TY  - JOUR
AU  - Lazarević, Zorica Ž.
AU  - Mišković-Stanković, Vesna B.
AU  - Kačarević-Popović, Zorica M.
AU  - Dražić, D. M.
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2867
AB  - Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on aluminium and modified aluminium surfaces (phosphatized, chromatized-phosphatized and anodized aluminium) using a constant voltage method (resin concentration 10 wt.%, temperature 27 degrees C, applied voltage 250 V). The corrosion behavior of these coatings was investigated during exposure to 3% NaCl using electrochemical impedance spectroscopy (EIS) and polarization measurements. From the dependence of resistance, capacitance and relative permittivity of the coating, obtained from EIS, on the rate of hydrogen evolution reaction in the electrodeposition bath, obtained from polarization curves, it can be observed that the epoxy coating on aluminium and modified aluminium surfaces is a good barrier against the transport of corrosive agents. The time corresponding to contact between electrolyte and aluminium surface under the coating is greater in the case of surface modification by chromato-phosphatized and anodized aluminium than in the case of phosphatize one.
T2  - Journal of the Brazilian Chemical Society
T1  - The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces
VL  - 16
IS  - 1
SP  - 98
EP  - 102
DO  - 10.1590/S0103-50532005000100015
ER  - 

@article{
author = "Lazarević, Zorica Ž. and Mišković-Stanković, Vesna B. and Kačarević-Popović, Zorica M. and Dražić, D. M.",
year = "2005",
abstract = "Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on aluminium and modified aluminium surfaces (phosphatized, chromatized-phosphatized and anodized aluminium) using a constant voltage method (resin concentration 10 wt.%, temperature 27 degrees C, applied voltage 250 V). The corrosion behavior of these coatings was investigated during exposure to 3% NaCl using electrochemical impedance spectroscopy (EIS) and polarization measurements. From the dependence of resistance, capacitance and relative permittivity of the coating, obtained from EIS, on the rate of hydrogen evolution reaction in the electrodeposition bath, obtained from polarization curves, it can be observed that the epoxy coating on aluminium and modified aluminium surfaces is a good barrier against the transport of corrosive agents. The time corresponding to contact between electrolyte and aluminium surface under the coating is greater in the case of surface modification by chromato-phosphatized and anodized aluminium than in the case of phosphatize one.",
journal = "Journal of the Brazilian Chemical Society",
title = "The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces",
volume = "16",
number = "1",
pages = "98-102",
doi = "10.1590/S0103-50532005000100015"
}

Lazarević, Z. Ž., Mišković-Stanković, V. B., Kačarević-Popović, Z. M.,& Dražić, D. M.. (2005). The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces. in Journal of the Brazilian Chemical Society, 16(1), 98-102.
https://doi.org/10.1590/S0103-50532005000100015

Lazarević ZŽ, Mišković-Stanković VB, Kačarević-Popović ZM, Dražić DM. The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces. in Journal of the Brazilian Chemical Society. 2005;16(1):98-102.
doi:10.1590/S0103-50532005000100015 .

Lazarević, Zorica Ž., Mišković-Stanković, Vesna B., Kačarević-Popović, Zorica M., Dražić, D. M., "The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces" in Journal of the Brazilian Chemical Society, 16, no. 1 (2005):98-102,
https://doi.org/10.1590/S0103-50532005000100015 . .

TY  - JOUR
AU  - Lazarević, Zorica Ž.
AU  - Mišković-Stanković, Vesna B.
AU  - Kačarević-Popović, Zorica M.
AU  - Dražić, D. M.
PY  - 2005
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/6494
AB  - The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been investigated during exposure to 3% NaCl solution. From the results obtained from electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption experiment and thermogravimetric analysis (TGA) it can be concluded that electrochemical and transport properties of epoxy coatings on anodized and chromatized-phosphatized aluminium are significantly improved with respect to the same epoxy coatings on aluminium and phosphatized aluminium: higher values of pore resistance and charge-transfer resistance and lower values of coating capacitance and double-layer capacitance, from EIS; smaller values of diffusion coefficient of water through epoxy coating, from sorption measurements and smaller amount of absorbed water inside the coating, from TGA. On the other hand, the somewhat lower thermal stability of these coatings was obtained. (C) 2004 Elsevier Ltd. All rights reserved.
T2  - Corrosion Science
T1  - Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
VL  - 47
IS  - 3
SP  - 823
EP  - 834
DO  - 10.1016/j.corsci.2004.07.016
ER  - 

@article{
author = "Lazarević, Zorica Ž. and Mišković-Stanković, Vesna B. and Kačarević-Popović, Zorica M. and Dražić, D. M.",
year = "2005",
abstract = "The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been investigated during exposure to 3% NaCl solution. From the results obtained from electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption experiment and thermogravimetric analysis (TGA) it can be concluded that electrochemical and transport properties of epoxy coatings on anodized and chromatized-phosphatized aluminium are significantly improved with respect to the same epoxy coatings on aluminium and phosphatized aluminium: higher values of pore resistance and charge-transfer resistance and lower values of coating capacitance and double-layer capacitance, from EIS; smaller values of diffusion coefficient of water through epoxy coating, from sorption measurements and smaller amount of absorbed water inside the coating, from TGA. On the other hand, the somewhat lower thermal stability of these coatings was obtained. (C) 2004 Elsevier Ltd. All rights reserved.",
journal = "Corrosion Science",
title = "Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces",
volume = "47",
number = "3",
pages = "823-834",
doi = "10.1016/j.corsci.2004.07.016"
}

Lazarević, Z. Ž., Mišković-Stanković, V. B., Kačarević-Popović, Z. M.,& Dražić, D. M.. (2005). Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces. in Corrosion Science, 47(3), 823-834.
https://doi.org/10.1016/j.corsci.2004.07.016

Lazarević ZŽ, Mišković-Stanković VB, Kačarević-Popović ZM, Dražić DM. Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces. in Corrosion Science. 2005;47(3):823-834.
doi:10.1016/j.corsci.2004.07.016 .

Lazarević, Zorica Ž., Mišković-Stanković, Vesna B., Kačarević-Popović, Zorica M., Dražić, D. M., "Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces" in Corrosion Science, 47, no. 3 (2005):823-834,
https://doi.org/10.1016/j.corsci.2004.07.016 . .

TY  - JOUR
AU  - Bajat, Jelena B.
AU  - Mišković-Stanković, Vesna B.
AU  - Maksimović, M.D.
AU  - Dražić, D. M.
AU  - Zec, Slavica
PY  - 2004
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2824
AB  - Zn-Fe alloy electrochemically deposited on steel under various deposition conditions were investigated using anodic linear sweep voltammetry (ALSV) and X-ray diffraction (XRD) analysis forphase structure determination, energy dispersive X-ray (EDX) analysis for determination of chemical composition, and polarization measurements and open circuit potential measurements for determination of corrosion properties. The influence of deposition current density on the chemical composition, phase structure and corrosion stability of Zn-Fe alloys was studied. It was shown that deposition current density strongly affects the corrosion stability of Zn-Fe alloys, while Zn-Fe alloy electrodeposited at 4 A dm(-2) exhibited the lowest corrosion rate.
T2  - Journal of the Serbian Chemical Society
T1  - Electrochemical deposition and characterization of Zn-Fe alloys
VL  - 69
IS  - 10
SP  - 807
EP  - 815
DO  - 10.2298/JSC0410807B
ER  - 

@article{
author = "Bajat, Jelena B. and Mišković-Stanković, Vesna B. and Maksimović, M.D. and Dražić, D. M. and Zec, Slavica",
year = "2004",
abstract = "Zn-Fe alloy electrochemically deposited on steel under various deposition conditions were investigated using anodic linear sweep voltammetry (ALSV) and X-ray diffraction (XRD) analysis forphase structure determination, energy dispersive X-ray (EDX) analysis for determination of chemical composition, and polarization measurements and open circuit potential measurements for determination of corrosion properties. The influence of deposition current density on the chemical composition, phase structure and corrosion stability of Zn-Fe alloys was studied. It was shown that deposition current density strongly affects the corrosion stability of Zn-Fe alloys, while Zn-Fe alloy electrodeposited at 4 A dm(-2) exhibited the lowest corrosion rate.",
journal = "Journal of the Serbian Chemical Society",
title = "Electrochemical deposition and characterization of Zn-Fe alloys",
volume = "69",
number = "10",
pages = "807-815",
doi = "10.2298/JSC0410807B"
}

Bajat, J. B., Mišković-Stanković, V. B., Maksimović, M.D., Dražić, D. M.,& Zec, S.. (2004). Electrochemical deposition and characterization of Zn-Fe alloys. in Journal of the Serbian Chemical Society, 69(10), 807-815.
https://doi.org/10.2298/JSC0410807B

Bajat JB, Mišković-Stanković VB, Maksimović M, Dražić DM, Zec S. Electrochemical deposition and characterization of Zn-Fe alloys. in Journal of the Serbian Chemical Society. 2004;69(10):807-815.
doi:10.2298/JSC0410807B .

Bajat, Jelena B., Mišković-Stanković, Vesna B., Maksimović, M.D., Dražić, D. M., Zec, Slavica, "Electrochemical deposition and characterization of Zn-Fe alloys" in Journal of the Serbian Chemical Society, 69, no. 10 (2004):807-815,
https://doi.org/10.2298/JSC0410807B . .

TY  - JOUR
AU  - Mišković-Stanković, Vesna B.
AU  - Lazarević, Zorica Ž.
AU  - Kačarević-Popović, Zorica M.
AU  - Dražić, D. M.
PY  - 2002
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2546
AB  - The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized phosphatized and chromatized-phosphatized aluminium) have been investigated in 3% NaCl solution by electrochemical impedance spectroscopy (EIS) gravimetric liquid sorption experiment and thermogravimetric analysis (TGA). Higher values of pore resistance and charge-transfer resistance and lower values of coating capacitance and double layer capacitance were observed for epoxy coatings on anodized and chromatized and phosphatized aluminium. Smaller values of diffusion coefficient of water through epoxy coating from sorption measurements and smaller amount of absorbed water inside the coatings from TGA were obtained for coatings on anodized and chromatized-phosphatized aluminium. On the other hand the somewhat lower thermal stability of these coatings was obtained.
T2  - Bulletin of Electrochemistry
T1  - Corrosion behaviour of epoxy coatings on modified aluminium surfaces
VL  - 18
IS  - 8
SP  - 343
EP  - 348
UR  - https://hdl.handle.net/21.15107/rcub_vinar_2546
ER  - 

@article{
author = "Mišković-Stanković, Vesna B. and Lazarević, Zorica Ž. and Kačarević-Popović, Zorica M. and Dražić, D. M.",
year = "2002",
abstract = "The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized phosphatized and chromatized-phosphatized aluminium) have been investigated in 3% NaCl solution by electrochemical impedance spectroscopy (EIS) gravimetric liquid sorption experiment and thermogravimetric analysis (TGA). Higher values of pore resistance and charge-transfer resistance and lower values of coating capacitance and double layer capacitance were observed for epoxy coatings on anodized and chromatized and phosphatized aluminium. Smaller values of diffusion coefficient of water through epoxy coating from sorption measurements and smaller amount of absorbed water inside the coatings from TGA were obtained for coatings on anodized and chromatized-phosphatized aluminium. On the other hand the somewhat lower thermal stability of these coatings was obtained.",
journal = "Bulletin of Electrochemistry",
title = "Corrosion behaviour of epoxy coatings on modified aluminium surfaces",
volume = "18",
number = "8",
pages = "343-348",
url = "https://hdl.handle.net/21.15107/rcub_vinar_2546"
}

Mišković-Stanković, V. B., Lazarević, Z. Ž., Kačarević-Popović, Z. M.,& Dražić, D. M.. (2002). Corrosion behaviour of epoxy coatings on modified aluminium surfaces. in Bulletin of Electrochemistry, 18(8), 343-348.
https://hdl.handle.net/21.15107/rcub_vinar_2546

Mišković-Stanković VB, Lazarević ZŽ, Kačarević-Popović ZM, Dražić DM. Corrosion behaviour of epoxy coatings on modified aluminium surfaces. in Bulletin of Electrochemistry. 2002;18(8):343-348.
https://hdl.handle.net/21.15107/rcub_vinar_2546 .

Mišković-Stanković, Vesna B., Lazarević, Zorica Ž., Kačarević-Popović, Zorica M., Dražić, D. M., "Corrosion behaviour of epoxy coatings on modified aluminium surfaces" in Bulletin of Electrochemistry, 18, no. 8 (2002):343-348,
https://hdl.handle.net/21.15107/rcub_vinar_2546 .

TY  - JOUR
AU  - Bajat, Jelena B.
AU  - Mišković-Stanković, Vesna B.
AU  - Maksimović, M.D.
AU  - Dražić, D. M.
AU  - Zec, Slavica
PY  - 2002
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2551
AB  - Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure and corrosion properties of Zn-Co alloys were studied. It was found that Zn-Co alloy obtained from chloride solution at 5 A dm(-2) showed the best corrosion properties, so this alloy was chosen for further examination. Epoxy coating was electrodeposited on steel and steel modified by Zn-Co alloy using constant voltage method. The effect of Zn-Co alloy on the corrosion behavior of the protective system based on epoxy coating is interpreted in terms of electrochemical and transport properties, as well as of thermal stability. (C) 2002 Elsevier Science Ltd. All rights reserved.
T2  - Electrochimica Acta
T1  - Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy
VL  - 47
IS  - 25
SP  - 4101
EP  - 4112
DO  - 10.1016/S0013-4686(02)00418-8
ER  - 

@article{
author = "Bajat, Jelena B. and Mišković-Stanković, Vesna B. and Maksimović, M.D. and Dražić, D. M. and Zec, Slavica",
year = "2002",
abstract = "Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure and corrosion properties of Zn-Co alloys were studied. It was found that Zn-Co alloy obtained from chloride solution at 5 A dm(-2) showed the best corrosion properties, so this alloy was chosen for further examination. Epoxy coating was electrodeposited on steel and steel modified by Zn-Co alloy using constant voltage method. The effect of Zn-Co alloy on the corrosion behavior of the protective system based on epoxy coating is interpreted in terms of electrochemical and transport properties, as well as of thermal stability. (C) 2002 Elsevier Science Ltd. All rights reserved.",
journal = "Electrochimica Acta",
title = "Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy",
volume = "47",
number = "25",
pages = "4101-4112",
doi = "10.1016/S0013-4686(02)00418-8"
}

Bajat, J. B., Mišković-Stanković, V. B., Maksimović, M.D., Dražić, D. M.,& Zec, S.. (2002). Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy. in Electrochimica Acta, 47(25), 4101-4112.
https://doi.org/10.1016/S0013-4686(02)00418-8

Bajat JB, Mišković-Stanković VB, Maksimović M, Dražić DM, Zec S. Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy. in Electrochimica Acta. 2002;47(25):4101-4112.
doi:10.1016/S0013-4686(02)00418-8 .

Bajat, Jelena B., Mišković-Stanković, Vesna B., Maksimović, M.D., Dražić, D. M., Zec, Slavica, "Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy" in Electrochimica Acta, 47, no. 25 (2002):4101-4112,
https://doi.org/10.1016/S0013-4686(02)00418-8 . .

TY  - JOUR
AU  - Dražić, D. M.
AU  - Popić, Jovan P.
AU  - Rakočević, Zlatko Lj.
PY  - 1999
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2294
AB  - By combining the techniques of electrochemical slow potentiodynamic, AC impedance and atomic force microscopy (AFM), ii: was shown that the differences in the anodic dissolution rates of Al in 0.5 NaCl solutions as measured experimentally in the potential region between the corrosion and pitting potential, are mainly due to differences in surface roughness of the electrodes used. It was shown that mechanical grinding and polishing of the electrode surface with emery paper (400 grit) and alumina polishing powder (diameter 0.25 mu m) can produce surfaces differing by a factor of 6 in the roughness factor Ra. By using AFM estimates of the roughness factors a true electrode capacitance of 4.63 mu C cm(-2) and thickness d(ox) approximate to 2.0 nm for the barrier layer of the surface film was estamited. The outer part of the film is porous, partly as amorphous AI(OH)(3), or crystalline bayerite (Al2O3.3H(2)O).
T2  - Journal of the Serbian Chemical Society
T1  - Real surface area of the aluminium electrode in sodium chloride solution
VL  - 64
IS  - 11
SP  - 685
EP  - 693
UR  - https://hdl.handle.net/21.15107/rcub_vinar_2294
ER  - 

@article{
author = "Dražić, D. M. and Popić, Jovan P. and Rakočević, Zlatko Lj.",
year = "1999",
abstract = "By combining the techniques of electrochemical slow potentiodynamic, AC impedance and atomic force microscopy (AFM), ii: was shown that the differences in the anodic dissolution rates of Al in 0.5 NaCl solutions as measured experimentally in the potential region between the corrosion and pitting potential, are mainly due to differences in surface roughness of the electrodes used. It was shown that mechanical grinding and polishing of the electrode surface with emery paper (400 grit) and alumina polishing powder (diameter 0.25 mu m) can produce surfaces differing by a factor of 6 in the roughness factor Ra. By using AFM estimates of the roughness factors a true electrode capacitance of 4.63 mu C cm(-2) and thickness d(ox) approximate to 2.0 nm for the barrier layer of the surface film was estamited. The outer part of the film is porous, partly as amorphous AI(OH)(3), or crystalline bayerite (Al2O3.3H(2)O).",
journal = "Journal of the Serbian Chemical Society",
title = "Real surface area of the aluminium electrode in sodium chloride solution",
volume = "64",
number = "11",
pages = "685-693",
url = "https://hdl.handle.net/21.15107/rcub_vinar_2294"
}

Dražić, D. M., Popić, J. P.,& Rakočević, Z. Lj.. (1999). Real surface area of the aluminium electrode in sodium chloride solution. in Journal of the Serbian Chemical Society, 64(11), 685-693.
https://hdl.handle.net/21.15107/rcub_vinar_2294

Dražić DM, Popić JP, Rakočević ZL. Real surface area of the aluminium electrode in sodium chloride solution. in Journal of the Serbian Chemical Society. 1999;64(11):685-693.
https://hdl.handle.net/21.15107/rcub_vinar_2294 .

Dražić, D. M., Popić, Jovan P., Rakočević, Zlatko Lj., "Real surface area of the aluminium electrode in sodium chloride solution" in Journal of the Serbian Chemical Society, 64, no. 11 (1999):685-693,
https://hdl.handle.net/21.15107/rcub_vinar_2294 .

TY  - JOUR
AU  - Mišković-Stanković, Vesna B.
AU  - Dražić, D. M.
AU  - Kačarević-Popović, Zorica M.
PY  - 1996
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/2018
AB  - Organic protective coatings on steel were formed by cathodic electrodeposition of an epoxy resin modified by an amine and isocyanate using a constant voltage method (resin concentration 10% wt, temperature 26 degrees C, applied voltage 250 V). The corrosion behaviour of these coatings was investigated during exposure to different corrosive agents (H2O, 3% NaCl, 3% Na2SO4, 3% sodium salt of 2-naphthol-3,6 disulphonic acid) using a.c. impedance measurements, gravimetric liquid sorption experiments and differential scanning calorimetry (DSC), with the aim of explaining the mechanism of coating degradation. The time required to saturate the coating with pure water, obtained from the sorption data, coincides with the initial increase in coating capacitance and initial decrease in pore resistance, obtained from a.c. impedance measurements, denoting the entry of electrolyte into the coating. The first step of electrolyte penetration through the coating is related to water uptake, when molecules of pure water diffuse in the micropores of polymer net according to Ficks law and it is independent of type and dimensions of ions in the electrolyte. Similar values of enthalpy of vaporization of different volatile electrolytes and the quantity of water inside the coating, obtained from DSC measurements were in agreement with the proposed mechanism. From the calculated diffusion coefficient for coatings where external layers were mechanically removed, it can be concluded that the micropores of the polymer net are homogeneously distributed throughout the coating. Copyright (C) 1996 Elsevier Science Ltd
T2  - Corrosion Science
T1  - The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents
VL  - 38
IS  - 9
SP  - 1513
EP  - 1523
DO  - 10.1016/0010-938X(96)00042-X
ER  - 

@article{
author = "Mišković-Stanković, Vesna B. and Dražić, D. M. and Kačarević-Popović, Zorica M.",
year = "1996",
abstract = "Organic protective coatings on steel were formed by cathodic electrodeposition of an epoxy resin modified by an amine and isocyanate using a constant voltage method (resin concentration 10% wt, temperature 26 degrees C, applied voltage 250 V). The corrosion behaviour of these coatings was investigated during exposure to different corrosive agents (H2O, 3% NaCl, 3% Na2SO4, 3% sodium salt of 2-naphthol-3,6 disulphonic acid) using a.c. impedance measurements, gravimetric liquid sorption experiments and differential scanning calorimetry (DSC), with the aim of explaining the mechanism of coating degradation. The time required to saturate the coating with pure water, obtained from the sorption data, coincides with the initial increase in coating capacitance and initial decrease in pore resistance, obtained from a.c. impedance measurements, denoting the entry of electrolyte into the coating. The first step of electrolyte penetration through the coating is related to water uptake, when molecules of pure water diffuse in the micropores of polymer net according to Ficks law and it is independent of type and dimensions of ions in the electrolyte. Similar values of enthalpy of vaporization of different volatile electrolytes and the quantity of water inside the coating, obtained from DSC measurements were in agreement with the proposed mechanism. From the calculated diffusion coefficient for coatings where external layers were mechanically removed, it can be concluded that the micropores of the polymer net are homogeneously distributed throughout the coating. Copyright (C) 1996 Elsevier Science Ltd",
journal = "Corrosion Science",
title = "The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents",
volume = "38",
number = "9",
pages = "1513-1523",
doi = "10.1016/0010-938X(96)00042-X"
}

Mišković-Stanković, V. B., Dražić, D. M.,& Kačarević-Popović, Z. M.. (1996). The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents. in Corrosion Science, 38(9), 1513-1523.
https://doi.org/10.1016/0010-938X(96)00042-X

Mišković-Stanković VB, Dražić DM, Kačarević-Popović ZM. The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents. in Corrosion Science. 1996;38(9):1513-1523.
doi:10.1016/0010-938X(96)00042-X .

Mišković-Stanković, Vesna B., Dražić, D. M., Kačarević-Popović, Zorica M., "The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents" in Corrosion Science, 38, no. 9 (1996):1513-1523,
https://doi.org/10.1016/0010-938X(96)00042-X . .