Salatić, Branislav

Link to this page

Authority KeyName Variants
44dd5ddc-b006-42c3-8970-6c61e6da6470
  • Salatić, Branislav (10)

Author's Bibliography

Inducing LIPSS on multilayer thin metal films by femtosecond laser beam of different orientations

Kovačević, Aleksander G.; Petrović, Suzana; Salatić, Branislav; Lekić, Marina; Vasić, Borislav Z.; Gajić, Radoš; Pantelić, Dejan; Jelenković, Branislav

(2020)

TY  - JOUR
AU  - Kovačević, Aleksander G.
AU  - Petrović, Suzana
AU  - Salatić, Branislav
AU  - Lekić, Marina
AU  - Vasić, Borislav Z.
AU  - Gajić, Radoš
AU  - Pantelić, Dejan
AU  - Jelenković, Branislav
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9015
AB  - The occurrence of laser-induced periodic surface structures (LIPSS) has been known for a while. Multilayer thin films, like Al/Ti, are suitable for LIPSS formation and attractive for applications—due to their wearing behavior and corrosion resistance; LIPSS generation may improve their properties as well. LIPSS properties depend not only on the material but also on the beam characteristics, like wavelength, polarization and scanning directions, etc. After exposing with NIR femtosecond pulses from Coherent Mira 900 laser system in several beam exposures, we have analyzed the samples of thin metal film systems with Tescan Mira3 SEM and NTegra AFM. The formation of LIPSS is most probably due to the generation of surface plasmon polariton, through the periodic distribution of energy in the interaction zone which lead to thermal processes in layers and interfaces. Two types of LIPSS were generated, which differ in shape, orientation and in ablation pronounced or not. For consecutive interactions in the same direction, LIPSS maintained its orientation, while for orthogonal passes LIPSS with mutually orthogonal orientation were generated. LIPSS period fluctuated between 320 and 380 nm and structures with pronounced ablation have significantly smaller width. Probable mechanism is that for greater accumulated energy pronounced ablation takes place giving LIPSS in the form of trenches or grooves, while for less accumulated energy the buildup of the material—probably due to pronounced oxidation—lead to LIPSS in the form of hills or ridges.
T2  - Optical and Quantum Electronics
T1  - Inducing LIPSS on multilayer thin metal films by femtosecond laser beam of different orientations
VL  - 52
IS  - 6
SP  - 301
DO  - 10.1007/s11082-020-02398-2
ER  - 
@article{
author = "Kovačević, Aleksander G. and Petrović, Suzana and Salatić, Branislav and Lekić, Marina and Vasić, Borislav Z. and Gajić, Radoš and Pantelić, Dejan and Jelenković, Branislav",
year = "2020",
abstract = "The occurrence of laser-induced periodic surface structures (LIPSS) has been known for a while. Multilayer thin films, like Al/Ti, are suitable for LIPSS formation and attractive for applications—due to their wearing behavior and corrosion resistance; LIPSS generation may improve their properties as well. LIPSS properties depend not only on the material but also on the beam characteristics, like wavelength, polarization and scanning directions, etc. After exposing with NIR femtosecond pulses from Coherent Mira 900 laser system in several beam exposures, we have analyzed the samples of thin metal film systems with Tescan Mira3 SEM and NTegra AFM. The formation of LIPSS is most probably due to the generation of surface plasmon polariton, through the periodic distribution of energy in the interaction zone which lead to thermal processes in layers and interfaces. Two types of LIPSS were generated, which differ in shape, orientation and in ablation pronounced or not. For consecutive interactions in the same direction, LIPSS maintained its orientation, while for orthogonal passes LIPSS with mutually orthogonal orientation were generated. LIPSS period fluctuated between 320 and 380 nm and structures with pronounced ablation have significantly smaller width. Probable mechanism is that for greater accumulated energy pronounced ablation takes place giving LIPSS in the form of trenches or grooves, while for less accumulated energy the buildup of the material—probably due to pronounced oxidation—lead to LIPSS in the form of hills or ridges.",
journal = "Optical and Quantum Electronics",
title = "Inducing LIPSS on multilayer thin metal films by femtosecond laser beam of different orientations",
volume = "52",
number = "6",
pages = "301",
doi = "10.1007/s11082-020-02398-2"
}
Kovačević, A. G., Petrović, S., Salatić, B., Lekić, M., Vasić, B. Z., Gajić, R., Pantelić, D.,& Jelenković, B.. (2020). Inducing LIPSS on multilayer thin metal films by femtosecond laser beam of different orientations. in Optical and Quantum Electronics, 52(6), 301.
https://doi.org/10.1007/s11082-020-02398-2
Kovačević AG, Petrović S, Salatić B, Lekić M, Vasić BZ, Gajić R, Pantelić D, Jelenković B. Inducing LIPSS on multilayer thin metal films by femtosecond laser beam of different orientations. in Optical and Quantum Electronics. 2020;52(6):301.
doi:10.1007/s11082-020-02398-2 .
Kovačević, Aleksander G., Petrović, Suzana, Salatić, Branislav, Lekić, Marina, Vasić, Borislav Z., Gajić, Radoš, Pantelić, Dejan, Jelenković, Branislav, "Inducing LIPSS on multilayer thin metal films by femtosecond laser beam of different orientations" in Optical and Quantum Electronics, 52, no. 6 (2020):301,
https://doi.org/10.1007/s11082-020-02398-2 . .

Laser induced mixing in multilayered Ti/Ta thin film structures

Obradović, Marko O.; Kovač, Janez; Petrović, Suzana; Lazović, Vladimir M.; Salatić, Branislav; Ciganović, Jovan; Pjević, Dejan J.; Milosavljević, Momir; Peruško, Davor

(2018)

TY  - JOUR
AU  - Obradović, Marko O.
AU  - Kovač, Janez
AU  - Petrović, Suzana
AU  - Lazović, Vladimir M.
AU  - Salatić, Branislav
AU  - Ciganović, Jovan
AU  - Pjević, Dejan J.
AU  - Milosavljević, Momir
AU  - Peruško, Davor
PY  - 2018
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7721
AB  - The possibility of interlayer mixing in a Ti/Ta multilayer system, induced by laser irradiation, was the main purpose of these experiments. Ti/Ta multilayer system, consisting of ten alternating Ti and Ta thin films and covered by slightly thicker Ti layer, was deposited on Si (100) wafers to a total thickness of 205 nm. Laser irradiation was performed in air by picoseconds Nd:YAG laser pulses in defocused regime with fluences of 0.057 and 0.11 J cm−2. Laser beam was scanned over the 5 × 5 mm surface area with different steps along y-axes. Structural and compositional characterisation was done by auger electron spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy. Laser processing at lower fluence caused only oxidation of the top Ti layer, despite of the number of applied laser pulses. Interlayer mixing was not observed. Application of laser pulses at fluence of 0.11 J cm−2caused partial and/or complete ablation of deposited layers. In partially ablated regions considerable mixing between Ti and Ta films was registered.
T2  - Optical and Quantum Electronics
T1  - Laser induced mixing in multilayered Ti/Ta thin film structures
VL  - 50
IS  - 6
SP  - 257
DO  - 10.1007/s11082-018-1525-x
ER  - 
@article{
author = "Obradović, Marko O. and Kovač, Janez and Petrović, Suzana and Lazović, Vladimir M. and Salatić, Branislav and Ciganović, Jovan and Pjević, Dejan J. and Milosavljević, Momir and Peruško, Davor",
year = "2018",
abstract = "The possibility of interlayer mixing in a Ti/Ta multilayer system, induced by laser irradiation, was the main purpose of these experiments. Ti/Ta multilayer system, consisting of ten alternating Ti and Ta thin films and covered by slightly thicker Ti layer, was deposited on Si (100) wafers to a total thickness of 205 nm. Laser irradiation was performed in air by picoseconds Nd:YAG laser pulses in defocused regime with fluences of 0.057 and 0.11 J cm−2. Laser beam was scanned over the 5 × 5 mm surface area with different steps along y-axes. Structural and compositional characterisation was done by auger electron spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy. Laser processing at lower fluence caused only oxidation of the top Ti layer, despite of the number of applied laser pulses. Interlayer mixing was not observed. Application of laser pulses at fluence of 0.11 J cm−2caused partial and/or complete ablation of deposited layers. In partially ablated regions considerable mixing between Ti and Ta films was registered.",
journal = "Optical and Quantum Electronics",
title = "Laser induced mixing in multilayered Ti/Ta thin film structures",
volume = "50",
number = "6",
pages = "257",
doi = "10.1007/s11082-018-1525-x"
}
Obradović, M. O., Kovač, J., Petrović, S., Lazović, V. M., Salatić, B., Ciganović, J., Pjević, D. J., Milosavljević, M.,& Peruško, D.. (2018). Laser induced mixing in multilayered Ti/Ta thin film structures. in Optical and Quantum Electronics, 50(6), 257.
https://doi.org/10.1007/s11082-018-1525-x
Obradović MO, Kovač J, Petrović S, Lazović VM, Salatić B, Ciganović J, Pjević DJ, Milosavljević M, Peruško D. Laser induced mixing in multilayered Ti/Ta thin film structures. in Optical and Quantum Electronics. 2018;50(6):257.
doi:10.1007/s11082-018-1525-x .
Obradović, Marko O., Kovač, Janez, Petrović, Suzana, Lazović, Vladimir M., Salatić, Branislav, Ciganović, Jovan, Pjević, Dejan J., Milosavljević, Momir, Peruško, Davor, "Laser induced mixing in multilayered Ti/Ta thin film structures" in Optical and Quantum Electronics, 50, no. 6 (2018):257,
https://doi.org/10.1007/s11082-018-1525-x . .

Selective Al-Ti reactivity in laser-processed Al/Ti multilayers

Peruško, Davor; Kovač, Janez; Petrović, Suzana; Obradović, Marko O.; Mitrić, Miodrag; Pavlović, Vladimir B.; Salatić, Branislav; Jaksa, G.; Ciganović, Jovan; Milosavljević, Momir

(2017)

TY  - JOUR
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Petrović, Suzana
AU  - Obradović, Marko O.
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
AU  - Salatić, Branislav
AU  - Jaksa, G.
AU  - Ciganović, Jovan
AU  - Milosavljević, Momir
PY  - 2017
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1725
AB  - Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Youngs modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.
T2  - Materials and Manufacturing Processes
T1  - Selective Al-Ti reactivity in laser-processed Al/Ti multilayers
VL  - 32
IS  - 14
SP  - 1622
EP  - 1627
DO  - 10.1080/10426914.2017.1279299
ER  - 
@article{
author = "Peruško, Davor and Kovač, Janez and Petrović, Suzana and Obradović, Marko O. and Mitrić, Miodrag and Pavlović, Vladimir B. and Salatić, Branislav and Jaksa, G. and Ciganović, Jovan and Milosavljević, Momir",
year = "2017",
abstract = "Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Youngs modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.",
journal = "Materials and Manufacturing Processes",
title = "Selective Al-Ti reactivity in laser-processed Al/Ti multilayers",
volume = "32",
number = "14",
pages = "1622-1627",
doi = "10.1080/10426914.2017.1279299"
}
Peruško, D., Kovač, J., Petrović, S., Obradović, M. O., Mitrić, M., Pavlović, V. B., Salatić, B., Jaksa, G., Ciganović, J.,& Milosavljević, M.. (2017). Selective Al-Ti reactivity in laser-processed Al/Ti multilayers. in Materials and Manufacturing Processes, 32(14), 1622-1627.
https://doi.org/10.1080/10426914.2017.1279299
Peruško D, Kovač J, Petrović S, Obradović MO, Mitrić M, Pavlović VB, Salatić B, Jaksa G, Ciganović J, Milosavljević M. Selective Al-Ti reactivity in laser-processed Al/Ti multilayers. in Materials and Manufacturing Processes. 2017;32(14):1622-1627.
doi:10.1080/10426914.2017.1279299 .
Peruško, Davor, Kovač, Janez, Petrović, Suzana, Obradović, Marko O., Mitrić, Miodrag, Pavlović, Vladimir B., Salatić, Branislav, Jaksa, G., Ciganović, Jovan, Milosavljević, Momir, "Selective Al-Ti reactivity in laser-processed Al/Ti multilayers" in Materials and Manufacturing Processes, 32, no. 14 (2017):1622-1627,
https://doi.org/10.1080/10426914.2017.1279299 . .
2
2
2

Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system

Salatić, Branislav; Petrović, Suzana; Peruško, Davor; Čekada, Miha; Panjan, Peter; Pantelić, Dejan; Jelenković, Branislav

(Elsevier, 2016)

TY  - JOUR
AU  - Salatić, Branislav
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Čekada, Miha
AU  - Panjan, Peter
AU  - Pantelić, Dejan
AU  - Jelenković, Branislav
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/858
AB  - The surface morphology of the ablation craters created in the multilayer 10x(Al/Ti)/Si system by nanosecond laser pulses at single- and dual wavelength has been studied experimentally and numerically. A complex multilayer thin film including ten (Al/Ti) bilayers deposited by ion sputtering on Si(1 0 0) substrate to a total thickness of 260 nm were illuminated at different laser irradiance in the range 0.25-3.5 x 10(9)W cm(-2). Single pulse laser irradiation was done at normal incidence in air, with the single wavelength, either at 532 nm or 1064 nm or with both laser light simultaneously in the ratio of 1: 10 for energy per pulse between second harmonic and 1064 nm. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the sample surface. The results show an increase in surface roughness, formation of specific nanostructures, appearance of hydrodynamic features and ablation of surface material with crater formation. Applying a small fraction (10%) of the second harmonic in dual-wavelength pulses, a modification of the 10x(Al/Ti)/Si system by a single laser pulse was reflected in the formation of wider and/or deeper craters. Numerical calculations show that the main physical mechanism in ablation process is normal evaporation without phase explosion. The calculated and experimental results agree relatively well for the whole irradiance range, what makes the model applicable to complex Al/Ti multilayer systems. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Applied Surface Science
T1  - Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system
VL  - 360
SP  - 559
EP  - 565
DO  - 10.1016/j.apsusc.2015.10.203
ER  - 
@article{
author = "Salatić, Branislav and Petrović, Suzana and Peruško, Davor and Čekada, Miha and Panjan, Peter and Pantelić, Dejan and Jelenković, Branislav",
year = "2016",
abstract = "The surface morphology of the ablation craters created in the multilayer 10x(Al/Ti)/Si system by nanosecond laser pulses at single- and dual wavelength has been studied experimentally and numerically. A complex multilayer thin film including ten (Al/Ti) bilayers deposited by ion sputtering on Si(1 0 0) substrate to a total thickness of 260 nm were illuminated at different laser irradiance in the range 0.25-3.5 x 10(9)W cm(-2). Single pulse laser irradiation was done at normal incidence in air, with the single wavelength, either at 532 nm or 1064 nm or with both laser light simultaneously in the ratio of 1: 10 for energy per pulse between second harmonic and 1064 nm. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the sample surface. The results show an increase in surface roughness, formation of specific nanostructures, appearance of hydrodynamic features and ablation of surface material with crater formation. Applying a small fraction (10%) of the second harmonic in dual-wavelength pulses, a modification of the 10x(Al/Ti)/Si system by a single laser pulse was reflected in the formation of wider and/or deeper craters. Numerical calculations show that the main physical mechanism in ablation process is normal evaporation without phase explosion. The calculated and experimental results agree relatively well for the whole irradiance range, what makes the model applicable to complex Al/Ti multilayer systems. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Applied Surface Science",
title = "Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system",
volume = "360",
pages = "559-565",
doi = "10.1016/j.apsusc.2015.10.203"
}
Salatić, B., Petrović, S., Peruško, D., Čekada, M., Panjan, P., Pantelić, D.,& Jelenković, B.. (2016). Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system. in Applied Surface Science
Elsevier., 360, 559-565.
https://doi.org/10.1016/j.apsusc.2015.10.203
Salatić B, Petrović S, Peruško D, Čekada M, Panjan P, Pantelić D, Jelenković B. Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system. in Applied Surface Science. 2016;360:559-565.
doi:10.1016/j.apsusc.2015.10.203 .
Salatić, Branislav, Petrović, Suzana, Peruško, Davor, Čekada, Miha, Panjan, Peter, Pantelić, Dejan, Jelenković, Branislav, "Single- and dual-wavelength laser pulses induced modification in 10x(Al/Ti)/Si multilayer system" in Applied Surface Science, 360 (2016):559-565,
https://doi.org/10.1016/j.apsusc.2015.10.203 . .
3
2
3

Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths

Salatić, Branislav; Petrović, Suzana; Peruško, Davor; Čekada, Miha; Jelenković, Branislav; Pantelić, Dejan

(2016)

TY  - JOUR
AU  - Salatić, Branislav
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Čekada, Miha
AU  - Jelenković, Branislav
AU  - Pantelić, Dejan
PY  - 2016
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/1108
AB  - A study of the effects of laser irradiation on the morphology and composition of Ni/Ti multilayers induced by nanosecond laser pulses at different wavelengths is reported. Irradiation of complex 109(Ni/Ti)/Si sample was done by a Nd:YAG laser which operate at a 1064 nm wavelength, frequency doubled wavelength (532 nm) and dual-wavelength (1064 and 532 nm). The following surface morphological changes were observed: (1) ablation of the thin film during the first laser pulse and (2) appearance of some nanostructures (mosaic structure) in the irradiated region. After action of one pulse, the boundary of damage area was relatively sharp at low pulse energy, whereas it was diffuse after irradiation with higher energy per pulse. The results obtained show that laser irradiation induced mixing between Ni and Ti layers which creates conditions for the formation of intermetallic compounds. A numerical model was used to predict ablation depths and temperatures inside the material during the time. The model prediction shows a close agreement with experimental data.
T2  - Optical and Quantum Electronics
T1  - Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths
VL  - 48
IS  - 6
DO  - 10.1007/s11082-016-0503-4
ER  - 
@article{
author = "Salatić, Branislav and Petrović, Suzana and Peruško, Davor and Čekada, Miha and Jelenković, Branislav and Pantelić, Dejan",
year = "2016",
abstract = "A study of the effects of laser irradiation on the morphology and composition of Ni/Ti multilayers induced by nanosecond laser pulses at different wavelengths is reported. Irradiation of complex 109(Ni/Ti)/Si sample was done by a Nd:YAG laser which operate at a 1064 nm wavelength, frequency doubled wavelength (532 nm) and dual-wavelength (1064 and 532 nm). The following surface morphological changes were observed: (1) ablation of the thin film during the first laser pulse and (2) appearance of some nanostructures (mosaic structure) in the irradiated region. After action of one pulse, the boundary of damage area was relatively sharp at low pulse energy, whereas it was diffuse after irradiation with higher energy per pulse. The results obtained show that laser irradiation induced mixing between Ni and Ti layers which creates conditions for the formation of intermetallic compounds. A numerical model was used to predict ablation depths and temperatures inside the material during the time. The model prediction shows a close agreement with experimental data.",
journal = "Optical and Quantum Electronics",
title = "Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths",
volume = "48",
number = "6",
doi = "10.1007/s11082-016-0503-4"
}
Salatić, B., Petrović, S., Peruško, D., Čekada, M., Jelenković, B.,& Pantelić, D.. (2016). Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths. in Optical and Quantum Electronics, 48(6).
https://doi.org/10.1007/s11082-016-0503-4
Salatić B, Petrović S, Peruško D, Čekada M, Jelenković B, Pantelić D. Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths. in Optical and Quantum Electronics. 2016;48(6).
doi:10.1007/s11082-016-0503-4 .
Salatić, Branislav, Petrović, Suzana, Peruško, Davor, Čekada, Miha, Jelenković, Branislav, Pantelić, Dejan, "Laser irradiation of 10x(Ni/Ti)/Si multilayers at different wavelengths" in Optical and Quantum Electronics, 48, no. 6 (2016),
https://doi.org/10.1007/s11082-016-0503-4 . .
1
1
1

Agglomeration in core-shell structure of CuAg nanoparticles synthesized by the laser ablation of Cu target in aqueous solutions

Petrović, Suzana; Salatić, Branislav; Milovanović, Dubravka S.; Lazović, Vladimir M.; Živković, Ljiljana; Trtica, Milan; Jelenković, Branislav

(2015)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Salatić, Branislav
AU  - Milovanović, Dubravka S.
AU  - Lazović, Vladimir M.
AU  - Živković, Ljiljana
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/392
AB  - Metallic copper Cu and bimetallic copper-silver CuAg nanoparticles (NPs) are generated by the ablation of copper bulk target in water and aqueous Ag colloidal solution, respectively. The experiments were performed using nanosecond Nd: YAG laser operating at 1064 nm. The generated NPs are characterized by UV-vis absorption spectroscopy, laser-induced breakdown spectroscopy, dynamic light scattering and scanning electron microscopy. The conducted investigations can be summarized as follows: (i) CuAg NPs colloidal solution possess the absorption in UV-vis spectral region, which can be attributed to the Cu-component; (ii) the primary bimetallic CuAg NPs have near uniform dimensions with diameter of about 15 nm, and as a rule, they are grouped into larger agglomerates without defined morphology; (iii) the obtained Cu NPs have mainly spherical form with average diameters up to 20 nm. Both types of NPs show a tendency towards the formation of large agglomerates with different morphology. Bimetallic NPs show the plasmon resonance in the vicinity of 640 nm with a good coincidence with formation of the colloidal solution of pure Cu NPs. The results also demonstrate that the core-shell structure (Ag-rich core/Cu-rich shell) is important for the formation of the bimetallic NPs, also agreeing very well with theory.
T2  - Journal of Optics
T1  - Agglomeration in core-shell structure of CuAg nanoparticles synthesized by the laser ablation of Cu target in aqueous solutions
VL  - 17
IS  - 2
DO  - 10.1088/2040-8978/17/2/025402
ER  - 
@article{
author = "Petrović, Suzana and Salatić, Branislav and Milovanović, Dubravka S. and Lazović, Vladimir M. and Živković, Ljiljana and Trtica, Milan and Jelenković, Branislav",
year = "2015",
abstract = "Metallic copper Cu and bimetallic copper-silver CuAg nanoparticles (NPs) are generated by the ablation of copper bulk target in water and aqueous Ag colloidal solution, respectively. The experiments were performed using nanosecond Nd: YAG laser operating at 1064 nm. The generated NPs are characterized by UV-vis absorption spectroscopy, laser-induced breakdown spectroscopy, dynamic light scattering and scanning electron microscopy. The conducted investigations can be summarized as follows: (i) CuAg NPs colloidal solution possess the absorption in UV-vis spectral region, which can be attributed to the Cu-component; (ii) the primary bimetallic CuAg NPs have near uniform dimensions with diameter of about 15 nm, and as a rule, they are grouped into larger agglomerates without defined morphology; (iii) the obtained Cu NPs have mainly spherical form with average diameters up to 20 nm. Both types of NPs show a tendency towards the formation of large agglomerates with different morphology. Bimetallic NPs show the plasmon resonance in the vicinity of 640 nm with a good coincidence with formation of the colloidal solution of pure Cu NPs. The results also demonstrate that the core-shell structure (Ag-rich core/Cu-rich shell) is important for the formation of the bimetallic NPs, also agreeing very well with theory.",
journal = "Journal of Optics",
title = "Agglomeration in core-shell structure of CuAg nanoparticles synthesized by the laser ablation of Cu target in aqueous solutions",
volume = "17",
number = "2",
doi = "10.1088/2040-8978/17/2/025402"
}
Petrović, S., Salatić, B., Milovanović, D. S., Lazović, V. M., Živković, L., Trtica, M.,& Jelenković, B.. (2015). Agglomeration in core-shell structure of CuAg nanoparticles synthesized by the laser ablation of Cu target in aqueous solutions. in Journal of Optics, 17(2).
https://doi.org/10.1088/2040-8978/17/2/025402
Petrović S, Salatić B, Milovanović DS, Lazović VM, Živković L, Trtica M, Jelenković B. Agglomeration in core-shell structure of CuAg nanoparticles synthesized by the laser ablation of Cu target in aqueous solutions. in Journal of Optics. 2015;17(2).
doi:10.1088/2040-8978/17/2/025402 .
Petrović, Suzana, Salatić, Branislav, Milovanović, Dubravka S., Lazović, Vladimir M., Živković, Ljiljana, Trtica, Milan, Jelenković, Branislav, "Agglomeration in core-shell structure of CuAg nanoparticles synthesized by the laser ablation of Cu target in aqueous solutions" in Journal of Optics, 17, no. 2 (2015),
https://doi.org/10.1088/2040-8978/17/2/025402 . .
1
8
8
8

Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution

Petrović, Suzana; Milovanović, Dubravka S.; Salatić, Branislav; Peruško, Davor; Kovač, Janez; Dražić, Goran; Mitrić, Miodrag; Trtica, Milan; Jelenković, Branislav

(Elsevier, 2015)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Milovanović, Dubravka S.
AU  - Salatić, Branislav
AU  - Peruško, Davor
AU  - Kovač, Janez
AU  - Dražić, Goran
AU  - Mitrić, Miodrag
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/807
AB  - Bimetallic NiAu and complex NiO:Au nanoparticles were formed by laser ablation of Ni target immersed in the colloidal gold solution. Effect of laser parameters (pulse duration, fluences and ablation times) on size and composition of nanoparticles was investigated by ablating the target with two Nd:YAG lasers at 1064 nm, operating with different pulse durations, 150 ps and 20 ns. Stronger ablation of the Ni target and subsequient synthesis of nanoparticles is achieved with picosecond pulses, compared to the nanoparticles production with nanosecond pulses, because the former ablation induces activation of different reactions between species in the colloidal solution. Shape, size and composition of the synthesized nanopraticles were found to correlate with the concentration of Ni species in the colloidal solution. Higher Ni concentration leads to formation of larger NiAu nanoparticles in form of solid solution. Smaller nanoparticles with lower Ni concentration in the colloidal solution were achieved by their synthesis during nanosecond pulses, when the obtained distribution of composition corresponds to the NiO matrix with incorporated golden nanoparticles. The results also demonstrate that the formation of bimetallic NiAu and complex NiO:Au nanoparticles were possible by means of laser ablation in liquids. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution
VL  - 166
SP  - 223
EP  - 232
DO  - 10.1016/j.matchemphys.2015.10.007
ER  - 
@article{
author = "Petrović, Suzana and Milovanović, Dubravka S. and Salatić, Branislav and Peruško, Davor and Kovač, Janez and Dražić, Goran and Mitrić, Miodrag and Trtica, Milan and Jelenković, Branislav",
year = "2015",
abstract = "Bimetallic NiAu and complex NiO:Au nanoparticles were formed by laser ablation of Ni target immersed in the colloidal gold solution. Effect of laser parameters (pulse duration, fluences and ablation times) on size and composition of nanoparticles was investigated by ablating the target with two Nd:YAG lasers at 1064 nm, operating with different pulse durations, 150 ps and 20 ns. Stronger ablation of the Ni target and subsequient synthesis of nanoparticles is achieved with picosecond pulses, compared to the nanoparticles production with nanosecond pulses, because the former ablation induces activation of different reactions between species in the colloidal solution. Shape, size and composition of the synthesized nanopraticles were found to correlate with the concentration of Ni species in the colloidal solution. Higher Ni concentration leads to formation of larger NiAu nanoparticles in form of solid solution. Smaller nanoparticles with lower Ni concentration in the colloidal solution were achieved by their synthesis during nanosecond pulses, when the obtained distribution of composition corresponds to the NiO matrix with incorporated golden nanoparticles. The results also demonstrate that the formation of bimetallic NiAu and complex NiO:Au nanoparticles were possible by means of laser ablation in liquids. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution",
volume = "166",
pages = "223-232",
doi = "10.1016/j.matchemphys.2015.10.007"
}
Petrović, S., Milovanović, D. S., Salatić, B., Peruško, D., Kovač, J., Dražić, G., Mitrić, M., Trtica, M.,& Jelenković, B.. (2015). Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution. in Materials Chemistry and Physics
Elsevier., 166, 223-232.
https://doi.org/10.1016/j.matchemphys.2015.10.007
Petrović S, Milovanović DS, Salatić B, Peruško D, Kovač J, Dražić G, Mitrić M, Trtica M, Jelenković B. Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution. in Materials Chemistry and Physics. 2015;166:223-232.
doi:10.1016/j.matchemphys.2015.10.007 .
Petrović, Suzana, Milovanović, Dubravka S., Salatić, Branislav, Peruško, Davor, Kovač, Janez, Dražić, Goran, Mitrić, Miodrag, Trtica, Milan, Jelenković, Branislav, "Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution" in Materials Chemistry and Physics, 166 (2015):223-232,
https://doi.org/10.1016/j.matchemphys.2015.10.007 . .
7
7
6

Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids

Petrović, Suzana; Salatić, Branislav; Peruško, Davor; Bogdanović-Radović, Ivančica; Cekada, Miha; Gaković, Biljana M.; Pantelić, Dejan; Trtica, Milan; Jelenković, Branislav

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Salatić, Branislav
AU  - Peruško, Davor
AU  - Bogdanović-Radović, Ivančica
AU  - Cekada, Miha
AU  - Gaković, Biljana M.
AU  - Pantelić, Dejan
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5456
AB  - The interaction of an Er, Yb, Cr-glass laser, operating at 1540 nm wavelength and a pulse duration of 40 ns, with Ni/Ti multilayer thin films has been studied. Five (Ni/Ti) bilayers deposited by DC ion sputtering on Si(100) wafers to a total thickness of about 180 nm were treated with laser fluences of about 6.4 and 8.8 J cm(-2). Single and multi-pulse laser irradiation was done at normal incidence in air, water and ethanol ambients. The composition and surface morphology were monitored by particle-induced x-ray emission, Rutherford backscattering spectrometry (RBS), scanning electron microscopy and profilometry. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the target surface. The results show an increase in surface roughness, formation of parallel periodic surface structures, appearance of hydrodynamic features and ablation of surface material. RBS analysis revealed that laser modification induced inter-mixing between the components of individual Ni and Ti layers, with indications of the formation of NiTi intermetallic compounds. An interesting finding is the morphological changes dominant in the Si substrate, whereas the Ni/Ti multilayer structure has mainly undergone changes in the chemical composition.
T2  - Laser Physics
T1  - Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids
VL  - 23
IS  - 2
DO  - 10.1088/1054-660X/23/2/026004
ER  - 
@article{
author = "Petrović, Suzana and Salatić, Branislav and Peruško, Davor and Bogdanović-Radović, Ivančica and Cekada, Miha and Gaković, Biljana M. and Pantelić, Dejan and Trtica, Milan and Jelenković, Branislav",
year = "2013",
abstract = "The interaction of an Er, Yb, Cr-glass laser, operating at 1540 nm wavelength and a pulse duration of 40 ns, with Ni/Ti multilayer thin films has been studied. Five (Ni/Ti) bilayers deposited by DC ion sputtering on Si(100) wafers to a total thickness of about 180 nm were treated with laser fluences of about 6.4 and 8.8 J cm(-2). Single and multi-pulse laser irradiation was done at normal incidence in air, water and ethanol ambients. The composition and surface morphology were monitored by particle-induced x-ray emission, Rutherford backscattering spectrometry (RBS), scanning electron microscopy and profilometry. Most of the absorbed laser energy was rapidly transformed into heat, producing intensive modifications of composition and morphology on the target surface. The results show an increase in surface roughness, formation of parallel periodic surface structures, appearance of hydrodynamic features and ablation of surface material. RBS analysis revealed that laser modification induced inter-mixing between the components of individual Ni and Ti layers, with indications of the formation of NiTi intermetallic compounds. An interesting finding is the morphological changes dominant in the Si substrate, whereas the Ni/Ti multilayer structure has mainly undergone changes in the chemical composition.",
journal = "Laser Physics",
title = "Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids",
volume = "23",
number = "2",
doi = "10.1088/1054-660X/23/2/026004"
}
Petrović, S., Salatić, B., Peruško, D., Bogdanović-Radović, I., Cekada, M., Gaković, B. M., Pantelić, D., Trtica, M.,& Jelenković, B.. (2013). Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids. in Laser Physics, 23(2).
https://doi.org/10.1088/1054-660X/23/2/026004
Petrović S, Salatić B, Peruško D, Bogdanović-Radović I, Cekada M, Gaković BM, Pantelić D, Trtica M, Jelenković B. Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids. in Laser Physics. 2013;23(2).
doi:10.1088/1054-660X/23/2/026004 .
Petrović, Suzana, Salatić, Branislav, Peruško, Davor, Bogdanović-Radović, Ivančica, Cekada, Miha, Gaković, Biljana M., Pantelić, Dejan, Trtica, Milan, Jelenković, Branislav, "Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids" in Laser Physics, 23, no. 2 (2013),
https://doi.org/10.1088/1054-660X/23/2/026004 . .

Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions

Petrović, Suzana; Peruško, Davor; Salatić, Branislav; Bogdanović-Radović, Ivančica; Panjan, Peter; Gaković, Biljana M.; Pantelić, Dejan; Trtica, Milan; Jelenković, Branislav

(2013)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Peruško, Davor
AU  - Salatić, Branislav
AU  - Bogdanović-Radović, Ivančica
AU  - Panjan, Peter
AU  - Gaković, Biljana M.
AU  - Pantelić, Dejan
AU  - Trtica, Milan
AU  - Jelenković, Branislav
PY  - 2013
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5661
AB  - A study of morphological and composition changes of the (8(Al/Ti)/Si) system induced by laser pulses in different ambient conditions is presented. The effects of an Er, Yb, Cr-Glass laser, operating at 1540 nm wavelength with pulse duration of 44 ns, on a complex target were investigated. Irradiation of 8(Al/Ti)/Si was carried out at intensities of 5.9 and 9.5 x 10(11) W m(-2) in air, water and ethanol. The laser-induced morphological and composition modifications have shown dependence on applied intensities, number of laser pulses and ambient conditions. The following morphological changes were observed: (i) intense surface melting of the thin film and Si-substrate; (ii) ablation/exfoliation of the 8(Al/Ti) multilayer thin film from Si, (iii) appearance of hydrodynamic features such as resolidified material, and (iv) formation of crater at multi-pulse action. The formation of parallel periodic surface structure was only occurring in single pulse air-assisted modification. Analysis of the composition revealed that laser modification induced intermixing between the components of individual Al and Ti layers with potential formation of AlTi intermetallic compounds. (C) 2013 Elsevier Ltd. All rights reserved.
T2  - Optics and Laser Technology
T1  - Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions
VL  - 54
SP  - 22
EP  - 29
DO  - 10.1016/j.optlastec.2013.04.030
ER  - 
@article{
author = "Petrović, Suzana and Peruško, Davor and Salatić, Branislav and Bogdanović-Radović, Ivančica and Panjan, Peter and Gaković, Biljana M. and Pantelić, Dejan and Trtica, Milan and Jelenković, Branislav",
year = "2013",
abstract = "A study of morphological and composition changes of the (8(Al/Ti)/Si) system induced by laser pulses in different ambient conditions is presented. The effects of an Er, Yb, Cr-Glass laser, operating at 1540 nm wavelength with pulse duration of 44 ns, on a complex target were investigated. Irradiation of 8(Al/Ti)/Si was carried out at intensities of 5.9 and 9.5 x 10(11) W m(-2) in air, water and ethanol. The laser-induced morphological and composition modifications have shown dependence on applied intensities, number of laser pulses and ambient conditions. The following morphological changes were observed: (i) intense surface melting of the thin film and Si-substrate; (ii) ablation/exfoliation of the 8(Al/Ti) multilayer thin film from Si, (iii) appearance of hydrodynamic features such as resolidified material, and (iv) formation of crater at multi-pulse action. The formation of parallel periodic surface structure was only occurring in single pulse air-assisted modification. Analysis of the composition revealed that laser modification induced intermixing between the components of individual Al and Ti layers with potential formation of AlTi intermetallic compounds. (C) 2013 Elsevier Ltd. All rights reserved.",
journal = "Optics and Laser Technology",
title = "Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions",
volume = "54",
pages = "22-29",
doi = "10.1016/j.optlastec.2013.04.030"
}
Petrović, S., Peruško, D., Salatić, B., Bogdanović-Radović, I., Panjan, P., Gaković, B. M., Pantelić, D., Trtica, M.,& Jelenković, B.. (2013). Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions. in Optics and Laser Technology, 54, 22-29.
https://doi.org/10.1016/j.optlastec.2013.04.030
Petrović S, Peruško D, Salatić B, Bogdanović-Radović I, Panjan P, Gaković BM, Pantelić D, Trtica M, Jelenković B. Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions. in Optics and Laser Technology. 2013;54:22-29.
doi:10.1016/j.optlastec.2013.04.030 .
Petrović, Suzana, Peruško, Davor, Salatić, Branislav, Bogdanović-Radović, Ivančica, Panjan, Peter, Gaković, Biljana M., Pantelić, Dejan, Trtica, Milan, Jelenković, Branislav, "Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions" in Optics and Laser Technology, 54 (2013):22-29,
https://doi.org/10.1016/j.optlastec.2013.04.030 . .
6
7
10

Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation

Petrović, Suzana; Salatić, Branislav; Peruško, Davor; Panjan, Matjaž; Čekada, Miha; Gaković, Biljana M.; Jelenković, Branislav; Trtica, Milan

(2012)

TY  - JOUR
AU  - Petrović, Suzana
AU  - Salatić, Branislav
AU  - Peruško, Davor
AU  - Panjan, Matjaž
AU  - Čekada, Miha
AU  - Gaković, Biljana M.
AU  - Jelenković, Branislav
AU  - Trtica, Milan
PY  - 2012
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6956
AB  - A study of the effects of laser irradiation on the morphology and structure of Al/Ti and Ni/Ti multilayers is reported in this paper. Multilayers of Al/Ti and Ni/Ti were deposited by dc ion sputtering on Si(100) substrates in a single vacuum run. Laser processing was done by a focused Er, Yb, Cr glass laser beam at a wavelength of 1540 nm, a pulse duration of 40 ns and fluence in the range 8.5-23.8 J cm(-2). Surface changes can be summarized as follows: (i) the intensive removal of surface material with crater-like characteristics, (ii) the appearance of hydrodynamic features (such as resolidified droplets) and (iii) the sporadic appearance of cracking. Changes in the (Ni/Ti)/Si system included modification of the Si substrate with the formation of polygonal-mosaic structures and the appearance of hydrodynamic features in the form of nano-globules. The rate of ablation increased with energy density, whereas the rate of ablation for the (Ni/Ti)/Si system (similar to 11 x 10(3) mu m(3) per pulse) was higher than that for the (Al/Ti)/Si system (similar to 7 x 10(3) mu m(3) per pulse).
T2  - Physica Scripta
T1  - Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation
VL  - T149
DO  - 10.1088/0031-8949/2012/T149/014082
ER  - 
@article{
author = "Petrović, Suzana and Salatić, Branislav and Peruško, Davor and Panjan, Matjaž and Čekada, Miha and Gaković, Biljana M. and Jelenković, Branislav and Trtica, Milan",
year = "2012",
abstract = "A study of the effects of laser irradiation on the morphology and structure of Al/Ti and Ni/Ti multilayers is reported in this paper. Multilayers of Al/Ti and Ni/Ti were deposited by dc ion sputtering on Si(100) substrates in a single vacuum run. Laser processing was done by a focused Er, Yb, Cr glass laser beam at a wavelength of 1540 nm, a pulse duration of 40 ns and fluence in the range 8.5-23.8 J cm(-2). Surface changes can be summarized as follows: (i) the intensive removal of surface material with crater-like characteristics, (ii) the appearance of hydrodynamic features (such as resolidified droplets) and (iii) the sporadic appearance of cracking. Changes in the (Ni/Ti)/Si system included modification of the Si substrate with the formation of polygonal-mosaic structures and the appearance of hydrodynamic features in the form of nano-globules. The rate of ablation increased with energy density, whereas the rate of ablation for the (Ni/Ti)/Si system (similar to 11 x 10(3) mu m(3) per pulse) was higher than that for the (Al/Ti)/Si system (similar to 7 x 10(3) mu m(3) per pulse).",
journal = "Physica Scripta",
title = "Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation",
volume = "T149",
doi = "10.1088/0031-8949/2012/T149/014082"
}
Petrović, S., Salatić, B., Peruško, D., Panjan, M., Čekada, M., Gaković, B. M., Jelenković, B.,& Trtica, M.. (2012). Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation. in Physica Scripta, T149.
https://doi.org/10.1088/0031-8949/2012/T149/014082
Petrović S, Salatić B, Peruško D, Panjan M, Čekada M, Gaković BM, Jelenković B, Trtica M. Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation. in Physica Scripta. 2012;T149.
doi:10.1088/0031-8949/2012/T149/014082 .
Petrović, Suzana, Salatić, Branislav, Peruško, Davor, Panjan, Matjaž, Čekada, Miha, Gaković, Biljana M., Jelenković, Branislav, Trtica, Milan, "Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation" in Physica Scripta, T149 (2012),
https://doi.org/10.1088/0031-8949/2012/T149/014082 . .
1
1
2