Ivanović, Marija D.

Link to this page

Authority KeyName Variants
orcid::0000-0002-7218-6575
  • Ivanović, Marija D. (19)
  • Ivanović, Marija (9)
  • Petrović, Marija D. (1)
Projects
Photonics of micro and nano structured materials Capturing and quantitative analysis of multi-scale multi-channel diagnostic data.
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade)
SensSmart - Multi-SENSor SysteM and ARTificial intelligence in service of heart failure diagnosis Comision Nacional de Investigacion Cientifica y Technologica (CONICYT PAI Grant) [77180003]
Federal Ministry of Education and Research of Germany [01IS17070] Federal Ministry of Education and Research of Germany (grant No. 01IS17070)
German Research Foundation within the framework of the Heisenberg professorship programme [ES 434/8-1] Heisenberg professorship programme (grant No. ES 434/8-1)
Effects of assistive systems in neurorehabilitation: recovery of sensory-motor functions Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200103 (University of Belgrade, Faculty of Electrical Engineering)
Acute coronary syndrome: investigation of vulnerability (plaque, blood and myocardium), optimal treatment and determination of the factors for the prognosis Development of multivariable methods for analytical support to biomedical diagnostics
LOREAL-UNESCO through the Women in Science National Fellowship in Serbia Ministry of Education, Science and Technological Development of Republic of Serbia on the research program [grant No. 0402205 and grant No. 1702202]
Programa ICM Millennium Institute for Research in Optics (MIRO) U-Inicia VID Universidad de Chile [UI 004/2018]
Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, Serbia

Author's Bibliography

A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals

Atanasoski, Vladimir; Petrović, Jovana S.; Popović Maneski, Lana; Miletić, Marjan; Babić, Miloš; Nikolić, Aleksandra; Panescu, Dorin; Ivanović, Marija D.

(2024)

TY  - JOUR
AU  - Atanasoski, Vladimir
AU  - Petrović, Jovana S.
AU  - Popović Maneski, Lana
AU  - Miletić, Marjan
AU  - Babić, Miloš
AU  - Nikolić, Aleksandra
AU  - Panescu, Dorin
AU  - Ivanović, Marija D.
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13128
AB  - Clinical interpretation of an electrocardiogram (ECG) can be detrimentally affected by noise. Removal of the electromyographic (EMG) noise is particularly challenging due to its spectral overlap with the QRS complex. The existing EMG-denoising algorithms often distort signal morphology, thus obscuring diagnostically relevant information. Here, a new iterative regeneration method (IRM) for efficient EMG-noise suppression is proposed. The main hypothesis is that the temporary removal of the dominant ECG components enables extraction of the noise with the minimum alteration to the signal. The method is validated on SimEMG database of simultaneously recorded reference and noisy signals, MIT-BIH arrhythmia database and synthesized ECG signals, both with the noise from MIT Noise Stress Test Database. IRM denoising and morphology-preserving performance is superior to the wavelet- and FIR-based benchmark methods. : IRM is reliable, computationally non-intensive, fast and applicable to any number of ECG channels recorded by mobile or standard ECG devices.
T2  - IEEE Open Journal of Engineering in Medicine and Biology
T1  - A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals
SP  - 1
EP  - 10
DO  - 10.1109/OJEMB.2024.3380352
ER  - 
@article{
author = "Atanasoski, Vladimir and Petrović, Jovana S. and Popović Maneski, Lana and Miletić, Marjan and Babić, Miloš and Nikolić, Aleksandra and Panescu, Dorin and Ivanović, Marija D.",
year = "2024",
abstract = "Clinical interpretation of an electrocardiogram (ECG) can be detrimentally affected by noise. Removal of the electromyographic (EMG) noise is particularly challenging due to its spectral overlap with the QRS complex. The existing EMG-denoising algorithms often distort signal morphology, thus obscuring diagnostically relevant information. Here, a new iterative regeneration method (IRM) for efficient EMG-noise suppression is proposed. The main hypothesis is that the temporary removal of the dominant ECG components enables extraction of the noise with the minimum alteration to the signal. The method is validated on SimEMG database of simultaneously recorded reference and noisy signals, MIT-BIH arrhythmia database and synthesized ECG signals, both with the noise from MIT Noise Stress Test Database. IRM denoising and morphology-preserving performance is superior to the wavelet- and FIR-based benchmark methods. : IRM is reliable, computationally non-intensive, fast and applicable to any number of ECG channels recorded by mobile or standard ECG devices.",
journal = "IEEE Open Journal of Engineering in Medicine and Biology",
title = "A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals",
pages = "1-10",
doi = "10.1109/OJEMB.2024.3380352"
}
Atanasoski, V., Petrović, J. S., Popović Maneski, L., Miletić, M., Babić, M., Nikolić, A., Panescu, D.,& Ivanović, M. D.. (2024). A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals. in IEEE Open Journal of Engineering in Medicine and Biology, 1-10.
https://doi.org/10.1109/OJEMB.2024.3380352
Atanasoski V, Petrović JS, Popović Maneski L, Miletić M, Babić M, Nikolić A, Panescu D, Ivanović MD. A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals. in IEEE Open Journal of Engineering in Medicine and Biology. 2024;:1-10.
doi:10.1109/OJEMB.2024.3380352 .
Atanasoski, Vladimir, Petrović, Jovana S., Popović Maneski, Lana, Miletić, Marjan, Babić, Miloš, Nikolić, Aleksandra, Panescu, Dorin, Ivanović, Marija D., "A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals" in IEEE Open Journal of Engineering in Medicine and Biology (2024):1-10,
https://doi.org/10.1109/OJEMB.2024.3380352 . .

Changes in the physicochemical properties of geopolymer gels as a function of NaOH concentration

Nenadović, Miloš; Ivanović, Marija; Kisić, Danilo; Bundaleski, Nenad; Pavlović, Vera; Knežević, Sanja; Kljajević, Ljiljana

(2024)

TY  - JOUR
AU  - Nenadović, Miloš
AU  - Ivanović, Marija
AU  - Kisić, Danilo
AU  - Bundaleski, Nenad
AU  - Pavlović, Vera
AU  - Knežević, Sanja
AU  - Kljajević, Ljiljana
PY  - 2024
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12727
AB  - In the present paper, polymerization of alkali activated metakaolin (MK) and its structural changing, using 2M NaOH, 8M NaOH, and 16M NaOH solutions were followed by means of X-ray photoelectron spectroscopy (XPS), Diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), Raman spectroscopy and Scanning electron microscopy (SEM). XPS analysis revealed that changing of NaOH concentration did not affect the types of formed bonds in the material. At the same time, the amount of sodium and aluminum increased with the NaOH molarity. The latter steps could be especially interesting because it may indicate the possibility of 'dosing' the amount of Al incorporated by changing the NaOH concentration in the solution. DRIFT analysis revealed that the absorption band for AlIV located at 800 cm-1 is shifted towards the smaller values. Changing the concentration of NaOH, the chemical content did not change, but the structural changes are observed. Raman spectroscopy detected that the most dominant peaks at ∼400 cm-1 and 519 cm-1 originate from Si-O-Al and Si-O-Si bending modes. With increasing the NaOH concentration, peaks at 1019-1060 cm-1 become more prominent as a result of polymerization. Both analyzes (DRIFT and Raman) confirmed the presence of quartz. SEM analysis showed that different structures are created by changing the concentration of NaOH.
AB  - У овом раду, праћена је полимеризација алкално активираног метакаолина (МК) и његове структурне промене, коришћењем 2М NaOH, 8М NaOH и 16М раствора NaOH. Промене су праћене рендгенском фотоелектронском спектроскопијом (XPS), дифузном рефлексијом инфрацрвене Фуријеове трансформације (DRIFT), Рамановом спектроскопијом и скенирајућом електронском микроскопијом (SEM). XPS анализа је показала да промена концентрације NaOH није утицала на типове формираних веза у материјалу. Истовремено, количина натријума и алуминијума се повећавала са моларношћу NaOH. Последњи кораци могу бити посебно интересантни јер могу указивати на могућност 'дозирања' количине Al инкорпорираног променом концентрације NaOH у раствору. DRIFT анализа је открила да је опсег апсорпције за AlIV који се налази на 800 cm-1 померен ка мањим вредностима. Променом концентрације NaOH, хемијски садржај се није мењао, али су уочене структурне промене. Раманова спектроскопија је открила да најдоминантнији пикови на 400 cm-1 и 519 cm-1 потичу из Si-О-Al и Si-О-Si начина савијања хемијских веза. Са повећањем концентрације NaOH, пикови на 1019-1060 cm-1 постају све израженији као резултат полимеризације. Обе анализе (DRIFT и Раман) потврдиле су присуство кварца. SEM анализа је показала да се променом концентрације NaOH стварају различите структуре.
T2  - Science of Sintering
T1  - Changes in the physicochemical properties of geopolymer gels as a function of NaOH concentration
VL  - 55
IS  - 4
SP  - 509
EP  - 519
DO  - 10.2298/SOS220624020N
ER  - 
@article{
author = "Nenadović, Miloš and Ivanović, Marija and Kisić, Danilo and Bundaleski, Nenad and Pavlović, Vera and Knežević, Sanja and Kljajević, Ljiljana",
year = "2024",
abstract = "In the present paper, polymerization of alkali activated metakaolin (MK) and its structural changing, using 2M NaOH, 8M NaOH, and 16M NaOH solutions were followed by means of X-ray photoelectron spectroscopy (XPS), Diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), Raman spectroscopy and Scanning electron microscopy (SEM). XPS analysis revealed that changing of NaOH concentration did not affect the types of formed bonds in the material. At the same time, the amount of sodium and aluminum increased with the NaOH molarity. The latter steps could be especially interesting because it may indicate the possibility of 'dosing' the amount of Al incorporated by changing the NaOH concentration in the solution. DRIFT analysis revealed that the absorption band for AlIV located at 800 cm-1 is shifted towards the smaller values. Changing the concentration of NaOH, the chemical content did not change, but the structural changes are observed. Raman spectroscopy detected that the most dominant peaks at ∼400 cm-1 and 519 cm-1 originate from Si-O-Al and Si-O-Si bending modes. With increasing the NaOH concentration, peaks at 1019-1060 cm-1 become more prominent as a result of polymerization. Both analyzes (DRIFT and Raman) confirmed the presence of quartz. SEM analysis showed that different structures are created by changing the concentration of NaOH., У овом раду, праћена је полимеризација алкално активираног метакаолина (МК) и његове структурне промене, коришћењем 2М NaOH, 8М NaOH и 16М раствора NaOH. Промене су праћене рендгенском фотоелектронском спектроскопијом (XPS), дифузном рефлексијом инфрацрвене Фуријеове трансформације (DRIFT), Рамановом спектроскопијом и скенирајућом електронском микроскопијом (SEM). XPS анализа је показала да промена концентрације NaOH није утицала на типове формираних веза у материјалу. Истовремено, количина натријума и алуминијума се повећавала са моларношћу NaOH. Последњи кораци могу бити посебно интересантни јер могу указивати на могућност 'дозирања' количине Al инкорпорираног променом концентрације NaOH у раствору. DRIFT анализа је открила да је опсег апсорпције за AlIV који се налази на 800 cm-1 померен ка мањим вредностима. Променом концентрације NaOH, хемијски садржај се није мењао, али су уочене структурне промене. Раманова спектроскопија је открила да најдоминантнији пикови на 400 cm-1 и 519 cm-1 потичу из Si-О-Al и Si-О-Si начина савијања хемијских веза. Са повећањем концентрације NaOH, пикови на 1019-1060 cm-1 постају све израженији као резултат полимеризације. Обе анализе (DRIFT и Раман) потврдиле су присуство кварца. SEM анализа је показала да се променом концентрације NaOH стварају различите структуре.",
journal = "Science of Sintering",
title = "Changes in the physicochemical properties of geopolymer gels as a function of NaOH concentration",
volume = "55",
number = "4",
pages = "509-519",
doi = "10.2298/SOS220624020N"
}
Nenadović, M., Ivanović, M., Kisić, D., Bundaleski, N., Pavlović, V., Knežević, S.,& Kljajević, L.. (2024). Changes in the physicochemical properties of geopolymer gels as a function of NaOH concentration. in Science of Sintering, 55(4), 509-519.
https://doi.org/10.2298/SOS220624020N
Nenadović M, Ivanović M, Kisić D, Bundaleski N, Pavlović V, Knežević S, Kljajević L. Changes in the physicochemical properties of geopolymer gels as a function of NaOH concentration. in Science of Sintering. 2024;55(4):509-519.
doi:10.2298/SOS220624020N .
Nenadović, Miloš, Ivanović, Marija, Kisić, Danilo, Bundaleski, Nenad, Pavlović, Vera, Knežević, Sanja, Kljajević, Ljiljana, "Changes in the physicochemical properties of geopolymer gels as a function of NaOH concentration" in Science of Sintering, 55, no. 4 (2024):509-519,
https://doi.org/10.2298/SOS220624020N . .

Autocorrelation for denoising biomedical signals

Atanasoski, Vladimir; Lazović, Aleksandar; Ivanović, Marija; Hadžievski, Ljupčo; Bojović, Boško; Petrović, Jovana

(Belgrade : Institute of Physics, 2023)

TY  - CONF
AU  - Atanasoski, Vladimir
AU  - Lazović, Aleksandar
AU  - Ivanović, Marija
AU  - Hadžievski, Ljupčo
AU  - Bojović, Boško
AU  - Petrović, Jovana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13045
AB  - Photoplethysmography (PPG) has become a standard method for assessment of blood volume changes in clinical care and heart rate in home care [1]. Besides the pulse rate, PPG pulse forms carry signatures of diagnostically relevant events in cardiac cycle and can be used to estimate arterial stiffness. Extraction of these features requires removal of noise, motion artifacts and the superimposed slow varying signals, such as that from breathing, from the signal while preserving pulse morphology. However, modern filtering methods often fail to reproduce all signal features. Here, we propose a novel noise–removal method based on autocorrelation. Autocorrelation is a well-known method used in optics, mainly for estimating the duration of ultrashort laser pulses. We used autocorrelation to remove the noise and baseline wander (BLW) from a set of bioelectrical signals, namely electrocardiogram (ECG) and PPG. These signals comprise pulses (or beats) repeated in time but with slight changes. When we record several such beats and by averaging them get a noise-free signal with distorted morphology. However, taking a few steps further, namely subtracting the average from the original signal and filtering the difference in the frequency domain, enables the noise and BLW extraction from the original signal and reproduction of a faithful noise-free signal. We tested this method on the private ECG database, where added BLW component is from public MIT-NST database, and on the private PPG signals. The results show the superiority of our approach compared to the conventional cubic spline (CSP) method.
PB  - Belgrade : Institute of Physics
C3  - 16th Photonics Workshop : Book of abstracts
T1  - Autocorrelation for denoising biomedical signals
SP  - 25
EP  - 25
UR  - https://hdl.handle.net/21.15107/rcub_vinar_13045
ER  - 
@conference{
author = "Atanasoski, Vladimir and Lazović, Aleksandar and Ivanović, Marija and Hadžievski, Ljupčo and Bojović, Boško and Petrović, Jovana",
year = "2023",
abstract = "Photoplethysmography (PPG) has become a standard method for assessment of blood volume changes in clinical care and heart rate in home care [1]. Besides the pulse rate, PPG pulse forms carry signatures of diagnostically relevant events in cardiac cycle and can be used to estimate arterial stiffness. Extraction of these features requires removal of noise, motion artifacts and the superimposed slow varying signals, such as that from breathing, from the signal while preserving pulse morphology. However, modern filtering methods often fail to reproduce all signal features. Here, we propose a novel noise–removal method based on autocorrelation. Autocorrelation is a well-known method used in optics, mainly for estimating the duration of ultrashort laser pulses. We used autocorrelation to remove the noise and baseline wander (BLW) from a set of bioelectrical signals, namely electrocardiogram (ECG) and PPG. These signals comprise pulses (or beats) repeated in time but with slight changes. When we record several such beats and by averaging them get a noise-free signal with distorted morphology. However, taking a few steps further, namely subtracting the average from the original signal and filtering the difference in the frequency domain, enables the noise and BLW extraction from the original signal and reproduction of a faithful noise-free signal. We tested this method on the private ECG database, where added BLW component is from public MIT-NST database, and on the private PPG signals. The results show the superiority of our approach compared to the conventional cubic spline (CSP) method.",
publisher = "Belgrade : Institute of Physics",
journal = "16th Photonics Workshop : Book of abstracts",
title = "Autocorrelation for denoising biomedical signals",
pages = "25-25",
url = "https://hdl.handle.net/21.15107/rcub_vinar_13045"
}
Atanasoski, V., Lazović, A., Ivanović, M., Hadžievski, L., Bojović, B.,& Petrović, J.. (2023). Autocorrelation for denoising biomedical signals. in 16th Photonics Workshop : Book of abstracts
Belgrade : Institute of Physics., 25-25.
https://hdl.handle.net/21.15107/rcub_vinar_13045
Atanasoski V, Lazović A, Ivanović M, Hadžievski L, Bojović B, Petrović J. Autocorrelation for denoising biomedical signals. in 16th Photonics Workshop : Book of abstracts. 2023;:25-25.
https://hdl.handle.net/21.15107/rcub_vinar_13045 .
Atanasoski, Vladimir, Lazović, Aleksandar, Ivanović, Marija, Hadžievski, Ljupčo, Bojović, Boško, Petrović, Jovana, "Autocorrelation for denoising biomedical signals" in 16th Photonics Workshop : Book of abstracts (2023):25-25,
https://hdl.handle.net/21.15107/rcub_vinar_13045 .

Photoplethysmogram as a source of biomarkers for AI-based diagnosis of heart failure

Tadić, Predrag; Petrović, Jovana; Đorđević, Natalija; Ivanović, Marija; Lazović, Aleksandar; Vukčević, Vladan; Ristić, Arsen; Hadžievski, Ljupčo

(Belgrade : Institute of Physics, 2023)

TY  - CONF
AU  - Tadić, Predrag
AU  - Petrović, Jovana
AU  - Đorđević, Natalija
AU  - Ivanović, Marija
AU  - Lazović, Aleksandar
AU  - Vukčević, Vladan
AU  - Ristić, Arsen
AU  - Hadžievski, Ljupčo
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/13044
AB  - We present our progress on the “Multi-SENSor SysteM and ARTificial intelligence in service of heart failure diagnosis (SensSmart)” project, which was introduced at the last year’s edition of the Workshop [1]. The goal of the SensSmart project is to enable early diagnosis of heart failure, through the development of: 1) a multi-sensor polycardiograph apparatus (PCG) that produces simultaneous acquisition of the subject’s electrocardiogram (ECG), photoplethysmogram (PPG), heart sounds, and heart movements, and 2) AI-assisted analysis of the acquired signals. This presentation is going to focus on the acquisition and processing of PPG signals. PPG is obtained by using a pulse oximeter which illuminates the skin and measures the changes in light absorption, thereby enabling the detection of blood volume changes in the vessels. Our PCG apparatus measures the blood flow through the brachial, radial, and carotid arteries. During each heartbeat, the generated waveform typically exhibits several characteristic points [2]. The magnitudes and time distances between these points are useful indicators of many cardiac conditions, including heart failure [3]. However, the inter-patient variability of the PPG waveform makes it challenging to derive simple rule-based diagnostic procedures. This has led many researchers to turn to statistical or machine learning methods for processing of PPG signals [4].  In this presentation, we give an overview of AI-based signal processing methods for PPG, and present some preliminary results and challenges in extracting features from real-world signals obtained using our PCG.
PB  - Belgrade : Institute of Physics
C3  - 16th Photonics Workshop : Book of abstracts
T1  - Photoplethysmogram as a source of biomarkers  for AI-based diagnosis of heart failure
SP  - 24
EP  - 24
UR  - https://hdl.handle.net/21.15107/rcub_vinar_13044
ER  - 
@conference{
author = "Tadić, Predrag and Petrović, Jovana and Đorđević, Natalija and Ivanović, Marija and Lazović, Aleksandar and Vukčević, Vladan and Ristić, Arsen and Hadžievski, Ljupčo",
year = "2023",
abstract = "We present our progress on the “Multi-SENSor SysteM and ARTificial intelligence in service of heart failure diagnosis (SensSmart)” project, which was introduced at the last year’s edition of the Workshop [1]. The goal of the SensSmart project is to enable early diagnosis of heart failure, through the development of: 1) a multi-sensor polycardiograph apparatus (PCG) that produces simultaneous acquisition of the subject’s electrocardiogram (ECG), photoplethysmogram (PPG), heart sounds, and heart movements, and 2) AI-assisted analysis of the acquired signals. This presentation is going to focus on the acquisition and processing of PPG signals. PPG is obtained by using a pulse oximeter which illuminates the skin and measures the changes in light absorption, thereby enabling the detection of blood volume changes in the vessels. Our PCG apparatus measures the blood flow through the brachial, radial, and carotid arteries. During each heartbeat, the generated waveform typically exhibits several characteristic points [2]. The magnitudes and time distances between these points are useful indicators of many cardiac conditions, including heart failure [3]. However, the inter-patient variability of the PPG waveform makes it challenging to derive simple rule-based diagnostic procedures. This has led many researchers to turn to statistical or machine learning methods for processing of PPG signals [4].  In this presentation, we give an overview of AI-based signal processing methods for PPG, and present some preliminary results and challenges in extracting features from real-world signals obtained using our PCG.",
publisher = "Belgrade : Institute of Physics",
journal = "16th Photonics Workshop : Book of abstracts",
title = "Photoplethysmogram as a source of biomarkers  for AI-based diagnosis of heart failure",
pages = "24-24",
url = "https://hdl.handle.net/21.15107/rcub_vinar_13044"
}
Tadić, P., Petrović, J., Đorđević, N., Ivanović, M., Lazović, A., Vukčević, V., Ristić, A.,& Hadžievski, L.. (2023). Photoplethysmogram as a source of biomarkers  for AI-based diagnosis of heart failure. in 16th Photonics Workshop : Book of abstracts
Belgrade : Institute of Physics., 24-24.
https://hdl.handle.net/21.15107/rcub_vinar_13044
Tadić P, Petrović J, Đorđević N, Ivanović M, Lazović A, Vukčević V, Ristić A, Hadžievski L. Photoplethysmogram as a source of biomarkers  for AI-based diagnosis of heart failure. in 16th Photonics Workshop : Book of abstracts. 2023;:24-24.
https://hdl.handle.net/21.15107/rcub_vinar_13044 .
Tadić, Predrag, Petrović, Jovana, Đorđević, Natalija, Ivanović, Marija, Lazović, Aleksandar, Vukčević, Vladan, Ristić, Arsen, Hadžievski, Ljupčo, "Photoplethysmogram as a source of biomarkers  for AI-based diagnosis of heart failure" in 16th Photonics Workshop : Book of abstracts (2023):24-24,
https://hdl.handle.net/21.15107/rcub_vinar_13044 .

A database of simultaneously recorded ECG signals with and without EMG noise

Atanasoski, Vladimir; Petrović, Jovana; Popović Maneski, Lana; Miletić, Marjan; Babić, Miloš; Nikolić, Aleksandra; Panescu, Dorin; Ivanović, Marija D.

(2023)

TY  - JOUR
AU  - Atanasoski, Vladimir
AU  - Petrović, Jovana
AU  - Popović Maneski, Lana
AU  - Miletić, Marjan
AU  - Babić, Miloš
AU  - Nikolić, Aleksandra
AU  - Panescu, Dorin
AU  - Ivanović, Marija D.
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12047
AB  - Goal: Noise on recorded electrocardiographic (ECG) signals may affect their clinical interpretation. Electromyographic (EMG) noise spectrally coincides with the QRS complex, which makes its removal particularly challenging. The problem of evaluating the noise-removal techniques has commonly been approached by algorithm testing on the contaminated ECG signals constructed ad hoc as an additive mixture of a noise-free ECG signal and noise. Consequently, there is an absence of a unique/standard database for testing and comparing different denoising methods. We present a SimEMG database recorded by a novel acquisition method that allows for direct recording of the genuine EMG-noise-free and -contaminated ECG signals. The database is available as open source.
T2  - IEEE Open Journal of Engineering in Medicine and Biology
T1  - A database of simultaneously recorded ECG signals with and without EMG noise
SP  - 1
EP  - 4
DO  - 10.1109/OJEMB.2023.3330295
ER  - 
@article{
author = "Atanasoski, Vladimir and Petrović, Jovana and Popović Maneski, Lana and Miletić, Marjan and Babić, Miloš and Nikolić, Aleksandra and Panescu, Dorin and Ivanović, Marija D.",
year = "2023",
abstract = "Goal: Noise on recorded electrocardiographic (ECG) signals may affect their clinical interpretation. Electromyographic (EMG) noise spectrally coincides with the QRS complex, which makes its removal particularly challenging. The problem of evaluating the noise-removal techniques has commonly been approached by algorithm testing on the contaminated ECG signals constructed ad hoc as an additive mixture of a noise-free ECG signal and noise. Consequently, there is an absence of a unique/standard database for testing and comparing different denoising methods. We present a SimEMG database recorded by a novel acquisition method that allows for direct recording of the genuine EMG-noise-free and -contaminated ECG signals. The database is available as open source.",
journal = "IEEE Open Journal of Engineering in Medicine and Biology",
title = "A database of simultaneously recorded ECG signals with and without EMG noise",
pages = "1-4",
doi = "10.1109/OJEMB.2023.3330295"
}
Atanasoski, V., Petrović, J., Popović Maneski, L., Miletić, M., Babić, M., Nikolić, A., Panescu, D.,& Ivanović, M. D.. (2023). A database of simultaneously recorded ECG signals with and without EMG noise. in IEEE Open Journal of Engineering in Medicine and Biology, 1-4.
https://doi.org/10.1109/OJEMB.2023.3330295
Atanasoski V, Petrović J, Popović Maneski L, Miletić M, Babić M, Nikolić A, Panescu D, Ivanović MD. A database of simultaneously recorded ECG signals with and without EMG noise. in IEEE Open Journal of Engineering in Medicine and Biology. 2023;:1-4.
doi:10.1109/OJEMB.2023.3330295 .
Atanasoski, Vladimir, Petrović, Jovana, Popović Maneski, Lana, Miletić, Marjan, Babić, Miloš, Nikolić, Aleksandra, Panescu, Dorin, Ivanović, Marija D., "A database of simultaneously recorded ECG signals with and without EMG noise" in IEEE Open Journal of Engineering in Medicine and Biology (2023):1-4,
https://doi.org/10.1109/OJEMB.2023.3330295 . .

Physico-Chemical Properties of Geopolymers Based on Metakaolin with The Addition of Organic Phase PVA

Ivanović, Marija; Knežević, Sanja; Mirković, Miljana; Kljajević, Ljiljana; Nenadović, Miloš; Mladenović Nikolić, Nataša; Nenadović, Snežana

(Society of Chemists and Technologists of Macedonia, 2023)

TY  - CONF
AU  - Ivanović, Marija
AU  - Knežević, Sanja
AU  - Mirković, Miljana
AU  - Kljajević, Ljiljana
AU  - Nenadović, Miloš
AU  - Mladenović Nikolić, Nataša
AU  - Nenadović, Snežana
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11756
AB  - Recently, there has been a growing interest in mixing two different systems, organic and inorganic, which would contribute to some improved properties, such as adjustment time, reduced shrinkage, improved mechanical properties and durability. A new class of geopolymer composites with an organic matrix has been developed with the main goal of improving the fire resistance of organic polymers and reducing the production of smoke resulting from their combustion, as well as improving mechanical properties. For the synthesis of hybrid geopolymer materials, metakaolin with the addition of organic phase poly (vinyl alcohol) (PVA) was used as the starting material. For the synthesis of alkaline activator, a solution of NaOH with a molarity of 12 mol / dm3 was used. The chemical composition of the samples was determined by XRF analysis. Structural and phase characterization of hybrid and reference materials were analyzed using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR), which revealed new phases in the PVA-added samples. The results show that the content of added PVA in the reaction mixture affects the phase composition of the synthesized materials. The morphology was analyzed using a scanning electron microscope with energy dispersive spectroscopy (SEM/EDS), where efflorescence was observed and identified. After characterizing the geopolymer with the addition of PVA, we obtained a material that is far more porous than the basic sample, and we can conclude that we have synthesized a material that shows good mechanical properties.
PB  - Society of Chemists and Technologists of Macedonia
C3  - 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia
T1  - Physico-Chemical Properties of Geopolymers Based on Metakaolin with The Addition of Organic Phase PVA
SP  - 32
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11756
ER  - 
@conference{
author = "Ivanović, Marija and Knežević, Sanja and Mirković, Miljana and Kljajević, Ljiljana and Nenadović, Miloš and Mladenović Nikolić, Nataša and Nenadović, Snežana",
year = "2023",
abstract = "Recently, there has been a growing interest in mixing two different systems, organic and inorganic, which would contribute to some improved properties, such as adjustment time, reduced shrinkage, improved mechanical properties and durability. A new class of geopolymer composites with an organic matrix has been developed with the main goal of improving the fire resistance of organic polymers and reducing the production of smoke resulting from their combustion, as well as improving mechanical properties. For the synthesis of hybrid geopolymer materials, metakaolin with the addition of organic phase poly (vinyl alcohol) (PVA) was used as the starting material. For the synthesis of alkaline activator, a solution of NaOH with a molarity of 12 mol / dm3 was used. The chemical composition of the samples was determined by XRF analysis. Structural and phase characterization of hybrid and reference materials were analyzed using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR), which revealed new phases in the PVA-added samples. The results show that the content of added PVA in the reaction mixture affects the phase composition of the synthesized materials. The morphology was analyzed using a scanning electron microscope with energy dispersive spectroscopy (SEM/EDS), where efflorescence was observed and identified. After characterizing the geopolymer with the addition of PVA, we obtained a material that is far more porous than the basic sample, and we can conclude that we have synthesized a material that shows good mechanical properties.",
publisher = "Society of Chemists and Technologists of Macedonia",
journal = "26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia",
title = "Physico-Chemical Properties of Geopolymers Based on Metakaolin with The Addition of Organic Phase PVA",
pages = "32-32",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11756"
}
Ivanović, M., Knežević, S., Mirković, M., Kljajević, L., Nenadović, M., Mladenović Nikolić, N.,& Nenadović, S.. (2023). Physico-Chemical Properties of Geopolymers Based on Metakaolin with The Addition of Organic Phase PVA. in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia
Society of Chemists and Technologists of Macedonia., 32-32.
https://hdl.handle.net/21.15107/rcub_vinar_11756
Ivanović M, Knežević S, Mirković M, Kljajević L, Nenadović M, Mladenović Nikolić N, Nenadović S. Physico-Chemical Properties of Geopolymers Based on Metakaolin with The Addition of Organic Phase PVA. in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia. 2023;:32-32.
https://hdl.handle.net/21.15107/rcub_vinar_11756 .
Ivanović, Marija, Knežević, Sanja, Mirković, Miljana, Kljajević, Ljiljana, Nenadović, Miloš, Mladenović Nikolić, Nataša, Nenadović, Snežana, "Physico-Chemical Properties of Geopolymers Based on Metakaolin with The Addition of Organic Phase PVA" in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia (2023):32-32,
https://hdl.handle.net/21.15107/rcub_vinar_11756 .

Radiological and structural analysis of aluminosilicate materials incorporated with samarium (III)-oxide

Knežević, Sanja; Nenadović, Miloš; Potočnik, Jelena; Kisić, Danilo; Rajačić, Milica; Nenadović, Snežana; Ivanović, Marija

(Belgrade : Institute of Technical Sciences of SASA, 2023)

TY  - CONF
AU  - Knežević, Sanja
AU  - Nenadović, Miloš
AU  - Potočnik, Jelena
AU  - Kisić, Danilo
AU  - Rajačić, Milica
AU  - Nenadović, Snežana
AU  - Ivanović, Marija
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12326
AB  - This study focused on analyzing samples of aluminosilicate materials in which different percentages of samarium (III)-oxide were incorporated. Basic samples and thermally treated samples at 600 °C were analyzed. Introducing samarium (III)-oxide into the polymer matrix of aluminosilicates has been demonstrated to alter the fundamental structure of aluminosilicate materials. Interestingly, at elevated temperatures, these materials exhibit even more distinctive properties. The gamma ray spectrometric analysis results were used to conduct radiological analysis. Different methods monitor physico-chemical changes within the aluminosilicate materials. By introducing Sm3+ into the aluminosilicate matrix, the basic structure of the aluminosilicate is disturbed. The DRIFT method was used to analyze the structural properties. The analysis of the microstructural properties of the selected samples was carried out using a scanning electron microscope (SEM) and enabled the examination of the fine details of the structure of the materials thermally treated at 600 °C which resulted in the appearance of significant pores and cracks in the material.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
T1  - Radiological and structural analysis of aluminosilicate materials incorporated with samarium (III)-oxide
SP  - 55
EP  - 55
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12326
ER  - 
@conference{
author = "Knežević, Sanja and Nenadović, Miloš and Potočnik, Jelena and Kisić, Danilo and Rajačić, Milica and Nenadović, Snežana and Ivanović, Marija",
year = "2023",
abstract = "This study focused on analyzing samples of aluminosilicate materials in which different percentages of samarium (III)-oxide were incorporated. Basic samples and thermally treated samples at 600 °C were analyzed. Introducing samarium (III)-oxide into the polymer matrix of aluminosilicates has been demonstrated to alter the fundamental structure of aluminosilicate materials. Interestingly, at elevated temperatures, these materials exhibit even more distinctive properties. The gamma ray spectrometric analysis results were used to conduct radiological analysis. Different methods monitor physico-chemical changes within the aluminosilicate materials. By introducing Sm3+ into the aluminosilicate matrix, the basic structure of the aluminosilicate is disturbed. The DRIFT method was used to analyze the structural properties. The analysis of the microstructural properties of the selected samples was carried out using a scanning electron microscope (SEM) and enabled the examination of the fine details of the structure of the materials thermally treated at 600 °C which resulted in the appearance of significant pores and cracks in the material.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts",
title = "Radiological and structural analysis of aluminosilicate materials incorporated with samarium (III)-oxide",
pages = "55-55",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12326"
}
Knežević, S., Nenadović, M., Potočnik, J., Kisić, D., Rajačić, M., Nenadović, S.,& Ivanović, M.. (2023). Radiological and structural analysis of aluminosilicate materials incorporated with samarium (III)-oxide. in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
Belgrade : Institute of Technical Sciences of SASA., 55-55.
https://hdl.handle.net/21.15107/rcub_vinar_12326
Knežević S, Nenadović M, Potočnik J, Kisić D, Rajačić M, Nenadović S, Ivanović M. Radiological and structural analysis of aluminosilicate materials incorporated with samarium (III)-oxide. in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts. 2023;:55-55.
https://hdl.handle.net/21.15107/rcub_vinar_12326 .
Knežević, Sanja, Nenadović, Miloš, Potočnik, Jelena, Kisić, Danilo, Rajačić, Milica, Nenadović, Snežana, Ivanović, Marija, "Radiological and structural analysis of aluminosilicate materials incorporated with samarium (III)-oxide" in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts (2023):55-55,
https://hdl.handle.net/21.15107/rcub_vinar_12326 .

Crosslinking of rare earth ions into aluminosilicate inorganic polymer

Knežević, Sanja; Ivanović, Marija; Kljajević, Ljiljana M.; Nenadović, Snežana S.; Potočnik, Jelena; Mirković, Miljana M.; Nenadović, Miloš

(Belgrade : Serbian Ceramic Society, 2022)

TY  - CONF
AU  - Knežević, Sanja
AU  - Ivanović, Marija
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Snežana S.
AU  - Potočnik, Jelena
AU  - Mirković, Miljana M.
AU  - Nenadović, Miloš
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10803
AB  - Rare earth oxides have been broadly utilised in different research areas due to their unique properties. This research aims to examine the effect of Nd and Sm in the form of oxide addition in the metakaolin-based geopolymer matrix. Metakaolin-based geopolymers with the addition of different percentages of Sm2O3 and Nd2O3 (S1-S6) were synthesised. Samples contained 0.1% Sm; 1% Sm; 5% Sm, and 0.1% Nd, 1% Nd, and 5% Nd. The focus was on monitoring the polymerisation process using the DRIFT method for 7, 14, 21 and 28 days. The phase composition of the samples was confirmed by the XRD method, while the morphology of the samples was analysed by SEM analysis. After 28 days, due to the polymerisation process, the binding of Neodymium and Samarium ions were incorporated into the structure.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade
T1  - Crosslinking of rare earth ions into aluminosilicate inorganic polymer
SP  - 72
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10803
ER  - 
@conference{
author = "Knežević, Sanja and Ivanović, Marija and Kljajević, Ljiljana M. and Nenadović, Snežana S. and Potočnik, Jelena and Mirković, Miljana M. and Nenadović, Miloš",
year = "2022",
abstract = "Rare earth oxides have been broadly utilised in different research areas due to their unique properties. This research aims to examine the effect of Nd and Sm in the form of oxide addition in the metakaolin-based geopolymer matrix. Metakaolin-based geopolymers with the addition of different percentages of Sm2O3 and Nd2O3 (S1-S6) were synthesised. Samples contained 0.1% Sm; 1% Sm; 5% Sm, and 0.1% Nd, 1% Nd, and 5% Nd. The focus was on monitoring the polymerisation process using the DRIFT method for 7, 14, 21 and 28 days. The phase composition of the samples was confirmed by the XRD method, while the morphology of the samples was analysed by SEM analysis. After 28 days, due to the polymerisation process, the binding of Neodymium and Samarium ions were incorporated into the structure.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade",
title = "Crosslinking of rare earth ions into aluminosilicate inorganic polymer",
pages = "72",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10803"
}
Knežević, S., Ivanović, M., Kljajević, L. M., Nenadović, S. S., Potočnik, J., Mirković, M. M.,& Nenadović, M.. (2022). Crosslinking of rare earth ions into aluminosilicate inorganic polymer. in Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade
Belgrade : Serbian Ceramic Society., 72.
https://hdl.handle.net/21.15107/rcub_vinar_10803
Knežević S, Ivanović M, Kljajević LM, Nenadović SS, Potočnik J, Mirković MM, Nenadović M. Crosslinking of rare earth ions into aluminosilicate inorganic polymer. in Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade. 2022;:72.
https://hdl.handle.net/21.15107/rcub_vinar_10803 .
Knežević, Sanja, Ivanović, Marija, Kljajević, Ljiljana M., Nenadović, Snežana S., Potočnik, Jelena, Mirković, Miljana M., Nenadović, Miloš, "Crosslinking of rare earth ions into aluminosilicate inorganic polymer" in Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade (2022):72,
https://hdl.handle.net/21.15107/rcub_vinar_10803 .

Aluminosilicate matrix of alkali activated mixture of metakaolin/fly ash and wood ash/metakaolin

Mladenović Nikolić, Nataša; Knežević, Sanja; Ivanović, Marija; Nenadović, Snežana S.; Mirković, Miljana M.; Pavlović, Vladimir B.; Kljajević, Ljiljana M.

(Belgrade : Serbian Ceramic Society, 2022)

TY  - CONF
AU  - Mladenović Nikolić, Nataša
AU  - Knežević, Sanja
AU  - Ivanović, Marija
AU  - Nenadović, Snežana S.
AU  - Mirković, Miljana M.
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana M.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10805
AB  - Presented research related to the structure of a different kind of alumosilicate matrix of alkali activated materials (AAM). Fly ash (FA), wood ash (WA) and metakaolin (MK) were used as a solid precursors of final AAM samples. Synthesis of the AAM was conducted by mixing in a determined ratio solid precursors and an alkali activator (sodium silicate solution, NaOH solutions concentration-4 mol dm-3 and 12 mol dm-3 ). AAM samples were synthesized by a two-component system: MK/FA and WA/MK. The ratio of components MK/FA and WA/MK was 0.9. The AAM samples were cured at determined laboratory conditions (time, temperature, humidity, aging) in covering mold. The X-ray diffraction (XRD), Diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and Scanning Electron Microscopy (SEM) were provided to the samples after twenty-eight days of geopolymerization process. The higher background of both MK/FA and WA/MK based AAM samples indicates the achievement of amorphization during the geopolymerization process. In investigated samples, the characteristic stretching asymmetric vibrations C=O, and carbonate vibrations were expected in highly alkaline FA/MK and WA/MK mixture. SEM morphology of all AAM samples noticed an amorphous phase with irregularly distributed, agglomerated particles, and some crystal phases originating from raw materials on the surface alumosilicate matrix.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade
T1  - Aluminosilicate matrix of alkali activated mixture of metakaolin/fly ash and wood ash/metakaolin
SP  - 73
EP  - 74
UR  - https://hdl.handle.net/21.15107/rcub_vinar_10805
ER  - 
@conference{
author = "Mladenović Nikolić, Nataša and Knežević, Sanja and Ivanović, Marija and Nenadović, Snežana S. and Mirković, Miljana M. and Pavlović, Vladimir B. and Kljajević, Ljiljana M.",
year = "2022",
abstract = "Presented research related to the structure of a different kind of alumosilicate matrix of alkali activated materials (AAM). Fly ash (FA), wood ash (WA) and metakaolin (MK) were used as a solid precursors of final AAM samples. Synthesis of the AAM was conducted by mixing in a determined ratio solid precursors and an alkali activator (sodium silicate solution, NaOH solutions concentration-4 mol dm-3 and 12 mol dm-3 ). AAM samples were synthesized by a two-component system: MK/FA and WA/MK. The ratio of components MK/FA and WA/MK was 0.9. The AAM samples were cured at determined laboratory conditions (time, temperature, humidity, aging) in covering mold. The X-ray diffraction (XRD), Diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and Scanning Electron Microscopy (SEM) were provided to the samples after twenty-eight days of geopolymerization process. The higher background of both MK/FA and WA/MK based AAM samples indicates the achievement of amorphization during the geopolymerization process. In investigated samples, the characteristic stretching asymmetric vibrations C=O, and carbonate vibrations were expected in highly alkaline FA/MK and WA/MK mixture. SEM morphology of all AAM samples noticed an amorphous phase with irregularly distributed, agglomerated particles, and some crystal phases originating from raw materials on the surface alumosilicate matrix.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade",
title = "Aluminosilicate matrix of alkali activated mixture of metakaolin/fly ash and wood ash/metakaolin",
pages = "73-74",
url = "https://hdl.handle.net/21.15107/rcub_vinar_10805"
}
Mladenović Nikolić, N., Knežević, S., Ivanović, M., Nenadović, S. S., Mirković, M. M., Pavlović, V. B.,& Kljajević, L. M.. (2022). Aluminosilicate matrix of alkali activated mixture of metakaolin/fly ash and wood ash/metakaolin. in Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade
Belgrade : Serbian Ceramic Society., 73-74.
https://hdl.handle.net/21.15107/rcub_vinar_10805
Mladenović Nikolić N, Knežević S, Ivanović M, Nenadović SS, Mirković MM, Pavlović VB, Kljajević LM. Aluminosilicate matrix of alkali activated mixture of metakaolin/fly ash and wood ash/metakaolin. in Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade. 2022;:73-74.
https://hdl.handle.net/21.15107/rcub_vinar_10805 .
Mladenović Nikolić, Nataša, Knežević, Sanja, Ivanović, Marija, Nenadović, Snežana S., Mirković, Miljana M., Pavlović, Vladimir B., Kljajević, Ljiljana M., "Aluminosilicate matrix of alkali activated mixture of metakaolin/fly ash and wood ash/metakaolin" in Advanced Ceramics and Application : 10th Serbian Ceramic Society Conference : program and the book of abstracts; September 26-27, 2022; Belgrade (2022):73-74,
https://hdl.handle.net/21.15107/rcub_vinar_10805 .

The influence of atrial flutter in automated detection of atrial arrhythmias - are we ready to go into clinical practice?”

Domazetoski, Viktor; Gligorić, Goran; Marinković, Milan; Shvilkin, Alexei; Kršić, Jelena; Kocarev, Ljupčo; Ivanović, Marija D.

(2022)

TY  - JOUR
AU  - Domazetoski, Viktor
AU  - Gligorić, Goran
AU  - Marinković, Milan
AU  - Shvilkin, Alexei
AU  - Kršić, Jelena
AU  - Kocarev, Ljupčo
AU  - Ivanović, Marija D.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10302
AB  - ObjectiveTo investigate the impact of atrial flutter (Afl) in the atrial arrhythmias classification task. We additionally advocate the use of a subject-based split for future studies in the field in order to avoid within-subject correlation which may lead to over-optimistic inferences. Finally, we demonstrate the effectiveness of the classifiers outside of the initially studied circumstances, by performing an inter-dataset model evaluation of the classifiers in data from different sources.MethodsECG signals of two private and three public (two MIT-BIH and Chapman ecgdb) databases were preprocessed and divided into 10s segments which were then subject to feature extraction. The created datasets were divided into a training and test set in two ways, based on a random split and a patient split. Classification was performed using the XGBoost classifier, as well as two benchmark classification models using both data splits. The trained models were then used to make predictions on the test data of the remaining datasets.ResultsThe XGBoost model yielded the best performance across all datasets compared to the remaining benchmark models, however variability in model performance was seen across datasets, with accuracy ranging from 70.6% to 89.4%, sensitivity ranging from 61.4% to 76.8%, and specificity ranging from 87.3% to 95.5%. When comparing the results between the patient and the random split, no significant difference was seen in the two private datasets and the Chapman dataset, where the number of samples per patient is low. Nonetheless, in the MIT-BIH dataset, where the average number of samples per patient is approximately 1300, a noticeable disparity was identified. The accuracy, sensitivity, and specificity of the random split in this dataset of 93.6%, 86.4%, and 95.9% respectively, were decreased to 88%, 61.4%, and 89.8% in the patient split, with the largest drop being in Afl sensitivity, from 71% to 5.4%. The inter-dataset scores were also significantly lower than their intra-dataset counterparts across all datasets.ConclusionsCAD systems have great potential in the assistance of physicians in reliable, precise and efficient detection of arrhythmias. However, although compelling research has been done in the field, yielding models with excellent performances on their datasets, we show that these results may be over-optimistic. In our study, we give insight into the difficulty of detection of Afl on several datasets and show the need for a higher representation of Afl in public datasets. Furthermore, we show the necessity of a more structured evaluation of model performance through the use of a patient-based split and inter-dataset testing scheme to avoid the problem of within-subject correlation which may lead to misleadingly high scores. Finally, we stress the need for the creation and use of datasets with a higher number of patients and a more balanced representation of classes if we are to progress in this mission.
T2  - Computer Methods and Programs in Biomedicine
T1  - The influence of atrial flutter in automated detection of atrial arrhythmias - are we ready to go into clinical practice?”
VL  - 221
SP  - 106901
DO  - 10.1016/j.cmpb.2022.106901
ER  - 
@article{
author = "Domazetoski, Viktor and Gligorić, Goran and Marinković, Milan and Shvilkin, Alexei and Kršić, Jelena and Kocarev, Ljupčo and Ivanović, Marija D.",
year = "2022",
abstract = "ObjectiveTo investigate the impact of atrial flutter (Afl) in the atrial arrhythmias classification task. We additionally advocate the use of a subject-based split for future studies in the field in order to avoid within-subject correlation which may lead to over-optimistic inferences. Finally, we demonstrate the effectiveness of the classifiers outside of the initially studied circumstances, by performing an inter-dataset model evaluation of the classifiers in data from different sources.MethodsECG signals of two private and three public (two MIT-BIH and Chapman ecgdb) databases were preprocessed and divided into 10s segments which were then subject to feature extraction. The created datasets were divided into a training and test set in two ways, based on a random split and a patient split. Classification was performed using the XGBoost classifier, as well as two benchmark classification models using both data splits. The trained models were then used to make predictions on the test data of the remaining datasets.ResultsThe XGBoost model yielded the best performance across all datasets compared to the remaining benchmark models, however variability in model performance was seen across datasets, with accuracy ranging from 70.6% to 89.4%, sensitivity ranging from 61.4% to 76.8%, and specificity ranging from 87.3% to 95.5%. When comparing the results between the patient and the random split, no significant difference was seen in the two private datasets and the Chapman dataset, where the number of samples per patient is low. Nonetheless, in the MIT-BIH dataset, where the average number of samples per patient is approximately 1300, a noticeable disparity was identified. The accuracy, sensitivity, and specificity of the random split in this dataset of 93.6%, 86.4%, and 95.9% respectively, were decreased to 88%, 61.4%, and 89.8% in the patient split, with the largest drop being in Afl sensitivity, from 71% to 5.4%. The inter-dataset scores were also significantly lower than their intra-dataset counterparts across all datasets.ConclusionsCAD systems have great potential in the assistance of physicians in reliable, precise and efficient detection of arrhythmias. However, although compelling research has been done in the field, yielding models with excellent performances on their datasets, we show that these results may be over-optimistic. In our study, we give insight into the difficulty of detection of Afl on several datasets and show the need for a higher representation of Afl in public datasets. Furthermore, we show the necessity of a more structured evaluation of model performance through the use of a patient-based split and inter-dataset testing scheme to avoid the problem of within-subject correlation which may lead to misleadingly high scores. Finally, we stress the need for the creation and use of datasets with a higher number of patients and a more balanced representation of classes if we are to progress in this mission.",
journal = "Computer Methods and Programs in Biomedicine",
title = "The influence of atrial flutter in automated detection of atrial arrhythmias - are we ready to go into clinical practice?”",
volume = "221",
pages = "106901",
doi = "10.1016/j.cmpb.2022.106901"
}
Domazetoski, V., Gligorić, G., Marinković, M., Shvilkin, A., Kršić, J., Kocarev, L.,& Ivanović, M. D.. (2022). The influence of atrial flutter in automated detection of atrial arrhythmias - are we ready to go into clinical practice?”. in Computer Methods and Programs in Biomedicine, 221, 106901.
https://doi.org/10.1016/j.cmpb.2022.106901
Domazetoski V, Gligorić G, Marinković M, Shvilkin A, Kršić J, Kocarev L, Ivanović MD. The influence of atrial flutter in automated detection of atrial arrhythmias - are we ready to go into clinical practice?”. in Computer Methods and Programs in Biomedicine. 2022;221:106901.
doi:10.1016/j.cmpb.2022.106901 .
Domazetoski, Viktor, Gligorić, Goran, Marinković, Milan, Shvilkin, Alexei, Kršić, Jelena, Kocarev, Ljupčo, Ivanović, Marija D., "The influence of atrial flutter in automated detection of atrial arrhythmias - are we ready to go into clinical practice?”" in Computer Methods and Programs in Biomedicine, 221 (2022):106901,
https://doi.org/10.1016/j.cmpb.2022.106901 . .
3
1
1

ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients

Benini, Sergio; Ivanović, Marija D.; Savardi, Mattia; Kršić, Jelena; Hadžievski, Ljupčo; Baronio, Fabio

(2021)

TY  - JOUR
AU  - Benini, Sergio
AU  - Ivanović, Marija D.
AU  - Savardi, Mattia
AU  - Kršić, Jelena
AU  - Hadžievski, Ljupčo
AU  - Baronio, Fabio
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9547
AB  - The provided database of 260 ECG signals was collected from patients with out-of-hospital cardiac arrest while treated by the emergency medical services. Each ECG signal contains a 9 second waveform showing ventricular fibrillation, followed by 1 min of post-shock waveform. Patients’ ECGs are made available in multiple formats. All ECGs recorded during the prehospital treatment are provided in PFD files, after being anonymized, printed in paper, and scanned. For each ECG, the dataset also includes the whole digitized waveform (9 s pre- and 1 min post-shock each) and numerous features in temporal and frequency domain extracted from the 9 s episode immediately prior to the first defibrillation shock. Based on the shock outcome, each ECG file has been annotated by three expert cardiologists, - using majority decision -, as successful (56 cases), unsuccessful (195 cases), or indeterminable (9 cases). The code for preprocessing, for feature extraction, and for limiting the investigation to different temporal intervals before the shock is also provided. These data could be reused to design algorithms to predict shock outcome based on ventricular fibrillation analysis, with the goal to optimize the defibrillation strategy (immediate defibrillation versus cardiopulmonary resuscitation and/or drug administration) for enhancing resuscitation. © 2020
T2  - Data in Brief
T1  - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients
VL  - 34
SP  - 106635
DO  - 10.1016/j.dib.2020.106635
ER  - 
@article{
author = "Benini, Sergio and Ivanović, Marija D. and Savardi, Mattia and Kršić, Jelena and Hadžievski, Ljupčo and Baronio, Fabio",
year = "2021",
abstract = "The provided database of 260 ECG signals was collected from patients with out-of-hospital cardiac arrest while treated by the emergency medical services. Each ECG signal contains a 9 second waveform showing ventricular fibrillation, followed by 1 min of post-shock waveform. Patients’ ECGs are made available in multiple formats. All ECGs recorded during the prehospital treatment are provided in PFD files, after being anonymized, printed in paper, and scanned. For each ECG, the dataset also includes the whole digitized waveform (9 s pre- and 1 min post-shock each) and numerous features in temporal and frequency domain extracted from the 9 s episode immediately prior to the first defibrillation shock. Based on the shock outcome, each ECG file has been annotated by three expert cardiologists, - using majority decision -, as successful (56 cases), unsuccessful (195 cases), or indeterminable (9 cases). The code for preprocessing, for feature extraction, and for limiting the investigation to different temporal intervals before the shock is also provided. These data could be reused to design algorithms to predict shock outcome based on ventricular fibrillation analysis, with the goal to optimize the defibrillation strategy (immediate defibrillation versus cardiopulmonary resuscitation and/or drug administration) for enhancing resuscitation. © 2020",
journal = "Data in Brief",
title = "ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients",
volume = "34",
pages = "106635",
doi = "10.1016/j.dib.2020.106635"
}
Benini, S., Ivanović, M. D., Savardi, M., Kršić, J., Hadžievski, L.,& Baronio, F.. (2021). ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients. in Data in Brief, 34, 106635.
https://doi.org/10.1016/j.dib.2020.106635
Benini S, Ivanović MD, Savardi M, Kršić J, Hadžievski L, Baronio F. ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients. in Data in Brief. 2021;34:106635.
doi:10.1016/j.dib.2020.106635 .
Benini, Sergio, Ivanović, Marija D., Savardi, Mattia, Kršić, Jelena, Hadžievski, Ljupčo, Baronio, Fabio, "ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients" in Data in Brief, 34 (2021):106635,
https://doi.org/10.1016/j.dib.2020.106635 . .
1
1
1
1

Properties of different types of dry electrodes for wearable smart monitoring devices

Popović Maneski, Lana; Ivanović, Marija D.; Atanasoski, Vladimir; Miletić, Marjan; Zdolšek, Sanja; Bojović, Boško; Hadžievski, Ljupčo

(2020)

TY  - JOUR
AU  - Popović Maneski, Lana
AU  - Ivanović, Marija D.
AU  - Atanasoski, Vladimir
AU  - Miletić, Marjan
AU  - Zdolšek, Sanja
AU  - Bojović, Boško
AU  - Hadžievski, Ljupčo
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8940
AB  - Wearable smart monitors (WSMs) applied for the estimation of electrophysiological signals are of utmost interest for a non-stressed life. WSM which records heart muscle activities could signalize timely a life-threatening event. The heart muscle activities are typically recorded across the heart at the surface of the body; hence, a WSM monitor requires high-quality surface electrodes. The electrodes used in the clinical settings [i.e. silver/silver chloride (Ag/AgCl) with the gel] are not practical for the daily out of clinic usage. A practical WSM requires the application of a dry electrode with stable and reproducible electrical characteristics. We compared the characteristics of six types of dry electrodes and one gelled electrode during short-term recordings sessions (≈30 s) in real-life conditions: Orbital, monolithic polymer plated with Ag/AgCl, and five rectangular shaped 10 × 6 × 2 mm electrodes (Orbital, Ag electrode, Ag/AgCl electrode, gold electrode and stainless-steel AISI304). The results of a well-controlled analysis which considered motion artifacts, line noise and junction potentials suggest that among the dry electrodes Ag/AgCl performs the best. The Ag/AgCl electrode is in average three times better compared with the stainless-steel electrode often used in WSMs.
T2  - Biomedical Engineering / Biomedizinische Technik
T1  - Properties of different types of dry electrodes for wearable smart monitoring devices
VL  - 65
IS  - 4
SP  - 405
EP  - 415
DO  - 10.1515/bmt-2019-0167
ER  - 
@article{
author = "Popović Maneski, Lana and Ivanović, Marija D. and Atanasoski, Vladimir and Miletić, Marjan and Zdolšek, Sanja and Bojović, Boško and Hadžievski, Ljupčo",
year = "2020",
abstract = "Wearable smart monitors (WSMs) applied for the estimation of electrophysiological signals are of utmost interest for a non-stressed life. WSM which records heart muscle activities could signalize timely a life-threatening event. The heart muscle activities are typically recorded across the heart at the surface of the body; hence, a WSM monitor requires high-quality surface electrodes. The electrodes used in the clinical settings [i.e. silver/silver chloride (Ag/AgCl) with the gel] are not practical for the daily out of clinic usage. A practical WSM requires the application of a dry electrode with stable and reproducible electrical characteristics. We compared the characteristics of six types of dry electrodes and one gelled electrode during short-term recordings sessions (≈30 s) in real-life conditions: Orbital, monolithic polymer plated with Ag/AgCl, and five rectangular shaped 10 × 6 × 2 mm electrodes (Orbital, Ag electrode, Ag/AgCl electrode, gold electrode and stainless-steel AISI304). The results of a well-controlled analysis which considered motion artifacts, line noise and junction potentials suggest that among the dry electrodes Ag/AgCl performs the best. The Ag/AgCl electrode is in average three times better compared with the stainless-steel electrode often used in WSMs.",
journal = "Biomedical Engineering / Biomedizinische Technik",
title = "Properties of different types of dry electrodes for wearable smart monitoring devices",
volume = "65",
number = "4",
pages = "405-415",
doi = "10.1515/bmt-2019-0167"
}
Popović Maneski, L., Ivanović, M. D., Atanasoski, V., Miletić, M., Zdolšek, S., Bojović, B.,& Hadžievski, L.. (2020). Properties of different types of dry electrodes for wearable smart monitoring devices. in Biomedical Engineering / Biomedizinische Technik, 65(4), 405-415.
https://doi.org/10.1515/bmt-2019-0167
Popović Maneski L, Ivanović MD, Atanasoski V, Miletić M, Zdolšek S, Bojović B, Hadžievski L. Properties of different types of dry electrodes for wearable smart monitoring devices. in Biomedical Engineering / Biomedizinische Technik. 2020;65(4):405-415.
doi:10.1515/bmt-2019-0167 .
Popović Maneski, Lana, Ivanović, Marija D., Atanasoski, Vladimir, Miletić, Marjan, Zdolšek, Sanja, Bojović, Boško, Hadžievski, Ljupčo, "Properties of different types of dry electrodes for wearable smart monitoring devices" in Biomedical Engineering / Biomedizinische Technik, 65, no. 4 (2020):405-415,
https://doi.org/10.1515/bmt-2019-0167 . .
8
5

Deep learning-based classification of high intensity light patterns in photorefractive crystals

Ivanović, Marija D.; Mančić, Ana; Hermann-Avigliano, Carla; Hadžievski, Ljupčo; Maluckov, Aleksandra

(2020)

TY  - JOUR
AU  - Ivanović, Marija D.
AU  - Mančić, Ana
AU  - Hermann-Avigliano, Carla
AU  - Hadžievski, Ljupčo
AU  - Maluckov, Aleksandra
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8837
AB  - In this paper, we establish a new scheme for identification and classification of high intensity events generated by the propagation of light through a photorefractive SBN crystal. Among these events, which are the inevitable consequence of the development of modulation instability, are speckling and soliton-like patterns. The usual classifiers, developed on statistical measures, such as the significant intensity, often provide only a partial characterization of these events. Here, we try to overcome this deficiency by implementing the convolution neural network method to relate experimental data of light intensity distribution and corresponding numerical outputs with different high intensity regimes. The train and test sets are formed of experimentally obtained intensity profiles at the crystal output facet and corresponding numerical profiles. The accuracy of detection of speckles reaches maximum value of 100%, while the accuracy of solitons and caustic detection is above 97%. These performances are promising for the creation of neural network based routines for prediction of extreme events in wave media. © 2020 IOP Publishing Ltd.
T2  - Journal of Optics
T1  - Deep learning-based classification of high intensity light patterns in photorefractive crystals
VL  - 22
IS  - 3
SP  - 035504
DO  - 10.1088/2040-8986/ab70f0
ER  - 
@article{
author = "Ivanović, Marija D. and Mančić, Ana and Hermann-Avigliano, Carla and Hadžievski, Ljupčo and Maluckov, Aleksandra",
year = "2020",
abstract = "In this paper, we establish a new scheme for identification and classification of high intensity events generated by the propagation of light through a photorefractive SBN crystal. Among these events, which are the inevitable consequence of the development of modulation instability, are speckling and soliton-like patterns. The usual classifiers, developed on statistical measures, such as the significant intensity, often provide only a partial characterization of these events. Here, we try to overcome this deficiency by implementing the convolution neural network method to relate experimental data of light intensity distribution and corresponding numerical outputs with different high intensity regimes. The train and test sets are formed of experimentally obtained intensity profiles at the crystal output facet and corresponding numerical profiles. The accuracy of detection of speckles reaches maximum value of 100%, while the accuracy of solitons and caustic detection is above 97%. These performances are promising for the creation of neural network based routines for prediction of extreme events in wave media. © 2020 IOP Publishing Ltd.",
journal = "Journal of Optics",
title = "Deep learning-based classification of high intensity light patterns in photorefractive crystals",
volume = "22",
number = "3",
pages = "035504",
doi = "10.1088/2040-8986/ab70f0"
}
Ivanović, M. D., Mančić, A., Hermann-Avigliano, C., Hadžievski, L.,& Maluckov, A.. (2020). Deep learning-based classification of high intensity light patterns in photorefractive crystals. in Journal of Optics, 22(3), 035504.
https://doi.org/10.1088/2040-8986/ab70f0
Ivanović MD, Mančić A, Hermann-Avigliano C, Hadžievski L, Maluckov A. Deep learning-based classification of high intensity light patterns in photorefractive crystals. in Journal of Optics. 2020;22(3):035504.
doi:10.1088/2040-8986/ab70f0 .
Ivanović, Marija D., Mančić, Ana, Hermann-Avigliano, Carla, Hadžievski, Ljupčo, Maluckov, Aleksandra, "Deep learning-based classification of high intensity light patterns in photorefractive crystals" in Journal of Optics, 22, no. 3 (2020):035504,
https://doi.org/10.1088/2040-8986/ab70f0 . .
2
1
1

Cardially - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients

Benini, Sergio; Ivanović, Marija D.; Savardi, Mattia; Kršić, Jelena; Hadžievski, Ljupčo; Baronio, Fabio

(2020)

TY  - DATA
AU  - Benini, Sergio
AU  - Ivanović, Marija D.
AU  - Savardi, Mattia
AU  - Kršić, Jelena
AU  - Hadžievski, Ljupčo
AU  - Baronio, Fabio
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9549
AB  - The provided database of 260 ECG signals was collected from patients with out-of-hospital cardiac arrest while treated by the emergency medical services. Each ECG signal contains a 9 second waveform showing ventricular fibrillation, followed by 1 minute of post-shock waveform. Patients’ ECGs are made available in multiple formats. All ECGs recorded during the prehospital treatment are provided in PFD files, after being anonymized, printed in paper, and scanned. For each ECG, the dataset also includes the whole digitized waveform (9 s pre- and 1 min post-shock each) and numerous features in temporal and frequency domain extracted from the 9 s episode immediately prior to the first defibrillation shock. Based on the shock outcome, each ECG file has been annotated by three expert cardiologists, - using majority decision -, as successful (56 cases), unsuccessful (195 cases), or indeterminable (9 cases). The code for preprocessing, for feature extraction, and for limiting the investigation to different temporal intervals before the shock is also provided. These data could be reused to design algorithms to predict shock outcome based on ventricular fibrillation analysis, with the goal to optimize the defibrillation strategy (immediate defibrillation versus cardiopulmonary resuscitation and/or drug administration) for enhancing resuscitation.
T2  - Mendeley Data
T1  - Cardially - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients
DO  - 10.17632/wpr5nzyn2z.1
ER  - 
@misc{
author = "Benini, Sergio and Ivanović, Marija D. and Savardi, Mattia and Kršić, Jelena and Hadžievski, Ljupčo and Baronio, Fabio",
year = "2020",
abstract = "The provided database of 260 ECG signals was collected from patients with out-of-hospital cardiac arrest while treated by the emergency medical services. Each ECG signal contains a 9 second waveform showing ventricular fibrillation, followed by 1 minute of post-shock waveform. Patients’ ECGs are made available in multiple formats. All ECGs recorded during the prehospital treatment are provided in PFD files, after being anonymized, printed in paper, and scanned. For each ECG, the dataset also includes the whole digitized waveform (9 s pre- and 1 min post-shock each) and numerous features in temporal and frequency domain extracted from the 9 s episode immediately prior to the first defibrillation shock. Based on the shock outcome, each ECG file has been annotated by three expert cardiologists, - using majority decision -, as successful (56 cases), unsuccessful (195 cases), or indeterminable (9 cases). The code for preprocessing, for feature extraction, and for limiting the investigation to different temporal intervals before the shock is also provided. These data could be reused to design algorithms to predict shock outcome based on ventricular fibrillation analysis, with the goal to optimize the defibrillation strategy (immediate defibrillation versus cardiopulmonary resuscitation and/or drug administration) for enhancing resuscitation.",
journal = "Mendeley Data",
title = "Cardially - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients",
doi = "10.17632/wpr5nzyn2z.1"
}
Benini, S., Ivanović, M. D., Savardi, M., Kršić, J., Hadžievski, L.,& Baronio, F.. (2020). Cardially - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients. in Mendeley Data.
https://doi.org/10.17632/wpr5nzyn2z.1
Benini S, Ivanović MD, Savardi M, Kršić J, Hadžievski L, Baronio F. Cardially - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients. in Mendeley Data. 2020;.
doi:10.17632/wpr5nzyn2z.1 .
Benini, Sergio, Ivanović, Marija D., Savardi, Mattia, Kršić, Jelena, Hadžievski, Ljupčo, Baronio, Fabio, "Cardially - ECG waveform dataset for predicting defibrillation outcome in out-of-hospital cardiac arrested patients" in Mendeley Data (2020),
https://doi.org/10.17632/wpr5nzyn2z.1 . .

Predicting defibrillation success in out-of-hospital cardiac arrested patients: Moving beyond feature design

Ivanović, Marija D.; Hannink, Julius; Ring, Matthias; Baronio, Fabio; Vukčević, Vladan; Hadžievski, Ljupčo; Eskofier, Bjoern

(2020)

TY  - JOUR
AU  - Ivanović, Marija D.
AU  - Hannink, Julius
AU  - Ring, Matthias
AU  - Baronio, Fabio
AU  - Vukčević, Vladan
AU  - Hadžievski, Ljupčo
AU  - Eskofier, Bjoern
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9678
AB  - Optimizing timing of defibrillation by evaluating the likelihood of a successful outcome could significantly enhance resuscitation. Previous studies employed conventional machine learning approaches and hand-crafted features to address this issue, but none have achieved superior performance to be widely accepted. This study proposes a novel approach in which predictive features are automatically learned.MethodsA raw 4s VF episode immediately prior to first defibrillation shock was feed to a 3-stage CNN feature extractor. Each stage was composed of 4 components: convolution, rectified linear unit activation, dropout and max-pooling. At the end of feature extractor, the feature map was flattened and connected to a fully connected multi-layer perceptron for classification. For model evaluation, a 10 fold cross-validation was employed. To balance classes, SMOTE oversampling method has been applied to minority class.ResultsThe obtained results show that the proposed model is highly accurate in predicting defibrillation outcome (Acc = 93.6 %). Since recommendations on classifiers suggest at least 50 % specificity and 95 % sensitivity as safe and useful predictors for defibrillation decision, the reported sensitivity of 98.8 % and specificity of 88.2 %, with the analysis speed of 3 ms/input signal, indicate that the proposed model possesses a good prospective to be implemented in automated external defibrillators.ConclusionsThe learned features demonstrate superiority over hand-crafted ones when performed on the same dataset. This approach benefits from being fully automatic by fusing feature extraction, selection and classification into a single learning model. It provides a superior strategy that can be used as a tool to guide treatment of OHCA patients in bringing optimal decision of precedence treatment. Furthermore, for encouraging replicability, the dataset has been made publicly available to the research community.
T2  - Artificial Intelligence in Medicine
T1  - Predicting defibrillation success in out-of-hospital cardiac arrested patients: Moving beyond feature design
VL  - 110
SP  - 101963
DO  - 10.1016/j.artmed.2020.101963
ER  - 
@article{
author = "Ivanović, Marija D. and Hannink, Julius and Ring, Matthias and Baronio, Fabio and Vukčević, Vladan and Hadžievski, Ljupčo and Eskofier, Bjoern",
year = "2020",
abstract = "Optimizing timing of defibrillation by evaluating the likelihood of a successful outcome could significantly enhance resuscitation. Previous studies employed conventional machine learning approaches and hand-crafted features to address this issue, but none have achieved superior performance to be widely accepted. This study proposes a novel approach in which predictive features are automatically learned.MethodsA raw 4s VF episode immediately prior to first defibrillation shock was feed to a 3-stage CNN feature extractor. Each stage was composed of 4 components: convolution, rectified linear unit activation, dropout and max-pooling. At the end of feature extractor, the feature map was flattened and connected to a fully connected multi-layer perceptron for classification. For model evaluation, a 10 fold cross-validation was employed. To balance classes, SMOTE oversampling method has been applied to minority class.ResultsThe obtained results show that the proposed model is highly accurate in predicting defibrillation outcome (Acc = 93.6 %). Since recommendations on classifiers suggest at least 50 % specificity and 95 % sensitivity as safe and useful predictors for defibrillation decision, the reported sensitivity of 98.8 % and specificity of 88.2 %, with the analysis speed of 3 ms/input signal, indicate that the proposed model possesses a good prospective to be implemented in automated external defibrillators.ConclusionsThe learned features demonstrate superiority over hand-crafted ones when performed on the same dataset. This approach benefits from being fully automatic by fusing feature extraction, selection and classification into a single learning model. It provides a superior strategy that can be used as a tool to guide treatment of OHCA patients in bringing optimal decision of precedence treatment. Furthermore, for encouraging replicability, the dataset has been made publicly available to the research community.",
journal = "Artificial Intelligence in Medicine",
title = "Predicting defibrillation success in out-of-hospital cardiac arrested patients: Moving beyond feature design",
volume = "110",
pages = "101963",
doi = "10.1016/j.artmed.2020.101963"
}
Ivanović, M. D., Hannink, J., Ring, M., Baronio, F., Vukčević, V., Hadžievski, L.,& Eskofier, B.. (2020). Predicting defibrillation success in out-of-hospital cardiac arrested patients: Moving beyond feature design. in Artificial Intelligence in Medicine, 110, 101963.
https://doi.org/10.1016/j.artmed.2020.101963
Ivanović MD, Hannink J, Ring M, Baronio F, Vukčević V, Hadžievski L, Eskofier B. Predicting defibrillation success in out-of-hospital cardiac arrested patients: Moving beyond feature design. in Artificial Intelligence in Medicine. 2020;110:101963.
doi:10.1016/j.artmed.2020.101963 .
Ivanović, Marija D., Hannink, Julius, Ring, Matthias, Baronio, Fabio, Vukčević, Vladan, Hadžievski, Ljupčo, Eskofier, Bjoern, "Predicting defibrillation success in out-of-hospital cardiac arrested patients: Moving beyond feature design" in Artificial Intelligence in Medicine, 110 (2020):101963,
https://doi.org/10.1016/j.artmed.2020.101963 . .
11
3
9

Long-period grating sensors for the measurement of apexcardiogram

Miletić, M.; Kršić, Jelena; Atanasoski, Vladimir; Ivanović, Marija; Bojović, Boško

(Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade, 2019)

TY  - CONF
AU  - Miletić, M.
AU  - Kršić, Jelena
AU  - Atanasoski, Vladimir
AU  - Ivanović, Marija
AU  - Bojović, Boško
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11880
AB  - Apexcardiogram (ACG) represents record of low-frequency vibrations of the precordium caused by heart contractions. The information obtained from ACG is mostly related to left ventricular contractions. The most common position for its measurement is in parasternal area of chest wall, above the apex of the heart. The measurement of ACG can provide date significant in timing of systolic events of the cardiac cycle. Particulary, ACG is used as aid in timing of the opening snap of the cardiac valves, for the identification of the exact timing of the third (S3) and fourth heart sounds (S4) and for early diagnosis of the mitral valve stenosis or regurgitation [1]. The frequently used methods for non-invasively recording of ACG include using of electro manometer sensor, piezoelectric microphone sensor and crystal-microphone sensor for measuring mechanical displacements of chest wall [2]. The disadvantages of these sensors are potential noise caused by electrical interference and technical difficulties in their application on body surface. The goal of this study is to evaluate possibility of using long-period grating (LPG) sensor as potential non-invasive method for ACG recording. The advantages of utilizing LPG sensors are their low cost, utilization simplicity, and insensitivity to electrical interference. The study protocol includes measurements on group of healthy volunteers utilizing a single LPG sensor. LPG sensor is positioned in paternal area of chest wall, above the apex of the heart and fixed with the elastic bandage. It is used as a sensor of mechanical pulsation on the body surface. All healthy volunteers are asked to hold their breath in mid-expiration phase for at least 10 seconds in order to avoid the interference of the ACG with a breathing signal. Our results show that we are able to record signals with morphology of normal ACG repeatably on each healthy volunteer, and with the significant signal-to-noise ratio. Hence, we can conclude that LPG sensors can be used for recording ACG by measuring mechanical low-frequency vibrations of the precordium on the body surface above the apex of the heart.
PB  - Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade
C3  - PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts
T1  - Long-period grating sensors for the measurement of apexcardiogram
SP  - 131
EP  - 131
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11880
ER  - 
@conference{
author = "Miletić, M. and Kršić, Jelena and Atanasoski, Vladimir and Ivanović, Marija and Bojović, Boško",
year = "2019",
abstract = "Apexcardiogram (ACG) represents record of low-frequency vibrations of the precordium caused by heart contractions. The information obtained from ACG is mostly related to left ventricular contractions. The most common position for its measurement is in parasternal area of chest wall, above the apex of the heart. The measurement of ACG can provide date significant in timing of systolic events of the cardiac cycle. Particulary, ACG is used as aid in timing of the opening snap of the cardiac valves, for the identification of the exact timing of the third (S3) and fourth heart sounds (S4) and for early diagnosis of the mitral valve stenosis or regurgitation [1]. The frequently used methods for non-invasively recording of ACG include using of electro manometer sensor, piezoelectric microphone sensor and crystal-microphone sensor for measuring mechanical displacements of chest wall [2]. The disadvantages of these sensors are potential noise caused by electrical interference and technical difficulties in their application on body surface. The goal of this study is to evaluate possibility of using long-period grating (LPG) sensor as potential non-invasive method for ACG recording. The advantages of utilizing LPG sensors are their low cost, utilization simplicity, and insensitivity to electrical interference. The study protocol includes measurements on group of healthy volunteers utilizing a single LPG sensor. LPG sensor is positioned in paternal area of chest wall, above the apex of the heart and fixed with the elastic bandage. It is used as a sensor of mechanical pulsation on the body surface. All healthy volunteers are asked to hold their breath in mid-expiration phase for at least 10 seconds in order to avoid the interference of the ACG with a breathing signal. Our results show that we are able to record signals with morphology of normal ACG repeatably on each healthy volunteer, and with the significant signal-to-noise ratio. Hence, we can conclude that LPG sensors can be used for recording ACG by measuring mechanical low-frequency vibrations of the precordium on the body surface above the apex of the heart.",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade",
journal = "PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts",
title = "Long-period grating sensors for the measurement of apexcardiogram",
pages = "131-131",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11880"
}
Miletić, M., Kršić, J., Atanasoski, V., Ivanović, M.,& Bojović, B.. (2019). Long-period grating sensors for the measurement of apexcardiogram. in PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts
Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade., 131-131.
https://hdl.handle.net/21.15107/rcub_vinar_11880
Miletić M, Kršić J, Atanasoski V, Ivanović M, Bojović B. Long-period grating sensors for the measurement of apexcardiogram. in PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts. 2019;:131-131.
https://hdl.handle.net/21.15107/rcub_vinar_11880 .
Miletić, M., Kršić, Jelena, Atanasoski, Vladimir, Ivanović, Marija, Bojović, Boško, "Long-period grating sensors for the measurement of apexcardiogram" in PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts (2019):131-131,
https://hdl.handle.net/21.15107/rcub_vinar_11880 .

Deep Learning Approach for Highly Specific Atrial Fibrillation and Flutter Detection based on RR Intervals

Ivanović, Marija D.; Atanasoski, Vladimir; Shvilkin, Alexei; Hadžievski, Ljupčo; Maluckov, Aleksandra

(IEEE, 2019)

TY  - CONF
AU  - Ivanović, Marija D.
AU  - Atanasoski, Vladimir
AU  - Shvilkin, Alexei
AU  - Hadžievski, Ljupčo
AU  - Maluckov, Aleksandra
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8805
AB  - Atrial fibrillation (AF) and atrial flutter (AFL) represent atrial arrhythmias closely related to increasing risk for embolic stroke, and therefore being in the focus of cardiologists. While the reported methods for AF detection exhibit high performances, little attention has been given to distinguishing these two arrhythmias. In this study, we propose a deep neural network architecture, which combines convolutional and recurrent neural networks, for extracting features from sequence of RR intervals. The learned features were used to classify a long term ECG signals as AF, AFL or sinus rhythm (SR). A 10-fold cross-validation strategy was used for choosing an architecture design and tuning model hyperparameters. Accuracy of 88.28 %, with the sensitivities of 93.83%, 83.60% and 83.83% for SR, AF and AFL, respectively, was achieved. After choosing optimal network structure, the model was trained on the entire training set and finally evaluated on the blindfold test set which resulted in 89.67% accuracy, and 97.20%, 94.20%, and 77.78% sensitivity for SR, AF and AFL, respectively. Promising performances of the proposed model encourage continuing development of highly specific AF and AFL detection procedure based on deep learning. Distinction between these two arrhythmias can make therapy more efficient and decrease the recovery time to normal heart rhythm. © 2019 IEEE.
PB  - IEEE
C3  - Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin)
T1  - Deep Learning Approach for Highly Specific Atrial Fibrillation and Flutter Detection based on RR Intervals
SP  - 1780
EP  - 1783
DO  - 10.1109/EMBC.2019.8856806
ER  - 
@conference{
author = "Ivanović, Marija D. and Atanasoski, Vladimir and Shvilkin, Alexei and Hadžievski, Ljupčo and Maluckov, Aleksandra",
year = "2019",
abstract = "Atrial fibrillation (AF) and atrial flutter (AFL) represent atrial arrhythmias closely related to increasing risk for embolic stroke, and therefore being in the focus of cardiologists. While the reported methods for AF detection exhibit high performances, little attention has been given to distinguishing these two arrhythmias. In this study, we propose a deep neural network architecture, which combines convolutional and recurrent neural networks, for extracting features from sequence of RR intervals. The learned features were used to classify a long term ECG signals as AF, AFL or sinus rhythm (SR). A 10-fold cross-validation strategy was used for choosing an architecture design and tuning model hyperparameters. Accuracy of 88.28 %, with the sensitivities of 93.83%, 83.60% and 83.83% for SR, AF and AFL, respectively, was achieved. After choosing optimal network structure, the model was trained on the entire training set and finally evaluated on the blindfold test set which resulted in 89.67% accuracy, and 97.20%, 94.20%, and 77.78% sensitivity for SR, AF and AFL, respectively. Promising performances of the proposed model encourage continuing development of highly specific AF and AFL detection procedure based on deep learning. Distinction between these two arrhythmias can make therapy more efficient and decrease the recovery time to normal heart rhythm. © 2019 IEEE.",
publisher = "IEEE",
journal = "Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin)",
title = "Deep Learning Approach for Highly Specific Atrial Fibrillation and Flutter Detection based on RR Intervals",
pages = "1780-1783",
doi = "10.1109/EMBC.2019.8856806"
}
Ivanović, M. D., Atanasoski, V., Shvilkin, A., Hadžievski, L.,& Maluckov, A.. (2019). Deep Learning Approach for Highly Specific Atrial Fibrillation and Flutter Detection based on RR Intervals. in Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin)
IEEE., 1780-1783.
https://doi.org/10.1109/EMBC.2019.8856806
Ivanović MD, Atanasoski V, Shvilkin A, Hadžievski L, Maluckov A. Deep Learning Approach for Highly Specific Atrial Fibrillation and Flutter Detection based on RR Intervals. in Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin). 2019;:1780-1783.
doi:10.1109/EMBC.2019.8856806 .
Ivanović, Marija D., Atanasoski, Vladimir, Shvilkin, Alexei, Hadžievski, Ljupčo, Maluckov, Aleksandra, "Deep Learning Approach for Highly Specific Atrial Fibrillation and Flutter Detection based on RR Intervals" in Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin) (2019):1780-1783,
https://doi.org/10.1109/EMBC.2019.8856806 . .
28
24

Optical fiber grating sensors for the measurement of superficial temporal artery pulsations

Kršić, Jelena; Miletić, Marjan; Atanasoski, Vladimir; Hadžievski, Ljupčo; Ivanović, Marija

(Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade, 2019)

TY  - CONF
AU  - Kršić, Jelena
AU  - Miletić, Marjan
AU  - Atanasoski, Vladimir
AU  - Hadžievski, Ljupčo
AU  - Ivanović, Marija
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11892
AB  - The measurement of arterial blood pressure waveform can provide important data about arterial health, from which general cardiovascular health can be estimated. The arterial blood pressure wave is created by heart contraction which then propagates along the arterial tree. Along its path, the pressure wave causes the distention of arterial walls which consequently can be palpated and measured as micro-movements on the surface of the body. The most frequently used places on the body for recording of the blood pressure waveform are in the fingers and above the radial artery on the wrist. However, since waveforms recorded on the periphery of the body alter from central ones, there is the necessity for non-invasive measurements closer to the ascending aorta [1]. The purpose of this study was to evaluate the possibility of utilizing the superficial temporal artery (STA) as a potential candidate for obtaining arterial waveform recorded non-invasively by fiber grating sensors. The STA is a terminal branch of the external carotid artery and it represents the major artery of the head. The sites over the main branch (near the ear) and the frontal branch of the STA (near ocular area) are easily accessible ones with negligible amounts of fat and muscle tissues. Assessment tests were carried out by using fiber grating sensors (fiber Bragg grating (FBG) and long-period grating (LPG)) as sensors of the arterial distention movement. Here we were focused on the possibility to record the STA pulsations in healthy volunteers when the sensors were just placed on the skin over the STA and fixed with the tape or elastic bandage. Our results show that with this type of application, LPG technology outperformed FBG in a sense of sensitivity and signal to noise ratio. The reason possibly lies in the fact that cladding modes generated by an LPG are much more affected by arterial distention than back-propagating core modes of an FBG [2]. By using LPG sensor we were able to record STA pulsations in all volunteers.
PB  - Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade
C3  - PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts
T1  - Optical fiber grating sensors for the measurement of superficial temporal artery pulsations
SP  - 121
EP  - 121
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11892
ER  - 
@conference{
author = "Kršić, Jelena and Miletić, Marjan and Atanasoski, Vladimir and Hadžievski, Ljupčo and Ivanović, Marija",
year = "2019",
abstract = "The measurement of arterial blood pressure waveform can provide important data about arterial health, from which general cardiovascular health can be estimated. The arterial blood pressure wave is created by heart contraction which then propagates along the arterial tree. Along its path, the pressure wave causes the distention of arterial walls which consequently can be palpated and measured as micro-movements on the surface of the body. The most frequently used places on the body for recording of the blood pressure waveform are in the fingers and above the radial artery on the wrist. However, since waveforms recorded on the periphery of the body alter from central ones, there is the necessity for non-invasive measurements closer to the ascending aorta [1]. The purpose of this study was to evaluate the possibility of utilizing the superficial temporal artery (STA) as a potential candidate for obtaining arterial waveform recorded non-invasively by fiber grating sensors. The STA is a terminal branch of the external carotid artery and it represents the major artery of the head. The sites over the main branch (near the ear) and the frontal branch of the STA (near ocular area) are easily accessible ones with negligible amounts of fat and muscle tissues. Assessment tests were carried out by using fiber grating sensors (fiber Bragg grating (FBG) and long-period grating (LPG)) as sensors of the arterial distention movement. Here we were focused on the possibility to record the STA pulsations in healthy volunteers when the sensors were just placed on the skin over the STA and fixed with the tape or elastic bandage. Our results show that with this type of application, LPG technology outperformed FBG in a sense of sensitivity and signal to noise ratio. The reason possibly lies in the fact that cladding modes generated by an LPG are much more affected by arterial distention than back-propagating core modes of an FBG [2]. By using LPG sensor we were able to record STA pulsations in all volunteers.",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade",
journal = "PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts",
title = "Optical fiber grating sensors for the measurement of superficial temporal artery pulsations",
pages = "121-121",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11892"
}
Kršić, J., Miletić, M., Atanasoski, V., Hadžievski, L.,& Ivanović, M.. (2019). Optical fiber grating sensors for the measurement of superficial temporal artery pulsations. in PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts
Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade., 121-121.
https://hdl.handle.net/21.15107/rcub_vinar_11892
Kršić J, Miletić M, Atanasoski V, Hadžievski L, Ivanović M. Optical fiber grating sensors for the measurement of superficial temporal artery pulsations. in PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts. 2019;:121-121.
https://hdl.handle.net/21.15107/rcub_vinar_11892 .
Kršić, Jelena, Miletić, Marjan, Atanasoski, Vladimir, Hadžievski, Ljupčo, Ivanović, Marija, "Optical fiber grating sensors for the measurement of superficial temporal artery pulsations" in PHOTONICA2019 : 7th International School and Conference on Photonics & Machine Learning with Photonics Symposium : Book of abstracts (2019):121-121,
https://hdl.handle.net/21.15107/rcub_vinar_11892 .

Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device

Ivanović, Marija D.; Miletić, Marjan; Subotić, Ida; Boljević, Darko

(IEEE, 2019)

TY  - CONF
AU  - Ivanović, Marija D.
AU  - Miletić, Marjan
AU  - Subotić, Ida
AU  - Boljević, Darko
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8804
AB  - Acute myocardial infraction (AMI) is a leading cause of death in the developed countries. Survival of patients having acute coronary syndrome (ACS) dramatically depends on treatment delay. Hence, a technology that would enable ECG recording immediately after ACS symptom occurrence may significantly decrease AMI mortality. In this study we investigate the signal quality of reconstructed 12-lead ECGs by using 3-lead handheld device with dry electrode in realistic ambulatory conditions. For each subject enrolled in the study an individual transformation matrix was calculated during the calibration procedure, and used for 12-lead reconstruction whenever that subject sends a recording from a handheld device. To evaluate fidelity of 12-lead reconstructions, 3 performance metrics were defined. The results show that the reconstruction error is largest on QRS complex and smallest on ST segment for all 3 metrics. This indicates that the reconstruction of the ST segment, which carries the most important information for ischemia detection, is reconstructed with the highest quality. © 2019 IEEE.
PB  - IEEE
C3  - Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin)
T1  - Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device
SP  - 5481
EP  - 5487
DO  - 10.1109/EMBC.2019.8857251
ER  - 
@conference{
author = "Ivanović, Marija D. and Miletić, Marjan and Subotić, Ida and Boljević, Darko",
year = "2019",
abstract = "Acute myocardial infraction (AMI) is a leading cause of death in the developed countries. Survival of patients having acute coronary syndrome (ACS) dramatically depends on treatment delay. Hence, a technology that would enable ECG recording immediately after ACS symptom occurrence may significantly decrease AMI mortality. In this study we investigate the signal quality of reconstructed 12-lead ECGs by using 3-lead handheld device with dry electrode in realistic ambulatory conditions. For each subject enrolled in the study an individual transformation matrix was calculated during the calibration procedure, and used for 12-lead reconstruction whenever that subject sends a recording from a handheld device. To evaluate fidelity of 12-lead reconstructions, 3 performance metrics were defined. The results show that the reconstruction error is largest on QRS complex and smallest on ST segment for all 3 metrics. This indicates that the reconstruction of the ST segment, which carries the most important information for ischemia detection, is reconstructed with the highest quality. © 2019 IEEE.",
publisher = "IEEE",
journal = "Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin)",
title = "Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device",
pages = "5481-5487",
doi = "10.1109/EMBC.2019.8857251"
}
Ivanović, M. D., Miletić, M., Subotić, I.,& Boljević, D.. (2019). Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device. in Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin)
IEEE., 5481-5487.
https://doi.org/10.1109/EMBC.2019.8857251
Ivanović MD, Miletić M, Subotić I, Boljević D. Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device. in Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin). 2019;:5481-5487.
doi:10.1109/EMBC.2019.8857251 .
Ivanović, Marija D., Miletić, Marjan, Subotić, Ida, Boljević, Darko, "Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device" in Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (41; 2019; Berlin) (2019):5481-5487,
https://doi.org/10.1109/EMBC.2019.8857251 . .
3
3
3

Real-time chest-wall-motion tracking by a single optical fibre grating: a prospective method for ventilator triggering

Ivanović, Marija D.; Petrović, Jovana S.; Savić, Andrej; Gligorić, Goran; Miletić, Marjan; Vukčević, Miodrag; Bojović, Boško; Hadžievski, Ljupčo; Allsop, Thomas P.; Webb, David J.

(2018)

TY  - JOUR
AU  - Ivanović, Marija D.
AU  - Petrović, Jovana S.
AU  - Savić, Andrej
AU  - Gligorić, Goran
AU  - Miletić, Marjan
AU  - Vukčević, Miodrag
AU  - Bojović, Boško
AU  - Hadžievski, Ljupčo
AU  - Allsop, Thomas P.
AU  - Webb, David J.
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7637
AB  - Objective: The ventilators involved in non-invasive mechanical ventilation commonly provide ventilator support via a facemask. The interface of the mask with a patient promotes air leaks that cause errors in the feedback information provided by a pneumatic sensor and hence patient-ventilator asynchrony with multiple negative consequences. Our objective is to test the possibility of using chest-wall motion measured by an optical fibre-grating sensor as a more accurate non-invasive ventilator triggering mechanism. Approach: The basic premise of our approach is that the measurement accuracy can be improved by using a triggering signal that precedes pneumatic triggering in the neuro-ventilatory coupling sequence. We propose a technique that uses the measurement of chest-wall curvature by a long-period fibre-grating sensor. The sensor was applied externally to the rib-cage and interrogated in the lateral (edge) filtering scheme. The study was performed on 34 healthy volunteers. Statistical data analysis of the time lag between the fibregrating sensor and the reference pneumotachograph was preceded by the removal of the unwanted heartbeat signal by wavelet transform processing. Main results: The results show a consistent fibregrating signal advance with respect to the standard pneumatic signal by (230 +/- 100) ms in both the inspiratory and expiratory phases. We further show that heart activity removal yields a tremendous improvement in sensor accuracy by reducing it from 60 ml to 0.3 ml. Significance: The results indicate that the proposed measurement technique may lead to a more reliable triggering decision. Its imperviousness to air leaks, non-invasiveness, low-cost and ease of implementation offer good prospects for applications in both clinical and homecare ventilation.
T2  - Physiological Measurement
T1  - Real-time chest-wall-motion tracking by a single optical fibre grating: a prospective method for ventilator triggering
VL  - 39
IS  - 4
SP  - 045009
DO  - 10.1088/1361-6579/aab7ac
ER  - 
@article{
author = "Ivanović, Marija D. and Petrović, Jovana S. and Savić, Andrej and Gligorić, Goran and Miletić, Marjan and Vukčević, Miodrag and Bojović, Boško and Hadžievski, Ljupčo and Allsop, Thomas P. and Webb, David J.",
year = "2018",
abstract = "Objective: The ventilators involved in non-invasive mechanical ventilation commonly provide ventilator support via a facemask. The interface of the mask with a patient promotes air leaks that cause errors in the feedback information provided by a pneumatic sensor and hence patient-ventilator asynchrony with multiple negative consequences. Our objective is to test the possibility of using chest-wall motion measured by an optical fibre-grating sensor as a more accurate non-invasive ventilator triggering mechanism. Approach: The basic premise of our approach is that the measurement accuracy can be improved by using a triggering signal that precedes pneumatic triggering in the neuro-ventilatory coupling sequence. We propose a technique that uses the measurement of chest-wall curvature by a long-period fibre-grating sensor. The sensor was applied externally to the rib-cage and interrogated in the lateral (edge) filtering scheme. The study was performed on 34 healthy volunteers. Statistical data analysis of the time lag between the fibregrating sensor and the reference pneumotachograph was preceded by the removal of the unwanted heartbeat signal by wavelet transform processing. Main results: The results show a consistent fibregrating signal advance with respect to the standard pneumatic signal by (230 +/- 100) ms in both the inspiratory and expiratory phases. We further show that heart activity removal yields a tremendous improvement in sensor accuracy by reducing it from 60 ml to 0.3 ml. Significance: The results indicate that the proposed measurement technique may lead to a more reliable triggering decision. Its imperviousness to air leaks, non-invasiveness, low-cost and ease of implementation offer good prospects for applications in both clinical and homecare ventilation.",
journal = "Physiological Measurement",
title = "Real-time chest-wall-motion tracking by a single optical fibre grating: a prospective method for ventilator triggering",
volume = "39",
number = "4",
pages = "045009",
doi = "10.1088/1361-6579/aab7ac"
}
Ivanović, M. D., Petrović, J. S., Savić, A., Gligorić, G., Miletić, M., Vukčević, M., Bojović, B., Hadžievski, L., Allsop, T. P.,& Webb, D. J.. (2018). Real-time chest-wall-motion tracking by a single optical fibre grating: a prospective method for ventilator triggering. in Physiological Measurement, 39(4), 045009.
https://doi.org/10.1088/1361-6579/aab7ac
Ivanović MD, Petrović JS, Savić A, Gligorić G, Miletić M, Vukčević M, Bojović B, Hadžievski L, Allsop TP, Webb DJ. Real-time chest-wall-motion tracking by a single optical fibre grating: a prospective method for ventilator triggering. in Physiological Measurement. 2018;39(4):045009.
doi:10.1088/1361-6579/aab7ac .
Ivanović, Marija D., Petrović, Jovana S., Savić, Andrej, Gligorić, Goran, Miletić, Marjan, Vukčević, Miodrag, Bojović, Boško, Hadžievski, Ljupčo, Allsop, Thomas P., Webb, David J., "Real-time chest-wall-motion tracking by a single optical fibre grating: a prospective method for ventilator triggering" in Physiological Measurement, 39, no. 4 (2018):045009,
https://doi.org/10.1088/1361-6579/aab7ac . .
2
1
2

Unsupervised Classification of Premature Ventricular Contractions Based on RR Interval and Heartbeat Morphology

Atanasoski, Vladimir; Ivanović, Marija D.; Marinković, Miloš; Gligorić, Goran; Bojović, Boško; Shvilkin, Alexei V.; Petrović, Jovana S.

(IEEE, 2018)

TY  - CONF
AU  - Atanasoski, Vladimir
AU  - Ivanović, Marija D.
AU  - Marinković, Miloš
AU  - Gligorić, Goran
AU  - Bojović, Boško
AU  - Shvilkin, Alexei V.
AU  - Petrović, Jovana S.
PY  - 2018
UR  - https://ieeexplore.ieee.org/document/8586997/
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8050
AB  - Accurate automated detection of premature ventricular contractions from electrocardiogram requires a training set or expert intervention. We propose a fully automated unsupervised detection method. The algorithm first clusters morphologically similar heartbeats and then performs classification based on RR intervals and morphology. Tests on clinically recorded datasets show sensitivity of 94.7%, specificity of 99.6% and accuracy of 99.5%. © 2018 IEEE.
PB  - IEEE
C3  - 2018 14th Symposium on Neural Networks and Applications (NEUREL)
C3  - 14th Symposium on Neural Networks and Applications (NEUREL) (2018)
T1  - Unsupervised Classification of Premature Ventricular Contractions Based on RR Interval and Heartbeat Morphology
SP  - 1
EP  - 6
DO  - 10.1109/NEUREL.2018.8586997
ER  - 
@conference{
author = "Atanasoski, Vladimir and Ivanović, Marija D. and Marinković, Miloš and Gligorić, Goran and Bojović, Boško and Shvilkin, Alexei V. and Petrović, Jovana S.",
year = "2018",
abstract = "Accurate automated detection of premature ventricular contractions from electrocardiogram requires a training set or expert intervention. We propose a fully automated unsupervised detection method. The algorithm first clusters morphologically similar heartbeats and then performs classification based on RR intervals and morphology. Tests on clinically recorded datasets show sensitivity of 94.7%, specificity of 99.6% and accuracy of 99.5%. © 2018 IEEE.",
publisher = "IEEE",
journal = "2018 14th Symposium on Neural Networks and Applications (NEUREL), 14th Symposium on Neural Networks and Applications (NEUREL) (2018)",
title = "Unsupervised Classification of Premature Ventricular Contractions Based on RR Interval and Heartbeat Morphology",
pages = "1-6",
doi = "10.1109/NEUREL.2018.8586997"
}
Atanasoski, V., Ivanović, M. D., Marinković, M., Gligorić, G., Bojović, B., Shvilkin, A. V.,& Petrović, J. S.. (2018). Unsupervised Classification of Premature Ventricular Contractions Based on RR Interval and Heartbeat Morphology. in 2018 14th Symposium on Neural Networks and Applications (NEUREL)
IEEE., 1-6.
https://doi.org/10.1109/NEUREL.2018.8586997
Atanasoski V, Ivanović MD, Marinković M, Gligorić G, Bojović B, Shvilkin AV, Petrović JS. Unsupervised Classification of Premature Ventricular Contractions Based on RR Interval and Heartbeat Morphology. in 2018 14th Symposium on Neural Networks and Applications (NEUREL). 2018;:1-6.
doi:10.1109/NEUREL.2018.8586997 .
Atanasoski, Vladimir, Ivanović, Marija D., Marinković, Miloš, Gligorić, Goran, Bojović, Boško, Shvilkin, Alexei V., Petrović, Jovana S., "Unsupervised Classification of Premature Ventricular Contractions Based on RR Interval and Heartbeat Morphology" in 2018 14th Symposium on Neural Networks and Applications (NEUREL) (2018):1-6,
https://doi.org/10.1109/NEUREL.2018.8586997 . .
3
5
5

ECG derived feature combination versus single feature in predicting defibrillation success in out-of-hospital cardiac arrested patients

Ivanović, Marija D.; Ring, Matthias; Baronio, Fabio; Calza, Stefano; Vukčević, Vladan; Hadžievski, Ljupčo; Maluckov, Aleksandra; Eskofier, Bjoern Michael

(2018)

TY  - JOUR
AU  - Ivanović, Marija D.
AU  - Ring, Matthias
AU  - Baronio, Fabio
AU  - Calza, Stefano
AU  - Vukčević, Vladan
AU  - Hadžievski, Ljupčo
AU  - Maluckov, Aleksandra
AU  - Eskofier, Bjoern Michael
PY  - 2018
UR  - http://stacks.iop.org/2057-1976/5/i=1/a=015012?key=crossref.179380a6d1fbac3633b726787a95feb5
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8095
AB  - Objective: Algorithms to predict shock outcome based on ventricular fibrillation (VF) waveform features are potentially useful tool to optimize defibrillation strategy (immediate defibrillation versus cardiopulmonary resuscitation). Researchers have investigated numerous predictive features and classification methods using single VF feature and/or their combinations, however reported predictabilities are not consistent. The purpose of this study was to validate whether combining VF features can enhance the prediction accuracy in comparison to single feature. Approach: The analysis was performed in 3 stages: feature extraction, preprocessing and feature selection and classification. Twenty eight predictive features were calculated on 4s episode of the pre-shock VF signal. The preprocessing included instances normalization and oversampling. Seven machine learning algorithms were employed for selecting the best performin single feature and combination of features using wrapper method: Logistic Regression (LR), Naïve-Bayes (NB), Decision tree (C4.5), AdaBoost.M1 (AB), Support Vector Machine (SVM), Nearest Neighbour (NN) and Random Forest (RF). Evaluation of the algorithms was performed by nested 10 fold cross-validation procedure. Main results: A total of 251 unbalanced first shocks (195 unsuccessful and 56 successful) were oversampled to 195 instances in each class. Performance metric based on average accuracy of feature combination has shown that LR and NB exhibit no improvement, C4.5 and AB an improvement not greater than 1% and SVM, NN and RF an improvement greater than 5% in predicting defibrillation outcome in comparison to the best single feature. Significance: By performing wrapper method to select best performing feature combination the non-linear machine learning strategies (SVM, NN, RF) can improve defibrillation prediction performance. © 2018 IOP Publishing Ltd.
T2  - Biomedical Physics and Engineering Express
T1  - ECG derived feature combination versus single feature in predicting defibrillation success in out-of-hospital cardiac arrested patients
VL  - 5
IS  - 1
SP  - 015012
DO  - 10.1088/2057-1976/aaebec
ER  - 
@article{
author = "Ivanović, Marija D. and Ring, Matthias and Baronio, Fabio and Calza, Stefano and Vukčević, Vladan and Hadžievski, Ljupčo and Maluckov, Aleksandra and Eskofier, Bjoern Michael",
year = "2018",
abstract = "Objective: Algorithms to predict shock outcome based on ventricular fibrillation (VF) waveform features are potentially useful tool to optimize defibrillation strategy (immediate defibrillation versus cardiopulmonary resuscitation). Researchers have investigated numerous predictive features and classification methods using single VF feature and/or their combinations, however reported predictabilities are not consistent. The purpose of this study was to validate whether combining VF features can enhance the prediction accuracy in comparison to single feature. Approach: The analysis was performed in 3 stages: feature extraction, preprocessing and feature selection and classification. Twenty eight predictive features were calculated on 4s episode of the pre-shock VF signal. The preprocessing included instances normalization and oversampling. Seven machine learning algorithms were employed for selecting the best performin single feature and combination of features using wrapper method: Logistic Regression (LR), Naïve-Bayes (NB), Decision tree (C4.5), AdaBoost.M1 (AB), Support Vector Machine (SVM), Nearest Neighbour (NN) and Random Forest (RF). Evaluation of the algorithms was performed by nested 10 fold cross-validation procedure. Main results: A total of 251 unbalanced first shocks (195 unsuccessful and 56 successful) were oversampled to 195 instances in each class. Performance metric based on average accuracy of feature combination has shown that LR and NB exhibit no improvement, C4.5 and AB an improvement not greater than 1% and SVM, NN and RF an improvement greater than 5% in predicting defibrillation outcome in comparison to the best single feature. Significance: By performing wrapper method to select best performing feature combination the non-linear machine learning strategies (SVM, NN, RF) can improve defibrillation prediction performance. © 2018 IOP Publishing Ltd.",
journal = "Biomedical Physics and Engineering Express",
title = "ECG derived feature combination versus single feature in predicting defibrillation success in out-of-hospital cardiac arrested patients",
volume = "5",
number = "1",
pages = "015012",
doi = "10.1088/2057-1976/aaebec"
}
Ivanović, M. D., Ring, M., Baronio, F., Calza, S., Vukčević, V., Hadžievski, L., Maluckov, A.,& Eskofier, B. M.. (2018). ECG derived feature combination versus single feature in predicting defibrillation success in out-of-hospital cardiac arrested patients. in Biomedical Physics and Engineering Express, 5(1), 015012.
https://doi.org/10.1088/2057-1976/aaebec
Ivanović MD, Ring M, Baronio F, Calza S, Vukčević V, Hadžievski L, Maluckov A, Eskofier BM. ECG derived feature combination versus single feature in predicting defibrillation success in out-of-hospital cardiac arrested patients. in Biomedical Physics and Engineering Express. 2018;5(1):015012.
doi:10.1088/2057-1976/aaebec .
Ivanović, Marija D., Ring, Matthias, Baronio, Fabio, Calza, Stefano, Vukčević, Vladan, Hadžievski, Ljupčo, Maluckov, Aleksandra, Eskofier, Bjoern Michael, "ECG derived feature combination versus single feature in predicting defibrillation success in out-of-hospital cardiac arrested patients" in Biomedical Physics and Engineering Express, 5, no. 1 (2018):015012,
https://doi.org/10.1088/2057-1976/aaebec . .
1
12
4
11

Application of multiparametric cardiac measurement system in ejection fraction calculation

Krmpot, Aleksandar J.; Lekić, Marina; Miletić, Marjan; Ivanović, Marija D.; Popović Maneski, Lana; Bojović, Boško

(Belgrade : Institute of Physics Belgrade, 2017)

TY  - CONF
AU  - Miletić, Marjan
AU  - Ivanović, Marija D.
AU  - Popović Maneski, Lana
AU  - Bojović, Boško
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7565
AB  - Ejection fraction (EF) is the most used parameter for characterisation of Heart Failure (HF) condition. EF is commonly calculated using echocardiography, which is an expensive non–invasive method and not used in primary healthcare. Systolic time intervals (STI) represent a non-invasive and inexpensive method for determination of EF[1, 2]. Heart failure (HF) is the single most expensive diagnosis in medicine. 2–3% of adult population in developed countries have HF diagnosis. It is not detectable by ECG test and it is commonly detected in a late stage, when the process is irreversible [2-5]. In this paper, a multiparametric cardiac measurement system for determination of STI is presented. Measurement system consists of sensors for simultaneous acquisition of electrocardiographic (ECG), phonocardiographic (PCG), photopletysmographic (PPG) and cardiovascular (CV) pulsation signals. CV pulsation signals are measured by long period grating (LPG) fiber-optic sensors[6]. Two non-invasive methods for measuring systolic time intervals (STI) were applied on a set of 6 healthy volunteers, based on ECG, PCG and CV pulsation signals. CV pulsation signals were measured on carotide arthery with PPG and LPG sensors. In the first method, EF was calculated from the obtained STI signals, using CV carotide pulsations measured with the PPG sensor, giving EF values in the range from 0.60 to 0.68, with maximal standard deviation of 0.05. In the second method, EF was obtained using CV carotide pulsations measured with LPG sensor, giving EF values in the range from 0.60 to 0.66, with maximal standard deviation 0.06. Calculated values of EF with both methods were in the 0.55 to 0.75 range which corresponds to normal EF range in healthy individuals.
PB  - Belgrade : Institute of Physics Belgrade
C3  - PHOTONICA2017 : 6th International School and Conference on Photonics and COST actions: MP1406 and MP1402 : Program and the book of abstracts
T1  - Application of multiparametric cardiac measurement system in ejection fraction calculation
SP  - 112
UR  - https://hdl.handle.net/21.15107/rcub_vinar_7565
ER  - 
@conference{
editor = "Krmpot, Aleksandar J., Lekić, Marina",
author = "Miletić, Marjan and Ivanović, Marija D. and Popović Maneski, Lana and Bojović, Boško",
year = "2017",
abstract = "Ejection fraction (EF) is the most used parameter for characterisation of Heart Failure (HF) condition. EF is commonly calculated using echocardiography, which is an expensive non–invasive method and not used in primary healthcare. Systolic time intervals (STI) represent a non-invasive and inexpensive method for determination of EF[1, 2]. Heart failure (HF) is the single most expensive diagnosis in medicine. 2–3% of adult population in developed countries have HF diagnosis. It is not detectable by ECG test and it is commonly detected in a late stage, when the process is irreversible [2-5]. In this paper, a multiparametric cardiac measurement system for determination of STI is presented. Measurement system consists of sensors for simultaneous acquisition of electrocardiographic (ECG), phonocardiographic (PCG), photopletysmographic (PPG) and cardiovascular (CV) pulsation signals. CV pulsation signals are measured by long period grating (LPG) fiber-optic sensors[6]. Two non-invasive methods for measuring systolic time intervals (STI) were applied on a set of 6 healthy volunteers, based on ECG, PCG and CV pulsation signals. CV pulsation signals were measured on carotide arthery with PPG and LPG sensors. In the first method, EF was calculated from the obtained STI signals, using CV carotide pulsations measured with the PPG sensor, giving EF values in the range from 0.60 to 0.68, with maximal standard deviation of 0.05. In the second method, EF was obtained using CV carotide pulsations measured with LPG sensor, giving EF values in the range from 0.60 to 0.66, with maximal standard deviation 0.06. Calculated values of EF with both methods were in the 0.55 to 0.75 range which corresponds to normal EF range in healthy individuals.",
publisher = "Belgrade : Institute of Physics Belgrade",
journal = "PHOTONICA2017 : 6th International School and Conference on Photonics and COST actions: MP1406 and MP1402 : Program and the book of abstracts",
title = "Application of multiparametric cardiac measurement system in ejection fraction calculation",
pages = "112",
url = "https://hdl.handle.net/21.15107/rcub_vinar_7565"
}
Krmpot, A. J., Lekić, M., Miletić, M., Ivanović, M. D., Popović Maneski, L.,& Bojović, B.. (2017). Application of multiparametric cardiac measurement system in ejection fraction calculation. in PHOTONICA2017 : 6th International School and Conference on Photonics and COST actions: MP1406 and MP1402 : Program and the book of abstracts
Belgrade : Institute of Physics Belgrade., 112.
https://hdl.handle.net/21.15107/rcub_vinar_7565
Krmpot AJ, Lekić M, Miletić M, Ivanović MD, Popović Maneski L, Bojović B. Application of multiparametric cardiac measurement system in ejection fraction calculation. in PHOTONICA2017 : 6th International School and Conference on Photonics and COST actions: MP1406 and MP1402 : Program and the book of abstracts. 2017;:112.
https://hdl.handle.net/21.15107/rcub_vinar_7565 .
Krmpot, Aleksandar J., Lekić, Marina, Miletić, Marjan, Ivanović, Marija D., Popović Maneski, Lana, Bojović, Boško, "Application of multiparametric cardiac measurement system in ejection fraction calculation" in PHOTONICA2017 : 6th International School and Conference on Photonics and COST actions: MP1406 and MP1402 : Program and the book of abstracts (2017):112,
https://hdl.handle.net/21.15107/rcub_vinar_7565 .

An improved design of optical sensor for long-term measurement of arterial blood flow waveform

Đurić, Biljana; Suzić, Slavica; Stojadinović, Bojana; Nestorović, Zorica; Ivanović, Marija D.; Suzić-Lazić, Jelena; Nešić, Dejan; Mazić, Sanja; Tenne, Tamar; Zikich, Dragoslav; Žikić, Dejan

(2017)

TY  - JOUR
AU  - Đurić, Biljana
AU  - Suzić, Slavica
AU  - Stojadinović, Bojana
AU  - Nestorović, Zorica
AU  - Ivanović, Marija D.
AU  - Suzić-Lazić, Jelena
AU  - Nešić, Dejan
AU  - Mazić, Sanja
AU  - Tenne, Tamar
AU  - Zikich, Dragoslav
AU  - Žikić, Dejan
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1655
AB  - We present here the improved design and development of optical sensor for non-invasive measurements of arterial blood flow waveform. The sensor is based on a physical principle of reflective photoplethysmography (PPG). As the light source we used serially connected infrared diodes whereas NPN silicon phototransistors were used as light detectors. The electronic components were molded into square package and poured with silicone. Such preparation produced an elastic superficies that allowed excellent attachment of the sensor on the skins surface. Moreover, a serial connection of infrared diodes and phototransistors completely eliminated signal artifacts caused by minor muscle contractions. The sensor recording performances were examined at the photoplethysmographic sites on three different arteries; the commune carotid, femoral and radial and, on each site the sensor demonstrated remarkable capability to make a consistent, reproducible measurements. Because of the advantageous physical and electrical properties, the new sensor is suitable for various cardiovascular diagnostics procedures, especially when long-term measurements of arterial blood flow waveform are required, for monitoring of different parameters in cardiovascular units and for research.
T2  - Biomedical Microdevices
T1  - An improved design of optical sensor for long-term measurement of arterial blood flow waveform
VL  - 19
IS  - 3
DO  - 10.1007/s10544-017-0196-x
ER  - 
@article{
author = "Đurić, Biljana and Suzić, Slavica and Stojadinović, Bojana and Nestorović, Zorica and Ivanović, Marija D. and Suzić-Lazić, Jelena and Nešić, Dejan and Mazić, Sanja and Tenne, Tamar and Zikich, Dragoslav and Žikić, Dejan",
year = "2017",
abstract = "We present here the improved design and development of optical sensor for non-invasive measurements of arterial blood flow waveform. The sensor is based on a physical principle of reflective photoplethysmography (PPG). As the light source we used serially connected infrared diodes whereas NPN silicon phototransistors were used as light detectors. The electronic components were molded into square package and poured with silicone. Such preparation produced an elastic superficies that allowed excellent attachment of the sensor on the skins surface. Moreover, a serial connection of infrared diodes and phototransistors completely eliminated signal artifacts caused by minor muscle contractions. The sensor recording performances were examined at the photoplethysmographic sites on three different arteries; the commune carotid, femoral and radial and, on each site the sensor demonstrated remarkable capability to make a consistent, reproducible measurements. Because of the advantageous physical and electrical properties, the new sensor is suitable for various cardiovascular diagnostics procedures, especially when long-term measurements of arterial blood flow waveform are required, for monitoring of different parameters in cardiovascular units and for research.",
journal = "Biomedical Microdevices",
title = "An improved design of optical sensor for long-term measurement of arterial blood flow waveform",
volume = "19",
number = "3",
doi = "10.1007/s10544-017-0196-x"
}
Đurić, B., Suzić, S., Stojadinović, B., Nestorović, Z., Ivanović, M. D., Suzić-Lazić, J., Nešić, D., Mazić, S., Tenne, T., Zikich, D.,& Žikić, D.. (2017). An improved design of optical sensor for long-term measurement of arterial blood flow waveform. in Biomedical Microdevices, 19(3).
https://doi.org/10.1007/s10544-017-0196-x
Đurić B, Suzić S, Stojadinović B, Nestorović Z, Ivanović MD, Suzić-Lazić J, Nešić D, Mazić S, Tenne T, Zikich D, Žikić D. An improved design of optical sensor for long-term measurement of arterial blood flow waveform. in Biomedical Microdevices. 2017;19(3).
doi:10.1007/s10544-017-0196-x .
Đurić, Biljana, Suzić, Slavica, Stojadinović, Bojana, Nestorović, Zorica, Ivanović, Marija D., Suzić-Lazić, Jelena, Nešić, Dejan, Mazić, Sanja, Tenne, Tamar, Zikich, Dragoslav, Žikić, Dejan, "An improved design of optical sensor for long-term measurement of arterial blood flow waveform" in Biomedical Microdevices, 19, no. 3 (2017),
https://doi.org/10.1007/s10544-017-0196-x . .
1
5
4
5

Monitoring of respiratory volumes by an long period grating sensor of bending

Raičević, Nevena; Ivanović, Marija D.; Beličev, Petar; Petrović, Jovana S.

(2016)

TY  - CONF
AU  - Raičević, Nevena
AU  - Ivanović, Marija D.
AU  - Beličev, Petar
AU  - Petrović, Jovana S.
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7099
AB  - Here, we present a method of respiratory volumes monitoring using a single fiber-grating sensor of bending. Measurements are conducted using simple monochromatic interrogation scheme that relies on a photodiode measurement of the power transmitted through a long period grating (LPG) sensor at fixed wavelength. Good sensor accuracy in measurements of tidal and minute respiratory volumes for different types of breathing is achieved.
C3  - Journal of Physics: Conference Series
T1  - Monitoring of respiratory volumes by an long period grating sensor of bending
VL  - 682
DO  - 10.1088/1742-6596/682/1/012008
ER  - 
@conference{
author = "Raičević, Nevena and Ivanović, Marija D. and Beličev, Petar and Petrović, Jovana S.",
year = "2016",
abstract = "Here, we present a method of respiratory volumes monitoring using a single fiber-grating sensor of bending. Measurements are conducted using simple monochromatic interrogation scheme that relies on a photodiode measurement of the power transmitted through a long period grating (LPG) sensor at fixed wavelength. Good sensor accuracy in measurements of tidal and minute respiratory volumes for different types of breathing is achieved.",
journal = "Journal of Physics: Conference Series",
title = "Monitoring of respiratory volumes by an long period grating sensor of bending",
volume = "682",
doi = "10.1088/1742-6596/682/1/012008"
}
Raičević, N., Ivanović, M. D., Beličev, P.,& Petrović, J. S.. (2016). Monitoring of respiratory volumes by an long period grating sensor of bending. in Journal of Physics: Conference Series, 682.
https://doi.org/10.1088/1742-6596/682/1/012008
Raičević N, Ivanović MD, Beličev P, Petrović JS. Monitoring of respiratory volumes by an long period grating sensor of bending. in Journal of Physics: Conference Series. 2016;682.
doi:10.1088/1742-6596/682/1/012008 .
Raičević, Nevena, Ivanović, Marija D., Beličev, Petar, Petrović, Jovana S., "Monitoring of respiratory volumes by an long period grating sensor of bending" in Journal of Physics: Conference Series, 682 (2016),
https://doi.org/10.1088/1742-6596/682/1/012008 . .
1
1
1