Petković, Darija

Link to this page

Authority KeyName Variants
orcid::0000-0001-5752-5367
  • Petković, Darija (7)
Projects
No records found.

Author's Bibliography

Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles

Jovanović, Sonja; Rmuš Mravik, Jelena; Grujičić, Marija; Petković, Darija; Pejčić, Milica; Jovanović, Zoran

(Belgrade : Materials Research Society of Serbia, 2023)

TY  - CONF
AU  - Jovanović, Sonja
AU  - Rmuš Mravik, Jelena
AU  - Grujičić, Marija
AU  - Petković, Darija
AU  - Pejčić, Milica
AU  - Jovanović, Zoran
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11659
AB  - In the past two decades spinel ferrites nanoparticles have been extensively investigated due to their potential applications in a variety of fields (data storage, catalysis, energy, environment, biomedicine, etc.). In the present work, zinc ferrite nanoparticles with different copper content (Zn(1-x)CuxFe2O4; x=0, 0.2, 0.4, 0.6, and 0.8) but with the same particle size distribution and amount of oleic acid as capping agent were prepared by solvothermal synthesis and the physicochemical properties of as-prepared samples were investigated. The prepared samples were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry (VSM). The XRD results show that all the diffraction maxima correspond to the cubic spinel structure, while TEM images reviled that samples are consisted of sphere-like particles, 5-7 nm in size. The presence of oleic acid on the surface of nanoparticles was confirmed by FTIR analysis. The magnetic measurements revealed superparamagnetic behavior of obtained powders, with gradual increase of saturation magnetization.
PB  - Belgrade : Materials Research Society of Serbia
C3  - YUCOMAT 2023 : 24th Annual Conference YUCOMAT 2023 : programme and the book of abstracts; September 4-8, 2023; Herceg Novi, Montenegro
T1  - Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles
SP  - 157
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11659
ER  - 
@conference{
author = "Jovanović, Sonja and Rmuš Mravik, Jelena and Grujičić, Marija and Petković, Darija and Pejčić, Milica and Jovanović, Zoran",
year = "2023",
abstract = "In the past two decades spinel ferrites nanoparticles have been extensively investigated due to their potential applications in a variety of fields (data storage, catalysis, energy, environment, biomedicine, etc.). In the present work, zinc ferrite nanoparticles with different copper content (Zn(1-x)CuxFe2O4; x=0, 0.2, 0.4, 0.6, and 0.8) but with the same particle size distribution and amount of oleic acid as capping agent were prepared by solvothermal synthesis and the physicochemical properties of as-prepared samples were investigated. The prepared samples were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry (VSM). The XRD results show that all the diffraction maxima correspond to the cubic spinel structure, while TEM images reviled that samples are consisted of sphere-like particles, 5-7 nm in size. The presence of oleic acid on the surface of nanoparticles was confirmed by FTIR analysis. The magnetic measurements revealed superparamagnetic behavior of obtained powders, with gradual increase of saturation magnetization.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "YUCOMAT 2023 : 24th Annual Conference YUCOMAT 2023 : programme and the book of abstracts; September 4-8, 2023; Herceg Novi, Montenegro",
title = "Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles",
pages = "157",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11659"
}
Jovanović, S., Rmuš Mravik, J., Grujičić, M., Petković, D., Pejčić, M.,& Jovanović, Z.. (2023). Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles. in YUCOMAT 2023 : 24th Annual Conference YUCOMAT 2023 : programme and the book of abstracts; September 4-8, 2023; Herceg Novi, Montenegro
Belgrade : Materials Research Society of Serbia., 157.
https://hdl.handle.net/21.15107/rcub_vinar_11659
Jovanović S, Rmuš Mravik J, Grujičić M, Petković D, Pejčić M, Jovanović Z. Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles. in YUCOMAT 2023 : 24th Annual Conference YUCOMAT 2023 : programme and the book of abstracts; September 4-8, 2023; Herceg Novi, Montenegro. 2023;:157.
https://hdl.handle.net/21.15107/rcub_vinar_11659 .
Jovanović, Sonja, Rmuš Mravik, Jelena, Grujičić, Marija, Petković, Darija, Pejčić, Milica, Jovanović, Zoran, "Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles" in YUCOMAT 2023 : 24th Annual Conference YUCOMAT 2023 : programme and the book of abstracts; September 4-8, 2023; Herceg Novi, Montenegro (2023):157,
https://hdl.handle.net/21.15107/rcub_vinar_11659 .

Sinteza i modifikacija naprednih nanomaterijala - pogled kroz prizmu obnovljivih izvora energije

Jovanović, Zoran; Jovanović, Sonja; Mravik, Željko; Rmuš, Jelena; Jelić, Marko; Pejčić, Milica; Grujičić, Marija; Petković, Darija

(2023)

TY  - CONF
AU  - Jovanović, Zoran
AU  - Jovanović, Sonja
AU  - Mravik, Željko
AU  - Rmuš, Jelena
AU  - Jelić, Marko
AU  - Pejčić, Milica
AU  - Grujičić, Marija
AU  - Petković, Darija
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12334
AB  - Elektrohemijska istraživanja su prethodnih godina dala ključni podstrek globalnim stremljenjima ka obnovljivim izvorima energije. Višegeneracijski napori, u početku motivisani željom za fundamentalnim razumevanjem procesa, aktuelizovani su očekivanim nedostatkom fosilnih goriva i pratećim nepovoljnim uticajem na životnu sredinu. Nanomaterijali su omogućili spektakularan skok u tehnološkim inovacijama i neosporan je njihov doprinos obnovljivim izvorima energije. Zahvaljujući novim svojstvima nanomaterijala i njihovoj sinergiji, omogućeno je dalje unapređenje i integracija različitih funkcionalnosti. Pri tome, postalo je jasno da atomski precizan dizajn materijala postaje kritičan za razvoj naprava sledeće generacije. Ovo je posebno važno u slučaju nanokompozita gde interakcija komponenti pojačava moguće sinergijske doprinose. U izlaganju će biti dat osvrt na napredne metode sinteze i modifikacije materijala – od tradicionalnih, do tankih filmova, 0D i 2D nanomaterijala i njihovih kompozita – posmatranih kroz prizmu obnovljivih izvora energije i održivosti (elektrohemijski superkondenzatori, razgradnja vode, senzori, i dr.). Razvoj novih materijala i unapređenje elektrohemijskih sistema ima potencijal da suštinski učini obnovljivu energiju održivijom i dostupnijom, time otvarajući put ka održivoj budućnosti.
C3  - Savremena stremljenja u elektrohemiji u proceu prelaska na obnovljive izvore energije: Naučni skup posvećen 100 - godišnjici rođenja inostranog člana SANU Dž. O'M. Bokrisa : Knjiga izvoda
T1  - Sinteza i modifikacija naprednih nanomaterijala - pogled kroz prizmu obnovljivih izvora energije
SP  - 19
EP  - 19
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12334
ER  - 
@conference{
author = "Jovanović, Zoran and Jovanović, Sonja and Mravik, Željko and Rmuš, Jelena and Jelić, Marko and Pejčić, Milica and Grujičić, Marija and Petković, Darija",
year = "2023",
abstract = "Elektrohemijska istraživanja su prethodnih godina dala ključni podstrek globalnim stremljenjima ka obnovljivim izvorima energije. Višegeneracijski napori, u početku motivisani željom za fundamentalnim razumevanjem procesa, aktuelizovani su očekivanim nedostatkom fosilnih goriva i pratećim nepovoljnim uticajem na životnu sredinu. Nanomaterijali su omogućili spektakularan skok u tehnološkim inovacijama i neosporan je njihov doprinos obnovljivim izvorima energije. Zahvaljujući novim svojstvima nanomaterijala i njihovoj sinergiji, omogućeno je dalje unapređenje i integracija različitih funkcionalnosti. Pri tome, postalo je jasno da atomski precizan dizajn materijala postaje kritičan za razvoj naprava sledeće generacije. Ovo je posebno važno u slučaju nanokompozita gde interakcija komponenti pojačava moguće sinergijske doprinose. U izlaganju će biti dat osvrt na napredne metode sinteze i modifikacije materijala – od tradicionalnih, do tankih filmova, 0D i 2D nanomaterijala i njihovih kompozita – posmatranih kroz prizmu obnovljivih izvora energije i održivosti (elektrohemijski superkondenzatori, razgradnja vode, senzori, i dr.). Razvoj novih materijala i unapređenje elektrohemijskih sistema ima potencijal da suštinski učini obnovljivu energiju održivijom i dostupnijom, time otvarajući put ka održivoj budućnosti.",
journal = "Savremena stremljenja u elektrohemiji u proceu prelaska na obnovljive izvore energije: Naučni skup posvećen 100 - godišnjici rođenja inostranog člana SANU Dž. O'M. Bokrisa : Knjiga izvoda",
title = "Sinteza i modifikacija naprednih nanomaterijala - pogled kroz prizmu obnovljivih izvora energije",
pages = "19-19",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12334"
}
Jovanović, Z., Jovanović, S., Mravik, Ž., Rmuš, J., Jelić, M., Pejčić, M., Grujičić, M.,& Petković, D.. (2023). Sinteza i modifikacija naprednih nanomaterijala - pogled kroz prizmu obnovljivih izvora energije. in Savremena stremljenja u elektrohemiji u proceu prelaska na obnovljive izvore energije: Naučni skup posvećen 100 - godišnjici rođenja inostranog člana SANU Dž. O'M. Bokrisa : Knjiga izvoda, 19-19.
https://hdl.handle.net/21.15107/rcub_vinar_12334
Jovanović Z, Jovanović S, Mravik Ž, Rmuš J, Jelić M, Pejčić M, Grujičić M, Petković D. Sinteza i modifikacija naprednih nanomaterijala - pogled kroz prizmu obnovljivih izvora energije. in Savremena stremljenja u elektrohemiji u proceu prelaska na obnovljive izvore energije: Naučni skup posvećen 100 - godišnjici rođenja inostranog člana SANU Dž. O'M. Bokrisa : Knjiga izvoda. 2023;:19-19.
https://hdl.handle.net/21.15107/rcub_vinar_12334 .
Jovanović, Zoran, Jovanović, Sonja, Mravik, Željko, Rmuš, Jelena, Jelić, Marko, Pejčić, Milica, Grujičić, Marija, Petković, Darija, "Sinteza i modifikacija naprednih nanomaterijala - pogled kroz prizmu obnovljivih izvora energije" in Savremena stremljenja u elektrohemiji u proceu prelaska na obnovljive izvore energije: Naučni skup posvećen 100 - godišnjici rođenja inostranog člana SANU Dž. O'M. Bokrisa : Knjiga izvoda (2023):19-19,
https://hdl.handle.net/21.15107/rcub_vinar_12334 .

Enhanced electrochemical detection of gallic acid using modified glassy carbon electrodes with Zn/Ga-dopped cobalt ferrite

Grujičić, Marija; Jelić, Marko; Stojković Simatović, Ivana; Bajuk Bogdanović, Danica; Petković, Darija; Jovanović, Zoran; Jovanović, Sonja

(Belgrade : Institute of Technical Sciences of SASA, 2023)

TY  - CONF
AU  - Grujičić, Marija
AU  - Jelić, Marko
AU  - Stojković Simatović, Ivana
AU  - Bajuk Bogdanović, Danica
AU  - Petković, Darija
AU  - Jovanović, Zoran
AU  - Jovanović, Sonja
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12317
AB  - In this study, solvothermally synthesized nanoparticles of cobalt ferrite (CoFe2O4, CFO) and Zn/Ga-dopped cobalt ferrite (Co0.5Zn0.5Fe2O4, CFO_Zn and CoFe1.5Ga0.5O4, CFO_Ga, respectively) with dihydrocaffeic acid (DHCA) as a surfactant were examined for electrochemical detection of gallic acid. Based on X-ray diffraction analysis, diffraction maxima of all samples correspond to the cubic spinel phase, while transmission electron microscopy showed that the nanoparticles are non-agglomerated, sphere-like with an average size of 5±1 nm. The presence of DHCA on the surface of nanoparticles was confirmed by Fourier Transform Infrared Spectroscopy (FTIR). For the purpose of electrochemical detection of gallic acid the modified glassy carbon electrode (m-GCE) was prepared from CFO, CFO_Zn and CFO_Ga nanoparticles. Initial tests have shown instability/disintegration of m-GCE in aqueous solutions, because of which samples were annealed at 450 °C in air. Cyclic voltammograms of all annealed samples showed good reversibility in the system [Fe(CN)6] 3-/4- . The most efficient electron transfer was achieved when the mass ratio between sample and Nafion® was 85:15, respectively. The best sensitivity to gallic acid (10-4 M, in Britton-Robinson buffer) was observed for CFO_Zn sample. Results are showing that by selective functionalization and surface modification of nanoparticles, it is possible to optimize the electrochemical properties suitable for sensing, which is the basis of this method and the goal of further research.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
T1  - Enhanced electrochemical detection of gallic acid using modified glassy carbon electrodes with Zn/Ga-dopped cobalt ferrite
SP  - 44
EP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12317
ER  - 
@conference{
author = "Grujičić, Marija and Jelić, Marko and Stojković Simatović, Ivana and Bajuk Bogdanović, Danica and Petković, Darija and Jovanović, Zoran and Jovanović, Sonja",
year = "2023",
abstract = "In this study, solvothermally synthesized nanoparticles of cobalt ferrite (CoFe2O4, CFO) and Zn/Ga-dopped cobalt ferrite (Co0.5Zn0.5Fe2O4, CFO_Zn and CoFe1.5Ga0.5O4, CFO_Ga, respectively) with dihydrocaffeic acid (DHCA) as a surfactant were examined for electrochemical detection of gallic acid. Based on X-ray diffraction analysis, diffraction maxima of all samples correspond to the cubic spinel phase, while transmission electron microscopy showed that the nanoparticles are non-agglomerated, sphere-like with an average size of 5±1 nm. The presence of DHCA on the surface of nanoparticles was confirmed by Fourier Transform Infrared Spectroscopy (FTIR). For the purpose of electrochemical detection of gallic acid the modified glassy carbon electrode (m-GCE) was prepared from CFO, CFO_Zn and CFO_Ga nanoparticles. Initial tests have shown instability/disintegration of m-GCE in aqueous solutions, because of which samples were annealed at 450 °C in air. Cyclic voltammograms of all annealed samples showed good reversibility in the system [Fe(CN)6] 3-/4- . The most efficient electron transfer was achieved when the mass ratio between sample and Nafion® was 85:15, respectively. The best sensitivity to gallic acid (10-4 M, in Britton-Robinson buffer) was observed for CFO_Zn sample. Results are showing that by selective functionalization and surface modification of nanoparticles, it is possible to optimize the electrochemical properties suitable for sensing, which is the basis of this method and the goal of further research.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts",
title = "Enhanced electrochemical detection of gallic acid using modified glassy carbon electrodes with Zn/Ga-dopped cobalt ferrite",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12317"
}
Grujičić, M., Jelić, M., Stojković Simatović, I., Bajuk Bogdanović, D., Petković, D., Jovanović, Z.,& Jovanović, S.. (2023). Enhanced electrochemical detection of gallic acid using modified glassy carbon electrodes with Zn/Ga-dopped cobalt ferrite. in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
Belgrade : Institute of Technical Sciences of SASA., 44-44.
https://hdl.handle.net/21.15107/rcub_vinar_12317
Grujičić M, Jelić M, Stojković Simatović I, Bajuk Bogdanović D, Petković D, Jovanović Z, Jovanović S. Enhanced electrochemical detection of gallic acid using modified glassy carbon electrodes with Zn/Ga-dopped cobalt ferrite. in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts. 2023;:44-44.
https://hdl.handle.net/21.15107/rcub_vinar_12317 .
Grujičić, Marija, Jelić, Marko, Stojković Simatović, Ivana, Bajuk Bogdanović, Danica, Petković, Darija, Jovanović, Zoran, Jovanović, Sonja, "Enhanced electrochemical detection of gallic acid using modified glassy carbon electrodes with Zn/Ga-dopped cobalt ferrite" in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts (2023):44-44,
https://hdl.handle.net/21.15107/rcub_vinar_12317 .

PLD growth of strontium titanate thin films on SrO-deoxidized and rGO-buffered Si(001) substrate

Petković, Darija; Chia-Ho, Hsin; Trstenjak, Urška; Kovač, Janez; Vengust, Damjan; Spreitzer, Matjaž; Jovanović, Zoran

(Belgrade : Institute of Technical Sciences of SASA, 2023)

TY  - CONF
AU  - Petković, Darija
AU  - Chia-Ho, Hsin
AU  - Trstenjak, Urška
AU  - Kovač, Janez
AU  - Vengust, Damjan
AU  - Spreitzer, Matjaž
AU  - Jovanović, Zoran
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12327
AB  - Epitaxy represents a process of crystal growth or material deposition in which the new created layers have a high degree of crystallographic alignment with the substrate lattice. In this research 10 nm-thick thin films of strontium titanate (STO) were grown using pulsed laser deposition (PLD) method on Si(001) whose surface was either deoxidized with strontium oxide (SrO) or buffered by reduced graphene oxide (rGO) in combination with SrO deoxidation. In addition to differently prepared Si(001) surface, the effect of deposition temperature on the crystalline structure of the STO thin films was also examined. Reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray reflectivity (XRR) and X-ray photoelectron spectroscopy (XPS) methods were used to examine the properties of the grown films. It was concluded that the STO thin film grown on the rGO-coated Si substrate at 515 °C shows the highest crystallinity with a smooth surface, while the film deposited on the bare silicon has amorphous structure. The STO films grown at 700 °C show textured or polycrystalline structure. Good crystallinity, epitaxial alignment, and clean interface are the major requirements for STO/Si and the STO/rGO/Si heterostructure for making an efficient and stable Si photocathode for the photoelectrochemical (PEC) water splitting. Our future work will be directed toward understanding how the obtained interfaces and crystalline structure of STO films are influencing the PEC process.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
T1  - PLD growth of strontium titanate thin films on SrO-deoxidized and rGO-buffered Si(001) substrate
SP  - 60
EP  - 60
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12327
ER  - 
@conference{
author = "Petković, Darija and Chia-Ho, Hsin and Trstenjak, Urška and Kovač, Janez and Vengust, Damjan and Spreitzer, Matjaž and Jovanović, Zoran",
year = "2023",
abstract = "Epitaxy represents a process of crystal growth or material deposition in which the new created layers have a high degree of crystallographic alignment with the substrate lattice. In this research 10 nm-thick thin films of strontium titanate (STO) were grown using pulsed laser deposition (PLD) method on Si(001) whose surface was either deoxidized with strontium oxide (SrO) or buffered by reduced graphene oxide (rGO) in combination with SrO deoxidation. In addition to differently prepared Si(001) surface, the effect of deposition temperature on the crystalline structure of the STO thin films was also examined. Reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray reflectivity (XRR) and X-ray photoelectron spectroscopy (XPS) methods were used to examine the properties of the grown films. It was concluded that the STO thin film grown on the rGO-coated Si substrate at 515 °C shows the highest crystallinity with a smooth surface, while the film deposited on the bare silicon has amorphous structure. The STO films grown at 700 °C show textured or polycrystalline structure. Good crystallinity, epitaxial alignment, and clean interface are the major requirements for STO/Si and the STO/rGO/Si heterostructure for making an efficient and stable Si photocathode for the photoelectrochemical (PEC) water splitting. Our future work will be directed toward understanding how the obtained interfaces and crystalline structure of STO films are influencing the PEC process.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts",
title = "PLD growth of strontium titanate thin films on SrO-deoxidized and rGO-buffered Si(001) substrate",
pages = "60-60",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12327"
}
Petković, D., Chia-Ho, H., Trstenjak, U., Kovač, J., Vengust, D., Spreitzer, M.,& Jovanović, Z.. (2023). PLD growth of strontium titanate thin films on SrO-deoxidized and rGO-buffered Si(001) substrate. in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
Belgrade : Institute of Technical Sciences of SASA., 60-60.
https://hdl.handle.net/21.15107/rcub_vinar_12327
Petković D, Chia-Ho H, Trstenjak U, Kovač J, Vengust D, Spreitzer M, Jovanović Z. PLD growth of strontium titanate thin films on SrO-deoxidized and rGO-buffered Si(001) substrate. in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts. 2023;:60-60.
https://hdl.handle.net/21.15107/rcub_vinar_12327 .
Petković, Darija, Chia-Ho, Hsin, Trstenjak, Urška, Kovač, Janez, Vengust, Damjan, Spreitzer, Matjaž, Jovanović, Zoran, "PLD growth of strontium titanate thin films on SrO-deoxidized and rGO-buffered Si(001) substrate" in 21st Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts (2023):60-60,
https://hdl.handle.net/21.15107/rcub_vinar_12327 .

PLD growth of strontium titanate thin films on silicon substrate for photoelectrochemical water-splitting

Petković, Darija; Chia-Ho, Hsin; Trstenjak, Urška; Kovač, Janez; Vengust, Damjan; Jovanović, Zoran; Spreitzer, Matjaž

(EU COST Action OPERA, 2023)

TY  - CONF
AU  - Petković, Darija
AU  - Chia-Ho, Hsin
AU  - Trstenjak, Urška
AU  - Kovač, Janez
AU  - Vengust, Damjan
AU  - Jovanović, Zoran
AU  - Spreitzer, Matjaž
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12333
AB  - Epitaxial films of metal oxides deposited on silicon substrates represent a new type of material that could be used as protective (or electroactive) layer in the photoelectrochemical water splitting. To understand the influence of crystalline and interfacial properties of oxide layer on the water splitting process a ~10 nm strontium titanate (STO) films have been grown using the PLD method on bare and reduced graphene oxide (rGO) buffered silicon substrate. Our approach relied on the oxide-silicon integration using combination of SrO-assisted deoxidation and controllable coverage of silicon surface with a mono- to threelayer of spin-coated GO. The STO films have been grown at 515 and 700 °C and various experimental techniques were used to examine the surface and crystalline properties of grown films (reflection high energy electron diffraction, atomic force microscopy, scanning electron microscopy, X-ray diffraction, X-ray reflectivity and X-ray photoelectron spectroscopy). The results show that the best the crystallinity of the STO thin films was obtained on rGO/SrO deoxidized silicon surface at 515 °C. Future studies will be devoted to electrochemical characterization of the grown films, that will help to establish clearer link on how the interface and crystalline parameters affect the water splitting process.
PB  - EU COST Action OPERA
C3  - Workshop “Application-oriented material development” : Book of abstracts
T1  - PLD growth of strontium titanate thin films on silicon substrate for photoelectrochemical water-splitting
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12333
ER  - 
@conference{
author = "Petković, Darija and Chia-Ho, Hsin and Trstenjak, Urška and Kovač, Janez and Vengust, Damjan and Jovanović, Zoran and Spreitzer, Matjaž",
year = "2023",
abstract = "Epitaxial films of metal oxides deposited on silicon substrates represent a new type of material that could be used as protective (or electroactive) layer in the photoelectrochemical water splitting. To understand the influence of crystalline and interfacial properties of oxide layer on the water splitting process a ~10 nm strontium titanate (STO) films have been grown using the PLD method on bare and reduced graphene oxide (rGO) buffered silicon substrate. Our approach relied on the oxide-silicon integration using combination of SrO-assisted deoxidation and controllable coverage of silicon surface with a mono- to threelayer of spin-coated GO. The STO films have been grown at 515 and 700 °C and various experimental techniques were used to examine the surface and crystalline properties of grown films (reflection high energy electron diffraction, atomic force microscopy, scanning electron microscopy, X-ray diffraction, X-ray reflectivity and X-ray photoelectron spectroscopy). The results show that the best the crystallinity of the STO thin films was obtained on rGO/SrO deoxidized silicon surface at 515 °C. Future studies will be devoted to electrochemical characterization of the grown films, that will help to establish clearer link on how the interface and crystalline parameters affect the water splitting process.",
publisher = "EU COST Action OPERA",
journal = "Workshop “Application-oriented material development” : Book of abstracts",
title = "PLD growth of strontium titanate thin films on silicon substrate for photoelectrochemical water-splitting",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12333"
}
Petković, D., Chia-Ho, H., Trstenjak, U., Kovač, J., Vengust, D., Jovanović, Z.,& Spreitzer, M.. (2023). PLD growth of strontium titanate thin films on silicon substrate for photoelectrochemical water-splitting. in Workshop “Application-oriented material development” : Book of abstracts
EU COST Action OPERA..
https://hdl.handle.net/21.15107/rcub_vinar_12333
Petković D, Chia-Ho H, Trstenjak U, Kovač J, Vengust D, Jovanović Z, Spreitzer M. PLD growth of strontium titanate thin films on silicon substrate for photoelectrochemical water-splitting. in Workshop “Application-oriented material development” : Book of abstracts. 2023;.
https://hdl.handle.net/21.15107/rcub_vinar_12333 .
Petković, Darija, Chia-Ho, Hsin, Trstenjak, Urška, Kovač, Janez, Vengust, Damjan, Jovanović, Zoran, Spreitzer, Matjaž, "PLD growth of strontium titanate thin films on silicon substrate for photoelectrochemical water-splitting" in Workshop “Application-oriented material development” : Book of abstracts (2023),
https://hdl.handle.net/21.15107/rcub_vinar_12333 .

Epitaxial growth of metal oxide thin films on semiconductors

Petković, Darija; Jovanović, Zoran

(Belgrade : Institute of Technical Sciences of SASA, 2022)

TY  - CONF
AU  - Petković, Darija
AU  - Jovanović, Zoran
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12335
AB  - Epitaxy represents a type of crystal growth or material deposition in which new crystalline layers are formed with one or more well-defined crystallographic orientations with respect to the seed layer. The epitaxy is usually implemented in the cases when new functionality is to be integrated with the already present platform. The two methods for the epitaxial growth of thin films i.e. pulsed laser deposition (PLD) and ion beam assisted deposition (IBAD) will be compared. We will highlight the most important aspects of the epitaxial growth of metal oxides (MO) on semiconductor (SC) substrates, including processes in the vapor phase and at the MO/SC interface. We will describe how the growth parameters (temperature, partial pressure, deposition rate, etc.) can affect the stoichiometry, morphology and overall crystalline structure and properties of the MO thin film. The important properties of MO and MO/SC interface will be also highlighted from the point of view of photoelectrochemical water splitting. Beside the growth parameters, the role of ion beam irradiation in tuning of physical and chemical properties of the MO and SC will be also discussed. The selection of appropriate characterization methods (surface and bulk) will be also highlighted for monitoring the growth of MO and the processes relevant in photoelectrochemical water splitting. An outline of the first experiments to be performed will be also presented.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - 20th Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
T1  - Epitaxial growth of metal oxide thin films on semiconductors
SP  - 68
EP  - 68
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12335
ER  - 
@conference{
author = "Petković, Darija and Jovanović, Zoran",
year = "2022",
abstract = "Epitaxy represents a type of crystal growth or material deposition in which new crystalline layers are formed with one or more well-defined crystallographic orientations with respect to the seed layer. The epitaxy is usually implemented in the cases when new functionality is to be integrated with the already present platform. The two methods for the epitaxial growth of thin films i.e. pulsed laser deposition (PLD) and ion beam assisted deposition (IBAD) will be compared. We will highlight the most important aspects of the epitaxial growth of metal oxides (MO) on semiconductor (SC) substrates, including processes in the vapor phase and at the MO/SC interface. We will describe how the growth parameters (temperature, partial pressure, deposition rate, etc.) can affect the stoichiometry, morphology and overall crystalline structure and properties of the MO thin film. The important properties of MO and MO/SC interface will be also highlighted from the point of view of photoelectrochemical water splitting. Beside the growth parameters, the role of ion beam irradiation in tuning of physical and chemical properties of the MO and SC will be also discussed. The selection of appropriate characterization methods (surface and bulk) will be also highlighted for monitoring the growth of MO and the processes relevant in photoelectrochemical water splitting. An outline of the first experiments to be performed will be also presented.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "20th Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts",
title = "Epitaxial growth of metal oxide thin films on semiconductors",
pages = "68-68",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12335"
}
Petković, D.,& Jovanović, Z.. (2022). Epitaxial growth of metal oxide thin films on semiconductors. in 20th Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts
Belgrade : Institute of Technical Sciences of SASA., 68-68.
https://hdl.handle.net/21.15107/rcub_vinar_12335
Petković D, Jovanović Z. Epitaxial growth of metal oxide thin films on semiconductors. in 20th Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts. 2022;:68-68.
https://hdl.handle.net/21.15107/rcub_vinar_12335 .
Petković, Darija, Jovanović, Zoran, "Epitaxial growth of metal oxide thin films on semiconductors" in 20th Young Researchers' Conference Materials Sciences and Engineering : program and the book of abstracts (2022):68-68,
https://hdl.handle.net/21.15107/rcub_vinar_12335 .

Linear and non-linear methods applied to fitting non-isothermal kinetic curves of dehydration of PAAG hydrogel swollen to equilibrium and non-equilibrium state

Petković, Darija; Adnađević, Borivoje; Jovanović, Jelena

(Russia, Dubna : Joint Institute for Nuclear Research, 2022)

TY  - CONF
AU  - Petković, Darija
AU  - Adnađević, Borivoje
AU  - Jovanović, Jelena
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/12347
PB  - Russia, Dubna : Joint Institute for Nuclear Research
C3  - AYSS-2022 : The XXVI International Scientific Conference of Young Scientists and Specialists
T1  - Linear and non-linear methods applied to fitting non-isothermal kinetic curves of dehydration of PAAG hydrogel swollen to equilibrium and non-equilibrium state
SP  - 190
EP  - 190
UR  - https://hdl.handle.net/21.15107/rcub_vinar_12347
ER  - 
@conference{
author = "Petković, Darija and Adnađević, Borivoje and Jovanović, Jelena",
year = "2022",
publisher = "Russia, Dubna : Joint Institute for Nuclear Research",
journal = "AYSS-2022 : The XXVI International Scientific Conference of Young Scientists and Specialists",
title = "Linear and non-linear methods applied to fitting non-isothermal kinetic curves of dehydration of PAAG hydrogel swollen to equilibrium and non-equilibrium state",
pages = "190-190",
url = "https://hdl.handle.net/21.15107/rcub_vinar_12347"
}
Petković, D., Adnađević, B.,& Jovanović, J.. (2022). Linear and non-linear methods applied to fitting non-isothermal kinetic curves of dehydration of PAAG hydrogel swollen to equilibrium and non-equilibrium state. in AYSS-2022 : The XXVI International Scientific Conference of Young Scientists and Specialists
Russia, Dubna : Joint Institute for Nuclear Research., 190-190.
https://hdl.handle.net/21.15107/rcub_vinar_12347
Petković D, Adnađević B, Jovanović J. Linear and non-linear methods applied to fitting non-isothermal kinetic curves of dehydration of PAAG hydrogel swollen to equilibrium and non-equilibrium state. in AYSS-2022 : The XXVI International Scientific Conference of Young Scientists and Specialists. 2022;:190-190.
https://hdl.handle.net/21.15107/rcub_vinar_12347 .
Petković, Darija, Adnađević, Borivoje, Jovanović, Jelena, "Linear and non-linear methods applied to fitting non-isothermal kinetic curves of dehydration of PAAG hydrogel swollen to equilibrium and non-equilibrium state" in AYSS-2022 : The XXVI International Scientific Conference of Young Scientists and Specialists (2022):190-190,
https://hdl.handle.net/21.15107/rcub_vinar_12347 .