Mitrić, Miodrag

Link to this page

Authority KeyName Variants
orcid::0000-0002-1709-9890
  • Mitrić, Miodrag (397)
Projects
Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites Directed synthesis, structure and properties of multifunctional materials
Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them Magnetic and radionuclide labeled nanostructured materials for medical applications
Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion Functional, Functionalized and Advanced Nanomaterials
Lithium-ion batteries and fuel cells - research and development Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Optoelectronics nanodimension systems - the rout towards applications Electroconducting and redox-active polymers and oligomers: synthesis, structure, properties and applications
Physical processes in the synthesis of advanced nanostructured materials Advanced technologies for monitoring and environmental protection from chemical pollutants and radiation burden
Nanostructured Functional and Composite Materials in Catalytic and Sorption Processes Sinteza funkcionalnih materijala sa kontrolisanom strukturom na molekularnom i nano nivou
SPIRIT - Support of Public and Industrial Research using Ion Beam Technology Physics of collisions and photo processes in atomic, (bio)molecular and nanosized systems
Fabrication and characterization of nano-photonic functional structrues in biomedicine and informatics Nanostructured multifunctional materials and nanocomposites
Application of biotechnological methods for sustainable exploitation of by-products of agro-industry Advanced technologies for controlled release from solid drug delivery systems
Predefined functional properties polymer composite materials processes and equipment development Investigation of intermetallics and semiconductors and possible application in renewable energy sources
Dynamics of nonlinear physicochemical and biochemical systems with modeling and predicting of their behavior under nonequilibrium conditions Chemical and structural designing of nanomaterials for application in medicine and tissue engineering
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade) Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing
Investigation of the relation in triad: Synthesis structure-properties for functional materials Struktura, termodinamičke i elektrohemijske osobine materijala za konverziju energije i nove tehnologije
Serbian Academy of Sciences and Arts German-Serbian DAAD bilateral collaboration [451-03-01038/2015-09118/18]

Author's Bibliography

Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol

Kovačević, Nikola; Dapčević, Aleksandra; Ivković, Branka; Kachrimanis, Kyriakos; Mitrić, Miodrag; Ibrić, Svetlana; Medarević, Đorđe

TY  - JOUR
AU  - Kovačević, Nikola
AU  - Dapčević, Aleksandra
AU  - Ivković, Branka
AU  - Kachrimanis, Kyriakos
AU  - Mitrić, Miodrag
AU  - Ibrić, Svetlana
AU  - Medarević, Đorđe
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9932
AB  - In this study, four low molecular weight (LMW) excipients, tryptophan (TRY), phenylalanine (PHE), lysine (LYS) and saccharin (SAC) were evaluated as co-formers to generate co-amorphous systems (CAMS) by ball milling with carvedilol (CRV). Mixtures of CRV and LMW excipient in 1:0.5, 1:1 and 1:2 drug:excipient molar ratios were ball milled and analysed by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Fourier transform (FT-IR) infrared spectroscopy and dissolution testing. CAMS were formed by milling of a mixture of CRV with TRY in 1:2 M ratio and SAC in 1:1 M ratio, while amorphization of only CRV was achieved in other mixtures with SAC. In other samples containing TRY and PHE, milling resulted in partial amorphization, while LYS was the least suitable excipient for the amorphization of CRV. Unexpectedly, the highest supersaturation of CRV was achieved from samples containing CRV and LYS in 1:1 and 1:2 M ratios, despite the absence of a significant reduction in CRV crystallinity upon milling of these samples. Increase of hydrophobic surface area caused by milling of samples with TRY and PHE and agglomeration during dissolution testing of samples containing SAC are likely causes of poor dissolution performance of mixtures containing fully or partially amorphous CRV.
T2  - International Journal of Pharmaceutics
T1  - Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol
VL  - 608
DO  - 10.1016/j.ijpharm.2021.121033
ER  - 
@article{
author = "Kovačević, Nikola and Dapčević, Aleksandra and Ivković, Branka and Kachrimanis, Kyriakos and Mitrić, Miodrag and Ibrić, Svetlana and Medarević, Đorđe",
abstract = "In this study, four low molecular weight (LMW) excipients, tryptophan (TRY), phenylalanine (PHE), lysine (LYS) and saccharin (SAC) were evaluated as co-formers to generate co-amorphous systems (CAMS) by ball milling with carvedilol (CRV). Mixtures of CRV and LMW excipient in 1:0.5, 1:1 and 1:2 drug:excipient molar ratios were ball milled and analysed by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Fourier transform (FT-IR) infrared spectroscopy and dissolution testing. CAMS were formed by milling of a mixture of CRV with TRY in 1:2 M ratio and SAC in 1:1 M ratio, while amorphization of only CRV was achieved in other mixtures with SAC. In other samples containing TRY and PHE, milling resulted in partial amorphization, while LYS was the least suitable excipient for the amorphization of CRV. Unexpectedly, the highest supersaturation of CRV was achieved from samples containing CRV and LYS in 1:1 and 1:2 M ratios, despite the absence of a significant reduction in CRV crystallinity upon milling of these samples. Increase of hydrophobic surface area caused by milling of samples with TRY and PHE and agglomeration during dissolution testing of samples containing SAC are likely causes of poor dissolution performance of mixtures containing fully or partially amorphous CRV.",
journal = "International Journal of Pharmaceutics",
title = "Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol",
volume = "608",
doi = "10.1016/j.ijpharm.2021.121033"
}
Kovačević, N., Dapčević, A., Ivković, B., Kachrimanis, K., Mitrić, M., Ibrić, S.,& Medarević, Đ..Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol. in International Journal of Pharmaceutics, 608.
https://doi.org/10.1016/j.ijpharm.2021.121033
Kovačević N, Dapčević A, Ivković B, Kachrimanis K, Mitrić M, Ibrić S, Medarević Đ. Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol. in International Journal of Pharmaceutics.608.
doi:10.1016/j.ijpharm.2021.121033 .
Kovačević, Nikola, Dapčević, Aleksandra, Ivković, Branka, Kachrimanis, Kyriakos, Mitrić, Miodrag, Ibrić, Svetlana, Medarević, Đorđe, "Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol" in International Journal of Pharmaceutics, 608,
https://doi.org/10.1016/j.ijpharm.2021.121033 . .
3
1
1

Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium

Marković, Smilja; Rau, Julietta V.; De Bonis, Angela; De Bellis, Giovanni; Stojanović, Zoran; Veselinović, Ljiljana; Mitrić, Miodrag; Ignjatović, Nenad; Škapin, Srečo Davor; Vengust, Damjan

(2022)

TY  - JOUR
AU  - Marković, Smilja
AU  - Rau, Julietta V.
AU  - De Bonis, Angela
AU  - De Bellis, Giovanni
AU  - Stojanović, Zoran
AU  - Veselinović, Ljiljana
AU  - Mitrić, Miodrag
AU  - Ignjatović, Nenad
AU  - Škapin, Srečo Davor
AU  - Vengust, Damjan
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10206
AB  - Dense calcium phosphate-based ceramics were fabricated to be used as targets for pulsed laser deposition (PLD). Nanostructured cobalt-substituted hydroxyapatite (Co:HAP) was used as a starting powder. To vary phase composition and microstructure of targets, two sintering approaches were applied, conventional (CS) and two-step sintering (TSS). The obtained results show that in both cases biphasic calcium phosphate (BCP) ceramics (targets) were prepared, with slightly different HAP-to-β–TCP amount ratio and a significantly different microstructure. While the CS method yielded fully dense ceramics with an average grain size of 1.3 μm, the ceramics prepared by TSS had a density of 98.5%, with a predominant grain size below 100 nm. (Ca + Co)P coatings were prepared by PLD of (Ca + Co)P targets. The temperature of the Ti substrate was adjusted to be 25 and 500 °C. The results show that the phase composition of (Ca + Co)P coatings depended on the phase composition of targets as well as on the temperature of the Ti substrate. The coating prepared at 25 °C using CS target consisted of three calcium phosphate phases, HAP, β–TCP and α–TCP; when the TSS target was used, the coating was biphasic, containing HAP and β–TCP. When the substrate was heated to 500 °C, regardless of whether the CS or the TSS target was used, the deposited coatings were composed of HAP and α–TCP. Due to different phase compositions, the (Ca + Co)P coatings deposited at 25 °C showed an improved hardness compared to those deposited at 500 °C. The obtained results confirmed that the phase composition, morphology and mechanical properties of 0.3 μm thick (Ca + Co)P coatings on a Ti substrate can be tailored by employing (Ca + Co)P targets with different microstructures, and also by varying the temperature of the Ti substrate during deposition experiments.
T2  - Surface and Coatings Technology
T2  - Surface and Coatings TechnologySurface and Coatings Technology
T1  - Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium
VL  - 437
SP  - 128275
DO  - 10.1016/j.surfcoat.2022.128275
ER  - 
@article{
author = "Marković, Smilja and Rau, Julietta V. and De Bonis, Angela and De Bellis, Giovanni and Stojanović, Zoran and Veselinović, Ljiljana and Mitrić, Miodrag and Ignjatović, Nenad and Škapin, Srečo Davor and Vengust, Damjan",
year = "2022",
abstract = "Dense calcium phosphate-based ceramics were fabricated to be used as targets for pulsed laser deposition (PLD). Nanostructured cobalt-substituted hydroxyapatite (Co:HAP) was used as a starting powder. To vary phase composition and microstructure of targets, two sintering approaches were applied, conventional (CS) and two-step sintering (TSS). The obtained results show that in both cases biphasic calcium phosphate (BCP) ceramics (targets) were prepared, with slightly different HAP-to-β–TCP amount ratio and a significantly different microstructure. While the CS method yielded fully dense ceramics with an average grain size of 1.3 μm, the ceramics prepared by TSS had a density of 98.5%, with a predominant grain size below 100 nm. (Ca + Co)P coatings were prepared by PLD of (Ca + Co)P targets. The temperature of the Ti substrate was adjusted to be 25 and 500 °C. The results show that the phase composition of (Ca + Co)P coatings depended on the phase composition of targets as well as on the temperature of the Ti substrate. The coating prepared at 25 °C using CS target consisted of three calcium phosphate phases, HAP, β–TCP and α–TCP; when the TSS target was used, the coating was biphasic, containing HAP and β–TCP. When the substrate was heated to 500 °C, regardless of whether the CS or the TSS target was used, the deposited coatings were composed of HAP and α–TCP. Due to different phase compositions, the (Ca + Co)P coatings deposited at 25 °C showed an improved hardness compared to those deposited at 500 °C. The obtained results confirmed that the phase composition, morphology and mechanical properties of 0.3 μm thick (Ca + Co)P coatings on a Ti substrate can be tailored by employing (Ca + Co)P targets with different microstructures, and also by varying the temperature of the Ti substrate during deposition experiments.",
journal = "Surface and Coatings Technology, Surface and Coatings TechnologySurface and Coatings Technology",
title = "Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium",
volume = "437",
pages = "128275",
doi = "10.1016/j.surfcoat.2022.128275"
}
Marković, S., Rau, J. V., De Bonis, A., De Bellis, G., Stojanović, Z., Veselinović, L., Mitrić, M., Ignjatović, N., Škapin, S. D.,& Vengust, D.. (2022). Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium. in Surface and Coatings Technology, 437, 128275.
https://doi.org/10.1016/j.surfcoat.2022.128275
Marković S, Rau JV, De Bonis A, De Bellis G, Stojanović Z, Veselinović L, Mitrić M, Ignjatović N, Škapin SD, Vengust D. Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium. in Surface and Coatings Technology. 2022;437:128275.
doi:10.1016/j.surfcoat.2022.128275 .
Marković, Smilja, Rau, Julietta V., De Bonis, Angela, De Bellis, Giovanni, Stojanović, Zoran, Veselinović, Ljiljana, Mitrić, Miodrag, Ignjatović, Nenad, Škapin, Srečo Davor, Vengust, Damjan, "Pathway to tailor the phase composition, microstructure and mechanical properties of pulsed laser deposited cobalt-substituted calcium phosphate coatings on titanium" in Surface and Coatings Technology, 437 (2022):128275,
https://doi.org/10.1016/j.surfcoat.2022.128275 . .

Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study

Pijović, Milena; Manić, Nebojša G.; Vasić Anićijević, Dragana D.; Krstić, Aleksandar; Mitrić, Miodrag; Matić, Tamara; Janković, Bojan Ž.

(2022)

TY  - JOUR
AU  - Pijović, Milena
AU  - Manić, Nebojša G.
AU  - Vasić Anićijević, Dragana D.
AU  - Krstić, Aleksandar
AU  - Mitrić, Miodrag
AU  - Matić, Tamara
AU  - Janković, Bojan Ž.
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10077
AB  - Pyrolytic tire (PT) chars were first produced from waste car tires (WCT) through carbonization process at 800 °C, for different retention times. Then, best PT-char sample by its physicochemical properties (WCT 800(1 h)) was further tested for its ability to adsorb Rhodamine B (RhB) dye from aqueous solutions. Structural characterization of synthesized material showed existence of graphene-based material, with average pore diameter of 22.8 nm and specific surface area of 55.8 m2·g−1. Obtained carbon material meets specifications of commercial carbon black (CB). The yield of 33.6% of CB recovered has been achieved. Under the optimal conditions, 99.57% of RhB was removed. Adsorption of RhB obeys pseudo second-order model and Langmuir isotherm model. DFT (the density functional theory) was revealed that effective bonding of RhB onto WCT 800 originates from π-electron interactions with aromatic moieties and chemical (or at least the electrostatic) interactions, between positive nitrogen and electron-rich surface groups.
T2  - Diamond and Related Materials
T1  - Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study
VL  - 121
SP  - 108768
DO  - 10.1016/j.diamond.2021.108768
ER  - 
@article{
author = "Pijović, Milena and Manić, Nebojša G. and Vasić Anićijević, Dragana D. and Krstić, Aleksandar and Mitrić, Miodrag and Matić, Tamara and Janković, Bojan Ž.",
year = "2022",
abstract = "Pyrolytic tire (PT) chars were first produced from waste car tires (WCT) through carbonization process at 800 °C, for different retention times. Then, best PT-char sample by its physicochemical properties (WCT 800(1 h)) was further tested for its ability to adsorb Rhodamine B (RhB) dye from aqueous solutions. Structural characterization of synthesized material showed existence of graphene-based material, with average pore diameter of 22.8 nm and specific surface area of 55.8 m2·g−1. Obtained carbon material meets specifications of commercial carbon black (CB). The yield of 33.6% of CB recovered has been achieved. Under the optimal conditions, 99.57% of RhB was removed. Adsorption of RhB obeys pseudo second-order model and Langmuir isotherm model. DFT (the density functional theory) was revealed that effective bonding of RhB onto WCT 800 originates from π-electron interactions with aromatic moieties and chemical (or at least the electrostatic) interactions, between positive nitrogen and electron-rich surface groups.",
journal = "Diamond and Related Materials",
title = "Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study",
volume = "121",
pages = "108768",
doi = "10.1016/j.diamond.2021.108768"
}
Pijović, M., Manić, N. G., Vasić Anićijević, D. D., Krstić, A., Mitrić, M., Matić, T.,& Janković, B. Ž.. (2022). Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study. in Diamond and Related Materials, 121, 108768.
https://doi.org/10.1016/j.diamond.2021.108768
Pijović M, Manić NG, Vasić Anićijević DD, Krstić A, Mitrić M, Matić T, Janković BŽ. Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study. in Diamond and Related Materials. 2022;121:108768.
doi:10.1016/j.diamond.2021.108768 .
Pijović, Milena, Manić, Nebojša G., Vasić Anićijević, Dragana D., Krstić, Aleksandar, Mitrić, Miodrag, Matić, Tamara, Janković, Bojan Ž., "Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study" in Diamond and Related Materials, 121 (2022):108768,
https://doi.org/10.1016/j.diamond.2021.108768 . .
1
1

Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS

Radisavljević, Ivana; Novaković, Nikola; Mahnke, Heinz-Eberhard; Romčević, Nebojša; Mitrić, Miodrag; Kuzmanović, Bojana; Ivanović, Nenad

(2022)

TY  - JOUR
AU  - Radisavljević, Ivana
AU  - Novaković, Nikola
AU  - Mahnke, Heinz-Eberhard
AU  - Romčević, Nebojša
AU  - Mitrić, Miodrag
AU  - Kuzmanović, Bojana
AU  - Ivanović, Nenad
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10268
AB  - As an extension of our previous studies of multi-component semiconductors doped with magnetic impurities, this paper gives a comprehensive insight into electronic and local structure of crystalline semiconductors Cd0.98Co0.02Se, Cd0.98Co0.02Se0.9S0.1, and Cd0.98Co0.02Se0.9Te0.1. Detailed characterization of Co and Se local environment and overall influence of Co and S(Te) (co)doping on the host crystal structure has been obtained by X-ray absorption fine structure (XAFS) technique and electronic structure calculations. Important structural information on bond lengths and disorder parameters were extracted from the extended region of the absorption spectra, while the relationships between electronic and local structures were determined from the characteristic features appearing in the near-edge spectral region. The influence of various structural defects on local electronic properties, charge transfer and atomic interactions has been studied by theoretical modeling of XAFS spectra and calculations of local density of electronic states. The obtained findings offer possible means for improvement and extension of the practical application of CdSe-based materials by adjusting the details of their electronic structure.
T2  - Journal of the Physical Society of Japan
T1  - Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS
VL  - 91
IS  - 5
SP  - 054801
DO  - 10.7566/JPSJ.91.054801
ER  - 
@article{
author = "Radisavljević, Ivana and Novaković, Nikola and Mahnke, Heinz-Eberhard and Romčević, Nebojša and Mitrić, Miodrag and Kuzmanović, Bojana and Ivanović, Nenad",
year = "2022",
abstract = "As an extension of our previous studies of multi-component semiconductors doped with magnetic impurities, this paper gives a comprehensive insight into electronic and local structure of crystalline semiconductors Cd0.98Co0.02Se, Cd0.98Co0.02Se0.9S0.1, and Cd0.98Co0.02Se0.9Te0.1. Detailed characterization of Co and Se local environment and overall influence of Co and S(Te) (co)doping on the host crystal structure has been obtained by X-ray absorption fine structure (XAFS) technique and electronic structure calculations. Important structural information on bond lengths and disorder parameters were extracted from the extended region of the absorption spectra, while the relationships between electronic and local structures were determined from the characteristic features appearing in the near-edge spectral region. The influence of various structural defects on local electronic properties, charge transfer and atomic interactions has been studied by theoretical modeling of XAFS spectra and calculations of local density of electronic states. The obtained findings offer possible means for improvement and extension of the practical application of CdSe-based materials by adjusting the details of their electronic structure.",
journal = "Journal of the Physical Society of Japan",
title = "Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS",
volume = "91",
number = "5",
pages = "054801",
doi = "10.7566/JPSJ.91.054801"
}
Radisavljević, I., Novaković, N., Mahnke, H., Romčević, N., Mitrić, M., Kuzmanović, B.,& Ivanović, N.. (2022). Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS. in Journal of the Physical Society of Japan, 91(5), 054801.
https://doi.org/10.7566/JPSJ.91.054801
Radisavljević I, Novaković N, Mahnke H, Romčević N, Mitrić M, Kuzmanović B, Ivanović N. Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS. in Journal of the Physical Society of Japan. 2022;91(5):054801.
doi:10.7566/JPSJ.91.054801 .
Radisavljević, Ivana, Novaković, Nikola, Mahnke, Heinz-Eberhard, Romčević, Nebojša, Mitrić, Miodrag, Kuzmanović, Bojana, Ivanović, Nenad, "Survey of Electronic and Local Structural Properties of Cd1−xCoxSe1−yTe(S)y by XAFS" in Journal of the Physical Society of Japan, 91, no. 5 (2022):054801,
https://doi.org/10.7566/JPSJ.91.054801 . .
1

Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode

Milović, Miloš; Vujković, Milica; Jugović, Dragana; Mitrić, Miodrag

(2021)

TY  - JOUR
AU  - Milović, Miloš
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9148
AB  - Electrochemical and structural properties of LiV2O5 cathode were investigated. Obtained by solid state reaction at high temperature the material crystallized as gamma polymorph phase, γ-LiV2O5. The gamma structure provides two crystallographic sites to accommodate lithium ions, Li1 and Li2 position. Lithium insertion at these two sites occurs at two respective voltages versus lithium metal: ~3.6 V (Li1) and ~2.4 V (Li2). Intercalation at Li1 position is reversible in both organic and aqueous electrolyte and provides stable cycling performance at the high voltage. On the contrary, sluggish insertion/removal of Li+ at Li2 sites causes unstable performance and significant storage capacity fade at lower voltages. Lithium diffusion 3d landscape was determined by bond valence calculations applied on the γ-LiV2O5 phase, as well as on the metastable phases of γ′-V2O5 and ζ-Li2V2O5 that exist at high and low voltages respectively. The model was proposed based on inactivity of Li2 position of the metastable ζ-Li2V2O5 phase which provides explanation for the observed storage capacity loss at low voltages. © 2021 Elsevier Ltd and Techna Group S.r.l.
T2  - Ceramics International
T1  - Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode
VL  - 47
IS  - 12
SP  - 17077
EP  - 17083
DO  - 10.1016/j.ceramint.2021.03.016
ER  - 
@article{
author = "Milović, Miloš and Vujković, Milica and Jugović, Dragana and Mitrić, Miodrag",
year = "2021",
abstract = "Electrochemical and structural properties of LiV2O5 cathode were investigated. Obtained by solid state reaction at high temperature the material crystallized as gamma polymorph phase, γ-LiV2O5. The gamma structure provides two crystallographic sites to accommodate lithium ions, Li1 and Li2 position. Lithium insertion at these two sites occurs at two respective voltages versus lithium metal: ~3.6 V (Li1) and ~2.4 V (Li2). Intercalation at Li1 position is reversible in both organic and aqueous electrolyte and provides stable cycling performance at the high voltage. On the contrary, sluggish insertion/removal of Li+ at Li2 sites causes unstable performance and significant storage capacity fade at lower voltages. Lithium diffusion 3d landscape was determined by bond valence calculations applied on the γ-LiV2O5 phase, as well as on the metastable phases of γ′-V2O5 and ζ-Li2V2O5 that exist at high and low voltages respectively. The model was proposed based on inactivity of Li2 position of the metastable ζ-Li2V2O5 phase which provides explanation for the observed storage capacity loss at low voltages. © 2021 Elsevier Ltd and Techna Group S.r.l.",
journal = "Ceramics International",
title = "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode",
volume = "47",
number = "12",
pages = "17077-17083",
doi = "10.1016/j.ceramint.2021.03.016"
}
Milović, M., Vujković, M., Jugović, D.,& Mitrić, M.. (2021). Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode. in Ceramics International, 47(12), 17077-17083.
https://doi.org/10.1016/j.ceramint.2021.03.016
Milović M, Vujković M, Jugović D, Mitrić M. Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode. in Ceramics International. 2021;47(12):17077-17083.
doi:10.1016/j.ceramint.2021.03.016 .
Milović, Miloš, Vujković, Milica, Jugović, Dragana, Mitrić, Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" in Ceramics International, 47, no. 12 (2021):17077-17083,
https://doi.org/10.1016/j.ceramint.2021.03.016 . .

Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix

Milović, Miloš; Jugović, Dragana; Vujković, Milica; Kuzmanović, Maja D.; Mraković, Ana Đ.; Mitrić, Miodrag

(2021)

TY  - JOUR
AU  - Milović, Miloš
AU  - Jugović, Dragana
AU  - Vujković, Milica
AU  - Kuzmanović, Maja D.
AU  - Mraković, Ana Đ.
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9799
AB  - The polyanion cathodes for Li-ion batteries, namely LiFePO4, Li2FeP2O7 and Li2FeSiO4, were synthesized by very short high-temperature treatment (approximately several minutes) and subsequent quenching. Methylcellulose—a polymer with thermally driven water solubility—was used as the medium in which the precursor solutions were dispersed prior to high temperature treatment. The methylcellulose pyrolytically decomposes to carbon, thus producing the polyanion material/carbon composites of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C. The obtained powders have reduced crystallinity and significant microstructural characteristics: low crystallite size and notable microstrain. They exhibit stable electrochemical performances in both aqueous and organic electrolyte. The broadening of existing peaks in cyclic voltammetry and/or the emergence of new broad peaks was attributed to the presence of the amorphous phase in the samples. In galvanostatic charge–discharge tests, the materials provided high capacities at low current densities, while the highest rate performance was demonstrated by olivine-phosphate when compared to the other two materials.
T2  - Bulletin of Materials Science
T1  - Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix
VL  - 44
IS  - 2
SP  - 144
DO  - 10.1007/s12034-021-02397-3
ER  - 
@article{
author = "Milović, Miloš and Jugović, Dragana and Vujković, Milica and Kuzmanović, Maja D. and Mraković, Ana Đ. and Mitrić, Miodrag",
year = "2021",
abstract = "The polyanion cathodes for Li-ion batteries, namely LiFePO4, Li2FeP2O7 and Li2FeSiO4, were synthesized by very short high-temperature treatment (approximately several minutes) and subsequent quenching. Methylcellulose—a polymer with thermally driven water solubility—was used as the medium in which the precursor solutions were dispersed prior to high temperature treatment. The methylcellulose pyrolytically decomposes to carbon, thus producing the polyanion material/carbon composites of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C. The obtained powders have reduced crystallinity and significant microstructural characteristics: low crystallite size and notable microstrain. They exhibit stable electrochemical performances in both aqueous and organic electrolyte. The broadening of existing peaks in cyclic voltammetry and/or the emergence of new broad peaks was attributed to the presence of the amorphous phase in the samples. In galvanostatic charge–discharge tests, the materials provided high capacities at low current densities, while the highest rate performance was demonstrated by olivine-phosphate when compared to the other two materials.",
journal = "Bulletin of Materials Science",
title = "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix",
volume = "44",
number = "2",
pages = "144",
doi = "10.1007/s12034-021-02397-3"
}
Milović, M., Jugović, D., Vujković, M., Kuzmanović, M. D., Mraković, A. Đ.,& Mitrić, M.. (2021). Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix. in Bulletin of Materials Science, 44(2), 144.
https://doi.org/10.1007/s12034-021-02397-3
Milović M, Jugović D, Vujković M, Kuzmanović MD, Mraković AĐ, Mitrić M. Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix. in Bulletin of Materials Science. 2021;44(2):144.
doi:10.1007/s12034-021-02397-3 .
Milović, Miloš, Jugović, Dragana, Vujković, Milica, Kuzmanović, Maja D., Mraković, Ana Đ., Mitrić, Miodrag, "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix" in Bulletin of Materials Science, 44, no. 2 (2021):144,
https://doi.org/10.1007/s12034-021-02397-3 . .

Microsized fayalite Fe2SiO4 as anode material: the structure, electrochemical properties and working mechanism

Jugović, Dragana; Milović, Miloš; Ivanovski, Valentin N.; Škapin, Srečo Davor; Barudžija, Tanja; Mitrić, Miodrag

(2021)

TY  - JOUR
AU  - Jugović, Dragana
AU  - Milović, Miloš
AU  - Ivanovski, Valentin N.
AU  - Škapin, Srečo Davor
AU  - Barudžija, Tanja
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9921
AB  - Fayalite Fe2SiO4 is synthesized by the solid-state reaction without ball milling. The obtained powder is further structurally and electrochemically examined. Field emission scanning electron microscopy (FESEM) showed that microsized powder is obtained. X-ray powder diffraction (XRD) pattern is used for both phase identification and crystal structure Rietveld refinement. The structure is refined in the orthorhombic Pbnm space group. Mössbauer spectroscopy revealed traces of Fe3+ impurity. The bond valence mapping method is applied for the first time on Fe2SiO4 framework. It shows isolated, non-connected isosurfaces of constant E(Li), which further supports the assumptions of the conversion reactions. Electrochemical performances are investigated through galvanostatic cycling, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). Ex-situ XRD and Fourier transform infrared spectroscopy (FTIR) analyses are combined to monitor phase change after galvanostatic cycling and to reveal the working mechanism during electrochemical lithiation.
T2  - Journal of Electroceramics
T1  - Microsized fayalite Fe2SiO4 as anode material: the structure, electrochemical properties and working mechanism
DO  - 10.1007/s10832-021-00260-9
ER  - 
@article{
author = "Jugović, Dragana and Milović, Miloš and Ivanovski, Valentin N. and Škapin, Srečo Davor and Barudžija, Tanja and Mitrić, Miodrag",
year = "2021",
abstract = "Fayalite Fe2SiO4 is synthesized by the solid-state reaction without ball milling. The obtained powder is further structurally and electrochemically examined. Field emission scanning electron microscopy (FESEM) showed that microsized powder is obtained. X-ray powder diffraction (XRD) pattern is used for both phase identification and crystal structure Rietveld refinement. The structure is refined in the orthorhombic Pbnm space group. Mössbauer spectroscopy revealed traces of Fe3+ impurity. The bond valence mapping method is applied for the first time on Fe2SiO4 framework. It shows isolated, non-connected isosurfaces of constant E(Li), which further supports the assumptions of the conversion reactions. Electrochemical performances are investigated through galvanostatic cycling, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). Ex-situ XRD and Fourier transform infrared spectroscopy (FTIR) analyses are combined to monitor phase change after galvanostatic cycling and to reveal the working mechanism during electrochemical lithiation.",
journal = "Journal of Electroceramics",
title = "Microsized fayalite Fe2SiO4 as anode material: the structure, electrochemical properties and working mechanism",
doi = "10.1007/s10832-021-00260-9"
}
Jugović, D., Milović, M., Ivanovski, V. N., Škapin, S. D., Barudžija, T.,& Mitrić, M.. (2021). Microsized fayalite Fe2SiO4 as anode material: the structure, electrochemical properties and working mechanism. in Journal of Electroceramics.
https://doi.org/10.1007/s10832-021-00260-9
Jugović D, Milović M, Ivanovski VN, Škapin SD, Barudžija T, Mitrić M. Microsized fayalite Fe2SiO4 as anode material: the structure, electrochemical properties and working mechanism. in Journal of Electroceramics. 2021;.
doi:10.1007/s10832-021-00260-9 .
Jugović, Dragana, Milović, Miloš, Ivanovski, Valentin N., Škapin, Srečo Davor, Barudžija, Tanja, Mitrić, Miodrag, "Microsized fayalite Fe2SiO4 as anode material: the structure, electrochemical properties and working mechanism" in Journal of Electroceramics (2021),
https://doi.org/10.1007/s10832-021-00260-9 . .

Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders

Mitrić, Jelena; Paunović, Novica M.; Mitrić, Miodrag; Ćirković, Jovana; Gilić, Martina D.; Romčević, Maja J.; Romčević, Nebojša

(2021)

TY  - JOUR
AU  - Mitrić, Jelena
AU  - Paunović, Novica M.
AU  - Mitrić, Miodrag
AU  - Ćirković, Jovana
AU  - Gilić, Martina D.
AU  - Romčević, Maja J.
AU  - Romčević, Nebojša
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9904
AB  - In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top – down approach) and Solution Combustion Synthesis (bottom – up approach). For starting structural characterization, X – Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV–Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far – Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi – phonon processes which alter the reflection spectra of bulk YVO4. The influence of Eu ions is reflected through multi – phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.
T2  - Physica E: Low-dimensional Systems and Nanostructures
T1  - Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders
VL  - 134
SP  - 114923
DO  - 10.1016/j.physe.2021.114923
ER  - 
@article{
author = "Mitrić, Jelena and Paunović, Novica M. and Mitrić, Miodrag and Ćirković, Jovana and Gilić, Martina D. and Romčević, Maja J. and Romčević, Nebojša",
year = "2021",
abstract = "In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top – down approach) and Solution Combustion Synthesis (bottom – up approach). For starting structural characterization, X – Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV–Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far – Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi – phonon processes which alter the reflection spectra of bulk YVO4. The influence of Eu ions is reflected through multi – phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.",
journal = "Physica E: Low-dimensional Systems and Nanostructures",
title = "Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders",
volume = "134",
pages = "114923",
doi = "10.1016/j.physe.2021.114923"
}
Mitrić, J., Paunović, N. M., Mitrić, M., Ćirković, J., Gilić, M. D., Romčević, M. J.,& Romčević, N.. (2021). Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders. in Physica E: Low-dimensional Systems and Nanostructures, 134, 114923.
https://doi.org/10.1016/j.physe.2021.114923
Mitrić J, Paunović NM, Mitrić M, Ćirković J, Gilić MD, Romčević MJ, Romčević N. Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders. in Physica E: Low-dimensional Systems and Nanostructures. 2021;134:114923.
doi:10.1016/j.physe.2021.114923 .
Mitrić, Jelena, Paunović, Novica M., Mitrić, Miodrag, Ćirković, Jovana, Gilić, Martina D., Romčević, Maja J., Romčević, Nebojša, "Surface optical phonon and multi – phonon transitions in YVO4:Eu3+ nanopowders" in Physica E: Low-dimensional Systems and Nanostructures, 134 (2021):114923,
https://doi.org/10.1016/j.physe.2021.114923 . .
1

Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study

Dragojlović, Milijana; Milanović, Igor; Gradišek, Anton; Kurko, Sandra V.; Mitrić, Miodrag; Umićević, Ana; Radaković, Jana; Batalović, Katarina

(2021)

TY  - JOUR
AU  - Dragojlović, Milijana
AU  - Milanović, Igor
AU  - Gradišek, Anton
AU  - Kurko, Sandra V.
AU  - Mitrić, Miodrag
AU  - Umićević, Ana
AU  - Radaković, Jana
AU  - Batalović, Katarina
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9091
AB  - LiAlH4 is a promising material for hydrogen storage, having the theoretical gravimetric density of 10.6 wt% H2. In order to decrease the temperature where hydrogen is released, we investigated the catalytic influence of Fe2O3 on LiAlH4 dehydrogenation, as a model case for understanding the effects transition oxide additives have in the catalysis process. Quick mechanochemical synthesis of LiAlH4 + 5 wt% Fe2O3 led to the significant decrease of the hydrogen desorption temperature, and desorption of over 7 wt%H2 in the temperature range 143–154 °C. Density functional theory (DFT)-based calculations with Tran-Blaha modified Becke-Johnson functional (TBmBJ) address the electronic structure of LiAlH4 and Li3AlH6. 57Fe Mössbauer study shows the change in the oxidational state of iron during hydrogen desorption, while the 1H NMR study reveals the presence of paramagnetic species that affect relaxation. The electron transfer from hydrides is discussed as the proposed mechanism of destabilization of LiAlH4 + 5 wt% Fe2O3. © 2021 Hydrogen Energy Publications LLC
T2  - International Journal of Hydrogen Energy
T1  - Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study
VL  - 46
IS  - 24
SP  - 13070
EP  - 13081
DO  - 10.1016/j.ijhydene.2021.01.086
ER  - 
@article{
author = "Dragojlović, Milijana and Milanović, Igor and Gradišek, Anton and Kurko, Sandra V. and Mitrić, Miodrag and Umićević, Ana and Radaković, Jana and Batalović, Katarina",
year = "2021",
abstract = "LiAlH4 is a promising material for hydrogen storage, having the theoretical gravimetric density of 10.6 wt% H2. In order to decrease the temperature where hydrogen is released, we investigated the catalytic influence of Fe2O3 on LiAlH4 dehydrogenation, as a model case for understanding the effects transition oxide additives have in the catalysis process. Quick mechanochemical synthesis of LiAlH4 + 5 wt% Fe2O3 led to the significant decrease of the hydrogen desorption temperature, and desorption of over 7 wt%H2 in the temperature range 143–154 °C. Density functional theory (DFT)-based calculations with Tran-Blaha modified Becke-Johnson functional (TBmBJ) address the electronic structure of LiAlH4 and Li3AlH6. 57Fe Mössbauer study shows the change in the oxidational state of iron during hydrogen desorption, while the 1H NMR study reveals the presence of paramagnetic species that affect relaxation. The electron transfer from hydrides is discussed as the proposed mechanism of destabilization of LiAlH4 + 5 wt% Fe2O3. © 2021 Hydrogen Energy Publications LLC",
journal = "International Journal of Hydrogen Energy",
title = "Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study",
volume = "46",
number = "24",
pages = "13070-13081",
doi = "10.1016/j.ijhydene.2021.01.086"
}
Dragojlović, M., Milanović, I., Gradišek, A., Kurko, S. V., Mitrić, M., Umićević, A., Radaković, J.,& Batalović, K.. (2021). Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study. in International Journal of Hydrogen Energy, 46(24), 13070-13081.
https://doi.org/10.1016/j.ijhydene.2021.01.086
Dragojlović M, Milanović I, Gradišek A, Kurko SV, Mitrić M, Umićević A, Radaković J, Batalović K. Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study. in International Journal of Hydrogen Energy. 2021;46(24):13070-13081.
doi:10.1016/j.ijhydene.2021.01.086 .
Dragojlović, Milijana, Milanović, Igor, Gradišek, Anton, Kurko, Sandra V., Mitrić, Miodrag, Umićević, Ana, Radaković, Jana, Batalović, Katarina, "Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study" in International Journal of Hydrogen Energy, 46, no. 24 (2021):13070-13081,
https://doi.org/10.1016/j.ijhydene.2021.01.086 . .
4
1
4

Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study

Dragojlović, Milijana; Milanović, Igor; Gradišek, Anton; Kurko, Sandra V.; Mitrić, Miodrag; Umićević, Ana; Radaković, Jana; Batalović, Katarina

(2021)

TY  - JOUR
AU  - Dragojlović, Milijana
AU  - Milanović, Igor
AU  - Gradišek, Anton
AU  - Kurko, Sandra V.
AU  - Mitrić, Miodrag
AU  - Umićević, Ana
AU  - Radaković, Jana
AU  - Batalović, Katarina
PY  - 2021
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9087
AB  - LiAlH4 is a promising material for hydrogen storage, having the theoretical gravimetric density of 10.6 wt% H2. In order to decrease the temperature where hydrogen is released, we investigated the catalytic influence of Fe2O3 on LiAlH4 dehydrogenation, as a model case for understanding the effects transition oxide additives have in the catalysis process. Quick mechanochemical synthesis of LiAlH4 + 5 wt% Fe2O3 led to the significant decrease of the hydrogen desorption temperature, and desorption of over 7 wt%H2 in the temperature range 143–154 °C. Density functional theory (DFT)-based calculations with Tran-Blaha modified Becke-Johnson functional (TBmBJ) address the electronic structure of LiAlH4 and Li3AlH6. 57Fe Mössbauer study shows the change in the oxidational state of iron during hydrogen desorption, while the 1H NMR study reveals the presence of paramagnetic species that affect relaxation. The electron transfer from hydrides is discussed as the proposed mechanism of destabilization of LiAlH4 + 5 wt% Fe2O3. © 2021 Hydrogen Energy Publications LLC
T2  - International Journal of Hydrogen Energy
T1  - Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study
VL  - 46
IS  - 24
SP  - 13070
EP  - 13081
DO  - 10.1016/j.ijhydene.2021.01.086
ER  - 
@article{
author = "Dragojlović, Milijana and Milanović, Igor and Gradišek, Anton and Kurko, Sandra V. and Mitrić, Miodrag and Umićević, Ana and Radaković, Jana and Batalović, Katarina",
year = "2021",
abstract = "LiAlH4 is a promising material for hydrogen storage, having the theoretical gravimetric density of 10.6 wt% H2. In order to decrease the temperature where hydrogen is released, we investigated the catalytic influence of Fe2O3 on LiAlH4 dehydrogenation, as a model case for understanding the effects transition oxide additives have in the catalysis process. Quick mechanochemical synthesis of LiAlH4 + 5 wt% Fe2O3 led to the significant decrease of the hydrogen desorption temperature, and desorption of over 7 wt%H2 in the temperature range 143–154 °C. Density functional theory (DFT)-based calculations with Tran-Blaha modified Becke-Johnson functional (TBmBJ) address the electronic structure of LiAlH4 and Li3AlH6. 57Fe Mössbauer study shows the change in the oxidational state of iron during hydrogen desorption, while the 1H NMR study reveals the presence of paramagnetic species that affect relaxation. The electron transfer from hydrides is discussed as the proposed mechanism of destabilization of LiAlH4 + 5 wt% Fe2O3. © 2021 Hydrogen Energy Publications LLC",
journal = "International Journal of Hydrogen Energy",
title = "Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study",
volume = "46",
number = "24",
pages = "13070-13081",
doi = "10.1016/j.ijhydene.2021.01.086"
}
Dragojlović, M., Milanović, I., Gradišek, A., Kurko, S. V., Mitrić, M., Umićević, A., Radaković, J.,& Batalović, K.. (2021). Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study. in International Journal of Hydrogen Energy, 46(24), 13070-13081.
https://doi.org/10.1016/j.ijhydene.2021.01.086
Dragojlović M, Milanović I, Gradišek A, Kurko SV, Mitrić M, Umićević A, Radaković J, Batalović K. Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study. in International Journal of Hydrogen Energy. 2021;46(24):13070-13081.
doi:10.1016/j.ijhydene.2021.01.086 .
Dragojlović, Milijana, Milanović, Igor, Gradišek, Anton, Kurko, Sandra V., Mitrić, Miodrag, Umićević, Ana, Radaković, Jana, Batalović, Katarina, "Mechanochemical modification of LiAlH4 with Fe2O3 - A combined DFT and experimental study" in International Journal of Hydrogen Energy, 46, no. 24 (2021):13070-13081,
https://doi.org/10.1016/j.ijhydene.2021.01.086 . .
4
1
4

The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions

Marković, Darka; Vasiljević, Jelena; Ašanin, Jelena; Ilić‐Tomić, Tatjana; Tomšič, Brigita; Jokić, Bojan M.; Mitrić, Miodrag; Simončič, Barbara; Mišić, Dušan; Radetić, Maja M.

(2020)

TY  - JOUR
AU  - Marković, Darka
AU  - Vasiljević, Jelena
AU  - Ašanin, Jelena
AU  - Ilić‐Tomić, Tatjana
AU  - Tomšič, Brigita
AU  - Jokić, Bojan M.
AU  - Mitrić, Miodrag
AU  - Simončič, Barbara
AU  - Mišić, Dušan
AU  - Radetić, Maja M.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8844
AB  - A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics-resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3-aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu2O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu2O NPs was based on the adsorption of Cu2+-ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu2+-ions are subsequently reduced in the alkaline solution of NaBH4. X-ray diffraction measurements confirmed the formation of CuO/Cu2O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO4 solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram-negative Escherichia coli ATCC 25922, E. coli ATCC BAA 2469, and Klebsiella pneumoniae ATCC BAA 2146, and Gram-positive bacteria Staphylococcus aureus ATCC 25923, S. aureus ATCC 43300 and yeast Candida albicans ATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu2+-ions from the fabrics into physiological saline solution was obtained. © 2020 Wiley Periodicals, Inc.
T2  - Journal of Applied Polymer Science
T1  - The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions
VL  - 137
IS  - 40
SP  - 49194
DO  - 10.1002/app.49194
ER  - 
@article{
author = "Marković, Darka and Vasiljević, Jelena and Ašanin, Jelena and Ilić‐Tomić, Tatjana and Tomšič, Brigita and Jokić, Bojan M. and Mitrić, Miodrag and Simončič, Barbara and Mišić, Dušan and Radetić, Maja M.",
year = "2020",
abstract = "A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics-resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3-aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu2O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu2O NPs was based on the adsorption of Cu2+-ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu2+-ions are subsequently reduced in the alkaline solution of NaBH4. X-ray diffraction measurements confirmed the formation of CuO/Cu2O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO4 solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram-negative Escherichia coli ATCC 25922, E. coli ATCC BAA 2469, and Klebsiella pneumoniae ATCC BAA 2146, and Gram-positive bacteria Staphylococcus aureus ATCC 25923, S. aureus ATCC 43300 and yeast Candida albicans ATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu2+-ions from the fabrics into physiological saline solution was obtained. © 2020 Wiley Periodicals, Inc.",
journal = "Journal of Applied Polymer Science",
title = "The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions",
volume = "137",
number = "40",
pages = "49194",
doi = "10.1002/app.49194"
}
Marković, D., Vasiljević, J., Ašanin, J., Ilić‐Tomić, T., Tomšič, B., Jokić, B. M., Mitrić, M., Simončič, B., Mišić, D.,& Radetić, M. M.. (2020). The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions. in Journal of Applied Polymer Science, 137(40), 49194.
https://doi.org/10.1002/app.49194
Marković D, Vasiljević J, Ašanin J, Ilić‐Tomić T, Tomšič B, Jokić BM, Mitrić M, Simončič B, Mišić D, Radetić MM. The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions. in Journal of Applied Polymer Science. 2020;137(40):49194.
doi:10.1002/app.49194 .
Marković, Darka, Vasiljević, Jelena, Ašanin, Jelena, Ilić‐Tomić, Tatjana, Tomšič, Brigita, Jokić, Bojan M., Mitrić, Miodrag, Simončič, Barbara, Mišić, Dušan, Radetić, Maja M., "The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions" in Journal of Applied Polymer Science, 137, no. 40 (2020):49194,
https://doi.org/10.1002/app.49194 . .
10
4
9

Comparison of Three Ratiometric Temperature Readings from the Er3+ Upconversion Emission

Ćirić, Aleksandar; Aleksić, Jelena; Barudžija, Tanja; Antić, Željka; Đorđević, Vesna R.; Medić, Mina M.; Periša, Jovana; Zeković, Ivana Lj.; Mitrić, Miodrag; Dramićanin, Miroslav

(2020)

TY  - JOUR
AU  - Ćirić, Aleksandar
AU  - Aleksić, Jelena
AU  - Barudžija, Tanja
AU  - Antić, Željka
AU  - Đorđević, Vesna R.
AU  - Medić, Mina M.
AU  - Periša, Jovana
AU  - Zeković, Ivana Lj.
AU  - Mitrić, Miodrag
AU  - Dramićanin, Miroslav
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8938
AB  - The emission of Er3+ provides three combinations of emission bands suitable for ratiometric luminescence thermometry. Two combinations utilize ratios of visible emissions (2H11/2→4I15/2 at 523 nm/ 4S3/2→4I15/2 at 542 nm and 4F7/2→4I15/2 at 485 nm/ 4S3/2→4I15/2 at 545 nm), while emissions from the third combination are located in near-infrared, e.g., in the first biological window (2H11/2→4I13/2 at 793 nm/ 4S3/2→4I13/2 at 840 nm). Herein, we aimed to compare thermometric performances of these three different ratiometric readouts on account of their relative sensitivities, resolutions, and repeatability of measurements. For this aim, we prepared Yb3+,Er3+:YF3 nanopowders by oxide fluorination. The structure of the materials was confirmed by X-ray diffraction analysis and particle morphology was evaluated from FE-SEM measurements. Upconversion emission spectra were measured over the 293–473 K range upon excitation by 980 nm radiation. The obtained relative sensitivities on temperature for 523/542, 485/542, and 793/840 emission intensity ratios were 1.06 ± 0.02, 2.03 ± 0.23, and 0.98 ± 0.10%K−1 with temperature resolutions of 0.3, 0.7, and 1.8 K, respectively. The study showed that the higher relative temperature sensitivity does not necessarily lead to the more precise temperature measurement and better resolution, since it may be compromised by a larger uncertainty in measurement of low-intensity emission bands.
T2  - Nanomaterials
T1  - Comparison of Three Ratiometric Temperature Readings from the Er3+ Upconversion Emission
VL  - 10
IS  - 4
SP  - 627
DO  - 10.3390/nano10040627
ER  - 
@article{
author = "Ćirić, Aleksandar and Aleksić, Jelena and Barudžija, Tanja and Antić, Željka and Đorđević, Vesna R. and Medić, Mina M. and Periša, Jovana and Zeković, Ivana Lj. and Mitrić, Miodrag and Dramićanin, Miroslav",
year = "2020",
abstract = "The emission of Er3+ provides three combinations of emission bands suitable for ratiometric luminescence thermometry. Two combinations utilize ratios of visible emissions (2H11/2→4I15/2 at 523 nm/ 4S3/2→4I15/2 at 542 nm and 4F7/2→4I15/2 at 485 nm/ 4S3/2→4I15/2 at 545 nm), while emissions from the third combination are located in near-infrared, e.g., in the first biological window (2H11/2→4I13/2 at 793 nm/ 4S3/2→4I13/2 at 840 nm). Herein, we aimed to compare thermometric performances of these three different ratiometric readouts on account of their relative sensitivities, resolutions, and repeatability of measurements. For this aim, we prepared Yb3+,Er3+:YF3 nanopowders by oxide fluorination. The structure of the materials was confirmed by X-ray diffraction analysis and particle morphology was evaluated from FE-SEM measurements. Upconversion emission spectra were measured over the 293–473 K range upon excitation by 980 nm radiation. The obtained relative sensitivities on temperature for 523/542, 485/542, and 793/840 emission intensity ratios were 1.06 ± 0.02, 2.03 ± 0.23, and 0.98 ± 0.10%K−1 with temperature resolutions of 0.3, 0.7, and 1.8 K, respectively. The study showed that the higher relative temperature sensitivity does not necessarily lead to the more precise temperature measurement and better resolution, since it may be compromised by a larger uncertainty in measurement of low-intensity emission bands.",
journal = "Nanomaterials",
title = "Comparison of Three Ratiometric Temperature Readings from the Er3+ Upconversion Emission",
volume = "10",
number = "4",
pages = "627",
doi = "10.3390/nano10040627"
}
Ćirić, A., Aleksić, J., Barudžija, T., Antić, Ž., Đorđević, V. R., Medić, M. M., Periša, J., Zeković, I. Lj., Mitrić, M.,& Dramićanin, M.. (2020). Comparison of Three Ratiometric Temperature Readings from the Er3+ Upconversion Emission. in Nanomaterials, 10(4), 627.
https://doi.org/10.3390/nano10040627
Ćirić A, Aleksić J, Barudžija T, Antić Ž, Đorđević VR, Medić MM, Periša J, Zeković IL, Mitrić M, Dramićanin M. Comparison of Three Ratiometric Temperature Readings from the Er3+ Upconversion Emission. in Nanomaterials. 2020;10(4):627.
doi:10.3390/nano10040627 .
Ćirić, Aleksandar, Aleksić, Jelena, Barudžija, Tanja, Antić, Željka, Đorđević, Vesna R., Medić, Mina M., Periša, Jovana, Zeković, Ivana Lj., Mitrić, Miodrag, Dramićanin, Miroslav, "Comparison of Three Ratiometric Temperature Readings from the Er3+ Upconversion Emission" in Nanomaterials, 10, no. 4 (2020):627,
https://doi.org/10.3390/nano10040627 . .
31
20
27

Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods

Barudžija, Tanja; Perović, Marija M.; Bošković, Marko; Cvjetićanin, Nikola; Gyergyek, Sašo; Mitrić, Miodrag

(2020)

TY  - JOUR
AU  - Barudžija, Tanja
AU  - Perović, Marija M.
AU  - Bošković, Marko
AU  - Cvjetićanin, Nikola
AU  - Gyergyek, Sašo
AU  - Mitrić, Miodrag
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8743
AB  - Memory effect due to spin-glass state below about 20 K has been illustrated in the hollandite-type α-KxMnO2 monocrystalline nanorods by systematic magnetization measurements including temperature- and time-dependent magnetization curves in low fields. In this work, we succeeded in writing, reading, and deleting 8-bits digital information in the investigated system. These results show that α-KxMnO2 is a good candidate material for a thermal memory cell. The phenomenological droplet model was used in the description of the observed memory effect, whose origin in α-KxMnO2 is associated with bulk properties, doping and frustration. © 2019 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods
VL  - 820
SP  - 153406
DO  - 10.1016/j.jallcom.2019.153406
ER  - 
@article{
author = "Barudžija, Tanja and Perović, Marija M. and Bošković, Marko and Cvjetićanin, Nikola and Gyergyek, Sašo and Mitrić, Miodrag",
year = "2020",
abstract = "Memory effect due to spin-glass state below about 20 K has been illustrated in the hollandite-type α-KxMnO2 monocrystalline nanorods by systematic magnetization measurements including temperature- and time-dependent magnetization curves in low fields. In this work, we succeeded in writing, reading, and deleting 8-bits digital information in the investigated system. These results show that α-KxMnO2 is a good candidate material for a thermal memory cell. The phenomenological droplet model was used in the description of the observed memory effect, whose origin in α-KxMnO2 is associated with bulk properties, doping and frustration. © 2019 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods",
volume = "820",
pages = "153406",
doi = "10.1016/j.jallcom.2019.153406"
}
Barudžija, T., Perović, M. M., Bošković, M., Cvjetićanin, N., Gyergyek, S.,& Mitrić, M.. (2020). Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods. in Journal of Alloys and Compounds, 820, 153406.
https://doi.org/10.1016/j.jallcom.2019.153406
Barudžija T, Perović MM, Bošković M, Cvjetićanin N, Gyergyek S, Mitrić M. Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods. in Journal of Alloys and Compounds. 2020;820:153406.
doi:10.1016/j.jallcom.2019.153406 .
Barudžija, Tanja, Perović, Marija M., Bošković, Marko, Cvjetićanin, Nikola, Gyergyek, Sašo, Mitrić, Miodrag, "Magnetic memory effect in hollandite-type α-K MnO2 monocrystalline nanorods" in Journal of Alloys and Compounds, 820 (2020):153406,
https://doi.org/10.1016/j.jallcom.2019.153406 . .
3
2
3

Highly Active Rutile TiO2 Nanocrystalline Photocatalysts

Đokić, Veljko R.; Marinković, Aleksandar D.; Petrović, Rada D.; Ersen, Ovidiu; Zafeiratos, Spyridon; Mitrić, Miodrag; Ophus, Colin; Radmilović, Velimir R.; Janaćković, Đorđe T.

(2020)

TY  - JOUR
AU  - Đokić, Veljko R.
AU  - Marinković, Aleksandar D.
AU  - Petrović, Rada D.
AU  - Ersen, Ovidiu
AU  - Zafeiratos, Spyridon
AU  - Mitrić, Miodrag
AU  - Ophus, Colin
AU  - Radmilović, Velimir R.
AU  - Janaćković, Đorđe T.
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/9106
AB  - The controllable synthesis of rutile TiO2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO2 nanorod crystals (RTiO2NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO2NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H2O2 ratio. The thus obtained RTiO2NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO2NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO2-based photocatalysts.
T2  - ACS Applied Materials & Interfaces
T1  - Highly Active Rutile TiO2 Nanocrystalline Photocatalysts
VL  - 12
IS  - 29
SP  - 33058
EP  - 33068
DO  - 10.1021/acsami.0c03150
ER  - 
@article{
author = "Đokić, Veljko R. and Marinković, Aleksandar D. and Petrović, Rada D. and Ersen, Ovidiu and Zafeiratos, Spyridon and Mitrić, Miodrag and Ophus, Colin and Radmilović, Velimir R. and Janaćković, Đorđe T.",
year = "2020",
abstract = "The controllable synthesis of rutile TiO2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO2 nanorod crystals (RTiO2NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO2NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H2O2 ratio. The thus obtained RTiO2NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO2NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO2-based photocatalysts.",
journal = "ACS Applied Materials & Interfaces",
title = "Highly Active Rutile TiO2 Nanocrystalline Photocatalysts",
volume = "12",
number = "29",
pages = "33058-33068",
doi = "10.1021/acsami.0c03150"
}
Đokić, V. R., Marinković, A. D., Petrović, R. D., Ersen, O., Zafeiratos, S., Mitrić, M., Ophus, C., Radmilović, V. R.,& Janaćković, Đ. T.. (2020). Highly Active Rutile TiO2 Nanocrystalline Photocatalysts. in ACS Applied Materials & Interfaces, 12(29), 33058-33068.
https://doi.org/10.1021/acsami.0c03150
Đokić VR, Marinković AD, Petrović RD, Ersen O, Zafeiratos S, Mitrić M, Ophus C, Radmilović VR, Janaćković ĐT. Highly Active Rutile TiO2 Nanocrystalline Photocatalysts. in ACS Applied Materials & Interfaces. 2020;12(29):33058-33068.
doi:10.1021/acsami.0c03150 .
Đokić, Veljko R., Marinković, Aleksandar D., Petrović, Rada D., Ersen, Ovidiu, Zafeiratos, Spyridon, Mitrić, Miodrag, Ophus, Colin, Radmilović, Velimir R., Janaćković, Đorđe T., "Highly Active Rutile TiO2 Nanocrystalline Photocatalysts" in ACS Applied Materials & Interfaces, 12, no. 29 (2020):33058-33068,
https://doi.org/10.1021/acsami.0c03150 . .
1
17
14
16

Study of chitosan/xanthan gum polyelectrolyte complexes formation, solid state and influence on ibuprofen release kinetics

Ćirić, Ana; Medarević, Đorđe ; Čalija, Bojan; Dobričić, Vladimir; Mitrić, Miodrag; Đekić, Ljiljana

(2020)

TY  - JOUR
AU  - Ćirić, Ana
AU  - Medarević, Đorđe 
AU  - Čalija, Bojan
AU  - Dobričić, Vladimir
AU  - Mitrić, Miodrag
AU  - Đekić, Ljiljana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8473
AB  - This study investigated the combined influence of pH adjusting agent type (hydrochloric, acetic or lactic acid) and initial pH value (3.6, 4.6, and 5.6) on formation of biocompatible chitosan/xanthan polyelectrolyte complexes (PECs), their characteristics in solid state and influence on in vitro ibuprofen release kinetics. Conductivity measurements and rheological characterization revealed generally higher extent of ionic interactions in PEC dispersions comprising acetic acid and at pH 3.6. Acid type and pH affected significantly the yield and particle size (100–250 μm) of the dried PECs. Differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and powder X-ray diffraction (PXRD) analysis of the solid PECs confirmed exclusively physical (ionic, hydrogen bonds) interactions between chitosan and xanthan gum. PECs prepared with acetic acid at pH 4.6 and 5.6 had enhanced rehydration ability in phosphate buffer pH 7.2, and at PEC-to-drug mass ratio up to 1:2, enabled extended ibuprofen release from hard capsules during 10 h. © 2020 Elsevier B.V.
T2  - International Journal of Biological Macromolecules
T1  - Study of chitosan/xanthan gum polyelectrolyte complexes formation, solid state and influence on ibuprofen release kinetics
VL  - 148
SP  - 942
EP  - 955
DO  - 10.1016/j.ijbiomac.2020.01.138
ER  - 
@article{
author = "Ćirić, Ana and Medarević, Đorđe  and Čalija, Bojan and Dobričić, Vladimir and Mitrić, Miodrag and Đekić, Ljiljana",
year = "2020",
abstract = "This study investigated the combined influence of pH adjusting agent type (hydrochloric, acetic or lactic acid) and initial pH value (3.6, 4.6, and 5.6) on formation of biocompatible chitosan/xanthan polyelectrolyte complexes (PECs), their characteristics in solid state and influence on in vitro ibuprofen release kinetics. Conductivity measurements and rheological characterization revealed generally higher extent of ionic interactions in PEC dispersions comprising acetic acid and at pH 3.6. Acid type and pH affected significantly the yield and particle size (100–250 μm) of the dried PECs. Differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and powder X-ray diffraction (PXRD) analysis of the solid PECs confirmed exclusively physical (ionic, hydrogen bonds) interactions between chitosan and xanthan gum. PECs prepared with acetic acid at pH 4.6 and 5.6 had enhanced rehydration ability in phosphate buffer pH 7.2, and at PEC-to-drug mass ratio up to 1:2, enabled extended ibuprofen release from hard capsules during 10 h. © 2020 Elsevier B.V.",
journal = "International Journal of Biological Macromolecules",
title = "Study of chitosan/xanthan gum polyelectrolyte complexes formation, solid state and influence on ibuprofen release kinetics",
volume = "148",
pages = "942-955",
doi = "10.1016/j.ijbiomac.2020.01.138"
}
Ćirić, A., Medarević, Đ., Čalija, B., Dobričić, V., Mitrić, M.,& Đekić, L.. (2020). Study of chitosan/xanthan gum polyelectrolyte complexes formation, solid state and influence on ibuprofen release kinetics. in International Journal of Biological Macromolecules, 148, 942-955.
https://doi.org/10.1016/j.ijbiomac.2020.01.138
Ćirić A, Medarević Đ, Čalija B, Dobričić V, Mitrić M, Đekić L. Study of chitosan/xanthan gum polyelectrolyte complexes formation, solid state and influence on ibuprofen release kinetics. in International Journal of Biological Macromolecules. 2020;148:942-955.
doi:10.1016/j.ijbiomac.2020.01.138 .
Ćirić, Ana, Medarević, Đorđe , Čalija, Bojan, Dobričić, Vladimir, Mitrić, Miodrag, Đekić, Ljiljana, "Study of chitosan/xanthan gum polyelectrolyte complexes formation, solid state and influence on ibuprofen release kinetics" in International Journal of Biological Macromolecules, 148 (2020):942-955,
https://doi.org/10.1016/j.ijbiomac.2020.01.138 . .
28
19
26

Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation

Savić, Tatjana D.; Carević, Milica V.; Mitrić, Miodrag; Kuljanin-Jakovljević, Jadranka Ž.; Abazović, Nadica; Čomor, Mirjana

(2020)

TY  - JOUR
AU  - Savić, Tatjana D.
AU  - Carević, Milica V.
AU  - Mitrić, Miodrag
AU  - Kuljanin-Jakovljević, Jadranka Ž.
AU  - Abazović, Nadica
AU  - Čomor, Mirjana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8617
AB  - Hexagonal ZnIn2S4 is synthesized by simple and low-cost hydrothermal route. TEM images revealed formation of nanosheets. The estimated band-gap energy of synthesized sample is in the visible spectral region and has a value of about 2.25 eV. Photocatalytic properties of synthesized sample are probed in photocatalytic degradation of three selected dyes different in nature and structure, Rhodamine B (RhB), Methylene blue (MB) and Methyl orange (MO), under the illumination with simulated Solar light. Obtained results revealed that photocatalytic degradation of RhB and MO is mainly result of synergic effect of photogenerated holes and oxygen, while primary effect in ZnIn2S4/MB system is bleaching of the dye, but no photodegradation was observed. © 2019 Elsevier B.V.
T2  - Journal of Photochemistry and Photobiology A: Chemistry
T1  - Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation
VL  - 388
SP  - 112154
DO  - 10.1016/j.jphotochem.2019.112154
ER  - 
@article{
author = "Savić, Tatjana D. and Carević, Milica V. and Mitrić, Miodrag and Kuljanin-Jakovljević, Jadranka Ž. and Abazović, Nadica and Čomor, Mirjana",
year = "2020",
abstract = "Hexagonal ZnIn2S4 is synthesized by simple and low-cost hydrothermal route. TEM images revealed formation of nanosheets. The estimated band-gap energy of synthesized sample is in the visible spectral region and has a value of about 2.25 eV. Photocatalytic properties of synthesized sample are probed in photocatalytic degradation of three selected dyes different in nature and structure, Rhodamine B (RhB), Methylene blue (MB) and Methyl orange (MO), under the illumination with simulated Solar light. Obtained results revealed that photocatalytic degradation of RhB and MO is mainly result of synergic effect of photogenerated holes and oxygen, while primary effect in ZnIn2S4/MB system is bleaching of the dye, but no photodegradation was observed. © 2019 Elsevier B.V.",
journal = "Journal of Photochemistry and Photobiology A: Chemistry",
title = "Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation",
volume = "388",
pages = "112154",
doi = "10.1016/j.jphotochem.2019.112154"
}
Savić, T. D., Carević, M. V., Mitrić, M., Kuljanin-Jakovljević, J. Ž., Abazović, N.,& Čomor, M.. (2020). Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation. in Journal of Photochemistry and Photobiology A: Chemistry, 388, 112154.
https://doi.org/10.1016/j.jphotochem.2019.112154
Savić TD, Carević MV, Mitrić M, Kuljanin-Jakovljević JŽ, Abazović N, Čomor M. Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation. in Journal of Photochemistry and Photobiology A: Chemistry. 2020;388:112154.
doi:10.1016/j.jphotochem.2019.112154 .
Savić, Tatjana D., Carević, Milica V., Mitrić, Miodrag, Kuljanin-Jakovljević, Jadranka Ž., Abazović, Nadica, Čomor, Mirjana, "Simulated solar light driven performance of nanosized ZnIn2S4/dye system: decolourization vs. photodegradation" in Journal of Photochemistry and Photobiology A: Chemistry, 388 (2020):112154,
https://doi.org/10.1016/j.jphotochem.2019.112154 . .
2
3
3

Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions

Aleksić, Jelena; Barudžija, Tanja; Jugović, Dragana; Mitrić, Miodrag; Bošković, Marko; Jagličić, Zvonko; Lisjak, Darja; Kostić, Ljiljana

(2020)

TY  - JOUR
AU  - Aleksić, Jelena
AU  - Barudžija, Tanja
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Bošković, Marko
AU  - Jagličić, Zvonko
AU  - Lisjak, Darja
AU  - Kostić, Ljiljana
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8858
AB  - In this investigation, we have synthesized YbxY1-xF3 solid solutions by fluorination of yttrium and ytterbium sesquioxides with ammonium hydrogen difluoride. According to the XRD analysis, all synthesized YbxY1-xF3 samples have an orthorhombic crystal structure belonging to the β-YF3 structural type. The refinement of crystal structure was done by the Rietveld method within the Pnma space group using the TCH pseudo-Voigt function. The anisotropic peak broadening was analyzed, and the average apparent crystallite size is about 50 nm with a small anisotropy of shape, while the significant microstrain that is highly anisotropic is present in all samples. The temperature-dependent magnetic susceptibility was analyzed by applying the model of a free ion perturbed by the crystal field. We have obtained the effective magnetic quantum numbers Mieff of four Kramer's doublets of Yb3+ ion along with the entire crystal field splitting of the 2F7/2 manifold of Yb3+ in YF3. The acquired maximum energy splitting of the ground level is about 150 K in our most diluted samples. The field-dependent isothermal magnetization measurements were carried out at various temperatures and analyzed by classical Langevin function. Results obtained from magnetic measurements show that all YbxY1-xF3 (x ≠ 0) solid solutions exhibit pure paramagnetic behavior in the whole temperature range from 2 to 300 K, with a predominant antiferromagnetic exchange interactions. © 2020 Elsevier Ltd
T2  - Journal of Physics and Chemistry of Solids
T1  - Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions
VL  - 142
SP  - 109449
DO  - 10.1016/j.jpcs.2020.109449
ER  - 
@article{
author = "Aleksić, Jelena and Barudžija, Tanja and Jugović, Dragana and Mitrić, Miodrag and Bošković, Marko and Jagličić, Zvonko and Lisjak, Darja and Kostić, Ljiljana",
year = "2020",
abstract = "In this investigation, we have synthesized YbxY1-xF3 solid solutions by fluorination of yttrium and ytterbium sesquioxides with ammonium hydrogen difluoride. According to the XRD analysis, all synthesized YbxY1-xF3 samples have an orthorhombic crystal structure belonging to the β-YF3 structural type. The refinement of crystal structure was done by the Rietveld method within the Pnma space group using the TCH pseudo-Voigt function. The anisotropic peak broadening was analyzed, and the average apparent crystallite size is about 50 nm with a small anisotropy of shape, while the significant microstrain that is highly anisotropic is present in all samples. The temperature-dependent magnetic susceptibility was analyzed by applying the model of a free ion perturbed by the crystal field. We have obtained the effective magnetic quantum numbers Mieff of four Kramer's doublets of Yb3+ ion along with the entire crystal field splitting of the 2F7/2 manifold of Yb3+ in YF3. The acquired maximum energy splitting of the ground level is about 150 K in our most diluted samples. The field-dependent isothermal magnetization measurements were carried out at various temperatures and analyzed by classical Langevin function. Results obtained from magnetic measurements show that all YbxY1-xF3 (x ≠ 0) solid solutions exhibit pure paramagnetic behavior in the whole temperature range from 2 to 300 K, with a predominant antiferromagnetic exchange interactions. © 2020 Elsevier Ltd",
journal = "Journal of Physics and Chemistry of Solids",
title = "Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions",
volume = "142",
pages = "109449",
doi = "10.1016/j.jpcs.2020.109449"
}
Aleksić, J., Barudžija, T., Jugović, D., Mitrić, M., Bošković, M., Jagličić, Z., Lisjak, D.,& Kostić, L.. (2020). Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions. in Journal of Physics and Chemistry of Solids, 142, 109449.
https://doi.org/10.1016/j.jpcs.2020.109449
Aleksić J, Barudžija T, Jugović D, Mitrić M, Bošković M, Jagličić Z, Lisjak D, Kostić L. Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions. in Journal of Physics and Chemistry of Solids. 2020;142:109449.
doi:10.1016/j.jpcs.2020.109449 .
Aleksić, Jelena, Barudžija, Tanja, Jugović, Dragana, Mitrić, Miodrag, Bošković, Marko, Jagličić, Zvonko, Lisjak, Darja, Kostić, Ljiljana, "Investigation of structural, microstructural and magnetic properties of Yb Y1-F3 solid solutions" in Journal of Physics and Chemistry of Solids, 142 (2020):109449,
https://doi.org/10.1016/j.jpcs.2020.109449 . .
1

Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling

Medarević, Đorđe; Ibrić, Svetlana; Vardaka, Elisavet; Mitrić, Miodrag; Nikolakakis, Ioannis; Kachrimanis, Kyriakos

(2020)

TY  - JOUR
AU  - Medarević, Đorđe
AU  - Ibrić, Svetlana
AU  - Vardaka, Elisavet
AU  - Mitrić, Miodrag
AU  - Nikolakakis, Ioannis
AU  - Kachrimanis, Kyriakos
PY  - 2020
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8803
AB  - Nanocrystal formation for the dissolution enhancement of glimepiride was attempted by wet media milling. Different stabilizers were tested and the obtained nanosuspensions were solidified by spray drying in presence of mannitol, and characterized regarding their redispersibility by dynamic light scattering, physicochemical properties by differential scanning calorimetry (DSC), FT-IR spectroscopy, powder X-ray diffraction (PXRD), and scanning electron microcopy (SEM), as well as dissolution rate. Lattice energy frameworks combined with topology analysis were used in order to gain insight into the mechanisms of particle fracture. It was found that nanosuspensions with narrow size distribution can be obtained in presence of poloxamer 188, HPC-SL and Pharmacoat® 603 stabilizers, with poloxamer giving poor redispersibility due to melting and sticking of nanocrystals during spray drying. DSC and FT-IR studies showed that glimepiride does not undergo polymorphic transformations during processing, and that the milling process induces changes in the hydrogen bonding patterns of glimepiride crystals. Lattice energy framework and topology analysis revealed the existence of a possible slip plane on the (101) surface, which was experimentally verified by PXRD analysis. Dissolution testing proved the superior performance of nanocrystals, and emphasized the important influence of the stabilizer on the dissolution rate of the nanocrystals.
T2  - Pharmaceutics
T1  - Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling
VL  - 12
IS  - 1
SP  - 53
DO  - 10.3390/pharmaceutics12010053
ER  - 
@article{
author = "Medarević, Đorđe and Ibrić, Svetlana and Vardaka, Elisavet and Mitrić, Miodrag and Nikolakakis, Ioannis and Kachrimanis, Kyriakos",
year = "2020",
abstract = "Nanocrystal formation for the dissolution enhancement of glimepiride was attempted by wet media milling. Different stabilizers were tested and the obtained nanosuspensions were solidified by spray drying in presence of mannitol, and characterized regarding their redispersibility by dynamic light scattering, physicochemical properties by differential scanning calorimetry (DSC), FT-IR spectroscopy, powder X-ray diffraction (PXRD), and scanning electron microcopy (SEM), as well as dissolution rate. Lattice energy frameworks combined with topology analysis were used in order to gain insight into the mechanisms of particle fracture. It was found that nanosuspensions with narrow size distribution can be obtained in presence of poloxamer 188, HPC-SL and Pharmacoat® 603 stabilizers, with poloxamer giving poor redispersibility due to melting and sticking of nanocrystals during spray drying. DSC and FT-IR studies showed that glimepiride does not undergo polymorphic transformations during processing, and that the milling process induces changes in the hydrogen bonding patterns of glimepiride crystals. Lattice energy framework and topology analysis revealed the existence of a possible slip plane on the (101) surface, which was experimentally verified by PXRD analysis. Dissolution testing proved the superior performance of nanocrystals, and emphasized the important influence of the stabilizer on the dissolution rate of the nanocrystals.",
journal = "Pharmaceutics",
title = "Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling",
volume = "12",
number = "1",
pages = "53",
doi = "10.3390/pharmaceutics12010053"
}
Medarević, Đ., Ibrić, S., Vardaka, E., Mitrić, M., Nikolakakis, I.,& Kachrimanis, K.. (2020). Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling. in Pharmaceutics, 12(1), 53.
https://doi.org/10.3390/pharmaceutics12010053
Medarević Đ, Ibrić S, Vardaka E, Mitrić M, Nikolakakis I, Kachrimanis K. Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling. in Pharmaceutics. 2020;12(1):53.
doi:10.3390/pharmaceutics12010053 .
Medarević, Đorđe, Ibrić, Svetlana, Vardaka, Elisavet, Mitrić, Miodrag, Nikolakakis, Ioannis, Kachrimanis, Kyriakos, "Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling" in Pharmaceutics, 12, no. 1 (2020):53,
https://doi.org/10.3390/pharmaceutics12010053 . .
1
9
1
6

A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions

Ivanovski, Valentin N.; Belošević-Čavor, Jelena; Rajić, Vladimir; Umićević, Ana; Marković, Smilja; Kusigerski, Vladan; Mitrić, Miodrag; Koteski, Vasil J.

(2019)

TY  - JOUR
AU  - Ivanovski, Valentin N.
AU  - Belošević-Čavor, Jelena
AU  - Rajić, Vladimir
AU  - Umićević, Ana
AU  - Marković, Smilja
AU  - Kusigerski, Vladan
AU  - Mitrić, Miodrag
AU  - Koteski, Vasil J.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8515
AB  - In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn 1 - x Fe x O (x = 0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe 3 + ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures. © 2019 Author(s).
T2  - Journal of Applied Physics
T1  - A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions
VL  - 126
IS  - 12
SP  - 125703
DO  - 10.1063/1.5095837
ER  - 
@article{
author = "Ivanovski, Valentin N. and Belošević-Čavor, Jelena and Rajić, Vladimir and Umićević, Ana and Marković, Smilja and Kusigerski, Vladan and Mitrić, Miodrag and Koteski, Vasil J.",
year = "2019",
abstract = "In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn 1 - x Fe x O (x = 0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe 3 + ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures. © 2019 Author(s).",
journal = "Journal of Applied Physics",
title = "A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions",
volume = "126",
number = "12",
pages = "125703",
doi = "10.1063/1.5095837"
}
Ivanovski, V. N., Belošević-Čavor, J., Rajić, V., Umićević, A., Marković, S., Kusigerski, V., Mitrić, M.,& Koteski, V. J.. (2019). A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions. in Journal of Applied Physics, 126(12), 125703.
https://doi.org/10.1063/1.5095837
Ivanovski VN, Belošević-Čavor J, Rajić V, Umićević A, Marković S, Kusigerski V, Mitrić M, Koteski VJ. A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions. in Journal of Applied Physics. 2019;126(12):125703.
doi:10.1063/1.5095837 .
Ivanovski, Valentin N., Belošević-Čavor, Jelena, Rajić, Vladimir, Umićević, Ana, Marković, Smilja, Kusigerski, Vladan, Mitrić, Miodrag, Koteski, Vasil J., "A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions" in Journal of Applied Physics, 126, no. 12 (2019):125703,
https://doi.org/10.1063/1.5095837 . .
4
5
5

Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder

Jugović, Dragana; Milović, Miloš; Popović, Maja; Kusigerski, Vladan; Škapin, Srečo Davor; Rakočević, Zlatko Lj.; Mitrić, Miodrag

(2019)

TY  - JOUR
AU  - Jugović, Dragana
AU  - Milović, Miloš
AU  - Popović, Maja
AU  - Kusigerski, Vladan
AU  - Škapin, Srečo Davor
AU  - Rakočević, Zlatko Lj.
AU  - Mitrić, Miodrag
PY  - 2019
UR  - https://linkinghub.elsevier.com/retrieve/pii/S0925838818336375
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/7897
AB  - The main goal of this research has been to investigate for the first time the effects of fluorination on the crystal structure, magnetic, and electrochemical properties of the P2-type NaxCoO2 powder. Sodium cobalt oxide with a P2-type structure is synthesized by a modified solid-state reaction consisting of alternating processes of rapid heating up to 750 °C and rapid cooling to the room temperature. The obtained powder is fluorinated using a gas-solid reaction with NH4HF2 as fluorinating agent. Fluorination causes a decrease of sodium content in the parent phase with the concurrent formation of the minor phases of Na2CO3 and NaF. The structure of NaxCoO2 in both powders is refined in P63/mmc space group. The results of the Rietveld refinement combined with the findings from the XPS measurements confirm the Na0.76CoO2 and Na0.44CoO1.96F0.04 stoichiometries for the pristine and fluorinated powders, respectively, which indicates that 4 at.% of fluorine ions per formula unit are incorporated in the structure. Preliminary electrochemical investigations have revealed an improved charge/discharge performance. The influence of fluorination on morphology and magnetic properties has also been examined. © 2018 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder
VL  - 774
SP  - 30
EP  - 37
DO  - 10.1016/j.jallcom.2018.09.372
ER  - 
@article{
author = "Jugović, Dragana and Milović, Miloš and Popović, Maja and Kusigerski, Vladan and Škapin, Srečo Davor and Rakočević, Zlatko Lj. and Mitrić, Miodrag",
year = "2019",
abstract = "The main goal of this research has been to investigate for the first time the effects of fluorination on the crystal structure, magnetic, and electrochemical properties of the P2-type NaxCoO2 powder. Sodium cobalt oxide with a P2-type structure is synthesized by a modified solid-state reaction consisting of alternating processes of rapid heating up to 750 °C and rapid cooling to the room temperature. The obtained powder is fluorinated using a gas-solid reaction with NH4HF2 as fluorinating agent. Fluorination causes a decrease of sodium content in the parent phase with the concurrent formation of the minor phases of Na2CO3 and NaF. The structure of NaxCoO2 in both powders is refined in P63/mmc space group. The results of the Rietveld refinement combined with the findings from the XPS measurements confirm the Na0.76CoO2 and Na0.44CoO1.96F0.04 stoichiometries for the pristine and fluorinated powders, respectively, which indicates that 4 at.% of fluorine ions per formula unit are incorporated in the structure. Preliminary electrochemical investigations have revealed an improved charge/discharge performance. The influence of fluorination on morphology and magnetic properties has also been examined. © 2018 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder",
volume = "774",
pages = "30-37",
doi = "10.1016/j.jallcom.2018.09.372"
}
Jugović, D., Milović, M., Popović, M., Kusigerski, V., Škapin, S. D., Rakočević, Z. Lj.,& Mitrić, M.. (2019). Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder. in Journal of Alloys and Compounds, 774, 30-37.
https://doi.org/10.1016/j.jallcom.2018.09.372
Jugović D, Milović M, Popović M, Kusigerski V, Škapin SD, Rakočević ZL, Mitrić M. Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder. in Journal of Alloys and Compounds. 2019;774:30-37.
doi:10.1016/j.jallcom.2018.09.372 .
Jugović, Dragana, Milović, Miloš, Popović, Maja, Kusigerski, Vladan, Škapin, Srečo Davor, Rakočević, Zlatko Lj., Mitrić, Miodrag, "Effects of fluorination on the structure, magnetic and electrochemical properties of the P2-type NaxCoO2 powder" in Journal of Alloys and Compounds, 774 (2019):30-37,
https://doi.org/10.1016/j.jallcom.2018.09.372 . .
11
10
9

Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities

Tomić, Nataša Z.; Vuksanović, Marija M.; Đokić, Veljko R.; Mitrić, Miodrag; Simić, Milena R.; Pavlović, Vladimir B.; Jančić-Heinemann, Radmila; Marinković, Aleksandar D.

(2019)

TY  - JOUR
AU  - Tomić, Nataša Z.
AU  - Vuksanović, Marija M.
AU  - Đokić, Veljko R.
AU  - Mitrić, Miodrag
AU  - Simić, Milena R.
AU  - Pavlović, Vladimir B.
AU  - Jančić-Heinemann, Radmila
AU  - Marinković, Aleksandar D.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8650
AB  - A facile synthesis was employed for three polyhedral oligo silsequioxanes (POSS), obtaining incompletely condensed structures with fern-like and cubic morphologies. Proton nuclear magnetic resonance spectroscopy (1H NMR) indicated the successful synthesis of the proposed POSS structures. The hydroxyl groups affected the manner and type of POSS morphology, as seen under a scanning electron microscope (SEM) and a transmission electron microscope (TEM). Fourier-transform infrared spectroscopy (FTIR) showed the availability of surface hydroxyl groups that contributed to the formation of a higher amount of char residue, as found from TGA analysis. The highest decomposition temperature (281 °C) and the least char residue were found for a cross-linkable POSS, obtained by esterification of the hydroxyl groups with methacryloyl chloride. © 2019 Elsevier Ltd
T2  - Polyhedron
T1  - Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities
VL  - 171
SP  - 299
EP  - 304
DO  - 10.1016/j.poly.2019.06.059
ER  - 
@article{
author = "Tomić, Nataša Z. and Vuksanović, Marija M. and Đokić, Veljko R. and Mitrić, Miodrag and Simić, Milena R. and Pavlović, Vladimir B. and Jančić-Heinemann, Radmila and Marinković, Aleksandar D.",
year = "2019",
abstract = "A facile synthesis was employed for three polyhedral oligo silsequioxanes (POSS), obtaining incompletely condensed structures with fern-like and cubic morphologies. Proton nuclear magnetic resonance spectroscopy (1H NMR) indicated the successful synthesis of the proposed POSS structures. The hydroxyl groups affected the manner and type of POSS morphology, as seen under a scanning electron microscope (SEM) and a transmission electron microscope (TEM). Fourier-transform infrared spectroscopy (FTIR) showed the availability of surface hydroxyl groups that contributed to the formation of a higher amount of char residue, as found from TGA analysis. The highest decomposition temperature (281 °C) and the least char residue were found for a cross-linkable POSS, obtained by esterification of the hydroxyl groups with methacryloyl chloride. © 2019 Elsevier Ltd",
journal = "Polyhedron",
title = "Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities",
volume = "171",
pages = "299-304",
doi = "10.1016/j.poly.2019.06.059"
}
Tomić, N. Z., Vuksanović, M. M., Đokić, V. R., Mitrić, M., Simić, M. R., Pavlović, V. B., Jančić-Heinemann, R.,& Marinković, A. D.. (2019). Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities. in Polyhedron, 171, 299-304.
https://doi.org/10.1016/j.poly.2019.06.059
Tomić NZ, Vuksanović MM, Đokić VR, Mitrić M, Simić MR, Pavlović VB, Jančić-Heinemann R, Marinković AD. Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities. in Polyhedron. 2019;171:299-304.
doi:10.1016/j.poly.2019.06.059 .
Tomić, Nataša Z., Vuksanović, Marija M., Đokić, Veljko R., Mitrić, Miodrag, Simić, Milena R., Pavlović, Vladimir B., Jančić-Heinemann, Radmila, Marinković, Aleksandar D., "Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities" in Polyhedron, 171 (2019):299-304,
https://doi.org/10.1016/j.poly.2019.06.059 . .
1
3
3
3

Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase

Radovanović, Neda; Malagurski, Ivana; Lević, Steva; Gordić, Milan V.; Petrović, Jelena M.; Pavlović, Vladimir B.; Mitrić, Miodrag; Nešić, Aleksandra; Dimitrijević-Branković, Suzana I.

(2019)

TY  - JOUR
AU  - Radovanović, Neda
AU  - Malagurski, Ivana
AU  - Lević, Steva
AU  - Gordić, Milan V.
AU  - Petrović, Jelena M.
AU  - Pavlović, Vladimir B.
AU  - Mitrić, Miodrag
AU  - Nešić, Aleksandra
AU  - Dimitrijević-Branković, Suzana I.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8454
AB  - New agar-based composite films with increasing Cu-carbonate and Cu-phosphate mineral phase content were prepared by in situ mineralization and solvent casting method. SEM and optical analysis revealed that Cu-carbonate phase had better compatibility with agar matrix than Cu-phosphate phase. Incorporation of both mineral phases improved mechanical and water vapor barrier properties of the obtained mineralized films, in concentration dependent manner. When 5 mM of carbonate precursor was incorporated into agar matrix, mechanical resistance was enchanced for 44% and water vapor barrier property for 40%. The release of Cu (II) was higher in acidic conditions for both mineralized composites and remained in the range of specific release limits for this metal. In addition, both mineralized composite films exhibited distinctive antimicrobial activity against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. Overall, the Cu-carbonate and Cu-phosphate mineralized agar films showed potential to be used for food packaging materials, agriculture or medical purposes. © 2019 Elsevier Ltd
T2  - European Polymer Journal
T1  - Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase
VL  - 119
SP  - 352
EP  - 358
DO  - 10.1016/j.eurpolymj.2019.08.004
ER  - 
@article{
author = "Radovanović, Neda and Malagurski, Ivana and Lević, Steva and Gordić, Milan V. and Petrović, Jelena M. and Pavlović, Vladimir B. and Mitrić, Miodrag and Nešić, Aleksandra and Dimitrijević-Branković, Suzana I.",
year = "2019",
abstract = "New agar-based composite films with increasing Cu-carbonate and Cu-phosphate mineral phase content were prepared by in situ mineralization and solvent casting method. SEM and optical analysis revealed that Cu-carbonate phase had better compatibility with agar matrix than Cu-phosphate phase. Incorporation of both mineral phases improved mechanical and water vapor barrier properties of the obtained mineralized films, in concentration dependent manner. When 5 mM of carbonate precursor was incorporated into agar matrix, mechanical resistance was enchanced for 44% and water vapor barrier property for 40%. The release of Cu (II) was higher in acidic conditions for both mineralized composites and remained in the range of specific release limits for this metal. In addition, both mineralized composite films exhibited distinctive antimicrobial activity against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. Overall, the Cu-carbonate and Cu-phosphate mineralized agar films showed potential to be used for food packaging materials, agriculture or medical purposes. © 2019 Elsevier Ltd",
journal = "European Polymer Journal",
title = "Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase",
volume = "119",
pages = "352-358",
doi = "10.1016/j.eurpolymj.2019.08.004"
}
Radovanović, N., Malagurski, I., Lević, S., Gordić, M. V., Petrović, J. M., Pavlović, V. B., Mitrić, M., Nešić, A.,& Dimitrijević-Branković, S. I.. (2019). Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase. in European Polymer Journal, 119, 352-358.
https://doi.org/10.1016/j.eurpolymj.2019.08.004
Radovanović N, Malagurski I, Lević S, Gordić MV, Petrović JM, Pavlović VB, Mitrić M, Nešić A, Dimitrijević-Branković SI. Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase. in European Polymer Journal. 2019;119:352-358.
doi:10.1016/j.eurpolymj.2019.08.004 .
Radovanović, Neda, Malagurski, Ivana, Lević, Steva, Gordić, Milan V., Petrović, Jelena M., Pavlović, Vladimir B., Mitrić, Miodrag, Nešić, Aleksandra, Dimitrijević-Branković, Suzana I., "Tailoring the physico-chemical and antimicrobial properties of agar-based films by in situ formation of Cu-mineral phase" in European Polymer Journal, 119 (2019):352-358,
https://doi.org/10.1016/j.eurpolymj.2019.08.004 . .
3
5
5
5

Combined magnetic and structural characterization of hidrothermal bismuth ferrite (BiFeO3) nanoparticles

Maletaškić, Jelena; Čebela, Maria; Prekajski-Đorđević, Marija D.; Kozlenko, Denis; Kichanov, Sergey; Mitrić, Miodrag; Matović, Branko

(2019)

TY  - JOUR
AU  - Maletaškić, Jelena
AU  - Čebela, Maria
AU  - Prekajski-Đorđević, Marija D.
AU  - Kozlenko, Denis
AU  - Kichanov, Sergey
AU  - Mitrić, Miodrag
AU  - Matović, Branko
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8429
AB  - Bismuth ferrite (BiFeO3) was synthesized by hydrothermal method. The crystal and magnetic structures of BiFeO3 have been studied by means of X-ray diffraction and neutron powder diffraction at ambient temperature. Microstructure was analysed by scanning electron microscopy. Quantitative phase analysis by the Rietveld method was conducted and crystallite sizes of 27 nm were determined from the XRD line broadening. The magnetic structure of BiFeO3 is described by the G-type antiferromagnetic order with magnetic peak located at 4.6 Å and a noticeable magnetic contribution to a reflection located at 2.4 Å in the diffraction pattern. The values of the ordered magnetic moment of Fe ions μFe=3.8(1) μB, obtained at ambient conditions, are consistent with those determined earlier. The magnetic moments in the crystal plane z = const are arranged in parallel, changing the direction from [100] to [ 110 ] when moving from one to the other z = const plane. © 2018 Authors. Published by the International Institute for the Science of Sintering.
T2  - Science of Sintering
T1  - Combined magnetic and structural characterization of hidrothermal bismuth ferrite (BiFeO3) nanoparticles
VL  - 51
IS  - 1
SP  - 71
EP  - 79
DO  - 10.2298/SOS1901071M
ER  - 
@article{
author = "Maletaškić, Jelena and Čebela, Maria and Prekajski-Đorđević, Marija D. and Kozlenko, Denis and Kichanov, Sergey and Mitrić, Miodrag and Matović, Branko",
year = "2019",
abstract = "Bismuth ferrite (BiFeO3) was synthesized by hydrothermal method. The crystal and magnetic structures of BiFeO3 have been studied by means of X-ray diffraction and neutron powder diffraction at ambient temperature. Microstructure was analysed by scanning electron microscopy. Quantitative phase analysis by the Rietveld method was conducted and crystallite sizes of 27 nm were determined from the XRD line broadening. The magnetic structure of BiFeO3 is described by the G-type antiferromagnetic order with magnetic peak located at 4.6 Å and a noticeable magnetic contribution to a reflection located at 2.4 Å in the diffraction pattern. The values of the ordered magnetic moment of Fe ions μFe=3.8(1) μB, obtained at ambient conditions, are consistent with those determined earlier. The magnetic moments in the crystal plane z = const are arranged in parallel, changing the direction from [100] to [ 110 ] when moving from one to the other z = const plane. © 2018 Authors. Published by the International Institute for the Science of Sintering.",
journal = "Science of Sintering",
title = "Combined magnetic and structural characterization of hidrothermal bismuth ferrite (BiFeO3) nanoparticles",
volume = "51",
number = "1",
pages = "71-79",
doi = "10.2298/SOS1901071M"
}
Maletaškić, J., Čebela, M., Prekajski-Đorđević, M. D., Kozlenko, D., Kichanov, S., Mitrić, M.,& Matović, B.. (2019). Combined magnetic and structural characterization of hidrothermal bismuth ferrite (BiFeO3) nanoparticles. in Science of Sintering, 51(1), 71-79.
https://doi.org/10.2298/SOS1901071M
Maletaškić J, Čebela M, Prekajski-Đorđević MD, Kozlenko D, Kichanov S, Mitrić M, Matović B. Combined magnetic and structural characterization of hidrothermal bismuth ferrite (BiFeO3) nanoparticles. in Science of Sintering. 2019;51(1):71-79.
doi:10.2298/SOS1901071M .
Maletaškić, Jelena, Čebela, Maria, Prekajski-Đorđević, Marija D., Kozlenko, Denis, Kichanov, Sergey, Mitrić, Miodrag, Matović, Branko, "Combined magnetic and structural characterization of hidrothermal bismuth ferrite (BiFeO3) nanoparticles" in Science of Sintering, 51, no. 1 (2019):71-79,
https://doi.org/10.2298/SOS1901071M . .
2
2

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8103
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
VL  - 8
IS  - 1
SP  - 133
EP  - 147
DO  - 10.1007/s40145-018-0301-5
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
volume = "8",
number = "1",
pages = "133-147",
doi = "10.1007/s40145-018-0301-5"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics, 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5 .
Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 . .
1
6
9
8

The effect of ball milling on properties of sintered manganese-doped alumina

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Balać, Igor; Đorđević, Antonije; Pavlović, Vladimir B.

(2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/8441
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
VL  - 30
IS  - 11
SP  - 2533
EP  - 2540
DO  - 10.1016/j.apt.2019.07.033
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
volume = "30",
number = "11",
pages = "2533-2540",
doi = "10.1016/j.apt.2019.07.033"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology, 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033
Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 . .
2
3
4