TY  - JOUR
AU  - Maksimović, Vesna
AU  - Pavlović, Ljubica J.
AU  - Pavlović, Miomir G.
AU  - Tomić, Milorad V.
PY  - 2009
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/3821
AB  - Technological properties of powders depend on their granulometry and morphology. Very often one method is inadequate for characterization of powder particles. This article studied different methods intended for clear definition of the copper powder granulometric and morphological properties. Quantitative microstructural analysis, sieve analysis, and XRD analysis of copper powder as well as scanning electron microscopy analysis of the copper powder particles were performed. It was determined that selected stereological parameters, such as area, perimeter, and shape factor (roundness) show a linear decreasing dependence of current density, while the morphology was changed from massive to branched 3D dendrites. XRD analysis indicated that the crystallite sizes shows a linearly increasing dependence on current density. The shape factor could be a useful parameter for description of powder morphologies deposited by different regimes.
T2  - Journal of Applied Electrochemistry
T1  - Characterization of copper powder particles obtained by electrodeposition as function of different current densities
VL  - 39
IS  - 12
SP  - 2545
EP  - 2552
DO  - 10.1007/s10800-009-9950-y
ER  - 

@article{
author = "Maksimović, Vesna and Pavlović, Ljubica J. and Pavlović, Miomir G. and Tomić, Milorad V.",
year = "2009",
abstract = "Technological properties of powders depend on their granulometry and morphology. Very often one method is inadequate for characterization of powder particles. This article studied different methods intended for clear definition of the copper powder granulometric and morphological properties. Quantitative microstructural analysis, sieve analysis, and XRD analysis of copper powder as well as scanning electron microscopy analysis of the copper powder particles were performed. It was determined that selected stereological parameters, such as area, perimeter, and shape factor (roundness) show a linear decreasing dependence of current density, while the morphology was changed from massive to branched 3D dendrites. XRD analysis indicated that the crystallite sizes shows a linearly increasing dependence on current density. The shape factor could be a useful parameter for description of powder morphologies deposited by different regimes.",
journal = "Journal of Applied Electrochemistry",
title = "Characterization of copper powder particles obtained by electrodeposition as function of different current densities",
volume = "39",
number = "12",
pages = "2545-2552",
doi = "10.1007/s10800-009-9950-y"
}

Maksimović, V., Pavlović, L. J., Pavlović, M. G.,& Tomić, M. V.. (2009). Characterization of copper powder particles obtained by electrodeposition as function of different current densities. in Journal of Applied Electrochemistry, 39(12), 2545-2552.
https://doi.org/10.1007/s10800-009-9950-y

Maksimović V, Pavlović LJ, Pavlović MG, Tomić MV. Characterization of copper powder particles obtained by electrodeposition as function of different current densities. in Journal of Applied Electrochemistry. 2009;39(12):2545-2552.
doi:10.1007/s10800-009-9950-y .

Maksimović, Vesna, Pavlović, Ljubica J., Pavlović, Miomir G., Tomić, Milorad V., "Characterization of copper powder particles obtained by electrodeposition as function of different current densities" in Journal of Applied Electrochemistry, 39, no. 12 (2009):2545-2552,
https://doi.org/10.1007/s10800-009-9950-y . .

TY  - JOUR
AU  - Maksimović, Vesna
AU  - Pavlović, Miomir G.
AU  - Pavlović, Ljubica J.
AU  - Tomić, Milorad V.
AU  - Jović, Vladimir D.
PY  - 2007
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2571
AB  - The effect of overpotential pulsing and periodic current reversal on the morphology of silver powders was investigated using a scanning electron microscope (SEM). It is shown that the profile of pulses or current reversal determines the micromorphology of the electrodeposited silver particles. Generally, three forms of silver were detected: (1) dendrites, (2) equiaxial crystals (independent and/or agglomerates) and (3) rods. The shape of particle seems to be the result of an interplay between the surface energy and growth kinetics.
T2  - Hydrometallurgy
T1  - Morphology and growth of electrodeposited silver powder particles
VL  - 86
IS  - 1-2
SP  - 22
EP  - 26
DO  - 10.1016/j.hydromet.2006.10.004
ER  - 

@article{
author = "Maksimović, Vesna and Pavlović, Miomir G. and Pavlović, Ljubica J. and Tomić, Milorad V. and Jović, Vladimir D.",
year = "2007",
abstract = "The effect of overpotential pulsing and periodic current reversal on the morphology of silver powders was investigated using a scanning electron microscope (SEM). It is shown that the profile of pulses or current reversal determines the micromorphology of the electrodeposited silver particles. Generally, three forms of silver were detected: (1) dendrites, (2) equiaxial crystals (independent and/or agglomerates) and (3) rods. The shape of particle seems to be the result of an interplay between the surface energy and growth kinetics.",
journal = "Hydrometallurgy",
title = "Morphology and growth of electrodeposited silver powder particles",
volume = "86",
number = "1-2",
pages = "22-26",
doi = "10.1016/j.hydromet.2006.10.004"
}

Maksimović, V., Pavlović, M. G., Pavlović, L. J., Tomić, M. V.,& Jović, V. D.. (2007). Morphology and growth of electrodeposited silver powder particles. in Hydrometallurgy, 86(1-2), 22-26.
https://doi.org/10.1016/j.hydromet.2006.10.004

Maksimović V, Pavlović MG, Pavlović LJ, Tomić MV, Jović VD. Morphology and growth of electrodeposited silver powder particles. in Hydrometallurgy. 2007;86(1-2):22-26.
doi:10.1016/j.hydromet.2006.10.004 .

Maksimović, Vesna, Pavlović, Miomir G., Pavlović, Ljubica J., Tomić, Milorad V., Jović, Vladimir D., "Morphology and growth of electrodeposited silver powder particles" in Hydrometallurgy, 86, no. 1-2 (2007):22-26,
https://doi.org/10.1016/j.hydromet.2006.10.004 . .