Tomić, Nataša

Link to this page

Authority KeyName Variants
orcid::0000-0002-1799-1571
  • Tomić, Nataša (6)

Author's Bibliography

The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer

Marinković, Aleksandar; Vuksanović, Marija M.; Karić, Nataša; Đokić, Veljko; Popović, Mina; Jančić-Heinemann, Radmila; Tomić, Nataša

TY  - JOUR
AU  - Marinković, Aleksandar
AU  - Vuksanović, Marija M.
AU  - Karić, Nataša
AU  - Đokić, Veljko
AU  - Popović, Mina
AU  - Jančić-Heinemann, Radmila
AU  - Tomić, Nataša
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9761
AB  - As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based material. Hydrophobically modified starch prepared using natural-based plasticizers/modifiers in a first step ([-]-diisopropyl D-tartrate [DiPT], ricinoleic acid [RA] and epoxidized soybean oil [ESO]), and maleated polypropylene (MAPP) in a second step contributed to better compatibility, and thus reinforcing of composites. Tailored processing conditions, structural/morphological properties, hydrophobicity, and water-resistance of the modified starch were established. In addition, the Charpy impact and tensile strength of composites, based on poly(ethylene-co-acrylic acid) (EAA) and modified starches, were determined. Increased tensile strength and Young modulus of the composite using starch-modified with DiPT-MAPP, that is, 3 and 83%, respectively, indicated the possible applicability of obtained materials.
T2  - Polymer Composites
T1  - The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer
DO  - 10.1002/pc.25903
ER  - 
@article{
author = "Marinković, Aleksandar and Vuksanović, Marija M. and Karić, Nataša and Đokić, Veljko and Popović, Mina and Jančić-Heinemann, Radmila and Tomić, Nataša",
abstract = "As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based material. Hydrophobically modified starch prepared using natural-based plasticizers/modifiers in a first step ([-]-diisopropyl D-tartrate [DiPT], ricinoleic acid [RA] and epoxidized soybean oil [ESO]), and maleated polypropylene (MAPP) in a second step contributed to better compatibility, and thus reinforcing of composites. Tailored processing conditions, structural/morphological properties, hydrophobicity, and water-resistance of the modified starch were established. In addition, the Charpy impact and tensile strength of composites, based on poly(ethylene-co-acrylic acid) (EAA) and modified starches, were determined. Increased tensile strength and Young modulus of the composite using starch-modified with DiPT-MAPP, that is, 3 and 83%, respectively, indicated the possible applicability of obtained materials.",
journal = "Polymer Composites",
title = "The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer",
doi = "10.1002/pc.25903"
}
Marinković, A., Vuksanović, M. M., Karić, N., Đokić, V., Popović, M., Jančić-Heinemann, R.,& Tomić, N..The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer. in Polymer Composites.
https://doi.org/10.1002/pc.25903
Marinković A, Vuksanović MM, Karić N, Đokić V, Popović M, Jančić-Heinemann R, Tomić N. The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer. in Polymer Composites..
doi:10.1002/pc.25903 .
Marinković, Aleksandar, Vuksanović, Marija M., Karić, Nataša, Đokić, Veljko, Popović, Mina, Jančić-Heinemann, Radmila, Tomić, Nataša, "The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer" in Polymer Composites,
https://doi.org/10.1002/pc.25903 . .
1
1
1

Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route

Tomić, Nataša; Grujić-Brojčin, Mirjana; Finčur, Nina L.; Abramović, Biljana F.; Simović, Bojana; Krstić, Jugoslav B.; Matović, Branko; Šćepanović, Maja

(Elsevier, 2015)

TY  - JOUR
AU  - Tomić, Nataša
AU  - Grujić-Brojčin, Mirjana
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Simović, Bojana
AU  - Krstić, Jugoslav B.
AU  - Matović, Branko
AU  - Šćepanović, Maja
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/821
AB  - Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route
VL  - 163
SP  - 518
EP  - 528
DO  - 10.1016/j.matchemphys.2015.08.008
ER  - 
@article{
author = "Tomić, Nataša and Grujić-Brojčin, Mirjana and Finčur, Nina L. and Abramović, Biljana F. and Simović, Bojana and Krstić, Jugoslav B. and Matović, Branko and Šćepanović, Maja",
year = "2015",
abstract = "Two series of nanocrystalline brookite-type powders have been synthesized by using combined sal gel hydrothermal method with titanium tetrachloride (TiCI4) as a precursor and hydrothermal temperature and reaction time varied in the range of 120-200 degrees C and 12-48 h, respectively. The effects of chosen synthesis parameters on structural, morphological and optical properties of synthesized powders have been investigated by the XRPD, SEM, EDS and BET measurements, as well Raman spectroscopy and spectroscopic ellipsometry. The XRPD results have shown that pure brookite phase, with mean crystallite size of -33 nm, has been obtained only in the sample synthesized at 200 degrees C, after 24 h of hydrothermal process. In all other samples anatase phase also appears, whereas rutile and sodium titanate phases have been noticed in the samples synthesized at lower temperatures. The presence of different titania phases has also been confirmed and analyzed by Raman scattering measurements. The SEM measurements have shown spindle-like particles in brookite-rich samples synthesized at 200 degrees C, whereas BET measurements have detected mesoporous structure in these samples. The properties of synthesized powders have been correlated to their photocatalytic efficiency, tested in degradation of alprazolam, one of the 5th generation benzodiazepines. The sample consisted of pure brookite has shown the highest efficiency in the photodegradation of alprazolam, practically equal to the activity of Degussa P25. (C) 2015 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route",
volume = "163",
pages = "518-528",
doi = "10.1016/j.matchemphys.2015.08.008"
}
Tomić, N., Grujić-Brojčin, M., Finčur, N. L., Abramović, B. F., Simović, B., Krstić, J. B., Matović, B.,& Šćepanović, M.. (2015). Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics
Elsevier., 163, 518-528.
https://doi.org/10.1016/j.matchemphys.2015.08.008
Tomić N, Grujić-Brojčin M, Finčur NL, Abramović BF, Simović B, Krstić JB, Matović B, Šćepanović M. Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route. in Materials Chemistry and Physics. 2015;163:518-528.
doi:10.1016/j.matchemphys.2015.08.008 .
Tomić, Nataša, Grujić-Brojčin, Mirjana, Finčur, Nina L., Abramović, Biljana F., Simović, Bojana, Krstić, Jugoslav B., Matović, Branko, Šćepanović, Maja, "Photocatalytic degradation of alprazolam in water suspension of brookite type TiO2 nanopowders prepared using hydrothermal route" in Materials Chemistry and Physics, 163 (2015):518-528,
https://doi.org/10.1016/j.matchemphys.2015.08.008 . .
28
30
30

Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals

Radović, Marko B.; Dohcevic-Mitrovic, Z.; Paunović, Novica M.; Bošković, Snežana B.; Tomić, Nataša; Tadić, Nenad; Belca, I.

(2015)

TY  - JOUR
AU  - Radović, Marko B.
AU  - Dohcevic-Mitrovic, Z.
AU  - Paunović, Novica M.
AU  - Bošković, Snežana B.
AU  - Tomić, Nataša
AU  - Tadić, Nenad
AU  - Belca, I.
PY  - 2015
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/379
AB  - Plasmon-longitudinal-optical (LO) phonon interaction in pure and Nd-doped CeO2-y nanocrystals was investigated by measuring far-infrared reflectivity spectra in the 100-700 cm(-1) spectral range at room temperature. Analysis of the obtained results revealed that the presence of free charge carriers becomes significant with the particle size decrease to nanometer range and increase of lattice defects. The free charge carriers were found to be responsible for a plasmon mode which coupled strongly with two LO phonon modes of ceria. The presence of more pronounced low-frequency Drude tail and the screening of the phonon modes in Nd-doped CeO2-y nanocrystals implied that the Plasmon-LO phonon interaction increased with doping. Factorized and additive dielectric function models were applied to deduce about the coupled and decoupled LO phonon frequencies and the structure of the decoupled plasmon mode in pure and Nd-doped CeO2-y nanocrystals. These models were combined with Bruggeman effective medium approximation in order to properly describe the influence of porosity on the infrared reflectivity spectra. With increasing dopant content, the decoupled plasmon mode exhibited redshift and damping decrease implying that doping induced semiconductor-to-metalic state transition took place.
T2  - Journal of Physics. D: Applied Physics
T1  - Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals
VL  - 48
IS  - 6
DO  - 10.1088/0022-3727/48/6/065301
ER  - 
@article{
author = "Radović, Marko B. and Dohcevic-Mitrovic, Z. and Paunović, Novica M. and Bošković, Snežana B. and Tomić, Nataša and Tadić, Nenad and Belca, I.",
year = "2015",
abstract = "Plasmon-longitudinal-optical (LO) phonon interaction in pure and Nd-doped CeO2-y nanocrystals was investigated by measuring far-infrared reflectivity spectra in the 100-700 cm(-1) spectral range at room temperature. Analysis of the obtained results revealed that the presence of free charge carriers becomes significant with the particle size decrease to nanometer range and increase of lattice defects. The free charge carriers were found to be responsible for a plasmon mode which coupled strongly with two LO phonon modes of ceria. The presence of more pronounced low-frequency Drude tail and the screening of the phonon modes in Nd-doped CeO2-y nanocrystals implied that the Plasmon-LO phonon interaction increased with doping. Factorized and additive dielectric function models were applied to deduce about the coupled and decoupled LO phonon frequencies and the structure of the decoupled plasmon mode in pure and Nd-doped CeO2-y nanocrystals. These models were combined with Bruggeman effective medium approximation in order to properly describe the influence of porosity on the infrared reflectivity spectra. With increasing dopant content, the decoupled plasmon mode exhibited redshift and damping decrease implying that doping induced semiconductor-to-metalic state transition took place.",
journal = "Journal of Physics. D: Applied Physics",
title = "Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals",
volume = "48",
number = "6",
doi = "10.1088/0022-3727/48/6/065301"
}
Radović, M. B., Dohcevic-Mitrovic, Z., Paunović, N. M., Bošković, S. B., Tomić, N., Tadić, N.,& Belca, I.. (2015). Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals. in Journal of Physics. D: Applied Physics, 48(6).
https://doi.org/10.1088/0022-3727/48/6/065301
Radović MB, Dohcevic-Mitrovic Z, Paunović NM, Bošković SB, Tomić N, Tadić N, Belca I. Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals. in Journal of Physics. D: Applied Physics. 2015;48(6).
doi:10.1088/0022-3727/48/6/065301 .
Radović, Marko B., Dohcevic-Mitrovic, Z., Paunović, Novica M., Bošković, Snežana B., Tomić, Nataša, Tadić, Nenad, Belca, I., "Infrared study of plasmon-phonon coupling in pure and Nd-doped CeO2-y nanocrystals" in Journal of Physics. D: Applied Physics, 48, no. 6 (2015),
https://doi.org/10.1088/0022-3727/48/6/065301 . .
4
4
4

Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry

Radović, Marko B.; Stojadinovic, Bojan; Tomić, Nataša; Golubović, Aleksandar V.; Matović, Branko; Veljkovic, Ivana; Dohčević-Mitrović, Zorana

(2014)

TY  - JOUR
AU  - Radović, Marko B.
AU  - Stojadinovic, Bojan
AU  - Tomić, Nataša
AU  - Golubović, Aleksandar V.
AU  - Matović, Branko
AU  - Veljkovic, Ivana
AU  - Dohčević-Mitrović, Zorana 
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/308
AB  - Synthesis process strongly influences the nanocrystalline CeO2-y defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO2-y samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO2-y samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO2-y nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO2-y nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F+ and F-0) can be formed in the CeO2-y nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals. (C) 2014 AIP Publishing LLC.
T2  - Journal of Applied Physics
T1  - Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry
VL  - 116
IS  - 23
DO  - 10.1063/1.4904516
ER  - 
@article{
author = "Radović, Marko B. and Stojadinovic, Bojan and Tomić, Nataša and Golubović, Aleksandar V. and Matović, Branko and Veljkovic, Ivana and Dohčević-Mitrović, Zorana ",
year = "2014",
abstract = "Synthesis process strongly influences the nanocrystalline CeO2-y defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO2-y samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO2-y samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO2-y nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO2-y nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F+ and F-0) can be formed in the CeO2-y nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals. (C) 2014 AIP Publishing LLC.",
journal = "Journal of Applied Physics",
title = "Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry",
volume = "116",
number = "23",
doi = "10.1063/1.4904516"
}
Radović, M. B., Stojadinovic, B., Tomić, N., Golubović, A. V., Matović, B., Veljkovic, I.,& Dohčević-Mitrović, Z.. (2014). Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry. in Journal of Applied Physics, 116(23).
https://doi.org/10.1063/1.4904516
Radović MB, Stojadinovic B, Tomić N, Golubović AV, Matović B, Veljkovic I, Dohčević-Mitrović Z. Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry. in Journal of Applied Physics. 2014;116(23).
doi:10.1063/1.4904516 .
Radović, Marko B., Stojadinovic, Bojan, Tomić, Nataša, Golubović, Aleksandar V., Matović, Branko, Veljkovic, Ivana, Dohčević-Mitrović, Zorana , "Investigation of surface defect states in CeO2-y nanocrystals by Scanning-tunneling microscopy/spectroscopy and ellipsometry" in Journal of Applied Physics, 116, no. 23 (2014),
https://doi.org/10.1063/1.4904516 . .
7
7
7

Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam

Golubović, Aleksandar V.; Tomić, Nataša; Finčur, Nina L.; Abramović, Biljana F.; Veljkovic, I.; Zdravkovic, J.; Grujić-Brojčin, Mirjana; Babić, Biljana M.; Stojadinovic, B.; Šćepanović, Maja

(2014)

TY  - JOUR
AU  - Golubović, Aleksandar V.
AU  - Tomić, Nataša
AU  - Finčur, Nina L.
AU  - Abramović, Biljana F.
AU  - Veljkovic, I.
AU  - Zdravkovic, J.
AU  - Grujić-Brojčin, Mirjana
AU  - Babić, Biljana M.
AU  - Stojadinovic, B.
AU  - Šćepanović, Maja
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/127
AB  - Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
T2  - Ceramics International
T1  - Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam
VL  - 40
IS  - 8
SP  - 13409
EP  - 13418
DO  - 10.1016/j.ceramint.2014.05.060
ER  - 
@article{
author = "Golubović, Aleksandar V. and Tomić, Nataša and Finčur, Nina L. and Abramović, Biljana F. and Veljkovic, I. and Zdravkovic, J. and Grujić-Brojčin, Mirjana and Babić, Biljana M. and Stojadinovic, B. and Šćepanović, Maja",
year = "2014",
abstract = "Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both methods were the same, up to the last part of synthesis (the transformation from the mother liquor to oxide nanopowders), in order to find the influence of applied methods on the properties of nanopowders. XRD results have shown that all synthesized nanopowders were in the anatase phase. It was seen from DSC measurements that anatase to rutile phase transition took place at a higher temperature with a higher concentration of dopant (La3+). The samples obtained by the sol gel method had a higher temperature of phase transition than related samples obtained by the hydrothermal method. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the pharmaceutical alprazolam. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.",
journal = "Ceramics International",
title = "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam",
volume = "40",
number = "8",
pages = "13409-13418",
doi = "10.1016/j.ceramint.2014.05.060"
}
Golubović, A. V., Tomić, N., Finčur, N. L., Abramović, B. F., Veljkovic, I., Zdravkovic, J., Grujić-Brojčin, M., Babić, B. M., Stojadinovic, B.,& Šćepanović, M.. (2014). Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International, 40(8), 13409-13418.
https://doi.org/10.1016/j.ceramint.2014.05.060
Golubović AV, Tomić N, Finčur NL, Abramović BF, Veljkovic I, Zdravkovic J, Grujić-Brojčin M, Babić BM, Stojadinovic B, Šćepanović M. Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam. in Ceramics International. 2014;40(8):13409-13418.
doi:10.1016/j.ceramint.2014.05.060 .
Golubović, Aleksandar V., Tomić, Nataša, Finčur, Nina L., Abramović, Biljana F., Veljkovic, I., Zdravkovic, J., Grujić-Brojčin, Mirjana, Babić, Biljana M., Stojadinovic, B., Šćepanović, Maja, "Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam" in Ceramics International, 40, no. 8 (2014):13409-13418,
https://doi.org/10.1016/j.ceramint.2014.05.060 . .
9
9
9

Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping

Grujić-Brojčin, Mirjana; Armaković, Sanja J.; Tomić, Nataša; Abramović, Biljana F.; Golubavic, A.; Stojadinovic, B.; Kremenović, Aleksandar S.; Babić, Biljana M.; Dohcevic-Mitrovic, Z.; Šćepanović, Maja

(2014)

TY  - JOUR
AU  - Grujić-Brojčin, Mirjana
AU  - Armaković, Sanja J.
AU  - Tomić, Nataša
AU  - Abramović, Biljana F.
AU  - Golubavic, A.
AU  - Stojadinovic, B.
AU  - Kremenović, Aleksandar S.
AU  - Babić, Biljana M.
AU  - Dohcevic-Mitrovic, Z.
AU  - Šćepanović, Maja
PY  - 2014
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/5881
AB  - The influence of La-doping in the range of 0.5-6.0 mol% on structural and morphological properties of TiO2 nanopowders synthesized by sol-gel routine has been investigated by XRPD, AFM, EDS and BET measurements, as well as Raman spectroscopy. The XRPD and Raman measurements have revealed the anatase phase as dominant in all nanopowders, with crystallite size decreasing from similar to 15 nm in pure TiO2 to similar to 12 nm in La-doped samples. The BET data suggest that all samples are fully mesoporous, with mean pore diameters in the range of similar to 6-8 nm. The specific surface area and the complexity of pore structure are greater in doped samples than in pure TiO2 sample. The spectroscopic ellipsometry has apparently shown that the band gap has been gradually increased with the increase of La content. The STM and STS techniques have been used successfully to evaluate the surface morphology and electronic properties of La-doped nanopowders. All investigated properties have been related to photocatalytic activity, tested in degradation of a metoprolol tartrate salt (0.05 mM), and induced by UV-radiation. All doped samples showed increased photocatalytic activity compared to pure TiO2, among which the 0.65 mol% La-doped sample appeared to be the most efficient. (C) 2013 Elsevier Inc. All rights reserved.
T2  - Materials Characterization
T1  - Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping
VL  - 88
SP  - 30
EP  - 41
DO  - 10.1016/j.matchar.2013.12.002
ER  - 
@article{
author = "Grujić-Brojčin, Mirjana and Armaković, Sanja J. and Tomić, Nataša and Abramović, Biljana F. and Golubavic, A. and Stojadinovic, B. and Kremenović, Aleksandar S. and Babić, Biljana M. and Dohcevic-Mitrovic, Z. and Šćepanović, Maja",
year = "2014",
abstract = "The influence of La-doping in the range of 0.5-6.0 mol% on structural and morphological properties of TiO2 nanopowders synthesized by sol-gel routine has been investigated by XRPD, AFM, EDS and BET measurements, as well as Raman spectroscopy. The XRPD and Raman measurements have revealed the anatase phase as dominant in all nanopowders, with crystallite size decreasing from similar to 15 nm in pure TiO2 to similar to 12 nm in La-doped samples. The BET data suggest that all samples are fully mesoporous, with mean pore diameters in the range of similar to 6-8 nm. The specific surface area and the complexity of pore structure are greater in doped samples than in pure TiO2 sample. The spectroscopic ellipsometry has apparently shown that the band gap has been gradually increased with the increase of La content. The STM and STS techniques have been used successfully to evaluate the surface morphology and electronic properties of La-doped nanopowders. All investigated properties have been related to photocatalytic activity, tested in degradation of a metoprolol tartrate salt (0.05 mM), and induced by UV-radiation. All doped samples showed increased photocatalytic activity compared to pure TiO2, among which the 0.65 mol% La-doped sample appeared to be the most efficient. (C) 2013 Elsevier Inc. All rights reserved.",
journal = "Materials Characterization",
title = "Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping",
volume = "88",
pages = "30-41",
doi = "10.1016/j.matchar.2013.12.002"
}
Grujić-Brojčin, M., Armaković, S. J., Tomić, N., Abramović, B. F., Golubavic, A., Stojadinovic, B., Kremenović, A. S., Babić, B. M., Dohcevic-Mitrovic, Z.,& Šćepanović, M.. (2014). Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping. in Materials Characterization, 88, 30-41.
https://doi.org/10.1016/j.matchar.2013.12.002
Grujić-Brojčin M, Armaković SJ, Tomić N, Abramović BF, Golubavic A, Stojadinovic B, Kremenović AS, Babić BM, Dohcevic-Mitrovic Z, Šćepanović M. Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping. in Materials Characterization. 2014;88:30-41.
doi:10.1016/j.matchar.2013.12.002 .
Grujić-Brojčin, Mirjana, Armaković, Sanja J., Tomić, Nataša, Abramović, Biljana F., Golubavic, A., Stojadinovic, B., Kremenović, Aleksandar S., Babić, Biljana M., Dohcevic-Mitrovic, Z., Šćepanović, Maja, "Surface modification of sol-gel synthesized TiO2 nanoparticles induced by La-doping" in Materials Characterization, 88 (2014):30-41,
https://doi.org/10.1016/j.matchar.2013.12.002 . .
38
34
39