Centre of Serbia by different sterilization methods (sterilizer-convertor and autoclave, respectively). Monitoring and analysis of the following chemical compounds were performed in both institutions: water vapor, carbon dioxide, carbon monoxide, hydrochloric acid, methane, ethane, propane, hexane, formaldehyde, benzene, toluene, m-xylene, phenol, acrolein, ethanol, ethyl acetate, ethylamine, ethylene oxide, methanol, dimethyl disulphide, dimethyl sulphide, ethyl mercaptan, methyl mercaptan, freon 11 (trichlorofluoromethane), carbonyl sulphide and hydrogen chloride. The determination of vapor-phase concentrations was done by extractive Fourier transform infrared spectroscopy. Monitoring of ambient pollution during infectious medical waste sterilization has shown that mercaptans, acrolein, formaldehyde, dimethyl sulphide, and ethylene oxide are emitted in both health institutions, in concentrations which are not permitted by regulations, while increased concentrations of hydrogen chloride and phenol were found in the Clinical Centre of Serbia. A comparison of ambient pollution with two different sterilization methods has shown that higher concentrations of pollutants are emitted at higher temperatures. Considering the fact that mentioned compounds exhibit high toxicity, hence represent the risk to air quality in working and living environment, i.e. represents a risk to human health it is necessary to revise and improve the existing treatment methods. © 2020 Parlar Scientific Publications. All rights reserved.",
journal = "Fresenius Environmental Bulletin",
title = "Comparison of air pollution in the working environment during in site treatment of infectious medical waste by convertor and autoclave sterilization",
volume = "29",
number = "4",
pages = "2160-2165",
url = "https://hdl.handle.net/21.15107/rcub_vinar_9640"
}

Martinović, B., Jelić, I. V., Rikalović, M., Šljivić-Ivanović, M. Z., Radosavljević, J., Kostić, A. Ž.,& Adžemović, M.. (2020). Comparison of air pollution in the working environment during in site treatment of infectious medical waste by convertor and autoclave sterilization. in Fresenius Environmental Bulletin, 29(4), 2160-2165.
https://hdl.handle.net/21.15107/rcub_vinar_9640

Martinović B, Jelić IV, Rikalović M, Šljivić-Ivanović MZ, Radosavljević J, Kostić AŽ, Adžemović M. Comparison of air pollution in the working environment during in site treatment of infectious medical waste by convertor and autoclave sterilization. in Fresenius Environmental Bulletin. 2020;29(4):2160-2165.
https://hdl.handle.net/21.15107/rcub_vinar_9640 .

Martinović, Biljana, Jelić, Ivana V., Rikalović, Milena, Šljivić-Ivanović, Marija Z., Radosavljević, Jelena, Kostić, Aleksandar Ž., Adžemović, Mesud, "Comparison of air pollution in the working environment during in site treatment of infectious medical waste by convertor and autoclave sterilization" in Fresenius Environmental Bulletin, 29, no. 4 (2020):2160-2165,
https://hdl.handle.net/21.15107/rcub_vinar_9640 .

TY  - JOUR
AU  - Jelić, Ivana V.
AU  - Šljivić-Ivanović, Marija Z.
AU  - Dimović, Slavko
AU  - Antonijević, Dragi Lj.
AU  - Jović, Mihajlo D.
AU  - Vujović, Zoran
AU  - Smičiklas, Ivana D.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8611
AB  - The utilization of construction and demolition waste materials for the radionuclide immobilization by sorption processes was investigated. Given that the liquid radioactive waste usually has a complex composition and that effects of competition may significantly influence the efficiency of the treatment, the Simplex Centroid experimental design was used to explore ions sorption from multi-component solutions. For the purpose of this study, the common components of construction and demolition waste, such as pathway concrete and different bricks samples, were used along with the multi-component Sr2+, Co2+, and Ni2+ ions solutions. The equations for the prediction of metal ions sorption capacities were derived. The coefficients that correspond to the linear and interaction terms were obtained using a special cubic model. Likewise, by analysis of variance, statistically significant terms of the obtained polynomial were defined. The investigation has shown that the most effective sorption was onto the pathway concrete for all three cations, while the highest sorption capacity was found for Co2+ ions. Also, it has been determined that concerning Sr2+ ion removal there was a competition with coexisting Co2+ and Ni2+ ions, reducing its sorption capacity, while sorption of Co2+ and Ni2+ occurred more independently on other cations in multi-component solutions. Based on the obtained results, the applied experimental design can be efficiently used for the description of competitive sorption process and could be a powerful tool for the prediction of cation immobilization in liquid radioactive waste treatment.
T2  - Water, Air, and Soil Pollution
T1  - Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks—Experimental Design Methodology
VL  - 230
IS  - 10
SP  - 242
DO  - 10.1007/s11270-019-4298-3
ER  - 

@article{
author = "Jelić, Ivana V. and Šljivić-Ivanović, Marija Z. and Dimović, Slavko and Antonijević, Dragi Lj. and Jović, Mihajlo D. and Vujović, Zoran and Smičiklas, Ivana D.",
year = "2019",
abstract = "The utilization of construction and demolition waste materials for the radionuclide immobilization by sorption processes was investigated. Given that the liquid radioactive waste usually has a complex composition and that effects of competition may significantly influence the efficiency of the treatment, the Simplex Centroid experimental design was used to explore ions sorption from multi-component solutions. For the purpose of this study, the common components of construction and demolition waste, such as pathway concrete and different bricks samples, were used along with the multi-component Sr2+, Co2+, and Ni2+ ions solutions. The equations for the prediction of metal ions sorption capacities were derived. The coefficients that correspond to the linear and interaction terms were obtained using a special cubic model. Likewise, by analysis of variance, statistically significant terms of the obtained polynomial were defined. The investigation has shown that the most effective sorption was onto the pathway concrete for all three cations, while the highest sorption capacity was found for Co2+ ions. Also, it has been determined that concerning Sr2+ ion removal there was a competition with coexisting Co2+ and Ni2+ ions, reducing its sorption capacity, while sorption of Co2+ and Ni2+ occurred more independently on other cations in multi-component solutions. Based on the obtained results, the applied experimental design can be efficiently used for the description of competitive sorption process and could be a powerful tool for the prediction of cation immobilization in liquid radioactive waste treatment.",
journal = "Water, Air, and Soil Pollution",
title = "Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks—Experimental Design Methodology",
volume = "230",
number = "10",
pages = "242",
doi = "10.1007/s11270-019-4298-3"
}

Jelić, I. V., Šljivić-Ivanović, M. Z., Dimović, S., Antonijević, D. Lj., Jović, M. D., Vujović, Z.,& Smičiklas, I. D.. (2019). Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks—Experimental Design Methodology. in Water, Air, and Soil Pollution, 230(10), 242.
https://doi.org/10.1007/s11270-019-4298-3

Jelić IV, Šljivić-Ivanović MZ, Dimović S, Antonijević DL, Jović MD, Vujović Z, Smičiklas ID. Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks—Experimental Design Methodology. in Water, Air, and Soil Pollution. 2019;230(10):242.
doi:10.1007/s11270-019-4298-3 .

Jelić, Ivana V., Šljivić-Ivanović, Marija Z., Dimović, Slavko, Antonijević, Dragi Lj., Jović, Mihajlo D., Vujović, Zoran, Smičiklas, Ivana D., "Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks—Experimental Design Methodology" in Water, Air, and Soil Pollution, 230, no. 10 (2019):242,
https://doi.org/10.1007/s11270-019-4298-3 . .

TY  - CONF
AU  - Šljivić-Ivanović, Marija Z.
AU  - Jelić, Ivana V.
AU  - Dimović, Slavko
AU  - Jović, Mihajlo D.
AU  - Stanić, Vojislav
AU  - Smičiklas, Ivana D.
PY  - 2019
UR  - https://plus.sr.cobiss.net/opac7/bib/279687436
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8723
AB  - Otpadni cementni materijali (beton i fasada) su bazirani na kvarcu i kalcitu. Prvenstveno zahvaljujući kalcitu i baznom karakteru, ove matrice su pokazale visok afinitet prema jonima nikla. Ispitivanje uticaja početne koncentracije jona Ni u rastvoru na sorbovanu količinu omogućava definisanje sorpcionih izotermi. U ovom radu su prikazani rezultati matematičkog modelovanja izotermi Langmuir-ovim i Freundlich-ovim modelom. Langmuir-ov model znatno bolje opisuje eksperimentalne podatke dobijene za sorpciju na betonu, dok je sorpcija otpadnom fasadom bolje opisana Freundlich-ovom izotermom.
AB  - Waste cementous materials like concrete and facade are primary consisted of quartz and calcite minerals. As a consequence of calcite content as well as strong alkalinity, these matrices showed high sorption potential toward nickel ions. The investigation of initial Ni concentration effect onto sorbed amounts, enabled the sorption isotherm curves determination. In this paper are given results of mathematical modelling using Langmuir and Freundlich model. The better sorption data description was obtained using Langmuir model in the case of concrete sample, while, Freundlich model was more suitable for description of sorption onto facade.
PB  - Београд : Институт за нуклеарне науке "Винча" : Друштво за заштиту од зрачења Србије и Црне Горе
C3  - 30. симпозијум ДЗЗСЦГ : зборник радова
T1  - Modelovanje sorpcionih izotermi jona Ni(II) na otpadnim cementnim materijalima
T1  - Sorption isotherm modeling for Ni(II) sorption onto waste cementous materials
SP  - 567
EP  - 571
UR  - https://hdl.handle.net/21.15107/rcub_vinar_8723
ER  - 

@conference{
author = "Šljivić-Ivanović, Marija Z. and Jelić, Ivana V. and Dimović, Slavko and Jović, Mihajlo D. and Stanić, Vojislav and Smičiklas, Ivana D.",
year = "2019",
abstract = "Otpadni cementni materijali (beton i fasada) su bazirani na kvarcu i kalcitu. Prvenstveno zahvaljujući kalcitu i baznom karakteru, ove matrice su pokazale visok afinitet prema jonima nikla. Ispitivanje uticaja početne koncentracije jona Ni u rastvoru na sorbovanu količinu omogućava definisanje sorpcionih izotermi. U ovom radu su prikazani rezultati matematičkog modelovanja izotermi Langmuir-ovim i Freundlich-ovim modelom. Langmuir-ov model znatno bolje opisuje eksperimentalne podatke dobijene za sorpciju na betonu, dok je sorpcija otpadnom fasadom bolje opisana Freundlich-ovom izotermom., Waste cementous materials like concrete and facade are primary consisted of quartz and calcite minerals. As a consequence of calcite content as well as strong alkalinity, these matrices showed high sorption potential toward nickel ions. The investigation of initial Ni concentration effect onto sorbed amounts, enabled the sorption isotherm curves determination. In this paper are given results of mathematical modelling using Langmuir and Freundlich model. The better sorption data description was obtained using Langmuir model in the case of concrete sample, while, Freundlich model was more suitable for description of sorption onto facade.",
publisher = "Београд : Институт за нуклеарне науке "Винча" : Друштво за заштиту од зрачења Србије и Црне Горе",
journal = "30. симпозијум ДЗЗСЦГ : зборник радова",
title = "Modelovanje sorpcionih izotermi jona Ni(II) na otpadnim cementnim materijalima, Sorption isotherm modeling for Ni(II) sorption onto waste cementous materials",
pages = "567-571",
url = "https://hdl.handle.net/21.15107/rcub_vinar_8723"
}

Šljivić-Ivanović, M. Z., Jelić, I. V., Dimović, S., Jović, M. D., Stanić, V.,& Smičiklas, I. D.. (2019). Modelovanje sorpcionih izotermi jona Ni(II) na otpadnim cementnim materijalima. in 30. симпозијум ДЗЗСЦГ : зборник радова
Београд : Институт за нуклеарне науке "Винча" : Друштво за заштиту од зрачења Србије и Црне Горе., 567-571.
https://hdl.handle.net/21.15107/rcub_vinar_8723

Šljivić-Ivanović MZ, Jelić IV, Dimović S, Jović MD, Stanić V, Smičiklas ID. Modelovanje sorpcionih izotermi jona Ni(II) na otpadnim cementnim materijalima. in 30. симпозијум ДЗЗСЦГ : зборник радова. 2019;:567-571.
https://hdl.handle.net/21.15107/rcub_vinar_8723 .

Šljivić-Ivanović, Marija Z., Jelić, Ivana V., Dimović, Slavko, Jović, Mihajlo D., Stanić, Vojislav, Smičiklas, Ivana D., "Modelovanje sorpcionih izotermi jona Ni(II) na otpadnim cementnim materijalima" in 30. симпозијум ДЗЗСЦГ : зборник радова (2019):567-571,
https://hdl.handle.net/21.15107/rcub_vinar_8723 .

TY  - CONF
AU  - Jelić, Ivana
AU  - Bošnjaković, Jovana
AU  - Kostić, Aleksandar
AU  - Šljivić-Ivanović, Marija
AU  - Dimović, Slavko
AU  - Savić, Aleksandar R.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11209
AB  - The aim of this article is to review the utilization of various types of waste in geopolimerizationtechnology processes. The geopolymerization represents a process comprising of the dissolution of aluminosilicate solids in a strongly alkaline medium followed by condensation of free alumina-silica oligomers to form a tetrahedral polymeric structure. Advantage of this technology represents the possibility of utilization of any silica and alumina-containing waste material that could be dissolved in an alkaline solution. Production of geopolymers from waste not only provides less raw material consumption but also addresses issues regarding the disposal of wastes. Fly ash, red mud, construction and demolition waste (C&DW), slags, or mine waste are the most utilized waste types in combination with supplementary waste materials according to their characteristics. Conducted investigations showed that the use of various waste materials leads to the production of geopolymers with a broad range of final properties. Despite a high number of published Publications and patents, the large-scale utilization of waste is still missing.
PB  - University of Belgrade, Technical Faculty in Bor
C3  - Proceedings of the 51st International October Conference On Mining and Metallurgy
T1  - Utilization of Waste In Geopolimerization A Review
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11209
ER  - 

@conference{
author = "Jelić, Ivana and Bošnjaković, Jovana and Kostić, Aleksandar and Šljivić-Ivanović, Marija and Dimović, Slavko and Savić, Aleksandar R.",
year = "2019",
abstract = "The aim of this article is to review the utilization of various types of waste in geopolimerizationtechnology processes. The geopolymerization represents a process comprising of the dissolution of aluminosilicate solids in a strongly alkaline medium followed by condensation of free alumina-silica oligomers to form a tetrahedral polymeric structure. Advantage of this technology represents the possibility of utilization of any silica and alumina-containing waste material that could be dissolved in an alkaline solution. Production of geopolymers from waste not only provides less raw material consumption but also addresses issues regarding the disposal of wastes. Fly ash, red mud, construction and demolition waste (C&DW), slags, or mine waste are the most utilized waste types in combination with supplementary waste materials according to their characteristics. Conducted investigations showed that the use of various waste materials leads to the production of geopolymers with a broad range of final properties. Despite a high number of published Publications and patents, the large-scale utilization of waste is still missing.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "Proceedings of the 51st International October Conference On Mining and Metallurgy",
title = "Utilization of Waste In Geopolimerization A Review",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11209"
}

Jelić, I., Bošnjaković, J., Kostić, A., Šljivić-Ivanović, M., Dimović, S.,& Savić, A. R.. (2019). Utilization of Waste In Geopolimerization A Review. in Proceedings of the 51st International October Conference On Mining and Metallurgy
University of Belgrade, Technical Faculty in Bor..
https://hdl.handle.net/21.15107/rcub_vinar_11209

Jelić I, Bošnjaković J, Kostić A, Šljivić-Ivanović M, Dimović S, Savić AR. Utilization of Waste In Geopolimerization A Review. in Proceedings of the 51st International October Conference On Mining and Metallurgy. 2019;.
https://hdl.handle.net/21.15107/rcub_vinar_11209 .

Jelić, Ivana, Bošnjaković, Jovana, Kostić, Aleksandar, Šljivić-Ivanović, Marija, Dimović, Slavko, Savić, Aleksandar R., "Utilization of Waste In Geopolimerization A Review" in Proceedings of the 51st International October Conference On Mining and Metallurgy (2019),
https://hdl.handle.net/21.15107/rcub_vinar_11209 .

TY  - CONF
AU  - Šljivić-Ivanović, Marija Z.
AU  - Jelić, Ivana
AU  - Dimović, Slavko
AU  - Vujović, Zoran
AU  - Plećaš, Ilija
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11895
AB  - Informal settlements are human settlements which, for various reasons, do not fulfill the conditions for legal recognition. The large-scale informal construction has resulted in an unplanned expansion of zones around cities suburb, usurpation of agricultural and public land and huge development problems regarding social, traffic and communal infrastructure, as well as the environment. Informal settlements are usually connected to an electrical and telecommunication network, and rarely on the water supply network. The most serious problem is the lack of sewage systems (less than 30%) due to high costs, which is further associated with adverse environmental impacts. A similar situation occurs with garbage collection and storage. In many cases the common informal communal equipment exists, but below prescribed standards which often threaten the ecological and living conditions. During the rapid development when regions are facing economic changes and challenges arising from environmental threats, various institutions have adopted numerous planning documents. One of them is the EU Directive on Strategic Environmental Assessment (SEA). The SEA aims are regulation, i.e. legalization and improving informal settlements in the environmental and sustainable manner, as well as prevention of their future forming. The SEA is particularly relevant in the context of transition countries that a numerous strategies decisions are made with significant implications on the environment. Practically, all these countries have introduced SEA into their legal framework. National legislation relating to the environment usually are contained in one law (Environmental law), but in some states, the regulatory framework for environmental issues is very developed, as in Serbia by the several laws concerning the environment. A similar regulatory framework exists in Bosnia and Herzegovina (BiH), Macedonia and Bulgaria. The phenomenon of informal settlements is very noticeable in Montenegro, Turkey, BiH, Serbia, and Albania, while Slovenia, Bulgaria, and Moldova do not face any serious problems regarding this matter.
PB  - Belgrade : Association of Chemists and Chemical Engineers of Serbia (UHTS)
C3  - IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings
T1  - Impact of Informal Settlements on the Environment in Southeast Europe – A Review
SP  - 65
EP  - 71
DO  - 10.5281/zenodo.8348609
ER  - 

@conference{
author = "Šljivić-Ivanović, Marija Z. and Jelić, Ivana and Dimović, Slavko and Vujović, Zoran and Plećaš, Ilija",
year = "2019",
abstract = "Informal settlements are human settlements which, for various reasons, do not fulfill the conditions for legal recognition. The large-scale informal construction has resulted in an unplanned expansion of zones around cities suburb, usurpation of agricultural and public land and huge development problems regarding social, traffic and communal infrastructure, as well as the environment. Informal settlements are usually connected to an electrical and telecommunication network, and rarely on the water supply network. The most serious problem is the lack of sewage systems (less than 30%) due to high costs, which is further associated with adverse environmental impacts. A similar situation occurs with garbage collection and storage. In many cases the common informal communal equipment exists, but below prescribed standards which often threaten the ecological and living conditions. During the rapid development when regions are facing economic changes and challenges arising from environmental threats, various institutions have adopted numerous planning documents. One of them is the EU Directive on Strategic Environmental Assessment (SEA). The SEA aims are regulation, i.e. legalization and improving informal settlements in the environmental and sustainable manner, as well as prevention of their future forming. The SEA is particularly relevant in the context of transition countries that a numerous strategies decisions are made with significant implications on the environment. Practically, all these countries have introduced SEA into their legal framework. National legislation relating to the environment usually are contained in one law (Environmental law), but in some states, the regulatory framework for environmental issues is very developed, as in Serbia by the several laws concerning the environment. A similar regulatory framework exists in Bosnia and Herzegovina (BiH), Macedonia and Bulgaria. The phenomenon of informal settlements is very noticeable in Montenegro, Turkey, BiH, Serbia, and Albania, while Slovenia, Bulgaria, and Moldova do not face any serious problems regarding this matter.",
publisher = "Belgrade : Association of Chemists and Chemical Engineers of Serbia (UHTS)",
journal = "IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings",
title = "Impact of Informal Settlements on the Environment in Southeast Europe – A Review",
pages = "65-71",
doi = "10.5281/zenodo.8348609"
}

Šljivić-Ivanović, M. Z., Jelić, I., Dimović, S., Vujović, Z.,& Plećaš, I.. (2019). Impact of Informal Settlements on the Environment in Southeast Europe – A Review. in IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings
Belgrade : Association of Chemists and Chemical Engineers of Serbia (UHTS)., 65-71.
https://doi.org/10.5281/zenodo.8348609

Šljivić-Ivanović MZ, Jelić I, Dimović S, Vujović Z, Plećaš I. Impact of Informal Settlements on the Environment in Southeast Europe – A Review. in IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings. 2019;:65-71.
doi:10.5281/zenodo.8348609 .

Šljivić-Ivanović, Marija Z., Jelić, Ivana, Dimović, Slavko, Vujović, Zoran, Plećaš, Ilija, "Impact of Informal Settlements on the Environment in Southeast Europe – A Review" in IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings (2019):65-71,
https://doi.org/10.5281/zenodo.8348609 . .

TY  - CONF
AU  - Jelić, Ivana
AU  - Šljivić-Ivanović, Marija Z.
AU  - Dimović, Slavko
AU  - Vujović, Zoran
AU  - Plećaš, Ilija
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11896
AB  - This paper aims to summarize the main consequences of illegal building development for the environment. The negative factors of this phenomenon will be discussed according to the available literature data. The illegally built buildings often disrupt the human living environment or ruin the landscape, agricultural or forest land. Buildings without urban permits might have negative impacts on biodiversity, and create geomorphological and hydrological problems (e.g. landslides, disturbance of watercourses or groundwater flows, etc.), which further could lead to many accidents, i.e. floods or inadequate water supply, food chain disruption, and pest appearance. Buildings with poor energy efficiency performance have negative impacts regarding climate change, contribute to atmospheric pollution and overconsumption of natural resources, especially of fossil fuels. The negative impacts range from aesthetic deterioration of landscape, threats to biodiversity and soil degradation to increased vulnerability of human settlements and health, local water contamination or drying of households’ draw wells. Uncontrolled generation of waste during building construction and use, as well as its disposal, especially in urban areas, could have major negative environmental impacts.
PB  - Belgrade : Association of Chemists and Chemical Engineers of Serbia (UHTS)
C3  - IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings
T1  - The Consequences of Illegal Construction on the Environment
SP  - 72
EP  - 79
DO  - 10.5281/zenodo.8348597
ER  - 

@conference{
author = "Jelić, Ivana and Šljivić-Ivanović, Marija Z. and Dimović, Slavko and Vujović, Zoran and Plećaš, Ilija",
year = "2019",
abstract = "This paper aims to summarize the main consequences of illegal building development for the environment. The negative factors of this phenomenon will be discussed according to the available literature data. The illegally built buildings often disrupt the human living environment or ruin the landscape, agricultural or forest land. Buildings without urban permits might have negative impacts on biodiversity, and create geomorphological and hydrological problems (e.g. landslides, disturbance of watercourses or groundwater flows, etc.), which further could lead to many accidents, i.e. floods or inadequate water supply, food chain disruption, and pest appearance. Buildings with poor energy efficiency performance have negative impacts regarding climate change, contribute to atmospheric pollution and overconsumption of natural resources, especially of fossil fuels. The negative impacts range from aesthetic deterioration of landscape, threats to biodiversity and soil degradation to increased vulnerability of human settlements and health, local water contamination or drying of households’ draw wells. Uncontrolled generation of waste during building construction and use, as well as its disposal, especially in urban areas, could have major negative environmental impacts.",
publisher = "Belgrade : Association of Chemists and Chemical Engineers of Serbia (UHTS)",
journal = "IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings",
title = "The Consequences of Illegal Construction on the Environment",
pages = "72-79",
doi = "10.5281/zenodo.8348597"
}

Jelić, I., Šljivić-Ivanović, M. Z., Dimović, S., Vujović, Z.,& Plećaš, I.. (2019). The Consequences of Illegal Construction on the Environment. in IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings
Belgrade : Association of Chemists and Chemical Engineers of Serbia (UHTS)., 72-79.
https://doi.org/10.5281/zenodo.8348597

Jelić I, Šljivić-Ivanović MZ, Dimović S, Vujović Z, Plećaš I. The Consequences of Illegal Construction on the Environment. in IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings. 2019;:72-79.
doi:10.5281/zenodo.8348597 .

Jelić, Ivana, Šljivić-Ivanović, Marija Z., Dimović, Slavko, Vujović, Zoran, Plećaš, Ilija, "The Consequences of Illegal Construction on the Environment" in IMPEDE 2019 : International scientific conference Environmental impact of illegal construction, poor planning and design : Conference proceedings (2019):72-79,
https://doi.org/10.5281/zenodo.8348597 . .

TY  - JOUR
AU  - Zivkovic, D.
AU  - Strbac, N.
AU  - Sokic, M.
AU  - Andrić, Velibor
AU  - Jovanovic, I.
AU  - Jovicic, M.
AU  - Anđelić, B.
AU  - Radosavljevic, S.
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/184
AB  - Preliminary results of physicochemical investigation of some archaeometallurgical findings from Kmpije locality in vicinity of Bor (Serbia) are presented in this paper. Ancient samples of prehistoric origin were investigated using different instrumental analytic methods-chemical, differential thermal, X-ray diffraction, and energy dispersive X-ray fluorescence analysis. Obtained results indicate to the presence of ancient metallurgical activities, so locality Kmpije may be considered as an archaeometallurgical site, which should be investigated more in future for more precise details.
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia)
VL  - 118
IS  - 2
SP  - 1369
EP  - 1373
DO  - 10.1007/s10973-014-4050-6
ER  - 

@article{
author = "Zivkovic, D. and Strbac, N. and Sokic, M. and Andrić, Velibor and Jovanovic, I. and Jovicic, M. and Anđelić, B. and Radosavljevic, S.",
year = "2014",
abstract = "Preliminary results of physicochemical investigation of some archaeometallurgical findings from Kmpije locality in vicinity of Bor (Serbia) are presented in this paper. Ancient samples of prehistoric origin were investigated using different instrumental analytic methods-chemical, differential thermal, X-ray diffraction, and energy dispersive X-ray fluorescence analysis. Obtained results indicate to the presence of ancient metallurgical activities, so locality Kmpije may be considered as an archaeometallurgical site, which should be investigated more in future for more precise details.",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia)",
volume = "118",
number = "2",
pages = "1369-1373",
doi = "10.1007/s10973-014-4050-6"
}

Zivkovic, D., Strbac, N., Sokic, M., Andrić, V., Jovanovic, I., Jovicic, M., Anđelić, B.,& Radosavljevic, S.. (2014). Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia). in Journal of Thermal Analysis and Calorimetry, 118(2), 1369-1373.
https://doi.org/10.1007/s10973-014-4050-6

Zivkovic D, Strbac N, Sokic M, Andrić V, Jovanovic I, Jovicic M, Anđelić B, Radosavljevic S. Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia). in Journal of Thermal Analysis and Calorimetry. 2014;118(2):1369-1373.
doi:10.1007/s10973-014-4050-6 .

Zivkovic, D., Strbac, N., Sokic, M., Andrić, Velibor, Jovanovic, I., Jovicic, M., Anđelić, B., Radosavljevic, S., "Physicochemical investigation of some archaeometallurgical findings from locality Kmpije (Bor, Serbia)" in Journal of Thermal Analysis and Calorimetry, 118, no. 2 (2014):1369-1373,
https://doi.org/10.1007/s10973-014-4050-6 . .

TY  - JOUR
AU  - Nikolić, Vesna
AU  - Kamberović, Željko
AU  - Andić, Zoran
AU  - Korać, Marija
AU  - Sokić, Miroslav
AU  - Maksimović, Vesna
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/62
AB  - A method of synthesizing Ni-based catalysts supported on alpha-Al2O3-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides under an air atmosphere using an aerosol route. Separate procedures involved calcination to form oxides and drying to obtain chlorides on the foam surface. The synthesized samples were subsequently reduced with hydrogen. With respect to the Ni/Al2O3 catalysts, the chloride reduction route enabled the formation of a Ni coating without agglomerates or cracks. Further research included catalyst modification by the addition of Pd, Cu, and Fe. The influences of the additives on the degree of reduction and on the low-temperature reduction effectiveness (533 and 633 K) were examined and compared for the catalysts obtained from oxides and chlorides. Greater degrees of reduction were achieved with chlorides, whereas Pd was the most effective modifier among those investigated. The reduction process was nearly complete at 533 K in the sample that contained 0.1wt% Pd. A lower reduction temperature was utilized, and the calcination step was avoided, which may enhance the economical and technological aspects of the developed catalyst production method.
PB  - Springer Nature
T2  - International Journal of Minerals, Metallurgy and Materials
T1  - Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams
VL  - 21
IS  - 8
SP  - 806
EP  - 812
DO  - 10.1007/s12613-014-0974-x
ER  - 

@article{
author = "Nikolić, Vesna and Kamberović, Željko and Andić, Zoran and Korać, Marija and Sokić, Miroslav and Maksimović, Vesna",
year = "2014",
abstract = "A method of synthesizing Ni-based catalysts supported on alpha-Al2O3-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides under an air atmosphere using an aerosol route. Separate procedures involved calcination to form oxides and drying to obtain chlorides on the foam surface. The synthesized samples were subsequently reduced with hydrogen. With respect to the Ni/Al2O3 catalysts, the chloride reduction route enabled the formation of a Ni coating without agglomerates or cracks. Further research included catalyst modification by the addition of Pd, Cu, and Fe. The influences of the additives on the degree of reduction and on the low-temperature reduction effectiveness (533 and 633 K) were examined and compared for the catalysts obtained from oxides and chlorides. Greater degrees of reduction were achieved with chlorides, whereas Pd was the most effective modifier among those investigated. The reduction process was nearly complete at 533 K in the sample that contained 0.1wt% Pd. A lower reduction temperature was utilized, and the calcination step was avoided, which may enhance the economical and technological aspects of the developed catalyst production method.",
publisher = "Springer Nature",
journal = "International Journal of Minerals, Metallurgy and Materials",
title = "Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams",
volume = "21",
number = "8",
pages = "806-812",
doi = "10.1007/s12613-014-0974-x"
}

Nikolić, V., Kamberović, Ž., Andić, Z., Korać, M., Sokić, M.,& Maksimović, V.. (2014). Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams. in International Journal of Minerals, Metallurgy and Materials
Springer Nature., 21(8), 806-812.
https://doi.org/10.1007/s12613-014-0974-x

Nikolić V, Kamberović Ž, Andić Z, Korać M, Sokić M, Maksimović V. Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams. in International Journal of Minerals, Metallurgy and Materials. 2014;21(8):806-812.
doi:10.1007/s12613-014-0974-x .

Nikolić, Vesna, Kamberović, Željko, Andić, Zoran, Korać, Marija, Sokić, Miroslav, Maksimović, Vesna, "Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams" in International Journal of Minerals, Metallurgy and Materials, 21, no. 8 (2014):806-812,
https://doi.org/10.1007/s12613-014-0974-x . .