Mitrovic, N.

Link to this page

Authority KeyName Variants
orcid::0000-0002-7971-6321
  • Mitrovic, N. (1)
  • Mitrovic, Nebojsa (1)
Projects

Author's Bibliography

Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate

Filipovic, S.; Obradovic, N.; Pavlović, Vladimir B.; Kosanovic, D.; Mitrić, Miodrag; Mitrovic, N.; Pouchly, V.; Kachlik, M.; Maca, K.

(2014)

TY  - JOUR
AU  - Filipovic, S.
AU  - Obradovic, N.
AU  - Pavlović, Vladimir B.
AU  - Kosanovic, D.
AU  - Mitrić, Miodrag
AU  - Mitrovic, N.
AU  - Pouchly, V.
AU  - Kachlik, M.
AU  - Maca, K.
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/373
AB  - In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400 degrees C and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280 degrees C/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.
T2  - Science of Sintering
T1  - Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate
VL  - 46
IS  - 3
SP  - 283
EP  - 290
DO  - 10.2298/SOS1403283F
ER  - 
@article{
author = "Filipovic, S. and Obradovic, N. and Pavlović, Vladimir B. and Kosanovic, D. and Mitrić, Miodrag and Mitrovic, N. and Pouchly, V. and Kachlik, M. and Maca, K.",
year = "2014",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/373",
abstract = "In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400 degrees C and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280 degrees C/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.",
journal = "Science of Sintering",
title = "Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate",
volume = "46",
number = "3",
pages = "283-290",
doi = "10.2298/SOS1403283F"
}
Filipovic, S., Obradovic, N., Pavlović, V. B., Kosanovic, D., Mitrić, M., Mitrovic, N., Pouchly, V., Kachlik, M.,& Maca, K. (2014). Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate.
Science of Sintering, 46(3), 283-290.
https://doi.org/10.2298/SOS1403283F
Filipovic S, Obradovic N, Pavlović VB, Kosanovic D, Mitrić M, Mitrovic N, Pouchly V, Kachlik M, Maca K. Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate. Science of Sintering. 2014;46(3):283-290
Filipovic S., Obradovic N., Pavlović Vladimir B., Kosanovic D., Mitrić Miodrag, Mitrovic N., Pouchly V., Kachlik M., Maca K., "Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate" Science of Sintering, 46, no. 3 (2014):283-290,
https://doi.org/10.2298/SOS1403283F .
3
3
4

Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics

Obradovic, Nina; Mitrić, Miodrag; Nikolic, Maria Vesna; Minic, Dragica; Mitrovic, Nebojsa; Ristic, Momcilo M.

(2009)

TY  - JOUR
AU  - Obradovic, Nina
AU  - Mitrić, Miodrag
AU  - Nikolic, Maria Vesna
AU  - Minic, Dragica
AU  - Mitrovic, Nebojsa
AU  - Ristic, Momcilo M.
PY  - 2009
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/3674
AB  - Starting mixtures of ZnO, TiO(2) and MgO (0, 1.25 and 2.5 wt.% MgO) powders were mechanically activated for 15 min in a planetary ball mill. The powders obtained were sintered non-isothermally to temperatures between 800 and 1100 degrees C and then held at those temperatures for 120 min. Analysis of the influence of MgO addition on the synthesis of zinc-titanate ceramics showed that its addition increased slightly the temperature at which the reaction process started, accelerated the reaction and resulted in higher sample densities. These results were correlated with the results of structural characterization using X-ray powder diffraction method and SEM analysis. Also, the results of electric resistivity, capacitance and loss tangent of the sintered samples were obtained. (C) 2008 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics
VL  - 471
IS  - 1-2
SP  - 272
EP  - 277
DO  - 10.1016/j.jallcom.2008.03.090
ER  - 
@article{
author = "Obradovic, Nina and Mitrić, Miodrag and Nikolic, Maria Vesna and Minic, Dragica and Mitrovic, Nebojsa and Ristic, Momcilo M.",
year = "2009",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/3674",
abstract = "Starting mixtures of ZnO, TiO(2) and MgO (0, 1.25 and 2.5 wt.% MgO) powders were mechanically activated for 15 min in a planetary ball mill. The powders obtained were sintered non-isothermally to temperatures between 800 and 1100 degrees C and then held at those temperatures for 120 min. Analysis of the influence of MgO addition on the synthesis of zinc-titanate ceramics showed that its addition increased slightly the temperature at which the reaction process started, accelerated the reaction and resulted in higher sample densities. These results were correlated with the results of structural characterization using X-ray powder diffraction method and SEM analysis. Also, the results of electric resistivity, capacitance and loss tangent of the sintered samples were obtained. (C) 2008 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics",
volume = "471",
number = "1-2",
pages = "272-277",
doi = "10.1016/j.jallcom.2008.03.090"
}
Obradovic, N., Mitrić, M., Nikolic, M. V., Minic, D., Mitrovic, N.,& Ristic, M. M. (2009). Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics.
Journal of Alloys and Compounds, 471(1-2), 272-277.
https://doi.org/10.1016/j.jallcom.2008.03.090
Obradovic N, Mitrić M, Nikolic MV, Minic D, Mitrovic N, Ristic MM. Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics. Journal of Alloys and Compounds. 2009;471(1-2):272-277
Obradovic Nina, Mitrić Miodrag, Nikolic Maria Vesna, Minic Dragica, Mitrovic Nebojsa, Ristic Momcilo M., "Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics" Journal of Alloys and Compounds, 471, no. 1-2 (2009):272-277,
https://doi.org/10.1016/j.jallcom.2008.03.090 .
3
12
12
15