Pavlović, Vera P.

Link to this page

Authority KeyName Variants
orcid::0000-0002-1802-1796
  • Pavlović, Vera P. (26)
Projects
Directed synthesis, structure and properties of multifunctional materials Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites
Synthesis, processing and applications of nanostructured multifunctional materials with defined properties Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion
Bilateral cooperation between Serbia and France [4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites”] ERC advanced grant “PICOPROP” [670918]
Investigation of intermetallics and semiconductors and possible application in renewable energy sources Geologic and ecotoxicologic research in identification of geopathogen zones of toxic elements in drinking water reservoirs- research into methods and procedures for reduction of biochemical anomalies
NASA (NNX09AV07A) NASA [NNX09AV07A]
NASA: NNX09AV07A National Science Foundation, North Carolina State University [DMR-1523617]
National Science Foundation, North Carolina State University [HRD-1345219] NSF CREST (HRD-0833184)
NSF CREST [HRD-0833184] Swiss National Science Foundation [160169]
United States National Aeronautics and Space Administration (NASA), Grant NNX09AV07A United States National Science Foundation (NSF) / Centers of Research Excellence in Science and Technology (CREST), Grant HRD-0833184
United States National Science Foundation (NSF) / Partnerships for Research and Education in Materials (PREM), Grant 1523617 AIT grant
Investigation of the effect of parameters of synthesis and processing on dielectric, optical and magnetic properties, both bulk and surface of crystal and polymeric systems MBR Global Water Initiatives
NSF CREST [HRD-0833184], NASA [NNX09AV07A], Serbian Academy of Science and Arts [F/198] NSF CREST [HRD0833184], NASA [NNX09AVO7A]
NSF [HRD0833184], NASA [NNX09AVO7A] [NSF-PREM1523617]
NSF-PREM [1523617] project NSF CREST [HRD-0833184], project NASA [NNX09AV07A]
project NSF CREST [HRD-0833184], project NASA [NNX09AV07A], National Research Foundation in South Africa Serbian Academy of Science and Arts [F/198]

Author's Bibliography

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko R.; Popović, Maja; Rakočević, Zlatko Lj.; Horvath, Endre; Kollar, Marton; Nafradi, Balint; Schiller, Andreas; Domanski, Konrad; Forro, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe T.

(2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko R.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Horvath, Endre
AU  - Kollar, Marton
AU  - Nafradi, Balint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forro, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe T.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8538
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
VL  - 45
IS  - 8
SP  - 10013
EP  - 10020
DO  - 10.1016/j.ceramint.2019.02.045
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko R. and Popović, Maja and Rakočević, Zlatko Lj. and Horvath, Endre and Kollar, Marton and Nafradi, Balint and Schiller, Andreas and Domanski, Konrad and Forro, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe T.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8538",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
volume = "45",
number = "8",
pages = "10013-10020",
doi = "10.1016/j.ceramint.2019.02.045"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V. R., Popović, M., Rakočević, Z. Lj., Horvath, E., Kollar, M., Nafradi, B., Schiller, A., Domanski, K., Forro, L., Pavlović, V. P.,& Janaćković, Đ. T. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping.
Ceramics International, 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
Vujančević J, Andričević P, Bjelajac A, Đokić VR, Popović M, Rakočević ZL, Horvath E, Kollar M, Nafradi B, Schiller A, Domanski K, Forro L, Pavlović VP, Janaćković ĐT. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International. 2019;45(8):10013-10020
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko R., Popović Maja, Rakočević Zlatko Lj., Horvath Endre, Kollar Marton, Nafradi Balint, Schiller Andreas, Domanski Konrad, Forro Laszlo, Pavlović Vera P., Janaćković Đorđe T., "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .
3
2
1

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko R.; Popović, Maja; Rakočević, Zlatko Lj.; Horvath, Endre; Kollar, Marton; Nafradi, Balint; Schiller, Andreas; Domanski, Konrad; Forro, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe T.

(2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko R.
AU  - Popović, Maja
AU  - Rakočević, Zlatko Lj.
AU  - Horvath, Endre
AU  - Kollar, Marton
AU  - Nafradi, Balint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forro, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe T.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8539
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
VL  - 45
IS  - 8
SP  - 10013
EP  - 10020
DO  - 10.1016/j.ceramint.2019.02.045
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko R. and Popović, Maja and Rakočević, Zlatko Lj. and Horvath, Endre and Kollar, Marton and Nafradi, Balint and Schiller, Andreas and Domanski, Konrad and Forro, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe T.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8539",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
volume = "45",
number = "8",
pages = "10013-10020",
doi = "10.1016/j.ceramint.2019.02.045"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V. R., Popović, M., Rakočević, Z. Lj., Horvath, E., Kollar, M., Nafradi, B., Schiller, A., Domanski, K., Forro, L., Pavlović, V. P.,& Janaćković, Đ. T. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping.
Ceramics International, 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
Vujančević J, Andričević P, Bjelajac A, Đokić VR, Popović M, Rakočević ZL, Horvath E, Kollar M, Nafradi B, Schiller A, Domanski K, Forro L, Pavlović VP, Janaćković ĐT. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International. 2019;45(8):10013-10020
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko R., Popović Maja, Rakočević Zlatko Lj., Horvath Endre, Kollar Marton, Nafradi Balint, Schiller Andreas, Domanski Konrad, Forro Laszlo, Pavlović Vera P., Janaćković Đorđe T., "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .
3
2
1

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle Z.; Ćirković, Jovana; Papan, Jelena; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle Z.
AU  - Ćirković, Jovana
AU  - Papan, Jelena
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8384
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
VL  - 102
IS  - 12
SP  - 7735
EP  - 7745
DO  - 10.1111/jace.16668
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle Z. and Ćirković, Jovana and Papan, Jelena and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8384",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
volume = "102",
number = "12",
pages = "7735-7745",
doi = "10.1111/jace.16668"
}
Pavlović, V. P., Vujančević, J., Mašković, P. Z., Ćirković, J., Papan, J., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic Society, 102(12), 7735-7745.
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković PZ, Ćirković J, Papan J, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745
Pavlović Vera P., Vujančević Jelena, Mašković Pavle Z., Ćirković Jovana, Papan Jelena, Kosanović Darko, Dramićanin Miroslav, Petrović Predrag B., Vlahović Branislav, Pavlović Vladimir B., "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2" Journal of the American Ceramic Society, 102, no. 12 (2019):7735-7745,
https://doi.org/10.1111/jace.16668 .
7
2
2

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle Z.; Ćirković, Jovana; Papan, Jelena; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle Z.
AU  - Ćirković, Jovana
AU  - Papan, Jelena
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8380
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
VL  - 102
IS  - 12
SP  - 7735
EP  - 7745
DO  - 10.1111/jace.16668
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle Z. and Ćirković, Jovana and Papan, Jelena and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8380",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
volume = "102",
number = "12",
pages = "7735-7745",
doi = "10.1111/jace.16668"
}
Pavlović, V. P., Vujančević, J., Mašković, P. Z., Ćirković, J., Papan, J., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic Society, 102(12), 7735-7745.
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković PZ, Ćirković J, Papan J, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745
Pavlović Vera P., Vujančević Jelena, Mašković Pavle Z., Ćirković Jovana, Papan Jelena, Kosanović Darko, Dramićanin Miroslav, Petrović Predrag B., Vlahović Branislav, Pavlović Vladimir B., "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2" Journal of the American Ceramic Society, 102, no. 12 (2019):7735-7745,
https://doi.org/10.1111/jace.16668 .
7
2
2

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena D.; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8101
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
VL  - 26
IS  - 12
SP  - 12379
EP  - 12398
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena D. and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8101",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
volume = "26",
number = "12",
pages = "12379-12398",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J. D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution Research, 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović JD, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398
Rusmirović Jelena D., Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera P., Marinković Aleksandar D., Pavlović Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .
1
4
6
6

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8103
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
VL  - 8
IS  - 1
SP  - 133
EP  - 147
DO  - 10.1007/s40145-018-0301-5
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
url = "https://doi.org/10.1007/s40145-018-0301-5, http://vinar.vin.bg.ac.rs/handle/123456789/8103",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
volume = "8",
number = "1",
pages = "133-147",
doi = "10.1007/s40145-018-0301-5"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure.
Journal of Advanced Ceramics, 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. Journal of Advanced Ceramics. 2019;8(1):133-147
Filipović Suzana, Pavlović Vera P., Mitrić Miodrag, Lević Steva, Mitrović Nebojša, Maričić Aleksa, Vlahović Branislav, Pavlović Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 .
1
4
3
6

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena D.; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/8096
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-?-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g -1 for WL-?-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g -1 for Cd 2+ , Ni 2+ , phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-?-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-?-APS. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
VL  - 26
IS  - 12
SP  - 12379
EP  - 12398
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena D. and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/8096",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-?-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g -1 for WL-?-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g -1 for Cd 2+ , Ni 2+ , phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-?-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-?-APS. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
volume = "26",
number = "12",
pages = "12379-12398",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J. D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution Research, 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović JD, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398
Rusmirović Jelena D., Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera P., Marinković Aleksandar D., Pavlović Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .
4
6
6

Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films

Peleš, Adriana; Aleksić, Obrad S.; Pavlović, Vera P.; Đoković, Vladimir; Dojčilović, Radovan; Nikolić, Zoran M.; Marinković, Filip S.; Mitrić, Miodrag; Blagojević, Vladimir D.; Vlahović, Branislav; Pavlović, Vladimir B.

(2018)

TY  - JOUR
AU  - Peleš, Adriana
AU  - Aleksić, Obrad S.
AU  - Pavlović, Vera P.
AU  - Đoković, Vladimir
AU  - Dojčilović, Radovan
AU  - Nikolić, Zoran M.
AU  - Marinković, Filip S.
AU  - Mitrić, Miodrag
AU  - Blagojević, Vladimir D.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://stacks.iop.org/1402-4896/93/i=10/a=105801?key=crossref.54536d8babe95dbc820e50211f592252
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7898
AB  - The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the γ-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of α-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of β-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric β-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of β-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles. © 2018 IOP Publishing Ltd.
T2  - Physica Scripta
T1  - Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films
VL  - 93
IS  - 10
SP  - 105801
DO  - 10.1088/1402-4896/aad749
ER  - 
@article{
author = "Peleš, Adriana and Aleksić, Obrad S. and Pavlović, Vera P. and Đoković, Vladimir and Dojčilović, Radovan and Nikolić, Zoran M. and Marinković, Filip S. and Mitrić, Miodrag and Blagojević, Vladimir D. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2018",
url = "http://stacks.iop.org/1402-4896/93/i=10/a=105801?key=crossref.54536d8babe95dbc820e50211f592252, http://vinar.vin.bg.ac.rs/handle/123456789/7898",
abstract = "The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the γ-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of α-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of β-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric β-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of β-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles. © 2018 IOP Publishing Ltd.",
journal = "Physica Scripta",
title = "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films",
volume = "93",
number = "10",
pages = "105801",
doi = "10.1088/1402-4896/aad749"
}
Peleš, A., Aleksić, O. S., Pavlović, V. P., Đoković, V., Dojčilović, R., Nikolić, Z. M., Marinković, F. S., Mitrić, M., Blagojević, V. D., Vlahović, B.,& Pavlović, V. B. (2018). Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films.
Physica Scripta, 93(10), 105801.
https://doi.org/10.1088/1402-4896/aad749
Peleš A, Aleksić OS, Pavlović VP, Đoković V, Dojčilović R, Nikolić ZM, Marinković FS, Mitrić M, Blagojević VD, Vlahović B, Pavlović VB. Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films. Physica Scripta. 2018;93(10):105801
Peleš Adriana, Aleksić Obrad S., Pavlović Vera P., Đoković Vladimir, Dojčilović Radovan, Nikolić Zoran M., Marinković Filip S., Mitrić Miodrag, Blagojević Vladimir D., Vlahović Branislav, Pavlović Vladimir B., "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films" Physica Scripta, 93, no. 10 (2018):105801,
https://doi.org/10.1088/1402-4896/aad749 .
1
9
4
8

DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells

Dojčilović, Radovan; Pajović, Jelena D.; Božanić, Dušan K.; Jović, Nataša G.; Pavlović, Vera P.; Pavlović, Vladimir B.; Lenhardt Acković, Lea; Zeković, Ivana Lj.; Dramićanin, Miroslav; Kaščakova, Slavka; Refregiers, Matthieu; Rašić, Goran; Vlahović, Branislav; Đoković, Vladimir

(2018)

TY  - JOUR
AU  - Dojčilović, Radovan
AU  - Pajović, Jelena D.
AU  - Božanić, Dušan K.
AU  - Jović, Nataša G.
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Lenhardt Acković, Lea
AU  - Zeković, Ivana Lj.
AU  - Dramićanin, Miroslav
AU  - Kaščakova, Slavka
AU  - Refregiers, Matthieu
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2018
UR  - http://stacks.iop.org/2053-1583/5/i=4/a=045019?key=crossref.f455f07bdfb3469c8077963ff0f38f95
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7909
AB  - The interaction of partially reduced graphene oxide (prGO) and Huh7.5.1 liver cancer cells was investigated by means of DUV fluorescence bioimaging. The prGO sample was obtained by the reduction (to a certain extent) of the initially prepared graphene oxide (GO) nanosheets with hydrazine. The fluorescence of the GO nanosheets increases with time of the reduction due to a change in ratio of the sp2 and sp3 carbon sites and the prGO sample was extracted from the dispersion after 6 min, when the intensity of the fluorescence reached its maximum. The reduction process was left to proceed further to saturation until highly reduced graphene oxide (denoted here as rGO) was obtained. GO, prGO and rGO samples were investigated by structural (scanning electron microscopy (SEM), scanning transmission electron microscopy coupled with energy dispersive spectrometry (STEM-EDS)) and spectroscopic (UV-vis, photoluminescence (PL), Raman) methods. After that, Huh7.5.1 cells were incubated with GO, prGO and rGO nanosheets and used in bioimaging studies, which were performed on DISCO beamline of synchrotron SOLEIL. It was found that the prGO significantly enhanced the fluorescence of the cells and increased the intensity of the signal by ~2.5 times. Time-lapse fluorescence microscopy experiments showed that fluorescence dynamics strongly depends on the type of nanosheets used. The obtained prGO nanostructure can be easily conjugated with aromatic ring containing drugs, which opens a possibility for its applications in fluorescence microscopy monitored drug delivery. © 2018 IOP Publishing Ltd.
T2  - 2D Materials
T1  - DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells
VL  - 5
IS  - 4
SP  - 045019
DO  - 10.1088/2053-1583/aad72b
ER  - 
@article{
author = "Dojčilović, Radovan and Pajović, Jelena D. and Božanić, Dušan K. and Jović, Nataša G. and Pavlović, Vera P. and Pavlović, Vladimir B. and Lenhardt Acković, Lea and Zeković, Ivana Lj. and Dramićanin, Miroslav and Kaščakova, Slavka and Refregiers, Matthieu and Rašić, Goran and Vlahović, Branislav and Đoković, Vladimir",
year = "2018",
url = "http://stacks.iop.org/2053-1583/5/i=4/a=045019?key=crossref.f455f07bdfb3469c8077963ff0f38f95, http://vinar.vin.bg.ac.rs/handle/123456789/7909",
abstract = "The interaction of partially reduced graphene oxide (prGO) and Huh7.5.1 liver cancer cells was investigated by means of DUV fluorescence bioimaging. The prGO sample was obtained by the reduction (to a certain extent) of the initially prepared graphene oxide (GO) nanosheets with hydrazine. The fluorescence of the GO nanosheets increases with time of the reduction due to a change in ratio of the sp2 and sp3 carbon sites and the prGO sample was extracted from the dispersion after 6 min, when the intensity of the fluorescence reached its maximum. The reduction process was left to proceed further to saturation until highly reduced graphene oxide (denoted here as rGO) was obtained. GO, prGO and rGO samples were investigated by structural (scanning electron microscopy (SEM), scanning transmission electron microscopy coupled with energy dispersive spectrometry (STEM-EDS)) and spectroscopic (UV-vis, photoluminescence (PL), Raman) methods. After that, Huh7.5.1 cells were incubated with GO, prGO and rGO nanosheets and used in bioimaging studies, which were performed on DISCO beamline of synchrotron SOLEIL. It was found that the prGO significantly enhanced the fluorescence of the cells and increased the intensity of the signal by ~2.5 times. Time-lapse fluorescence microscopy experiments showed that fluorescence dynamics strongly depends on the type of nanosheets used. The obtained prGO nanostructure can be easily conjugated with aromatic ring containing drugs, which opens a possibility for its applications in fluorescence microscopy monitored drug delivery. © 2018 IOP Publishing Ltd.",
journal = "2D Materials",
title = "DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells",
volume = "5",
number = "4",
pages = "045019",
doi = "10.1088/2053-1583/aad72b"
}
Dojčilović, R., Pajović, J. D., Božanić, D. K., Jović, N. G., Pavlović, V. P., Pavlović, V. B., Lenhardt Acković, L., Zeković, I. Lj., Dramićanin, M., Kaščakova, S., Refregiers, M., Rašić, G., Vlahović, B.,& Đoković, V. (2018). DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells.
2D Materials, 5(4), 045019.
https://doi.org/10.1088/2053-1583/aad72b
Dojčilović R, Pajović JD, Božanić DK, Jović NG, Pavlović VP, Pavlović VB, Lenhardt Acković L, Zeković IL, Dramićanin M, Kaščakova S, Refregiers M, Rašić G, Vlahović B, Đoković V. DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells. 2D Materials. 2018;5(4):045019
Dojčilović Radovan, Pajović Jelena D., Božanić Dušan K., Jović Nataša G., Pavlović Vera P., Pavlović Vladimir B., Lenhardt Acković Lea, Zeković Ivana Lj., Dramićanin Miroslav, Kaščakova Slavka, Refregiers Matthieu, Rašić Goran, Vlahović Branislav, Đoković Vladimir, "DUV fluorescence bioimaging study of the interaction of partially reduced graphene oxide and liver cancer cells" 2D Materials, 5, no. 4 (2018):045019,
https://doi.org/10.1088/2053-1583/aad72b .
5

Structure and photocatalytic properties of sintered TiO2 nanotube arrays

Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horvath, Endre; Forro, Laszlo; Vlahović, Branislav; Mitrić, Miodrag; Janaćković, Đorđe T.; Pavlović, Vladimir B.

(2018)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horvath, Endre
AU  - Forro, Laszlo
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://www.doiserbia.nb.rs/Article.aspx?ID=0350-820X1801039V
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7651
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
VL  - 50
IS  - 1
SP  - 39
EP  - 50
DO  - 10.2298/SOS1801039V
ER  - 
@article{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forro, Laszlo and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe T. and Pavlović, Vladimir B.",
year = "2018",
url = "https://www.doiserbia.nb.rs/Article.aspx?ID=0350-820X1801039V, http://vinar.vin.bg.ac.rs/handle/123456789/7651",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.",
journal = "Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
volume = "50",
number = "1",
pages = "39-50",
doi = "10.2298/SOS1801039V"
}
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forro, L., Vlahović, B., Mitrić, M., Janaćković, Đ. T.,& Pavlović, V. B. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays.
Science of Sintering, 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forro L, Vlahović B, Mitrić M, Janaćković ĐT, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. Science of Sintering. 2018;50(1):39-50
Vujančević Jelena, Bjelajac Anđelika, Ćirković Jovana, Pavlović Vera P., Horvath Endre, Forro Laszlo, Vlahović Branislav, Mitrić Miodrag, Janaćković Đorđe T., Pavlović Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" Science of Sintering, 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V .
5
6
7

Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization

Brkovic, Danijela V.; Pavlović, Vladimir B.; Pavlović, Vera P.; Obradovic, Nina; Mitrić, Miodrag; Stevanovic, Sanja; Vlahović, Branislav; Uskokovic, Petar S.; Marinković, Aleksandar D.

(2017)

TY  - JOUR
AU  - Brkovic, Danijela V.
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Obradovic, Nina
AU  - Mitrić, Miodrag
AU  - Stevanovic, Sanja
AU  - Vlahović, Branislav
AU  - Uskokovic, Petar S.
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/1753
AB  - The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. Different functional groups have been covalently attached on the MWCNTs sidewalls in order to induce interfacial interactions at nanofiller/polymer interface, which resulted in an improved nanomechanical features. Structural properties of nanocomposites, studied with XRD and Raman analysis, indicated the most pronounced decrease in a degree of amorphousness for samples containing 0.5 and 1 wt% of MWCNTs functionalized with dapsone (dapson-MWCNT) and diethyl malonate (dem-MWCNT). SEM and TEM micrographs confirmed improved dispersibility of the MWCNTs modified with aromatic structure of dapsone inside PMMA matrix. A significant increase in a glass transition temperature of over 60 degrees C has been found for the 1 wt% dapson-MWCNT nanocomposite. Additional modification of dapson-MWCNT by further increasing aromaticity and voluminosity of attached moiety (fid-MWCNT), showed 30 degrees C increases in a glass transition temperature at 4 wt% of nanofiller loading, which is similar to shift of 37 degrees C with loading of MWCNTs modified with ester terminal group. A maximum increase of 56% of reduced modulus and 86% of hardness was obtained for 1 wt% loading of dapson-MWCNT nanofiller. (C) 2016 Society of Plastics Engineers
T2  - Polymer Composites
T1  - Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization
VL  - 38
IS  - SI
SP  - E472
EP  - E489
DO  - 10.1002/pc.23996
ER  - 
@article{
author = "Brkovic, Danijela V. and Pavlović, Vladimir B. and Pavlović, Vera P. and Obradovic, Nina and Mitrić, Miodrag and Stevanovic, Sanja and Vlahović, Branislav and Uskokovic, Petar S. and Marinković, Aleksandar D.",
year = "2017",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/1753",
abstract = "The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. Different functional groups have been covalently attached on the MWCNTs sidewalls in order to induce interfacial interactions at nanofiller/polymer interface, which resulted in an improved nanomechanical features. Structural properties of nanocomposites, studied with XRD and Raman analysis, indicated the most pronounced decrease in a degree of amorphousness for samples containing 0.5 and 1 wt% of MWCNTs functionalized with dapsone (dapson-MWCNT) and diethyl malonate (dem-MWCNT). SEM and TEM micrographs confirmed improved dispersibility of the MWCNTs modified with aromatic structure of dapsone inside PMMA matrix. A significant increase in a glass transition temperature of over 60 degrees C has been found for the 1 wt% dapson-MWCNT nanocomposite. Additional modification of dapson-MWCNT by further increasing aromaticity and voluminosity of attached moiety (fid-MWCNT), showed 30 degrees C increases in a glass transition temperature at 4 wt% of nanofiller loading, which is similar to shift of 37 degrees C with loading of MWCNTs modified with ester terminal group. A maximum increase of 56% of reduced modulus and 86% of hardness was obtained for 1 wt% loading of dapson-MWCNT nanofiller. (C) 2016 Society of Plastics Engineers",
journal = "Polymer Composites",
title = "Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization",
volume = "38",
number = "SI",
pages = "E472-E489",
doi = "10.1002/pc.23996"
}
Brkovic, D. V., Pavlović, V. B., Pavlović, V. P., Obradovic, N., Mitrić, M., Stevanovic, S., Vlahović, B., Uskokovic, P. S.,& Marinković, A. D. (2017). Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization.
Polymer Composites, 38(SI), E472-E489.
https://doi.org/10.1002/pc.23996
Brkovic DV, Pavlović VB, Pavlović VP, Obradovic N, Mitrić M, Stevanovic S, Vlahović B, Uskokovic PS, Marinković AD. Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization. Polymer Composites. 2017;38(SI):E472-E489
Brkovic Danijela V., Pavlović Vladimir B., Pavlović Vera P., Obradovic Nina, Mitrić Miodrag, Stevanovic Sanja, Vlahović Branislav, Uskokovic Petar S., Marinković Aleksandar D., "Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization" Polymer Composites, 38, no. SI (2017):E472-E489,
https://doi.org/10.1002/pc.23996 .
7
5
6

Structural investigation of mechanically activated ZnO powder

Peleš, Adriana; Pavlović, Vera P.; Filipovic, S.; Obradovic, N.; Mancic, L.; Krstić, Jelena; Mitrić, Miodrag; Vlahović, Branislav; Rašić, Goran; Kosanovic, D.; Pavlović, Vladimir B.

(2015)

TY  - JOUR
AU  - Peleš, Adriana
AU  - Pavlović, Vera P.
AU  - Filipovic, S.
AU  - Obradovic, N.
AU  - Mancic, L.
AU  - Krstić, Jelena
AU  - Mitrić, Miodrag
AU  - Vlahović, Branislav
AU  - Rašić, Goran
AU  - Kosanovic, D.
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/735
AB  - Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietvelds method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation. (C) 2015 Published by Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Structural investigation of mechanically activated ZnO powder
VL  - 648
SP  - 971
EP  - 979
DO  - 10.1016/j.jallcom.2015.06.247
ER  - 
@article{
author = "Peleš, Adriana and Pavlović, Vera P. and Filipovic, S. and Obradovic, N. and Mancic, L. and Krstić, Jelena and Mitrić, Miodrag and Vlahović, Branislav and Rašić, Goran and Kosanovic, D. and Pavlović, Vladimir B.",
year = "2015",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/735",
abstract = "Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietvelds method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation. (C) 2015 Published by Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Structural investigation of mechanically activated ZnO powder",
volume = "648",
pages = "971-979",
doi = "10.1016/j.jallcom.2015.06.247"
}
Peleš, A., Pavlović, V. P., Filipovic, S., Obradovic, N., Mancic, L., Krstić, J., Mitrić, M., Vlahović, B., Rašić, G., Kosanovic, D.,& Pavlović, V. B. (2015). Structural investigation of mechanically activated ZnO powder.
Journal of Alloys and Compounds, 648, 971-979.
https://doi.org/10.1016/j.jallcom.2015.06.247
Peleš A, Pavlović VP, Filipovic S, Obradovic N, Mancic L, Krstić J, Mitrić M, Vlahović B, Rašić G, Kosanovic D, Pavlović VB. Structural investigation of mechanically activated ZnO powder. Journal of Alloys and Compounds. 2015;648:971-979
Peleš Adriana, Pavlović Vera P., Filipovic S., Obradovic N., Mancic L., Krstić Jelena, Mitrić Miodrag, Vlahović Branislav, Rašić Goran, Kosanovic D., Pavlović Vladimir B., "Structural investigation of mechanically activated ZnO powder" Journal of Alloys and Compounds, 648 (2015):971-979,
https://doi.org/10.1016/j.jallcom.2015.06.247 .
8
9
9

Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization

Vujančević, Jelena; Đokić, Veljko R.; Bjelajac, Anđelika; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe T.; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko R.
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/841
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1121
UR  - http://www.itn.sanu.ac.rs/opus4/files/1121/Vujancevic-14YRC.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7545
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
SP  - 18
EP  - 18
ER  - 
@conference{
author = "Vujančević, Jelena and Đokić, Veljko R. and Bjelajac, Anđelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe T. and Pavlović, Vladimir B.",
year = "2015",
url = "http://dais.sanu.ac.rs/123456789/841, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1121, http://www.itn.sanu.ac.rs/opus4/files/1121/Vujancevic-14YRC.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7545",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18"
}
Vujančević, J., Đokić, V. R., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ. T.,& Pavlović, V. B. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization.
Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 18-18.
Vujančević J, Đokić VR, Bjelajac A, Pavlović VP, Mitrić M, Janaćković ĐT, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia. 2015;:18-18
Vujančević Jelena, Đokić Veljko R., Bjelajac Anđelika, Pavlović Vera P., Mitrić Miodrag, Janaćković Đorđe T., Pavlović Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia (2015):18-18

Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures

Vujančević, Jelena; Bjelajac, Anđelika; Obradović, Nina; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe T.; Rašić, Goran; Vlahović, Branislav; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe T.
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/764
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1038
UR  - http://www.itn.sanu.ac.rs/opus4/files/1038/Vujancevic-ACAIV.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7527
AB  - The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
T1  - Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
SP  - 81
EP  - 81
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Obradović, Nina and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe T. and Rašić, Goran and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2015",
url = "http://dais.sanu.ac.rs/123456789/764, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/1038, http://www.itn.sanu.ac.rs/opus4/files/1038/Vujancevic-ACAIV.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7527",
abstract = "The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015",
title = "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures",
pages = "81-81"
}
Vujančević, J., Bjelajac, A., Obradović, N., Pavlović, V. P., Mitrić, M., Janaćković, Đ. T., Rašić, G., Vlahović, B.,& Pavlović, V. B. (2015). Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures.
Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
Belgrade : Serbian Ceramic Society., 81-81.
Vujančević J, Bjelajac A, Obradović N, Pavlović VP, Mitrić M, Janaćković ĐT, Rašić G, Vlahović B, Pavlović VB. Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015. 2015;:81-81
Vujančević Jelena, Bjelajac Anđelika, Obradović Nina, Pavlović Vera P., Mitrić Miodrag, Janaćković Đorđe T., Rašić Goran, Vlahović Branislav, Pavlović Vladimir B., "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures" Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015 (2015):81-81

Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis

Dordevic, N.; Obradovic, N.; Kosanovic, D.; Mitrić, Miodrag; Pavlović, Vera P.

(2014)

TY  - JOUR
AU  - Dordevic, N.
AU  - Obradovic, N.
AU  - Kosanovic, D.
AU  - Mitrić, Miodrag
AU  - Pavlović, Vera P.
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/374
AB  - Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400 degrees C). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier sintering process at lower temperature. The influence of MoO3 on the preparation process of cordierite ceramics was investigated. 2MgO-2Al(2)O(3)-5SiO(2) was researched by sintering followed binary systems: MgO/MoO3, Al2O3/MoO3 and SiO2/MoO3 (all sintered at 850 degrees C and 1100 degrees C, sintering time 2h). Composition of these systems was 80 mass% of oxide and 20 mass% MoO3. The effects of sintering, the composition and morphology were followed by X-ray diffraction and SEM microscopy. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3, which is the significance information for further research. MAS ceramics were sintered with 20 mass% MoO3 at 1100 degrees C, 1200 degrees C and 1300 degrees C, during 2h.
T2  - Science of Sintering
T1  - Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis
VL  - 46
IS  - 3
SP  - 307
EP  - 313
DO  - 10.2298/SOS1403307D
ER  - 
@article{
author = "Dordevic, N. and Obradovic, N. and Kosanovic, D. and Mitrić, Miodrag and Pavlović, Vera P.",
year = "2014",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/374",
abstract = "Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400 degrees C). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier sintering process at lower temperature. The influence of MoO3 on the preparation process of cordierite ceramics was investigated. 2MgO-2Al(2)O(3)-5SiO(2) was researched by sintering followed binary systems: MgO/MoO3, Al2O3/MoO3 and SiO2/MoO3 (all sintered at 850 degrees C and 1100 degrees C, sintering time 2h). Composition of these systems was 80 mass% of oxide and 20 mass% MoO3. The effects of sintering, the composition and morphology were followed by X-ray diffraction and SEM microscopy. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3, which is the significance information for further research. MAS ceramics were sintered with 20 mass% MoO3 at 1100 degrees C, 1200 degrees C and 1300 degrees C, during 2h.",
journal = "Science of Sintering",
title = "Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis",
volume = "46",
number = "3",
pages = "307-313",
doi = "10.2298/SOS1403307D"
}
Dordevic, N., Obradovic, N., Kosanovic, D., Mitrić, M.,& Pavlović, V. P. (2014). Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis.
Science of Sintering, 46(3), 307-313.
https://doi.org/10.2298/SOS1403307D
Dordevic N, Obradovic N, Kosanovic D, Mitrić M, Pavlović VP. Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis. Science of Sintering. 2014;46(3):307-313
Dordevic N., Obradovic N., Kosanovic D., Mitrić Miodrag, Pavlović Vera P., "Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis" Science of Sintering, 46, no. 3 (2014):307-313,
https://doi.org/10.2298/SOS1403307D .
3
3
3

Raman Responses in Mechanically Activated BaTiO3

Pavlović, Vera P.; Nikolic, Maria V.; Pavlović, Vladimir B.; Blanuša, Jovan; Stevanovic, Suzana; Mitic, Vojislav V.; Scepanovic, Maja; Vlahović, Branislav

(2014)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Nikolic, Maria V.
AU  - Pavlović, Vladimir B.
AU  - Blanuša, Jovan
AU  - Stevanovic, Suzana
AU  - Mitic, Vojislav V.
AU  - Scepanovic, Maja
AU  - Vlahović, Branislav
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5863
AB  - The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.
T2  - Journal of the American Ceramic Society
T1  - Raman Responses in Mechanically Activated BaTiO3
VL  - 97
IS  - 2
SP  - 601
EP  - 608
DO  - 10.1111/jace.12423
ER  - 
@article{
author = "Pavlović, Vera P. and Nikolic, Maria V. and Pavlović, Vladimir B. and Blanuša, Jovan and Stevanovic, Suzana and Mitic, Vojislav V. and Scepanovic, Maja and Vlahović, Branislav",
year = "2014",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5863",
abstract = "The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.",
journal = "Journal of the American Ceramic Society",
title = "Raman Responses in Mechanically Activated BaTiO3",
volume = "97",
number = "2",
pages = "601-608",
doi = "10.1111/jace.12423"
}
Pavlović, V. P., Nikolic, M. V., Pavlović, V. B., Blanuša, J., Stevanovic, S., Mitic, V. V., Scepanovic, M.,& Vlahović, B. (2014). Raman Responses in Mechanically Activated BaTiO3.
Journal of the American Ceramic Society, 97(2), 601-608.
https://doi.org/10.1111/jace.12423
Pavlović VP, Nikolic MV, Pavlović VB, Blanuša J, Stevanovic S, Mitic VV, Scepanovic M, Vlahović B. Raman Responses in Mechanically Activated BaTiO3. Journal of the American Ceramic Society. 2014;97(2):601-608
Pavlović Vera P., Nikolic Maria V., Pavlović Vladimir B., Blanuša Jovan, Stevanovic Suzana, Mitic Vojislav V., Scepanovic Maja, Vlahović Branislav, "Raman Responses in Mechanically Activated BaTiO3" Journal of the American Ceramic Society, 97, no. 2 (2014):601-608,
https://doi.org/10.1111/jace.12423 .
11
10
12

Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of beta-crystal polymorph rich matrix through mechanical activation of the filler

Mofokeng, Tladi G.; Luyt, Adriaan S.; Pavlović, Vera P.; Pavlović, Vladimir B.; Dudić, Duško; Vlahović, Branislav; Đoković, Vladimir

(2014)

TY  - JOUR
AU  - Mofokeng, Tladi G.
AU  - Luyt, Adriaan S.
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Dudić, Duško
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2014
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/5919
AB  - Nanocomposites of polyvinylidene fluoride/polymethyl methacrylate (PVDF/PMMA) blend and mechanically activated barium titanate (BaTiO3) particles were prepared by melt mixing. Modification of filler by means of mechanical activation has a profound effect on the crystallization of PVDF in the blend matrix. Raman analysis showed that the modified BaTiO3 particles, due to higher specific surfaces, induce, predominantly, the crystallization of the electrically active beta-phase of PVDF, while the initial micron size particles induce the formation of the most common but non-polar alpha-crystal form. The introduction of activated particles reduces the overall crystallinity but slightly affects the crystallization and melting temperatures of the matrix. Dielectric spectroscopy revealed that at fixed filler content the dielectric constant of the blend increases with decreasing of the particle size (increasing of the activation time). A similar trend was observed for the storage moduli in dynamic mechanical analysis; the stiffness of the composite was higher when mechanically activated particles were used. (C) 2014 AIP Publishing LLC.
T2  - Journal of Applied Physics
T1  - Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of beta-crystal polymorph rich matrix through mechanical activation of the filler
VL  - 115
IS  - 8
DO  - 10.1063/1.4866694
ER  - 
@article{
author = "Mofokeng, Tladi G. and Luyt, Adriaan S. and Pavlović, Vera P. and Pavlović, Vladimir B. and Dudić, Duško and Vlahović, Branislav and Đoković, Vladimir",
year = "2014",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/5919",
abstract = "Nanocomposites of polyvinylidene fluoride/polymethyl methacrylate (PVDF/PMMA) blend and mechanically activated barium titanate (BaTiO3) particles were prepared by melt mixing. Modification of filler by means of mechanical activation has a profound effect on the crystallization of PVDF in the blend matrix. Raman analysis showed that the modified BaTiO3 particles, due to higher specific surfaces, induce, predominantly, the crystallization of the electrically active beta-phase of PVDF, while the initial micron size particles induce the formation of the most common but non-polar alpha-crystal form. The introduction of activated particles reduces the overall crystallinity but slightly affects the crystallization and melting temperatures of the matrix. Dielectric spectroscopy revealed that at fixed filler content the dielectric constant of the blend increases with decreasing of the particle size (increasing of the activation time). A similar trend was observed for the storage moduli in dynamic mechanical analysis; the stiffness of the composite was higher when mechanically activated particles were used. (C) 2014 AIP Publishing LLC.",
journal = "Journal of Applied Physics",
title = "Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of beta-crystal polymorph rich matrix through mechanical activation of the filler",
volume = "115",
number = "8",
doi = "10.1063/1.4866694"
}
Mofokeng, T. G., Luyt, A. S., Pavlović, V. P., Pavlović, V. B., Dudić, D., Vlahović, B.,& Đoković, V. (2014). Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of beta-crystal polymorph rich matrix through mechanical activation of the filler.
Journal of Applied Physics, 115(8).
https://doi.org/10.1063/1.4866694
Mofokeng TG, Luyt AS, Pavlović VP, Pavlović VB, Dudić D, Vlahović B, Đoković V. Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of beta-crystal polymorph rich matrix through mechanical activation of the filler. Journal of Applied Physics. 2014;115(8)
Mofokeng Tladi G., Luyt Adriaan S., Pavlović Vera P., Pavlović Vladimir B., Dudić Duško, Vlahović Branislav, Đoković Vladimir, "Ferroelectric nanocomposites of polyvinylidene fluoride/polymethyl methacrylate blend and BaTiO3 particles: Fabrication of beta-crystal polymorph rich matrix through mechanical activation of the filler" Journal of Applied Physics, 115, no. 8 (2014),
https://doi.org/10.1063/1.4866694 .
34
27
31

The influence of mechanical activation on the structure of ZnO

Peleš, Adriana; Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Obradović, Nina; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2013)

TY  - CONF
AU  - Peleš, Adriana
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/433
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/695
UR  - http://www.itn.sanu.ac.rs/opus4/files/695/Peles-12YRC-11.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7435
AB  - In this paper, the authors investigated the influence of mechanicall activation of ZnO powder on crystal and micro structure. Because of its structure, ZnO could be used like filler in polymer ceramics nanocompozites. Performances of these material depend on filler morphology, surfaces, texture and size particle. According to this, ZnO powder was activated in a planetary ball mill for 2, 5, 10 and 30 minutes. Changes in crystal and micro structure were observed by SEM, XRD, Raman spectroscopy and UV-Vis Reflection. SEM micrographs show increase of agglomerates size with prolonged milling time. XRD patterns indicate that the peak intensities getting lower and expand with activation time. UV-Vis reflection shows that there is a clear difference in the spectra with increasing activation time. The results we got by the investigation of dinamical structure by Raman spectroscopy are in corelation with the other results of structures analysis. Results presented here enable further optimisation of the polymer nanocompozite based on ZnO and PVDF making process.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Twelfth Young Researchers' Conference Materials Sciences and Engineering December 11-13, 2013, Belgrade, Serbia
T1  - The influence of mechanical activation on the structure of ZnO
SP  - 11
EP  - 11
ER  - 
@conference{
author = "Peleš, Adriana and Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Obradović, Nina and Pavlović, Vladimir B.",
year = "2013",
url = "http://dais.sanu.ac.rs/123456789/433, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/695, http://www.itn.sanu.ac.rs/opus4/files/695/Peles-12YRC-11.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7435",
abstract = "In this paper, the authors investigated the influence of mechanicall activation of ZnO powder on crystal and micro structure. Because of its structure, ZnO could be used like filler in polymer ceramics nanocompozites. Performances of these material depend on filler morphology, surfaces, texture and size particle. According to this, ZnO powder was activated in a planetary ball mill for 2, 5, 10 and 30 minutes. Changes in crystal and micro structure were observed by SEM, XRD, Raman spectroscopy and UV-Vis Reflection. SEM micrographs show increase of agglomerates size with prolonged milling time. XRD patterns indicate that the peak intensities getting lower and expand with activation time. UV-Vis reflection shows that there is a clear difference in the spectra with increasing activation time. The results we got by the investigation of dinamical structure by Raman spectroscopy are in corelation with the other results of structures analysis. Results presented here enable further optimisation of the polymer nanocompozite based on ZnO and PVDF making process.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Twelfth Young Researchers' Conference Materials Sciences and Engineering December 11-13, 2013, Belgrade, Serbia",
title = "The influence of mechanical activation on the structure of ZnO",
pages = "11-11"
}
Peleš, A., Filipović, S., Pavlović, V. P., Mitrić, M., Obradović, N.,& Pavlović, V. B. (2013). The influence of mechanical activation on the structure of ZnO.
Program and the Book of Abstracts / Twelfth Young Researchers' Conference Materials Sciences and Engineering December 11-13, 2013, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 11-11.
Peleš A, Filipović S, Pavlović VP, Mitrić M, Obradović N, Pavlović VB. The influence of mechanical activation on the structure of ZnO. Program and the Book of Abstracts / Twelfth Young Researchers' Conference Materials Sciences and Engineering December 11-13, 2013, Belgrade, Serbia. 2013;:11-11
Peleš Adriana, Filipović Suzana, Pavlović Vera P., Mitrić Miodrag, Obradović Nina, Pavlović Vladimir B., "The influence of mechanical activation on the structure of ZnO" Program and the Book of Abstracts / Twelfth Young Researchers' Conference Materials Sciences and Engineering December 11-13, 2013, Belgrade, Serbia (2013):11-11

Characterization of mechanically activated ZnO powder

Peleš, Adriana; Pavlović, Vera P.; Obradović, Nina; Živojinović, Jelena; Mitrić, Miodrag; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2013)

TY  - CONF
AU  - Peleš, Adriana
AU  - Pavlović, Vera P.
AU  - Obradović, Nina
AU  - Živojinović, Jelena
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/426
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/688
UR  - http://www.itn.sanu.ac.rs/opus4/files/688/Peles-ACAII-47.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7433
AB  - Materials based on ZnO structure have more frequently application as fillers in polymer ceramics nanocompozites. Performances of these materials depends on fillers morphology, surfaces texture and particles size. According to this, in this paper, the authors investigated the influence of mechanical activation of ZnO powder on crystal and micro structure. Commercially available ZnO powder was activated in a planetary ball mill for 2, 5, 10 and 30 minutes. Characterization of such obtained powders was performed using XRD, SEM and Raman spectroscopy. XRD patterns indicated at lowering of peak intensities along with its broadening wich is realted to partical fragmentation and amorphyzation. Micrographs show irregularly shaped particles at the beginning and with prolonged milling time, particles gained uniformed distibution, while after 30 minutes of activation agglomerates started forming. The results we got by investigation of dynamical structure by Raman spectroscopy are in correlation with the other results of structures analysis. Results presented here enable further optimization of, polymer nanocompozite based on ZnO and PVDF, making process.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
T1  - Characterization of mechanically activated ZnO powder
SP  - 47
EP  - 47
ER  - 
@conference{
author = "Peleš, Adriana and Pavlović, Vera P. and Obradović, Nina and Živojinović, Jelena and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2013",
url = "http://dais.sanu.ac.rs/123456789/426, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/688, http://www.itn.sanu.ac.rs/opus4/files/688/Peles-ACAII-47.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7433",
abstract = "Materials based on ZnO structure have more frequently application as fillers in polymer ceramics nanocompozites. Performances of these materials depends on fillers morphology, surfaces texture and particles size. According to this, in this paper, the authors investigated the influence of mechanical activation of ZnO powder on crystal and micro structure. Commercially available ZnO powder was activated in a planetary ball mill for 2, 5, 10 and 30 minutes. Characterization of such obtained powders was performed using XRD, SEM and Raman spectroscopy. XRD patterns indicated at lowering of peak intensities along with its broadening wich is realted to partical fragmentation and amorphyzation. Micrographs show irregularly shaped particles at the beginning and with prolonged milling time, particles gained uniformed distibution, while after 30 minutes of activation agglomerates started forming. The results we got by investigation of dynamical structure by Raman spectroscopy are in correlation with the other results of structures analysis. Results presented here enable further optimization of, polymer nanocompozite based on ZnO and PVDF, making process.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade",
title = "Characterization of mechanically activated ZnO powder",
pages = "47-47"
}
Peleš, A., Pavlović, V. P., Obradović, N., Živojinović, J., Mitrić, M.,& Pavlović, V. B. (2013). Characterization of mechanically activated ZnO powder.
Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
Belgrade : Serbian Ceramic Society., 47-47.
Peleš A, Pavlović VP, Obradović N, Živojinović J, Mitrić M, Pavlović VB. Characterization of mechanically activated ZnO powder. Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade. 2013;:47-47
Peleš Adriana, Pavlović Vera P., Obradović Nina, Živojinović Jelena, Mitrić Miodrag, Pavlović Vladimir B., "Characterization of mechanically activated ZnO powder" Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade (2013):47-47

Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles

Pavlović, Vera P.; Pavlović, Vladimir B.; Vlahović, Branislav; Božanić, Dušan K.; Pajović, Jelena D.; Dojčilović, Radovan; Đoković, Vladimir

(2013)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Božanić, Dušan K.
AU  - Pajović, Jelena D.
AU  - Dojčilović, Radovan
AU  - Đoković, Vladimir
PY  - 2013
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7015
AB  - Nanocomposites of electroactive ceramics and ferroelectric polymers exploit favorable features of the matrix polymer and the nanostructured filler to produce new functional materials for pressure and IR sensors. In this study, the influence of mechanical activation of barium titanate (BaTiO3) particles on the structural properties of BaTiO3/polyvinylidene fluoride (PVDF) nanocomposites was investigated. Nanocomposite films were prepared by the solution casting method and characterized by scanning electron microscopy, x-ray diffraction and Raman spectroscopy. It was found that mechanically activated fillers promote the formation of a ferroelectric beta-phase during crystallization of PVDF.
T2  - Physica Scripta
T1  - Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles
VL  - T157
DO  - 10.1088/0031-8949/2013/T157/014006
ER  - 
@article{
author = "Pavlović, Vera P. and Pavlović, Vladimir B. and Vlahović, Branislav and Božanić, Dušan K. and Pajović, Jelena D. and Dojčilović, Radovan and Đoković, Vladimir",
year = "2013",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/7015",
abstract = "Nanocomposites of electroactive ceramics and ferroelectric polymers exploit favorable features of the matrix polymer and the nanostructured filler to produce new functional materials for pressure and IR sensors. In this study, the influence of mechanical activation of barium titanate (BaTiO3) particles on the structural properties of BaTiO3/polyvinylidene fluoride (PVDF) nanocomposites was investigated. Nanocomposite films were prepared by the solution casting method and characterized by scanning electron microscopy, x-ray diffraction and Raman spectroscopy. It was found that mechanically activated fillers promote the formation of a ferroelectric beta-phase during crystallization of PVDF.",
journal = "Physica Scripta",
title = "Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles",
volume = "T157",
doi = "10.1088/0031-8949/2013/T157/014006"
}
Pavlović, V. P., Pavlović, V. B., Vlahović, B., Božanić, D. K., Pajović, J. D., Dojčilović, R.,& Đoković, V. (2013). Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles.
Physica Scripta, T157.
https://doi.org/10.1088/0031-8949/2013/T157/014006
Pavlović VP, Pavlović VB, Vlahović B, Božanić DK, Pajović JD, Dojčilović R, Đoković V. Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles. Physica Scripta. 2013;T157
Pavlović Vera P., Pavlović Vladimir B., Vlahović Branislav, Božanić Dušan K., Pajović Jelena D., Dojčilović Radovan, Đoković Vladimir, "Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles" Physica Scripta, T157 (2013),
https://doi.org/10.1088/0031-8949/2013/T157/014006 .
1
17
16
18

Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3

Pavlović, Vera P.; Pavlović, Vladimir B.; Blanuša, Jovan; Branković, Goran O.; Spreitzer, Matjaž; Krstić, Jelena I.

(Belgrade : Serbian Ceramic Society, 2012)

TY  - CONF
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Blanuša, Jovan
AU  - Branković, Goran O.
AU  - Spreitzer, Matjaž
AU  - Krstić, Jelena I.
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/527
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/794
UR  - http://www.itn.sanu.ac.rs/opus4/files/794/Pavlovic_ACAI.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7470
AB  - In order to obtain nanocrystalline material which can be used in MLCC production, the investigations of the influence of BaTiO3 powder tribophysical activation (TPA) on its structural changes, dielectric and ferroelectric properties have been performed. Microstructure development and crystal structure have been studied by mercury porosimetry method, SEM, EDS and X-ray powder diffraction analyses. The modifications of dielectric and ferroelectric properties of sintered samples have been examined and correlated with observed structural changes induced by TPA of starting powders. It has been found that dielectric and ferroelectric properties of tribophysically activated BaTiO3 could be tuned by controlling the grain size and lattice strain of activated nanostructured material.
PB  - Belgrade : Serbian Ceramic Society
C3  - The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts
T1  - Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3
SP  - 25
EP  - 25
ER  - 
@conference{
author = "Pavlović, Vera P. and Pavlović, Vladimir B. and Blanuša, Jovan and Branković, Goran O. and Spreitzer, Matjaž and Krstić, Jelena I.",
year = "2012",
url = "http://dais.sanu.ac.rs/123456789/527, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/794, http://www.itn.sanu.ac.rs/opus4/files/794/Pavlovic_ACAI.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7470",
abstract = "In order to obtain nanocrystalline material which can be used in MLCC production, the investigations of the influence of BaTiO3 powder tribophysical activation (TPA) on its structural changes, dielectric and ferroelectric properties have been performed. Microstructure development and crystal structure have been studied by mercury porosimetry method, SEM, EDS and X-ray powder diffraction analyses. The modifications of dielectric and ferroelectric properties of sintered samples have been examined and correlated with observed structural changes induced by TPA of starting powders. It has been found that dielectric and ferroelectric properties of tribophysically activated BaTiO3 could be tuned by controlling the grain size and lattice strain of activated nanostructured material.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts",
title = "Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3",
pages = "25-25"
}
Pavlović, V. P., Pavlović, V. B., Blanuša, J., Branković, G. O., Spreitzer, M.,& Krstić, J. I. (2012). Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3.
The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts
Belgrade : Serbian Ceramic Society., 25-25.
Pavlović VP, Pavlović VB, Blanuša J, Branković GO, Spreitzer M, Krstić JI. Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3. The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts. 2012;:25-25
Pavlović Vera P., Pavlović Vladimir B., Blanuša Jovan, Branković Goran O., Spreitzer Matjaž, Krstić Jelena I., "Structural Changes, Dielectric and Ferroelectric Properties of Tribophysically Activated BaTiO3" The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts (2012):25-25

Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties

Paunović, Vesna; Mitić, Vojislav V.; Miljković, Miroslav; Pavlović, Vera P.; Živković, Ljiljana

(Belgrade : International Institute for the Science of Sintering, 2012)

TY  - JOUR
AU  - Paunović, Vesna
AU  - Mitić, Vojislav V.
AU  - Miljković, Miroslav
AU  - Pavlović, Vera P.
AU  - Živković, Ljiljana
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/194
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/453
UR  - http://www.itn.sanu.ac.rs/opus4/files/453/0350-820X1202223P.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7364
AB  - Doped BaTiO 3-ceramics is very interesting for their application as PTCR resistors, multilayer ceramic capacitors, thermal sensors etc. Ho doped BaTiO 3 ceramics, with different Ho 2O 3 content, ranging from 0.01 to 1.0 wt% Ho, were investigated regarding their microstructural and dielectric characteristics. The samples were prepared by the conventional solid state reaction and sintered at 1320° and 1380°C in an air atmosphere for 4 hours. The grain size and microstructure characteristics for various samples and their phase composition was carried out using a scanning electron microscope (SEM) equipped with EDS system. SEM analysis of Ho/BaTiO 3 doped ceramics showed that in samples doped with a rare-earth ions low level, the grain size ranged from 20-30μμm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μμm. Dielectric measurements were carried out as a function of temperature up to180 °C. The low doped samples sintered at 1380 °C, display the high value of dielectric permittivity at room temperature, 2400 for 0.01 Ho/BaTiO 3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a Curie-Weiss low and modified CurieWeiss low the Curie constant (C), Curie temperature (Tc) and a critical exponent of nonlinearity (γ) were calculated. The obtained value of γ pointed out that the specimens have almost sharp phase transition.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties
SP  - 223
EP  - 233
DO  - 10.2298/SOS1202223P
ER  - 
@article{
author = "Paunović, Vesna and Mitić, Vojislav V. and Miljković, Miroslav and Pavlović, Vera P. and Živković, Ljiljana",
year = "2012",
url = "http://dais.sanu.ac.rs/123456789/194, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/453, http://www.itn.sanu.ac.rs/opus4/files/453/0350-820X1202223P.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7364",
abstract = "Doped BaTiO 3-ceramics is very interesting for their application as PTCR resistors, multilayer ceramic capacitors, thermal sensors etc. Ho doped BaTiO 3 ceramics, with different Ho 2O 3 content, ranging from 0.01 to 1.0 wt% Ho, were investigated regarding their microstructural and dielectric characteristics. The samples were prepared by the conventional solid state reaction and sintered at 1320° and 1380°C in an air atmosphere for 4 hours. The grain size and microstructure characteristics for various samples and their phase composition was carried out using a scanning electron microscope (SEM) equipped with EDS system. SEM analysis of Ho/BaTiO 3 doped ceramics showed that in samples doped with a rare-earth ions low level, the grain size ranged from 20-30μμm, while with the higher dopant concentration the abnormal grain growth is inhibited and the grain size ranged between 2-10μμm. Dielectric measurements were carried out as a function of temperature up to180 °C. The low doped samples sintered at 1380 °C, display the high value of dielectric permittivity at room temperature, 2400 for 0.01 Ho/BaTiO 3. A nearly flat permittivity-response was obtained in specimens with higher additive content. Using a Curie-Weiss low and modified CurieWeiss low the Curie constant (C), Curie temperature (Tc) and a critical exponent of nonlinearity (γ) were calculated. The obtained value of γ pointed out that the specimens have almost sharp phase transition.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties",
pages = "223-233",
doi = "10.2298/SOS1202223P"
}
Paunović, V., Mitić, V. V., Miljković, M., Pavlović, V. P.,& Živković, L. (2012). Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties.
Science of Sintering
Belgrade : International Institute for the Science of Sintering., 223-233.
https://doi.org/10.2298/SOS1202223P
Paunović V, Mitić VV, Miljković M, Pavlović VP, Živković L. Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties. Science of Sintering. 2012;:223-233
Paunović Vesna, Mitić Vojislav V., Miljković Miroslav, Pavlović Vera P., Živković Ljiljana, "Ho2O3 Additive Effects on BaTiO3 Ceramics Microstructure and Dielectric Properties" Science of Sintering (2012):223-233,
https://doi.org/10.2298/SOS1202223P .
8
6
7

Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics

Mitić, Vojislav V.; Paunović, Vesna; Pavlović, Vera P.; Živković, Lj.

(Belgrade : International Institute for the Science of Sintering, 2011)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Paunović, Vesna
AU  - Pavlović, Vera P.
AU  - Živković, Lj.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/198
UR  - http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/457
UR  - http://www.itn.sanu.ac.rs/opus4/files/457/0350-820X1103277M.pdf
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/7365
AB  - Sintering process is a complex of different synergetic effects during the ceramics materials consolidation. The microstructural level properties control is very important as a stage in advanced materials prognosis. SEM analysis of Yb/BaTiO3 doped ceramics showed that in samples doped with a low level of dopant and sintered at higher temperatures the grain size ranged from 10-60μm, while with the higher dopant concentration the grain size ranged between 2-15μm. The morphology of sintered BaTiO3-ceramics grains points out the validity of developing new structure analytical methods based on different geometries of grains' model systems. The idea of electrical properties of BaTiO3-ceramics being influenced by intergrain microcontacts can be successfully followed if we start with the two-sphere Coble’s model and also the correction of the Coble’s model. In this paper, the grains contact models based on spherical, ellipsoidal and polyhedral geometries are presented making a new modeling tool for structure research of BaTiO3-ceramics materials. Intergranular impedance analysis of grains clusters was also introduced. Obtained results enabled establishment of interrelation between structural and electrical parameters.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics
SP  - 277
EP  - 287
DO  - 10.2298/SOS1103277M
ER  - 
@article{
author = "Mitić, Vojislav V. and Paunović, Vesna and Pavlović, Vera P. and Živković, Lj.",
year = "2011",
url = "http://dais.sanu.ac.rs/123456789/198, http://www.itn.sanu.ac.rs/opus4/frontdoor/index/index/docId/457, http://www.itn.sanu.ac.rs/opus4/files/457/0350-820X1103277M.pdf, http://vinar.vin.bg.ac.rs/handle/123456789/7365",
abstract = "Sintering process is a complex of different synergetic effects during the ceramics materials consolidation. The microstructural level properties control is very important as a stage in advanced materials prognosis. SEM analysis of Yb/BaTiO3 doped ceramics showed that in samples doped with a low level of dopant and sintered at higher temperatures the grain size ranged from 10-60μm, while with the higher dopant concentration the grain size ranged between 2-15μm. The morphology of sintered BaTiO3-ceramics grains points out the validity of developing new structure analytical methods based on different geometries of grains' model systems. The idea of electrical properties of BaTiO3-ceramics being influenced by intergrain microcontacts can be successfully followed if we start with the two-sphere Coble’s model and also the correction of the Coble’s model. In this paper, the grains contact models based on spherical, ellipsoidal and polyhedral geometries are presented making a new modeling tool for structure research of BaTiO3-ceramics materials. Intergranular impedance analysis of grains clusters was also introduced. Obtained results enabled establishment of interrelation between structural and electrical parameters.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics",
pages = "277-287",
doi = "10.2298/SOS1103277M"
}
Mitić, V. V., Paunović, V., Pavlović, V. P.,& Živković, Lj. (2011). Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics.
Science of Sintering
Belgrade : International Institute for the Science of Sintering., 277-287.
https://doi.org/10.2298/SOS1103277M
Mitić VV, Paunović V, Pavlović VP, Živković L. Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics. Science of Sintering. 2011;:277-287
Mitić Vojislav V., Paunović Vesna, Pavlović Vera P., Živković Lj., "Sintering process influence on microstructure and intergranular impedance of rare-earth modified BaTiO3-ceramics" Science of Sintering (2011):277-287,
https://doi.org/10.2298/SOS1103277M .
5
7
7

Structural investigation of mechanically activated nanocrystalline BaTiO3 powders

Pavlović, Vera P.; Krstić, Jelena; Scepanovic, M. J.; Dojčilović, Jablan R.; Minic, D. M.; Blanuša, Jovan; Stevanovic, S.; Mitic, V.; Pavlović, Vladimir B.

(2011)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Krstić, Jelena
AU  - Scepanovic, M. J.
AU  - Dojčilović, Jablan R.
AU  - Minic, D. M.
AU  - Blanuša, Jovan
AU  - Stevanovic, S.
AU  - Mitic, V.
AU  - Pavlović, Vladimir B.
PY  - 2011
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/4449
AB  - In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1). (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Structural investigation of mechanically activated nanocrystalline BaTiO3 powders
VL  - 37
IS  - 7
SP  - 2513
EP  - 2518
DO  - 10.1016/j.ceramint.2011.03.064
ER  - 
@article{
author = "Pavlović, Vera P. and Krstić, Jelena and Scepanovic, M. J. and Dojčilović, Jablan R. and Minic, D. M. and Blanuša, Jovan and Stevanovic, S. and Mitic, V. and Pavlović, Vladimir B.",
year = "2011",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/4449",
abstract = "In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1). (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders",
volume = "37",
number = "7",
pages = "2513-2518",
doi = "10.1016/j.ceramint.2011.03.064"
}
Pavlović, V. P., Krstić, J., Scepanovic, M. J., Dojčilović, J. R., Minic, D. M., Blanuša, J., Stevanovic, S., Mitic, V.,& Pavlović, V. B. (2011). Structural investigation of mechanically activated nanocrystalline BaTiO3 powders.
Ceramics International, 37(7), 2513-2518.
https://doi.org/10.1016/j.ceramint.2011.03.064
Pavlović VP, Krstić J, Scepanovic MJ, Dojčilović JR, Minic DM, Blanuša J, Stevanovic S, Mitic V, Pavlović VB. Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. Ceramics International. 2011;37(7):2513-2518
Pavlović Vera P., Krstić Jelena, Scepanovic M. J., Dojčilović Jablan R., Minic D. M., Blanuša Jovan, Stevanovic S., Mitic V., Pavlović Vladimir B., "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders" Ceramics International, 37, no. 7 (2011):2513-2518,
https://doi.org/10.1016/j.ceramint.2011.03.064 .
12
15
15

Influence of mechanical activation on the structure of ultrafine BaTiO3 powders

Pavlović, Vera P.; Popovic, D.; Krstić, Jelena; Dojčilović, Jablan R.; Babić, Biljana M.; Pavlović, Vladimir B.

(2009)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Popovic, D.
AU  - Krstić, Jelena
AU  - Dojčilović, Jablan R.
AU  - Babić, Biljana M.
AU  - Pavlović, Vladimir B.
PY  - 2009
UR  - http://vinar.vin.bg.ac.rs/handle/123456789/3823
AB  - The influence of mechanical activation in a planetary ball mill on the change of the structure of BaTiO3 powders has been investigated. The particle size distribution of the nonactivated and activated samples was measured by a particle dimension laser analyzer. The mercury porosimetry method has been applied for determination of the surface area of the samples, bulk density, specific pore volumes, total porosity and the pore size distributions. Formation of paramagnetic centers and the change of the IR active modes was investigated by EPR and IR measurements. Semi-quantitative comparison of the BaCO3 and OH- group presence in IR spectra was calculated. The investigation showed that mechanical activation of BaTiO3 has a pronounced influence on the change of the powder particles structure and enables establishing the directions of possible BaTiO3 ceramics materials properties prognosis according to the synthesis-structure correlation. (C) 2009 Elsevier B.V. All rights reserved.
T2  - Journal of Alloys and Compounds
T1  - Influence of mechanical activation on the structure of ultrafine BaTiO3 powders
VL  - 486
IS  - 1-2
SP  - 633
EP  - 639
DO  - 10.1016/j.jallcom.2009.07.008
ER  - 
@article{
author = "Pavlović, Vera P. and Popovic, D. and Krstić, Jelena and Dojčilović, Jablan R. and Babić, Biljana M. and Pavlović, Vladimir B.",
year = "2009",
url = "http://vinar.vin.bg.ac.rs/handle/123456789/3823",
abstract = "The influence of mechanical activation in a planetary ball mill on the change of the structure of BaTiO3 powders has been investigated. The particle size distribution of the nonactivated and activated samples was measured by a particle dimension laser analyzer. The mercury porosimetry method has been applied for determination of the surface area of the samples, bulk density, specific pore volumes, total porosity and the pore size distributions. Formation of paramagnetic centers and the change of the IR active modes was investigated by EPR and IR measurements. Semi-quantitative comparison of the BaCO3 and OH- group presence in IR spectra was calculated. The investigation showed that mechanical activation of BaTiO3 has a pronounced influence on the change of the powder particles structure and enables establishing the directions of possible BaTiO3 ceramics materials properties prognosis according to the synthesis-structure correlation. (C) 2009 Elsevier B.V. All rights reserved.",
journal = "Journal of Alloys and Compounds",
title = "Influence of mechanical activation on the structure of ultrafine BaTiO3 powders",
volume = "486",
number = "1-2",
pages = "633-639",
doi = "10.1016/j.jallcom.2009.07.008"
}
Pavlović, V. P., Popovic, D., Krstić, J., Dojčilović, J. R., Babić, B. M.,& Pavlović, V. B. (2009). Influence of mechanical activation on the structure of ultrafine BaTiO3 powders.
Journal of Alloys and Compounds, 486(1-2), 633-639.
https://doi.org/10.1016/j.jallcom.2009.07.008
Pavlović VP, Popovic D, Krstić J, Dojčilović JR, Babić BM, Pavlović VB. Influence of mechanical activation on the structure of ultrafine BaTiO3 powders. Journal of Alloys and Compounds. 2009;486(1-2):633-639
Pavlović Vera P., Popovic D., Krstić Jelena, Dojčilović Jablan R., Babić Biljana M., Pavlović Vladimir B., "Influence of mechanical activation on the structure of ultrafine BaTiO3 powders" Journal of Alloys and Compounds, 486, no. 1-2 (2009):633-639,
https://doi.org/10.1016/j.jallcom.2009.07.008 .
18
17
17